Section 02 Video Audio Switchers & Matrices Part 1

User Manual: Section 02 - Video-Audio Switchers & Matrices part 1

Open the PDF directly: View PDF PDF.
Page Count: 29

Page 2.1
GROUP 2
GROUP 2
GROUP 2 GROUP 2
GROUP 2
Video-Audio Switchers and Matrices
Kramer Electronics has a full line of Video/Audio Switchers and Matrices. They differ in
the number of inputs and outputs, format of operation (Composite video, Component, Audio
etc.) and switching method, (i.e., whether they switch during the vertical interval or not,
whether they are electronically, RS-232 or mechanically controlled.)
The group includes three categories:
!
!!
!
19-inch rack-mount Switchers and Matrices.
These have full broadcast specifications. They are all manual and RS-232 controlled and
offer superb specifications. Some have RS-422/485 and/or contact closure control options.
They are all housed in rack-mountable enclosures.
!
!!
!
Desktop Electronic Switchers.
The Switchers in this family have full industrial specifications. Some have a link option for
remote control, for activating one machine by another, or to extend the number of inputs by
adding machines. They occupy very little desk space, and most have optional rack adaptors
which house two units side-by-side in a 19” rack.
!
!!
!
Mechanical Switchers and Matrices.
These switchers have full industrial specifications and very moderate prices. Most are
video/audio switchers, offering simple and economic solutions for every video/audio
application. Due to unique design the video bandwidth is excellent. Some are 19” rack-
mountable and some are smaller, with optional rack-mount adaptors.
Applications:
# Live Broadcast and studio signal routing.
# Video production routing.
# Add inputs to existing switchers and mixers.
# Showrooms, shops and point-of-sale, for equipment (cameras, VCRs, monitors)
comparison.
# Remote source monitoring.
# For scanning alarm cameras in security applications.
Page 2.2
GROUP 2
GROUP 2
TABLE 2.1: Switchers by Format
2.1.1: Switchers: Composite Video
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VS-24N CV Desktop AUT 2.34 2 1 150 MHz Standby AV switcher with Remote control.
VS-33V CV mini VIS 2.35 3 1 46 MHz Vertical Interval Switcher, 12 VDC feed.
VP-23 CV 19" 2U E 5.9 4 1 470 MHz Presentation switcher with 4 each VGA, Y/C, CV + audio
inputs, 1 each outputs, + Mic in, talk-over, RS-232.
VS-401XL CV 19" 1U VIS 2.12 4 1 250 MHz AV Switcher with RS-232/RS-485 and remote control.
VS-421 CV Desktop VIS 2.36 4 1 300 MHz Video/Stereo/Balanced mono Vertical Interval + remote
control option.
VS-411 CV 19" 1U VIS 2.13 4 1 250 MHz With RS-232/RS-485, Balanced Audio, remote control.
4x1V CV TOOL M 9.13 4 1 400 MHz On RCAs.
4x1VB CV TOOL M 9.14 4 1 400 MHz On BNCs.
VS-402 CV 19" 2U VIS 2.14 4 2 40 MHz Looping, with RS-232.
VS-44AV CV 19" 1U M 2.53 4 4 220 MHz 4 crosspoint mechanical AV Matrix.
VS-4E CV compact M 2.54 4 4 475 MHz 4x4, single crosspoint AV switcher.
VS-6EII CV Desktop E 2.41 4 4 8 MHz Video / Audio Stereo Matrix.
VS-4X4YC CV 19" 1U VIS 2.16 4 4 50 MHz Y/C - CV- Audio Stereo Matrix with RS-232.
VS-6YC CV 19" 1U E 2.15 4 4 37 MHz Y/C - CV- Audio Stereo Matrix.
VS-55 CV compact E 2.37 5 1 270 MHz expandable universal dual channel switcher with 12 VDC
feed.
VS-55V CV compact VIS 2.38 5 1 150 MHz expandable Vertical Interval Video Switcher with 12 VDC
feed.
VS-5X4 CV 19" 1U VIS 2.17 5 4 30 MHz CV/Audio Stereo programmable Matrix + RS-232 control.
VS-16A CV Desktop E 2.43 6x2 1x2 540 MHz Programmable Dual-channel Scanner with Remote and RS-
485 control.
VS-601XL CV 19" 1U VIS 2.12 6 1 250 MHz AV Switcher with RS-232/RS-485 and remote control.
VS-611 CV 19" 1U VIS 2.13 6 1 250 MHz With RS-232/RS-485, Balanced Audio, remote control.
VS-16N CV Desktop VIS 2.42 6 1 40 MHz Programmable Automatic Alarm Camera Scanner, Remote +
RS-485.
VS-602 CV 19" 2U VIS 2.14 6 2 40 MHz Looping AV Matrix with RS-232 control.
VS-606XL CV 19" 2U VIS 2.18 6 6 200 MHz CV / Audio Stereo Matrix with RS-232 / RS-485 control.
VS-646 CV 19" 2U VIS 2.19 6 6 200 MHz CV / Balanced Audio Stereo Matrix with RS-232/RS-485.
VS-801XL CV 19" 1U VIS 2.12 8 1 250 MHz AV Switcher with RS-232/RS-485 and remote control.
VS-81AV CV 19" 1U M 2.49 8 1 400 MHz Video + Audio Stereo Switcher.
VS-811 CV 19" 1U VIS 2.13 8 1 250 MHz With RS-232/RS-485, Balanced Audio, remote control.
VS-81V CV Desktop M 2.45 8 1 400 MHz Single crosspoint Video Switcher.
VS-802 CV 19" 2U VIS 2.14 8 2 40 MHz Looping AV Matrix with RS-232 control.
VS-84 CV compact m 2.51 8 4 200 MHz Single crosspoint Video + Audio Stereo Switcher.
VS-808XL CV 19" 2U VIS 2.22 8 8 200 MHz CV / Audio Stereo with RS-232 / RS-485 control.
VS-848 CV 19" 2U VIS 2.23 8 8 200 MHz CV / Balanced Audio Stereo Matrix with RS-232/RS-485.
VS-1001XL CV 19" 1U VIS 2.12 10 1 250 MHz AV Switcher with RS-232/RS-485 and remote control.
Page 2.3
GROUP 2
2.1.1: Switchers: Composite Video (cont.)
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VS-1011 CV 19" 1U VIS 2.13 10 1 250 MHz With RS-232/RS-485, Balanced Audio, remote control.
VS-1201XL CV 19" 1U VIS 2.12 12 1 250 MHz AV Switcher with RS-232/RS-485 and remote control.
VS-1211 CV 19" 1U VIS 2.13 12 1 250 MHz With RS-232/RS-485, Balanced Audio, remote control.
VS-1202 CV 19" 2U VIS 2.14 12 2 40 MHz Looping AV Matrix with RS-232.
VS-1202YC CV 19" 2U VIS 2.24 12 2 37 MHz Y/C-CV-Audio Stereo Matrix with RS-232.
VS-2016 CV 19" 1U VIS 2.25 16 1 80 MHz Expandable CV / Component Switcher with RS-232.
VS-2516 CV 19" 2U VIS 2.26 16 16 69 MHz CV-Y/C-YUV-RGBS expandable Matrix with RS-232.
VS-120 CV 19" 2U VIS 2.29 20 2x1 25 MHz Sequential AV Switcher/Scanner with RS-232 / RS-485 control.
VS-28 CV 19" 2U AUT 2.30 8 x 2 8 x 1 500 MHz Standby Switcher + remote + LED indication.
2.1.2: Switchers: Component Video
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VS-2053 RGBHV 19" 1U VIS 2.10 3 1 400 MHz Delayed or Vertical Interval switching and RS-232.
VS-2031N RGBS 19" 1U E 2.9 3 1 550 MHz With RS-232.
VS-2516 RGBS 19" 2U VIS 2.26 4 4 69 MHz CV-Y/C-YUV-RGBS expandable Matrix with RS-232.
VS-2516 YUV 19" 2U VIS 2.26 5 5 69 MHz CV-Y/C-YUV-RGBS expandable Matrix with RS-232.
VS-2042 YUV 19" 1U VIS 2.11 4 2 75 MHz YUV expandable Matrix with RS-232
2.1.3: Switchers: Accessories
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VP-14 RS232 TOOL NA 9.24 1 3 NA Bi-directional and programmable port extender.
VP-43 RS232 TOOL NA 9.25 1 2 NA Range extender, 2 units extend RS-232 up to 1.2 km.
VS-1N RS232 compact E 2.44 1 1 NA Remote Controller for switchers and matrices with RS-232.
VS-2000
RS-232
RS-485 19" 2U
E
2.31
7
1 7
1 NA
Remote Controller for all switchers and Matrices
with RS-232/RS-422.
VS-3000
RS-232
RS-485 19" 2U
E
2.32
7
1 7
1 NA
Master programmable remote control. Remote contact
closure and keyboard.
VS-4228 RS-422 19" 1U E 2.33 8 8 NA 8 Port RS-422 Matrix with RS-232 and RS-485 control.
2.1.4: Switchers: Digital Video
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
SD-7308 SDI 19" 1U VIS 6.6 8 1x4 NA Multistandard 8x1 SDI Switcher and 1:4 SDI DA, with
reclocking and equalization.
