Spec 115 Vented Cylinders
User Manual: Spec 115 Vented Cylinders
Open the PDF directly: View PDF 
.
Page Count: 24
| Download | |
| Open PDF In Browser | View PDF |
Vented Cylinder Range Standard cylinders manufactured from either copper or stainless steel S U P P L I E R S T O T H E M E R C H A N T T R A D E F O R O V E R 4 0 Y E A R S Cylinder Range Customer Satisfaction In answer to the demands of customers for a quick response to quotations and deliveries, we have specifically tailored our nationwide network of Super-Depot manufacturing units to the production of copper cylinders and tanks, enabling us to offer the unique benefits of no minimum order quantity and minimal delivery charges for ‘one-offs’ To ensure a consistently high standard of copper cylinder, whichever nationwide depot that cylinder is manufactured in, Gledhill now have a dedicated training facility at the Blackpool headquarters. Here, new staff are trained in all aspects of copper brazing and forming as well as being given the technical theory behind copper cylinder manufacture. Gledhill provide standard and ‘special’ cylinders to the merchant trade. The standard range are manufactured from both stainless steel and copper. Our copper range includes cylinders and combination units for all traditional domestic applications; commercial and industrial cylinders and calorifiers; packaged plumbing units, products for use with off peak electricity and thermal stores suitable for use with all types of alternative energy. 2 the complete bespoke cylinder service Ordering your bespoke designed cylinder couldn’t be simpler; • • • • • Place your order, with all the requirements at the merchant Receive confirmation of the price within one hour The cylinder is manufactured within one of our nationwide depots Same day collection available from the depot* Next day delivery to any mainland UK address at no extra cost * The same day collection and next day delivery service is subject to orders placed before 1pm PLACE YOUR ORDER MANUFACTURED LOCALLY DELIVERED NEXT DAY 3 For many years, Gledhill have been well known in the range of installations; either matching the exact specification industry for our capability to produce copper cylinders to of an old domestic cylinder that needs replacing to creating custom specifications, ie tapping heights, connection sizes a horizontal boiler to fit into the confined space of an attic. and positions etc. Cylinder sizes can range from a 45-litre cylinder for use on The versatility of copper makes it the perfect choice of pleasure boats, to a 960-litre industrial-sized model for use material to produce bespoke, tailor-made cylinders that can in commercial premises. be manufactured locally in a fast turnaround time. This has led to high demand, particularly for bespoke orders and These cylinders are all manufactured in compliance one-off specials, that can be custom-made in just a matter with BS1566 and comply with 2010 Part L1B Building of hours. Regulations Replacement Cylinder requirements. The buoyant demand for copper specials, manufactured through the Gledhill Rapide service, comes from a wide Storage Capacities Direct Cylinder Capacities Shown In Litres (Reduce by 2.5% for indirect models) Height Diameter mm Inches 300mm (12”) 350mm (14”) 375mm (15”) 400mm (16”) 450mm (18”) 500mm (20”) 600 24 35 48 55 60 77 - 675 27 40 55 62 70 86 - 750 30 45 62 70 80 98 - 825 33 50 69 78 89 109 - 900 36 55 74 87 96 120 136 975 39 60 83 95 107 135 147 1050 42 65 90 103 115 144 158 1200 48 75 103 118 134 166 190 1350 54 - - - - - 227 1500 59 - 130 148 170 218 245 1800 71 118 164 180 206 277 318 A range of sizes from the table above are also available manufactured from stainless steel, please see page 4 for further details. Other sizes are available, please contact your local manufacturing depot for further details. Standard Combination Cylinder Capacities Capacity Height (mm) Diameter (mm) Hot (litres) Cold (litres) 750 450 60 20 900 450 85 20 1075 450 115 20 1200 450 120 40 1400 450 145 40 1500 450 166 40 1850 450 210 40 1200 500 145 45 1500 450 166 40 4 Other Considerations What else do you need to consider when ordering a Gledhill cylinder? Grades of cylinder There are three ‘Grades’ of vented cylinder G1, G2, G3 all are built to the same manufacturing standard, the principle difference between the three grades is the gauge of the copper sheet used. To determine the grade required of the cylinder. This measurement is known as the ‘working head’ and determines the grade of cylinder to be used. Gravity coil When ordering your Gledhill