V R1042DP TE4U_insidePage TE4U Users Guide WEB Version 2010 0216
User Manual: V-R1042DP-TE4U
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
10 Switches and Adjustments Marshall Electronics 1910 East Maple Ave. El Segundo, CA 90245 Tel.: 800-800-6608 • 310-333-0606 Fax: 310-333-0688 www.LCDRacks.com Email: sales@lcdracks.com Power Top View Brightness, Color, and Contrast controls RATIO: Each push of the button switches between 4:3 and 16:9 modes MARK (16:9 mode only): Each push of the button switches between 16:9 standard, 4:3 marker (shaded), and 4:3 marker (cropped) RATIO Settings V-R1042DP-TE4U 4:3 Mode User’s Guide 16:9 Mode MARK Settings (16:9 Mode Only) Product Overview Standard 4:3 Marker (Shaded) 4:3 Marker (Cropped) Features Standard Accessories Optional Accessories Electrical Specifications 11 Mechanical Specifications Warranty Marshall Electronics warranties to the first consumer, that this V-R1042DP-TE4U portable monitor will, under normal use, be free from defects in workmanship and materials, when received in its original container, for a period of one year from the purchase date. This warranty is extended to the first consumer only and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right, not to honor the warranty set forth above. Therefore, labor and parts may be charged to you. This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifications in design or construction, voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any warranties other than those described above, or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above. Due to constant effort to improve products and product features, specifications may change without notice. Ver 2010-0216 Faceplate Cleaning Operational Setup Input Connectors Switches and Adjustments Warranty 1 2 3 4 5 6 7 8 9 10 11 ProductOverview 1 The V-R1042DP-TE4U is a dual 10” high resolution LCD monitor for broadcast and professional video applications. Featuring an ultrathin 3/8” bezel, this model provides the most possible screen area in 4RU and is ideal for video wall applications. The V-R1042DPTE4U uses our award-winning all-digital TFT-Megapixel™ LCD panel with 2.4 million pixels, along with our HyperProcess™ de-interlacing algorithm producing the smoothest motion available on a TFT LCD. Video is scaled to fit on the screen in the highest possible resolution utilizing a state-of-the-art LSI with 6x6 pixel interpolation, precision gamma correction, and Match Color Conversion™ to produce the highest quality images available. 210 Plastic Cleaner & Polish and 210 Plus Cleaner TFT-MegaPixel™ Display 1024x768 Dots (2.4 Million Pixels) All signals remain completely digital to provide the most exact images available. SD/HD SDI Input SMPTE 259M-C, 292M / ITU-R BT.601; 1080i/60,59.95,50; 1080psF/24,23.98; 1035i/60, 59.94; 720p/60,59.94,50,30,29.97,25 Durable metal enclosure Protection for all connections and controls with strategically placed ventilation for use in harsh environments Protective Screen Cover Optical grade polycarbonate screen cover with Antireflective/Antiglare coating HyperProcess™ Display interlaced images without smearing or sacrificing of temporal resolution with our proprietary interpolation algorithms. Images are then displayed at a sample rate equal to the frame rate. MatchColor Conversion™ Factory programmed to closely match typical SMPTE/CIE color metric and color temperature specifications. This model is adjusted for D-65 color temperature and 72% SMPTE color gamut OSD On screen display of Format and Ratio 50,000 hour backlight life Backlights are the most common failure on a TFT/LCD monitor. This backlight system has an MTBF of 5 years and uses specially designed lamps to provide brighter images. Tally 2 LEDs (Green, Red) per monitor Standard Accessories Accessories Supplied with the V-R1042DP-TE4U • User’s manual • “Brick” type 12VDC power supply with 2-pin twist-lock connector 4 Optional Accessories Mount for IDX Batteries Craftics, Inc. 186 Lincoln Street Boston, MA 02111 