Section 18 Grooved Products Effective 4 3 2011
User Manual: Section 18 - Grooved Products Effective 4-3-2011
Open the PDF directly: View PDF 
.
Page Count: 34
Effective Date 3/4/2011
U. S. List Prices
for
Grooved Piping
Price Book - TFPP General
Terms and Conditions of Sale
– 2 –
See latest catalog or technical data sheets for specific approvals, listings, and design parameters. Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
All products furnished by Tyco Fire Protection Products
(hereinafter “Seller”) shall be in accordance with the following
terms and conditions unless otherwise stated in writing:
ACCEPTANCE AND COMPLETE AGREEMENT - Buyer’s
order is binding only when accepted in writing at the principal
office of Seller. The terms and conditions of sale are only those
stated below, which shall constitute the complete agreement
between the parties and may not be altered or modified except
in writing duly executed by each party. The parties agree there
are no agreements between the parties, oral or written, with
respect to the products sold hereunder (including any made
or implied from past dealings) except as expressed herein.
No terms and conditions stated in or attached to Buyer’s
communications to Seller, including but not limited to Buyer’s
purchase orders, the terms of which are hereby rejected, are
applicable to these terms and conditions in any way and are
not to be considered Buyer’s exceptions to the provisions
of these terms and conditions. Trade custom, trade usage
and past performance are superseded by these terms and
conditions and shall not be used to interpret these terms and
conditions.
DELIVERY – Delivery dates are estimates only and are not
guaranteed. Seller will use every commercially reasonable
effort to make shipments as scheduled and may make partial
shipments.
EXPORTATION - If the products ordered are to be exported
from the United States, the quoted shipping dates are
subject to receipt of all export documents and authorizations.
Regardless of ultimate destination, the prices quoted are
based on packing for domestic shipment unless otherwise
stated in writing. Buyer agrees to provide Seller in writing
with the ultimate destination and identity of the end-user
prior to shipment if the products are to be exported. These
commodities, technology or software shall be exported from
the United States in accordance with the Export Administration
Regulations. Diversion contrary to U.S. law is prohibited.
Domestic Destinations – The Buyer of items shipping to USA
destinations is solely responsible for complying with applicable
U.S. export laws.
PRICES - Prices quoted, unless otherwise stated in writing,
do not include sales, use, excise or similar taxes or duties.
Buyer shall pay these taxes directly if the law permits or will
reimburse Seller if it is required to pay them. Buyer will provide
tax exemption certificates or evidence of tax payment on
request. Unless otherwise stated, prices are valid for 60 days
and for the delivery date specified in the quotation. Revisions
to the desired delivery date by the Buyer and delays not due to
Seller’s negligence may be subject to escalation of prices at
Seller’s sole discretion.
For direct and indirect U.S. government contracts only, all
Products and Services provided by Seller shall be considered
“commercial items” as defined in FAR Part 2, 2.101 and in
accordance with FAR 52.244-6. If the reasonableness of the
price cannot be established, if cost or pricing data is required
for any other reason, or if the Products or Services cannot be
considered “commercial items,” Seller may cancel the Contract
without liability.
PAYMENT - Standard payment terms are net thirty (30)
days from date of invoice. In the event credit has not been
established Seller reserves the right to require payment, or
the issuance of an irrevocable letter of credit, in advance of
shipment. Any amounts not paid when due shall bear interest
at the rate of 1 1/2% per month or at the highest rate permitted
by law (whichever is less), from the date of shipment until
paid. Seller reserves a purchase money security interest in
each product shipped, which will be satisfied by payment in
full. Seller has the right to file a copy of this document as a
financing statement.
SOLVENCY - Buyer’s order will be deemed a representation
that Buyer is solvent and able to pay for the products ordered.
If Buyer fails to make payments when due or if bankruptcy or
insolvency proceedings are instituted by or against Buyer, or if
Buyer makes an assignment for the benefit of creditors, Buyer
will be deemed to be in default and Seller will have the right to
terminate its obligations by written notice to Buyer, but such
termination will not affect Buyer’s obligation to pay for products
delivered and works in progress.
CANCELLATION - No products may be returned without prior
written approval of Seller. Orders placed with and accepted
by Seller may not be canceled except upon Seller’s written
consent prior to shipment and Buyer’s acceptance of Seller’s
cancellation charges which shall protect Seller against all
costs and losses. Seller reserves the right to cancel any sale
hereunder in Seller’s sole discretion without liability to Buyer
(except for refund of monies already paid).
MANUFACTURE - Seller reserves the right to discontinue
the manufacture of, or change or modify the design and/or
construction of the products sold pursuant to these terms and
conditions, without incurring any obligation to Buyer.
JURISDICTION AND DISPUTES - These terms and
conditions shall be governed in accordance with the law of
the Commonwealth of Pennsylvania. All disputes under these
terms and conditions shall be resolved by the state or federal
courts of the Commonwealth of Pennsylvania and the parties
all consent to the jurisdiction of such courts, agree to accept
service process by mail, and hereby waive any jurisdiction or
venue defenses otherwise available.
INSPECTION - All products must be inspected within five
(5) calendar days of receipt. If any damage is discovered, a
claim must be filed with the carrier. A full report of the damage
must be forwarded to Seller so that it can arrange for repair or
replacement.
Price Book - TFPP General
Terms and Conditions of Sale
– 3 –
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
TITLE –Unless otherwise provided on the face hereof, all
products furnished hereunder will be shipped “Ex-Works
(EX-W),” and title in, risk of loss, and the right of possession to
such goods shall pass to the Buyer upon the Seller’s delivery to
carrier at Seller’s shipping facility, and Seller is not responsible
for damage or loss in transit, regardless of whether or not
Buyer may have the right to reject or revoke acceptance of said
products. Seller can arrange for in-transit insurance at Buyer’s
expense, but will not do so without Buyer’s written instructions.
Unless otherwise stated in contract documents, all goods will
be shipped freight prepaid and billed. Charges for shipping
may not reflect net transportation cost paid by the Seller.
WARRANTY – Unless otherwise stated in quotation
documents or product literature provided with the product at
the time of sale, products manufactured by Tyco Fire Protection
Products (TFPP) are warranted solely to the original Buyer for
eighteen months (18) months from date of shipment or one
(1) year from date of installation against defects in material
and workmanship when paid for and properly installed and
maintained under normal use and service. In all cases, this
warranty will expire not later than ten (10) years from date
of shipment by TFPP. Warranty will be immediately voided
by substitution of non-TFPP provided parts. No warranty is
given for products or components manufactured by companies
not affiliated by ownership with TFPP or for products and
components which have been subject to misuse, improper
installation, corrosion, or which have not been installed,
maintained, modified or repaired in accordance with applicable
Standards of the National Fire Protection Association, and/
or the standards of any other Authorities Having Jurisdiction.
Materials found by TFPP to be defective shall be either
repaired or replaced, at TFPP’s sole option. TFPP neither
assumes, nor authorizes any person to assume for it, any other
obligation in connection with the sale of products or parts of
products. Seller shall not be responsible for sprinkler system
design errors or inaccurate or incomplete information supplied
by Buyer or Buyer’s representatives.
In no event shall TFPP be liable, in contract, tort, strict liability
or under any other legal theory, for incidental, indirect, special
or consequential damages, including but not limited to lost
profits and labor charges, regardless of whether TFPP was
informed about the possibility of such damages, and in no
event shall TFPP’s liability exceed an amount equal to the
sales price.
THE FOREGOING WARRANTY IS MADE IN LIEU OF ANY
AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.
This limited warranty sets forth the exclusive remedy for
claims based on failure of or defect in products, materials or
components, whether the claim is made in contract, tort, strict
liability or any other legal theory.
This warranty will apply to the full extent permitted by law. The
invalidity, in whole or part, of any portion of this warranty will
not affect the remainder.
COMPLIANCE WITH LAWS, CODES, AND STANDARDS -
Seller represents that the Products will be produced in
compliance with applicable fair labor standards laws,
occupational safety and health laws, and laws related to
nonsegregation and equal employment opportunity.
Warranties for design services and the accuracy of any
materials list provided by Seller shall be limited only to those
codes, standards or specification requirements specifically
stated in Seller’s quotation documents or transmittal sheets or
accepted change order or revisions and only as in effect at the
time of quotation or Seller accepted change revisions.
The Contract price, delivery and performance dates and any
performance guarantees will be equitably adjusted to reflect
additional costs or obligations incurred by Seller resulting
from a change in industry specifications, codes, standards,
applicable laws or regulations.
DRAWINGS - Any drawings submitted herewith are only
to show the general style, arrangement, and approximate
dimensions of the products offered. No work is to be based
on drawings unless the drawings are certified. In no event will
manufacturing or proprietary drawings be supplied.
CONFIDENTIALITY - Buyer agrees that all drawings, prints
and other technical material which Seller provides to Buyer,
whether prepared by Seller or by third parties under contract
to Seller, contain data which embody trade secrets and
confidential know-how of commercial value to Seller or third
parties under contract to Seller. Buyer agrees (a) to keep
such information confidential; (b) that it will not disclose such
information to any other person, corporate division or entity;
(c) will not use such information except in connection with the
products supplied hereunder; and (d) will not sell, lease, loan
or permit any other person, corporate division or entity to use
such information for any purpose, without Seller’s prior written
consent. Nothing herein shall restrict the use of information
generally available to the public.
PATENT INDEMNITY - If a product delivered by Seller to Buyer
becomes or, in Seller’s opinion, may become the subject of
any claim, suit or proceeding for infringement of any patent,
Seller may at its option and expense (i) obtain for Buyer the
right to use, lease or sell the product, (ii) replace the product,
(iii) modify the product, or (iv) remove the product and refund
the purchase price paid by Buyer less a reasonable amount
for use, damage or obsolescence. Seller will not be liable for
any infringement arising from any modification of a product,
from any combination of a product with any product(s), or from
the use of a product in practicing a process or unintended
applications. Seller’s total liability to Buyer will not, under any
circumstances exceed the purchase price paid for the allegedly
infringing product. Buyer agrees, at its expense, to protect
and defend Seller against any claim of patent infringement
arising from compliance with Buyer’s designs, specifications or
instructions and to hold Seller harmless from damages, costs
and expenses attributable to any such claim.
Price Book - TFPP General
Terms and Conditions of Sale
– 4 –
See latest catalog or technical data sheets for specific approvals, listings, and design parameters. Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
INDEMNITY – Buyer agrees to defend, indemnify and hold the
Seller (and its agents, representatives, employees, officers,
related companies, successors and assigns, and customers)
harmless from all claims, demands, actions, damages, and
liabilities (including attorney’s fees and consequential and
incidental damages) arising out of any injury (including death)
to any person or damage to any property in any way connected
with any act or omission of Buyer, its agents, employees, or
subcontractors.
EXCUSABLE DELAYS - Seller shall not be liable nor in
breach or default of its obligations under the Contract to the
extent performance of such obligations is delayed or prevented,
directly or indirectly, due to causes beyond its reasonable
control, including, but not limited to, acts of God, fire, terrorism,
war (declared or undeclared), epidemics, material shortages,
insurrection, acts (or omissions) of Buyer or Buyer’s suppliers
or agents, any act (or omission) by any governmental authority,
strikes, labor disputes, transportation shortages, or vendor
non-performance. The delivery or performance date shall be
extended for a period equal to the time lost by reason of delay,
plus such additional time as may be reasonably necessary to
overcome the effect of the delay. If Seller is delayed by any
acts (or omissions) of Buyer, or by the prerequisite work of
Buyer’s other contractors or suppliers, Seller shall be entitled to
an equitable price and performance adjustment.
WAIVER - No failure to exercise and no delay in exercising
on the part of Seller any right, power or privilege hereunder
will operate as a waiver thereof nor will any single or partial
exercise of any right, power or privilege hereunder preclude
further exercise of the same right, power or privilege.
