INFINITY 24ANA TRAINING MATERIALS CATALOG

User Manual: INFINITY 24ANA

Open the PDF directly: View PDF .
Page Count: 32

Download
Open PDF In Browser	View PDF

Carrier University

2018 Training Materials Catalog
Service, Controls and HVAC System Design

Theory, Skills and Equipment Training
for teaching, self-study and presentations

Willis Carrier
a sustaining vision
Over 100 years ago, a humble but determined engineer solved one of mankind’s
most elusive challenges by controlling the indoor environment. A leading engineer
of his day, Carrier would file more than 80 patents over the course of his career.
His genius would enable incredible advancements in health care, manufacturing
processes, research, building capacities, food preservation, transportation, art
and historical conservation, general productivity, indoor comfort and much more.

Carrier’s foresight changed the world forever and paved the way for over a century
of once-impossible innovations. Yet in addition to being an accomplished inventor,
he was also an avid outdoorsman. Carrier recognized the power and beauty of the
natural environment. This appreciation of our world and its resources continues to
guide Carrier Corporation today.

Harnessing the same vision and determination Willis did so many years ago,
the men and women of Carrier work every day to accomplish more with less,
and preserve resources for future generations. We have a unique willingness to
develop new technology, the confidence to revise proven designs, and the ability
to deliver results with every new installation.

Willis Carrier was the company’s earliest
sustainability leader. Utilizing precise
cooling processes, his invention would enable
countless industries to avoid waste and
preserve resources for future generations.

Above all, we will never rest on our accomplishments,
but instead consistently look for ways to improve—
our products, our environment and our world.
Willis wouldn’t have it any other way.

Table of Contents

HVAC Theory Training

Controls Training

ABCs of Air Conditioning............................................................ 4
GTAC 1 Air Conditioning (Basic Theory)..................................... 4
GTAC 2 Air Conditioning (Applied).............................................. 5
GTE Electricity (Basic Theory)..................................................... 6
GTH Heating.............................................................................6-7
Basic Refrigeration Cycles.......................................................... 7
Inside the Heat Pump.................................................................. 7
A Guide for Residential Heat Pumps........................................... 7

Control Skills............................................................................. 16

Servicing Skills
HVAC Service Handbooks.......................................................... 8
NATE............................................................................................ 8
Service Six Pack 1 and 2............................................................ 9
Cooling Skills Programs............................................................ 10
Heating Skills Programs............................................................ 10
Troubleshooting Series.............................................................. 11
Standard Service Techniques.................................................... 11
Computer-Based Training......................................................... 12

Equipment Training ........................................................... 13

Design Training
Technical Development Programs........................................17-22
Residential Design Guides........................................................ 23
Carrier System Design Manual.................................................. 24
Process Refrigeration................................................................ 25
Engineering Guides..............................................................25-26
Engineering Forms.................................................................... 26
Engineering Charts...............................................................27-28
Engineering Software................................................................ 28

General Training Materials
Professional Development........................................................ 29
Award Certificates..................................................................... 29
Tools, Rules, Pocket Cards, etc................................................ 29

Ordering
Ordering Information................................................................. 30
Order Form................................................................................ 31

General Service Training
Servicing Compressors............................................................. 14
Safety Training........................................................................... 15
Indoor Air Quality....................................................................... 15

Carrier University, PO Box 4808, Syracuse, NY 13221-4808 | 800-644-5544 | www.carrieruniversity.com

HVAC Theory Training
ABCs of Air Conditioning
The ABCs of Air Conditioning is one of several introductory training
courses on the basics of HVAC systems. This training course has
two major parts. Part 1 has four sections that describe the basic
principles of air conditioning systems. In the first section of Part 1
it describes how the ambient environment influences human body
comfort. The next section covers the air cycle and how air is used to
deliver and maintain comfort. The last two sections of Part 1 cover
the refrigeration cycles used to control temperature and humidity. Part
2 covers the types of equipment used in residential and commercial
buildings to control comfort conditions. The course is intended for
new technicians, sales representatives and other people desiring a
better understanding of HVAC topics.
NEW USB (GT16-04)....................................... 06-020-419............ 50.00
NEW Book (GT16-03)...................................... 06-020-410............ 15.00

GTAC 1 Air Conditioning (Basic Theory)
Introduction to Air Conditioning (GTAC1-1)
A basic introduction assuming no previous knowledge of the subject
matter. Explains HVAC terminology and basic concepts. The Instructor
package includes PowerPoint presentation, narrated self-study with
animations, and testing.
Book Only (GTAC1-101)..................................... 022-001................... 7.75
†
CD-ROM (GTAC1-1CD)..................................... 022-040................. 50.00
NEW Book (GTAC-1S)...................................... 06-022-051.............. 7.75
NEW Instructor Packet (GTAC-1IG).................. 06-022-052............ 50.00

Temperature and Pressure (GTAC1-2)
Covers heat transfer and temperature/pressure relationships.
Introduces the Ph (pressure enthalpy) chart. The Instructor package
includes PowerPoint presentation, narrated self-study with animations,
and testing.
Book Only (GTAC1-102)..................................... 022-003................... 7.75
†
CD-ROM (GTAC1-2CD)..................................... 022-041................. 50.00
NEW Book (GTAC-2S)...................................... 06-022-053.............. 7.75
NEW Instructor Packet (GTAC-2IG).................. 06-022-054............ 50.00

The Refrigeration Cycle (GTAC1-3)
Introduces the function of major components and shows how these
components work together to constitute the refrigeration system.
Book Only (GTAC1-103)..................................... 022-005................... 7.75
†
CD-ROM (GTAC1-3CD)..................................... 022-042................. 50.00

Systems (GTAC1-4)
Describes various types of systems along with the compressor/
condenser and evaporator curves.
Book Only (GTAC1-104)..................................... 022-007................... 7.75
†
CD-ROM (GTAC1-4CD)..................................... 022-043................. 50.00

Compressors (GTAC1-5)
Basic types of compressors are introduced, stressing their
construction, function, and capacity.
Book Only (GTAC1-105)..................................... 022-009................... 7.75
†
CD-ROM (GTAC1-5CD)..................................... 022-044................. 50.00

Condensers (GTAC1-6)
Covers operation of condensers within the refrigeration system,
condenser capacity and how condenser problems relate to
system troubleshooting.
Book Only (GTAC1-106)..................................... 022-011................... 7.75
†
CD-ROM (GTAC1-6CD)..................................... 022-045................. 50.00

Evaporators (GTAC1-7)
Basic evaporation process is studied. Particular attention is devoted
to the process’s relationship to the Ph chart.
Book Only (GTAC1-107)..................................... 022-013................... 7.75
†
CD-ROM (GTAC1-7CD)..................................... 022-046................. 50.00

Metering Devices (GTAC1-8)
Covers the specifics of modulating and fixed orifice refrigerant control.
Shows the expansion process and superheat control within the
refrigeration cycle.
Book Only (GTAC1-108)..................................... 022-015................... 7.75
†
CD-ROM (GTAC1-8CD)..................................... 022-047................. 50.00

Electrical & Refrigerant Controls (GTAC1-9)
Introduces the operation and function of basic switches and loads
in control and power circuits. Refrigerant flow controls are also covered.
Book Only (GTAC1-109)..................................... 022-017................... 7.75
†
CD-ROM (GTAC1-9CD)..................................... 022-048................. 50.00

Refrigeration Cycle Accessories (GTAC1-10)
Refrigerant system options and accessories are explained. Benefits
of these options in terms of enhanced system operation, ease of
installation and servicing, and user convenience are stressed.
Book Only (GTAC1-110)..................................... 022-019................... 7.75
†
CD-ROM (GTAC1-10CD)................................... 022-049................. 50.00

GTAC-1 Book
Bound copy contains one each of the GTAC-1 books listed here,
Modules 1 through 10.
Book Only (GTAC1-BK)...................................... 022-025................. 58.75

Bundle of 10 CD-ROM Presentations (PowerPoint)
Contains one each of the GTAC-1 CD-ROM presentations listed
here, Modules 1 through 10.
†
Set of 10 CD-ROMs (GTAC1-CD)....................... 022-024............... 500.00

CDs will be converted to
USB drives during 2018.
Check website for media type.

www.CarrierUniversity.com.
CD-ROM or USB contains a PowerPoint presentation which is editable and can be used for instructor-led instruction. Many contain a self-paced
version with audio which can be used for individual instruction. Both versions will work with Windows 7 products but this version may not work on
some Apple products. To get a version which can be used on learning management systems (LMS) contact www.carrieruniversity.com

†

GTAC 2 Air Conditioning (Applied)
Refrigerant Characteristics (GTAC2-1A)
Discusses refrigerant types, characteristics, and oil compatibility
of pure azeotropes, and zeotrope blends. It focuses on proper
application and safe handling for new, replacement refrigerants
used in air conditioning and refrigeration systems.
Book Only (GTAC2-101A)................................... 022-131................... 7.75
†
CD-ROM (GTAC2-1CD)..................................... 022-080................. 50.00

Refrigerant Oils (GTAC2-2A)
Covers oils used in air conditioning systems and how they are
properly applied. Includes compatibility with new, replacement
refrigerants and changeout procedures.
Book Only (GTAC2-102A)................................... 022-133................... 7.75
†
CD-ROM (GTAC2-2CD)..................................... 022-081................. 50.00

Refrigerant Piping (GTAC2-3)
Familiarizes you with enough detail to spot and modify obvious
field piping errors. Topics covered are piping requirements, sizing,
insulation, and support and piping loops.
Book Only (GTAC2-103A)................................... 022-105................... 7.75
†
CD-ROM (GTAC2-3CD)..................................... 022-082................. 50.00

Troubleshooting (GTAC2-9)
Introduces basic refrigeration system troubleshooting. Study diagnostic
tools along with troubleshooting, logic, information, and charts.
Book Only (GTAC2-109)..................................... 022-117................... 7.75
†
CD-ROM (GTAC2-9CD)..................................... 022-088................. 50.00

GTAC Troubleshooter
This diagnostic tool helps isolate common residential problems
quickly and incorporates both the Basic Symptom Analysis and
Refrigerant-side Troubleshooting form used in GTAC-9.
Diagnostic Tool (GTAC2-TS)............................... 022-050................... 8.00

GTAC-2 Book
Bound copy contains one each of the GTAC-2 Books listed here,
Modules 1 through 9.
Book only (GTAC2-BK)....................................... 022-125................. 58.75

Bundle of 9 CD-ROM Presentations (PowerPoint)
Contains one each of the GTAC-2 CD-ROM presentations listed
here, Modules 1 through 9.
†
Set of 9 CD-ROMs (GTAC2-CD)......................... 022-089............... 500.00

System Dehydration (GTAC2-4)
Discusses moisture problems and their effect on air conditioning
systems, and the importance of moisture elimination during evacuation.
Book Only (GTAC2-104)..................................... 022-107................... 7.75
†
CD-ROM (GTAC2-4CD)..................................... 022-083................. 50.00

Charging, Recovery, Recycling and Reclamation
(GTAC2-5A)
Explains how to charge, recover and recycle traditional and
replacement halocarbon refrigerants. It also focuses on tools and
equipment used.
Book Only (GTAC2-105A)................................... 022-139................... 7.75
†
CD-ROM (GTAC2-5CD)..................................... 022-084................. 50.00

Installation Procedures (GTAC2-6)
All facets of refrigeration system installation are covered including
planning, piping, brazing, wiring, pump down, prestart checks, and
start-up and safety essentials.
Book Only (GTAC2-106)..................................... 022-111................... 7.75
†
CD-ROM (GTAC2-6CD)..................................... 022-085................. 50.00

Covers the overall concept of the heat pump, its operation, benefits
and disadvantages, operating economics, servicing concerns
and how water-source heat pumps are used for heat reclaim in
commercial buildings.
Book Only (GTAC2-107)..................................... 022-113................... 7.75
†
CD-ROM (GTAC2-7CD)..................................... 022-086................. 50.00

Part Load (GTAC2-8)
Operating problems often show up at part load rather than at full
capacity. These are the problems on which this module focuses,
concentrating on the refrigeration cycle.
Book Only (GTAC2-108)..................................... 022-115................... 7.75
†
CD-ROM (GTAC2-8CD)..................................... 022-087................. 50.00

An online version is available.
Go to website and find under Training, Online.

www.CarrierUniversity.com.
CDs will be converted to
USB drives during 2018.
Check website for media type.

www.CarrierUniversity.com.