SD-7388 SDI 19" 2U VIS 6.7 8 8 NA A Multistandard 8 x 8 SDI Programmable matrix with analog and
optional digital sync genlock input and RS-232/RS-485 control.
SD-7316 SDI 19" U VIS 6.8 16 16 NA A Multistandard 16 x 16 SDI Programmable matrix with
analog and optional digital sync genlock input and RS-
232/RS-485 control.
Page 2.4
GROUP 2
2.1.5: Switchers: VGA
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VP-201 VGA TOOL M 9.21 2 1 320 MHz 2x1 Mechanical Switcher.
VP-211 VGA TOOL AUT 9.22 2 1 517 MHz A VGA/audio "standby" automatic switcher.
VP-222 VGA TOOL M 9.23 2 2 365 MHz 2x1 Mechanical Switcher and a 1:2 DA.
VP-31 VGA Desktop E 5.10 3 1 450 MHz 3 x 1 VGA/XGA Switcher.
VP-32 VGA Half 19” E 5.11 3 2 300 MHz 3 x 1:2 VGA / Audio-stereo Switcher and DA.
VP-23 VGA 19" 2U E 5.9 4 1 315 MHz Presentation switcher with 4 each VGA, Y/C, CV + audio
inputs, 1 each outputs, + Mic in, talk-over, RS-232.
VP-61RS VGA 19" 1U E 5.12 6 1 180 MHz With RS-232.
2.1.6: Switchers: s-Video (Y/C)
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
4x1S YC TOOL M 9.15 4 1 400 MHz On 4P connectors.
VP-23 YC 19" 2U E 5.9 4 1
260 MHz Presentation switcher with 4 each VGA, Y/C, CV + audio
inputs, 1 each outputs, + Mic in, talk-over, RS-232.
VS-4YC YC compact M 2.55 4 4 280 MHz
(Y) Single crosspoint Y/C + Audio Stereo Switcher.
VS-4X4YC YC 19" 1U VIS 2.16 4 4 50 MHz Y/C - CV- Audio Stereo Matrix with RS-232.
VS-6YC YC 19" 1U E 2.15 4 4 37 MHz Y/C - CV- Audio Stereo Matrix.
VS-55YC YC compact VIS 2.40 5 1 120 MHz Expandable Vertical Interval Y/C Switcher with 12 VDC feed.
VS-81YC YC Desktop M 2.46 8 1 375 MHz
(Y) Single crosspoint s-Video Switcher.
VS-81AYC YC 19" 1U M 2.50 8 1 350 MHz
(Y) Super-Video (Y/C) + Audio Stereo Switcher.
VS-2081S YC 19" 1U VIS 2.20 8 2x1 60 MHz (Y) Expandable Y/C switcher + RS-232.
VS-84YC YC 19" 1U M 2.52 8 4 200 MHz Single crosspoint Y/C + Audio Stereo Switcher.
VS-2516 YC 19" 2U VIS 2.26 8 8 69 MHz CV-Y/C-YUV-RGBS expandable Matrix with RS-232.
VS-1202YC YC 19" 2U VIS 2.24 12 2 37 MHz Y/C-CV-Audio Stereo Matrix with RS-232.
2.1.7: Switchers: AUDIO
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VS-55A A compact E 2.39 5 1 20 kHz Expandable Audio Stereo Switcher with 12 VDC feed.
VS-81X A Desktop M 2.48 8 1 25 kHz Single crosspoint Balanced Audio Switcher on XLRs.
VS-81A A Desktop M 2.47 8 1 25 kHz Single crosspoint Audio Stereo Switcher on RCAs.
VS-2481 A 19" 1U E 2.21 8 2x1 20 kHz Expandable Balanced Audio switcher on XLRs with RS-232.
VS-2216 A 19" 2U E 2.27 16 16 20 kHz Stereo expandable matrix + RS-232
VS-2616 A 19" 2U E 2.28 16 16 20 kHz Balanced Stereo Matrix + RS-232.
VP-23 A 19" 2U E 5.9 4 1 40 kHz Presentation switcher with 4 each VGA, Y/C, CV + audio
inputs, 1 each outputs, + Mic in, talk-over, RS-232.
Page 2.5
GROUP 2
TABLE 2.2: Switchers by Inputs & Outputs
2.2.1: Switchers: 2 inputs
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VS-24N CV compact AUT 2.34 2 1 150 MHz Standby AV switcher with Remote control.
VP-201 VGA TOOL M 9.21 2 1 320 MHz 2x1 Mechanical Switcher.
VP-222 VGA TOOL M 9.23 2 2 365 MHz 2x1 Mechanical Switcher and a 1:2 DA.
VP-211 VGA TOOL AUT 9.22 2 1 517 MHz A VGA/audio "standby" automatic switcher.
2.2.2: Switchers: 3 inputs
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VS-33V CV mini VIS 2.35 3 1 46 MHz Vertical Interval Switcher, 12 VDC feed.
VS-2053 RGBHV 19" 1U VIS 2.10 3 1 400 MHz Delayed or Vertical Interval switching and RS-232.
VS-2031N RGBS 19" 1U E 2.9 3 1 550 MHz With RS-232.
VP-31 VGA Desktop E 5.10 3 1 450 MHz 3 x 1 VGA/XGA Switcher.
VP-32 VGA Half 19” E 5.11 3 2x1 300 MHz 3 x 1:2 VGA / Audio-stereo Switcher and DA.
2.2.3: Switchers: 4 X 1
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VS-401XL CV 19" 1U VIS 2.12 4 1 250 MHz AV Switcher with RS-232/RS-485 and remote control.
VS-421 CV Desktop VIS 2.36 4 1 300 MHz Video/Stereo/Balanced mono Vertical Interval with remote
control option.
VS-411 CV 19" 1U VIS 2.13 4 1 250 MHz With RS-232/RS-485, Balanced Audio, remote control.
4x1V CV TOOL M 9.13 4 1 400 MHz On RCAs.
4x1VB CV TOOL M 9.14 4 1 400 MHz On BNCs.
VP-23 VGA 19" 2U E 5.9 4 1 315 MHz
VP-23 CV 19" 2U E 5.9 4 1 470 MHz
VP-23 YC 19" 2U E 5.9 4 1 260 MHz
VP-23 A 19" 2U E 5.9 4 1 40 kHz
Presentation switcher with 4 each VGA, Y/C, CV + audio
inputs, 1 each outputs, + Mic in, talk-over, RS-232.
4x1S YC TOOL M 9.15 4 1 400 MHz On 4P connectors.
2.2.4: Switchers: 4 X 2
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VS-402 CV 19" 2U VIS 2.14 4 2 40 MHz Looping, with RS-232.
VS-2042 YUV 19" 1U VIS 2.11 4 2 75 MHz YUV expandable Matrix with RS-232.
Page 2.6
GROUP 2
2.2.5: Switchers: 4 X 4
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VS-44AV CV 19" 1U M 2.53 4 4 220 MHz 4 crosspoint mechanical AV Matrix.
VS-4E CV compact M 2.54 4 4 475 MHz 4x4, single crosspoint AV switcher.
VS-6EII CV Desktop E 2.41 4 4 8 MHz Video / Audio Stereo Matrix.
VS-4X4YC CV 19" 1U VIS 2.16 4 4 50 MHz Y/C - CV- Audio Stereo Matrix with RS-232.
VS-6YC CV 19" 1U E 2.15 4 4 37 MHz Y/C - CV- Audio Stereo Matrix.
VS-2516 RGBS 19" 2U VIS 2.26 4 4 69 MHz CV-Y/C-YUV-RGBS expandable Matrix with RS-232.
VS-4YC YC compact M 2.55 4 4 280 MHz (Y) Single crosspoint Y/C + Audio Stereo Switcher.
VS-4X4YC YC 19" 1U VIS 2.16 4 4 50 MHz Y/C - CV- Audio Stereo Matrix with RS-232.
VS-6YC YC 19" 1U E 2.15 4 4 37 MHz Y/C - CV- Audio Stereo Matrix.
2.2.6: Switchers: 5 X 1
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VS-55A A compact E 2.39 5 1 20 kHz Expandable Audio Stereo Switcher with 12 VDC feed.
VS-55 CV compact E 2.37 5x2 1x2 270 MHz Expandable universal dual channel switcher, 12 VDC feed.
VS-55V CV compact VIS 2.38 5 1 150 MHz Expandable Vertical Interval Video Switcher, 12 VDC feed.
VS-55YC YC compact VIS 2.40 5 1 120 MHz Expandable Vertical Interval Y/C Switcher with 12 VDC feed.
2.2.7: Switchers: 5 X 4
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VS-5X4 CV 19" 1U VIS 2.17 5 4 30 MHz CV/Audio Stereo programmable Matrix + RS-232 control.
2.2.8: Switchers: 5 X 5
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VS-2516 YUV 19" 2U VIS 2.26 5 5 69 MHz CV-Y/C-YUV-RGBS expandable Matrix with RS-232.
2.2.9: Switchers: 6 X 1
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VS-16A CV Desktop E 2.43 6x2 1x2 540 MHz Programmable Dual-channel Scanner with Remote and RS-
485 control.