VALIDITY OF PROVISIONS - In the event any provision or any
part or portion of any provision of these Terms and Conditions
shall be held to be invalid, void or otherwise unenforceable,
such holding shall not affect the remaining part or portions of
that provision, or any other provision hereof.
Additional Terms and Conditions of Sale
Return Goods Policy
1. The request to return material must include the description
of material, reason for return, customer order number
and/or customer invoice number to enable the request to
be processed. No materials may be returned without this
information.
2. When the request is approved, a Return Authorization form
will be completed and include a predetermined number
for reference and advise where the material should be
returned. The Return Authorization form will contain a
Packing list copy which must accompany materials when
they are returned. Return Authorizations are valid for 30
days only from date of issue.
3. No credit will be issued for returned materials without an
approved Return Authorization.
4. Materials being returned due to order entry and/or shipping
errors on the part of TFPP will be credited at full value
providing the materials are returned within 30 days from
the date of the original shipment.
5. Credit of the actual price paid will be issued for defective
materials only after the material has been inspected and
verified to contain a defect by TFPP.
6. A 25% restocking charge and/or a $25.00 minimum
charge, whichever is greater, will be assessed for
inspecting, handling and restocking the material, and
the total credit will depend upon the resale value of
the material. Returned freight will be at the customer’s
expense.
7. Items purchased for resale by TFPP may be returned
under the Manufacturer’s terms and conditions only. If the
Manufacturer will not accept the materials, credit will not
be issued by TFPP to the Buyer.
8. Special material orders and made-to-order products are
non-returnable.
9. Credit will not be issued for discontinued items. Items
no longer manufactured or items superseded by another
model are defined as discontinued.
10. In order to receive consideration for credit, material must
be returned less than 2 years from date of original invoice
and of reasonable quantities.
11. To receive consideration for credit, material must be in
resalable condition.
12. Material that has been approved for return must be packed
in such a way as to prevent damage during shipment. The
use of original packaging is preferred. Credit cannot be
issued for materials damaged in transit due to improper
packaging.
Minimum Billing
The Minimum Billing Policy is $100.00 per Order.
– 5 –
Price Book
Table of Contents *
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
Section 18 - Grooved Products
#577 Import and Domestic – Rigid Coupling with Grade “A” EPDMA Fire Protection Pre-Lubricated Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-1
#577 Domestic – Rigid Tri-Seal Coupling with Grade “E” EPDM Tri-Seal Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-1
#705 Import and Domestic – Flexible Coupling with Grade “A” EPDMA Fire Protection Pre-Lubricated Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-2
#705 Domestic – Flexible Tri-Seal Coupling with Grade “E” EPDM Tri-Seal Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-2
#707 Domestic Heavy-Duty Flexible Coupling with Grade “E” EPDM Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-3
#707 Domestic Heavy-Duty Flexible Coupling with Grade “E” EPDM Tri-Seal Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-3
#716 Domestic – Reducing Coupling with Grade “E” EPDM Non-Lubricated Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-4
#716 Reducing Coupling Plate ..................................................................................................18-4
Replacement Gaskets, Grade “E” EPDM Gasket for #716 Reducing Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-4
#71 Domestic – Grooved Flange Adapter with Grade “E” EPDM Non-Lubricated Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-5
#71 Flange Adapter – Metal Washer & Nut, Bolt, and Gasket Kit .........................................................................18-5
#702 Import – Outlet Coupling Grade “E” Gasket, Female Threaded End, Painted* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-6
#702 Import – Outlet Coupling Grade “E” Gasket, Male Threaded End, Painted* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-6
#702 Import – Outlet Coupling Grade “E” Gasket, Grooved End, Painted* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-6
Replacement Gaskets .........................................................................................................18-7
Coupling Nut and Bolt Kit ......................................................................................................18-7
GRINNELL Gasket Lubricant. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-7
Pipe Tape ..................................................................................................................18-7
#510S Import and Domestic – Fire Protection Short Pattern Grooved 90° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-8
#510 Import and Domestic – Fire Protection Standard Pattern Grooved 90° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-8
#501 Import and Domestic – Fire Protection Standard Pattern Grooved 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-8
#512 Domestic – Grooved 221/2° Elbow ...........................................................................................18-9
#511 Domestic – Grooved 111/4° Elbow ...........................................................................................18-9
#510DE Domestic – 90° Elbow with 1" Outlet .......................................................................................18-9
#519S Import and Domestic – Fire Protection Short Pattern Grooved Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-10
#519 Import and Domestic – Fire Protection Standard Pattern Grooved Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-10
#260 Domestic and Import – Grooved Cap ........................................................................................18-11
#260 Domestic and Import – Grooved Cap with 1/2" Tap ..............................................................................18-11
#260 Domestic and Import – Grooved Cap with 1" Tap ...............................................................................18-11
#321 Domestic – Grooved Reducing Tee .........................................................................................18-12
#550 and #350 Domestic – Concentric Reducer ....................................................................................18-13
#341 Domestic – Grooved x Flanged Adapter 150 Lbs. – Schedule 40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-14
#342 Domestic – Grooved x Flanged Adapter 300 Lbs. – Schedule 40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-14
#320 Domestic – Grooved x Male Thread Tee, Painted ...............................................................................18-14
Standpipe Domestic – Tee ....................................................................................................18-14
#507/#50L Domestic – Bullhead Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-14
#323 Domestic – Reducing Tee with Threaded Branch ...............................................................................18-15
#327 Domestic – Grooved Cross ...............................................................................................18-15
#372 Domestic – Reducer Small End Threaded (Male) ...............................................................................18-16
#391 Domestic – Groove x Male Thread Adapter Nipple ..............................................................................18-16
#392 Domestic – Groove x Groove Adapter Nipple ..................................................................................18-17
#393 Domestic – Groove x Plain Adapter Nipple ....................................................................................18-17
#730 Domestic – Threaded Mechanical Tee with Grade “E” EPDM Gasket Threaded Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-18
#730 Domestic – Grooved Mechanical Tee with Grade “E” EPDM Gasket Grooved Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-19
#730 Domestic – Threaded Mechanical Cross with Grade “E” EPDM Gasket Threaded Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-20
#730 Domestic – Grooved Mechanical Cross with Grade “E” EPDM Gasket Grooved Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-21
#40-5 Domestic – Strap ......................................................................................................18-22
ADACAP #750 Domestic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-22
#BFV-N Domestic – Grooved Butterfly Valves Fire Protection ..........................................................................18-23
#CV-1F Import – Grooved Check Valve ...........................................................................................18-23
Roll Grooving Machine Selection Chart ..........................................................................................18-24
Roll Grooving – Accessories ...................................................................................................18-24
Roll Grooving – Roll Selection Chart .............................................................................................18-25
Domestic Grooved Couplings – Packaging Quantity ................................................................................18-26
Domestic Grooved Fittings – Packaging Quantity ............................................................................18-26 – 18-27
Grooved Fittings – Pieces Per Carton/Case ........................................................................................18-27
Import Grooved Couplings – Packaging Quantity ...................................................................................18-28
Import Grooved Fittings – Packaging Quantity .....................................................................................18-28
*As used in this Table of Contents and Price Book, the designation “domestic” is meant to identify where the last point of manufacture or assembly takes place for a
product. However, this designation does not represent compliance with any government regulatory standards or contract specifications and should not be relied
upon for such purposes. You must request separate certifications or other representations concerning the specific regulatory standards or contract specifications
which apply for your application.
In order to request regulatory or specification certifications/ representations please contact Tyco Trade Compliance at 215-362-0700 for assistance. In your request,
please identify the part numbers and specific regulatory standards or contract specifications about which you are inquiring.
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 1
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod ucts
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
#577 Import and Domestic – Rigid Coupling
with Grade “A” EPDMA Fire Protection Pre-Lubricated Gasket
Nom.
Size
Painted Galvanized
Import Domestic Import Domestic
Part Number List Price Part Number List Price Part Number List Price Part Number List Price
1" ––57701ASC $24.00 ––57701AGSC $33.50
11/4"57713ACP $21.75 57713ASC $26.75 57713AGCP $30.50 57713AGSC $37.25
11/2"57715ACP $22.50 57715ASC $27.50 57715AGCP $31.50 57715AGSC $37.25
2" 57720ACP $24.00 57720ASC $30.00 57720AGCP $34.00 57720AGSC $42.00
21/2"57725ACP $28.00 57725ASC $34.75 57725AGCP $39.50 57725AGSC $48.75
3" 57730ACP $32.75 57730ASC $40.00 57730AGCP $46.50 57730AGSC $57.50
4" 57740ACP $42.75 57740ASC $53.50 57740AGCP $60.50 57740AGSC $75.25
5" 57750ACP $74.75 57750ASC $92.00 57750AGCP $105.50 57750AGSC $130.00
6" 57760ACP $74.75 57760ASC $92.00 57760AGCP $105.50 57760AGSC $130.00
8" 57780ACP $127.00 57780ASC $153.50 57780AGCP $179.50 57780AGSC $220.50
10" 57710ACP $319.0 57710ASC $385.00 57710AGCP $399.75 57710AGSC $491.00
12" 57712ACP $391.25 57712ASC $472.00 57712AGCP $483.75 57712AGSC $594.00
Technical Data Sheet: TFP1854
#577 Domestic – Rigid Tri-Seal Coupling
with Grade “E” EPDM Tri-Seal Gasket Recommended for
Dry Pipe Systems and Freezer Applications – Use Silicone Lubricant
Nom.
Size
Painted Galvanized
Domestic
Part Number List Price Domestic
Part Number List Price
1" 57701E3S POA 57701E3GS POA
11/4"57713E3S $33.50 57713E3GS $38.25
11/2"57715E3S $33.50 57715E3GS $38.25
2" 57720E3S $36.25 57720E3GS $43.00
2 1/2"57725E3S $42.50 57725E3GS $50.00
3" OD 57730E3MS $44.25 57730E3GMS $50.00
3" 57730E3S $46.75 57730E3GS $55.00
4" 57740E3S $66.00 57740E3GS $76.25
5" 57750E3S $122.00 57750E3GS $143.50
6" 57760E3S $122.00 57760E3GS $143.50
61/2" OD 57760E3MS $125.50 57760E3MGS $143.50
8" 57780E3S $193.00 57780E3GS $224.00
10" 57710E3S $386.50 57710E3GS $428.50
12" 57712E3S $485.00 57712E3GS $552.50
Technical Data Sheet: TFP1854
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 2
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod uct
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
#705 Import and Domestic – Flexible Coupling
with Grade “A” EPDMA Fire Protection Pre-Lubricated Gasket
Nom.
Size
Painted Galvanized
Import Domestic Import Domestic
Part Number List Price Part Number List Price Part Number List Price Part Number List Price
11/4"70513ACP $22.00 70513ASC $29.00 70513AGCP $30.50 70513AGSC $40.50
11/2"70515ACP $22.50 70515ASC $29.00 70515AGCP $31.50 70515AGSC $40.50
2" 70520ACP $29.00 70520ASC $38.50 70520AGCP $42.50 70520AGSC $56.00
21/2"70525ACP $34.00 70525ASC $44.50 70525AGCP $53.50 70525AGSC $69.00
3" O.D. ––70530AMSC $52.00 ––70530AMGSC $77.50
3" 70530ACP $38.00 70530ASC $50.00 70530AGCP $59.50 70530AGSC $77.50
4" 70540ACP $51.00 70540ASC $75.00 70540AGCP $79.00 70540AGSC $115.00
5" ––70550ESC $131.50 ––70550EGSC $205.00
6" 70560ACP $94.00 70560ASC $130.00 70560AGCP $147.00 70560AGSC $202.00
61/2" O.D. ––70560AMSC $134.50 ––70560AMGSC $202.00
8" 70580ACP $166.50 70580ASC $223.50 70580AGCP $263.00 70580AGSC $350.00
10" ––70510ESC $514.50 ––70510EGSC $718.50
12" ––70512ESC $619.50 ––70512EGSC $870.50
Orders for items in shaded areas cannot be cancelled or returned.
