C Upgrade Tool_ELT5T_Mobile R03.11.00 Tool ELT5T Mobile

User Manual: UpgradeTool_ELT5T_Mobile-R03.11.00

Open the PDF directly: View PDF PDF.
Page Count: 5

DownloadC Upgrade Tool_ELT5T_Mobile-R03.11.00 Tool ELT5T Mobile-R03.11.00
Open PDF In BrowserView PDF
=====================================================================================
=======
SOFTWARE RELEASE NOTE
=====================================================================================
=======
Product
: Commercial 5tone Series FlashGrade Tool
Release
: R03.11.00
Date
: 17-Jun-2011
Language
: English
Known Unsupported
PC/ Laptop
: - Dell(TM) Latitude(TM) D620
- Dell Precision(TM) Mobile Workstations M65
(Flash Operation can still be restored if Port Replicator/ Docking Station
is used with the aforementioned system models)
NOTICE: PLEASE SAVE YOUR EXISTING CODEPLUG TO AN ARCHIVE FILE. The CPS
programming data will lost after upgrading. It is recommended
that use CPS to save an archive of the radios codeplug before
the update process. After upgrading, this archive can be used
to recover the CPS programming data of the radio.
(CPS compatibility : R05.15 or newer)
=====================================================================================
=======
Purpose Of This Release
=====================================================================================
=======
Supported features:
- Reading Radio information
- Up-version a radio to software version R03.11.00 from
previous released versions with hardware codeplug update and
saving of tuning data
Supported Software versions:
- Only official radio software release version and bands.
In this version:
R03.05.06, R03.06.06, R03.06.07, R03.06.08, R03.07.00,
R03.07.04, R03.08.00, R03.08.04, R03.08.09, R03.08.11,
R03.09.03, R03.10.00, R03.11.00
Software is updated to version R03.11.00
Codeplug is updated to version R04.03.02

file:///C|/...ocuments/DOCS/Burn%20CD/Radio%20software/CM%20CP%20Series/Flash%20Upgrade/Mobiles/5%20Tone/README.txt[2011/11/11 07:08:27 AM]

