USR K3 User Manual V1.0.10

• Serial to Ethernet converter (Super Port)
• Introduction
  • Overview
  • 1.2 Features
  • Applications
  • Order information
  • Electrical characteristics
• Module Test
  • Hardware connection
  • Login
  • Default parameter test
• Work mode
  • UDP mode
  • TCP Client mode
  • UDP Server mode
  • TCP Server mode
  • Httpd Client mode
• Hardware
  • Hardware
  • Pin definition
  • Connection diagram
  • LED
  • RJ45 interface
• Paramters configuration
  • Web page
  • Network command(setup software)
• Specific functions
  • Modbus RTU to ModbusTCP
  • Hardware flow control(RTS/CTS)
  • MAC address
  • Packet time and Packet length
  • Sync baud via net(2217)
  • Webserver port
  • Module id and id type
  • Device name
  • Buffer data before connected
  • Reset timeout
  • Local IP config
    • Static IP
    • DHCP
  • DNS
  • Comm param
  • Firmware revision
  • RS485
  • Firmupdate
  • Common questions
    • Work across network segment
    • Ping is OK but can not open web pages
    • After firm update, can not open web page
    • When connection established, server received serva
    • Every serval seconds, module reconnect
• Contact us
• Modified history