C KEMI301B Superfloc 491kvp (MSDS)

User Manual: KEMI301B

Open the PDF directly: View PDF PDF.
Page Count: 7

DownloadC KEMI301B Superfloc C-491kvp (MSDS)
Open PDF In BrowserView PDF
MSDS:
0013645
Print Date: 08/30/2008
Revision Date: 08/22/2008

SAFETY DATA SHEET
_____________________________________________________________________________

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE
COMPANY/UNDERTAKING
Product Name:

SUPERFLOC® C-491KVP

Product Description:
Intended/Recommended Use:

Cationic polyacrylamide
Flocculant

Kemira Kemi AB, P.O. Box 902, SE-25109, HELSINGBORG, Sweden - Phone No.: +46 42 17 10 00
ProductSafety.NL.Botlek@kemira.com
EMERGENCY PHONE: IN THE NETHERLANDS: 0181-295500; OUTSIDE THE NETHERLANDS: 31-181-295500
® indicates trademark registered in the U.S. Outside the U.S., mark may be registered, pending or a trademark. Mark is
or may be used under license.

_____________________________________________________________________________

2. HAZARDS IDENTIFICATION
HUMAN AND ENVIRONMENTAL HAZARDS
None
−⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯−−

3. COMPOSITION/INFORMATION ON INGREDIENTS
HAZARDOUS INGREDIENTS
Component / CAS No.
Adipic acid
124-04-9

%
~ 4.5

(w/w)

EC-No
204-673-3

Symbol / Risk Phrases
Xi; R36

See Section 16 for Ingredient Risk Phrase Text

_____________________________________________________________________________

4. FIRST AID MEASURES
Ingestion:
Material is not expected to be harmful by ingestion. No specific first aid measures are required.
Skin Contact:
Wash immediately with plenty of water and soap.
Eye Contact:
Rinse immediately with plenty of water for at least 15 minutes.
Inhalation:
Remove to fresh air. If breathing is difficult, give oxygen. Obtain medical advice if there are persistent symptoms.
−⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯−−

SUPERFLOC® C-491KVP

MSDS:

0013645

Print Date:

08/30/2008

Page 2 of 7

5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media:
Use water spray or fog, carbon dioxide or dry chemical.
Protective Equipment:
Firefighters, and others exposed, wear self-contained breathing apparatus. Wear full firefighting protective clothing. See
MSDS Section 8 (Exposure Controls/Personal Protection).
Special Hazards:
Dust may be explosive if mixed with air in critical proportions and in the presence of a source of ignition.
−⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯−−

6. ACCIDENTAL RELEASE MEASURES
Personal precautions:
Refer to Section 8 (Exposure Controls/Personal Protection) for appropriate personal protective equipment.
Methods For Cleaning Up:
Slippery when wet. Sweep up into containers for disposal. Flush spill area with water. If slipperiness remains apply more
dry-sweeping compound. Prevent liquid entering sewers.
−⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯−−

7. HANDLING AND STORAGE
HANDLING
Maintain good housekeeping to control dust accumulations.
STORAGE
To avoid product degradation and equipment corrosion, do not use iron, copper or aluminum containers or equipment.
Material is hygroscopic and should not be exposed to moisture in order to maintain product integrity.
Storage Temperature: Room temperature
Reason: Integrity.

_____________________________________________________________________________

8. EXPOSURE CONTROLS / PERSONAL PROTECTION
CONTROL PARAMETERS - Limits

Adipic acid 124-04-9
The Netherlands: MAC (Maximal Aanvaarde Concentratie)
Denmark: Graensevaerdier
ACGIH (TLV)

5 mg/m3 (MAC)
5 mg/m3 (TWA)
5 mg/m3 (TWA)

Engineering Measures:
Engineering controls are not usually necessary if good hygiene practices are followed.
Respiratory Protection:
Where exposures are below the established exposure limit, no respiratory protection is required.
Where exposures exceed the established exposure limit, use respiratory protection recommended for the material and
level of exposure.
Eye Protection:
Wear eye/face protection.

MSDS:

SUPERFLOC® C-491KVP

0013645

Print Date:

08/30/2008

Page 3 of 7

Skin Protection:
Avoid skin contact.
Wear impermeable gloves.
Additional Advice:
Before eating, drinking, or smoking, wash face and hands thoroughly with soap and water.

_____________________________________________________________________________

9. PHYSICAL AND CHEMICAL PROPERTIES
Color:
Appearance:
Odor:
Boiling Point:
Melting Point:
Vapor Pressure:
Specific Gravity/Density:
Vapor Density:
Percent Volatile (% by wt.):
pH:
Saturation In Air (% By Vol.):
Evaporation Rate:
Solubility In Water:
Volatile Organic Content (EU):
Flash Point:
Flammable Limits (% By Vol):
Autoignition Temperature:
Decomposition Temperature:
Partition coefficient (noctanol/water):

off white
crystalline powder
none
Not applicable
Not available
Not applicable
0.75
Not applicable
7
3 - 5(0.5% aqueous solution)
Not applicable
Not applicable
Limited by viscosity
Not available
Not applicable
Not applicable
>150 °C
>150 °C
Not applicable

_____________________________________________________________________________

10. STABILITY AND REACTIVITY
Stability:
Conditions To Avoid:
Polymerization:
Conditions To Avoid:
Materials To Avoid:

Stable
None known
Will not occur
None known
Strong oxidizing agents.