cylinder, you would need to specify if it requires a gravity coil. This is where the circulation of the hot water circulation is attained by using 10 metres feed and expansion) tank serving the cylinder and the base 15 metres 25 metres measure the distance from the waterline in the header (or the natural convection current rather than by the use of a circulation pump to ‘force’ the water around the system. The main difference in the cylinder design between a pumped and gravity circulation system is that the connections/coils are larger in the gravity systems to Grade 1 provide less resistance and increase the flow rate. (up to 2.5 bar) Grade 2 (up to 1.5 bar) Grade 3 (up to 1.0 bar) Additional Components Available At Time Of Order Extras Code Description Extras Code Description EX001 Compression fittings per 4 EX021 50 ltr copper F&E tank (high temperature) EX002 Shower take off EX022 XC010 - cylinder stat EX003 Extra tapping added EX023 XC007 - Brawa mixer valve EX004 Drain cock added EX024 XB435 - Thermometer EX005 60mm Rockwool added EX025 Torrent immersion and stat EX006 Immersion heater EX026 Titanium Immersions EX007 Next day delivery EX027 1¼" Tappings EX008 High recovery coil EX028 1½" Tappings EX009 Gravity coil EX029 2" Tappings EX010 Horizontal pattern EX030 SP coil for 210 TEC EX011 Cradles supplied EX031 SP coil for 250 TEC EX012 Same day delivery EX032 SP coil for 350 & 450 coil EX013 Part 2 Ball valve & Float EX033 XC011 - Overheat stat EX016 Stretched coil EX034 2nd PHE & control Panel EX017 opposite side coil (flow & return) EX035 Solid fuel tappings x 2 EX018 Showercyl coil EX038 70 Ltr Copper F&E tank (high temperature) EX019 20 ltr copper F&E tank (high temperature) EX040 30 Ltr Copper F&E tank (high temperature) EX020 40 ltr copper F&E tank (high temperature) EX046 95 Ltr Copper F&E tank (high temperature) 5 EnviroFoam Stainless Stainless steel vented cylinder, the true replacement for your copper cylinder Manufactured to comply with the HWA standard for stainless steel vented cylinders, these cylinders also have • 2010 Part L1b compliant strong environmental credentials including; • industry leading 35mm HCFC free insulation • Compression fittings • exceptionally low standing heat loss, in anticipation of EUP regulations • Tapping positions to BS1566 specifications • insulation incorporates Polyol which is derived from Rapeseed oil - a fully renewable resource, with an industry leading Global Warming Potential of 0.7 • 10 year warranty • with a Duplex stainless steel internal cylinder, the product is fully recyclable at the end of its working life • Duplex stainless steel With the open vented stainless steel cylinder, you will also benefit from; • Power shower take-off/secondary return on most models as standard • next day lead time availability • BS1566 and 2010 Part L1B compliant • Easy access to immersion heater boss • 100% Recyclable • 400mm diameter models have 22mm compressions • 450mm x 900mm model has 22mm compressions • Next day delivery available • Remaining 450mm diameter models have 22mm compressions on coil and 28mm on cold feed and hot water draw off. Indirect Specifications Gledhill Code BS 1566 ref Cylinder height (mm) Cylinder diameter (mm) Capacity (litres) SE36X18IND 7 900 450 117 SE42X18IND 8 1050 450 140 SE48X18IND 9 1200 450 162 SE36X16IND 2 900 400 94 SE42X16IND 3 1050 400 112 Direct Specifications SE36X18DIR 7 900 450 120 6 EnviroFoam Copper Copper vented indirect cylinder for use with a conventional boiler Manufactured to BS1566 and 2010 Part L1B compliant, these cylinders have strong environmental credentials • 2010 Part L1b compliant including; • industry leading 35mm HCFC free insulation • Compression fittings • exceptionally low standing heat loss, in anticipation of EUP regulations • 10 year warranty • insulation incorporates Polyol which is derived from Rapeseed oil - a fully renewable resource, with an • Low standing heat loss industry leading Global Warming Potential of 0.7 • with a copper internal cylinder, the product is fully • 100% recyclable recyclable at the end of its working life • manufactured at 9 locations in the UK, the cylinders have • Next day delivery available a lower carbon footprint derived from transportation than is typical in the industry • Secondary return is an optional extra available on larger models As well as being the most attractive open vented copper cylinder available on the market, you will also benefit from; • next day lead time availability • compression fittings available • 25 minute recovery time • BS1566 and 2010 Part L1B compliant • Easy access to immersion heater boss Gledhill Code BS 1566 ref Cylinder height (mm) Cylinder diameter (mm) Capacity (litres) BIND15 2 900 400 94 BIND16 3 1050 400 112 BIND19 4 675 450 84 BIND20 5 750 450 95 BIND21 6 825 450 106 BIND22 7 900 450 117 BIND23 8 1050 450 140 BIND24 9 1200 450 162 BIND25 9E 1500 450 213 BIND27 10 1200 500 185 BIND29 11 1500 500 239 BIND31 12 1200 600 280 BIND32 13 1500 600 360 BIND33 14 1800 600 440 The extra components available with this product are: EX001, EX002, EX004, EX006, EX007, EX009, EX010, EX011, EX012, EX016, EX017 For the full description, please refer to the table on page 5. 