Carrier University, PO Box 4808, Syracuse, NY 13221-4808 | 800-644-5544 | www.carrieruniversity.com

HVAC Theory Training

Heat Pumps (GTAC2-7)

HVAC Theory Training
Alternating Current Fundamentals (GTE2-6)
Expands on basic AC concepts covered in Modules 1 and 2 as the
basis for understanding AC motors and AC power. Covers basic
concepts of motors and generators, capacitors, phase shift, and
power distribution systems.
Book Only (GTE2-106)....................................... 022-211................... 7.75
†
CD-ROM (GTE2-6CD)....................................... 022-255................. 50.00

Motor Fundamentals and Motor Protection (GTE2-7)
Covers basic theory and operation of common single-phase and
three-phase AC induction motors, including motor starting circuits.
Describes the various types of protective devices used with motors.
Book Only (GTE2-107)....................................... 022-213................... 7.75
†
CD-ROM (GTE2-7CD)....................................... 022-256................. 50.00
NEW Student Book*

GTE Electricity (Basic Theory)
Introduction to Electricity (GTE2-1)
Introduces electrical terminology and basic concepts to students
with limited knowledge of electricity. Covers Ohm’s Law, power,
series and parallel circuits. The Instructor package includes
PowerPoint presentation, narrated self-study with animations,
and testing.
Book Only (GTE2-101)....................................... 022-201................... 7.75
†
CD-ROM (GTE2-1CD)....................................... 022-250................. 50.00
NEW Student Book (GTE-1S)........................... 06-022-270.............. 7.75
NEW Instructor Packet (GTE-1IG)..................... 06-022-271............ 50.00

Electrical Components and Their Symbols (GTE2-2)
Introduces basic AC, magnetism, and common electrical components.
Begins the coverage of wiring diagrams and their symbols by
constructing a very basic circuit diagram.
Book Only (GTE2-102)....................................... 022-203................... 7.75
†
CD-ROM (GTE2-2CD)....................................... 022-251................. 50.00
NEW Student Book (GTE-2S)*......................... 06-022-272 ............. 7.75

Electronic Devices and Circuits (GTE2-8)
Discusses basic concepts, packaging, and troubleshooting
of electronic circuits used in comfort air conditioning. Covers
semiconductors, timing and sensing devices, and the use of
microprocessor controls in comfort applications.
Book Only (GTE2-108)....................................... 022-215................... 7.75
†
CD-ROM (GTE2-8CD)....................................... 022-257................. 50.00

Electrical Troubleshooting (GTE2-9)
Describes and illustrates techniques for troubleshooting electrical
and electronic circuits with a focus on control circuits and motors.
Book Only (GTE2-109)....................................... 022-217................... 7.75
†
CD-ROM (GTE2-9CD)....................................... 022-258................. 50.00

GTE2 Book
Bound copy contains one each of the GTE2 Books listed here,
Modules 1 through 9.
Book Only (GTE2-BK)......................................... 022-225................. 58.75

Bundle of 9 CD-ROM Presentations (PowerPoint)
Contains one each of the GTE2 CD-ROM presentations listed here,
Modules 1 through 9.
†
Set of 9 CD-ROMs (GTE2-CD)........................... 022-259............... 500.00

Wiring Diagrams (GTE2-3)
Discusses safety practices and introduces additional electrical
components. Step-by-step construction of a simplified wiring
diagram; covering power, control, and load circuits for a typical
packaged air conditioner with electric heat.
Book Only (GTE2-103)....................................... 022-205................... 7.75
†
CD-ROM (GTE2-3CD)....................................... 022-252................. 50.00
NEW Student Book (GTE-3S)*......................... 06-022-274 ............. 7.75

Wiring Diagram Exercises (GTE2-4)
Covers step-by-step construction of a wiring diagram for a heat
pump to teach more advanced diagram-reading skills and control
circuit concepts.
Book Only (GTE2-104)....................................... 022-207................... 7.75
†
CD-ROM (GTE2-4CD)....................................... 022-253................. 50.00

Electric Meters and Their Uses (GTE2-5)
Discusses the construction of various types of meters and explains
their applications. Sample problems illustrate the use of meters in
electrical troubleshooting and testing.
Book Only (GTE2-105)....................................... 022-209................... 7.75
†
CD-ROM (GTE2-5CD)....................................... 022-254................. 50.00

GTH Heating
Introduction to Gas Heating (GTH2-1)
Introduces students to four of eight foundation blocks of heating:
1) Heat; 2) Molecules, Heat and Temperature; 3) Heat Transfer;
4) Pressure.
Book Only (GTH2-101)...................................... 022-301................... 7.75
†
CD-ROM (GTH2-1CD)....................................... 022-340................. 50.00

Principles of Gas Combustion (GTH2-2)
Introduces the remaining four foundation blocks of heating:
5) Gas Properties; 6) Combustion Theory; 7) Practical Combustion;
and 8) Efficiency.
Book Only (GTH2-102)...................................... 022-303................... 7.75
†
CD-ROM (GTH2-2CD)....................................... 022-341................. 50.00

*New student books are part of an updated program and do not follow the CD.
CD-ROM or USB contains a PowerPoint presentation which is editable and can be used for instructor-led instruction. Many contain a self-paced
version with audio which can be used for individual instruction. Both versions will work with Windows 7 products but this version may not work on
some Apple products. To get a version which can be used on learning management systems (LMS) contact www.carrieruniversity.com

†

Students learn basic furnace design, gas system components,
furnace controls, and system controls and components.
Book Only (GTH2-103)...................................... 022-305................... 7.75
†
CD-ROM (GTH2-3CD)....................................... 022-342................. 50.00

Gas Burners (GTH2-4)
Expands on basic concepts. Includes: theoretical flame characteristics;
burner design; actual flame characteristics; combustion system; and
pilot burners.
Book Only (GTH2-104)...................................... 022-307................... 7.75
†
CD-ROM (GTH2-4CD)....................................... 022-343................. 50.00

Gas Controls (GTH2-5)
Focuses on controlled combustion process: gas controls; manual and
automatic valves; and gas regulators.
Book Only (GTH2-105)...................................... 022-309................... 7.75
†
CD-ROM (GTH2-5CD)....................................... 022-344................. 50.00

Gas Ignition Systems (GTH2-6)
Explains the three types of ignition systems commonly used: standing
pilot; re-ignition pilot; and direct burner ignition.
Book Only (GTH2-106)...................................... 022-311................... 7.75
†
CD-ROM (GTH2-6CD)....................................... 022-345................. 50.00

Gas Safety & Operating Controls (GTH2-7)
Covers basic theory and operation of common safety controls,
operating controls, and system controls used in gas furnaces.
Book Only (GTH2-107)...................................... 022-313................... 7.75
†
CD-ROM (GTH2-7CD)....................................... 022-346................. 50.00

Furnace Installation Practices (GTH2-8)
Students learn application principles: planning; designing; and
selecting equipment, as well as proper gas-piping techniques
and installation practices.
Book Only (GTH2-108)...................................... 022-315................... 7.75
†
CD-ROM (GTH2-8CD)....................................... 022-347................. 50.00

Ventilation & Combustion Air (GTH2-9)
Introduces terminology of Category I vent design basics, vent design
and combustion air, as well as Category IV venting and combustion air.
Book Only (GTH2-109)...................................... 022-317................... 7.75
†
CD-ROM (GTH2-9CD)....................................... 022-348................. 50.00

Gas Troubleshooting (GTH2-10)
Covers basic troubleshooting practices. Covers: basic adjustments;
gas input; primary air; efficiency checks; furnace problems; how to
identify and correct the operation and function of basic switches
and loads.
Book (GTH2-110).............................................. 022-319................... 7.75
†
CD-ROM (GTH2-10CD)..................................... 022-349................. 50.00

GTH-2 Book
Bound copy contains one each of the GTH Books listed here,
Modules 1 through 10.
Book only (GTH2-BK)......................................... 022-325................. 58.75

Bundle of 10 CD-ROM Presentations (PowerPoint)
Contains one each of the GTH CD-ROM presentations listed here,
Modules 1 through 10.
†
Set of 10 CD-ROMs (GTH2-CD)........................ 022-320............... 500.00

Basic Refrigeration Cycles
The Basic Refrigeration Cycles is one of several introductory training
courses on the basics of HVAC systems. This training course
describes the three basic types of vapor compression refrigeration
cycles; positive displacement, non-positive displacement and
absorption. The operation of the compression used in each cycle is
explained and where each type is typically applied. The compressor
types covered include scroll, reciprocating, rotary, screw and
centrifugal. The training also addresses single and double effect
absorption systems. The course is intended for new technicians, sales
representatives and other people desiring a better understanding of
HVAC topics.
Book (GT56-01A).............................................. 020-528................. 10.00
†
CD-ROM (GT56-03).......................................... 06-020-530............ 50.00
(This training program has options for self-study or classroom
facilitation of Basic Refrigeration Cycles. Student self-study section
includes skills checks, remediation, and testing. Instructor may
navigate through graphics and control the multimedia features
as required.)
NEW Refrigeration Cycle Flow Charts (full color 8.5 X 11)(set of 8 charts)
(GT56-08)......................................................... 06-020-536.......12.00/set
Direct Expansion Air Conditioner, Direct Expansion Heat Pump Heating Cycle,
Direct Expansion Heat Pump Cooling Cycle, Packaged Air Cooled Scroll Chiller,
Packaged Water Cooled Screw Chiller, Hermetic Water Cooled Centrifugal Chiller,
Water Cooled Single-Effect Absorption Chiller, Water Cooled Double-Effect
Absorption Chiller
NEW Refrigeration Cycle Posters (full color 24 X 30) (set of 8 posters)
(GT56-09)......................................................... 06-020-534.......15.00/set
Direct Expansion Air Conditioner, Direct Expansion Heat Pump Heating Cycle,
Direct Expansion Heat Pump Cooling Cycle, Packaged Air Cooled Scroll Chiller,
Packaged Water Cooled Screw Chiller, Hermetic Water Cooled Centrifugal Chiller,
Water Cooled Single-Effect Absorption Chiller, Water Cooled Double-Effect
Absorption Chiller

NEW SUMMER 2018 Basic Air Cycles
A complete air conditioning system must do more than cool the
air; it must also circulate, distribute, clean and purify the air as well.
These are the functions of the air cycle. This program covers the
basic principles of airside including properties of air, air conditioning
processes and airside systems, fans and fan laws, filtration, and
heating and cooling coils. In addition, basic concepts of air distribution
and duct systems, including ventilation basics, are covered. At the
end of this program a student will have a better understanding of
airside principles and terminology and be better equipped to analyze
and troubleshoot airside problems.
NEW Book (GT67-01)...................................... 06-020-566............ 10.00
NEW USB (GT67-02)....................................... 06-020-567............ 50.00

Inside the Heat Pump
This program includes: theory of operation, components
and their function, selection and installation techniques.
Book (GT59-01)................................................. 020-537................. 10.00
†
CD-ROM (GT59-02CD)..................................... 020-539................. 50.00

A Guide for Residential Heat Pumps
Covers all aspects of residential heat pump installation including
load sizing, application and installation.
Book (GT14-01)................................................. 020-417................... 6.25

Carrier University, PO Box 4808, Syracuse, NY 13221-4808 | 800-644-5544 | www.carrieruniversity.com

HVAC Theory Training

Gas Furnaces (GTH2-3)

Servicing Skills
NATE Study Guides
Core Study Guide
Review of topics that will be covered in the NATE Core Tests. Core
topics include: electricity, including static electricity, simple circuits,
circuit parts, use of electrical meters, circuits, electromagnetism;
motors; piping; refrigeration; and customer relations.
Book................................................................................................. FREE

Air Conditioning Study Guide
Review of topics that will be covered in the NATE Air Conditioning
Tests. Air Conditioning topics include: temperature, humidity,
air circulation, thermodynamics, meters/gauges, compressors,
condensers, evaporators, superheat and subcooling.
Book................................................................................................. FREE

HVAC Service Handbooks
HVAC Servicing Procedures
No service vehicle should be without it! This rugged, 200-page bound
book is designed to be a handy, on-the-job reference. Printed on
specially coated wipe-clean paper, it includes four major sections:
Instruments and Devices; Safety; General Service Considerations;
and Service Procedures; plus a Full Glossary and set of Pressure
Temperature Charts. The USB version makes a great instructor’s
tool with its hypertext and features like quizzes and supplemental
reference charts.
Handbook (SK29-01A)....................................... 020-040................. 34.00
USB Drive Hypertext (SK29-01CD)..................... 020-039................. 50.00

Gas Furnace Study Guide
Review of topics that will be covered in the NATE Gas Furnace Tests.
Gas Furnace topics include: types of gas heating systems, gas valves,
venting, installation, BTU ratings, blower motors, electricity, limit
switches, duct construction, thermostat, start-up and checking a
gas heater, humidifiers, electric controls and draft.
Book................................................................................................. FREE

Heat Pump Study Guide
Review of topics that will be covered in the NATE Heat Pump Tests.
Heat Pump topics include: temperature, humidity, air circulation,
thermodynamics, meters/gauges, compressors, condensers,
evaporators, superheat and subcooling.
Book................................................................................................. FREE

HVAC Installation Procedures
Every HVAC installer should have this rugged, 200-page, on-the-job
reference book. Printed on specially coated paper, it includes sections
on hand and power tools, piping practices, electrical hook-ups and
duct installation. Additional sections cover installation of split systems,
furnaces, packaged heating and cooling products. Valuable start-up
and checkout sheets are included. The hypertext version on CD is
an excellent teaching tool and includes additional features such as
ductwork sizing, metric conversions, electrical symbols and more.
Handbook (SK32-01)......................................... 020-038................. 34.00
CD-ROM Hypertext (SK32-01CD)....................... 020-037................. 50.00

HVAC Maintenance Procedures Handbook
This reference rounds out our “procedures handbook” trilogy and
focuses on practical maintenance techniques. Features the same
rugged design as the earlier Servicing and Installation Procedures
volumes and is intended to serve as an on-the-job reference.
The book’s eight sections include well-illustrated, step-by-step
maintenance information in the following areas: Preventive, Safety,
General, Electrical, Gas Furnace, Oil Furnace, Split and Packaged
System and Accessories maintenance.
Handbook (SK35-01)......................................... 020-093................. 34.00
CD-ROM Hypertext (SK35-01CD) ...................... 020-094................. 50.00

Free download at www.CarrierUniversity.com

An online NATE Core Prep Class is also available.
Go to website and find under Training, Online.

www.CarrierUniversity.com.
Study Guides are included with class tuition.