VS-601XL CV 19" 1U VIS 2.12 6 1 250 MHz AV Switcher with RS-232/RS-485 and remote control.
VS-611 CV 19" 1U VIS 2.13 6 1 250 MHz With RS-232/RS-485, Balanced Audio, remote control.
VS-16N CV Desktop VIS 2.42 6 1 40 MHz Programmable Automatic Alarm Camera Scanner, Remote +
RS-485 control.
VP-61RS VGA 19" 1U E 5.12 6 1 180 MHz With RS-232.
2.2.10: Switchers: 6 X 2
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VS-602 CV 19" 2U VIS 2.14 6 2 40 MHz Looping AV Matrix with RS-232 control.
Page 2.7
GROUP 2
2.2.11: Switchers: 6 X 6
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VS-606XL CV 19" 2U VIS 2.18 6 6 200 MHz CV / Audio Stereo Matrix with RS-232 / RS-485 control.
VS-646 CV 19" 2U VIS 2.19 6 6 200 MHz CV / Balanced Audio Stereo Matrix with RS-232/RS-485.
2.2.12: Switchers: 8 X 1
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VS-81X A Desktop M 2.48 8 1 25 kHz Single crosspoint Balanced Audio Switcher on XLRs.
VS-81A A Desktop M 2.47 8 1 25 kHz Single crosspoint Audio Stereo Switcher on RCAs.
VS-801XL CV 19" 1U VIS 2.12 8 1 250 MHz AV Switcher with RS-232/RS-485 and remote control.
VS-81AV CV 19" 1U M 2.49 8 1 400 MHz Video + Audio Stereo Switcher.
VS-811 CV 19" 1U VIS 2.13 8 1 250 MHz With RS-232/RS-485, Balanced Audio, remote control.
VS-81V CV Desktop M 2.45 8 1 400 MHz Single crosspoint Video Switcher.
VS-81YC CV Desktop M 2.46 8 1 375 MHz (Y) Single crosspoint s-Video Switcher.
VS-28 CV 19" 2U AUT 2.30 8 x 2 8 x 1 500 MHz Standby Switcher + remote + LED indication.
VS-81AYC YC 19" 1U” M 2.50 8 1 350 MHz (Y) Super-Video (Y/C) + Audio Stereo Switcher.
2.2.13: Switchers: 8 X 2
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VS-802 CV 19" 2U VIS 2.14 8 2 40 MHz Looping AV Matrix with RS-232 control.
2.2.14: Switchers: 8 X 4
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VS-84 CV 19" 1U M 2.51 8 4 200 MHz Single crosspoint Video + Audio Stereo Switcher.
VS-84YC YC 19" 1U M 2.52 8 4 200 MHz Single crosspoint Y/C + Audio Stereo Switcher.
2.2.15: Switchers: 8 X 8
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VS-808XL CV 19" 2U VIS 2.22 8 8 200 MHz CV / Audio Stereo with RS-232 / RS-485 control.
VS-848 CV 19" 2U VIS 2.23 8 8 200 MHz CV / Balanced Audio Stereo Matrix with RS-232/RS-485
control.
VS-2516 YC 19" 2U VIS 2.26 8 8 69 MHz CV-Y/C-YUV-RGBS expandable Matrix with RS-232.
2.2.16: Switchers: 10 X 1
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VS-1001XL CV 19" 2U VIS 2.12 10 1 250 MHz AV Switcher with RS-232/RS-485 and remote control.
VS-1011 CV 19" 2U VIS 2.13 10 1 250 MHz With RS-232/RS-485, Balanced Audio, remote control.
2.2.17: Switchers: 12 X 1
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VS-1201XL CV 19" 2U VIS 2.12 12 1 250 MHz AV Switcher with RS-232/RS-485 and remote control.
VS-1211 CV 19" 2U VIS 2.13 12 1 250 MHz With RS-232/RS-485, Balanced Audio, remote control.
Page 2.8
GROUP 2
2.2.18: Switchers: 12 X 2
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VS-1202 CV 19" 2U VIS 2.14 12 2 40 MHz Looping AV Matrix with RS-232.
VS-1202YC CV 19" 2U VIS 2.24 12 2 37 MHz Y/C-CV-Audio Stereo Matrix with RS-232.
VS-1202YC YC 19" 2U VIS 2.24 12 2 37 MHz Y/C-CV-Audio Stereo Matrix with RS-232.
2.2.19: Switchers: 16 X 1
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VS-2016 CV 19" 1U VIS 2.25 16 1 80 MHz Expandable CV / Component Switcher with RS-232.
2.2.20: Switchers: 16 X 16
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VS-2216 A 19" 2U E 2.27 16 16 20 kHz Stereo expandable matrix + RS-232
VS-2616 A 19" 2U E 2.28 16 16 20 kHz Balanced Stereo Matrix + RS-232.
VS-2516 CV 19" 2U VIS 2.26 16 16 69 MHz CV-Y/C-YUV-RGBS expandable Matrix with RS-232.
SD-7316 SDI 19" 2U VIS 6.8 16 16 NA A Multistandard 16 x 16 SDI Programmable matrix with
analog and optional Digital sync genlock input and
RS-232/RS-485 control.
2.2.21: Switchers: 20 X 1
Model Format Size Type Page Inputs Outputs Bandwidth Remarks
VS-120 CV 19" 2U VIS 2.29 20 2 x 1 25 MHz Sequential AV Switcher/Scanner with RS-232 / RS-485
control.
Page 2.9
GROUP 2
3x1 RGBS Switcher VS-2031N
The Kramer VS-2031N is a high performance 3x1 switcher designed for component video
signals such as RGBS using BNC connectors. One of three sources can be routed to one monitor,
projector, or other receiving device. Since the signal path is passive using ultra-high quality relays, the
VS-2031N can also operate in the reverse direction allowing a single source to be routed to any of
three destinations.
The VS-2031N can be controlled by front panel buttons or by RS-232 commands from a touch-
screen control system or PC. For applications requiring external control via a personal computer, K-
Switch Windows™ compatible control software is included at no additional cost. Video bandwidth
exceeding 550 MHz ensures that the VS-2031N remains transparent even in critical broadcast or high
resolution applications.
Technical Specifications:
INPUTS: 3 component video (RGBS), 1Vpp/75 Ω on BNC type connectors.
DB-9 connector for RS-232 control.
OUTPUTS: 1 component video (RGBS), 1Vpp/75 Ω on BNC type connectors.
BANDWIDTH: Exceeding 550 MHz.
CROSSTALK: -50 dB at 10MHz.
COUPLING: Direct.
CONTROL: 3-illuminated front panel touch switches, RS-232 from PC.
SWITCH TIME: 3 msec. typical.
DIMENSIONS: 19 inch (W), 7 inch (D), 1U (H) rack mountable.
POWER SOURCE: 230 VAC, 50/60 Hz (115VAC U.S.A.) 5.8 VA.
WEIGHT: 2.5 Kg. (5.5 Lbs.) Approx.
ACCESSORIES: Power cord, Windows 95/98 control software, Null modem adapter.
Typical Applications:
# Component video switching in studio and post production applications.
# High resolution computer-video signal routing.
# Medical applications: routing high line rate signals generated by medical equipment requiring
the widest bandwidth.
# Routing SDI or other very high frequency signals.
Page 2.10
GROUP 2
3x1 RGBHV / Component Video Switcher VS-2053
The Kramer VS-2053 is a high performance 3x1 switcher designed for component video signals
such as RGBHV using BNC connectors. One of three RGBHV sources can be routed to one monitor,
projector, or other receiving device. Two switching modes are provided for different applications.
The vertical interval mode is designed for broadcast and production applications requiring glitch-free
transitions between genlocked sources, and the delayed switching mode is designed to provide cleaner
transitions when switching high resolution computer-video signals.
The VS-2053 can be controlled by front panel buttons or by RS-232 from a touch screen
system, personal computer, or other dedicated controllers. For systems requiring control via the serial
port of a Windows™ based personal computer, Kramer’s new K-Switch software is included at no
additional cost. Video bandwidth exceeding 400 MHz ensures that the VS-2053 remains transparent
even in critical broadcast or computer graphics applications.
Technical Specifications:
INPUTS: 3x5 component video (R, G, B, Hs, Vs), 1V/0.7Vpp/75 Ω or TTL levels (SYNC) on
BNCs.
OUTPUTS: 1 component video (R, G, B, Hs, Vs), 1V/0.7Vpp/75 Ω or TTL levels (SYNC) on
BNCs.
BANDWIDTH: Exceeding 400 MHz.
DIFF. GAIN: 0.1% (typical).
DIFF. PHASE: 0.07 Deg.
K-FACTOR: <0.03%.
COUPLING: DC.
SWITCH SYSTEM: Vertical Interval or delayed (0.1 to 9 Sec.).
CONTROL: Manual or RS-232.
VIDEO S/N RATIO: 73 dB.
DIMENSIONS: 19 inch (W), 7 inch (D), 1U (H) rack mountable.
POWER SOURCE: 230 VAC, 50/60 Hz (115VAC U.S.A.) 8.3 VA.
WEIGHT: 2.8 Kg. (6.2 Lbs.) Approx.
ACCESSORIES: Power cord, Windows 95/98 control software, Null modem adapter.