Technical Data Sheet: TFP1820
#705 Domestic – Flexible Tri-Seal Coupling
with Grade “E” EPDM Tri-Seal Gasket Recommended for
Dry Pipe Systems and Freezer Applications – Use Silicone Lubricant
Nom.
Size
Painted Galvanized
Domestic
Part Number List Price Domestic
Part Number List Price
11/4"70513E3S $36.50 70513E3GS $41.25
11/2"70515E3S $36.50 70515E3GS $41.25
2" 70520E3S $42.50 70520E3GS $61.75
21/2"70525E3S $49.00 70525E3GS $76.00
3" O.D. 70530E3MS $57.25 70530E3MGS $85.25
3" 70530E3S $55.00 70530E3GS $85.25
4" 70540E3S $82.50 70540E3GS $126.50
5" 70550E3S $144.75 70550E3GS $225.50
6" 70560E3S $144.75 70560E3GS $225.50
61/2" O.D. 70560E3MS $148.00 70560E3MGS $225.50
8" 70580E3S $246.00 70580E3GS $385.00
10" 70510E3S $566.00 70510E3GS $790.50
12" 70512E3S $681.50 70512E3GS $957.75
Orders for items in shaded areas cannot be cancelled or returned.
Technical Data Sheet: TFP1820
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 3
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod ucts
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
#707 Domestic Heavy-Duty Flexible Coupling
with Grade “E” EPDM Gasket
Nominal
Size
Painted Galvanized
Domestic
Part Number List Price Domestic
Part Number List Price
1" 70701ES $33.50 70701EGS $45.00
11/2"70715ES $48.00 70715EGS $63.00
2" 70720ES $51.50 70720EGS $68.50
21/2"70725ES $60.00 70725EGS $84.50
3" 70730ES $67.00 70730EGS $93.00
4" 70740ES $96.50 70740EGS $136.50
5" 70750ES $146.50 70750EGS $211.00
6" 70760ES $173.50 70760EGS $249.50
8" 70780ES $282.50 70780EGS $420.50
10" 70710ES $460.50 70710EGS $660.00
12" 70712ES $523.50 70712EGS $750.00
Technical Data Sheet: TFP1840
#707 Domestic Heavy-Duty Flexible Coupling
with Grade “E” EPDM Tri-Seal Gasket Recommended for
Dry Pipe Systems and Freezer Applications – Use Silicone Lubricant
Nominal
Size
Painted Galvanized
Domestic
Part Number List Price Domestic
Part Number List Price
11/2"70715E3S $68.00 70715E3GS $84.50
2" 70720E3S $71.00 70720E3GS $89.00
21/2"70725E3S $86.50 70725E3GS $110.50
3" 70730E3S $89.50 70730E3GS $116.50
4" 70740E3S $129.50 70740E3GS $170.00
5" 70750E3S $227.50 70750E3GS $295.00
6" 70760E3S $251.50 70760E3GS $330.50
8" 70780E3S $340.00 70780E3GS $466.50
10" 70710E3S $546.50 70710E3GS $735.00
12" 70712E3S $642.00 70712E3GS $845.00
Orders for items in shaded areas cannot be cancelled or returned.
Technical Data Sheet: TFP1840
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 4
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod uct
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
#716 Domestic – Reducing Coupling
with Grade “E” EPDM Non-Lubricated Gasket
Nom.
Size
Painted Galvanized
Domestic
Part Number List Price Domestic
Part Number List Price
2" x 11/2"7162015ES $59.25 7162015EGS $85.75
21/2" x 2" 7162520ES $84.75 7162520EGS $118.00
3" x 2" 7163020ES $88.25 7163020EGS $145.50
3" x 21/2"7163025ES $88.25 7163025EGS $145.50
4" x 2" 7164020ES $114.50 7164020EGS $165.50
4" x 21/2"7164025ES $114.50 7164025EGS $165.50
4" x 3" 7164030ES $138.00 7164030EGS $200.00
5" x 4" 7165040ES $186.50 7165040EGS $268.50
6" x 4" 7166040ES $255.00 7166040EGS $333.00
6" x 5" 7166050ES $268.00 7166050EGS $370.50
8" x 6" 7168060ES $387.50 7168060EGS $558.50
Technical Data Sheet: TFP1830
#716 Reducing Coupling Plate
G
R
I
N
N
E
L
L
C
o
u
p
l
i
n
g
P
l
a
t
e
Nom. Size Plate Part No. List Price
2" x 11/2"7162015W $36.75
21/2" x 2" 7162520W $36.75
3" x 2" 7163020W $56.50
3" x 21/2"7163025W $56.50
4" x 2" 7164020W $60.00
4" x 21/2"7164025W $60.00
4" x 3" 7164030W $60.00
5" x 4" 7165040W $60.00
6" x 4" 7166040W $82.00
6" x 5" 7166050W $82.00
8"x 6" 7168060W $112.00
Orders for items in shaded areas cannot be cancelled or returned.
Replacement Gaskets, Grade “E” EPDM Gasket for #716 Reducing Coupling
G
R
I
N
N
E
L
L
G
r
a
d
e
“
E
”
E
P
D
M
Nom. Size Plate Part No. List Price
2" x 11/2"2015EPDME $25.50
21/2" x 2" 2520EPDME $33.50
3" x 2" 3020EPDME $38.00
3" x 21/2"3025EPDME $38.00
4" x 2" 4020EPDME $44.00
4" x 21/2"4025EPDME $44.50
4" x 3" 4030EPDME $46.50
5" x 4" 5040EPDME $54.00
6" x 4" 6040EPDME $61.50
6" x 5" 6050EPDME $67.00
8"x 6" 8060EPDME $74.50
Orders for items in shaded areas cannot be cancelled or returned.
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 5
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod ucts
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
#71 Domestic – Grooved Flange Adapter
with Grade “E” EPDM Non-Lubricated Gasket
Nom.
Size
Painted Galvanized
Domestic
Part Number List Price Domestic
Part Number List Price
2" 7120S $110.50 7120GS $127.50
21/2"7125S $132.50 7125GS $153.50
3" 7130S $146.50 7130GS $175.50
4" 7140S $189.50 7140GS $231.00
5" 7150S $230.50 7150GS $277.00
6" 7160S $234.50 7160GS $307.50
8" 7180S $310.00 7180GS $390.50
10" 7110S $548.00 7110GS $792.50
12" 7112S $792.50 7112GS $1,138.00
Orders for items in shaded areas cannot be cancelled or returned.
Technical Data Sheet: TFP1880
#71 Flange Adapter – Metal Washer
G
R
I
N
N
E
L
L
M
e
t
a
l
W
a
s
h
e
r
Nom. Size Washer Part No. List Price
2" 7120FWC $51.50
21/2"7125FWC $62.25
3" 7130FWC $62.25
4" 7140FWC $75.50
5" 7150FWC $84.25
6" 7160FWC $97.25
8" 7180FWC $150.50
10" 7110FWC $194.50
12" 7112FWC $207.50
Orders for items in shaded areas cannot be cancelled or returned.
#71 Flange Adapter – Nut, Bolt, and Gasket Kit
G
R
I
N
N
E
L
L
G
a
s
k
e
t
Nom. Size NBG Kit List Price
2" 50240 $15.00
21/2"50241 $15.00
3" 50242 $15.00
4" 50243 $26.50
5" 50248 $40.50
6" 50244 $41.75
8" 50245 $46.25
10" 50246 $106.00
12" 50247 $116.50
Orders for items in shaded areas cannot be cancelled or returned.
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 6
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod uct
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
#702 Import – Outlet Coupling
Grade “E” Gasket, Female Threaded End, Painted*
Nominal
Size
Import
Part Number List Price
11⁄2" x 1⁄2"7021505FES $91.00
11⁄2" x 3⁄4"7021575FES $91.00
11⁄2" x 1" 7021501FES $91.00
2" x 1⁄2"7022005FES $93.00
2" x 3⁄4"7022075FES $93.00
2" x 1" 7022001FES $93.00
21⁄2" x 1⁄2"7022505FES $143.00
21⁄2" x 3⁄4"7022575FES $143.00
21⁄2" x 1" 7022501FES $143.00
3" x 3⁄4"7023075FES $138.00
3" x 1" 7023001FES $182.50
4" x 3⁄4"7024075FES $202.50
4" x 1" 7024001FES $202.50
4" x 11⁄2"7024015FES $287.50
6" x 1" 7026001FES $406.50
6" x 11⁄2"7026015FES $406.50
Orders for items in shaded areas cannot be cancelled or returned.
* Galvanized available upon request.
#702 Import – Outlet Coupling
Grade “E” Gasket, Male Threaded End, Painted*
Nominal
Size
Import
Part Number List Price
2" x 1" 7022001MES $93.00
21⁄2" x 11⁄4"7022513MES $161.50
21⁄2" x 11⁄2"7022515MES $182.50
3" x 1" 7023001MES $182.50
3" x 11⁄2"7023015MES $209.50
4" x 11⁄2"7024015MES $287.50
4" x 2" 7024020MES $287.50
6" x 11⁄2"7026015MES $406.50
6" x 2" 7026020MES $406.50
* Galvanized available upon request.
#702 Import – Outlet Coupling
Grade “E” Gasket, Grooved End, Painted*
Nominal
Size
Import
Part Number List Price
2" x 1" 7022001GRVES $93.00
21⁄2" x 11⁄4"7022513GRVES $161.50
21⁄2" x 11⁄2"7022515GRVES $182.50
3" x 1" 7023001GRVES $182.50
3" x 11⁄2"7023015GRVES $209.50
4" x 11⁄2"7024015GRVES $287.50
4" x 2" 7024020GRVES $287.50
6" x 11⁄2"7026015GRVES $406.50
6" x 2" 7026020GRVES $406.50
* Galvanized available upon request.
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 7
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod ucts
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
Replacement Gaskets
Nominal
Size
Grade "A" Pre-Lube Fire Protection Gasket
(for #772, #705, #577)
Tri-Seal Grade "E" EPDM Gasket
(for #772, #705)
Grade "E" EPDM Gasket
(for #71)
11/4"13EPDMAC $21.75 13EPDME3 $25.75 ——
11/2"15EPDMAC $21.75 15EPDME3 $26.00 ——
2" 20EPDMAC $21.75 20EPDME3 $26.25 7120EPDME $38.75
21/2"25EPDMAC $28.00 25EPDME3 $32.00 7125EPDME $45.00
3" O.D. 30MEPDMAC $29.25 30MEPDME3 $32.75 ——
3" 30EPDMAC $29.25 30EPDME3 $36.75 7130EPDME $48.50
4" 40EPDMAC $37.75 40EPDME3 $45.00 7140EPDME $57.25
5" 50EPDMEC $57.75 50EPDME3 $60.75 7150EPDME $67.75
6" 60EPDMAC $53.50 60EPDME3 $67.25 7160EPDME $79.25
61/2" O.D. 60MEPDMAC $56.00 60MEPDME3 $68.00 ——
8" 80EPDMAC $75.00 80EPDME3 $88.25 7180EPDME $101.50
10" 10EPDMEC $131.00 10EPDME3 $144.50 7110EPDME $122.50
12" 12EPDMEC $136.50 12EPDME3 $150.50 7112EPDME $145.00
Orders for items in shaded areas cannot be cancelled or returned.
Technical Data Sheet: TFP1895
Coupling Nut and Bolt Kit
Nominal Size Qty/Kit Part No. List Price
3/8" x 21/4" 2 NB37225 $12.00
1/2" x 3" 2 NB50300 $12.50
5/8" x 31/4" 2 NB62325 $15.00
5/8" x 43/4" 2 NB62475 $25.50
3/4" x 43/4" 2 NB75475 $23.50
7/8" x 61/2" 2 NB87650 $40.00
1" x 51/2" 3 NB10550 $40.00
1" x 61/2" 2 NB10650 $42.50
11/8" x 53/4" 4 NB12575 $54.50
Orders for items in shaded areas cannot be cancelled or returned.