CDs will be converted to
USB drives during 2018.
Check website for media type.

www.CarrierUniversity.com.

CD-ROM or USB contains a PowerPoint presentation which is editable and can be used for instructor-led instruction. Many contain a self-paced
version with audio which can be used for individual instruction. Both versions will work with Windows 7 products but this version may not work on
some Apple products. To get a version which can be used on learning management systems (LMS) contact www.carrieruniversity.com

†

Service Six Pack 1

Service Six Pack 2

One DVD with each of the six basic service skills titles listed below.
DVD (SK20-06DVD)........................................... 020-394............... 150.00

One DVD with each of the six basic service skills titles listed below.
DVD (SK7-06DVD)............................................. 020-392............... 150.00

Metering Devices

Follows a practical step-by-step path through
the complexities of today’s electrical circuitry.
Graphic and easy-to-grasp, the materials
teach the skills needed to find and correct
electrical system problems.
Book (SK14-01).......... 020-057................... 5.25
†
CD-ROM (SK14-02CD)
.................................. 020-625................. 50.00

Three modern metering devices are shown operating in an air
conditioning system. Includes common usage problems and
troubleshooting situations.
Book (SK1-01)................................................... 020-473................... 5.25
†
CD-ROM (SK1-02CD)....................................... 020-631................. 50.00

Residential Condensing Unit Replacement
Replacement skills are a must for profitably tapping today’s growing
replacement market. This program graphically shows the steps for
successfully replacing a residential condensing unit.
Book (SK15-01)................................................. 020-059................... 5.25
†
CD-ROM (SK15-02CD)..................................... 020-626................. 50.00

Hermetic Compressor Replacement
First, the technician learns how to determine if the compressor has
failed, and then he is taken, step-by-step, through a successful
replacement procedure. Additionally, start-up and checkout of the
system is included.
Book (SK16-01)................................................. 020-061................... 5.25
†
CD-ROM (SK16-02CD)..................................... 020-627................. 50.00

Brazing
Brazing is a primary skill for a successful service technician. This
module covers the basics of solder alloy types, heat ranges and
fuels needed, along with equipment care and safety tips.
Book (SK17-01)................................................. 020-063................... 5.25
†
CD-ROM (SK17-02CD)..................................... 020-628................. 50.00

Evacuation and Charging
Often, experienced as well as beginning service personnel do not
understand the technique of evacuation and charging. This module
shows how to properly evacuate a system. Two methods of charging
are presented, as well.
Book (SK18-01)................................................. 020-065................... 5.25
†
CD-ROM (SK18-02CD)..................................... 020-629................. 50.00

Air Measurement

Add-On Air Conditioning Installation
This program shows how to install an “Add-On” split system air
conditioner. A natural enhancement to the training found in 6-Pack 1.
Book (SK2-01)................................................... 020-475................... 5.25
†
CD-ROM (SK2-02CD)....................................... 020-632................. 50.00

Gas Furnace Replacement
Students learn how to remove and replace an existing gas furnace
with a mid-efficiency model. Emphasis is on start-up and checkout
of the new system.
Book (SK3-01)................................................... 020-477................... 5.25
†
CD-ROM (SK3-02CD)....................................... 020-633................. 50.00

Advanced Troubleshooting
This program builds on the training found in the Electrical
Troubleshooting 6-Pack 1 presentation. It takes the technician through
more complex problems using the proven hopscotch method.
Book (SK4-01)................................................... 020-479................... 5.25
†
CD-ROM (SK4-02CD)....................................... 020-634................. 50.00

Electrical Test Instruments
An overview of two of the most-used instruments in the technician’s
tool kit, the volt-ohmmeter and the clamp-on ammeter.
Troubleshooting situations are emphasized.
Book (SK5-01)................................................... 020-481................... 5.25
†
CD-ROM (SK5-02CD)....................................... 020-635................. 50.00

Air Conditioning Tune-Up
Here we cover the steps required to check out and tune up an air
conditioning system. These skills will be highly useful in this growing
segment of service/maintenance business.
Book (SK6-01)................................................... 020-483................... 5.25
†
CD-ROM (SK6-02CD)....................................... 020-636................. 50.00

Improper airflow often causes comfort
system problems. Here, technicians are
shown how to measure airflow using the
heat rise method. They will gain the skills
necessary to successfully troubleshoot
system problems.
Book (SK19-01).020-067................... 5.25
†
CD-ROM (SK19-02CD)
......................................................................... 020-630................. 50.00

CDs will be converted to
USB drives during 2018.
Check website for media type.

www.CarrierUniversity.com.

Carrier University, PO Box 4808, Syracuse, NY 13221-4808 | 800-644-5544 | www.carrieruniversity.com

Servicing Skills

Electrical Troubleshooting

Servicing Skills
Cooling Skills Programs
Metering Devices – Fixed-Orifice and TXV
This training supports Carrier’s residential platform of products that
use TXV metering devices in all evaporator furnace coils and fan coils.
This training will explain how the metering device operates in an air
conditioning system and how the TXV with its variable orifice is able to
provide superior system performance.
Book (GT-100).........................................................06-C20-641........ 7.75
CD-ROM PowerPoint™ Presentation with Audio (GT-100CD)
......................................................................... 06-C20-642............ 50.00

Charging Procedures for Residential Condensing Units
Covers superheat and subcooling charging methods and procedures
for correct system airflow using the Superheat/Subcooling Charging
Calculator/Slide Rule.
Book (SK28-01)................................................. 020-122................. 12.50
Superheat/Subcooling Charging Calculator/Slide Rule (HCFC-22 only)
(GT24-01)......................................................... 020-434.................. 4.00

Proper Condensate Drain Connections
Prevent stained ceilings and ruined furniture caused by backedup condensate water. Shows how to prevent and eliminate these
problems by understanding why they occur, dimensions for drain
trap, as well as do’s and don’ts of installing condensate drains.
DVD (PCD-02DVD)............................................. 020-263................. 37.50

Leak Testing Residential and Light Commercial
Refrigeration Systems
This basic skills program covers equipment and techniques used
to perform refrigerant leak testing in residential and light commercial
refrigerant equipment. Safety, environmental and economic concerns
are stressed throughout.
Book (SK34-01) ................................................ 020-095................... 7.75
CD-ROM Slide Presentation (SK34-02CD).......... 020-097................. 50.00

Rooftop Operation and Maintenance
Designed to guide building owners and operators through the
service and maintenance requirements of packaged heating and
cooling systems 3 tons and up. Identifies common problems and
stresses planned maintenance and maintenance scheduling.
Covers Application and Operation, Installation Pitfalls, Maintenance
Schedules and Maintenance functions the owner/operator will
perform and Maintenance functions an air conditioning service
company will perform.
Book (GT60-01)................................................. 020-540................... 7.75
†
CD-ROM PPT (GT60-02CD).............................. 020-542................. 50.00

Rooftop Economizers
Covers different types of economizers and their operation,
including the functions of their motors, dampers, and controls.
Book (GT44-01)................................................. 020-504................... 7.75
†
CD-ROM (GT44-02CD) .................................... 020-244................. 50.00

Rooftop Air Test & Balance
Covers the basics of air balancing for constant volume systems, a
look at tools and instruments commonly used and follows through
a typical balancing procedure.
Book (GT46-01) ......................................................020-508.............. 7.75

Leak Testing Liquid Chillers- Reciprocating, Centrifugal
and Absorption
Increase awareness of equipment and techniques used to perform
refrigerant leak testing in applied equipment. Safety, environmental
and economic concerns are stressed. Includes: Importance of
leak detection & repair; monitoring equipment; and leak testing
waterside components.
Book (SK33-01) ................................................ 020-079................... 7.75
†
CD-ROM (SK33-02CD)..................................... 020-080................. 50.00

Heating Skills Programs
Condensing Furnace Installation, Start-Up & Checkout
This program takes technicians through various aspects of condensing
furnace installation from initial survey of the job, the actual installation
and the all-important start-up and checkout procedures.
Book (SK31-01) ......................................................020-076............ 12.50

Clocking a Gas Meter
“Clocking” the meter is one of the more commonly used methods for
determining if a furnace or any gas-fired appliance is delivering its full
rated input. This video shows how to perform this procedure.
DVD (SK36-02DVD)........................................... 020-264................. 37.50

Measuring Flame-Sensing Current
Modern gas furnaces use the principle of flame rectification to
determine if there is an adequate burner flame for safe operation.
This video shows how to determine if the flame-sensing circuits
are operating correctly.
DVD (SK37-02DVD).................................................020-265............ 37.50

Hydronic Heating Systems
Use to plan, size, lay out and install a hydronic heating system in
residential and light commercial applications.
Book (GT31-01)................................................. 020-454................... 7.00

Oil Heat
This program covers aspects of oil heat technology that are of
interest to persons who install and service oil-fired residential heating
products. After an introduction section, oil combustion fundamentals
and oil burners are covered. Oil heating system topics include fuel
supply systems and proper venting. A section on annual maintenance
emphasizes the use of an annual maintenance checklist, which is
provided. The troubleshooting section covers commonly encountered
system problems.
Book (GT57-02)................................................. 020-535................. 10.00
†
CD-ROM (GT57-01CD)..................................... 020-527................. 50.00

NEW SUMMER 2018

Troubleshooting the Economizer
Covers procedures for troubleshooting economizers and a brief
review of operation of the major components and controls.
Book (GT45-01A) ............................................. 020-506................... 7.75
USB Drive (GT45-01USB) ................................. 06-020-529............ 50.00

CDs will be converted to
USB drives during 2018.
Check website for media type.

www.CarrierUniversity.com.

†

Troubleshooting Series

Standard Service Techniques

Troubleshooting Residential Cooling Systems

Absorption Book

Covers common problems encountered with residential cooling
systems and how to correct them.
Book (SK22-01).......................................................020-107............ 15.00
†
CD-ROM (SK22-02CD)...........................................020-124............ 50.00

Leak Testing, Evacuation, Charging and Refrigerant Sampling.
(SM-16)............................................................ 594-217................... 6.00

Troubleshooting Heat Pumps
(Residential-Light Commercial)
Covers preliminary inspection, insufficient air, improper defrost,
excessive electrical consumption, proper refrigerant charge and
special components.
Book (SK24-01) ................................................ 020-111................. 15.00
†
CD-ROM (SK24-02CD)..................................... 020-129................. 50.00

Troubleshooting Furnaces
Covers common problems encountered with gas furnaces and
how to correct them.
Book (SK23-01)................................................. 020-109................. 15.00
CD-ROM (SK23-02CD)...................................... 020-128................. 50.00

Troubleshooting Rooftops
Helps technicians to troubleshoot rooftop units and to identify
common problems. Use of a maintenance log and diagnostic
trend chart is stressed to help technicians recognize abnormal
operating conditions.
Book (SK27-01)................................................. 020-125................. 15.00
†
CD-ROM (SK27-02CD)..................................... 020-127................. 50.00

Air Properties and Measurement
Analyzes and defines the properties of air, illustrates use of a
psychrometric chart, discusses air measurement procedures and
instruments, reviews fan laws and airflow calculations to solve
air side problems.
Book (SST-03A)................................................. 020-253................... 9.00
†
CD-ROM (SST-04APP)...................................... 020-211................. 50.00

Centrifugal Compressor Book
Foundation Preparation, Installing, Alignment and Grouting.
(SM-15B).......................................................... 594-218................... 3.00

Refrigerant Service Techniques
Covers: refrigerants, safety, minimizing contamination of systems,
management and containment systems, charging tools and
equipment, and service procedures used on centrifugal and
reciprocating refrigeration equipment.
Book (SST-01)................................................... 020-650................. 10.25

Troubleshooting (Semi-Hermetic) Compressors
and Systems
Describes 3-step approach to determining interrelated compressor
and system problems. Relates pressure, temperature and electrical
readings to possible problems.
Book (SK25-01)................................................. 020-113................. 15.00
†
CD-ROM (SK25-02CD)..................................... 020-132................. 50.00

Troubleshooting Reciprocating Liquid Chillers

CDs will be converted to
USB drives during 2018.
Check website for media type.

www.CarrierUniversity.com.