Typical Applications:
# Any presentation or display system requiring 3x1 switching for RGBHV.
# Live studio routing and component switching for post-production applications.
# Multi-channel component switching by simultaneous operation of several VS-2053 units using
RS-232.
Page 2.11
GROUP 2
4x2 Component Video Matrix VS-2042
The Kramer VS-2042 is a 4x2 matrix switcher designed for component video signals such as
Y/R-y/B-y and RGsB. Since switching is performed during the vertical interval, transitions are glitch-
free when sources share a common reference sync. It is a true matrix allowing any of the four inputs
to be routed to either or both outputs simultaneously.
The VS-2042 can be controlled by front panel buttons or by RS-232 from a touch screen control
system, personal computer, or other serial controllers. For systems requiring control via the serial port
of a Windows™ based personal computer, Kramer’s new K-Switch software is included at no
additional cost. Designed for broadcast applications, the VS-2042 signal bandwidth exceeds 75 MHz.
Inputs and outputs are DC coupled for the highest signal quality.
Technical Specifications:
INPUTS: 4 Component Video (Y, R-Y, B-Y), 1V/0.7Vpp/75 Ω on BNCs.
OUTPUTS: 2 Component Video (Y, R-Y, B-Y), 1V/0.7Vpp/75 Ω on BNCs.
BANDWIDTH: Exceeding 75 MHz.
DIFF. GAIN: 0.15%.
DIFF. PHASE: 0.25 Deg.
K-FACTOR: 0.3%.
CROSSTALK: -50 dB at 10MHz.
COUPLING: DC.
SWITCH SYSTEM: Vertical interval.
CONTROL: Manual or RS-232.
VIDEO S/N RATIO: 74 dB.
DIMENSIONS: 19 inch (W), 7 inch (D), 1U (H) rack mountable.
POWER SOURCE: 230 VAC, 50/60 Hz (115VAC U.S.A.) 11.5 VA.
WEIGHT: 2.9 Kg. (6.4 Lbs.) Approx.
ACCESSORIES: Power cord, Windows 95/98 control software, Null modem adapter.
Typical Applications:
# Component routing in live broadcast and post production applications.
# Computer graphics and medical applications.
# Multi-channel component switching by simultaneous operation of several VS-2042 units using
RS-232.
Page 2.12
GROUP 2
xl 401/xl1201-VSVertical Interval Switchers
The Kramer VS-1201xl, VS-1001xl, VS-801xl, VS-601xl and VS-401xl are a family of high
performance vertical interval switchers for composite video and stereo audio signals. One of 12
sources can be routed to one monitor, VCR, or other receiving device. Since switching is performed
during the vertical interval, transitions are glitch-free when sources share a common reference sync.
There are a total of four ways to control the VS-1201xl family: front panel buttons, RS-232, RS-
485, and contact closure. They are also designed to be combined for easily expansion for larger
switching systems. For example, two VS-1201xl’s can be combined to form a 24x1, etc. Multiple
units can also be operated in parallel for switching component signal formats. For example, two VS-
1201xl’s could be linked to form a 12x1 switch for Y/C, three could be linked to switch YUV, etc.
The VS-1201xl family is dependable, rugged, and each fits in one vertical space of a standard
19” rack. Video bandwidth of 250MHz ensures that they remain transparent even in the most critical
production, presentation, or broadcast applications.
Technical Specifications:
INPUTS: 12, 10, 8, 6, 4 composite / single component Video, 1Vpp/75 Ω , on BNCs
12, 10, 8, 6, 4 stereo audio, +4dBm, 10kΩ, on RCA connectors.
1 external sync input (or composite video) 1Vpp/75 Ω , on a BNC connector
RS-232 on 9pin D-sub, RS-485 on terminal block, contact closure on 15pin D.
OUTPUTS: 1 composite / single component video, 1Vpp/75 Ω on a BNC.
1 stereo audio up to +28Vpp /50 Ω, (24dBm) on RCAs.
BANDWIDTH (VIDEO): 250 MHz -3dB (typical). BANDWIDTH (AUDIO): 55 kHz, -0.1dB.
NON LINEARITY: Less than 0.1%. AUDIO THD+NOISE: 0.02%.
DIFF. PHASE: 0.03 Deg. 2nd HARMONIC: <0.003% (1kHz).
DIFF. GAIN: 0.04%. AUDIO CROSSTALK: -79 dB.
VIDEO S/N: >77 dB. AUDIO S/N RATIO: > 90 dB, Unweighted.
K-FACTOR: <0.05%.
CONTROLS: 12 illuminated front-panel touch switches, RS-232, RS-422, contact closure.
DIMENSIONS: 19 inch (W), 7 inch (D) 1U (H) rack mountable.
POWER SOURCE: 230 VAC, 50/60 Hz, (115VAC U.S.A.) 16 VA (VS-1211).
WEIGHT: 3.1 Kg (6.88 Lbs.) Approx.
ACCESSORIES: Power cord, Windows 95/98 control software, Null modem adapter.
Typical applications:
# Video production studios.
# Live broadcast, for switching between cameras in real-time.
# CCTV and home theater systems.
Page 2.13
GROUP 2
/411 1211-VS Vertical Interval Switchers
The Kramer VS-1211, VS-1011, VS-811, VS-611, and VS-411 are a family of high
performance vertical interval switchers for composite video and balanced stereo audio signals. One of
12 sources can be routed to one monitor, VCR, or other receiving device. Since switching is
performed during the vertical interval, transitions are glitch-free when sources share a common
reference sync.
There are a total of four ways to control the VS-1211 family: front-panel buttons, RS-232, RS-
485, and contact closure. They are also designed to be easily expandable for larger switching systems.
For example, two VS-1211’s can be combined to form a 24x1, etc. Multiple units can also be
operated in parallel for switching component signal formats. For example, two VS-1211’s could be
linked to form a 12x1 switch for Y/C, three could be linked to switch YUV, etc.
The VS-1211 family is dependable, rugged, and each fits in one vertical space of a standard 19”
rack. Video bandwidth of at least 250MHz ensures that they remain transparent even in the most
critical production, presentation, or broadcast applications.
Technical Specifications:
INPUTS: 12, 10, 8, 6, 4 Composite / single component Video, 1Vpp/75 Ω , on BNCs.
12, 10, 8, 6, 4 Audio- balanced stereo, +4dBm, 10kΩ, on 2-part, snap fit terminal blocks.
1 external sync input (or composite video) 1Vpp/75 Ω , on a BNC connector.
RS-232 DB-9 control socket, RS-485 terminal block, DB-15 for remote connector.
OUTPUTS: 1 Composite / single component Video, 1Vpp/75 Ω on a BNC.
1 Audio- balanced stereo up to +28Vpp /50 Ω, (24dBm) on terminal blocks.
BANDWIDTH (VIDEO): 250 MHz -3dB (typical). BANDWIDTH (AUDIO): 55 kHz, -0.1dB.
NON LINEARITY: Less than 0.1%. AUDIO THD+NOISE: 0.013%.
DIFF. PHASE: 0.03 Deg. 2nd HARMONIC: <0.003% (1kHz).
DIFF. GAIN: 0.04% AUDIO CROSSTALK: -79 dB.
LUMA S/N: >77 dB. AUDIO S/N RATIO: > 95 dB, Unweighted.
K-FACTOR: <0.05%.
CONTROLS: 12 illuminated front-panel touch switches, RS-232, RS-485, contact closure.
DIMENSIONS: 19-inch (W), 7-inch (D) 1U (H) rack mountable.
POWER SOURCE: 230 VAC, 50/60 Hz, (115VAC U.S.A.) 16 VA (VS-1211).
WEIGHT: 3.1 Kg (6.88 Lbs.) Approx.
ACCESSORIES: Power cord, Windows 95/98 control software, Null modem adapter.
Typical applications:
# Video production studios and professional presentation systems.
# Live broadcast, for switching between cameras in real-time.
# CCTV and security applications.
Page 2.14
GROUP 2
/1202402-VSl Switchers Vertical Interva
The Kramer VS-1202, VS-802, VS-602 and VS-402 are a family of high performance two output,
vertical interval matrix switchers for composite video and stereo audio signals. Two of 12 inputs can be
routed to either or both outputs simultaneously. Since switching is performed during the vertical interval,
glitch-free transitions are provided when sources share a common reference sync.
The design features two independent sets of input select buttons, one set for each output, making it
ideal for real-time applications requiring the ability to preview any input before committing it to a main
output. The “02” family is also great for any application requiring a true two-output matrix. They are
designed to be easily expandable for larger switching requirements. For example, two VS-1202’s can be
combined to form a 12x4 system, etc. All four versions of the 02 switchers can be ordered with or without
RS-232 control capability.
The VS-1202 family is dependable, rugged, and each fits in two vertical spaces of a standard 19”
rack. Video bandwidth of 40MHz ensures that the unit remains transparent in almost any typical video
application.
Technical Specifications:
INPUTS: 4, (6), (8), (12) composite video, looping, 1Vpp, 75 Ω on BNCs.
4, (6), (8), (12) stereo audio, looping, 1V Nom., 10kΩ on RCAs.
OUTPUTS: 2 composite video, 1Vpp, 75 Ω on BNCs.
2 stereo audio, 1 V Nom., 100 Ω on RCAs.
