61187801L1 8A Total Access 5000 DS1 Line Module

User Manual: Total Access 5000 DS1 Line Module

Open the PDF directly: View PDF PDF.
Page Count: 2

The pure IP/Ethernet core of the Total Access
5000 is ideal for supporting emerging services
like IPTV and VoIP, but there remains a large
embedded base of traditional DS1 circuits
deployed. These DS1s are used to support a
multitude of different services today including
business service delivery, copper transport for
digital loop carriers and cell site backhaul. In
fact, more than 80% of business complexes
today only have copper access available. The
Total Access 5000 allows these traditional, high
revenue circuits to be transported efficiently
over a converged Ethernet infrastructure with
newer emerging services like IPTV.
The DS1 Line Module supports
Pseudowire Emulation Edge-to-Edge (PWE3
RFC 4553). PWE3 allows the transport of a
traditional DS1 circuit over Ethernet. Two
structure formats are supported: Circuit
Emulation Service over IP (CESoIP) and
Structured Agnostic TDM over Packet (SAToP).
SAToP provides traditional DS1 circuit trans-
DS1 Line Module
Total Access® 5000 DS1 Line Module
port without visibility to the payload. CESoIP
(future availability) provides visibility to the
DS0 layer, allowing the DS1 Line Module to
groom and pack DS0s from multiple remote
terminals before handing off to a traditional
TDM interface.
Front panel LEDs include power, card
status and loop status for each network
uplink. The DS1 Line Module supports craft
interface management via the Total Access
5000 System Controller Module (SCM). More
comprehensive management is available
using the Total Access Element Management
System (EMS).
All provisioning is supported through the
SCM communications link. All provisioning
data is stored in nonvolatile memory for
recovery after a power loss and supports
optional auto-provisioning via the SCM.
Product Features
■ Provides 32 DS1 interfaces
■ Up to 320 Redundant DS1s per
Total Access 5000
■ RFC 3985 Pseudowire Emulation
Edge-to-Edge (PWE3) support
■ Supported by Total Access EMS
■ Industry-leading 10-year
warranty
Specifications subject to change without notice. ADTRAN and Total Access are
registered trademarks of ADTRAN, Inc. All registered trademarks and trade-
marks mentioned in this publication are the property of their respective owners.
Product Specifications
Mechanical
■ Dimensions: 9.25 in. H x 0.8 in. W x 9.25 in. D
Interfaces
■ Network Interface: DSX-1
■ Physical Interface:
• Requires LMIO2 CH64 BRIDGED
• Female CH64 connector for subscriber termination
Regulatory Standards
■ NEBS Level 3
■ GR-1089 CORE
■ GR-63 CORE
■ NRTL Listed
■ FCC Part 15
Management
■ Remote management through SNMP and TL1
■ Ethernet interface for SNMP
Environmental
■ Operating Temperature: -40°C to +65°C
■ Storage Temperature: -40°C to +70°C
■ Relative Humidity: Up to 95%, noncondensing
DS1 Line Module
Total Access 5000 DS1 Line Module
Ordering Information
Equipment Part #
TA5000 DS1 32-PORT LINE MODULE 1187801L1
TA5000 LMIO2 CH64 BRIDGED 1187400L1
ADTRAN, Inc.
901 Explorer Boulevard
Huntsville, AL 35806
P.O. Box 140000
Huntsville, AL 35814-4000
256 963 8000 voice
256 963 8030 fax
General Information
800 9ADTRAN
info@adtran.com
www.adtran.com
Pre-Sales
Technical Support
888 5ADTRAN
support@adtran.com
www.adtran.com/support
Where to Buy
800 827 0807
www.adtran.com/where2buy
Post-Sales
Technical Support
800 726 8663
support@adtran.com
www.adtran.com/support
Regional Offices
Dallas, TX
972 830 9070
Denver, CO
303 471 9150
Kansas City, KS
800 471 8649
Newark, NJ
800 471 8656
Ontario, Canada
416 290 0585
Quebec, Canada
877 923 8726
San Antonio, TX
888 223 7671
International Inquiries
+1 256 963 8716 voice
+1 256 963 6300 fax
international@adtran.com
www.adtran.com/international
61187801L1-8A October 2006
Copyright
©
2006 ADTRAN, Inc.
All rights reserved.
ADTRAN is an ISO 9001, ISO 14001
and a TL 9000 certified supplier.
Ethernet
Central Office Remote Terminal
PW
CE
CE
CE
CE
PW
PsuedowireAttachment Circuit Attachment Circuit

Navigation menu