TR29 Remote Control Control010611
2014-01-16
: Tr29 Remote Control010611 tr29 remote control010611 images 1148 p4dbimg
Open the PDF directly: View PDF 
.
Page Count: 1
| Download | |
| Open PDF In Browser | View PDF |
TR29 Remote Control SPECIFICATION and INSTRUCTION SHEET DESCRIPTION: One Ceiling Fan and Light, 6 Speed, Reversing Remote Control FAN MODEL USED: See Catalog or visit our website www.fanimation.com for more information How to Wire and Operate Your TR29 Remote Control NOTE: If fan or supply wires are different colors than indicated, have this unit installed by a qualified electrician. WARNING To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. NOTE: If you are not sure if the outlet box is grounded, contact a licensed electrician for advice, as it must be grounded for safe operation. Figure 1 1. To make fan operational, install 23A/12V battery (included) in hand-held remote transmitter, with fan power off, arrange code switches to desired code setting. Then follow the remote code setting process. (If not used for long periods of time, remove battery to prevent damage to transmitter). Store the remote away from excessive heat or humidly (Figure 1). Figure 2 2. Remote Code Setting Process: Follow the below steps to use the SET button Step 1 Set code switches to desired code. Turn fan power on, press and hold SET button with a ball-pen or similar object on back of remote for 5 seconds within 60 seconds of powering fan in order to synchronize with fan motor. Step 2 Speed setting: After setting the transmitter learning, press the highest speed setting to set the rotational speed. This can take up to 120 seconds to adjust speed. Step 3 Same as step 3, reverse and press the highest speed, speed rotation again can take up to 120 seconds to reach speed setting selected. NOTE: If you want to change the blades: turn the power off→ change the blades →turn the power on →replay the setting process. 3. The remote buttons instruct as below: Fan speed: I = minimum speed II = low speed III = medium low speed IV = medium speed V = medium high speed VI = high speed Button: This button turns the fan off. Reverse button: This button is to control fan direction. Light button: The button is to control light, Infinite light levels are available by holding the light on/off button (Figure 2). Code Switches Figure 3 4. “D” and “ON” dip switch: The “ON” selection is the light dimmable selection and is to be used with all bulbs except bulbs other than CFL. The “D” selection is the light on only (no dimming function) and is to be used with CFL bulbs as CFL bulbs cannot be dimmed. The receiver provides the following protective function: 1. Lock position: The DC motor has a built-in safety against obstruction during operation. If something stuck the fan. The motor will be stopped and disconnect power after 30 seconds of interruption. Please remove obstacles before re-set. 2. Over 80W protection: When the receiver detects motor power consumption which is greater than 80W, the receiver power will be stopped and operation will immediately discontinue. Turn the receiver power on after 5 seconds. (Figure 3) 10983 Bennett Parkway Zionsville, IN 46077 (888) 567-2055 • FAX (866) 482-5215 Outside U.S. call (317) 733-4113 Visit Our Website @ www.fanimation.com Copyright 2011 Fanimation 2011/01
Source Exif Data:
File Type : AI File Type Extension : ai MIME Type : application/vnd.adobe.illustrator PDF Version : 1.5 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39 Create Date : 2011:01:04 16:51:24+08:00 Modify Date : 2011:03:30 16:28:03-04:00 Metadata Date : 2011:03:30 16:28:03-04:00 Creator Tool : Adobe Illustrator CS4 Thumbnail Width : 200 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 21274 bytes, use -b option to extract) Version ID : 1 Rendition Class : proof:pdf Document ID : xmp.did:E830ECE1AC17E0119612A613D9780564 Instance ID : uuid:53153f0d-b5c3-4f68-b66b-2084d16023d5 Original Document ID : adobe:docid:indd:05081821-3528-11d7-b9bb-a8262ef52a11 Derived From Instance ID : uuid:d6837514-d951-48ec-a2dd-a62b979837cd Derived From Document ID : xmp.did:E730ECE1AC17E0119612A613D9780564 Derived From Original Document ID: adobe:docid:indd:05081821-3528-11d7-b9bb-a8262ef52a11 Derived From Version ID : 1 Derived From Rendition Class : proof:pdf History Action : saved, saved, saved History Instance ID : xmp.iid:BFA20B0B4612E0118E0AB840EEC55351, xmp.iid:E730ECE1AC17E0119612A613D9780564, xmp.iid:E830ECE1AC17E0119612A613D9780564 History When : 2010:12:28 13:55:19+08:00, 2011:01:04 15:25:44+08:00, 2011:01:04 16:51:17+08:00 History Software Agent : Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4 History Changed : /, /, / Format : application/pdf Title : TR29 Remote Control N Pages : 1 Has Visible Transparency : False Has Visible Overprint : True Max Page Size W : 215.900000 Max Page Size H : 279.400172 Max Page Size Unit : Millimeters Font Name : Arial-ItalicMT, Arial-BoldMT, Arial-Black, Arial-BoldItalicMT, ArialMT, ErasITC-Bold Font Family : Arial, Arial, Arial, Arial, Arial, Eras Bold ITC Font Face : Italic, Bold, Black, Bold Italic, Regular, Regular Font Type : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type Font Version : Version 2.90, Version 3.00, Version 2.40, Version 2.90, Version 3.00, Version 1.01 Font Composite : False, False, False, False, False, False Font File Name : ARIALI.TTF, ARIALBD.TTF, ariblk.TTF, ARIALBI.TTF, ARIAL.TTF, ERASBD.TTF Plate Names : Cyan, Magenta, Yellow, Black Swatch Group Name : 預設色票群組 Swatch Group Type : 0 GTS PDFX Version : PDF/X-1:2001 GTS PDFX Conformance : PDF/X-1a:2001 Trapped : False Producer : Adobe PDF library 9.00 Page Count : 1 Container Version : 11 Creator Version : 14 Creator : Adobe Illustrator(R) 14.0 For : Teresa, Bounding Box : 0 0 612 792 Image Height : 792 Image Width : 612 Image Size : 612x792 Megapixels : 0.485EXIF Metadata provided by EXIF.tools