U8031A Triple Output DC Power Supply 30V 6A 2x 5V 3A 375W Data Sheet Brochure
U8032A-Triple-Output-DC-Power-Supply-Data-Sheet-Brochure U8032A-Triple-Output-DC-Power-Supply-Data-Sheet-Brochure
User Manual: U8031A-Triple-Output-DC-Power-Supply-30V-6A-2x-5V-3A-375W-Data-Sheet-Brochure
Open the PDF directly: View PDF 
.
Page Count: 9
| Download | |
| Open PDF In Browser | View PDF |
Keysight U8030 Series Triple-Output DC Power Supplies Data Sheet Introduction Higher Power. Better Reliability. Unrivalled Performance. Keysight Technologies, Inc. extends its family of basic DC power supplies to include a one of a kind power supply that offers up to 375 W power at three outputs. Equipped with output sequencing capability, it allows you to generate output sequences even with minimal programming skills. Each power supply is also built with excellent load regulation and clean output noise for continued stability. With these and many other features, you get a solid and reliable triple-output power supply at an unsurpassed performance. The U8030 series offers two models — the U8031A and U8032A, each with different voltage and current ratings to cater to your needs. Both models are well-regulated compact bench-tops with total output of 375 W, making it an ideal power source alternative in electronics manufacturing, research and development as well as education sector. Generate power supply output sequences — No extensive programming skills necessary The output sequencing capability is carefully thought out for your convenience and ease when operating. Designed to perform automation function, our U8030 series is well-suited even for those with minimal programming skills. With easy-to-use knob and intuitive keypads, you can now set your desired output sequences for margin test, burn-in test and other general purpose tasks in an industrial setting. Key Features –– Provides total power of 375 W for three outputs –– Output sequencing capability –– Excellent load and line regulation (CV: < 0.01% + 2 mV; CC: < 0.02% + 2 mA) ensures stable output –– Provides clean output with ≤ 1 mVrms (0.5 mVrms typical) noise –– Fast < 50 µs transient response for stable testing –– Dual display shows both voltage and current reading –– Over-voltage and over-current protection –– Security features: keypad lock and physical lock mechanism 03 | Keysight | U8030 Series Triple-Output DC Power Supplies – Data Sheet Unrivalled performance— with low output noise and excellent load regulation Added safety features— with OVP, OCP and physical lock mechanism The U8030 series provides excellent load and line regulation (CV: < 0.01% + 2 mV; CC: < 0.02% + 2 mA) to ensure stable output even when load changes. This is crucial especially when dealing with noise-sensitive circuits that demand clean power. At a wide bandwidth of 20 Hz to 20 MHz, our bench power supplies continue to provide clean output at the lowest Vrms ≤ 1 mVrms (0.5 mVrms typical), leaving your signals uncontaminated and ensuring minimal interference to your Device-Under-Test (DUT). Safety is an important consideration when dealing with power. Users may not only want to protect themselves from exposure to current, but also the additional costs incurred to their investment (DUT). Our U8030 series power supplies are integrated with an array of security features such as over-voltage (OVP) and over-current (OCP) protection to mitigate these risks. Figure 1. Output sequencing made easy with intuitive keypads Figure 2. Backlight on/off feature with dual reading (voltage and current) on an LCD display Additionally, security features such as keypad locking capability prevents accidental front panel usage while physical lock mechanism which is strategically located at the rear of the unit provides secure instrument storage. Differentiated features— allowing you to work better Both models of the U8030 series come with a set of features to suit your needs while remaining easy to use. The LCD screen displays both voltage and current readings in a one-view panel while the all ON/ OFF button allows multiple outputs to be controlled simultaneously. Additionally, the auto-track feature simplifies setup between output 1 and output 2. With these, you get a solid bench power supply plus a set of convenient and easy to use features. Figure 3. Simplifies Output 1 and Output 2 setup with tracking feature 04 | Keysight | U8030 Series Triple-Output DC Power Supplies – Data Sheet Front Panel Description Essential security features: Over-voltage protection (OVP)/ Over-current protection (OCP), keypad lock and physical lock mechanism Output sequencing function: Generates output sequences without a PC LCD display: Allows dual reading (voltage and