7 High Recovery Coils Available for use in copper cylinders The EnviroFoam Copper cylinders are also available with a special high performance heat exchanger, on request, which • 2010 part L1b compliant reduces boiler cycling and maximises the time the boiler can operate in condensing mode. These were previously known as our CondenCyl range. • High recovery The special coil enables recovery in only 14 minutes which • Energy saving conforms to CHESS best practice. The reduction in boiler • For use with fully pumped systems cycling and faster recovery time combine to reduce the cost of producing hot water. • Perfectly matched with condensing boilers The high efficiency coil and its ability to heat only the water you require means that a smaller capacity cylinder can be used. For example, a typical 120 litre cylinder to meet Part • 100% Recyclable L1B requirements would reduce to 80 litres using a high recovery coil. • Next day delivery available Utilising the EnviroFoam insulation reduces standing losses – particularly beneficial during summer months. Sizes shown below are indicitave. Please quote standard codes and specify high recovery coils at the time of order. Gledhill Code Cylinder height (mm) Cylinder diameter (mm) Capacity (litres) BIND13 750 400 77 BIND15 900 400 94 BIND16 1050 400 112 BIND22 900 450 117 BIND23 1050 450 140 The extra components available with this product are: EX001, EX002, EX004, EX006, EX007, EX008, EX012, EX017 For the full description, please refer to the table on page 5. 8 Super Recovery Cylinders For use where rapid recovery of the cylinder contents is required The quick recovery cylinder has a special high performance heat exchanger which reduces boiler cycling and maximises • 2010 Part L1b compliant the time the boiler can operate in condensing mode. • Compression fittings Its special coil enables recovery in as little as 5 minutes, assuming a correctly sized boiler is installed. • 10 year warranty The reduction in boiler cycling and faster recovery time combine to reduce the cost of producing hot water. • Recovery from 5 minutes The super recovery cylinders’ high efficiency coil and its • Recovers as it is being used ability to heat only the water you require means that a smaller • For use with fully pumped systems capacity cylinder can be used. This makes it the ideal replacement choice where space is an issue but rapid reheat times are still required. • 100% Recyclable The cylinders 35mm of high insulation EnviroFoam further • Next day delivery available reduces standing losses – particularly beneficial during summer months. Super Recovery Specifications Gledhill Code BIHR045 BIHR080 BIHR120 Cylinder Size (mm) 600 x 350 750 x 400 900 x 450 Cylinder Capacity (litres) 45 80 120 9kW 11.9 21.1 31.7 12kW 8.9 15.8 23.8 15kW 7.1 12.7 19.0 24kW 4.6 8.2 11.9 30kW 3.9 6.9 9.5 Recovery time in minutes to raise temp. by 40°C for different boiler outputs The extra components available with this product are: EX002, EX004, EX006, EX007, EX012, EX017 For the full description, please refer to the table on page 5. 9 EnviroFoam Copper Copper vented direct cylinder Manufactured to BS1566 and 2010 Part L1B compliant, these cylinders have strong environmental credentials • 2010 part L1b compliant including; • industry leading 35mm HCFC free insulation • Compression fittings available • exceptionally low standing heat loss, in anticipation of EUP regulations • 10 year warranty • insulation incorporates Polyol which is derived from Rapeseed oil - a fully renewable resource, with an • Low standing heat loss industry leading Global Warming Potential of 0.7 • with a copper internal cylinder, the product is fully • 100% recyclable recyclable at the end of its working life • manufactured at 9 locations in the UK, the cylinders have • Next day delivery available a lower carbon footprint derived from transportation than is typical in the industry As well as being the most attractive