All standard couplings can be provided with stainless steel nuts and bolts upon request.
GRINNELL Gasket Lubricant
G
R
I
N
N
E
L
L
Size Part Number List Price
1 Quart 32005 $16.25
GRINNELL Silicone Gasket Lubricant
Recommended for use with Tri-Seal Gaskets. Dow Corning #DC No. 7. *
Size Part Number List Price
5.30 oz. Tube 32037 $97.00
8 lb. Can 32038 $1,762.00
Orders for items in shaded areas cannot be cancelled or returned.
Silicone gasket lubricant is for use with Dry Pipe & Freezing Applications.
Pipe Tape Chrome Plated with GRINNELL Logo
Size Part
Number List Price
1 Roll PT1000 $51.00
* Dow Corning is a trademark of Dow Corning Corporation.
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 8
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod uct
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
#510S Import and Domestic – Fire Protection Short Pattern Grooved 90° Elbow
Nom.
Size
Painted Galvanized
Import Domestic Import Domestic
Part Number List Price Part Number List Price Part Number List Price Part Number List Price
2" 510S20P $19.00 510S20S $26.00 510S20GP $29.75 510S20GS $36.00
21/2"510S25P $27.50 510S25S $31.00 510S25GP $43.00 510S25GS $47.50
3" 510S30P $37.75 510S30S $41.25 510S30GP $59.00 510S30GS $64.00
4" 510S40P $54.75 510S40S $58.75 510S40GP $86.25 510S40GS $91.75
6" 510S60P $155.00 510S60S $167.50 510S60GP $243.00 510S60GS $254.50
8" 510S80P $305.50 510S80S $321.00 510S80GP $478.50 510S80GS $503.00
All elbows are cast fittings.
Technical Data Sheet: TFP1810
#510 Import and Domestic – Fire Protection Standard Pattern Grooved 90° Elbow
Nom.
Size
Painted Galvanized
Import Domestic Import Domestic
Part Number List Price Part Number List Price Part Number List Price Part Number List Price
11/4"51013P $20.75 51013S $27.25 51013GP $32.25 51013GS $36.50
11/2"51015P $20.75 51015S $27.25 51015GP $32.50 51015GS $36.50
2" 51020P $22.00 51020S $29.75 51020GP $34.25 51020GS $42.75
21/2"51025P $31.00 51025S $34.50 51025GP $48.75 51025GS $54.00
3" 51030P $43.75 51030S $48.50 51030GP $68.25 51030GS $76.00
4" 51040P $61.75 51040S $68.00 51040GP $97.00 51040GS $107.00
5" ––21050S $190.50 ––21050GS $298.50
6" 51060P $174.00 51060S $190.50 51060GP $273.00 51060GS $298.50
8" 51080P $348.50 51080S $382.00 51080GP $545.50 51080GS $598.00
10" 51010P $702.50 21010S $824.00 51010GP $955.50 21010GS $1,208.00
12" 51012P $1,283.00 21012S $1,503.00 51012GP $1,746.00 21012GS $1,929.00
All elbows are cast fittings.
Technical Data Sheet: TFP1810
#501 Import and Domestic – Fire Protection Standard Pattern Grooved 45° Elbow
Nom.
Size
Painted Galvanized
Import Domestic Import Domestic
Part Number List Price Part Number List Price Part Number List Price Part Number List Price
11/4"50113P $19.75 50113S $27.25 50113GP $31.25 50113GS $36.50
11/2"50115P $20.75 50115S $27.25 50115GP $32.25 50115GS $36.50
2" 50120P $22.75 50120S $29.75 50120GP $36.25 50120GS $42.75
21/2"50125P $31.00 50125S $34.50 50125GP $48.50 50125GS $54.00
3" 50130P $42.75 50130S $48.50 50130GP $66.75 50130GS $76.00
4" 50140P $60.25 50140S $68.00 50140GP $95.00 50140GS $107.00
5" ––20150S $190.50 ––20150GS $298.50
6" 50160P $169.00 50160S $190.50 50160GP $265.50 50160GS $298.50
8" 50180P $337.50 50180S $382.00 50180GP $529.00 50180GS $598.00
10" 50110P $702.50 20110S $824.00 50110GP $955.50 20110GS $1,208.00
12" 50112P $1,283.00 20112S $1,503.00 50112GP $1,746.00 20112GS $1,929.00
All elbows are cast fittings.
Orders for items in shaded areas cannot be cancelled or returned.
Technical Data Sheet: TFP1810
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 9
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod ucts
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
#512 Domestic – Grooved 221/2° Elbow
Nom.
Size
Painted Galvanized
Domestic
Part Number List Price Domestic
Part Number List Price
11/4" *51213S $59.00 51213GS $75.25
11/2" *51215S $59.00 51215GS $75.25
2" *51220S $59.00 51220GS $75.25
21/2" *51225S $59.00 51225GS $75.25
3" *51230S $85.25 51230GS $108.00
4" *51240S $113.50 51240GS $147.00
5" *51250S $353.00 51250GS $421.50
6" *51260S $319.50 51260GS $407.00
8" *51280S $666.00 51280GS $827.50
10" 75559 $1,102.00 75579 $1,786.00
12" 75560 $1,115.00 75580 $2,411.00
Elbow is segmentally welded except where a * indicates it is available as a cast fitting.
Orders for items in shaded areas cannot be cancelled or returned.
Technical Data Sheet: TFP1810
#511 Domestic – Grooved 111/4° Elbow
Nom.
Size
Painted Galvanized
Domestic
Part Number List Price Domestic
Part Number List Price
11/4" *51113S $59.00 51113GS $75.25
11/2" *51115S $59.00 51115GS $75.25
2" *51120S $137.50 51120GS $161.00
21/2" *51125S $137.50 51125GS $161.00
3" *51130S $85.25 51130GS $106.50
4" *51140S $105.00 51140GS $140.00
5" *51150S $349.50 51150GS $411.00
6" *51160S $386.00 51160GS $386.00
8" *51180S $569.00 51180GS $676.50
10" 75309 $1,102.00 75315 $1,786.00
12" 75310 $1,488.00 75323 $2,411.00
Elbow is segmentally welded except where a * indicates it is available as a cast fitting.
Orders for items in shaded areas cannot be cancelled or returned.
Technical Data Sheet: TFP1810
#510DE Domestic – 90° Elbow with 1" Outlet
Nom.
Size
Painted Galvanized
Domestic
Part Number List Price Domestic
Part Number List Price
2" 51020DS $110.00 ––
21/2" *51025DS $110.00 51025DGS $142.00
3" *51030DS $120.00 51030DGS $199.00
4" *51040DS $139.00 51040DGS $230.50
6" *51060DS $198.50 51060DGS $329.50
8" *51080DS $335.50 51080DGS $558.50
Elbow is segmentally welded except where a * indicates it is available as a cast fitting.
Orders for items in shaded areas cannot be cancelled or returned.
Technical Data Sheet: TFP1810
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 10
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod uct
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
#519S Import and Domestic – Fire Protection Short Pattern Grooved Tee
Nom.
Size
Painted Galvanized
Import Domestic Import Domestic
Part Number List Price Part Number List Price Part Number List Price Part Number List Price
2" 519S20P $29.75 519S20S $37.25 519S20GP $46.25 519S20GS $51.75
21/2"519S25P $43.50 519S25S $47.00 519S25GP $67.75 519S25GS $68.50
3" 519S30P $61.00 519S30S $66.00 519S30GP $95.50 519S30GS $96.25
4" 519S40P $93.25 519S40S $101.00 519S40GP $146.50 519S40GS $148.00
6" 519S60P $228.50 519S60S $271.50 519S60GP $358.50 519S60GS $398.00
8" 519S80P $537.50 519S80S $578.00 519S80GP $843.00 519S80GS $846.50
All tees are cast fittings.
Technical Data Sheet: TFP1810
#519 Import and Domestic – Fire Protection Standard Pattern Grooved Tee
Nom.
Size
Painted Galvanized
Import Domestic Import Domestic
Part Number List Price Part Number List Price Part Number List Price Part Number List Price
11/4"51913P $25.75 51913S $41.50 51913GP $37.75 51913GS $48.75
11/2"51915P $25.75 51915S $41.50 51915GP $37.75 51915GS $48.75
2" 51920P $38.25 51920S $44.25 51920GP $55.50 51920GS $61.50
21/2"51925P $50.50 51925S $55.75 51925GP $71.75 51925GS $81.50
3" 51930P $71.00 51930S $78.50 51930GP $104.00 51930GS $114.50
4" 51940P $109.50 51940S $120.00 51940GP $160.00 51940GS $176.00
5" ––21950S $322.50 ––21950GS $472.50
6" 51960P $295.50 51960S $322.50 51960GP $431.00 51960GS $472.50
8" 51980P $627.00 51980S $687.00 51980GP $918.50 51980GS $1,006.00
10" 51910P $1,582.00 21910S $1,851.00 51910GP $2,151.00 21910GS $2,261.00
12" 51912P $2,156.00 21912S $3,029.00 51912GP $2,934.00 21912GS $3,170.00
All tees are cast fittings.
Orders for items in shaded areas cannot be cancelled or returned.
Technical Data Sheet: TFP1810
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 11
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod ucts
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
#260 Domestic and Import – Grooved Cap
Nom.
Size
Painted Galvanized
Import Domestic Import Domestic
Part Number List Price Part Number List Price Part Number List Price Part Number List Price
11/4"26013P $9.95 26013S $12.50 26013GP $15.25 26013GS $19.00
11/2"26015P $12.00 26015S $13.50 26015GP $19.00 26015GS $21.25
2" 26020P $14.00 26020S $16.00 26020GP $21.75 26020GS $24.50
21/2"26025P $16.25 26025S $19.00 26025GP $26.00 26025GS $29.50
3" O.D. ––26030MS $23.00 ––26030MGS $36.50
3" 26030P $20.75 26030S $23.50 26030GP $32.00 26030GS $36.50
4" 26040P $31.25 26040S $35.75 26040GP $49.00 26040GS $55.00
5" 26050P POA 26050S $76.25 26050GP POA 26050GS $107.00
6" 26060P $84.50 26060S $95.25 26060GP $133.00 26060GS $148.50
61/2" O.D. ––26060MS $103.00 ––26060MGS $148.50
8" 26080P $142.50 26080S $156.00 26080GP $224.00 26080GS $245.50
10" 26010P $303.00 26010S $319.50 26010GP $670.00 26010GS $521.50
12" 26012P $488.50 26012S $535.50 26012GP $766.50 26012GS $840.00
All caps are cast fittings.
Orders for items in shaded areas cannot be cancelled or returned.
Technical Data Sheet: TFP1810
#260 Domestic and Import – Grooved Cap with 1/2" Tap
Nom.
Size
Painted
Import Domestic
Part Number List Price Part Number List Price
2" 26020TP $129.50 26020TS $149.00
21/2"26025TP $137.50 26025TS $158.00
3" 26030TP $157.00 26030TS $181.50
4" 26040TP $208.00 26040TS $236.50
5" ––26050TS $376.50
6" 26060TP $381.50 26060TS $425.50
8" 26080TP $716.50 26080TS $796.00
All caps are cast fittings.
Technical Data Sheet: TFP1810
#260 Domestic and Import – Grooved Cap with 1" Tap
Nom.
Size
Painted
Import Domestic
Part Number List Price Part Number List Price
2" 26020T1P $146.50 26020T1S $158.00
21/2"26025T1P $153.50 26025T1S $168.00
3" 26030T1P $178.00 26030T1S $190.50
4" 26040T1P $232.50 26040T1S $248.00
5" ––26050T1S $384.00
6" 26060T1P $427.50 26060T1S $450.50
8" 26080T1P $804.00 26080T1S $846.00
All caps are cast fittings.