NEW SUPPORTED MODEL NUMBERS:
Sales Model S/Tanapa
Description
Cp Version
=====================================================================================
=======
M50VSF6AN2
PMUE4517A
CM360:5tMobBUHF3-Mar+ Mobile UHF3 band
04.03
=====================================================================================
=======
SUPPORTED MODEL NUMBERS:
Sales Model S/Tanapa
Description
Cp Version
=====================================================================================
=======
M50FNC9AN2
FUC1601A
CM340:5tMobAMID-Mar Mobile Mid band
04.02
M50FNC9AN2
FUC1601B
CM340:5tMobAMID-Mar Mobile Mid band
04.02
M50FNF9AN2
FUC1603A
CM360:5tMobBMID-Mar+ Mobile Mid band
04.02
M50FNF9AN2
FUC1603B
CM360:5tMobBMID-Mar+ Mobile Mid band
04.02
M50JNC9AN2
PMUD1937A
CM340:5tMobAVHF1-Mar Mobile VHF1 band
04.02
M50JNC9AN2
PMUD1937B
CM340:5tMobAVHF1-Mar Mobile VHF1 band
04.02
M50JNF9AN2
PMUD1941A
CM360:5tMobBVHF1-Mar+ Mobile VHF1 band
04.02
M50JNF9AN2
PMUD1941B
CM360:5tMobBVHF1-Mar+ Mobile VHF1 band
04.02
M50KNC9AN2
PMUD1879A
CM340:5tMobAVHF-Mar Mobile VHF2 band
04.02
M50KNC9AN2
PMUD1879B
CM340:5tMobAVHF-Mar Mobile VHF2 band
04.02
M50KNF9AN2
PMUD1881A
CM360:5tMobBVHF-Mar+ Mobile VHF2 band
04.02
M50KNF9AN2
PMUD1881B
CM360:5tMobBVHF-Mar+ Mobile VHF2 band
04.02
M50QNC9AN2
PMUE2023A
CM340:5tMobAUHF-Mar Mobile UHF1 band
04.02
M50QNC9AN2
PMUE2023B
CM340:5tMobAUHF-Mar Mobile UHF1 band
04.02
M50QNF9AN2
PMUE2025A
CM360:5tMobBUHF-Mar+ Mobile UHF1 band
04.02
M50QNF9AN2
PMUE2025B
CM360:5tMobBUHF-Mar+ Mobile UHF1 band
04.02
M50RNC9AN2
PMUE2019A
CM340:5tMobAUHF2-Mar Mobile UHF2 band
04.02
M50RNC9AN2
PMUE2019B
CM340:5tMobAUHF2-Mar Mobile UHF2 band
04.02
M50RNF9AN2
PMUE2021A
CM360:5tMobBUHF2-Mar+ Mobile UHF2 band
04.02
M50RNF9AN2
PMUE2021B
CM360:5tMobBUHF2-Mar+ Mobile UHF2 band
04.02
M50SNC9AN2
PMUE2164A
CM340:5tMobAUHF3-Mar Mobile UHF3 band
04.02
M50SNC9AN2
PMUE2164B
CM340:5tMobAUHF3-Mar Mobile UHF3 band
04.02
M50SNF9AN2
PMUE2165A
CM360:5tMobBUHF3-Mar+ Mobile UHF3 band
04.02
M50SNF9AN2
PMUE2165B
CM360:5tMobBUHF3-Mar+ Mobile UHF3 band
04.02
M50TRC9AN2
PMUE2180A
CM340:5tMobAUHF4-Mar Mobile UHF4 band
04.02
M50TRC9AN2
PMUE2180B
CM340:5tMobAUHF4-Mar Mobile UHF4 band
04.02
M50TRF9AN2
PMUE2183A
CM360:5tMobBUHF4-Mar+ Mobile UHF4 band
04.02
M50TRF9AN2
PMUE2183B
CM360:5tMobBUHF4-Mar+ Mobile UHF4 band
04.02
M50FNF4AN2
FUC1603B
CM360:5tMobBMID-Marlin+ Mobile Mid band
04.01
=====================================================================================
=======
WARNING
=====================================================================================
=======
file:///C|/...ocuments/DOCS/Burn%20CD/Radio%20software/CM%20CP%20Series/Flash%20Upgrade/Mobiles/5%20Tone/README.txt[2011/11/11 07:08:27 AM]

PLEASE READ: WARNING FOR ALL RADIO TYPES
PLEASE SAVE YOUR EXISTING CODEPLUG AS AN ARCHIVE FILE. The codeplug programming
information may be lost after the update process therefore, it is recommended to read
the radio using the CPS, and save an archive of the radio's codeplug before starting
the update process. After the update, this archive can now be used to recover the codeplug
programming information by programming the archive back into the radio.
Ensure the radio updating process is not interrupted. Interruption will cause the
radio not to operate anymore and attempting to update the radio again will NOT be successful.
Do NOT create a shortcut of the program (e.g. on your desktop), the program might not be
able to find the data files in that case!
Do not remove the programming cable or turn off the radio while the update is in progress.
In case of failure during the updating, a message box will appear to guide the user to
recover from the failure, if possible.
The flashing rate can be changed only by restarting the program.
You may not run more than one copy of the program at the same time.
Baud rate 115k can only be supported by certain Radio Interface Boxes (RIB).
Use 19k baud rate when using a RIB.
=====================================================================================
=======
HOW TO INSTALL AND RUN THE SOFTWARE
=====================================================================================
=======
Installation of the software can be completed by double clicking the setup
file "UpgradeTool_ELT5T_Mobile-R03.11.00.exe". This file will be in the
downloaded up-version kit.
REQUIRED EQUIPMENT
For the usage of this software the following radio accessories are required:
Connect all the items using one of the following sequences:
Rib-less Configuration
-----------------------PC com port >> 9 to 25 pin converter >> Programming Cable (AARKN4081)
>> Flash Adapter (FKN8096A) >> Radio.
Note: Ensure the Flash Adapter switch is in the 'CPS' position.
=====================================================================================
=======
file:///C|/...ocuments/DOCS/Burn%20CD/Radio%20software/CM%20CP%20Series/Flash%20Upgrade/Mobiles/5%20Tone/README.txt[2011/11/11 07:08:27 AM]