open vented copper cylinder available on the market, you will also benefit from; • next day lead time availability • compression fittings available • BS1566 and 2010 Part L1B compliant • Easy access to immersion heater boss Gledhill Code BS 1566 ref Cylinder height (mm) Cylinder diameter (mm) Capacity (litres) BDIR14 2 900 400 96 BDIR15 3 1050 400 115 BDIR17 4 675 450 86 BDIR18 5 750 450 98 BDIR19 6 825 450 109 BDIR20 7 900 450 120 BDIR21 8 1050 450 144 BDIR22 9 1200 450 166 BDIR23 9E 1500 450 218 BDIR25 10 1200 500 190 BDIR27 11 1500 500 245 BDIR29 12 1200 600 290 BDIR30 13 1500 600 370 BDIR31 14 1800 600 450 The extra components available with this product are: EX001, EX002, EX004, EX006, EX007, EX010, EX011, EX012 For the full description, please refer to the table on page 5. 10 Combination Units Both direct and indirect configurations The combination cylinder is specifically designed to be installed into properties without a loft space ie apartments etc. With the feed tank being incorporated into the combination unit, a separate cold water storage tank is not required, therefore installation is simplified and costs reduced. With the combination unit, also you will also benefit from; • next day lead time availability • compression fittings available • high recovery coil available • electric only direct units • indirect units for use with central heating systems • BS1566 and 2010 Part L1B compliant Direct specifications Gledhill Code Cylinder height (mm) Cylinder diameter (mm) Capacity hot (litres) Capacity cold (litres) BDCOM01 900 400 65 15 BDCOM02 1050 400 85 20 BDCOM03 900 450 85 20 BDCOM04 1050 450 115 20 BDCOM05 1200 450 115 40 BDCOM06 1400 450 144 40 BDCOM07 1500 450 166 40 BDCOM08 1800 450 210 40 Indirect specifications Gledhill Code Cylinder height (mm) Cylinder diameter (mm) Capacity hot (litres) Capacity cold (litres) BICOM01 900 400 65 15 BICOM02 1050 400 85 20 BICOM03 900 450 85 20 BICOM04 1050 450 115 20 BICOM05 1200 450 115 40 BICOM06 1400 450 144 40 BICOM07 1500 450 166 40 BICOM08 1800 450 210 40 The extra components available with this product are: EX001, EX002, EX004, EX006, EX007, EX008, EX009, EX012, EX013, EX016, EX017, EX018 For the full description, please refer to the table on page 5. 11 Economy 7 Combination For use with electric off-peak tariffs The Economy 7 range of domestic hot water combination cylinders have been designed to maximise the heating potential electric off-peak tariffs. The combination cylinder is specifically designed to be installed into properties without a loft space ie apartments etc. With the feed tank being incorporated into the combination unit, a separate cold water storage tank is not required, therefore installation is simplified and costs reduced. These cylinders are available in both direct and indirect patterns. These cylinders also have other benefits including; • 2010 part L1b compliant • compression fittings available • 10 year warranty • low standing heat loss • next day lead time availability • Utilises either Economy 7 or Economy 10 electric tariffs Direct specifications Gledhill Code Cylinder height (mm) Cylinder diameter (mm) Capacity hot (litres) Capacity cold (litres) BEDCT01 1200 450 120 40 BEDCT02 1400 450 144 40 BEDCT03 1500 450 166 40 BEDCT04 1800 450 210 40 Gledhill Code Cylinder height (mm) Cylinder diameter (mm) Capacity hot (litres) Capacity cold (litres) BEICT01 900 400 65 15 Indirect specifications BEICT02 900 450 85 20 BEICT03 1050 400 86 20 BEICT04 1050 450 115 20 BEICT05 1200 400 110 20 BEICT06 1200 450 120 40 BEICT07 1500 400 140 25 BEICT08 1500 450 166 40 BEICT10 1800 450 210 40 The extra components available with this product are: EX001, EX002, EX004, EX006, EX007, EX012, EX013, EX018 For the full description, please refer to the table on page 5. 12 Economy 7 Cylinders For use with electric off-peak tariffs The Economy 7 range of domestic hot water cylinders have been designed to maximise the heating potential electric off-peak tariffs. Manufactured to BS1566 and 2010 Part L1B compliant, these cylinders have strong environmental credentials including; • industry leading 35mm HCFC free insulation • exceptionally low standing heat loss, in anticipation of EUP regulations • insulation incorporates Polyol which is derived from Rapeseed oil - a fully renewable resource, with an industry leading Global Warming Potential of 0.7 • with a copper internal cylinder, the product is fully recyclable at the end of its working life • next day lead time availability • compression fittings available • 100% recyclable Direct specifications Gledhill Code Cylinder height (mm) Cylinder diameter (mm) Capacity (litres) BEDC01 1050 400 116 BEDC02 900 450 120 BEDC03 1050 450 144 BEDC04 1200 450 166 BEDC05 1500 450 210 Indirect specifications Gledhill Code Cylinder height (mm) Cylinder diameter (mm) Capacity (litres) BEICY01 1050 400 114 BEICY02 900 450 117 BEICY03 1050 450 140 BEICY04 1200 450 162 BEICY05 1500 450 206 The extra components available with this product are: EX001, EX002, EX004, EX006, EX007, EX008, EX009, EX012, EX013, EX018 For the full description, please refer to the table on page 5. 