Technical Data Sheet: TFP1810
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 12
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod uct
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
#321 Domestic – Grooved Reducing Tee
Nom.
Size
Painted Galvanized
Domestic
Part Number List Price Domestic
Part Number List Price
2" x 1" 75410 $188.00 75470 $237.00
2" x 11/2"75411 $188.00 75471 $237.00
21/2" x 1" 75412 $188.00 –POA
21/2" x 11/4"75413 $188.00 73590 $237.00
21/2" x 11/2"75414 $188.00 73591 $237.00
21/2" x 2" 75415 $188.00 75472 $237.00
3" x 1" 75416 $188.00 –POA
3" x 11/2"75417 $188.00 73592 $237.00
3" x 2" 75418 $188.00 75473 $237.00
3" x 21/2"75419 $188.00 75474 $237.00
4" x 1" 75420 $224.00 –POA
4" x 11/2"75421 $224.00 73594 $280.00
4" x 2" 75422 $224.00 75475 $280.00
4" x 21/2"75423 $224.00 75476 $280.00
4" x 3" 75424 $224.00 75477 $280.00
5" x 2" 75425 $441.50 73595 $552.50
5" x 21/2"75426 $441.50 73596 $552.50
5" x 3" 75427 $441.50 75489 $552.50
5" x 4" 75428 $480.50 73597 $600.50
6" x 2" 75429 $528.50 75478 $665.50
6" x 21/2"75430 $528.50 75479 $665.50
6" x 3" 75431 $528.50 75480 $665.50
6" x 4" 75432 $528.50 75481 $665.50
6" x 5" 75433 $528.50 –POA
6" x 8" 75434 POA –POA
8" x 3" 75435 $763.50 75482 $961.50
8" x 4" 75436 $1,102.00 75483 $1,385.00
8" x 5" 75437 $1,102.00 75484 $1,385.00
8" x 6" 75438 $1,102.00 75485 $1,385.00
10" x 3" 75439 $1,240.00 73621 $1,550.00
10" x 4" 75440 $1,295.00 73622 $1,619.00
10" x 5" 75441 $1,325.00 73623 $1,656.00
10" x 6" 75442 $1,312.00 73624 $1,640.00
10" x 8" 75443 $1,348.00 73625 $1,686.00
12" x 6" 75444 $1,912.00 73629 $2,389.00
12" x 8" 75445 $1,967.00 73630 $2,458.00
12" x 10" 75446 $2,058.00 73631 $2,572.00
Tee is segmentally welded except where a * indicates it is available as a cast fitting.
Orders for items in shaded areas cannot be cancelled or returned.
Technical Data Sheet: TFP1810
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 13
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod ucts
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
#550 and #350 Domestic – Concentric Reducer
Nom.
Size
Painted Galvanized
Domestic
Part Number List Price Domestic
Part Number List Price
11/2" x 1" 74328 $68.75 73400 $82.75
11/2" x 11/4"72918 $68.75 5501513GS * POA
2" x 1/2"72850 $68.75 73392 $82.75
2" x 3/4"72851 $68.75 73401 $82.75
2" x 1" 72852 $68.75 73402 $82.75
2" x 11/4"72853 $73.25 73403 $87.50
2" x 11/2"72854 $73.25 73404 $87.50
21/2" x 1" 72855 $68.75 73393 $87.50
21/2" x 11/4"5502513S * $68.75 5502513GS * $87.50
21/2" x 11/2"5502515S * $68.75 5502515GS * $87.50
21/2" x 2" 5502520S * $68.75 5502520GS * $87.50
3" x 1" 72860 $76.00 73406 $91.75
3" x 11/4"72861 $76.00 73396 $91.75
3" x 11/2"5503015S * $79.25 5503015GS * $94.75
3" x 2" 5503020S * $83.25 5503020GS * $99.75
3" x 21/2"5503025S * $83.25 5503025GS * $99.75
4" x 1" 72867 $101.00 73409 $121.00
4" x 11/4"72868 $101.00 73756 $121.00
4" x 11/2"72869 $101.00 73410 $121.00
4" x 2" 5504020S * $101.00 5504020GS * $121.00
4" x 21/2"5504025S * $107.50 5504025GS * $129.50
4" x 3" 5504030S * $107.50 5504030GS * $129.50
4" x 31/2"72875 $107.50 73398 $129.50
5" x 2" 72876 $140.00 73399 $176.00
5" x 21/2"72877 $140.00 73758 $176.00
5" x 3" 5505030S * $140.00 5505030GS * $176.00
5" x 4" 5505040S * $140.00 5505040GS * $176.00
6" x 2" 5506020S * $186.50 5506020GS * $224.50
6" x 21/2"5506025S * $186.50 5506025GS * $224.50
6" x 3" 5506030S * $186.50 5506030GS * $224.50
6" x 4" 5506040S * $186.50 5506040GS * $224.50
6" x 5" 5506050S * $240.00 5506050GS * $289.00
8" x 3" 5508030S * $331.00 5508030GS * $399.00
8" x 4" 5508040S * $331.00 5508040GS * $399.00
8" x 5" 5508050S * $331.00 5508050GS * $399.00
8" x 6" 5508060S * $422.50 5508060GS * $508.50
10" x 4" 72889 $725.00 73764 $810.00
10" x 6" 5501060S * $792.50 73425 $951.00
10" x 8" 72891 $792.50 73422 $994.00
12" x 4" 5501240S * $877.50 73766 $1,148.00
12" x 6" 5501260S * $941.50 73767 $1,232.00
12" x 8" 5501280S * $1,328.00 73423 $1,736.00
12" x 10" 5501210S * $1,381.00 73424 $1,807.00
Reducer is segmentally welded except where a * indicates it is available as a cast fitting.
Orders for items in shaded areas cannot be cancelled or returned.
Technical Data Sheet: TFP1810
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 14
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod uct
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
#341 Domestic – Grooved x Flanged Adapter 150 Lbs. – Schedule 40
Nom.
Size
Painted Galvanized
Domestic
Part Number List Price Domestic
Part Number List Price
2" 73230 $236.50 73250 $295.50
21/2"73231 $280.00 73251 $349.50
3" 73232 $319.00 73252 $403.50
4" 73233 $491.50 73253 $620.50
5" 73234 $658.50 73254 $861.50
6" 73235 $658.50 73255 $861.50
8" 73236 $911.50 73256 $1,192.00
10" 73237 $1,493.00 74265 POA
12" 73238 $2,095.00 74254 POA
All adapters are segmentally welded.
Orders for items in shaded areas cannot be cancelled or returned.
Technical Data Sheet: TFP1810
#342 Domestic – Grooved x Flanged Adapter 300 Lbs. – Schedule 40
Nom.
Size
Painted Galvanized
Domestic
Part Number List Price Domestic
Part Number List Price
4" 73260 POA 73263 POA
5" 73261 POA 73264 POA
6" 73262 POA 74283 POA
All adapters are segmentally welded.
Orders for items in shaded areas cannot be cancelled or returned.
#320 Domestic – Grooved x Male Thread Tee, Painted
Nom.
Size
Domestic
Painted Part Number List Price
11/2"75490 $149.50
2" 75491 $149.50
21/2"75492 $149.50
3" 75493 $225.50
4" 75465 $320.50
6" 75466 $797.50
Adapter is segmentally welded.
Orders for items in shaded areas cannot be cancelled or returned.
Standpipe Domestic – Tee
Nom.
Size
Painted Galvanized
Domestic
Part Number List Price Domestic
Part Number List Price
4" x 4" x 21/2"76768 POA 76755 POA
6" x 6" x 21/2"76769 POA 76771 POA
Orders for items in shaded areas cannot be cancelled or returned.
#507/#50L Domestic – Bullhead Tee
Nom.
Size
Painted Galvanized
Domestic
Part Number List Price Domestic
Part Number List Price
5" x 5" x 8" 76772 POA 76774 POA
6" x 6" x 8" 76773 POA 76775 POA
Orders for items in shaded areas cannot be cancelled or returned.
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 15
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod ucts
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
#323 Domestic – Reducing Tee with Threaded Branch
Nom.
Size
Painted Galvanized
Domestic
Part Number List Price Domestic
Part Number List Price
2" x 1" 75500 $195.50 75520 $245.50
2" x 11/2"75501 $195.50 75522 $245.50
21/2" x 11/4"75502 $195.50 73608 $245.50
21/2" x 11/2"75503 $195.50 73609 $245.50
21/2" x 2" 75504 $195.50 73610 $245.50
3" x 1" 75505 $195.50 75521 $245.50
3" x 11/2"75506 $195.50 75546 $245.50
3" x 2" 75507 $195.50 75523 $245.50
3" x 21/2"75508 $226.50 73611 $355.50
4" x 1" 75509 $226.50 75524 $355.00
4" x 2" 75510 $226.50 75525 $355.50
4" x 21/2"75511 $226.50 73691 $355.50
4" x 3" 75512 $226.50 75526 $355.50
5" x 2" 75513 $466.50 75534 POA
6" x 2" 75514 $581.50 75527 $681.50
6" x 21/2"75590 $581.50 75528 $681.50
6" x 3" 75515 $581.50 75529 $681.50
6" x 4" 75516 $581.50 73694 $681.50
6" x 5" 75517 $581.50 73695 POA
8" x 2" 75518 $751.50 73696 POA
8" x 3" 75519 $751.50 73697 POA
All tees are segmentally welded.
Orders for items in shaded areas cannot be cancelled or returned.
#327 Domestic – Grooved Cross
Nom.
Size
Painted Galvanized
Domestic
Part Number List Price Domestic
Part Number List Price
2" 75840 $159.00 75849 $190.50
21/2"75841 $159.00 75850 $190.50
3" 75842 $284.50 75851 $346.50
4" 75843 $473.00 75852 $568.50
6" 75845 $1,202.00 75853 $1,509.00
8" 75846 $1,626.00 76757 $1,914.00
10" 75847 $2,479.00 76758 $3,116.00
12" 75848 $3,576.00 76759 $4,492.00
Cross is segmentally welded except where a * indicates it is available as a cast fitting.
Orders for items in shaded areas cannot be cancelled or returned.
Technical Data Sheet: TFP1810
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 16
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod uct
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
#372 Domestic – Reducer Small End Threaded (Male)
Nom.
Size
Painted Galvanized
Domestic
Part Number List Price Domestic
Part Number List Price
11/2" x 1" 76800 $75.00 76825 $92.50
2" x 3/4"76801 $75.00 76826 $92.50
2" x 1" 76802 $75.00 76827 $92.50
2" x 11/4"76815 $75.00 73794 POA
2" x 11/2"76803 $75.00 76828 $92.50
21/2" x 11/4"76816 $95.25 73795 POA
21/2" x 11/2"76817 $95.25 73796 POA
21/2" x 2" 76804 $95.25 76829 $118.00
3" x 1" 76805 $83.00 76830 $99.00
3" x 11/4"76818 $93.25 —POA
3" x 11/2"76819 $93.25 73797 POA
3" x 2" 76806 $93.25 76831 $111.50
3" x 21/2"76807 $112.00 76832 $133.00
4" x 1" 76808 $112.00 76833 $136.00
4" x 11/4"76820 $112.00 —POA
4" x 11/2"76821 $112.00 73799 POA
4" x 2" 76809 $112.00 76834 $136.00
4" x 21/2"76810 $112.00 76835 $136.00
4" x 3" 76811 $122.00 76836 $150.00
6" x 1" 76812 $217.00 76837 $267.00
6" x 2" 76813 $217.00 76838 $267.00
6" x 3" 76814 $217.00 76839 $267.00
All reducers are segmentally welded.
Orders for items in shaded areas cannot be cancelled or returned.
#391 Domestic – Groove x Male Thread Adapter Nipple
Nom.