Carrier University, PO Box 4808, Syracuse, NY 13221-4808 | 800-644-5544 | www.carrieruniversity.com

Servicing Skills

Presents typical chiller operation, operation checks, symptoms of
common problems, troubleshooting examples and exercises.
This advanced program assumes the student has an understanding
of basic principles of chiller operation. It features a typical job
visit and use of a maintenance log to compare design temperatures
to actual system readings.
Book (SK26-01A).............................................. 020-115................. 15.00
Maintenance Log (Pad of 25) (SK26-03A).......... 020-117............ 7.50/pad
†
CD-ROM (SK26-02CD)..................................... 020-133................. 50.00

Servicing Skills
Computer-Based Training
HVAC Performance PLUS Simulator
Replace costly, old-fashioned mechanical trainers with this exciting,
state-of-the-art interactive computer simulation of an air conditioning
system. Configure the system the way you want it by changing the
type of compressor or metering device, or the system tonnage.
Change ambient conditions and system-operating parameters, then
observe, record, and compare the effects on system temperatures,
pressures, efficiencies, refrigerant states, and power consumption.
System responses can be shown and printed using pressure/enthalpy
(Ph) graphing and data tables. Contains a narrated introduction to the
simulator itself, including program features, navigation, suggested
uses, and additional training resources. Includes one student
workbook containing exercises with suggested inputs to simulate
system responses in certain conditions. An outstanding teaching aid
for instructors and a valuable learning tool for students from entrylevel to experienced technician. Also includes two FREE simulated
interactive service calls, testing the student’s ability to diagnose and
correct mechanical and electrical circuit malfunctions. Additional
Performance PLUS Troubleshooting CD’s are available. (020-547).
This program is not compatible with Windows® 8 or higher.
Performance PLUS Simulator CD-ROM (GT65-03A)
......................................................................... 020-546............... 350.00
Student Workbooks (GT65-O1).......................... 020-549................. 15.00

The HVAC Performance PLUS Troubleshooting Practice Series
offers students the ability to refine their troubleshooting skills. CD
contains practice sessions with a selection of 11 real-life service
problems where students use a virtual toolbox to diagnose and
correct mechanical refrigeration cycle, air system or electrical circuit
malfunctions. Student progress is monitored and recorded
as they progress through each troubleshooting scenario. Ideal for
self-study or classroom instruction. This program is not compatible
with Windows® 8 or higher.
Series 1 CD-ROM with Instructor Guide (GT69-01A)
......................................................................... 020-547................. 50.00

†

HVAC Performance PLUS Troubleshooting Practice

Equipment Training
Residential Split Systems Products

Residential Control System

25VNA Infinity Variable Speed Heat Pump Unit

SYSTXCC Infinity® Touch Control

Training covers 25VNA high-efficiency heat pump with Greenspeed
Intelligence. Covers familiarization, controls, operation, start-up,
maintenance and troubleshooting.
Book (25VNA-01).............................................. 06-C20-665........... .11.50
†
CD-ROM (25VNA-02CD)................................... 06-C20-666............ 50.00

This training introduces Carrier’s industry-leading new Infinity™;
Touch User Interface (UI) residential control. Controls include a
touch-screen User interface that replaces the previous push button
Infinity™ User Interface.
Book (SYSTXCC-01A)........................................ 06-C20-683............ 15.00
†
CD-ROM (SYSTXCC-02-CD).............................. 06-C20-684............ 50.00

™

Rooftop Units
48/50HC,TC and 50TCQ Small Rooftop Units
Training covers the 48/50 HC high-efficiency family and 48/50 TC and
50TCQ standard-efficiency family of small rooftop products.
Book (48/50HC,TC-01....................................... 06-C24-888............ 12.50
†
CD-ROM (48/50HC,TC-02-CD)......................... 06-C24-889............ 50.00

48/50 HC,HG,PD,PG,PM Rooftop Units ComfortLink
Control Systems V5.0
24VNA9 and 25VNA8 Infinity® Cooling and
Heat Pump Outdoor Units
This service-training program covers Carrier’s Infinity® 19VS air
conditioner model 24VNA9 and Infinity® 18VS high-efficiency
heat pump condensing unit model 25VNA8. These units feature
variable-speed rotary compressors driven by a variable-speed drive.
They can use either the Infinity® Touch communicating controls for
full variable speed functionality, or a standard, 2-stage or singlestage thermostat, for limited functionality. The program covers
familiarization, controls and hardware, start-up and configuration,
service, maintenance, and troubleshooting.
Book (24/25VNA-01)......................................... 06-C24-028........... .11.50

This program covers the ComfortLink Control System Version 5.0 and
explains how to use the scrolling marquee interface to start up, configure,
and troubleshoot Carrier 48 and 50HC, HG, PD, PG and PM units. This
program covers these rooftop products in sizes from 3 through 25 tons
as cooling only and cooling with gas or electric heat. This program on the
ComfortLink Control System Version 5.0 presents the necessary training
for a technician to become familiar with the control system, access the
control menus and configure the rooftop product, access and verify
or input setpoints, understand the controls operation, perform the test
routine and troubleshoot the unit with the controls.
Book (48/50PG/HC/HG-01)................................ 06-024-890............ 11.50
CD-ROM PPT (48/50PG/HC/HG-01).................... 06-024-891............ 50.00

Residential Application Guide
This training covers the 24 series air conditioners and 25 series heat
pumps, their nomenclature and features for each of their 4 tiers:
Base, Comfort, Performance and Infinity, so that you can design and
sell them. It is designed to teach you how to select the system type,
component style and tier for each product used in Carrier cooling or
heat pump split system. Component sizing is included, as well as
long line design strategies and air system design guidelines.
Book (Appl-01).................................................. 06-C24-027........... .15.00

Furnaces
This training covers Carrier’s family of +90 AFUE induced combustion
furnaces. Topics include: familiarization, installation, start-up and
electrical operating sequences.
Book (59MN,TN,TP,SP,SC-01)............................ 06-025-868............ 11.50
†
CD-ROM (SK1-02CD)....................................... 06-025-869............ 50.00

CDs will be converted to
USB drives during 2018.
Check website for media type.

www.CarrierUniversity.com.

For product training information on older models
please contact Carrier University
Phone: 800-644-5544 Option 2
Email: carrierubookstore@carrier.utc.com

Carrier University, PO Box 4808, Syracuse, NY 13221-4808 | 800-644-5544 | www.carrieruniversity.com

Equipment Training

59MN,TN,TP,SP,SC Condensing Furnaces

General Service Training
Servicing Compressors
Compressors
Introduces basic compressor types, construction, function
and capacity.
Book (GTAC-105) .............................................. 022-009................... 7.75
†
CD-ROM (GTAC1-5CD)..................................... 022-044................. 50.00

Be Compressor Wise
Conditions for compressor change, changeout procedure and system
checkout procedure. Updated refrigerant-handling techniques.
Book (GTC19-101) ........................................... 020-257................... 7.75

Preventing Compressor Failures
Present the basics of Analyzing Compressor/Systems Problems.
Book (GTC4-101) ............................................. 020-490................... 7.75
†
CD-ROM (GTC-4PP).......................................... 020-412................. 50.00

Why Compressors Fail II
This program includes troubleshooting tips, and an analysis section on
semi-hermetic compressors.
Book (GTC2-101B) English Version.................... 020-346................... 9.50
Book (GTC2-101S) Spanish Version................... 020-327................... 9.50
†
CD-ROM (GTC-2BCD)....................................... 020-348................. 50.00

Clean-Up After Burnout
Identify mild or severe burnouts and prevent repeat failures by using
proper clean-up procedures. Updated refrigerant-handling techniques.
Book (GTC-18).................................................. 020-262................... 7.75
†
CD-ROM (GTC-18CD)....................................... 020-622................. 50.00

Scroll Compressors
Familiarization, Operation and Service of the most popular
compressors used in residential and light commercial units.
Book (GTC10-101)............................................ 020-514................... 7.75

Hermetic Compressor Replacement
First, learn how to determine if the compressor has failed; then,
take a step-by-step process to a successful compressor replacement.
Start-up and checkout of the system are included.
Book (SK16-01) ................................................ 020-061................... 5.25
†
CD-ROM (SK16-02CD)..................................... 020-627................. 50.00

Oil-Refrigerant Migration
Covers miscibility, rate of absorption and reducing oil dilution.
Book (GTA1-101)............................................... 020-241................. 10.25

Troubleshooting (Semi-Hermetic) Compressors
and Systems
Describes 3-step approach to determine interrelated compressor/
system problems. Relates pressure, temperature, and electrical
readings to possible problems.
Book (SK25-01)................................................. 020-113................. 15.00
†
CD-ROM (SK25-02CD)..................................... 020-132................. 50.00

Carlyle 5-Line Compressor
Describes Open Drive Teardown and Rebuild procedures.
Book (5F, H-01) ................................................ 020-502................... 7.75
CD-ROM PowerPoint with Audio (5F, H-02CD).... 020-615................. 50.00

Carlyle 06D, 06E, 06CC Semi-Hermetic Compressors
This popular program includes safety and troubleshooting tips for all
Carlyle semi-hermetic compressors.
Book (GTC3-101A) ........................................... 020-338................... 7.75
CD-ROM PowerPoint with Audio (GTC-3ACD)..... 020-340................. 50.00

Capacity Control Carlyle 5, 6 Line Compressors
Explains installation, operation and troubleshooting unloaders used
in semi-hermetic compressors.
Book (GTC1-101A) ........................................... 020-300................... 7.75
CD-ROM PowerPoint Presentation with Audio (GTC-1ACD)
......................................................................... 020-616................. 50.00

06D & 06E Compressor (Pocket) Service Guide
Handy reference includes model identification, service procedures,
parts and electrical data.
Book (06D-01).................................................. 020-611................... 4.25

Carlyle Semi-Hermetic Compressor Cutaways
Full-color compressor cutaways with callouts.
06D 8-1/2” x 11”, 4 color (GTC-15)................... 020-323.............. 2.50 /ea
06E 8-1/2” x 11”, 4 color (GTC-16)................... 020-324............ .2.50 /ea
06D & 06E Wall Charts 24” x 30” (GTC-17)....... 020-325............11.00/set

CDs will be converted to
USB drives during 2018.
Check website for media type.

www.CarrierUniversity.com.

†

Safety Training

Indoor Air Quality

Safety Guide for Refrigeration and
Air Conditioning Equipment

Indoor Air Quality Products and Fundamentals

Use to promote safety awareness for people who own, operate or
maintain refrigeration and air conditioning equipment.
Book................................................................. 571-100................... 4.00

Safety 2000
This program was produced by joint effort of Service Training and
Carrier Corporation’s EHS department and should be included in
your safety training objectives. It is designed to promote safety
awareness and provide a safer, healthier environment. It covers:
personal protective equipment, material safety data sheets (MSDS),
vehicle safety, emergency response, ergonomics, lifting and back
safety, hazard communication, electrical safety, ladders, working at
heights, fall protection, welding and brazing, compressed air and gas,
refrigerants, leak testing, environmental practices, good housekeeping
and confined space entry. Also safety practices needed to service:
reciprocating, air handlers, cooling towers, absorption, and centrifugal
equipment.

Emphasizes the “Control, Filter, Refresh” approach to residential IAQ.
It covers IAQ problems, product familiarization, equipment selection/
application, operation and general maintenance. The 10-minute
video compares various air filter media and equipment performance.
A PowerPoint player is included on the CD training presentation along
with an interactive ventilator search program.
Book................................................................. 020-606................... 9.00
†
CD-ROM (GT68-02).......................................... 020-607................. 50.00

CDs will be converted to
USB drives during 2018.
Check website for media type.

www.CarrierUniversity.com.

Carrier University, PO Box 4808, Syracuse, NY 13221-4808 | 800-644-5544 | www.carrieruniversity.com

General Service Training

This program provides a basic understanding of good safety practices
both on the job site or when using your service vehicle. You should
know why safety is your concern, what hazards to watch out for and
what safety precautions are required for each type of equipment.
Book (GT67-01)................................................. 020-602................... 9.00
†
CD-ROM (GT67-03).......................................... 020-604................. 50.00

Controls Training
Controls Skills
Understanding Wiring Diagrams
This program describes how to read and interpret wiring diagrams.
Book (SK13-01)................................................. 020-368................. 10.25

Understanding Electronic Controls I
Increases student’s understanding of electronic controls and their use
in HVAC systems.
Book (SK8-01A)................................................ 020-409................... 9.00

Understanding Electronic Controls II
Microprocessor Controls
Provides an understanding of relationship of inputs and outputs in
microprocessor controls used in HVAC systems.
Book (SK21-01)................................................. 020-102................... 9.00

Remote Mounted Thermostats
Bi-Metal, Electronic (including no sub base) and Programmable.
Discusses purpose and function, characteristics and operation,
installation, service and troubleshooting.
CD ROM PPT with Audio (GTA-8CD)................... 020-240................. 50.00
Book (GTA8-101 B)............................................ 020-249................... 7.75

YAC “IGC” Integrated Gas Unit Controller
Provides information on the functions and operation of the Integrated
Gas Unit Controller (IGC) board used for control of combustion and
blower motor operation on gas-fired rooftop equipment. Covers
familiarization, electrical operating sequence and an overview of
diagnostic features.
Book (GT54-01A).............................................. 020-512................... 7.75

Understanding Electronic Controls Ill
Variable Speed Technology

Controls Training

This program provides an understanding of variable speed motors
and their use in heating and cooling systems.
Book (SK27-01)................................................. 020-118................... 9.00

CDs will be converted to
USB drives during 2018.
Check website for media type.

www.CarrierUniversity.com.

Design Training

TDPs provide you with technical training materials designed to help
contractors, engineers, and designers to effectively design, specify,
sell, and apply HVAC equipment in commercial applications. Each
of these programs consists of a CD that contains a PowerPoint™
presentation with instructor notes that you can use to present a class,
typically three hours per topic. The presentation contains animations
where appropriate and hyperlinks to the various segments to assist
you in hosting a professional training session. High-quality graphics
and photos are used in all presentations, and video clips are used in
some programs to demonstrate more complex topics. Other instructor
features include a convenient link to charts and tables or other
supplementary material.
Additionally, books are available to use in your sessions or to hand
out for self-study. Each full-color book clearly covers the topic and
enhances the learning experience through state-of-the-art graphics.