13 Rectangular Tanks Direct and indirect rectangular combination tanks The combination tanks are supplied in direct and indirect configurations. Both types of unit provide gravity hot water and can be installed at high level in a cupboard or in a roof space. The indirect model can also be used on pumped and sealed systems. There are three standard capacities shown in the table below, but other bespoke sizes are available. The direct model is designed for use with all off-peak tariffs, the thermal properties of the HCFC free insulation ensure low energy costs to the consumer. The Direct Combination Tank ensures a fast, simple installation that will save money, time and materials, and can be supplied with two three-kilowatt immersion heaters and thermostats factory-fitted to make installation even quicker. Even with future changes to the heating installation the Indirect Combination Tank would not require to be replaced. For example, should the heating system be changed from open vented to a sealed primary circuit it can be adapted by simply Figure 1 blanking off the primary cold feed and primary vent connections. Figure 1 shows a hot water store designed for use with electric. Figure 2 shows a hot water store designed to be used with a sealed system or it can be used with a separate F&E tank for a fully pumped system. Please note separate cold tanks are also available on request. Direct Specifications Gledhill Code Capacity (litres) Height (mm) Width (mm) Depth (mm) BDRCT115 115 1040 410 535 BDRCT135 135 1040 460 535 BDRCT160 160 1260 400 535 Gledhill Code Capacity (litres) Height (mm) Width (mm) Depth (mm) BIRCT115 115 840 535 540 BIRCT135 135 840 535 570 BIRCT160 160 840 535 660 Figure 2 Indirect Specifications 14 Seagull Packaged plumbed units A fully packaged plumbing unit, the cold water supply tank, the primary feed and expansion tank and the domestic hot water storage tank are all fully packaged in rectangular or circular formats. The minimum of installation time is required because the time wasted in making connections between remote sited tanks and the hot water storage tank has been completely removed. Specified by local authorities and leading architects and consultants, the Seagull packaged plumbing units are designed to make the maximum use of available space. The rectangular version is particularly suitable for use in restricted areas and in roof areas where headroom is limited. Circular patterns and separate cold tanks are also available. When using with a pumped heating system, ensure the cold feed and open vent connections comply with best practice. Figure 3 shows a unit to be used with a gravity primary or Figure 3 for replacing an old gravity system with a pumped system. Two pumps will be needed. Speak to the Gledhill technical department for guidance. Figure 4 shows a unit to be used as figure 3, but the only difference is that these units are circular. Although a small selection of units are shown below, other sizes and positions of tappings can be specified at the time of order and compression fittings can be requested. Rectangular Tank Hot Capacity / Dimensions Gledhill Code Capacity (litres) Length (mm) Depth (mm) Height (mm) BSRCT115 114 615 465 915 BSRCT135 136 615 465 1030 BSRCT160 160 615 465 1130 Circular Tank Hot Capacity / Dimensions Capacity (litres) Height (mm) Diameter (mm) 0BSCT00006 114 1270 450 0BSCT00007 136 1270 500 0BSCT00010 180 1470 500 Figure 4 Gledhill Code 15 SunSpeed Domestic hot water copper cylinder for use with solar energy SunSpeed is a domestic hot water cylinder designed for The SunSpeed is an open vented cylinder which makes the use with solar panels, with cylinder capacities ranging location of the cylinder more flexible because the cylinder from 120 to 332 litres. It is a copper cylinder with two heat does not require a safety discharge pipe and makes it exchangers, one for solar input and one for a boiler input. inherently safe. The dedicated solar volumes range from 34% to 51% The SunSpeed cylinders are