617-542-8656 / Fax: 617-482-9001 PO Box 91930 Albuquerque, NM 87199 (505) 338-0005 Crystalclean Plexus Plastic Cleaner V-R65-BA Use with V-Mount batteries Plexus 3700 Western Way, NE Millersburg, OR 97231 541-926-2900 / Fax: 541-967-8441 www.discoveryplastics.com 638 Lindero Canyon Rd. #371 Agoura, CA 91301 800-405-6495 Fax: 818-879-0697 Scotch-Brite High Performance Cloth NOVUS #1 Plastic Clean and Shine 3M Stationery & Office Supplies Div. 3M Center NOVUS, Inc. The Simco Industrial Static Control Exair Corporation 12800 Highway 13 South, Suite 500 Savage, MN 55378 800-548-6872 ext.451 Fax: 952-946-0435 St. Paul, MN 55144-1000 877-362-5684 Fax: 651-733-0382 www.mmm.com An Illinois Tool Works Co. 2257 North Penn Road Hatfield, PA 19440-1998 800-203-3419 215-822-2171 Fax: 215-822-3795 www.simco.biz 8 3 20/20 Plastic-Cleaner Sumner Laboratories Discovery Plastics Features 2 Recommended Anti-Static Cleaners and Polishes 1250 Century Circle North Cincinnati, OH 45246-3309 513-671-3322 Fax : 513-671-3363 www.exair.com Operational Setup 1. Unpack the V-R1042DP-TE4U and accompanying power supply. Physically inspect for any damage that may have occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at 800-800-6608. If you are not located within the continental united states call +1 310-333-0606. 2. The V-R1042DP-TE4U can be mounted in an standard EIA 19-inch rack. The rack ears on the V-R1042DP-TE4U can alternately be used as a table-top stand. 3. Connect required cables for signal input and output. Please note that power must be applied to the V-R1042DP-TE4U for the video output to be activated. All BNC connectors should be rated for 75Ω. 4. Plug the V-PS12-5V-1 power supply into an A.C. source. Attach the 2-pin twist-lock power connector to the back of the monitor. Please note that DC power can be supplied directly to the monitor from a variety of sources, such as a battery adapter or vehicle power. In operation, the V-R1042DP-TE4U will draw approximately 3 Amps. Attach 2-pin twist-lock power connector from VPS12-5V-1 power supply to the back of the unit. 5. Turn on the V-R1042DP-TE4U by pressing the power switch located on the front of the unit. 9 Switches and Adjustments See Section 10 Input Connectors Tally Pinout (HD-15) Power Adapter Cable V-PAC-XLR 12VDC Power Input Use with 4 Pin XLR connections HDSDI Inputs/Outputs (Active output requires monitor to be powered) * Tally lamps active when connected to ground 2 V-R1042DP-TE4U User’s Guide Marshall Electronics Pin No. Signal 1 Red (Monitor 1) 2 Green (Monitor 1) 3 N/C 4 Ground 5 Ground 6 N/C 7 N/C 8 N/C 9 N/C 10 N/C 11 Red (Monitor 2) 12 Green (Monitor (2) 13 N/C 14 Ground 15 Ground 5 Optional Accessories (continued) Battery Adapter V-DV-PWR1 Uses 2 Sony DVCam/HDV FP-Type batteries. When used with monitor power supply, can charge batteries plus operate monitor Sequential 2 channel charger IDX-VL-2Plus 2-channel sequential charger with a built-in 60W power supply. Charges 2 ENDURA E series batteries in fewer than 5 hours. One 10’ XLR cable included. Weighs only 2 lbs Sequential 4 channel charger IDX-VL-4 Economically charges 4 ENDURA E series batteries in under 6 hours using Full Power Charge (FPC) method Simultaneous 4 channel charger IDX-VL-4S Charges 4 ENDURA E series batteries in 2.5 hours or less 55 W Lithium Battery IDX-E7S V-Mount battery pack with 3 LED power Indicator 55 W Lithium Battery with Power Link IDX-E7 V-Mount Battery Pack with PowerLink includes accurate Power Status Display and supports Digi-View 82 W Lithium Battery IDX-E10S V-Mount battery pack with 3 LED power Indicator 82 W Lithium Battery with Power Link IDX-E10 V-Mount Battery Pack with PowerLink includes accurate Power Status Display and supports Digi-View Analog to Digital Converter BC-0909-AD Converts composite, Y/C, or YPbPr signals to HDSDI Cleaning Wipes V-HWP-K Package of 10 non-toxic, antistatic, alcohol and ammonia free cleaning wipes. Marshall Electronics 3 5 Electrical Specifications Display (Viewing Area) Screen Aspect Resolution (RGB