TN1169 LatticeECP3 SysCONFIG Usage Guide Lattice ECP3 Sys CONFIG
User Manual:
Open the PDF directly: View PDF
Page Count: 50
- LatticeECP3 sysCONFIG Usage Guide
- Introduction
- General Configuration Flow
- Configuration Pins
- Configuration Process and Flow
- FPGA Configuration Control Pin Definitions
- Configuration Modes
- Bitstream Generation Software Usage
- Device Wake-Up
- Bitstream Generation Property Options
- Bitstream Encryption/Decryption Flow
- File Formats
- Combining Configuration Modes
- Chain Mode Options
- References
- Technical Support Assistance
- Revision History
- Appendix A. Configuration Memory Requirements
- Appendix B. Lattice Diamond Usage Overview
- Converting an ispLEVER Project to Lattice Diamond
- Importing an ispLEVER Design Project
- Adjusting PCS Modules
- Regenerate PCS Modules
- Using IPexpress with Lattice Diamond
- Creating a New Simulation Project Using Simulation Wizard
- Setting Global Preferences in Diamond
- Setting Bitstream Generation Options in Diamond
- Setting Security Options in Diamond