FM56 TDS Kane Ace
User Manual: FM56
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
TDS TEchnical data sheet High Performance Polymers DIVISION Kane Ace™ FM56 / Acrylic Impact Modifier PRODUCT DESCRIPTION Kane Ace™ FM56 is an all-acrylic polymer designed to improve the impact properties of rigid PVC formulations. GENERAL BENEFITS • High performance acrylic impact modifier providing total formulation cost effectiveness. • Outstanding impact retention under various weather conditions. • Suitable for outdoor and durable PVC based products. TYPICAL APPLICATIONS Window profiles, sidings, pipes, gutters, furniture sheets. TYPICAL PROPERTIES Chemical Description Physical Form Bulk Density Volatile Matter Content Particle Size, d50 Impact Strength Acrylic Copolymer fine white powder 0,42 g/cm³ 0,5 % 200 µm very good Note: please be aware that typical properties are approximate reference values. For guaranteed quality specifications, please contact us. DOCUMENT REFERENCE TDS_KaneAce_FM56 | version nr. 1.0 QUALITY CONTROL Kaneka Belgium NV follows internationally recognized quality management principles. Our valid ISO certificates can be downloaded from our website. EN ISO 9001: 2008 “Quality Management System” EN ISO 14001: 2004 “Environmental Management System” EN ISO 50001: 2011 “Energy Management System” STORAGE AND HANDLING Please consult the “General safety recommendations for the storage and handling of Kane Ace™ powders” and Safety Data Sheet for additional information concerning personal protective measures, safety, health and environmental information. SHELF LIFE GUARANTEE On condition that there is taken care about the conditions for storage(*) as these are mentioned in the Safety Data Sheet and on the packaging itself of the Kane Ace™ product, Kane Ace™ FM56 can be maintained in stock, keeping its characteristics, for a period up to three years after delivery date. (*) Store free, in original package. Store in cool area, do not store near heat sources. Store in dry well-ventilated area, avoid contact with moisture. Protect from light, especially from direct exposure to sunlight. TDS TEchnical data sheet High Performance Polymers DIVISION REGULATORY INFORMATION Regulatory information is supplied upon request. Please contact info.regulatoryppd@kaneka.be HARMONIZED TARIFF CODE 39069090 CAS NUMBER CAS number assigned to identify Kane Ace™ FM56 is 31261-08-2 PRODUCT PACKAGING Kane Ace™ FM56 is supplied in 25-kg bags [750 kg per pallet] and in 500-kg semi-bulk bags [1000 kg per pallet]. Make your dreams happen and create a life changing impact through partnership ! ADDITIONAL INFORMATION For additional information or specific recommendations for your intended application, please contact us. HIGH PERFORMANCE POLYMERS DIVISION Technical Service Department Phone: +32 (0) 14 25 78 37 Fax: +32 (0) 14 25 78 81 Email: info.modifier@kaneka.be Disclaimer All information (including but not limited to technical statements, instructions, recommendations or suggestions) contained in this bulletin are for general information purposes only. The information is provided to the best of our knowledge and while we endeavour to keep the information up to date and correct according to the state of the art, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability or suitability with respect to the information contained in this bulletin. Any reliance you place on such information is therefore strictly at your own risk. In no event will we be liable for any loss or damage (including, without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of profits) arising out of, or in connection with, the use of this information and /or the use, handling, processing or storage of Kane Ace™. SUPPLIER KANEKA BELGIUM NV Nijverheidsstraat 16, B - 2260 Westerlo, BELGIUM www.kaneka.be FOLLOW US: @kaneka_be linkedin.com/company/Kaneka-Belgium-NV facebook.com/KanekaBelgiumNV
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c067 79.157747, 2015/03/30-23:40:42 Create Date : 2015:08:21 14:21:54+02:00 Metadata Date : 2015:08:21 14:21:55+02:00 Modify Date : 2015:08:21 14:21:55+02:00 Creator Tool : Adobe InDesign CC 2015 (Windows) Instance ID : uuid:351e3ea4-91cc-4d94-8090-8fbb4e352cac Original Document ID : xmp.did:436a5383-0257-4ad1-877c-8f13d2b089e7 Document ID : xmp.id:0997938c-3b7f-034a-adc2-88edd9a2d46f Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:5be1f41b-00e0-9b49-ac46-450dbc55a323 Derived From Document ID : xmp.did:5b2fc5c4-c5dd-4d40-b596-0cf50e48ef04 Derived From Original Document ID: xmp.did:436a5383-0257-4ad1-877c-8f13d2b089e7 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Windows) History Changed : / History When : 2015:08:21 14:21:54+02:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 2 Creator : Adobe InDesign CC 2015 (Windows)EXIF Metadata provided by EXIF.tools