Size
Painted Galvanized
Domestic
Part Number List Price Domestic
Part Number List Price
11/4" x 4" 75121 $42.50 74292 POA
11/2" x 4" 75122 $42.50 74293 POA
2" x 4" 75123 $42.50 74294 POA
21/2" x 4" 75124 $50.25 74295 POA
3" x 4" 75125 $61.25 74296 POA
3" x 6" 74335 $99.50 –POA
4" x 6" 75126 $101.50 74297 POA
5" x 6" 75129 $209.00 74298 POA
6" x 6" 75130 $269.50 74299 POA
8" x 6" 75131 $303.00 74336 POA
10" x 8" 75132 $440.50 74337 POA
12" x 8" 75133 $552.00 74338 POA
All adapter nipples are segmentally welded.
Orders for items in shaded areas cannot be cancelled or returned.
Technical Data Sheet: TFP1810
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 17
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod ucts
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
#392 Domestic – Groove x Groove Adapter Nipple
Nom.
Size
Painted Galvanized
Domestic
Part Number List Price Domestic
Part Number List Price
1" x 11/4"75098 $42.50 74304 POA
11/2" x 4" 75099 $42.50 74405 POA
2" x 4" 75100 $42.50 74406 POA
21/2" x 4" 75101 $50.25 74407 POA
3" x 4" 75102 $61.25 74408 POA
4" x 6" 75103 $101.50 74309 POA
5" x 6" 75104 $209.00 74310 POA
6" x 6" 75105 $269.50 74311 POA
8" x 6" 75106 $303.00 74312 POA
10" x 8" 75107 $440.50 74313 POA
12" x 8" 75108 $552.00 74314 POA
All adapter nipples are segmentally welded.
Orders for items in shaded areas cannot be cancelled or returned.
Technical Data Sheet: TFP1810
#393 Domestic – Groove x Plain Adapter Nipple
Nom.
Size
Painted Galvanized
Domestic
Part Number List Price Domestic
Part Number List Price
1" x 11/4"75148 $42.50 74316 POA
11/2" x 4" 74315 $42.50 74317 POA
2" x 4" 75150 $42.50 74318 POA
21/2" x 4" 75151 $50.25 74319 POA
3" x 4" 75152 $61.25 74330 POA
4" x 6" 75153 $101.50 74331 POA
5" x 6" 75158 $209.00 74322 POA
6" x 6" 75154 $269.50 74323 POA
8" x 6" 75155 $303.00 74324 POA
10" x 8" 75156 $440.50 74325 POA
12" x 8" 75157 $552.00 74326 POA
All adapter nipples are segmentally welded.
Orders for items in shaded areas cannot be cancelled or returned.
Technical Data Sheet: TFP1810
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 18
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod uct
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
#730 Domestic – Threaded Mechanical Tee
with Grade “E” EPDM Gasket Threaded Outlet
Nom.
Size
Painted Galvanized Gasket Only
Domestic
Part Number List Price Domestic
Part Number List Price Domestic
Part Number List Price
2" x 1/2"7302005ES $56.25 7302005EGS $74.50 730EGS-1 $9.85
2" x 3/4"73020075ES $56.25 73020075EGS $74.50 730EGS-1 $9.85
2" x 1" 7302010ES $56.25 7302010EGS $74.50 730EGS-1 $9.85
2" x 11/4"7302013ES $56.25 7302013EGS $74.50 730EGS-2 $12.75
2" x 11/2"7302015ES $56.25 7302015EGS $74.50 730EGS-2 $12.75
21/2" x 1/2"7302505ES $56.25 7302505EGS $74.50 730EGS-1 $9.85
21/2" x 3/4"73025075ES $56.25 73025075EGS $74.50 730EGS-1 $9.85
21/2" x 1" 7302510ES $56.25 7302510EGS $74.50 730EGS-1 $9.85
21/2" x 11/4"7302513ES $65.00 7302513EGS $94.75 730EGS-3 $12.75
21/2" x 11/2"7302515ES $59.25 7302515EGS $89.75 730EGS-3 $12.75
21/2" x 2" 7302520EP * $65.00 7302520EGP * $94.75 –POA
3" x 1/2"7303005ES $65.00 7303005EGS $85.00 730EGS-1 $9.85
3" x 3/4"73030075ES $65.00 73030075EGS $85.00 730EGS-1 $9.85
3" x 1" 7303010ES $65.00 7303010EGS $85.00 730EGS-1 $9.85
3" x 11/4"7303013ES $77.00 7303013EGS $100.50 730EGS-2 $12.75
3" x 11/2"7303015ES $77.00 7303015EGS $100.50 730EGS-3 $12.75
3" x 2" 7303020ES $80.50 7303020EGS $106.00 730EGS-4 $13.25
4" x 1/2"7304005ES $77.00 7304005EGS $100.50 730EGS-1 $9.85
4" x 3/4"73040075ES $77.00 73040075EGS $100.50 730EGS-1 $9.85
4" x 1" 7304010ES $77.00 7304010EGS $100.50 730EGS-1 $9.85
4" x 11/4"7304013ES $89.75 7304013EGS $117.00 730EGS-2 $12.75
4" x 11/2"7304015ES $89.75 7304015EGS $117.00 730EGS-3 $12.75
4" x 2" 7304020ES $89.75 7304020EGS $117.00 730EGS-4 $13.25
4" x 21/2"7304025ES $89.75 7304025EGS $123.50 730EGS-5 $14.75
4" x 3" 7304030ES $97.25 7304030EGS $132.50 730EGS-7 $15.50
5" x 11/2"7305015EP * $127.50 7305015EGP * $167.50 730EGS-3 $12.75
5" x 2" 7305020ES $127.50 7305020EGS $167.50 730EGS-4 $13.25
5" x 21/2"7305025ES $127.50 7305025EGS $167.50 730EGS-5 $14.75
5" x 3" 7305030EP * $136.50 7305030EGP * $179.00 –POA
6" x 11/4"7306013EP * $136.50 7306013EGP * $179.00 –POA
6" x 11/2"7306015ES $136.50 7306015EGS $179.00 730EGS-3 $12.75
6" x 2" 7306020ES $156.00 7306020EGS $204.00 730EGS-4 $13.25
6" x 21/2"7306025ES $190.00 7306025EGS $248.50 730EGS-6 $14.75
6" x 3" 7306030ES $199.00 7306030EGS $259.00 730EGS-8 $15.50
6" x 4" 7306040ES $212.50 7306040EGS $277.50 730EGS-9 $16.00
8" x 21/2"7308025ES $242.50 7308025EGS $318.00 730EGS-6 $14.75
8" x 3" 7308030ES $256.00 7308030EGS $318.00 730EGS-8 $15.50
8" x 4" 7308040ES $256.00 7308040EGS $318.00 730EGS-9 $16.00
Only available as inport.
Orders for items in shaded areas cannot be cancelled or returned.
Technical Data Sheet: TFP1860
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 19
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod ucts
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
#730 Domestic – Grooved Mechanical Tee
with Grade “E” EPDM Gasket Grooved Outlet
Nom.
Size
Painted Galvanized Gasket Only
Domestic
Part Number List Price Domestic
Part Number List Price Domestic
Part Number List Price
2" x 11/4"7302013ERS $63.50 7302013EGRS $80.50 730EGS-2 $12.75
2" x 11/2"7302015ERS $63.50 7302015EGRS $80.50 730EGS-2 $12.75
21/2" x 11/4"7302513ERS $63.50 7302513EGRS $85.00 730EGS-3 $12.75
21/2" x 11/2"7302515ERS $68.50 7302515EGRS $89.75 730EGS-3 $12.75
21/2" x 2" 7302520ERP $68.50 7302520EGRP $89.75 –POA
3" x 11/4"7303013ERS $76.75 7303013EGRS $100.50 730EGS-2 $12.75
3" x 11/2"7303015ERS $76.75 7303015EGRS $100.50 730EGS-3 $12.75
3" x 2" 7303020ERS $80.50 7303020EGRS $106.00 730EGS-4 $13.25
4" x 11/4"7304013ERS $89.75 7304013EGRS $117.00 730EGS-2 $12.75
4" x 11/2"7304015ERS $89.75 7304015EGRS $117.00 730EGS-3 $12.75
4" x 2" 7304020ERS $89.75 7304020EGRS $117.00 730EGS-4 $13.25
4" x 21/2"7304025ERS $90.50 7304025EGRS $123.50 730EGS-5 $14.75
4" x 3" 7304030ERS $97.50 7304030EGRS $132.50 730EGS-7 $15.50
5" x 11/2"7305015ERP $127.50 7305015EGS $167.50 730EGS-3 $12.75
5" x 2" 7305020ERS $127.50 7305020EGRS $167.50 730EGS-4 $13.25
5" x 21/2"7305025ERS $127.50 7305025EGRS $167.50 730EGS-5 $14.75
5" x 3" 7305030ERP $136.50 7305030EGRP $179.00 –POA
6" x 11/4"7306013ERP $136.50 7306013EGRP $179.00 –POA
6" x 11/2"7306015ERS $136.50 7306015EGRS $178.50 730EGS-3 $12.75
6" x 2" 7306020ERS $156.00 7306020EGRS $204.00 730EGS-4 $13.25
6" x 21/2"7306025ERS $190.00 7306025EGRS $248.50 730EGS-6 $14.75
6" x 3" 7306030ERS $199.00 7306030EGRS $259.00 730EGS-8 $15.50
6" x 4" 7306040ERS $212.50 7306040EGRS $277.50 730EGS-9 $16.00
8" x 21/2"7308025ERS $242.50 7308025EGRS $318.00 730EGS-6 $14.75
8" x 3" 7308030ERS $256.00 7308030EGRS $335.00 730EGS-8 $15.50
8" x 4" 7308040ERS $256.00 7308040EGRS $335.00 730EGS-9 $16.00
Orders for items in shaded areas cannot be cancelled or returned.
Technical Data Sheet: TFP1860
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 20
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod uct
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
#730 Domestic – Threaded Mechanical Cross
with Grade “E” EPDM Gasket Threaded Outlet
Nom.
Size
Painted Galvanized
Domestic
Part Number List Price Domestic
Part Number List Price
2" x 11/4"7302013ECS $97.75 7302013EGCS $128.50
2" x 11/2"7302015ECS $97.75 7302015EGCS $128.50
21/2" x 11/4"7302513ECS $102.00 7302513EGCS $134.00
21/2" x 11/2"7302515ECS $102.00 7302515EGCS $134.00
3" x 11/4"7303013ECS $120.00 7303013EGCS $157.50
3" x 11/2"7303015ECS $120.00 7303015EGCS $157.50
3" x 2" 7303020ECS $120.00 7303020EGCS $157.50
4" x 11/4"7304013ECS $140.50 7304013EGCS $183.00
4" x 11/2"7304015ECS $140.50 7304015EGCS $183.00
4" x 2" 7304020ECS $140.50 7304020EGCS $183.00
4" x 21/2"7304025ECS $156.00 7304025EGCS $204.00
4" x 3" 7304030ECS $162.00 7304030EGCS $212.00
5" x 2" 7305020ECS $181.50 7305020EGCS $237.50
5" x 21/2"7305025ECS $181.50 7305025EGCS $237.50
6" x 11/2"7306015ECS $183.50 7306015EGCS $239.50
6" x 2" 7306020ECS $190.50 7306020EGCS $249.50
6" x 21/2"7306025ECS $199.00 7306025EGCS $259.00
6" x 3" 7306030ECS $212.50 7306030EGCS $277.50
6" x 4" 7306040ECS $226.50 7306040EGCS $295.50
8" x 21/2"7308025ECS $252.00 7308025EGCS $329.00
8" x 3" 7308030ECS $274.50 7308030EGCS $358.50
8" x 4" 7308040ECS $274.50 7308040EGCS $358.50
Orders for items in shaded areas cannot be cancelled or returned.