insulated using 35mm HCFC with the majority exceeding 40% enabling the best use free EnviroFoam to comply with Part L of the Building of the solar panels. These dedicated solar volumes allow Regulations. This insulation incorporates Polyol which is maximum suitable solar panels surface area from 2.7m2 to derived from Rapeseed oil - a fully renewable resource, with 6.7m . The surface area of the solar heat exchanger coil is an industry leading Global Warming Potential of 0.7. It also designed to exceed Building Regulations requirements. provides exceptionally low standing heat loss. The boiler coil comes into play in the cooler months of the Please note other sizes other than the ones shown in the year as the solar input diminishes. A correctly sized cylinder table below are available, please enquire with the local will ensure enough hot water is available to the householder manufacturing depot. 2 during these months as the dedicated solar volume will not be heated by the boiler. The boiler coil is sized appropriate to the cylinder and gives a recovery time of less than 26 minutes with sizes to meet all regulations. Specification Gledhill Code Nominal overall capacity (litres) Cylinder size (mm) Dedicated solar volume (litres) Surface area of solar coil (m2) BSUN201 120 1050 x 400 41 0.29 BSUN202 138 1200 x 400 55 0.29 BSUN203 150 1300 x 400 61 0.29 BSUN204 163 1400 x 400 66 0.29 BSUN205 175 1500 x 400 78 0.43 BSUN207 150 1050 x 450 60 0.29 BSUN208 174 1200 x 450 77 0.36 BSUN209 190 1300 x 450 84 0.36 BSUN210 206 1400 x 450 92 0.43 BSUN211 222 1500 x 450 109 0.50 BSUN212 269 1800 x 450 132 0.65 BSUN213 332 1800 x 500 170 0.72 16 Torrent ECO Cylinders Thermal stores providing both heating and mains pressure hot water A thermal store provides the perfect solution to a homes The Torrent ECO is manufactured from copper, by our heating and hot water requirements. Torrent ECO offers trained coppersmiths, within Gledhill’s nine nationwide more options than any other store or cylinder, and is manufacturing depots. designed to reduce heating costs by offering complete flexibility for householders to use multiple energy sources. This provides the flexibility to specifically design the thermal store to suit their own requirements, allowing the The Torrent ECO enables the hot water within the store homeowner to maximise the available heat sources, whether to circulate around the heating system to provide heat they are traditional boilers or electric immersions, or the to the property, with the domestic hot water being mains growing popularity of alternative energy fuel sources. cold water instantaneously heated through a plate heat Energy source compatibility exchanger. Thermal stores provide many additional benefits including: • Provides mains pressure hot water • No annual maintenance or safety check requirement • No discharge pipework • No risk of legionella • Inherently safe being an open vented cylinder • No G3 qualification requirement for installation Gas /Oil Boiler Immersion Heater Solid Fuel Boiler Heat Pump Open vented or sealed primary boilers Electricity from either mains or solar PV Wood burning or solid fuel boilers Air source or ground source heat pumps Solar Thermal Solar thermal The cylinder is open vented, enabling uncontrolled heat sources such as woodburning stoves to be used. Legionella and scald protection The domestic hot water is generated by mains cold water being instantaneously heated as it passes through the heat exchanger, which is then delivered to the taps. This method of generating the hot water completely removes the risk of legionella. Gledhill’s patented intelligent controls, in conjunction with the sensors, regulates the temperatures being delivered to the taps or shower, preventing the risk of scalding. For more information on the Torrent ECO range, and the options available, please refer to the separate brochure. 