S4500WS Pp82 117v5 SR60 Starite Fibrewound Tank Specs
User Manual: SR60
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
fibrewound pressure tanks ® SR40 SR119 SR85 FIBREWOUND PRESSURE TANKS SR48 Built Tough… for Quality Every Signature 2000® tank utilizes a durable, FDA approved air cell which is resistant to chlorine and will not promote taste or odor problems associated with iron bacteria that may be present in the water supply. Built Tough… for Durability SR60 Each tank is wrapped with more than three miles of over-lapping, continuous fiberglass strands, sealed with high grade epoxy resin, then oven cured. Tough composite construction means longer lasting tanks that will not rust, corrode, dent or scratch. SR35 SR20 Built Tough… for Easy Installation and Service Not only is composite construction tougher, it's also more lightweight… as little as half the weight of steel tanks. Installation is faster, easier and can be handled by one person. Repairable with the tank installed.P UL Classified to ANSI/NSF 61, Drinking Water System Components APPLICATIONS ORDERING INFORMATION Max. Catalog Capacity Diameter Number gal/liter inch/cm SR20-6S SR35-10S SR40-12S SR48-14S SR60-18 SR85-25 SR119-35 20/76 35/133 40/151 48/182 60/228 85/323 119/452 16/41 20/51 16/41 20/51 24/61 24/61 28/72 Height inch/cm 36/92 39.5/101 60.5/154 50.25/128 45.75/117 59.5/152 62.25/159 ■ Service Connection Clearance Precharge Size Connection inch/cm PSI/kPa Female Material 48/122 51/130 80/201 69/175 58/148 78/199 81/206 40/276 40/276 40/276 40/276 40/276 40/276 40/276 1" NPT 1" NPT 1" NPT 1" NPT 1-1/4" NPT 1-1/4" NPT 1-1/4" NPT Stn. Stl. Stn. Stl. Stn. Stl. Stn. Stl. Stn. Stl. Stn. Stl. Stn. Stl. Use wherever pressurized Drawdown in Gallons/Liters 20-40 30-50 6.9/26.2 12.1/46.0 13.8/52.2 16.5/62.5 20.7/78.6 29.3/111.3 41.1/156.1 5.9/22.4 10.3/39.1 11.8/44.7 14.2/53.8 17.7/67.2 25.1/95.3 35.1/133.3 Maximum Operating Pressure = 100 PSI Maximum Liquid Temperature: 120°F (49°C) Maximum External (Ambient) Temperature: 125°F (52°C) S4567WS • Customer Service: (262) 728-9181 1 Delavan, WI 53115 USA • www.pumps.com 40-60 Weight lbs/kg 5.2/19.7 25/11 9.0/34.2 40/18 10.3/39.0 36/16.3 12.4/46.9 41/18.6 15.5/58.9 60/27 21.9/83.2 75/34 30.7/116.6 105/48 fibrewound pressure tanks APPLICATIONS ■ FEATURES Use wherever pressurized tanks are needed in water systems applications. SPECIFICATIONS Inner Liner – One-piece highdensity polyethylene Outer Shell – Fiberglass-wound and epoxy resin sealed Air Cell – Heavy mil ethyl-vinylacetate (EVA) Upper and Lower Flanges – Reinforced polypropylene Base – One piece high density polyethylene Service Connection – Stainless steel on all models Air Valve – Brass body, Schrader core assembly Weather Cap – High density polyethylene Signature 2000® Fibrewound Pressure Tank assembly is classified to ANSI/NSF Standard 61 for water system components. Tank Base – Rigid molded polyethylene is the sturdiest composite base on the market. Corrosion- and impact-resistant. Base rotates 360° for ease-of-service hook-up. Replaceable Air Cell – With the tank installed! Air cell access is via a top mount design. Generous and accessible air cell opening facilitates easy removable and re-installation of replacement air cell (with the professional contractor in mind). Five Year Warranty – Managed and provided by WICOR Industries, the only US manufacturer to design and manufacture fibrewound and steel tanks! ■ Durable Composite Construction – A rugged one-piece molded, inner-liner of premium high-density polyethylene. ■ Miles of continuous overlapping fiberglass strands, sealed with oven cured epoxy make the outer-shell impervious to rust, dents, and ultra-violet rays (no paint to scratch and touch-up). ■ Proprietary wrap pattern makes the tank stronger than steel. Tanks