TI BLE Sample Applications Guide

• Table Of Contents
• References
• 1 Overview
  • 1.1 Introduction
• 2 Blood Pressure Sensor
  • 2.1 Project Overview
    • 2.1.1 User Interface
    • 2.1.2 Basic Operation
  • 2.2 Software Description
    • 2.2.1 Initialization
    • 2.2.2 Event Processing
    • 2.2.3 Callbacks
    • 2.2.4 Sending Blood Pressure Measurement Indications
    • 2.2.5 Sending Intermediate Measurement Notifications
    • 2.2.6 Blood Pressure Measurement
• 3 Health Thermometer
  • 3.1 Project Overview
    • 3.1.1 User Interface
    • 3.1.2 Basic Operation
  • 3.2 Software Description
    • 3.2.1 Initialization
    • 3.2.2 Event Processing
    • 3.2.3 Callbacks
    • 3.2.4 Sending Temperature Indications
    • 3.2.5 Sending Intermediate Measurement Notifications
    • 3.2.6 Sending Interval Change Indications
    • 3.2.7 Thermometer Measurement Format
• 4 Heart Rate Sensor
  • 4.1 Project Overview
    • 4.1.1 User Interface
    • 4.1.2 Basic Operation
  • 4.2 Software Description
    • 4.2.1 Initialization
    • 4.2.2 Event Processing
    • 4.2.3 Callbacks
    • 4.2.4 Sending Notifications
• 5 Cycling Speed and Cadence (CSC) Sensor
  • 5.1 Project Overview
    • 5.1.1 User Interface
    • 5.1.2 Basic Operation
  • 5.2 Software Description
    • 5.2.1 Initialization
    • 5.2.2 Event Processing
    • 5.2.3 Callbacks
    • 5.2.4 Sending Notifications
    • 5.2.5 Confirming Indications
    • 5.2.6 Reading from the Sensor
    • 5.2.7 Writing to the Sensor
    • 5.2.8 Neglect Timer
• 6 Running Speed and Cadence (RSC) Sensor
  • 6.1 Project Overview
    • 6.1.1 User Interface
    • 6.1.2 Basic Operation
  • 6.2 Software Description
    • 6.2.1 Initialization
    • 6.2.2 Event Processing
    • 6.2.3 Callbacks
    • 6.2.4 Sending Notifications
    • 6.2.5 Confirming Indications
    • 6.2.6 Reading from the Sensor
    • 6.2.7 Writing to the Sensor
    • 6.2.8 Neglect Timer
• 7 Glucose Collector
  • 7.1 Project Overview
    • 7.1.1 User Interface
    • 7.1.2 Basic Operation
    • 7.1.3 Record Filter Configuration
  • 7.2 Software Description
    • 7.2.1 Initialization
    • 7.2.2 Event Processing
    • 7.2.3 Callbacks
    • 7.2.4 Service Discovery
    • 7.2.5 Service Configuration
    • 7.2.6 Record Access Control Point
• 8 Glucose Sensor
  • 8.1 Project Overview
    • 8.1.1 User Interface
    • 8.1.2 Basic Operation
  • 8.2 Software Description
    • 8.2.1 Initialization
    • 8.2.2 Event Processing
    • 8.2.3 Callbacks
    • 8.2.4 Sending Notifications and Indications
    • 8.2.5 Record Access Control Point Processing
• 9 HID Advanced Remote Control
• 10 HID Emulated Keyboard
  • 10.1 Project Overview
    • 10.1.1 User Interface
    • 10.1.2 Basic Operation
  • 10.2 Software Description
  • 10.3 HidEmuKbd Application
    • 10.3.1 Initialization
    • 10.3.2 Event Processing
    • 10.3.3 Callbacks
    • 10.3.4 Sending Notifications
  • 10.4 HID Device Profile
    • 10.4.1 Initialization
    • 10.4.2 Event Processing
    • 10.4.3 Callbacks
    • 10.4.4 GATT Read and Write Callbacks
    • 10.4.5 Mapping HID Reports to HID Characteristics
    • 10.4.6 Sending and Receiving HID Reports
    • 10.4.7 Advertising and Connection Procedures
• 11 HostTestRelease- BLE Network Processor
• 12 KeyFobDemo
  • 12.1 Project Overview
    • 12.1.1 User Interface
    • 12.1.2 Battery Operation
    • 12.1.3 Accelerometer Operation
    • 12.1.4 Keys
    • 12.1.5 Proximity
  • 12.2 Software Description
    • 12.2.1 Initialization
    • 12.2.2 Event Processing
    • 12.2.3 Callbacks
• 13 SensorTag
  • 13.1 Operation
  • 13.2 Sensors
• 14 SimpleBLECentral
• 15 SimpleBLEPeripheral
• 16 TimeApp- BLE Watch
  • 16.1 Project Overview
    • 16.1.1 User Interface
    • 16.1.2 Basic Operation
  • 16.2 Software Description
    • 16.2.1 Initialization
    • 16.2.2 Event Processing
    • 16.2.3 Callbacks
    • 16.2.4 Service Discovery
    • 16.2.5 Service Configuration
    • 16.2.6 Handling Indications and Notifications
    • 16.2.7 Clock Time
• 17 Serial Bootloader
  • 17.1 Basic Operation
    • 17.1.1 SBL Developer’s Guide
  • 17.2 Target Requirements
  • 17.3 Server Requirements
• 18 USB Bootloader
  • 18.1 Basic Operation
    • 18.1.1 Flash UBL
    • 18.1.2 Build the Project to be Bootloaded
    • 18.1.3 Download the User Project Image (.bin)
• 19 Over Air Download
  • 19.1 OAD Developer’s Guide
  • 19.2 Target Requirements
  • 19.3 Server Requirements
• 20 General Information
  • 20.1 Document History
• 21 Address Information
• 22 TI Worldwide Technical Support