current) in one display Physical lock mechanism as illustrated Rotary knob: Allows quick and easy voltage and current setting Keypad lock/unlock: Locks front panel to prevent accidental change Backlight On/Off: Switches backlight off when not needed Channel control: Allows channels to be controlled individually/simultaneously (ON/ OFF) Figure 4. The U8032A as illustrated Tracking: Auto-tracking between output 1 and output 2 with single control 05 | Keysight | U8030 Series Triple-Output DC Power Supplies – Data Sheet Key Specifications Electrical Specifications Table 1.1 Electrical specifications 1 Parameter U8031A U8032A Total power output (W) 0 – 375 W Voltage output (V) 0 to 30 V 0 to 60 V 0 to 6 A 0 to 3 A Output Channel 1 & 2 (@ 0 to 40 °C) Current output (A) Output Channel 1 & 2 (@ 0 to 40 °C) Number of outputs Three isolated outputs – Two variable: CV and CC operation – One fixed: CV operation only 5 V fixed output 2 – Voltage/Current output: 5 V, 3A – Output accuracy: ≤ 5% or (5 V ± 0.25 V) – Vrms: < 2 mVrms, or Vpp: < 50 mVpp – Load and line regulation: ≤ 5 mV – Overload condition: 3 A + 20% (typical) Output Channel 3 Line & load regulation (for variable output) Ripple & noise Based on calculation at temp 18 - 28 °C and bandwidth at 20 Hz to 20 MHz Load transient response time CV: < 0.01% + 2 mV CC: < 0.02% + 2 mA CV: ≤1 mVrms, 0.5 mVrms (typical) or ≤ 10 mVpp, 5 mVpp (typical) CC: ≤ 1 mArms < 50 us Within 15 mV from full load to half load and from half load to full load Stability (output drift) Following a 30-minute warm-up, with the output in the ON state according to the operating mode (CC with load or CV), and with a change in the output over 8 hours under constant load, line, and ambient temperature. Voltage: < 0.02% Current: < 0.1% Programming accuracy (23 °C ± 5 °C) CV: ≤ 0.25% + 15 mV CC: ≤ 0.30% + 15 mA Meter readback accuracy (23 °C ± 5 °C) CV: ≤ 0.25% + 10 mV CC: ≤ 0.25% + 10 mA Programming/meter resolution Voltage: 10 mV (4 digits) Current: 10 mA (3 digits) Maximum output float voltage ±240 Vdc 1. The specifications stated are based on a 1 hour warm-up period. 2. The specifications referenced in this row are for Output Channel 3 (5 V fixed output). All other specifications listed in this table are intended for Output Channel 1 and 2, unless otherwise stated. . 06 | Keysight | U8030 Series Triple-Output DC Power Supplies – Data Sheet Physical characteristics Table 1.2 Physical characteristics Parameter U8031A/U8032A Display LCD with amber backlight Rotary knob for reading adjustment Yes Size 4U, half rack Dimensions (H x W x D) 179.0 x 212.3 x 379.0 mm Weight 8.2 kg Supplemental characteristics Table 1.3 Supplemental characteristics Parameter U8031A Temperature coefficient (for 12 months) ±(% of output + offset) U8032A Output – CV: (0.01% + 1 mV)/°C – CC: (0.01% + 1 mA)/°C OVP, OCP – CV: < 0.05%/°C – CC: < 0.05%/°C Output voltage overshoot <1V During turn-on or turn-off of AC power, if output control is set less than 1 V Voltage programming speed to within 1 % of total excursion 30 V 60 V Up 80 ms 80 ms 30 ms 150 ms 200 ms 100 ms 30 ms 300 ms Down Full load No load Full load No load Over temperature protection Yes Last memory setting enabled Yes Three memory storage locations for voltage and current settings Yes Erasing non-volatile memory Yes, erasable through front panel Rack mount capability Yes, front panel and rear have rack-mountable support 07 | Keysight | U8030 Series Triple-Output DC Power Supplies – Data Sheet AC power input specifications Table 1.4 AC power input specifications Parameter U8031A/U8032A Input power option (selectable) 100 Vac ± 10%, 47 to 63 Hz 115 Vac ± 10%, 47 to 63 Hz 230 Vac ± 10%, 47 to 63 Hz Maximum input power 600 VA Fuse External, located at the rear panel Environmental specifications Table 1.5 Environmental specifications Parameter U8031A/U8032A Operating temperature 0 to 40 °C Storage temperature –40 to 70 °C Humidity 15% RH (relative humidity) to 85% RH at 40 °C (non condensing) Altitude Up to 2000 m Fan acoustic noise < 60 dB sound power Environment of use – Installation category II – Pollution Degree 2 Connection specifications Table 1.6 Connection specifications Parameter U8031A/U8032A Output connections +Out, –Out, and chassis ground on the front panel. (Either positive or negative output terminal may be grounded or can be operated floating at up to a maximum of 240 V off ground. Total output voltage to ground must not exceed 240 Vdc) Binding posts Output binding post located horizontally and side by side I/O connections N/A AC input 3 pins standard IEC AC power connector with fuse and line selection at the rear 08 | Keysight | U8030 Series Triple-Output DC Power Supplies – Data Sheet