Carbon dioxide
Carbon monoxide (CO)
Ammonia (NH3)
oxides of nitrogen
oxides of sulfur (includes sulfur di and tri oxides)
−⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯−−
Hazardous Decomposition
Products:

11. TOXICOLOGICAL INFORMATION
POTENTIAL HEALTH EFFECTS
None

PRODUCT TOXICITY INFORMATION

SUPERFLOC® C-491KVP

MSDS:

0013645

Print Date:

Page 4 of 7

08/30/2008

ACUTE TOXICITY DATA
oral
dermal
inhalation

rat
rabbit
rat

Acute LD50>5,000 mg/kg
Acute LD50
Acute LC50

LOCAL EFFECTS ON SKIN AND EYE
Acute Irritation
Acute Irritation

skin
eye

Not irritating
Not irritating

ALLERGIC SENSITIZATION
Sensitization
Sensitization

dermal
inhalation

No data
No data

>2,000 mg/kg
.>20.0 mg/l
.

GENOTOXICITY
Assays for Gene Mutations
Ames Salmonella Assay

No data

HAZARDOUS INGREDIENT TOXICITY DATA
ACUTE TOXICITY DATA
Adipic acid
oral (gavage) rat Acute LD50 > 11000 mg/kg
LOCAL EFFECTS ON SKIN AND EYE
Adipic acid
Acute Eye Irritation rabbit Irritating
Acute Dermal Irritation Not irritating

_____________________________________________________________________________

SUPERFLOC® C-491KVP

MSDS:

0013645

Print Date:

08/30/2008

Page 5 of 7

12. ECOLOGICAL INFORMATION
This material is not classified as dangerous for the environment.
The effects on aquatic organisms are due to an external (non-systemic) mode of action, and are significantly reduced (by
a factor of 7-20) within 30 minutes due to binding of the product to dissolved organic carbon and inorganic sorbents such
as clays and silts.
All ecological information provided was conducted on a structurally similar product.
Acute toxicity tests conducted using environmentally representative water gave the following results:

ALGAE TEST RESULTS
Test: Growth Inhibition (OECD 201)
Due to the cationicity of
the polymer, an algae
growth inhibition test is
not appropriate.

FISH TEST RESULTS
Test: Acute toxicity, freshwater (OECD 203)
Duration: 96 hr.
Species: Zebra Fish (Brachydanio rerio)
LC50
>1 - 10 mg/l

INVERTEBRATE TEST RESULTS
Test: Acute Immobilization (OECD 202)
Duration: 48 hr
Species: Water Flea (Daphnia magna)
>10 - 100 mg/l
EC50

DEGRADATION
Test: CO2 Evolution: Modified Sturm (OECD 301B)
Duration: 28 day

SUPERFLOC® C-491KVP

MSDS:

0013645

Print Date:

08/30/2008

Page 6 of 7

This material is not
readily biodegradable
(OECD 301B), but
degradable by
hydrolysis. The large
polymer size is
incompatible with
transport across
biological membranes
and diffusion; the
bioconcentration factor
is therefore considered
to be zero.
−⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯−−

13. DISPOSAL CONSIDERATIONS
The Company encourages the recycle, recovery and reuse of materials, where permitted. If disposal is necessary, The
Company recommends that organic materials, especially when classified as hazardous waste, be disposed of by thermal
treatment or incineration at approved facilities. All local and national regulations should be followed.
−⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯−−

14. TRANSPORT INFORMATION
This section provides basic shipping classification information. Refer to appropriate transportation regulations for specific
requirements.

ADR/RID
Class: Not Applicable/Not Regulated
IMO
Proper Shipping Name: Not applicable/Not regulated
ICAO / IATA
Proper Shipping Name: Not applicable/Not regulated
Packing Instructions/Maximum Net Quantity Per Package:
Passenger Aircraft: Cargo Aircraft: −⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯−−

15. REGULATORY INFORMATION
EU MARKING AND LABELING
Symbol(s):

None required

Risk Phrases:
None
Safety Phrases:
S82 - Spills are very slippery when wet.
INVENTORY INFORMATION
European Union (EU):
All components of this product are included on the European Inventory of Existing Chemical Substances (EINECS)
or are not required to be listed on EINECS.
United States (USA):
All components of this product are included on the TSCA Chemical Inventory or are not required to be listed on the
TSCA Chemical Inventory.

MSDS:

SUPERFLOC® C-491KVP

0013645

Print Date:

08/30/2008

Page 7 of 7

Canada:
All components of this product are included on the Domestic Substances List (DSL) or are not required to be listed
on the DSL.
Australia: All components of this product are included in the Australian Inventory of Chemical Substances (AICS).
China: All components of this product are included on the Chinese inventory or are not required to be listed on the
Chinese inventory.
Japan: All components of this product are included on the Japanese (ENCS) inventory or are not required to be
listed on the Japanese inventory.
Korea: All components of this product are included on the Korean (ECL) inventory or are not required to be listed
on the Korean inventory.
Philippines: All components of this product are included on the Philippine (PICCS) inventory or are not required to
be listed on the Philippine inventory.

_____________________________________________________________________________

16. OTHER INFORMATION
Reasons for Issue:

New Format

Component Risk Phrases
Adipic acid
R36 - Irritating to eyes.
−⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯−−
Richard Moye, Product Regulatory, 1-251-662-1581

−⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯−−
This information is given without any warranty or representation. We do not assume any legal responsibility for same, nor do we give permission,
inducement, or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation, and
verification. Before using any product, read its label.

−⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯−−



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Page Count                      : 7
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:6dc8dafa-0a75-477a-a05b-653d60b3dde6
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2008:08:30 19:38:00-05:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2008:08:30 19:38:00-05:00
Document ID                     : uuid:03eaa811-3c58-4598-9963-95597dd315df
Format                          : application/pdf
Title                           : c:\program files\wercs50\users\Moyer\wercs.ps
Creator                         : MoyeR
Author                          : MoyeR
EXIF Metadata provided by EXIF.tools

Navigation menu