VIDEO BANDWIDTH: 40 MHz - 3 dB. AUDIO BANDWIDTH: 20 kHz at - 3 dB.
VIDEO S/N RATIO: Better than 75dB. AUDIO S/N RATIO: 82 dB.
DIFF. GAIN: 1.1%. AUDIO THD: 0.02 %.
DIFF. PHASE: 0.65 Deg.
VIDEO CROSSTALK: -65 dB (Sync), -40dB (C).
K-FACTOR: <0.05%.
CONTROLS: (8), (12), (16), (24) Illuminated touch switches or optional RS-232 control.
DIMENSIONS: 19-inch (W), 7-inch (D) 2U (H) rack mountable.
POWER SOURCE: 230VAC, 50/60 Hz 115 VAC (U.S.A.) 10.3 VA.
WEIGHT: 3.9 Kg. (8.6 Lbs.) Approx.
ACCESSORIES: Power cord, Windows 95/98 control software, Null modem adapter.
Typical applications:
# Video production studios.
# Live broadcast or presentation applications such as switching between cameras in real-time.
# CCTV, home theater, and rental/staging applications.
Page 2.15
GROUP 2
YC6- VSxVideo & Audio Matri-s/CV4 x4
The Kramer VS-6YC is a high quality 4x4 matrix switch for composite and/or s-Video and
stereo audio signals. It is a true matrix, allowing the user to route any input to any or all outputs
simultaneously.
The VS-6YC provides composite video and s-Video connectors allowing it to be used for either
format. Mixing formats is possible but composite video sources would typically need to be routed to
composite video outputs and, likewise, s-Video sources must be routed to s-Video outputs. It is very
important to note that the VS-6YC does not perform any signal format conversion.
For intuitive user control, the front panel offers a dedicated rotary input select knob for each of
the four outputs. The VS-6YC is easy to use, dependable, rugged, and fits in one vertical space of a
standard 19” rack.
Technical Specifications:
INPUTS: 4 Video, 1Vpp / 75 Ω Composite (BNC), 1Vpp/75Ω (Y), 0.3Vpp / 75Ω (C) on 4P connectors.
4 Audio stereo 1Vpp / 10kΩ on RCAs.
OUTPUTS: 4 Video, 1Vpp / 75 Ω Composite (BNC), 1Vpp/75Ω (Y), 0.3Vpp / 75Ω (C) on 4P connectors.
4 Audio stereo 1Vpp / 100Ω on RCAs.
VIDEO BANDWIDTH: 37 MHz.
AUDIO BANDWIDTH: 22 kHz.
DIFF. PHASE: 0.53 Deg.
MAX. VIDEO OUTPUT: 2Vpp/75Ω.
VIDEO S/N RATIO: 72 dB.
AUDIO S/N RATIO: > 78 dB.
AUDIO THD: < 0.1%.
VIDEO CROSSTALK: -65dB (SYNC), -42dB (C).
CONTROL: 4 rotary control knobs.
DIMENSIONS: 19 inch (W), 7 inch (D), 1U (H) rack mountable.
POWER SOURCE: 230 VAC, 50/60 Hz (115VAC U.S.A.) 12 VA.
WEIGHT: 2.8 Kg. (6.2 Lbs.) Approx.
ACCESSORIES: Power cord.
Typical Applications:
# Small video and audio editing systems.
# Any professional system requiring outstanding value in a true 4x4 matrix.
# Retail stores, restaurants and sports bars, home theaters.
Page 2.16
GROUP 2
YC4x4-VS
Interval Matrix Video Vertical -s/CV
1
The Kramer VS-4x4YC is a high performance 4x4 vertical interval matrix switch for composite
and/or s-Video and stereo audio signals. It is a true matrix, allowing the user to route any input to any
or all outputs simultaneously. Since the VS-4x4YC switches during the vertical interval, transitions
are glitch-free when sources share a common reference sync.
The VS-4x4YC provides composite video and s-Video connectors allowing it to be used for
either format. Mixing formats is possible but composite video sources would typically need to be
routed to composite video outputs and, likewise, s-Video sources must be routed to s-Video outputs.
It is very important to note that the VS-4x4YC does not perform any signal format conversion.
Like most Kramer switchers, the VS-4x4YC can be controlled by front panel buttons or RS-232
serial commands. For applications requiring remote control via a Windows-based personal computer,
K-Switch software is provided at no additional cost. It is easy to use, dependable, rugged, and fits in
one vertical space of a standard 19” rack.
Technical Specifications:
INPUTS: 4 video, 1Vpp/75 Ω Composite on BNCs, 4 Y/C - Y=1Vpp/75 Ω, C=0.3Vpp/75Ω.
4 stereo audio1Vpp/ 50kΩ on RCAs.
OUTPUTS: 4 video, 1Vpp/75 Ω composite on BNCs, 4 Y/C - Y=1Vpp/75 Ω, C=0.3Vpp/75Ω.
4 stereo audio 1Vpp/100Ω on RCAs.
VIDEO BANDWIDTH 50 MHz -3dB.
DIFF. GAIN: 0.15 %.
DIFF. PHASE: 0.1 Deg.
AUDIO BANDWIDTH: 10-100,000 Hz.
VIDEO S/N RATIO: > 65 dB.
AUDIO S/N RATIO: > 75 dB.
AUDIO THD: <0.1%.
VIDEO CROSSTALK: 47dB Luma.
AUDIO CROSSTALK: 53 dB.
DIMENSIONS: 19 inch (W), 7 inch (D), 1U (H) rack mountable.
POWER SOURCE: 230 VAC (115VAC U.S.A.) 10.3VA.
WEIGHT: 2.9 Kg. (6.4 Lbs.) Approx.
ACCESSORIES: Power cord, Windows 95/98 control software, Null modem adapter.
Typical Applications:
# Small video and audio editing systems.
# Any professional display system requiring outstanding value in a true 4x4 matrix.
# Non-linear editing systems.
Page 2.17
GROUP 2
4x5-VS V Matrix/al AVertical Interv4 x5
The Kramer VS-5x4 is a high performance 5x4 vertical interval matrix switch for composite
video and stereo audio signals. It is a true matrix, allowing the user to route any input to any or all
outputs simultaneously. Since the VS-5x4 switches during the vertical interval, transitions are glitch-
free when sources share a common reference sync. Audio signals are always switched together with
the corresponding video signal, and the large LED display makes it easy to see the current settings.
Each audio output may be configured to have 0, 2, 4 or 6dB gain by using the front panel switches.
Like most Kramer switchers, the VS-5x4 can be controlled by front panel buttons or RS-232
serial commands. For applications requiring remote control via a Windows-based personal computer,
Kramer’s new K-Switch software is provided at no additional cost. It is easy to use, dependable,
rugged, and fits in one vertical space of a standard 19” rack.
Technical Specifications:
INPUTS: 5 video, 1Vpp/75Ω Composite on BNCs.
5 stereo audio 1Vpp/ 50kΩ on RCAs.
DB-9 connector for RS-232 control.
OUTPUTS: 4 video, 1Vpp/75Ω Composite on BNCs.
4 stereo audio 1Vpp/100Ω on RCAs.
VIDEO BANDWIDTH: Exceeding 30 MHz.
AUDIO BANDWIDTH: 20-20000 Hz, -1dB.
DIFF. GAIN: 0.13%.
DIFF. PHASE: 0.8 Deg.
K-FACTOR: <0.05%.
VIDEO S/N RATIO: 74 dB.
AUDIO S/N RATIO: 89 dB.
AUDIO THD: 0.02%.
VIDEO CROSSTALK: -47dB Luma.
AUDIO CROSSTALK: -53 dB.
DIMENSIONS: 19 inch (W), 7 inch (D), 1U (H) rack mountable.
POWER SOURCE: 230 VAC, 50/60Hz (115VAC U.S.A.) 6 VA.
WEIGHT: 2.7 Kg. (6 Lbs.) Approx.
ACCESSORIES: Power cord, Windows 95/98 control software, Null modem adapter.
Typical Applications:
# Small video and audio editing systems.
# Any professional display system requiring outstanding value in a true 5x4 matrix.
# Non-linear editing systems.
Page 2.18
GROUP 2
xl606-VS V Matrix/Vertical Interval A6 x6
The Kramer VS-606xl is a high performance, 6x6 vertical interval matrix switcher for composite
video and stereo audio signals. It is a true matrix, allowing the user to route any input to any or all
outputs simultaneously. Since the VS-606xl switches during the vertical interval, transitions are
glitch-free when sources share a common reference sync.
There are many updated features on this popular design including audio breakaway, which
provides the ability to switch audio independently from video. Six preset memory locations are
provided for quick access to common configurations. Also, the TAKE button allows the user to place
multiple switches in a queue, then activate them with one touch of this button or a single serial
command. Kramer’s new K-Switch control software is included for applications where a Windows ™
based PC is used to control the VS-606xl.
There are a total of three ways to control the VS-606xl: front-panel buttons, RS-232, and RS-
485. It is dependable, rugged, and fits in two vertical spaces of a standard 19” rack. Video bandwidth
of 200MHz ensures that the VS-606xl remains transparent even in the most critical applications.