Introduction to HVAC
TDP-101 Industry Overview
This TDP provides a general overview of the commercial HVAC industry,
providing an awareness of: the design process; participants in the
design and construction process; documents involved in construction;
a typical timeline of activities in the design and construction process;
and how these activities are influenced by the different participants in
the process. This industry is also influenced by regulatory agencies and
legal concerns that are important to designers of HVAC systems.
Book................................................................. 06-796-025............ 18.00
PowerPoint CD.................................................. 06-797-025............ 50.00

UPDATED
TDP -102 ABCs of Comfort
The Carrier TDP modules deal primarily
with the design and operation of comfort air
conditioning. To design these comfort air
conditioning systems, it is first necessary to
understand what comfort is, and how a system
designer can influence the human perception
of comfort. The “ABCs of Comfort” is a module
of the introductory series and is intended to
introduce system designers to the parameters
that influence human comfort, and how the air
system and mechanical refrigeration system
work together to control these conditions. The material presented helps
the designers determine one of the first objectives of the system design,
which is to establish the comfort standards for the project.
Book................................................................. 796-026................. 18.00
USB.................................................................. 797-026................. 50.00

TDP -103 Concepts of Air Conditioning
This module deals with the functions an air-conditioning system must
perform to provide comfort air conditioning. Elementary air-conditioning
definitions are explained and the fundamental classification of systems
is described. The types of systems, with their components and how
they control multiple building zones, are discussed. It is intended for
people new to the industry or who may not be familiar with the many
types of HVAC systems available. At the end of this module, a novice
should have a general understanding of air-conditioning systems and
how they deal with building zoning considerations.
Book.......................................................................796-027............ 18.00
PowerPoint CD........................................................797-027............ 50.00

UPDATED
Psychrometrics
TDP-201 Psychrometrics: Fundamentals
Psychrometrics is the study of the air and water vapor mixture. Proficiency
in the use of the psychrometrics chart is an important tool for designers
of air conditioning systems. Psychrometrics is required to properly
calculate heating and cooling loads, select equipment, and design air
distribution systems. While the topic is not complicated, it involves a
number of formulas and their application; the psychrometric chart is useful
in simplifying the calculations. This module is an introduction to air-vapor
mixtures, the information obtained from the chart, and plotting the eight
basic air conditioning processes.
Book................................................................. 796-030................. 18.00
USB Drive.......................................................... 06-797-030............ 50.00

Load Estimating
TDP-300 Load Estimating Level 1: Overview
An overview of commercial load estimating provides individuals with an
understanding of what a load estimate is and how it is used. Heat transfer
methods and theory are used to explain building load components that
provide the foundation for all load estimates. Solar radiant energy is
presented, along with other climatic conditions, to explain external siterelated conditions that affect building heat gains and losses.
Book................................................................. 06-796-085............ 18.00
PowerPoint CD.................................................. 06-797-085............ 50.00

TDP-301 Load Estimating Level 2: Fundamentals
The fundamentals of commercial load estimating are needed to
understand the various load components that go into making a practical
estimate of the amount of heating and/or cooling energy needed to
condition a building. Done properly, a load estimate provides the data
necessary to select heating and cooling equipment that can condition
the occupied spaces within a building. In the earliest stages, the load
estimate will tell the designer how big the job is, either in terms of cooling
capacity, expressed as tons of refrigeration, or in terms of airflow cfm. If
the characteristics of the loads for the building and the HVAC system are
known, then an analysis of the application can be used to come up with
the correct load and equipment selections to complete the design. Along
with psychrometrics, load estimating establishes the foundation upon
which HVAC system design and operation occur.
Book................................................................. 796-034................. 18.00
PowerPoint CD.................................................. 797-034................. 50.00

TDP-302 Load Estimating Level 3: Block and Zone Loads
The block and zone load portion of commercial load estimating takes the
designer through the process of making a practical estimate of the amount
of heating and/or cooling energy needed to condition a building. Block
and zone load estimates provide the data necessary to select heating and
cooling equipment that can condition the spaces within a building. Using
the outputs for the building block and zone load estimates, the HVAC
system equipment selections can be made to complete the design. Along
with Psychrometrics, load estimating establishes the foundation upon
which HVAC system design and operation occur.
Book................................................................. 06-796-035............ 25.00
PowerPoint CD.................................................. 06-797-035............ 50.00

Load Estimate Forms (Refer to TDP-301)
Forms to be used when calculating a heating load estimate or an air
conditioning load estimate. Uses Carrier ETD factor method.
Heating (E10-A) Pad of 25................................. 797-005............ 7.50/pad
Air Conditioning (E20-A) Pad of 25.................... 797-006............ 7.50/pad

Carrier University, PO Box 4808, Syracuse, NY 13221-4808 | 800-644-5544 | www.carrieruniversity.com

Design Training

Technical Development Programs

Design Training
UPDATED
Refrigeration Cycle
TDP-400 Principles of Mechanical
Refrigeration Introduction
Air conditioning is all about moving heat energy, by either adding or
removing it from one place and moving it to another. This module
deals with the way heat is moved from a place of lower temperature
to a place of higher temperature in a process called mechanical
refrigeration. This process is used in preserving the food we eat and
for comfort air conditioning. Much of the equipment discussed in other
TDP modules dealing with equipment uses the principles discussed
in this module. A designer needs a thorough understanding of the
concepts of mechanical refrigeration to create the best performing and
cost-effective projects. The Principles of Mechanical Refrigeration is
divided into two books, Introduction and Analysis. Before proceeding to
the equipment TDPs, the information in the Introductory material should
be understood. The Analysis TDP will provide a better understanding of
how to evaluate unit performance and select refrigeration components.
Book................................................................. 796-037................. 18.00
USB Drive.......................................................... 06-797-037............ 50.00

TDP-401 Principles of Mechanical Refrigeration
Cycle Analysis
This second module on Mechanical Refrigeration develops the
pressure enthalpy diagram and uses it to explain and analyze the
mechanical refrigeration process. The pressure-enthalpy diagram is
the tool used by designers of HVAC equipment to determine the size
and performance of each system component. Most designers do not
select each component, particularly since packaged-type equipment
has become the norm; however, the pressure-enthalpy diagram gives
the designer a very useful tool for understanding refrigeration system
modifications or options and their impact on cycle performance. This
TDP has five sections describing and developing the diagram.
Book................................................................. 06-796-084............ 25.00
PowerPoint CD.................................................. 06-797-084............ 50.00

TDP404-Compressor Types
The compressor is one of the four basic components required for the
mechanical refrigeration process. While most system designers will not
normally select a compressor by itself, the compressor is one of the
major components of the air-conditioning systems that they design.
An understanding of compressors and how they operate will help the
designer better select and apply air-conditioning units. This TDP has
four major sections describing compressors and their operation and
application. First, the different refrigeration cycles are discussed. These
include the positive displacement cycle, the dynamic cycle (Centrifugal
Cycle) and the absorption cycle. The second section explains
terminology associated with compressors and compressor design and
operational issues that relate to several of the types of compressor
designs. The third section explains each of the five major compressor
types used in comfort cooling applications in terms of the principle of
operation, construction, and performance. The final section addresses
system impacts on compressors and how compressors are selected
to match the design requirements. A knowledge of the basics of the
mechanical refrigeration cycle is necessary to understand this TDP.
Book................................................................. 06-796-040............ 25.00
PowerPoint CD.................................................. 06-797-040............ 50.00

Distribution Systems
TDP-502 Water Piping and Pumps
Water piping and pumping is a foundation topic of HVAC design.
The correct layout, selection, and sizing of the piping system and
associated hydronic components is required to properly deliver
chilled and hot water as required to maintain comfort conditions.
Book................................................................. 796-043................. 18.00
PowerPoint CD.................................................. 797-043................. 50.00

TDP-504 Duct Design Level 1: Fundamentals
This module will look at the way commercial duct design creates
an airflow conduit for interconnecting an air handler, VAV, and CV
terminals, and room air distribution devices as a means of delivering
conditioned air to the occupants of a building. A step-by-step design
process will be presented covering such aspects of duct design as
zoning, load determination, layout, sizing, and determining static
pressure losses for system fan selection. After completing the module,
participants will be able to manually size ductwork using either a
friction chart or a duct calculator.
Book................................................................. 796-045................. 18.00
PowerPoint CD.................................................. 797-045................. 50.00

Commercial HVAC Equipment
Air Handling Equipment
TDP-611 Central Station Air Handlers
Air handlers do not just handle air. They also cool, heat, filter, and
humidify. Central station air handlers are typically “built to order” with
a wide variety of available options and accessories to choose from.
Central station air handlers are available factory designed for indoor
use or for rooftop mounting. This TDP module will explain the types of
equipment and the sectional components that comprise an air handler,
both indoor and outdoor types, discuss the best applications served
by central station air handling units and why, as well as the software
programs used for selection.
Book................................................................. 796-049................. 18.00
PowerPoint CD.................................................. 797-049................. 50.00

TDP-612 Fans: Features and Analysis
The heart of any air handling system is the fan. Fans consume more
energy in a typical HVAC system than the compressors! It is extremely
important that the correct type of fan be chosen for the application.
This TDP module will describe fan characteristics and performance,
in order to provide designers with the knowledge to select the proper
fan for various HVAC applications.
Book................................................................. 796-050................. 18.00
PowerPoint CD.................................................. 797-050................. 50.00

TDP-613 Fans in Variable Air Volume Systems
One of the reasons that VAV (Variable Air Volume) systems are popular
is because they provide fan energy savings that constant volume
systems cannot. As a general statement, fans consume more energy in
a typical HVAC system than the compressors. Therefore, it is important
that the correct type of VAV fan be used for the application. Equally
important is that the fan in a VAV system is stable at part load operation,
as well as full load operation. This TDP module will explain the types of
fans that can be used in VAV systems, as well as the controls that may
be applied to regulate each.
Book................................................................. 796-051................. 18.00
PowerPoint CD.................................................. 797-051................. 50.00

TDP-614 Coils: DX, Chilled Water and Heating

TDP-632 Rooftop Units Level 2: VAV Rooftops

There are many coil applications used in HVAC design. They range from
small residential sizes to large built-up coil banks in custom air-handling
units. Regardless of their size, all coils serve the important function
of changing the temperature of the air to satisfy comfort or process
requirements. There are two main categories of coils, heating or cooling.
Heating coils use electricity, hot water, or refrigerant hot gas as a
heating medium. Cooling coils use direct expansion (cold refrigerant)
or chilled water. In this TDP, a design engineer will learn about the
components, features, and applications for direct expansion and
chilled-water cooling, and hot water, steam, and electric heating coils.
With an understanding of these items, the design engineer
can proceed with confidence to perform a proper coil selection and
prepare a specification.
Book................................................................. 06-796-052............ 18.00
PowerPoint CD.................................................. 06-797-052............ 50.00

Large rooftop units are a fast-growing segment of the rooftop industry.
A large VAV (variable air volume) rooftop unit with VAV terminals can
be used in the place of multiple smaller constant volume units as a
way of providing multiple zones of temperature control. With fewer
rooftop units, duct systems, power supplies, and roof penetrations, cost
savings are realized. The VAV rooftop unit can be incorporated with a
variety of VAV terminals to form a complete system. Large VAV rooftop
units are also being used in some applications traditionally reserved
for applied equipment, such as central station air handlers and chiller
systems. The rooftop variable air volume system offers a competitive
first cost, competitive operating cost, ease of service, good indoor air
quality capabilities, and good part-load humidity control. The ability to
deliver these benefits has led to increased use of variable air volume
systems using large tonnage rooftop units.
Book................................................................. 06-796-057............ 18.00
PowerPoint CD.................................................. 06-797-057............ 50.00

Chillers
TDP-622 Air-Cooled Chillers

TDP-633 Indoor Self-Contained Units

Air-cooled chillers can be used as a single-piece unit or a split in various
configurations. This flexibility has contributed to their overall popularity
among designers of chilled-water systems. Air-cooled chillers range
in size from small-capacity models to several hundred-ton models that
are utilized to cool large commercial buildings. This TDP module will
cover both packaged single-piece air-cooled chillers as well as split
system types. This TDP module will also cover the available options
and accessories for air-cooled chillers, as well as criteria for selecting
an air-cooled chiller.
Book................................................................. 796-054................. 18.00
PowerPoint CD.................................................. 797-054................. 50.00

TDP-623 Water-Cooled Chillers
Water-cooled chillers range in size from small 20-ton capacity models
that can fit in an elevator to several thousand-ton models that cool
the world’s largest facilities such as airports, shopping centers,
skyscrapers, and other facilities. This TDP module will concentrate on
the larger chillers in the range of 200 tons and upward. We will cover
both screw and centrifugal-type compressor water-cooled chillers,
as they tend to be the most popular designs for larger commercial
applications. This TDP will also discuss the options and accessories
available for water-cooled chillers and the criteria used when selecting
a water-cooled chiller.
Book................................................................. 796-055................. 18.00
PowerPoint CD.................................................. 797-055................. 50.00

Self-contained units are a unique segment of the packaged air
conditioning industry. They are available in a variety of configurations
for both air-cooled and water-cooled applications. For comfort air
conditioning applications, they are popular for use as spot coolers in
stores, restaurants, and industrial buildings. Self-contained units are
often used in multiples, usually with a cooling tower, to form a floorby-floor system in high-rise buildings. All sizes of self-contained units
are available for constant volume (CV) applications. Smaller tonnage
self-contained units can be used with zoning systems such as variable
volume temperature (VVT®) systems where multiple control zones are
required. Units above 20 tons in capacity are available factory-modified
for variable air volume (VAV) applications where multiple zones of
control are necessary and fan energy savings is desired.
Book................................................................. 06-796-058............ 18.00
PowerPoint CD.................................................. 06-797-058............ 50.00

TDP-634 Split Systems
Spilt systems are one of the major categories of HVAC equipment,
and the primary system type used in residential air conditioning. Split
systems are classified as a unitary, or packaged unit, and, as such, have
many of the benefits of packaged equipment while offering the flexibility
associated with applied products. This module will describe what split
systems are, the components of the system and accessories frequently
used. It will show the designer how systems are applied, explain
common installation issues, and describe how to select a system.
Book................................................................. 796-059................. 18.00
PowerPoint CD.................................................. 797-059................. 50.00

Smaller tonnage constant volume rooftop units are the most widely
used units in the commercial air conditioning industry. They are
produced by the tens of thousands by the major manufacturers and are
applied to a wide cross section of installations, ranging from strip malls
to schools and offices. Their key features and applications are the focus
of the material in this TDP module.
Book................................................................. 796-056................. 18.00
PowerPoint CD.................................................. 797-056................. 50.00

CDs will be converted to
USB drives during 2018.
Check website for media type.

www.CarrierUniversity.com.