Protection Features Table 1.7 Protection features Parameter U8031A Overvoltage protection accuracy ± (% of output + offset) < 0.5% +0.5 V Overvoltage protection programmable range 0.1 to 33.0 V Overvoltage protection response time < 10 ms Overcurrent protection accuracy ± (% of output + offset) < 0.5% + 0.5 A Overcurrent protection programmable range 0.1 to 6.6 A Overcurrent protection response time < 10 ms Ordering Information Included documentation: U8030 Series Product Reference CD-ROM Additional documentation: U8031A-ACF U8031A-ABA U8032A-ACF U8032A-ABA Japanese language user guide, printed English language user guide, printed Japanese language user guide, printed English language user guide, printed Calibration document: U8031A-UK6 Commercial calibration with test result data U8032A-UK6 Commercial calibration with test result data Other Options: E3600A-100 Option 1CM Test lead kit Rack-mount kit Rack-mount kits: To rack-mount a single instrument: Adapter kit (P/N 5063-9245) U8032A 0.1 to 66.0 V 0.1 to 3.3 A 09 | Keysight | U8030 Series Triple-Output DC Power Supplies – Data Sheet Evolving Our unique combination of hardware, software, support, and people can help you reach your next breakthrough. We are unlocking the future of technology. From Hewlett-Packard to Agilent to Keysight myKeysight www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. Keysight Services www.keysight.com/find/service Our deep offering in design, test, and measurement services deploys an industry-leading array of people, processes, and tools. The result? We help you implement new technologies and engineer improved processes that lower costs. Three-Year Warranty www.keysight.com/find/ThreeYearWarranty Keysight’s committed to superior product quality and lower total cost of ownership. Keysight is the only test and measurement company with three-year warranty standard on all instruments, worldwide. And, we provide a one-year warranty on many accessories, calibration devices, systems and custom products. Keysight Assurance Plans www.keysight.com/find/AssurancePlans Up to ten years of protection and no budgetary surprises to ensure your instruments are operating to specification, so you can rely on accurate measurements. Keysight Channel Partners www.keysight.com/find/channelpartners Get the best of both worlds: Keysight’s measurement expertise and product breadth, combined with channel partner convenience. www.keysight.com/find/U8030 For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Americas Canada Brazil Mexico United States (877) 894 4414 55 11 3351 7010 001 800 254 2440 (800) 829 4444 Asia Pacific Australia China Hong Kong India Japan Korea Malaysia Singapore Taiwan Other AP Countries 1 800 629 485 800 810 0189 800 938 693 1 800 11 2626 0120 (421) 345 080 769 0800 1 800 888 848 1 800 375 8100 0800 047 866 (65) 6375 8100 Europe & Middle East Austria Belgium Finland France Germany Ireland Israel Italy Luxembourg Netherlands Russia Spain Sweden Switzerland United Kingdom 0800 001122 0800 58580 0800 523252 0805 980333 0800 6270999 1800 832700 1 809 343051 800 599100 +32 800 58580 0800 0233200 8800 5009286 800 000154 0200 882255 0800 805353 Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT) 0800 0260637 For other unlisted countries: www.keysight.com/find/contactus (BP-2-23-17) DEKRA Certified ISO9001 Quality Management System www.keysight.com/go/quality Keysight Technologies, Inc. DEKRA Certified ISO 9001:2015 Quality Management System This information is subject to change without notice. © Keysight Technologies, 2012-2014, 2017 Published in USA, June 20, 2017 5990-9321EN www.keysight.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Format : application/pdf Description : Test and Measurement Creator : Keysight Technologies Rights : his information is subject to change without notice..© Keysight Technologies, 2016.Published in USA, 2016.5992. Create Date : 2017:06:20 10:44:31-07:00 Metadata Date : 2017:06:20 10:44:42-07:00 Modify Date : 2017:06:20 10:44:42-07:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:b66a67a4-cc4d-4ebb-a28e-9363b1d0bee4 Original Document ID : xmp.did:5259B79ADEA3E311A5169BB3BD84A224 Document ID : xmp.id:80004E11E055E711A87AF738555DD25F Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:7F004E11E055E711A87AF738555DD25F Derived From Document ID : xmp.did:D904B1E9DE55E711A87AF738555DD25F Derived From Original Document ID: xmp.did:5259B79ADEA3E311A5169BB3BD84A224 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2017:06:20 10:44:31-07:00 Web Statement : www.keysight.com Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 9 Author : Keysight Technologies Subject : Test and MeasurementEXIF Metadata provided by EXIF.tools