17 Twin Coiled Cylinder For use with two heat sources ie. solid fuel and conventional boiler The twin coil cylinders are designed to be used with two heat sources, including uncontrolled heat sources such as solid fuel (Aga) alongside a conventional gas or electric boiler. To boost the efficiency, an optional high recovery coil is available. The cylinders are available in all three grades, which needs to be specified at the time of ordering, and are available in bespoke size and specifications. All the cylinders are 2010 part L1B compliant and come with a 10 year warranty. Compression fittings are available on these cylinders, but will need to be specified when ordering. Sizes shown below are indicitave. Please quote standard codes and specify stacked or interlocked coil configuration at the time of order. Twin Coil Specification Gledhill Code Cylinder height (mm) Cylinder diameter (mm) BTCI001 900 450 BTCI002 1050 450 BTCI003 1200 450 BTCI004 1500 450 BTCI005 1800 450 BTCI006 900 400 BTCI007 1050 400 BTCI008 1200 400 BTCI009 1500 400 500 BTCI010 1500 BTCI011 1400 450 BTCI012 1700 450 BTCI013 1350 450 BTCI014 1600 450 *BTCI015 1200 450 *BTCI016 1200 500 *BTCI017 1300 450 * These models are combination tanks 18 Horizontal Cylinder For use where installation location height is restricted Where the height of a room restricts the installation of a standard cylinder, then a horizontal cylinder may well be the • 2010 part L1b compliant answer. These are particularly suited to confined loft spaces and are available either as direct or indirect, which can also • Suitable for gravity or pumped systems be supplied with support cradles. These units provide a highly effective and efficient means • 10 year warranty of providing and storing hot water where headroom is at a premium. • Available with twin coil A twin coil configuration can be specified when ordering, to • 100% recyclable utilise solar power or a solid fuel boiler in conjunction with a conventional boiler. • Compression fittings available 19 Commercial Cylinders Cylinders and calorifiers for commercial and industrial uses Gledhill manufacture a complete range of cylinders and calorifiers for commercial and industrial applications. Calorifiers are available as standard patterns, horizontal or vertical or high performance ‘Heatspeed’ types. All are manufactured from copper, long recognised as the best material for water storage vessels giving the longest life. The direct pattern is ideal where the only heatsource is electricity, although these can also be made to incorporate a solar coil where a solar input is also available. The indirect patterns as either 1 or 2 hour recovery as standard, but can be specified for a 30 minute recovery when ordering. These can also be used with solar or solid fuel inputs. Extra tappings or coils are also available to run underfloor heating from. Capacities range up to 1000 litres and products are individually made to order to accommodate connections and heat exchangers to suit individual applications. A full range of extras including bolted heads, inspection ports, hand holes and cradles are available if required. Systems with high draw rate potential over extended periods are best served by units with high recovery capability and moderate storage capacity for balancing purposes. Indirect Calorifier Specifications Size (mm) Nominal (litres) 30 minute recovery coil surface area (m2) 60 minute recovery coil surface area (m2) Working head (m) 1200 x 600 280 1.14 0.86 10, 15, 18.5, 31 1475 x 600 356 1.4 1.05 10, 15, 18.5, 31 1475 x 685 450 1.78 1.33 10, 15, 18.5, 24 1830 x 600 450 1.78 1.33 10, 15, 18.5, 27 1675 x 685 522 2.04 1.53 10, 15, 18.5, 24 1625 x 760 659 2.43 1.82 10, 18.5 1830 x 760 750 2.78 2.08 10, 18.5 2135 x 760 900 3.28 2.46 10, 18.5 20 HeatSpeed Cylinders Quick recovery cylinders and calorifiers for commercial and industrial uses The Heatspeed calorifiers have very high efficiency Although in many situations the advantages inherent in a heat exchange elements and are designed with energy semi-storage high output calorifier will be paramount, there conservation very much in mind. They have a smaller will be situations in which very large storage capability is a storage capacity than conventional calorifiers yet can offer necessity. For instance, where large quantities of water are larger volumes of hot water per hour. Heatspeed calorifiers required on an intermittent basis and are called off in a very are only available in the vertical format. short period of time, typically 20 minutes or less, i.e. at the end of a factory shift or in certain types of process work. In Their main features are: these circumstances we recommend a Commercial pattern • Considerable saving in floor space. calorifier with a 2, 3 or 4 hour recovery heat exchanger. • Lower standing losses because less water is being stored. Your regional Gledhill manufacturing centre will be able to • Greater boiler efficiency because the heat exchanger assist in the sizing and specification of these cylinders to can absorb more of the boiler output thus reducing ensure that the hot water demands are satisfied. cycling with its attendant efficiency losses, particularly in the summer months. • Reduction in capital costs. The Heatspeed