Carrier University, PO Box 4808, Syracuse, NY 13221-4808 | 800-644-5544 | www.carrieruniversity.com

Design Training

Packaged Units
TDP-631 Rooftop Units Level 1: Constant Volume

Design Training
Other Equipment
TDP-641 Cooling Towers and Condensers
Heat rejection is a process that is central to air conditioning. The heat
is rejected to the environment using air or water as the medium. This
TDP module discusses the most common heat rejection methods:
condensers and cooling towers. In order to apply systems to a design,
HVAC designers must be aware of the different heat rejection methods.
In this TDP we discuss total heat of rejection, its derivation, and how it
applies to the process of air conditioning, as well as the controls that
may be used to regulate each.
Book................................................................. 796-060................. 18.00
PowerPoint CD.................................................. 797-060................. 50.00

Systems
TDP-701 System Selection
System selection can be a simpler, more understandable process if
the designer and owner follow a step-by-step procedure. This TDP on
System Selection presents one method that can be used by designers
on most commercial projects. An example project will begin by
assembling and documenting all available project data at the earlier
phases of the design process. After determining the delivery method,
budgets and schedules, and running rough heating and cooling
loads for a zoned project, an initial list of potential HVAC systems
will be assembled. This list will be reviewed against various design
criteria that were determined for the project. The final two or three
HVAC systems will be evaluated against a prioritized list of design
criteria using a rating method called the Systems Scoresheet. The
system with the highest numerical rating, once approved, will then be
designed and built. Throughout the selection and design processes,
job requirements and system parameters are documented on the
Design Record form presented in the TDP.
Book................................................................. 06-796-066............ 25.00
PowerPoint CD.................................................. 06-797-066............ 50.00

TDP-702 Comfort Control Principles
Air-conditioning systems maintain the desired indoor comfort level,
starting with space temperature. Other comfort parameters include
maintaining acceptable room humidity, air motion, air quality, and air
purity. The relative importance of each system function depends upon
the specific project and application. Zoning is required to maximize
the number of spaces that are successfully conditioned to the design
criteria. There are many different types of HVAC systems, and many
more elements that can be used to achieve the heating and cooling
capacity, provide ventilation, maintain humidity, distribute the air within
the spaces, etc. This module will discuss various temperature control
strategies and HVAC systems that can be employed to maximize
comfort provided to the building occupants.
Book................................................................. 06-796-067............ 18.00
PowerPoint CD.................................................. 06-797-067............ 50.00

TDP-706 Water Source Heat Pumps
This module will provide an understanding of the components in water
source heat pump systems, configuration options, system benefits, and
many applications associated with the overall system. WSHP systems
have become a very popular choice for use in commercial buildings
where individual zones of control are required to maintain comfort
conditions. Building types that exhibit a simultaneous cooling and
heating load are ideal candidates. WSHP systems have other desirable
characteristics like zoning capability, ease of design, and reliability so
that buildings where little or no reclaim will take place are often still
considered for using a WSHP system.
Book................................................................. 06-796-071............ 25.00
PowerPoint CD.................................................. 06-797-071............ 50.00

Commercial Controls
TDP-801 Controls Level 1: Fundamentals
The fundamentals of HVAC controls introduces the basic concepts of
control and the vocabulary necessary to understand HVAC controls
that are part of the design of HVAC systems. This TDP will take the
basic elements and building blocks of HVAC controls and show how
comfort control systems create the desired equipment responses for
maintaining room environmental condition set points.
Book................................................................. 796-074................. 18.00
PowerPoint CD.................................................. 797-074................. 50.00

TDP-802 Controls Level 2: DDC Networking
The networking of HVAC DDC controls includes the basic concepts of
controls interoperability and the benefits of tying HVAC control systems
into the greater network of building system controls. This TDP includes
a refresher of the elements and building blocks of HVAC controls and
presents basic control strategies used to create the desired equipment
responses for maintaining space environmental condition set points.
This module will explain the workings of control system networks,
present four key management methods available through DDC
control networks, and show how to specify network configuration
and functionality.
Book................................................................. 06-796-075............ 18.00
PowerPoint CD.................................................. 06-797-075............ 50.00

TDP-704 Variable Volume and Temperature Systems
VVT is an economical, all-air zoned system that is ideal for many
commercial jobs, especially at a time when there is so much design
emphasis being placed on high-quality air treatment, outdoor air
ventilation, and room air circulation. VVT systems are a popular solution
for heating and cooling multiple zone applications in small to medium
size buildings. VVT controls typically are supplied pre-packaged from
the HVAC equipment supplier and are ready to install by the mechanical
contractor. The objective of this module is to define VVT and describe
how it achieves zone temperature control.
Book................................................................. 796-069................. 18.00
PowerPoint CD.................................................. 797-069................. 50.00

CDs will be converted to
USB drives during 2018.
Check website for media type.

www.CarrierUniversity.com.

Acoustic considerations for project designs are often overlooked.
When overlooked, these issues result in noise issues that can be
more expensive than if acoustic design were considered in project
development. This TDP introduces system designers to the principles
of acoustics and includes suggestions on how to address acoustic
issues early in design. An approach is also presented on how to address
an existing project with noise issues. Understanding acoustic design
principles will help designers select and apply equipment and design
distribution systems that more cost-effectively meet the project’s total
environmental quality (TEQ) goals. This module has seven sections.
The first explains acoustic terms and how to add and subtract sound
levels. The second section discusses the methods used to establish an
acoustic rating both indoors and outdoors, including how manufacturer
sound data is generated. The next two sections describe how to
determine the acoustic design goal and how to estimate the sound at
the receiver using the source-path-receiver concept. Specific guidelines
are provided on how to estimate the sound at the equipment to control
noise. The next section discusses troubleshooting existing projects,
followed by controlling vibration at the design stage. Finally, guidelines
are provided for preparing acoustic specifications.
Book................................................................. 06-796-076............ 25.00
PowerPoint CD.................................................. 06-797-076............ 50.00

TDP-910 Energy Recovery
This TDP module deals with the methods and product types that are
available for air-to-air recovery of energy in comfort air-conditioning
applications. The recovered energy is transferred from the building
exhaust airstream to the building ventilation airstream. This transfer
can result in energy savings and potential downsizing of the HVAC
equipment. Upon completion of this module, the student should have
a specific understanding of the types of energy recovery technology,
the best fit for each type, and how to identify recovery opportunities
in comfort heating and cooling applications.
Book................................................................. 06-796-064............ 25.00
PowerPoint CD.................................................. 06-797-064............ 50.00

TDP Text Books
TDP Book I - Fundamentals
Book 1A Contains – Industry Overview, ABC’s of Comfort, Concepts of
Air Conditioning, Psychrometrics: Introduction, Load Estimating Level 1:
Overview and Load Estimating Level 2: Fundamentals.
Book 1B Contains – Refrigeration Cycle: Introduction, Duct Design
Level 1: Fundamentals, Water Piping and Pumps, System Selection and
Controls Level 1: Fundamentals.
Book................................................................. 06-796-104.......... 175.00

TDP-902 Indoor Air Quality

TDP Book II – Packaged Systems

This module evaluates the importance of Indoor Air Quality (IAQ) to
the occupants of a building. An HVAC system may contribute to
the problem of poor IAQ or provide means to maintain proper IAQ.
Recent changes incorporated in ASHRAE Standard 62.1 Ventilation
for Acceptable Indoor Air Quality will be highlighted.
Book................................................................. 06-796-077............ 25.00
PowerPoint CD.................................................. 06-797-077............ 50.00

Book 1A Contains – Rooftop Units Level 1: Constant Volume, Rooftop
Units Level 2: VAV Rooftops and Indoor Self-Contained Units.
Book 1B Contains – Split Systems, Variable Volume and Temperature
and Water Source Heat Pumps.
Book II.............................................................. 06-796-105.......... 150.00

TDP-903 Life Cycle Costing for HVAC Systems
Decisions about the type of HVAC system or decisions related to making
HVAC system modifications are based on financial justification. The
federal government, sustainable design projects and many other entities
require that these decisions be based on the total life cycle costs rather
than first cost alone. The commonly used life cycle costing methods
help determine the total life cycle financial impact. This training module
discusses the life cycle costing methods and how they are applied
to HVAC-related decisions. Six sections describe the basic concepts
behind the life cycle cost methods, a recommended procedure to
follow, what data should be included, where to find the data and several
techniques to be used in evaluating the data and making a decision.
Also covered are payback and several other decision-making tools.
This material can equally be applied to public or privately funded
projects with certain guidelines. This module will explain these
guidelines and demonstrate a life cycle costing software program.
Book................................................................. 06-796-078............ 25.00
PowerPoint CD.................................................. 06-797-078............ 50.00

TDP Book III – Applied Systems
Book 1A Contains – Central Station Air Handlers, Fans: Features and
Analysis, Fans in Variable Air Volume Systems and Coils: DX, Chilled
Water and Heating.
Book 1B Contains – Air-Cooled Chillers, Water-Cooled Chillers and
Cooling Towers and Condensers.
Book III.............................................................. 06-796-106.......... 150.00

TDP Book IV – HVAC Advanced Topics
Book 1A Contains – Load Estimating Level 3: Block and Zone Loads,
Filtration and Energy Recovery.
Book 1B Contains – Refrigeration Cycle: Cycle Analysis and
Compressor Types.
Book 2A Contains – Comfort Control Principles, Controls Level 2:
DC Networking and Acoustics and Vibration.
Book 2B Contains – Indoor Air Quality and Life Cycle Costing for
HVAC Systems.
Book IV (2 book sets)......................................... 06-796-107.......... 175.00

TDP-909 Filtration
The methods and products available for removing contaminants from the
air is the focus of this TDP module. Filtration is one part of a good IAQ
strategy and is used to manage the indoor environment. Specifically, the
types of mechanical and gas-phase filters used in comfort air-conditioning
applications along with electronic air cleaners are covered. Upon
completion of this module, the student should have an understanding of
the types of filters available, their capabilities, and applications.
Book................................................................. 06-796-063............ 18.00
PowerPoint CD.................................................. 06-797-063............ 50.00

Carrier University, PO Box 4808, Syracuse, NY 13221-4808 | 800-644-5544 | www.carrieruniversity.com

Design Training

Commercial HVAC Applications
TDP-901 Acoustics and Vibration

Design Training
Air Conditioning System Design Guidelines

Refrigerant Piping Systems

Text discusses factors influencing the selection of systems. Covers
building loads and the relationship to zoning and system selection. The
various systems discussed are: All-Air Systems, All-Water Systems,
Air-Water Systems and Direct Refrigerant Systems. Heating System
performance and Economizer Cycles are also presented. (20 pages)
Book................................................................. 796-010................... 9.25

Covers the layout, sizing, materials, accessories, safety and limit
controls and design practices for single and multiple refrigerant
piping systems. Discusses oil circulation and refrigerant migration
and their effect on design.
T200-34B Text (84 pages)................................. 791-234................... 5.50
T200-34B PP PowerPoint Presentation.............. 793-234................. 25.00

Air-to-Air Heat Pumps

Refrigerant Piping for Split Systems

This training module has been designed to equip the reader with the
basic principles of the heat pump. The text explains the concept,
operation, energy advantages, selection, control and application of
air-to-air heat pumps. Although the basis of the text is the air-to-air
heat pump, many of the principles covered are universally applicable
to other types of heat pumps.
T200-85 Text (52 pages) .................................. 791-085.................. 5.50
T200-85PP PowerPoint Presentation................. 793-085................ 25.00