INSTRUCTIONS ABOUT UPGRADING PROCESS
=====================================================================================
=======
These instructions must be followed in the exact order to work properly
1. Read through the Firmware Kit instructions and make sure your radio meets updating
specifications. This file can be found through Start Menu >> Programs >>
Professional Radios Upgrade Tool>> UpgradeTool ELT5T Mobile-R03.11.00 >> README
2. Power on the radio using a 12 vdc power supply or in an automobile. If the automobiles
ignition is on, turn off all other accessories to ensure the quietest possible environment.
Do not run the engine during this procedure.
3. Start the Firmware Kit from the Start Menu >> Programs >> Professional Radios
Upgrade Tool>> UpgradeTool ELT5T Mobile-R03.11.00 >> UpgradeTool ELT5T Mobile-R03.11.00
4. Once the Firmware Kit screen appears, click on the 'PROGRAM' button.
5. After the tool is launched, check the the flash Baud rate from menu Options > Configuration.
The default baud rate is 19,200. Select 'OK' if you want to use the default value or you can
select a different baud rate and then click on the 'OK' button
6. A message box will appear with instructions to put the radio in the Bootstrap mode.
-Turn off the radio.
-Switch the flashing adapter into the 'Flash' mode.
-Turn the radio on and make sure the radio doesn't boot up like normal.
7. After clicking 'OK' updating should begin if the radio has been properly put in bootstrap mode.
A window will pop up initially saying "Please Wait" then the window will read "Progress" and
give you a percentage of completion. Instructions in the window will give indications to each
process of the update.
8. A window will pop up when the update is complete reading "Upgrade Successfully done!."
9. Click 'OK' return the flashing switch to the 'CPS' position, and remove the programming & flashing
cable. Power off and on the radio to complete the process and to get the radio out of the bootstrap mode.
10. Connect another radio and repeat the process from Step 4.
=====================================================================================
=======
TROUBLESHOOTING
=====================================================================================
=======
If Upgradetool will not start
1. Make sure this is an original version of the kit and not copied off another
file:///C|/...ocuments/DOCS/Burn%20CD/Radio%20software/CM%20CP%20Series/Flash%20Upgrade/Mobiles/5%20Tone/README.txt[2011/11/11 07:08:27 AM]

computer
2. Make sure another copy is not running on your computer.
If an error is returned when you select program, check the following:
1. On RIB setting menu, set 'Echo' for single-wired bootstrap. 'No Echo' is for
dual-wired bootstrap. Professional radios use single-wired bootstrap.
2. On the Comm setting menu, make sure that the port selected is the one to
which the radio is connected.
If an error is returned immediately after the radio is in bootstrap, click Ok and
switch the flash adapter to 'CPS' mode, turn the radio off, on and try again.
=====================================================================================
=======
RADIO SOFTWARE RELEASE NOTE
=====================================================================================
=======
Release elt5t_mobile-R03.11.00
Previous Release elt5t_mobile-R03.09.03

file:///C|/...ocuments/DOCS/Burn%20CD/Radio%20software/CM%20CP%20Series/Flash%20Upgrade/Mobiles/5%20Tone/README.txt[2011/11/11 07:08:27 AM]
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2011:11:11 07:08:26+02:00
Modify Date                     : 2011:11:11 07:09:04+02:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2011:11:11 07:09:04+02:00
Format                          : application/pdf
Title                           : C:\Users\phime\Documents\DOCS\Burn CD\Radio software\CM CP Series\Flash Upgrade\Mobiles\5 Tone\README.txt
Document ID                     : uuid:7ba969ba-804c-4cbc-bdf6-964161ab39d9
Instance ID                     : uuid:20d88512-74f5-4da5-8141-c745522c09a1
Producer                        : Acrobat Web Capture 9.0
Page Count                      : 5
EXIF Metadata provided by EXIF.tools

Navigation menu