Technical Specifications:
INPUTS: 6 composite video, 1Vpp/75Ω on BNCs. 1 sync/video genlock 1Vpp/75Ω with sync select
switch. 6 stereo audio, + 4dBm/62KΩ on RCAs.
OUTPUTS: 6 composite video, 1Vpp/75Ω on BNCs. 6 stereo audio, +4dBm/50Ω (27 Vpp max.) on RCAs.
VIDEO BANDWIDTH: Exceeding 200 MHz. AUDIO BANDWIDTH: Exceeding 100 kHz.
VIDEO CROSSTALK: <50dB @ 5MHz. NON LINEARITY: <0.1%.
VIDEO S/N: 74 dB. AUDIO S/N: 88 dB Unweighted, (1Vpp).
CONTROL: Manual, RS-232 or RS-485. DIFF. GAIN: 0.05%.
AUDIO THD: 0.016% (1V, 1KHz). DIFF. PHASE: 0.03 Deg.
SWITCHING: Vertical Interval. K-FACTOR: <0.05%.
DIMENSIONS: 19-inch (W), 7-inch (D) 2U (H) rack mountable.
POWER SOURCE: 230 VAC, 50/60 Hz, (115VAC, U.S.A.) 11VA.
WEIGHT: 3.4 Kg (7.5 Lbs.) Approx.
ACCESSORIES: Power cord, Windows 95/98 control software, Null modem adapter.
Typical Applications:
# Any professional system requiring outstanding value in a 6x6 matrix.
# Production and duplications facilities, rental and staging.
# Security, CCTV, and home theater systems.
Page 2.19
GROUP 2
646- VSSwitcher
Matrix
V/Balanced A
6x6
The Kramer VS-646 is a high performance, 6x6 vertical interval matrix switcher for composite video and
balanced stereo audio signals. It is a true matrix, allowing the user to route any input to any or all outputs
simultaneously. Since the VS-646 switches during the vertical interval, transitions are glitch-free when sources
share a common reference sync.
There are many updated features on this popular design including audio breakaway, which provides the
ability to switch audio independently from video. Six preset memory locations are provided for quick access to
common configurations. Also, the TAKE button allows the user to place multiple switches in a queue, then
activate them with one touch of this button or a single serial command. Kramer’s new K-Switch control
software is included for applications where a Windows ™ based PC is used to control the VS-646.
There are a total of three ways to control the VS-646; front-panel buttons, RS-232, and RS-485. It is
dependable, rugged, and fits in two vertical spaces of a standard 19” rack. Video bandwidth of 200MHz ensures
that the VS-646 remains transparent even in the most critical applications.
Technical Specifications:
INPUTS: 6 composite video, 1Vpp/75Ω on BNCs. 1 Sync/Video Genlock 1Vpp/75Ω with sync select switch
6 balanced stereo audio, + 4dBm/33 kΩ on detachable terminal blocks
OUTPUTS: 6 composite video, 1Vpp/75Ω on BNCs
6 balanced stereo audio, +4dBm/50Ω (24 Vpp max.) on detachable terminal blocks
VIDEO BANDWIDTH: Exceeding 200 MHz. AUDIO BANDWIDTH: Exceeding 100 kHz
VIDEO CROSSTALK: <50dB @ 5MHz. AUDIO S/N: 84 dB Unweighted, (1Vpp)
VIDEO S/N: 74 dB. AUDIO THD: 0.025% (1V, 1kHz)
NON LINEARITY: <0.1% 2nd HARMONIC: 0.013%
DIFF. GAIN: 0.05% MAXIMAL AUDIO: 24 Vpp (>20dBm)
DIFF. PHASE: 0.03 Deg
K-FACTOR: <0.05%.
CONTROL: Manual, RS-232 or RS-485
SWITCHING: Vertical Interval
DIMENSIONS: 19 inch (W), 7 inch (D) 2U (H) rack mountable
POWER SOURCE: 230 VAC, 50/60 Hz, (115VAC, U.S.A.), 14 VA.
WEIGHT: 3.4 Kg (7.5 Lbs.) Approx
ACCESSORIES: Power cord, Windows 95/98 control software, Null modem adapter.
Typical Applications:
# Any professional system requiring outstanding value in a 6x6 matrix
# Production and duplications facilities, rental and staging
# Security, CCTV, and home theater systems
Page 2.20
GROUP 2
8x1 Vertical Interval Y/C Switcher VS-2081S
The Kramer VS-2081S is a high performance 8x1 vertical interval switcher for s-Video (Y/C)
signals using 4 pin connectors. One of up to eight s-Video inputs can be routed to a single output.
Although it is technically an 8x1 unit, two identical outputs are provided to simultaneously drive two
monitors, projectors, or other receiving devices. Since switching is performed during the vertical
interval, glitch-free transitions are provided when sources share a common reference sync.
The VS-2081S is designed to be easily expandable to create larger switching systems. For
example, two units could be combined to form a 16x1, etc. Multiple VS-2081S’s operated in parallel
can also be looped through to become 8x2, 8x3 etc.
The VS-2081S can be controlled by front panel buttons or by RS-232 serial commands. For
systems requiring control via a Windows™ based personal computer, Kramer's new K-Switch software
is included at no additional cost.
Technical Specifications:
INPUTS: 8 s-Video, 1Vpp/75 Ω (Y), 0.3Vpp/75Ω (C) on 4P connectors with termination switches for
looping.
OUTPUTS: 2 s-Video, 1Vpp/75 Ω (Y), 0.3Vpp/75Ω (C) on 4P connectors.
1 DB-9 connector for control when cascading, 1 DB-9 connector for RS-232.
BANDWIDTH: Exceeding 60 MHz (Y -3dB).
VIDEO CROSSTALK: -50dB (Chroma).
DIFF. GAIN: 0.06%.
DIFF. PHASE: 0.12 Deg.
K-FACTOR: <0.05%.
LUMA S/N: 75 dB.
OUTPUT COUPLING: DC for Y, AC for C.
CONTROL: 8 illuminated front-panel touch switches, RS-232.
DIMENSIONS: 19 inch (W), 7 inch (D), 1U (H) rack mountable.
POWER SOURCE: 230 VAC, 50/60 Hz, (115VAC U.S.A.) 8.3 VA.
WEIGHT: 2.6 Kg. (5.8 Lbs.) Approx.
ACCESSORIES: Power cord, Windows 95/98 control software, Null modem adapter.
OPTIONS: Kramer model VS-2481 companion balanced audio switcher.
Typical Applications:
# Any professional A/V system requiring high quality s-Video switching.
# Live broadcast applications for switching between cameras in real-time.
# CCTV and security applications.
Page 2.21
GROUP 2
8x1 Balanced Audio Switcher VS-2481
The Kramer VS-2481 is a high performance 8x1 switcher for balanced audio signals using XLR
connectors. One of up to eight balanced audio signals can be routed to the output. Although it is
technically an 8x1 unit, two identical outputs are provided. Excellent audio performance makes it
ideal for critical applications, and a rear-panel control is provided for setting optimum output levels.
The VS-2481 is designed to operate independently or as a companion to the Kramer s-Video switcher
model VS-2081S.
Switching is microprocessor-based, and may be controlled by front-panel buttons or by RS-232.
Software is included for applications requiring control via a Windows™ based personal computer. The
VS-2481 is designed to be easily expandable to create larger systems. For example, two units could be
combined to form a 16x1, etc. Also, multiple VS-2481’s linked for parallel operation can form a
multi-channel 8x1 system. Looping, and parallel control can create matrices such as 8x2, 8x3, etc.
Technical Specifications:
INPUTS: 8 balanced audio, +4dBm nom. acceptor dependent input impedance, on female XLR
connectors.
OUTPUTS: 2 balanced audio, +4dBm, one fixed and one with level control on male XLR connectors.
1 DB-9 connector for control when cascading, 1 DB-9 connector for RS-232.
BANDWIDTH: Exceeding 50 kHz (-3dB).
THD: Controllable output - Less than 0.04%, @ 1kHz, second output- source dependent.
S/N: >91 dB.
CROSSTALK: Better than -50dB.
SWITCH RESPONSE: Less than 3mS (when manually controlled).
CONTROL: 8 illuminated front-panel touch switches, RS-232.
DIMENSIONS: 19 inch (W), 7 inch (D), 1U (H) rack mountable.
POWER SOURCE: 230 VAC, 50/60 Hz, (115VAC U.S.A.) 4.1 VA.
WEIGHT: 2.6 Kg. (2.8 Lbs.) Approx.
ACCESSORIES: Power cord, Windows 95/98 control software, Null modem adapter.
OPTIONS: Kramer model VS-2081S companion switcher for s-Video.
Typical Applications:
# Any professional A/V system requiring XLR audio switching.
# Live broadcasting, for switching between sources in real-time.
# Audio recording studios.
Page 2.22
GROUP 2
xl808- VSV Matrix Switcher/A8 x8
The Kramer VS-808xl is a high performance, 8x8 vertical interval matrix switcher for composite
video and stereo audio signals. It is a true matrix, allowing the user to route any input to any or all
outputs simultaneously. Since the VS-808xl switches during the vertical interval, transitions are
glitch-free when sources share a common reference sync.