Technical Data Sheet: TFP1860
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 21
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod ucts
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
#730 Domestic – Grooved Mechanical Cross
with Grade “E” EPDM Gasket Grooved Outlet
Nom.
Size
Painted Galvanized
Domestic
Part Number List Price Domestic
Part Number List Price
2" x 11/4"7302013ERCS $97.75 7302013EGRCS $128.50
2" x 11/2"7302015ERCS $97.75 7302015EGRCS $128.50
21/2" x 11/4"7302513ERCS $102.00 7302513EGRCS $134.00
21/2" x 11/2"7302515ERCS $102.00 7302515EGRCS $134.00
3" x 11/4"7303013ERCS $120.00 7303013EGRCS $157.50
3" x 11/2"7303015ERCS $120.00 7303015EGRCS $157.50
3" x 2" 7303020ERCS $120.00 7303020EGRCS $157.50
4" x 11/4"7304013ERCS $140.50 7304013EGRCS $183.00
4" x 11/2"7304015ERCS $140.50 7304015EGRCS $183.00
4" x 2" 7304020ERCS $140.50 7304020EGRCS $183.00
4" x 21/2"7304025ERCS $156.00 7304025EGRCS $204.00
4" x 3" 7304030ERCS $162.00 7304030EGRCS $212.00
5" x 2" 7305020ERCS $181.50 7305020EGRCS $237.50
5" x 21/2"7305025ERCS $181.50 7305025EGRCS $237.50
6" x 11/2"7306015ERCS $183.50 7306015EGRCS $239.50
6" x 2" 7306020ERCS $190.50 7306020EGRCS $249.50
6" x 21/2"7306025ERCS $199.00 7306025EGRCS $259.00
6" x 3" 7306030ERCS $212.50 7306030EGRCS $277.50
6" x 4" 7306040ERCS $226.50 7306040EGRCS $295.50
8" x 21/2"7308025ERCS $252.00 7308025EGRCS $329.00
8" x 3" 7308030ERCS $274.50 7308030EGRCS $358.50
8" x 4" 7308040ERCS $274.50 7308040EGRCS $358.50
Orders for items in shaded areas cannot be cancelled or returned.
Technical Data Sheet: TFP1860
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 22
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod uct
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
#40-5 Domestic – Strap
Nom.
Size
Domestic
Part Number with "E" Gasket List Price
11/4" x 1/2"STP1305ES $16.00
11/4" x 3/4"STP13075ES $16.00
11/4" x 1" STP1310ES $17.50
11/2" x 1/2"STP1505ES $17.50
11/2" x 3/4"STP15075ES $17.50
11/2" x 1" STP1510ES $17.50
2" x 1/2"STP2005ES $18.50
2" x 3/4"STP20075ES $18.50
2" x 1" STP2010ES $18.50
21/2" x 1/2"STP2505ES $21.00
21/2" x 3/4"STP25075ES $21.00
21/2" x 1" STP2510ES $21.00
ADACAP #750 Domestic
Nom.
Size
Domestic
Part Number List Price
11/2" x 1/2"7501505S $28.25
11/2" x 3/4"75015075S $28.25
11/2" x 1" 7501510S $28.25
2" x 1/2"7502005S $30.00
2" x 3/4"75020075S $30.00
2" x 1" 7502010S $30.25
21/2" x 1/2"7502505S $30.25
21/2" x 3/4"75025075S $30.25
21/2" x 1" 7502510S $32.50
Technical Data Sheet: TFP1810
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 23
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod ucts
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
#BFV-N Domestic – Grooved Butterfly Valves Fire Protection
Model BFV-N Grv x Grv, Gear Operated
with Tamper Switches – 300psi
Nom.
Size
Domestic
Part Number - UL,FM &ULC List Price
21/2"59-300-F-025N $666.50
3" 59-300-F-030N $717.00
4" 59-300-F-040N $750.00
5" 59-300-F-050N $1,608.00
6" 59-300-F-060N $998.00
8" 59-300-F-080N $1,611.00
10" 59-300-F-100N $2,415.00
Orders for items in shaded areas cannot be cancelled or returned.
Technical Data Sheet: TFP1510
#CV-1F Import – Grooved Check Valve
Nom.
Size
Import
Part Number List Price
2" 59-590-0-020 $374.50
21/2"59-590-0-025 $374.50
3" 59-590-0-030 $374.50
4" 59-590-0-040 $374.50
5" 59-590-0-050 $773.00
6" 59-590-0-060 $896.00
8" 59-590-0-080 $1,805.00
10" 59-590-0-100 $1,966.00
Technical Data Sheet: TFP1550
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 24
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod uct
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
Roll Grooving Machine Selection Chart
Machine
Type
Pace
Model
Size Range Drive Rolls Supplied Part
No.
List
Price **
Sch. 40 Sch. 10 Std. Wall Copper Size Steel Copper
Portable
with Electric
Motor
1112 1" – 12" – – 2" – 8" 11/2 HP, 110V 1" – 12" n41048 $8,655.50
1010 11/2" – 6" 11/2" – 12" – – 1/2 HP, 110V 11/2" – 12" n41030 $8,636.50
1023 11/4" – 12" – 12" – 24" 2" – 8" 11/2 HP, 110V
11/4" – 12" n41029 $12,800.50
2" – 12" n41250 $12,182.00
11/4" – 24" n41251 $14,260.00
2" – 24" n41252 $13,636.00
1021 11/4" – 12" – 12" – 24" 2" – 8" 2 HP, 220V
11/4" – 12" n41253 $12,800.50
2" – 12" n41254 $12,182.00
11/4" – 24" n41255 $14,260.00
2" – 24" n41256 $13,636.00
Portable
for
Rigid 300
1012 1" – 12" – – 2" – 8" Rigid 300 1" – 12" n41041 $4,803.50
1022 11/4" – 12" – 12" – 16" 2" – 8" Rigid 300 11/4" – 16" n41027 $10,812.50
1041 1" – 6" 1" – 12" – 2" – 8" Rigid 300 1" – 12" n41018 $3,364.00
Mini–Mites
1039 11/4" – 6" – – 2" – 8" Rigid 300,
Hand Crank 2" – 8" CTS n41017 $1,326.00
1034 11/4" – 6" – – – Rigid 300 11/4" – 6" IPS n41015 $1,256.50
1066 – – – 2" – 8" Rigid 300 2" – 8" CTS n41014 $1,256.50
Automated 2021 11/4" – 12" – 12" – 24" 2" – 8" 3 HP, 220V
11/4" – 12" n41257 $22,496.00
2" – 12" n41258 $21,878.50
11/4" – 24" n41032 $23,957.50
2" – 24" n41259 $23,275.00
2010 11/2" – 6" 11/2" – 12" – – 11/2 HP, 110V 11/2" – 12" n41031 $14,121.50
Portable
Cut Groover 1000 2" – 8" – – – 1 HP, 115V 2" – 8" 41260 $10,077.00
2" – 12" 2" – 12" 41261 $11,023.00
** Accessories not included, refer to Accessory Table Below.
Accessories
Item Pace
Model Size Range Capacity Part
No. List Price
Pipe Stands
4031 1" – 4" 600 Lbs. 41037 $514.00
4000 2" – 8" 900 Lbs. 41038 $635.00
4033 2" – 14" 1,200 Lbs. 41039 $795.00
4040 12" – 24" 4,000 Lbs. 41040 $2,017.00
Nipple Bracket 4037 Fits Model 1021 / 22 / 23 / 2021 – 41035 $642.50
4045 4" –12" Fits Model 1012 / 1112 – 41512 $534.50
Mounting Feet 4039 Fits Portable Roll Groovers and Model 1000 – 41034 $162.00
4046 PA Mounting Feet – 41013 $151.00
Porta-Bore 3013 Up to 41/4" Holes in pipe 11/4" – 12" – 41049 $2,653.00
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 25
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod ucts
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
Roll Selection Chart
Machine Pipe Size
Top
Size
Bottom
Parts Part
Number
List
Price
Part No. List
Price Part No. List
Price
1021,
1023,
2021
Sch. 40
11/4" – 11/2"41262 $360.00 11/4" – 11/2"41281 $261.00
2" – 31/2"41263 $314.00 2" – 31/2"41282 $242.00
4" – 6" 41264 $279.00 4" – 6" 41283 $366.00
8" – 12" 41265 $279.00 8" – 12" 41284 $437.00
Std. Wall 14" – 16" 41266 $262.00 14" – 16" 41285 $480.50
18" – 24" 41267 $262.00 18" – 24" 41286 $480.50
Copper Tube 2" – 8" 41268 $314.00 2" – 8" 41287 $242.00 Depth Gauge 4043 41509 $36.00
1010,
2010
Sch. 10,
Sch. 40 11/2" – 6"
41269 $262.00 11/2"41288 $242.00
–– 2" – 31/2"41289 $242.00
–– 4" – 6" 41290 $352.00
Sch. 10 8" – 12" 41270 $262.00 8" – 12" 41291 $352.00
1040,
2040
Sch. 40
1" – 11/2"41271 $215.00 1" – 11/2"41292 $215.00
1" – 6" 41272 $190.00 1" – 6" 41293 $180.00
2" – 6" 41273 $215.00 – ––
Sch. 10 8" – 12" 41274 $190.00 8" – 12" 41294 $297.00
Copper Tube 2" – 8" 41275 $191.50 2" – 8" 41295 $184.00 Depth Gauge 4021 41510 $36.00
1012,
1112,
2112
Sch. 40
1" – 11/2"41276 $215.00 1" – 11/2"41296 $215.00
2" – 6" 41277 $215.00 2" – 6" 41297 $180.00
8" – 12" 41278 $215.00 8" – 12" 41298 $299.50
Copper Tube 2" – 8" 41506 $215.00 2" – 8" 41507 $184.00 Depth Gauge 4021 41510 $36.00
1021,
1022,
1023,
2021
SS 10 Ga.
2" – 31/2"41299 $264.50
4" – 6" 41500 $403.00
8" – 12" 41501 $480.50
14" – 16" 41504 $528.00
18" – 24" 41505 $528.00
1040, 1041,
1112, 2112 SS 10 Ga.
2" – 6" 41502 $199.00
8" – 12" 41503 $356.00
1034,
1039
Sch. 40 11/4" – 6", w/ brg. 41279 $50.50 1034 Drive Shaft 11/4" – 6" 41511 $79.00
1039 Drive Shaft 11/4" – 6" 41513 $100.00
Depth Gauge 4021 41510 $36.00
1039 Copper Tube 2" – 8", w/ brg. 41280 $67.00 Depth Gauge 4021 41510 $36.00
1066 Copper Tube 2" – 8", w/ brg. 41508 $67.00 Drive Shaft 2" – 8" 41514 $79.00
Depth Gauge 4021 41510 $36.00
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 26
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod uct
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
Domestic Grooved Couplings – Packaging Quantity
(Including Std. and Pre-Lubricated Gaskets)
Nom.
Size
#577
Painted
#577 Galvanized &
#772 Tri-Seal
#705
Painted
#705
Galvanized & Tri-Seal
#71
Flange Adapter Size
Range
#716
Reducing Coupling
Pieces /
Carton
Pieces /
Crate
Pieces /
Carton
Pieces /
Crate
Pieces /
Carton
Pieces /
Crate
Pieces /
Carton
Pieces /
Crate
Pieces /
Carton
Pieces /
Crate
Pieces /
Carton
Pieces /
Crate
11/4"32 – 32 – 32 – 32 – – – 2" x 11/2"20 –
11/2"28 – 28 – 32 – 32 – – – 21/2" x 2" 36 –
2" – 385 24 – – 480 28 – – 210 3" x 2" 12 –
21/2"– 350 20 – – 350 20 – – 210 3" x 21/2"9 –
3" – 240 28 – – 270 35 – – 124 4" x 2" 6 –
4" – 150 20 – – 175 20 – – 124 4" x 21/2"6 –
5" – 100 – 100 – 96 – 96 – 30 4" x 3" 6 –
6" –80–80–80–80–305" x 4" – 80
8" –44–44–48–48–306" x 4" – 64
10" –24–24–24–24–246" x 5" – 64
12" –20–20–20–20–248" x 6" – 36
Domestic Grooved Fittings – Packaging Quantity
Nom.