range of calorifiers is designed to recover their contents from 10°C to 65°C three times in an hour with primary water at 82°C flow temperatures under pumped circulation. Compared to the Commercial range of cylinders are designed to recover their contents from 10°C to 65°C in one or two hours with primary water flow at 82°C under gravity circulation and 1/2 or 1 hour under pumped conditions. HeatSpeed Specifications Storage Capacity Nominal (litres) Actual (mm) Continuous secondary flow rate @55°C (litres/hr) HS66 320 300 1788 20 Model Recovery time (minutes) HS83 385 377 2156 20 HS103 468 450 2556 20 HS104 473 450 2556 20 HS121 570 550 3125 20 HS146 680 664 3841 20 HS168 800 764 4543 20 HS197 910 896 5106 20 HS217 1000 986 5675 20 21 Special Order ... Installer Name: Company: Phone No: Tapping Positions Merchant: Phone No: Don’t forget Shower Take-Offs, Drain Connections and Secondary Returns can be factory fitted! Size: 15, 22, 28 compression with nut & olive or ½” up to 2” screwed connections CYLINDER COMBINATION TANK Please show size and position of bosses and floor to centre measurements if critical. PLAN VIEW Additional Details WORKING HEAD TYPE INSULATION 10m Direct 35mm EnviroFoam 15m Indirect 60mm Flexilag 25m Automatic Steelace 31m Solar Sunspeed Plain 22 Fax to your local depot for immediate attention, full contact details available from www.gledhill.net Special Order ... Installer Name: Company: Phone No: Tapping Positions Merchant: Phone No: Don’t forget Shower Take-Offs, Drain Connections and Secondary Returns can be factory fitted! Size: 15, 22, 28 compression with nut & olive or ½” up to 2” screwed connections SEAGULL COMBINATION TANK Please show size and position of bosses and floor to centre measurements if critical. PLAN VIEW Additional Details TYPE TYPE Material Direct Gravity Fed Copper Indirect Electric Thermal Store Steelace Pre-Plumbed Automatic Central Plant 23 Fax to your local depot for immediate attention, full contact details available from www.gledhill.net UK Super Depot Infrastructure Blackpool Head Office and Stainless Steel Manufacturing Site Nottingham Telephone: 01773 580684 Fax: 01773 581129 Blackburn Telephone: 01254 693844 Fax: 01254 673615 Oldbury Telephone: 01384 636245 Fax: 01384 413700 Bristol Telephone: 01179 820814 Fax: 01179 820821 Paignton Telephone: 01803 557470 Fax: 01803 559213 Inverkeithing Telephone: 01383 414133 Fax: 01383 413123 Southampton Telephone: 01329 846601 Fax: 01329 845881 Luton Telephone: 01582 728253 Fax: 01582 318976 For technical advice please call 01253 474584 Maidstone Telephone: 01622 714770 Fax: 01622 882286 SUPPLIERS TO THE MERCHANT TRADE FOR OVER 40 YEARS Gledhill Building Products Limited Sycamore Estate, Squires Gate, Blackpool FY4 3RL Tel: 01253 474550 Fax: 01253 474551 sales@gledhill.net Gledhill Building Products produce cylinders for use with a wide range of heat sources including; Gas and oil boilers Ground source heat pumps Electricity Solar energy Air source heat pumps Wood burning stoves Further information on Gledhill products can be found on the internet at www.gledhill.net “Only the best is acceptable” To protect our environment, we use copper a totally recyclable metal, which never becomes waste. FM 02057 Due to a programme of continuous improvement Gledhill Building Products reserve the right to modify products without prior notice. It is advisable to check the product technical detail by using the latest design and installation manuals available from our technical support team or on our website. It is an offence to copy or adapt this document without consent of the owner. Spec 115/06 02/16
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.6-c014 79.156797, 2014/08/20-09:53:02 Create Date : 2016:02:23 09:21:39Z Metadata Date : 2016:02:23 09:21:52Z Modify Date : 2016:02:23 09:21:52Z Creator Tool : Adobe InDesign CC 2014 (Windows) Instance ID : uuid:074ca9d0-447e-4dc7-8ce2-0c4a98cd9169 Original Document ID : xmp.did:983A9BB1F30FDF11BFEA8E8AECDCB2A1 Document ID : xmp.id:91821bda-a122-0a47-a9cf-702835fb7baa Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:34c87adc-40ce-b54b-83b3-b4acc054f45c Derived From Document ID : xmp.did:733C28701F19E311895CF675578D5A0F Derived From Original Document ID: xmp.did:983A9BB1F30FDF11BFEA8E8AECDCB2A1 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2014 (Windows) History Changed : / History When : 2016:02:23 09:21:39Z Format : application/pdf Producer : Adobe PDF Library 11.0 Trapped : False Page Count : 24 Creator : Adobe InDesign CC 2014 (Windows)EXIF Metadata provided by EXIF.tools