Dots) Viewing Angles Contrast Ratio Dot Pitch Pixel Response Brightness Backlight Screen Treatments Protective Screen Estimated MTBF Inputs Active Outputs Tally Color temperature Color Gamut Luma Linearity Power Required Power Consumption Operating Temperature Storage Temperature Compliance RoHS WEEE/Environmental V-PS12-5V-1 Power Supply 10.4 Inch diagonal (211.2mm W x 158.4mm H) Native 4:3, Switchable to 16:9 1024HxRGx768V (2.4 Million Pixels) 170°H x 170°V 400:1 0.206mm square pixel 13ms rise /12ms fall 400 cd/m² Field Replaceable CCFL (50,000 hour half life) Anti Reflection, Anti Glare, Hard Coat 0.118” (3mm) thick Optical Grade Polycarbonate with Anti-Glare and Anti-Abrasion coatings. (600 Cheesecloth mil-M-13508C) 5 years of 24/7 operation 1 SDI/HDSDI input per screen; SMPTE 259M-C, 292M / ITU-R BT.601; female BNC; 1080i/60,59.95,50; 1080psF/24,23.98; 1035i/60,59.94; 720p/60,59.94,50,30,29.97,25 1 SDI/HDSDI output per screen; SMPTE 259M-C, 292M / ITU-R BT.601; female BNC 2 LEDs (Green, Red) per monitor; female HD-15 connector D65 (6500° Kelvin) SMPTE-C/EBU Typical +/- 3% with 5 ire increments (0 to 10 ire) 10.4 to 16.8 VDC 36 watt nominal for V-R1042DP-TE 32°F to 120°F (0°C to 50°C) -4°F to 120°F (-20°C to 50°C) ₠, FCC-Class A, ANSI-63.4 (Certificates on file) Do not dispose. Return to Manufacturer or Authorized Recycle Facility 14-10 VDC (Universal Voltage 5.0Amps max - UL Class 2 supply included) 6 Mechanical Specification Dimensions (W x H x D) (Main body only) Approx. Weight V-R1042DP-TE4U V-PS12-5V-1 Power Supply 18.9” x 7.0” x 1.6” 4.13” x 2.50” x 1.25” 5.0 lbs 0.65 lbs 7 Faceplate Cleaning Faceplate Cleaning When cleaning the faceplate it is very important to use non-abrasive and ammonia free cleaning agents and a clean micro fiber cloth. Do not use paper towels. Paper towel fibers are coarse and may scratch the surface of the Polycarbonate faceplate. Paper towels may also leave streaks on the surface. Antistatic and fingerprint resistant cleaning agents are recommended. Wash protective cover with a solution of mild soap or detergent and lukewarm water. Use a clean soft cloth, applying only light pressure. Rinse with clean water and dry by blotting with a damp cloth or chamois. Grease, oil or tar may be removed with a good grade of hexane, aliphatic naphtha, or kerosene. These solvents may be obtained at a paint or hardware store and should be used in accordance with manufacturer’s recommendations. DO NOT USE: window cleaning sprays, kitchen scouring compounds or solvents such as acetone, gasoline, benzene, alcohol, carbon tetrachloride, or lacquer thinner. These can scratch the sheet’s surface and/or weaken the sheet causing small surface cracks called “crazing.” Faceplate Dusting Dust with a soft, damp cloth or chamois. Dry or gritty cloths may cause surface scratches and create a static electric charge on the surface. Neutralizing static electricity effects by using recommended cleaning and polishing practice. Faceplate Polishing Protect and maintain surface gloss by occasional polishing with a good plastic cleaner and polish. Apply a thin, even coat with a soft clean cloth and polish lightly with cotton flannel. Then wipe with a damp cloth to help eliminate electrostatic charges that can attract dust particles. Marking on the Faceplate Use SHARPEE or equivalent marker. Clean as per instructions with an ammonia free cleaning agent. 4 V-R1042DP-TE4U User’s Guide
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Modify Date : 2010:02:16 00:55:43-08:00 Create Date : 2008:06:26 10:52:28-07:00 Metadata Date : 2010:02:16 00:55:43-08:00 Creator Tool : Adobe InDesign CS2 (4.0.4) Format : application/pdf Title : V-R1042DP-TE4U_insidePage.indd Document ID : uuid:d816a4ee-4e8d-486d-9cc2-6f215d353d72 Instance ID : uuid:fc2ab07d-c58f-4304-85b1-df37b133e454 Producer : Adobe PDF Library 7.0 Page Count : 4 Creator : Adobe InDesign CS2 (4.0.4) GTS PDFX Conformance : PDF/X-3:2002 GTS PDFX Version : PDF/X-3:2002 Trapped : FalseEXIF Metadata provided by EXIF.tools