Presents the basics to understanding the procedures and use of
data for designing and sizing refrigerant lines as applied to packaged
equipment split systems. Also discussed are some of the problems
involved in piping systems, thus aiding the designer in avoiding the
compounding of design errors.
T200-64 Text (44 pages)................................... 791-064................... 5.50

Air Cooling Coils
This training will review nomenclature, physical construction features,
heat transfer characteristics, airside performance and design
techniques related to air cooling coils. Both chilled water and direct
expansion coil types are included. Primary emphasis is placed on
comfort air conditioning application.
T200-22B Text (52 pages) ................................ 791-122.................. 5.50
T200-22PP PowerPoint Presentation................. 793-122................ 25.00

Introduction to Variable Air Volume
This presentation of material covers the general application guidelines
for variable air volume systems. The material covered includes
background, space loads, apparatus loads, system arrangements,
system components and advantages. This presentation is particularly
valuable to the better understanding of variable air volume (VAV)
systems by architects, consultants, contractors and owners.
T200-45 Text (28 pages) .................................. 791-045.................. 5.50
T200-45PP PowerPoint Presentation ................ 792-045................ 25.00

Load Estimating Using Storage Load Factors
and Equivalent Temperatures (SDM Part 1 User Guide)
This program is aimed at developing the understanding and skills
necessary to accomplish a “block” cooling and heating load estimate.
The Carrier E-20 method is explained in 16 chapters of text with
appropriate Work Sessions. The text illustrates calculations for an
example building while the student performs similar calculations for
another structure. The information presented is necessary to have
full understanding of the output of computerized load estimates.
T200-90 Text (104 pages) ............................... 791-090.................. 5.50

Refrigeration Cycle Accessories
This text contains a detailed discussion of commonly used accessory
components used in air conditioning systems. Thermostatic expansion
valve operation, types, and selection are explained. Also covered is the
function and application of many other accessories such as solenoid
valves, filter driers, mufflers, and accumulators. Part load controls such
as hot gas bypass systems are also examined.
T200-12 Text (76 pages)................................... 791-012................... 5.50

Room Air Distribution
Principles of room air distribution including blow, drop, induction
and spread are explained. The text presents factors relative to the
performance, rating and selection of sidewall, under-window and
ceiling diffusers.
T200-24B Text (72 pages)................................. 791-224.................. 5.50
T200-24B PP PowerPoint Presentation.............. 793-224................ 25.00

Fundamentals of Psychrometrics
This training module presents the theory of psychrometrics and the
derivation of the formula used to create the psychrometric chart.
Once the fundamental concepts behind the psychrometric chart
are understood the text uses examples to demonstrate the use of
psychrometrics to solve typical air conditioning processes.
T200-20A Text (84 pages)................................. 791-120................... 7.00

CDs will be converted to
USB drives during 2018.
Check website for media type.

www.CarrierUniversity.com.

Residential Air System Design
Discusses the various types of residential distribution systems and
when they should be applied. Also describes extended plenum &
reducing extended plenum (equal friction) system design procedure
for sizing supply and return ducts and outlets using pre-engineered
sizing charts. Demonstration and work session problems are included
to illustrate procedures and insure understanding.
TDP-36 Text (94 pages) .................................... 791-443.................. 8.50

Residential Cooling/Heating Load Estimating–REZ1
This program starts with a discussion of residential system design
and the importance of accurate load estimates. This is followed by a
review of the load-estimating procedure using the REZ-1 Block Load
and Room-by-Room forms. A demonstration cooling and heating
problem is used to illustrate how these easy-to-use forms produce
results comparable to longer, nationally recognized load estimate
methods. Two additional work sessions are provided for practice and
better understanding.
TDP-6 Text (104 pages)..................................... 791-413.................. 8.50

Residential Equipment Selection
This series covers selection of various types of residential equipment
—cooling, heating, heat pump, and air treatment products. Typical
rating data and selection procedures are presented and their uses
are illustrated by means of a demonstration selection example. Also
included in text is student work session selection and quizzes
for each type of product.
TDP-16-1 Cooling Equip. Selection Text (68 pages)
......................................................................... 791-423................... 8.50
TDP-16-2 Heating Equip. Selection Text (52 pages)
......................................................................... 791-424................... 8.50
TDP-16-3 Heat Pump Selection Text (100 pages)
......................................................................... 791-425................... 8.50
TDP-16-4 Air Treatment Products Text (52 pages)
......................................................................... 791-426................... 8.50

Residential System Design Guide
The 11 chapters of this guide provide a professional, everyday approach
for sizing and selecting cooling and heating equipment and for planning
a quality system addition, modification, or complete installation.
Focused on add-on replacement situations, it can be used as a
ready-reference source for self-study or as the platform for an add-on/
replacement training seminar.
CHAPTERS INCLUDE:
1. Introduction to Residential System Design
2. Survey and Preliminary Air System Evaluation
3. Load Estimating
4. Cooling Equipment
5. Heating Equipment
6. Heat Pumps
7. The Air System
8. Supporting Systems
9. Air Treatment Equipment
10. Zoned Systems
11. Glossaries, Tables, Guidelines, Worksheets, Forms
Residential System Design Guide...................... 791-451.............. 100.00

Residential Application Guide
To familiarize you with the 24 series air conditioners and 25 series
heat pumps, their nomenclature and features for each of their 4 tiers:
Base, Comfort, Performance and Infinity, so that you can design and
sell them. It is designed to teach you how to select the system type,
component style and tier for each product used in Carrier cooling
or heat pump split systems. Component sizing is included, as well
as long line design strategies and air system design guidelines.
Book (Appl-01).................................................. 06-C24-027............ 15.00

CDs will be converted to
USB drives during 2018.
Check website for media type.

www.CarrierUniversity.com.

Carrier University, PO Box 4808, Syracuse, NY 13221-4808 | 800-644-5544 | www.carrieruniversity.com

Design Training

Residential Design Guides

Design Training
Carrier System Design Manual
The Carrier System Design Manual is the first practical guide for the
design of air conditioning systems. This easy-to-use reference is
designed specifically for the design and consulting engineer. It covers
every step in the design process, from load estimating to selecting
and engineering the appropriate system.
Although published in the 1960’s, this manual is still a useful instructional
guide to system design. However, it should be used in conjunction with
current ASHRAE or other industry data. The complete System Design
Manual consists of twelve (12) individual books. Bound manual consists
of the 12 books (3 volumes in each set) listed below.
System Design Manual ..................................... 590-367.............. 125.00
Individual books may also be ordered separately as indicated below:

Part 1 - Load Estimating
A guide in the preparation of practical cooling and heating load
estimates. Eight chapters include: survey and load estimate, design
conditions, heat storage, solar heat gain glass, heat and moisture
flow, infiltration and ventilation, internal and system heat gain, applied
psychrometrics. (164 pages)
Part 1................................................................ 510-304................ 15.00

Part 2 - Air Distribution
Includes data and examples as a guide in practical design and layout
of air handling equipment, ductwork and air distribution components.
(94 pages)
Part 2................................................................ 510-308................ 13.50

Part 3 - Piping Design
Covers practical design and layout, including data and examples of
normal air conditioning piping systems - piping design, water piping,
refrigerant piping, steam piping. (110 pages)
Part 3................................................................ 510-312................ 13.50

Part 4 - Refrigerants, Brines, Oils
A presentation guide in the application and selection of refrigerants,
brines and oils when used with air conditioning systems. (68 pages)
Part 4................................................................ 510-310................ 10.00

Part 5 - Water Conditioning
A background guide to a better understanding of the cause, effect and
prevention of water problems in various water circulatory systems. Also
discusses some of the more common practices for lessening the effect
of scale and corrosion. (56 pages)
Part 5................................................................ 510-318 ............... 10.00

Part 6 - Air Handling Equipment
A discussion in the selection and application of air handling equipment
for normal air conditioning systems - fans, air conditioning apparatus,
unitary and accessory equipment. (72 pages)
Part 6...................................................................... 510-320........... 10.00

Part 7 - Refrigeration Equipment
Covers the selection and application of refrigeration equipment for
normal air conditioning systems: reciprocating centrifugal, absorption,
absorption-centrifugal combination refrigeration machines; heat
rejection equipment. (72 pages)
Part 7................................................................ 510-324................ 10.00

Part 8 - Auxiliary Equipment
Book is comprised of practical data for the selection and application
of auxiliary equipment used with air conditioning systems—centrifugal
pumps, motors and motor controls, boilers, miscellaneous drives.
(76 pages)
Part 8................................................................ 510-332................ 10.00

Part 9 - Systems and Applications
A guideline for selecting the air conditioning system used with specific
applications. (24 pages)
Part 9................................................................ 510-321.................. 9.00

Part 10 - All-Air Systems
A presentation of data and engineering procedures to guide the
engineer in the practical designing of all-air systems. The complete
range covers the conventional, constant volume induction, multizone,
dual-duct, variable volume and dual conduit systems. (60 pages)
Part 10.............................................................. 510-322.................. 9.00

Part 11 - Air-Water Systems
A guide to the engineer in the practical designing of air-water systems
for use in perimeter rooms of multistory; in multiroom buildings where
cooling or heating may be required simultaneously in adjacent rooms;
where ductwork space is at a minimum. (36 pages)
Part 11.............................................................. 510-327.................. 9.00

Part 12 - Water and DX Systems
A guide, which includes data and engineering procedures, in the
practical designing of water and DX systems. (22 pages)
Part 12.............................................................. 510-329.................. 9.00

Process Refrigeration

Engineering Guides

This Book contains seven sections on the following subjects:
1. Process Refrigeration Cycles – Describes industrial process
centrifugal refrigeration cycles to explain the advantages and
disadvantages of various systems. Uses refrigerant 134A in three
example comparisons.
2. Refrigerants – Deals with the properties, selection factors and .
application of refrigerants including 134A.
3. Heat Transfer Fluids – Discusses those fluids usually referred to
as “brine”– meaning any secondary liquid coolant other than water.
It discusses the properties, selection factors and application of such
fluids to process refrigeration systems.
4. Centrifugal System Components – Describes components normally
used in a process refrigeration system that is designed around
centrifugal refrigeration equipment.
5. Centrifugal Compressor Components – General discussion of
the components that make up industrial refrigeration centrifugal
compressors. It delves into describing the parts of a centrifugal
compressor and their functions.
6. Reciprocating Systems Components - Brief description of
reciprocating compressors and their application in process
refrigeration systems. It describes the major and minor components
of reciprocating refrigeration systems.
7. Helical Screw Compressor System Components – Provides a brief
description of screw compressors and their application. Reviews the
components of screw compressor refrigeration systems.

These guides provide the design engineer with various short cuts
and time-saving procedures while still producing a dependable system
design for a specific market application.

ES-01............................................................... 795-100................. 45.00

Altitude Effects
This guide provides reference data regarding the effects of altitude on
air conditioning equipment. It is written to meet the specific needs of
those responsible for the details of design or equipment selection
(16 pages).
Guide................................................................ 592-016................... 6.00

Comfort Design Made Simple
The number of variations and special features of comfort commercial
systems is so vast that no two systems are exactly alike. However,
there is a common method of design that works for all systems. In this
guide, a straightforward, step-by-step design approach is presented
and demonstrated for all-air, all-water, air-water and direct refrigerant
systems. Commonality of design techniques for all systems is
emphasized in the hope of bringing the process down from a complex
task to very manageable endeavor. (36 pages)
ENG-01............................................................. 795-200.................. 8.00

Indoor Air Quality (IAQ)
This guide is directed to consulting engineers, design-build contractors,
servicing and maintenance contractors, who have a working
understanding of comfort air conditioning design, maintenance and
codes regulating today’s indoor air quality issues. The purpose of
this engineering guide is to highlight areas of concern which have
resulted from heightening focus on the quality of indoor air. Specific
problems and solutions are presented with priorities noted and
practical examples given.
ENG-02 (Approx. 36 pages)............................... 795-201.................. 8.00

Reciprocating Chiller Heat Reclaim System

Design Training

This guide discusses the concept of heat reclaim, including system
design, equipment selection criteria, controls and analysis of operating
costs. (64 pages)
Guide................................................................ 592-026................... 6.00

Carrier University, PO Box 4808, Syracuse, NY 13221-4808 | 800-644-5544 | www.carrieruniversity.com

Design Training
Engineering Forms
REZ-1 Cooling/Heating Load Estimate (Packet)
Package containing: Data table booklet with completed examples;
four block and four room-by-room load estimating forms.
Packet............................................................... 794-104................. 14.00

Extra Estimate Forms: REZ-1 Block Load
(4 pages). Folds to 8-1/2 x 11.
Form................................................................. 794-103.............. 9.00/25

Rez-1 Room-By-Room Load
(4 pages). Folds to 8-1/2 x 11.
Form................................................................. 794-102.............. 9.00/25

Commercial Systems Quick Reference (CSQR)

REZ-1 Residential Heating & Cooling Survey & Checklist

The Commercial Systems Quick Reference (CSQR) is a highly visual
desk reference which illustrates the integration of numerous systems
with a few representative buildings. Each building is realistic and not
merely conceptual. In addition to systems applied in the buildings, the
CSQR also contains spreadsheets on ten commonly used systems, a
generic product feature run-down, and ballpark design guidelines. If you
are new to or have some experience in designing or servicing HVAC
systems, it provides a quick and easy way to put the myriad of systems
and products in our business into simple categories. It also reminds
you of some of the basic layout considerations and tradeoffs inherent to
various systems. (Approx. 200 pages)
ENG-05............................................................. 795-205................ 45.00