There are many updated features on this popular design including audio breakaway, which
provides the ability to switch audio independently from video. Eight preset memory locations are
provided for quick access to common configurations. Also, the TAKE button allows the user to place
multiple switches in a queue, then activate them with one touch of this button or a single serial
command. Kramer’s new K-Switch control software is included for applications where a Windows ™
based PC is used to control the VS-808xl.
There are a total of three ways to control the VS-808xl; front-panel buttons, RS-232, and RS-
485. It is dependable, rugged, and fits in two vertical spaces of a standard 19” rack. Video bandwidth
of 200MHz ensures that the VS-808xl remains transparent even in the most critical applications.
Technical Specifications:
INPUTS: 8 Composite Video, 1Vpp/75Ω on BNCs. 1 Sync/Video Genlock 1Vpp/75Ω with sync select
switch. 8 Audio Stereo, + 4dBm/33 KΩ on RCAs.
OUTPUTS: 8 Composite Video, 1Vpp/75Ω on BNCs. 8 Audio Stereo, +4dBm/50Ω (24 Vpp max.) on RCAs.
VIDEO BANDWIDTH: Exceeding 200 MHz. AUDIO BANDWIDTH: Exceeding 100 kHz.
VIDEO CROSSTALK: <50dB @ 5MHz. NON LINEARITY: <0.1%.
VIDEO S/N: 74 dB. AUDIO S/N: 88 dB Unweighted, (1Vpp).
CONTROL: Manual, RS-232 or RS-485. DIFF. GAIN: 0.05%.
AUDIO THD: 0.016% (1V, 1kHz). DIFF. PHASE: 0.03 Deg.
SWITCHING: Vertical Interval. K-FACTOR: <0.05%.
DIMENSIONS: 19 inch (W), 7 inch (D) 2U (H) rack mountable.
POWER SOURCE: 230 VAC, 50/60 Hz, (115VAC, U.S.A.) , 11 VA.
WEIGHT: 3.5 Kg (7.8 Lbs.) Approx.
ACCESSORIES: Power cord, Windows 95/98 control software, Null modem adapter.
Typical applications:
# Production studios.
# Audio / Video duplication facilities.
# Professional presentation systems.
Page 2.23
GROUP 2
848-VS Switcher
Matrix
V/Balanced A
8x8
The Kramer VS-848 is a high performance, 8x8 vertical interval matrix switcher for composite video and
balanced stereo audio signals. It is a true matrix, allowing the user to route any input to any or all outputs
simultaneously. Since the VS-848 switches during the vertical interval, transitions are glitch-free when sources
share a common reference sync.
There are many updated features on this popular design including audio breakaway, which provides the
ability to switch audio independently from video. Eight preset memory locations are provided for quick access
to common configurations. Also, the TAKE button allows the user to place multiple switches in a queue, then
activate them with one touch of this button or a single serial command. Kramer’s new K-Switch control
software is included for applications where a Windows ™ based PC is used to control the VS-848.
There are a total of three ways to control the VS-848; front-panel buttons, RS-232, and RS-485. It is
dependable, rugged, and fits in two vertical spaces of a standard 19” rack. Video bandwidth of 200MHz ensures
that the VS-848 remains transparent even in the most critical applications.
Technical Specifications:
INPUTS: 8 composite video, 1Vpp/75Ω on BNCs. 1 Sync/Video Genlock 1Vpp/75Ω with sync select switch.
8 balanced stereo audio, + 4dBm/33 kΩ on detachable terminal blocks.
OUTPUTS: 8 composite video, 1Vpp/75Ω on BNCs.
8 balanced stereo audio, +4dBm/50Ω (24 Vpp max.) on detachable terminal blocks.
VIDEO BANDWIDTH: Exceeding 200 MHz. AUDIO BANDWIDTH: Exceeding 100 kHz.
VIDEO CROSSTALK: <50dB @ 5MHz. AUDIO S/N: 84 dB Unweighted, (1Vpp)
VIDEO S/N: 74 dB. AUDIO THD: 0.025% (1V, 1KHz).
NON LINEARITY: <0.1%. 2nd HARMONIC: 0.013%.
DIFF. GAIN: 0.05% . MAXIMAL AUDIO: 24 Vpp (>20dBm).
DIFF. PHASE: 0.03 Deg.
K-FACTOR: <0.05%.
CONTROL: Manual, RS-232 or RS-485.
SWITCHING: Vertical Interval.
DIMENSIONS: 19 inch (W), 7 inch (D) 2U (H) rack mountable.
POWER SOURCE: 230 VAC, 50/60 Hz, (115VAC, U.S.A.), 14 VA.
WEIGHT: 3.5 Kg (7.8 Lbs.) Approx.
ACCESSORIES: Power cord, Windows 95/98 control software, Null modem adapter.
Typical applications:
# Any professional system requiring outstanding value in a 8x8 matrix.
# Production and duplications facilities, rental and staging. Security, CCTV, and home theater systems.
# Production studio vertical interval routing between Genlocked sources.
Page 2.24
GROUP 2
12x2 Vertical Interval Matrix VS-1202YC
The Kramer VS-1202YC is a high performance 12x2 vertical interval matrix switcher for s-Video
(Y/C) or composite video, and stereo audio signals. Two up to 12 inputs can be routed to either or both
outputs simultaneously. Since switching is performed during the vertical interval, transitions are glitch-free
when sources share a common reference sync.
The design features two independent sets of input select buttons, one set for each output, making it
ideal for real-time applications requiring the ability to preview any input before committing it to a main
output. Kramer’s “02” family is also great for any application requiring a true two-output matrix. RS-232
control capability is standard on the VS-1202YC, and Windows control software is also provided at no
additional cost.
The VS-1202YC is dependable, rugged, and fits in two vertical spaces of a standard 19” rack. Video
bandwidth of 37MHz ensures transparent performance in almost any typical video application.
Technical Specifications:
INPUTS: 12 composite video 1Vpp/75 Ω on BNC type connectors. 12 YC, Y=1Vpp/75Ω,
C=0.3Vpp/75
Ω, on 4P connectors.
12 stereo audio 10K Ω on RCAs.
OUTPUTS: 2x2 composite video, 1Vpp/75 Ω, 2x2 YC, Y=1Vpp/75Ω, C=0.3Vpp/75 Ω.
2x2 stereo audio 1V/100
Ω on RCAs.
VIDEO BANDWIDTH: 37 MHz -3dB. CROSSTALK: -40 dB at 5MHz.
OUTPUT COUPLING: DC, clamped.
DIFF. GAIN: 0.4%.
DIFF. PHASE: 0.9 Deg. AUDIO THD: 0.02%.
VIDEO S/N RATIO: 74 dB. AUDIO S/N RATIO: 80 dB.
K-FACTOR: <0.05%. SWITCHING: Vertical Interval.
CONTROL: 24 illuminated front-panel touch switches, RS-232.
DIMENSIONS: 19-inch (W), 7-inch (D) 2U (H) rack mountable.
POWER SOURCE: 230 VAC, 50/60 Hz (117VAC U.S.A.) 11.5 VA.
WEIGHT: 3.7 Kg (8.2 Lbs.) Approx.
ACCESSORIES: Power cord, Windows 95/98 control software, Null modem adapter.
Typical applications:
# Video production studios.
# Live broadcast or presentation applications such as switching between cameras in real-time.
# CCTV, home theater, and rental/staging applications.
Page 2.25
GROUP 2
16x1 Vertical Interval Switcher VS-2016
The Kramer VS-2016 is a high performance 16x1 vertical interval switcher for composite video
signals using BNC connectors. One up to 16 sources can be routed to one monitor, VCR, or other
receiving device. Since switching is performed during the vertical interval, transitions are glitch-free
when sources share a common reference sync.
The VS-2016 is designed to be easily expandable to create larger switching systems. For
example, two VS-2016’s can be combined to make a 32x1, etc. Multiple units can also be operated in
parallel for switching component signal formats. For example, two VS-2016’s could be linked to form
a 16x1 switch for Y/C, three could be linked to switch YUV, etc. It is RS-232 controllable, and
comes with Kramer’s new K-Switch Windows compatible control software at no additional cost.
The VS-2016 is dependable, rugged, and fits in one vertical space of a standard 19” rack. Video
bandwidth of at least 80 MHz ensures that it remains transparent in almost any video application.
Technical Specifications:
INPUTS: 16 composite / component video, 1Vpp/75 Ω, on BNC connectors.
OUTPUTS: 1 composite / component video, 1Vpp/75 Ω on a BNC connector.
BANDWIDTH (VIDEO): Exceeding 80 MHz (-3dB).
DIFF. GAIN: 0.07%.
LUMA S/N: 74 dB.
DIFF. PHASE: 0.28 Deg.
K-FACTOR: <0.05%.
OUTPUT COUPLING: DC.
CROSSTALK: -48dB (Chroma).
CONTROL: 16 front-panel touch switches, RS-232.
SWITCHING: During Vertical Interval.
DIMENSIONS: 19 inch (W), 7 inch (D), 1U (H) rack mountable.
POWER SOURCE: 230 VAC 50/60 Hz (115VAC U.S.A.) 8.7 VA.
WEIGHT: 2.8 Kg. (6.2 Lbs.) Approx.
ACCESSORIES: Power cord, Windows 95/98 control software, Null modem adapter.