Size
#510
90° Elbow
#501
45° Elbow
#519
Tee
#260
Cap Nom.
Size
Range
ADACAP #40-5
Strap
Pieces /
Carton
Pieces /
Crate
Pieces /
Carton
Pieces /
Crate
Pieces /
Carton
Pieces /
Crate
Pieces /
Carton
Pieces /
Crate
Pieces /
Carton
Pieces /
Crate
Pieces /
Carton
Pieces /
Crate
11/4"40 – 45 – 28 – 287 – 11/4" x 1/2"– – 45 –
11/2"27 – 39 – 28 – 210 – 11/4" x 3/4"– – 45 –
2" 18 – 24 – 24 – 140 – 11/4" x 1" – – 45 –
21/2"8 –15–10–84–11/2" x 1/2"50 – 45 –
3" 12–18–12–56–11/2" x 3/4"50 – 45 –
4" – 168 – 96 – 46 30 – 11/2" x 1" 50 – 45 –
5" – 105 – 140 – 75 – 392 2" x 1/2"50 – 45 –
6" – 63 – 90 – 48 – 288 2" x 3/4"50 – 45 –
8" – 28 – 48 – 24 – 160 2" x 1" 50 – 45 –
10" – 15 – – – – – 96 21/2" x 1/2"40 – 40 –
12" –8–––––6321/2" x 3/4"40 – 40 –
–––––––––21/2" x 1" 40 – 40
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 27
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod ucts
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
Domestic Grooved Fittings – Packaging Quantity
Nom.
Size
#510S
Short Pattern 90° Elbow
#519S
Short Pattern Tee Nom. Size
Range
#550
Concentric Reducer
Pieces/Carton Pieces/Crate Pieces/Carton
2" 18 30 21/2" x 11/4"36
21/2"8 20 21/2" x 11/2"36
3" 12 12 21/2" x 2" 36
4" 210 46 3" x 11/2"45
6" 78 48 3" x 2" 60
8" 28 24 3" x 21/2"30
–– – 4" x 2" 243
–– – 4" x 21/2"243
–– – 4" x 3" 243
–– – 5" x 3" 147
–– – 5" x 4" 147
–– – 6" x 2" 72
–– – 6" x 21/2"72
–– – 6" x 3" 72
–– – 6" x 4" 216
–– – 6" x 5" 216
–– – 8" x 3" 80
–– – 8" x 4" 80
–– – 8" x 5" 1
–– – 8" x 6" 1
Grooved Fittings – Pieces Per Carton/Case
Nom
Size
#730
Mechanical Tee
Nom
Size
#730
Mechanical Tee (cont.)
2" x 1/2"15 4" x 1/2"12
2" x 3/4"15 4" x 3/4"12
2" x 1" 15 4" x 1/2"12
2" x 11/4"26 4" x 11/4"12
2" x 11/2"12 4" x 11/2"12
21/2" x 1/2"14 4" x 2" 10
21/2" x 3/4"14 4" x 21/2"10
21/2" x 1" 14 4" x 3" 8
21/2" x 11/4"32 5" x 2" 8
21/2" x 11/2"20 5" x 21/2"8
3" x 1/2"16 6" x 11/2"8
3" x 3/4"16 6" x 2" 7
3" x 1" 16 6" x 21/2"7
3" x 11/4"18 6" x 3" 6
3" x 11/2"16 6" x 4" 6
3" x 2" 12 8" x 21/2"4
–– 8" x 3" 4
––8" x 4" 4
See latest catalog or technical data sheets for specific approvals, listings, and design parameters.
POA = Price on availability. Prices subject to change without notice.
18 – 28
Price Book - Section 18
GRINNELL Grooved Products
Section K
Misc.
Section J
Lubri cants
Section H
Hangers
Section F
Pipe & Accesso ries
Section D
Backflow
Section C
Valves & Hose Equip ment
Section 21
Electrical
Section 20
Miscellaneous
Section 19
CPVC Pipe & Fit tings
Section 18
Grooved Prod uct
Section 16
Specialty Items
Customer Service: (800) 558-5236
www.tyco-fire.com & www.grinnell.com
Effective Date
March 4, 2011
Import Grooved Couplings – Packaging Quantity
Nom.
Size
#577 #705
Pieces /
Carton
Cartons /
Pallet
Pieces /
Pallet
Crate
Qty
Pieces /
Carton
Pieces /
Crate
Pieces /
Carton
Pieces /
Crate
11/4"24 48 1,152 – 24 48 1,152 –
11/2"20 48 960 – 20 48 960 –
2" 16 48 768 – 16 48 768 –
21/2"12 48 576 – 12 48 576 –
3" – – – 819 – – – 520
4" – – – 546 – – – 324
6" – – – 252 – – – 165
8" – – – 108 – – – 80
Import Grooved Fittings – Packaging Quantity
Nom.
Size
#510
90° Elbow
#501
45° Elbow
#519
Tee
#260
Cap
Pieces /
Carton
Cartons /
Pallet
Pieces /
Pallet
Crate
Qty
Pieces /
Carton
Cartons /
Pallet
Pieces /
Pallet
Crate
Qty
Pieces /
Carton
Cartons /
Pallet
Pieces /
Pallet
Crate
Qty
Pieces /
Carton
Cartons /
Pallet
Pieces /
Pallet
Crate
Qty
11/4"28 48 1,344 – 54 48 2,592 – 22 48 1,056 – 132 48 6,336 –
11/2"24 48 1,152 – 40 48 1,920 – 18 48 864 – 100 48 4,800 –
2" 13 48 624 – 18 48 864 – 12 48 576 – 64 48 3,072 –
21/2"6 48 288 – 12 48 576 – 4 48 192 – 42 48 2,016 –
3" 4 48 192 – 8 48 384 – 3 48 144 – 24 48 1,152 –
4" – – – 195 – – – 315 – – – 120 12 48 576 –
6" – – – 68 – – – 100 – – – 42 3 48 144 –
8" – – – 32 – – – 44 – – – 18 3 48 144 –
10" – – – 16 – – – 18 – – – 10 – – – –
12" – – – 8 – – – 15 – – – – – – – –
Import Grooved Fittings – Packaging Quantity
Nom.
Size
#510S
Short Pattern 90° Elbow
#501
45° Elbow
#519S
Short Pattern Tee
Pieces /
Carton
Cartons /
Pallet
Pieces /
Pallet
Crate
Qty
Pieces /
Carton
Cartons /
Pallet
Pieces /
Pallet
Crate
Qty
Pieces /
Carton
Cartons /
Pallet
Pieces /
Pallet
Crate
Qty
2" 15 48 720 – 12 48 576 – 33 48 1,584 –
21/2"10 48 480 – 6 48 288 – 30 48 1,440 –
3" 8 48 288 – 4 48 192 – 24 48 1,152 –
4" – – – 234 – – – 150 10 48 480 –
6" – – – 72 – – – 56 3 48 144 –
8" – – – 33 – – – 21 2 48 96 –
WORLDWIDE HEADQUARTERS
Tyco Fire & Building Products
451 N. Cannon Avenue
Lansdale, PA 19446
Tel: 215-362-0700, 800-523-6512
Fax: 215-362-5385
www.Tyco-Fire.com
UNITED STATES
Central Sprinkler Company
451 N. Cannon Avenue
Lansdale, PA 19446
Tel: 215-362-0700, Fax: 215-362-5385
Brea, CA:
Tel: 714-993-6111, Fax 714-993-6043
Decatur, GA:
Tel: 404-243-7336, Fax 404-244-7375
Norristown, PA:
Tel: 610-239-9925, Fax 610-239-9936
Jessup, MD:
Tel: 301-604-7133, Fax 301-604-7138
Carol Stream, IL:
Tel: 630-871-7700, Fax 630-871-7464
Coppell, TX:
Tel: 972-745-0043, Fax 972-745-8594
Kent, WA:
Tel: 253-872-6030, Fax 253-872-6547
Avon, MA:
Tel: 508-583-8447, Fax 508-583-0034
Pompano Beach, FL:
Tel: 954-781-0866, Fax 954-781-1475
Murray UT:
Tel: 801-269-0688, Fax 801-269-0733
Tigard, OR:
Tel: 503-620-4203, Fax 503-620-3817
Parma, OH:
Tel: 216-265-0505, Fax 216-265-8354
Kansas City, MO:
Tel: 816-842-2424, Fax 816-842-4433
National Distribution Facility
PO Box 2806
Lubbock, TX 79408-2806
UNITED STATES (cont.)
Gem Sprinkler & Star Sprinkler
7071 S. 13th Street, Ste. 103
Oak Creek, WI 53154
Tel: 877-436-8926, Fax: 877-866-9250
CANADA
Regional Headquarters
12-16715 Yonge Street, Suite 316
Newmarket, Ontario L3X 1X4
Tel: 866-688-9707, 705-422-0010
Fax 705-422-1396
EUROPE & MIDDLE EAST
Regional Headquarters
Kopersteden 1, NL-7547 TJ Enschede
P.O. Box 198, 7500 AD
Enschede, The Netherlands
Tel: 31-53-428-4444, Fax: 31-53-428-3377
Stockport, UK:
Tel: 44-161-477-1886, Fax 44-161-477-6729
Paris Nord II, France:
Tel: 33-1-48-178-727 , Fax 33-1-48-178-720
Rodgau Germany:
Tel: 49-6106-84455, Fax 49-6106-18177
Coslada Madrid, Spain:
Tel: 34-1-669-3906, Fax 34-1-669-2018
Lørenskog, Norway:
Tel: 47-67-91-77-00, Fax 47-67-91-77-15
Lammhult, Sweden:
Tel: 46-472-269-980, Fax 46-472-269-989
Dublin, Ireland:
Tel: 353-166-839-82, Fax 353-166-822-54
Bolzano,Italy:
Tel: 39-0471-252-091, Fax 39-0471-254-058
Milano, Italy:
Tel: 39-0293-548-736, Fax 39-0293-548-690
Dubai, United Arab Emirates:
Tel: 971-488-38689, Fax 971-488-38674
Budapest, Hungary:
Tel: 36-148-11-383, Fax 36-120-34-427
Wels/Thalheim, Austria:
Tel: 43-072-42-65-054, Fax 43-072-42-74-393
LATIN AMERICA
Regional Headquarters
South America, Central America & Caribbean
1802 S.W. 2nd St.
Pompano Beach, FL 33069
Tel: 954-781-0866, Fax 954-781-9330
Regional Headquarters - Mexico
Hamburgo 231A Piso 2
Colonia Juarez
Mexico, D.F. 06600 Mexico
Tel: 525-55-2075766, Fax: 525-55-2077566
ASIA
Regional Headquarters
No.45 Tuas Avenue 9,
Singapore 639189
Central Sprinkler Company
Singapore:
Tel: 65- 6743-3212, Fax 65-6743-9181
Shanghai, China:
Tel: 86-21-5868-3300, Fax 86-21-5868-1160
Beijing, China:
Tel: 86-10-6515-6191, Fax 86-10-6515-6157
Chengdu, China:
Tel: 86-28-689-9440, Fax 86-28-666-2538
Gem Sprinkler Company & Star Sprinkler Inc.
Singapore:
Tel: 65-6861-1655, Fax 65-6861-1312
Kuala Lumpur, Malaysia:
Tel: 60-3-8024-6773, Fax 60-3-8024-2180
Hong Kong:
Tel: 852-2595-0686, Fax 852-2505-5826
Distributed by:
www.tyco-fire.com
#548 / Printed in USA / 3.11 / © 2011