Pad of 25 Survey & Checklist forms is backed up with a floor plan grid.
Form................................................................. 794-107............ 7.00/pad

Water Source Heat Pump Design Guide

Residential Air System Evaluation Form

A practical step-by-step guide on how to design commercial water
source heat pump systems. This design guide discusses product types,
design considerations, a description of the complete design process,
and an operating cost analysis for an example building in various
climates. (Approx. 86 pages)
ENG-03............................................................. 795-202................ 12.50

This form is the perfect guide for the service technician or residential
sales person to evaluate the condition of the ductwork and air system in
replacement situations.
Package of 10................................................... 794-113...........3.00 pack

VAV Rooftop System Design Guide
Use this engineering design guide as an assist in putting together the
equipment, terminals, diffusers, ductwork and controls needed to
create a cost-effective HVAC system that can be just right for many of
today’s buildings. The guide is divided into two parts. Part one provides
in-depth information about relevant design issues, and part two is a
step-by-step approach to design. This manual will be appreciated by
sales engineers, junior designers and experienced professionals alike.
An example building is followed throughout the book. (Approx. 130 pages)
ENG-07............................................................. 795-207................. 12.50

Cooling Check Figures and Design Air Distribution Rates
These figures will help you get a ballpark idea of the occupancy,
lighting, ventilation and cooling requirements of a building during
the schematic phase of the project.
Pad of 10.......................................................... 794-031.............. 9.00/10

Small Rooftop VAV System Design Guide: New Construction
This design guide provides a step by step approach to designing a
Variable Air Volume system using Carrier’s 48 and 50 LC VAV rooftop
units, VAV terminals and i-Vu control system. This guide covers the
design process from initial load estimate, through selection of diffusers,
VAV terminal and rooftop unit, to the control system selection and
operation. This guide applies to any building where the entire HVAC
system will be new.
ENG-08............................................................. 795-208................. 18.00

Residential System Design Guidelines
A four-page booklet containing the most used tabular data required for
evaluating, applying and sizing components of residential air systems.
Booklet............................................................. 794-111...........2.00 each

Residential System Design Worksheet
For recording design information – pre-engineered design and sizing
data. (Reference TDP-36).
Pad of 25.......................................................... 794-110............ 5.00/pad

Engineering Charts

CATALOG NO.

TEMPERATURE

ELEVATION

Normal
20° to 110° F

794-015

(Includes definitions, symbols,
how-to-use, and examples)

FORMAT

SIZE

PRICE

2 Color
6 pages

Folds to 8.5 X 11
6 pages

16.00/25

794-018

Normal
20° to 110° F
Low
20° to 50° F

Sea Level

Vinyl

2 sides
11 X 17

8.75 each

794-017

Normal
20° to 110° F

Sea Level

2 Color
Paper

8.5 X 11

7.50/Pad

794-023

Normal
20° to 110° F

Sea Level

Laminated

24 X 37
Wall Chart

12.50 each

Normal Temperatures

Sea Level

Normal Temperatures

2,500 Feet

Normal Temperatures

5,000 Feet

Normal Temperatures

7,500 Feet

11 X 17

12.00 per set

Normal Temperatures

10,000 Feet

Low Temperature

Sea Level

High Temperature

Sea Level

06-794-021
Contains 5 each of
the following Charts:

Carrier University, PO Box 4808, Syracuse, NY 13221-4808 | 800-644-5544 | www.carrieruniversity.com

Design Training

English Version (Fahrenheit/Foot/Pounds) Specifications

Design Training
Engineering Charts
Metric Version (Centigrade/Meters/Grams) Specifications

CATALOG NO.

TEMPERATURE

ELEVATION

FORMAT

SIZE

PRICE

794-003

Normal
10° to 55° C
Low
-30° to 15° C

Sea Level

Vinyl

2 sides
11 X 17

8.75each

Normal Temperatures

Sea Level

11 X 17

Normal Temperatures

Sea Level

8.5 X 11

Low Temperatures

Sea Level

High Temperature

Sea Level

Normal Temperatures

750 Meters

Normal Temperatures

1500 Meters

Normal Temperatures

2250 Meters

Normal Temperatures

3000 Meters

06-794-022
Contains 5 each of
the following Charts:

Engineering Software
PSYCH+

Design Training

Psych+ is a Windows-based computerized psychrometric chart
and instructional guide that is applicable for all types of users, from
the student to the professional engineer. The Psych+ electronic
chart offers a convenient and accurate method for obtaining the
properties of air-vapor mixtures, as well as the ability to effectively
illustrate and solve a variety of air conditioning processes and/
or cycles. With Psych+’s state-of-the-art technology and online
help file, you can graphically portray system responses for easy
interpretation of system data at computer speed. Psych+ is an
instructional and engineering tool for today’s design-conscious
environment. This program is not compatible with Windows® 8.
Software PSYC-01A.......................................... 794-120................ 75.00
Student Book PSYC-02...................................... 794-121.................. 5.50

12.00 per set
11 X 17

General Training Materials
Professional Development
Six Steps to Great Training
Using worksheets and examples, this manual guides trainers through
a six-step process that assures effective training every time. Aimed
at the part-time or casual technical trainer, this manual can also be
used by anyone who is called upon to provide training.
Book................................................................. 020-720................. 10.25

Award Certificates
Sale of these items is restricted to Distributors and Carrier offices only.
Achievement certificates to be presented to student completing a
course. Award certificates are 8.5 x 11 on parchment-type paper with
gold foil border, laser-compatible. Signature line provided for instructor
and distributor.
GTG-2 Certificate of Achievement...................... 020-384............ 15.00/25

Tools, Rules, Pocket Cards, Etc.
Duct Calculator Static Regain
Convenient simplified method of sizing duct by static regain, equal
friction and volume reduction. The handy calculator is a multicolor easyto-read device. It is intended to be used by all duct system designers.
Includes an 8-page book that describes the use of the duct calculator.
Calculator......................................................... 599-922................. 18.80

Equal Friction Duct Calculator

SHF Alignment Ruler
A unique device that simplifies plotting of the sensible heat factor line
and determination of apparatus dewpoint on the psychrometric chart.
Also serves as an architectural scale. Clear plastic ruler, 11-1/4 x 1-1/2,
is packaged in envelope with instructions. Includes three holes for
insertion in ring binder.
T200-83 ............................................................... 798-013............. 3.75

Natural Gas Furnace Manifold Pressure Calculator
Uses slide rule calculator to determine Gas Furnace Manifold Pressure
in residential furnace applications.
Calculator (GT26-01A)....................................... 020-444................... 4.75

Superheat/Subcooling Charging Calculator/Slide Rule
For use with HCFC-22 systems(GT24-01).......... 020-434................... 4.00
For use with R-410A systems (GT58-01)........... 020-517................... 4.00

Puron® Subcooling Calculator
Puron® R-410A on one side and R-22 on the other. Also includes TXV
troubleshooting tips.
Calculator......................................................... 06-020-640.............. 4.00

Pocket Service Card (Residential)
For Field Superheat/Subcooling Charging. Also contains TemperaturePressure Charts for HCFC and HFC refrigerants. (Package of 10.)
For HCFC-22 Systems (GT51-01)...................... 020-499.............. 7.00/10
For HFC-134A Systems (GT52-01).................... 020-500.............. 7.00/10

A simple duct calculator, pocket size, for sizing air distribution systems
by the equal friction method. Instructions and design data are imprinted
on calculator.
T200-11........................................................... 794-036..............4.00 ea.

UPDATED
HVAC Reference Pocket Chart
A pocket-size reference guide that an architect, engineer or contractor
might find useful. Includes a psychrometric chart, important formulae
and some handy charts relative to air conditioning. Enclosed in
flexible plastic, it is durable enough to be around for a long time.
Approximately 4.25 X 8 folds to 2.5 X 4.25
Guide ............................................................... 794-014............. 7.50/10.

A pad of 25 blank log sheets to record operating pressures on
reciprocating liquid chillers. Includes a trend chart for identifying
different system problems. (See Troubleshooting Reciprocating
Liquid Chiller Training, Skills section.)
Maintenance Log Sheets (Pad of 25) (SK26-03A)
......................................................................... 020-117............ 7.50/pad

Absorption Machine Equilibrium Diagram with PIC
This is an important tool for troubleshooting both single- and
double-effect absorption machines equipped with Product Integrated
Controls (PIC). Universal charts based on the McNeeley equations are
used to plot absorption machine cycles, to find absorber loss, and
help diagnose problems. Its extended range allows plotting of
all double-effect absorption machines.
Pad of 25 charts (GT63-01)............................... 020-501................... 6.00
Laminated Chart (GT63-02)............................... 020-516................... 7.25

Carrier University, PO Box 4808, Syracuse, NY 13221-4808 | 800-644-5544 | www.carrieruniversity.com

General Training Materials

Reciprocating Liquid Chiller Maintenance Log

Ordering Information
Applies to All Orders
Designate shipping. Be sure to include street address—we cannot
deliver to a PO Box.
n Prices and offerings are subject to change without notice.
n Where items are padded or packaged in quantities of 10 or 25, the
minimum order is one pad or package. We cannot split packages to
fill an order.
n Ground freight is prepaid and allowed. Shipped by Federal Express.
n

Fax form to 860-660-6087
or email to: carrierubookstore@carrier.utc.com
or mail to:
Carrier University
PO Box 4808 / TC-1
Syracuse, New York 13221-4808

For Credit Card Orders
Please complete Literature Order Form with
all necessary information and return to Carrier
University to obtain your order number and total
dollar amount. You will be provided a link to our
secure site to enter your credit card information.
Your order will be shipped upon credit card
approval. If you are tax exempt, please provide
your tax-exempt certificate.

Discounts
n Volume

Discounts – A 10% discount is applied to orders that total
$1,500.00 and up.
n We will calculate discounts when placing orders. Fill in order form
using prices found on website.
n List quantity, catalog number, description, price and extended price
for each item.
n Sales tax will be added to your order, unless you are tax exempt.
If you are tax exempt, please provide a tax-exempt certificate.

Carrier Offices and Distributors —
Domestic & International
Purchase using Carrier Corporation standard ordering
procedures – SAP (distributors) or email (Carrier offices)
GPCARInHouseOrders@carrier.utc.com

International Customers — Non-Carrier Companies
We regret that international orders cannot be accepted.
Please contact your local Carrier office or distributor.

Canada Orders — Non-Carrier Companies
We regret that international orders cannot be accepted.
Please contact your local Carrier office or distributor.

Phone: 800-644-5544 Option 2
Fax: 860-660-6087
Email: carrierubookstore@carrier.utc.com

Carrier University Literature Order Form

For Credit Card Orders:

Fax this form to 860-660-6087 or
email to: carrierubookstore@carrier.utc.com
or mail to: Carrier University
Bynum Training Center
PO Box 4808
Syracuse, New York 13221-4808

Please complete this form with all necessary information
and return to Carrier University to obtain your order number
and total dollar amount. You will be provided a link to our
secure site to enter your credit card information. Your order
will be shipped upon credit card approval.

Ship To Address:
Company Name:
Attn:
Street:

CANNOT SHIP TO PO BOXES

City/State/ZIP:
Phone:
Email:

PO Number:
Special Instructions:
Item

Quantity Ordered

Catalog No.

Description

Unit Price

Extended Price

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Ground Freight is prepaid and allowed.

If you are tax exempt, please enclose a tax-exempt certificate.

Minimum Order
Amount $10.00

Subtotal
Sales Tax

Total

Carrier University, PO Box 4808, Syracuse, NY 13221-4808 | 800-644-5544 | www.carrieruniversity.com

Orders

Shipping

Carrier University
Bynum Training Center
PO Box 4808
Syracuse, NY 13221-4808
1-800-644-5544
1-860-660-6087 fax
carrieruniversity@carrier.utc.com

CarrierUniversity.com
Cat. no. 06-020-315 – 1.1.18

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Create Date                     : 2018:01:04 17:16:31-05:00
Creator                         : Adobe InDesign CC 2017 (Macintosh)
Modify Date                     : 2018:01:31 12:59:16-05:00
Language                        : en-US
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Metadata Date                   : 2018:01:31 12:59:16-05:00
Creator Tool                    : Adobe InDesign CC 2017 (Macintosh)
Instance ID                     : uuid:1a5c951e-4698-4b3e-835b-185c7e32074e
Original Document ID            : xmp.did:752F804DA42068118A6DE6D2BDC01544
Document ID                     : xmp.id:c1ebaad3-6895-4981-93a2-2df394ccbd8f
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:90682f54-7dfa-44d6-9e1a-539fc093e508
Derived From Document ID        : xmp.did:72F6C8FC51206811822A882513BDB8CC
Derived From Original Document ID: xmp.did:752F804DA42068118A6DE6D2BDC01544
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Macintosh)
History Changed                 : /
History When                    : 2018:01:04 17:16:31-05:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 32

EXIF Metadata provided by EXIF.tools

INFINITY 24ANA TRAINING MATERIALS CATALOG

Navigation menu

Versions of this User Manual:

Views

Navigation