Typical applications:
# Video production studios.
# Live broadcast and presentation systems requiring switching between cameras in real-time.
# CCTV, home theater, and rental/staging applications.
Page 2.26
GROUP 2
16x16 Video Matrix VS-2516
The Kramer VS-2516 is designed primarily as a high performance 16x16 vertical interval matrix switcher
for composite video signals using BNC connectors, but can be configured for other signal formats as described
below. It is a true matrix allowing any input to be routed to any or all outputs simultaneously. Since the VS-
2516 performs switches during the vertical interval, transitions are glitch-free when sources share a common
reference sync. 15 non-volatile preset memory settings are provided for easy recall of common configurations.
In addition to its typical 16x16 operation, the VS-2516 can be configured as an 8x8 for s-Video (YC), 5x5
for YUV, or 4x4 for RGBS signals. It is designed to be easily expandable to create larger switching systems. For
example, two units can combine to form a 16x32 system, etc. Also, multiple VS-2516’s can be operated in
parallel for larger multi-channel systems. For example, two units can be used as a 16x16 for s-Video.
Kramer offers companion units to add audio capability to any system based on the VS-2516. The VS-
2616 is designed for balanced audio signals, and the VS-2216 is the unbalanced version. Both use detachable
screw terminal blocks for audio connections. Control is performed by simple front panel buttons or RS-232
serial commands from touch screen systems, personal computer, or other dedicated serial controllers.
Technical Specifications:
INPUTS: 16 composite video, or 8 s-Video (YC), or 4 RGBS, or 5 YUV, 1Vpp/75Ω.
OUTPUTS: 16 composite video, or 8 s-Video, or 4 RGBS, or 5 YUV, 1Vpp/75 Ω.
VIDEO BANDWIDTH: 69 MHz.
CROSSTALK: Less than 40dB (Chroma).
COUPLING: DC. DIFF. GAIN: Less than 0.07%.
VIDEO S/N: Better than 75 dB. DIFF. PHASE: 0.15 Deg.
SWITCHING: Vertical Interval or immediate. K-FACTOR: 0.1%.
CONTROL: Front panel switches, RS-232.
INTERFACE: RS-232.
STORAGE CAPACITY: 15 presets.
DIMENSIONS: 19 inch (W), 7 inch (D), 2U (H) rack mountable.
POWER SOURCE: 230 VAC, 50/60 Hz (115VAC, U.S.A.) 22VA.
WEIGHT: 4.6Kg. (10.2 Lbs.) Approx.
ACCESSORIES: Power cord, Windows 95/98 control software, Null modem adapter.
OPTIONS: Kramer model VS-2216 or VS-2616 companion audio units.
Typical Applications:
# Any professional display system requiring video signal routing.
# Broadcast and production facilities.
# Rental and staging applications.
Page 2.27
GROUP 2
2216- VSStereo Audio Matrix16 x16
The Kramer VS-2216 is a high performance 16x16 matrix switch for unbalanced stereo audio
signals using detachable screw terminal connectors. It is a true matrix allowing any input to be routed
to any or all outputs simultaneously. The VS-2216 is designed to operate independently, or as a
companion to the Kramer VS-2516 video matrix switch. It offers excellent audio performance, easy
to use front panel, large LED I/O display, and 15 non-volatile user-programmable preset memory
settings.
The VS-2216 can be controlled by front panel buttons, RS-232, or by the link with a Kramer
VS-2516 video matrix switch. For applications requiring control via a personal computer, Kramer’s
Windows™ compatible control software is included at no additional cost. Inputs and outputs can by
looped to form larger systems such as 16x32, 32x48 etc.
Technical Specifications:
INPUTS: 16 stereo audio, looping, 50k ohms input impedance on terminal blocks.
OUTPUTS: 16 stereo audio, 50 ohms impedance on terminal blocks.
AUDIO BANDWIDTH: Exceeding 40 kHz.
CROSSTALK: Less than 70dB (1kHz).
THD: Less than 0.1%.
COUPLING: AC.
MAX. SIGNAL LEVEL: 12Vpp.
AUDIO S/N: Better than 85 dB (+4dBm).
CONTROL: Microprocessor and EEPROM.
INTERFACE: RS-232.
STORAGE CAPACITY: 15 presets.
DIMENSIONS: 19 inch (W), 7 inch (D), 2U (H) rack mountable.
POWER SOURCE: 230 VAC, 50/60 Hz, (115VAC, U.S.A.) 9.2 VA.
WEIGHT: 3.6 Kg. (8 Lbs.) Approx.
ACCESSORIES: Power cord, Windows 95/98 control software, Null modem adapter.
OPTIONS: Kramer VS-2516 reconfigurable video matrix switch.
Typical Applications:
# Any professional presentation system requiring 16x16 audio routing.
# Production and broadcast applications.
# Retail stores, restaurants, and sports bars.
Page 2.28
GROUP 2
2616- VSBalanced Stereo Matrix16 x16
The Kramer VS-2616 is a high performance 16x16 matrix switcher for balanced stereo audio
signals using detachable screw terminal connectors. It is a true matrix allowing any input to be routed
to any or all outputs simultaneously. The VS-2616 is designed to operate independently, or as a
companion to the Kramer VS-2516 video matrix switch. It offers excellent audio performance, easy
to use front panel, large LED I/O display, and 15 non-volatile user-programmable preset memory
settings. The VS-2616 can be controlled by front panel buttons, RS-232, or by the link with a Kramer
VS-2516 video matrix switch. For applications requiring control via a personal computer, Kramer’s
Windows™ compatible software is included at no additional cost. For creating larger systems, inputs
can be looped to form 16x32, 16x48, and other sizes.
Technical Specifications:
INPUTS: 16-Balanced Stereo Audio, looping, 5kΩ input impedance on terminal blocks, +4dBm nom.
OUTPUTS: 16 Balanced Stereo Audio, 50 Ohms on terminal blocks, +4dBm nom.
AUDIO BANDWIDTH: Exceeding 40 kHz.
CROSSTALK: Less than 70dB (1kHz).
THD: Less than 0.1%.
COUPLING: AC.
MAX. SIGNAL LEVEL: 20 Vpp.
AUDIO S/N: Better than 85 dB (+15 dBm).
CONTROL: Front panel switches, RS-232.
STORAGE CAPACITY: 15 presets.
DIMENSIONS: 19 inch (W), 7 inch (D), 2U (H) rack mountable.
POWER SOURCE: 230 VAC, 50/60 Hz, (115VAC, U.S.A.) 9.2 VA.
WEIGHT: 3.6 Kg. (8 Lbs.) Approx.
ACCESSORIES: Power cord, Windows 95/98 control software, Null modem adapter.
OPTIONS: Kramer VS-2516 reconfigurable video matrix switch.
Typical Applications:
# Any professional system requiring 16x16 audio routing.
# Production and broadcast applications.
# Retail stores, restaurants, and sports bars.
# Recording studios.
Page 2.29
GROUP 2
20x1 Video-Audio Scanner VS-120
The Kramer VS-120 is a programmable scanning video switcher designed to sequentially cycle
through up to 20 video and stereo audio sources. Operating stand-alone it accepts up to 20 inputs, but
multiple VS-120’s can be cascaded to allow as many as 2000 sources to be monitored. It is ideal as a
quality control tool in video duplication facilities as well as a sophisticated alarm camera scanner.
Switching is performed during the vertical interval for glitch-free transitions between genlocked sources.
The VS-120 can be controlled by front panel buttons, RS-232, or RS-485 commands transmitted by
a touch screen system, personal computer, or other serial controller. Operation is fully microprocessor
controlled. It is rugged, dependable, and is housed in a professional rack mountable enclosure, which
occupies two vertical spaces in a standard 19” rack.
Technical Specifications:
INPUTS: 20 video 1Vpp/75 Ω on BNC connectors.
20 stereo audio, 1Vpp/50kΩ on RCA connectors.
OUTPUTS: 1 video, 1Vpp / 75Ω on 2 BNCs, parallel connected.
1 stereo audio, 1Vpp/100Ω on 2x2 RCAs, parallel connected.
DB-9 for RS-232, 3 binding posts for RS-485.
DISPLAY: 4 seven-segment display LEDs, 20 LED status display.
CONTROLS: 12 key keypad control, 17 touch switch setup controls, RS-232, RS-485.
SWITCHING: Vertical Interval. DWELL TIME: 1 Sec - 60 Sec.
ERROR DETECTION: Sync detection. VIDEO BANDWIDTH: 25 MHz -3dB.
AUDIO BANDWIDTH: 20 kHz -1dB. DIFF. GAIN: 1.3%.
K-FACTOR: <0.05%.
DIMENSION: 19 inch (W), 7 inch (D), 2U (H) rack mountable.
POWER: 230 VAC, 50/60 Hz (115 VAC, U.S.A) 6.7 VA.
WEIGHT: 4.1 Kg. (9.1 Lbs.) Approx.
ACCESSORIES: Power cord, Windows 95/98 control software, Null modem adapter.
Typical Applications:
# Fully programmable, EPROM/NOV RAM memory for setup saves and recalls.
# Automatic error detection (sync failure or disconnection) in security systems.
# Monitoring in large duplication systems.

Navigation menu