can be installed with a wider range of pressure settings, so you can select the system pressure you want. Air Cell – The air cell is fabricated from durable and extensively tested ethyl-vinyl-acetate (EVA). ■ EVA is resistant to chlorine. ■ EVA will not support iron bacteria growth that may be present in the water supply. ■ EVA and Polyethylene meet FDA requirements for potable water supplies. Signature 2000® is a registered trademark of WICOR Industries. In order to provide the best products possible, specifications are subject to change. TANK SIZING RULE: ® Size tank for one gallon of drawdown for each gallon per minute at pump capacity. EXAMPLE: For a 1 HP - 20 GPM unit pumping 20 gallons per minute on a 30-50 pressure switch setting, the properly sized Signature 2000® tank is a SR85-25, which has a 25.1 gallon drawdown. S4567WS • Customer Service: (262) 728-9181 2 Delavan, WI 53115 USA • www.pumps.com fibrewound pressure tanks OPERATING CYCLE 1. Tank nearly empty – Air expands, filling area inside tank 2. Water begins to enter tank – Air is compressed in air cell as tank fills with water Air Air Air Air Air Air Air Air Air Water Water Fig. 2A Fig. Fig. 2A 2B Air Air Air Water Water 4. Water being drawn from tank – Compressed air in air cell forces water out of tank 5. Tank now empty – New cycle ready to begin A Air Air Water Fig. Fig. 2B 2A 2C Fig. 2D 2775 0297 Air Wa Water Fig. 2B 2A Fig. Fig. 2C 2775 0297 Air Water Water Water 3. Pump-up cycle completed – Air is now compressed to cut off setting of pressure switchAir Air Fig.2B 2C Fig. Fig. 2D 2775 0297 Fig. 2D 2C Fig. 2D Fig. 2A Fig. 2B 2775 0297 CHART A TANK SELECTION CHART Pump GPM 5 7.5 10 12.5 15 20 30 50 20-40 1 Minute SR20 SR20 SR40 SR48 SR60 SR60 SR85 SR85 (2) 2 Minute SR35 SR48 SR60 SR60 SR85 SR119 SR85 (2) SR119 (2) System Pressure Switch Setting – PSI 30-50 Run Times 1 Minute 2 Minute SR20 SR35 SR35 SR48 SR35 SR60 SR40 SR85 SR48 SR119 SR60 SR119 SR119 SR60 + SR119 SR85 (2) SR119 (3) 40-60 1 Minute SR20 SR35 SR40 SR48 SR60 SR85 SR119 SR119 (2) 2 Minute SR40 SR60 SR85 SR85 SR119 SR85 (2) SR119 (2) SR119 (4) NOTE: Drawdown will be affected by operating temperature of the system, accuracy of the pressure switch and gauge, the actual precharge pressure, and rate of fill. CHART B DRAWDOWN VOLUME MULTIPLIER* (APPROXIMATE) Pump Off Pump Start Pressure – PSI Pressure 50 40 30 20 10 PSI 20 0.26 30 0.41 0.22 40 0.37 0.18 0.15 0.31 0.46 50 60 0.40 0.27 0.13 70 0.47 0.35 0.24 80 0.42 0.32 0.38 0.48 90 0.44 100 60 70 80 0.12 0.21 0.29 0.35 0.11 0.19 0.26 0.10 0.17 *Utilize this chart if proper selection cannot be made using Chart A. Drawdown based on Boyle’s Law. Procedure: 1. Identify drawdown 2. Insert multiplier (X) into the following formula: 3. Refer to “Ordering Information” multiplier relating to Pump GPM x Min Run Time = Minimum Tank Table – Max. Capacity Gals. Capacity Required specific application. Multiplier (X) S4567WS • Customer Service: (262) 728-9181 3 Fig 2775 0297 Delavan, WI 53115 USA • www.pumps.com fibrewound pressure tanks S4567WS (7/04) • Customer Service: (262) 728-9181 4 Delavan, WI 53115 USA • www.pumps.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Page Count : 4 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:377fb1ab-3625-49c8-a7ca-ceea44c8cb50 Producer : QuarkXPress(tm) 6.1 X Press Private : %%DocumentProcessColors: Cyan Black.%%DocumentCustomColors: (PANTONE 300 C).%%CMYKCustomColor: 1 .44 0 0 (PANTONE 300 C).%%EndComments Create Date : 2004:09:13 09:31:40Z Creator Tool : QuarkXPress(tm) 6.1 Modify Date : 2004:09:27 10:29:02-05:00 Metadata Date : 2004:09:27 10:29:02-05:00 Document ID : uuid:2018c626-353f-4a34-89ec-305b593ea84b Format : application/pdf Title : S4500WS pp82-117v5 Creator : QuarkXPress(tm) 6.1EXIF Metadata provided by EXIF.tools