Trimec ES110 Data Sheet

User Manual: Trimec ES110

Open the PDF directly: View PDF .
Page Count: 2

ES110 Series Electric Strike

General Description

The ES110 isa cost efficient robust electric strike

with a solid construction of one-piece cast

aluminium body and stainless steel striker.

Having a deeper than normal strike-keeper area,

ES110 is designed to work with an extensive

range of locks and offers the same level of

security and reliability usually provided by more

expensive electric locking solutions.

Extension lipsare available to accommodate the

installation of electric strikes on door frames

with different thickness.The ES110 product

range of patented electric strikes are suitable for

use with all access control installations where

flexibility,security and lower cost are required.

Key Features

•Fail safe/fail secure changeable on site

•Stainless steel striker for extra strength and

durability

•Stainless steel locking pins

• Available in 12 or 24Vdc

•Optional mounting kit

• Installation template

•IP56 weather resistant version available

•Suitable For 18mm latch with a3mm door gap

• Australian designed and made

• 5 Year Warranty

Applications

•Exposed areas (weather resistant models)

•High traffic areas

•Open in/open out doors

•Suitable for use with all access control systems

Standards and Compliance

Successfully fire rated up to 4hrs on fire door

assemblies in accordance with AS1905.1. 2005

(Part 1: Fire resistant door sets)

Approved to UL1034 (highest level)

CEApproved

Weather Resistant Version (IP56) available

Hour

4

9

ES110 Series Electric Strike

Product Description Part Number

12V Electric Strike

12V Fail Safe StainlessSteel Face Plate (A) 110111-050

12V Fail Safe Weather Resistant St ainless Steel Face Plate (A) 110111-060

12V Fail Safe Long Stainless Steel Face plate (B) 110111-100

12V Fail Safe Weather Resistant Long Stainless Steel Faceplate (B) 110111-110

12V Fail Safe Adams Rite Faceplate Stainless Steel 110111-140

12V Fail Safe Weather Resistant Adams Rite Faceplate Stainless Steel 110111-160

12V Fail Safe Adams Rite Faceplate St ainless Steel - No Lip 110111-150

12V Fail Safe StainlessSt eel Faceplate - No Lip 110111-190

12V Fail Secure Adams Rite Faceplat e Stainless Steel 110112-140

12V Fail Secure Weather Resistant Adams Rite Faceplate Stainless Steel 110112-160

12V Fail Secure Long Stainless Steel Faceplate (B) 110112-100

12V Fail Secure StainlessSt eel Faceplate - No Lip 110112-190

12V Fail Secure StainlessSt eel Faceplate (A) 110112-050

12V Fail Secure Weather Resistant Stainless Steel Faceplate (A) 110112-060

24V Electric Strike

24V Fail Safe StainlessSteel Faceplat e (A) 110113-050

24V Fail Safe Adams Rite Faceplate Stainless Steel 110113-140

24V Fail Safe Adams Rite Faceplate Stainless Steel - No Lip 110113-150

24V Fail Safe Weather Resistant St ainless Steel Faceplate 110113-060

24V Fail Safe Adams Rit e Faceplate Stainless Steel 110113-160

24V Fail Safe Long Stainless Steel Faceplate (B) 110113-100

24V Fail Safe Weather Resistant Long Stainless Steel Faceplate (B) 110113-105

24V Fail Secure StainlessSteel Faceplat e (A) 110114-050

24V Fail Secure Weather Resistant Adams Rite Faceplate Stainless Steel 110114-140

Note: For additional face plate opt ionssee page 10.

Product Description Part Number

15mm Extension Lip 220110-502

25mm Extension Lip 220110-503

50mm Extension Lip 220110-504

Mounting Kit 220200-518

Pins-spring-stopkit (x5) 200110-100

24V Solenoid 220100-502

Ordering Informat ion Accessories

ES110 with 15mm ext lip

- “A” Plate

ES110 with 25mm ext lip

- “A” Plate

ES110 with 50mm ext lip

- “A” Plate

86mm

123.7mm

32mm

19mm

43mm

32mm

123.7mm

86mm

19mm

43mm

123.7mm

86mm

19mm

32mm

43mm

35mm

50mm

25mm

15mm

ES110 Technical Informat ion

Voltage

Current

Solenoid

Monitor ing

Holding Force

Endurance

Environment

Body

Keeper

Specification Statement

Where Power to Lock and Power to Open

functions may be required in the same building,

the strike must be interchangeable from either

“Power to Lock” or “Power to Open” on site.

The electric strike should not consume current

greater than 243mA @ 12Vdc or 187mA @

24Vdc and have a solenoid suitable for

continuous use. Certifications must include CE,

C-tick and 4hr fire rating.

The strike should have a minimum holding

force of 680kg, and an endurance rating of 1

million cycles.

12 or 24Vdc

243 mA @ 12Vdc –187m A @ 24Vdc

Solenoidsare rated for continuous use.

None

680 kg Static Strength Rating

Cycle tested to 1,000,000 operations

Operational temperature range-20°Cto + 60°C

Weather resistant construction available. (IP56)

Cast Aluminium Construction

StainlessSteel