VX_Codelocks VX Codelocks
User Manual: VX_Codelocks
Open the PDF directly: View PDF 
.
Page Count: 7
85
STAND-ALONE DIGITAL CODE-LOCKS
Videx digital codelocks are manufactured from the highest quality materials, this guarantees high reliability and
oers a wide range of models at competitive price / performance. All versions oer ease of installation and a
user friendly “programming menu” this allows the user to store, by using a “discrete code”(up to 8 digits), one or
more “access codes” and relay opening time and operating mode (the number of codes and relays depend on the
code-lock model). The relays can be programmed to operate for a specied time or to be latched. Depending on
the codelock version, they can have 1 or 2 input terminals to enable the relevant relay.
Stand-alone code-locks are available in a number of version: ush or surface mounting for “8000 Series” and
“4000 Series” modular systems (to combine with audio and video door entry systems) and in plastic version for
internal use.
The dierent versions start from 1 relay with 1 access code to 3 relays with 3000 access codes. The relays are dry
contact with C, NC and NO terminals (except the third relay in 3 relay version where only C and NO terminals are
available).
All codelocks have protection that temporary disables the keypad each time a wrong code is entered: the disable
time will increase each time two or more wrong codes are entered.
If higher security is required, VIDEX oer codelocks that use serial communication between the key pad and the
remote “control unit” which houses the relay outputs.
Access control
86
DIGITAL CODE-LOCKS UNIT COMPLETE WITH MOUNTING BOX
These are self-contained digital codelocks that require no additional accessories for there installation. These units
are robust and very reliable. They are available for ush and surface mounting with front plates in stainless steel
(add /S to the product code) or aluminium (add /A to the product code).
All codelocks include 2 relay outputs with C/NC/NO contacts, 2 relay command inputs and an illumination panel.
Depending on the version of codelock, the number of access codes available range from a minimum of 2 to a
maximum of 100.
Working Voltage: 12/24Vac/dc.
Working Temperature: -10 +50°C.
Relay contacts: 24Vac/dc 3A
LOW COST CODELOCK UNITS
These low cost codelocks oer an eective solution employing the latest technology with high quality and low
cost. The installed codelocks do not require any additional parts or accessories as they are supplied complete,
with the surface or ush mounting box depending on the version.
The front plate is available in two dierent nishes: aluminium gold anodized (add “/G” to the product code when
ordering) or silver anodized (add “/A”).
All versions have 1 access code (add “/9” to the product code to order 9 code version) and are equipped with key-
pad illumination lamp, with a call button (marked by the symbol ) to operate an extension sounder Art.512A
and equipped with 1 relay with C/NC/NO terminals and 1 relay command input.
Working Voltage: 12/24Vac/dc.
Working Temperature: -10 +50°C.
Relay contacts: 24Vac/dc 3A
Art. DESCRIPTION
VX800NF Codelock unit, 2 code/2 relay outputs, ush mounting.
VX800NS Codelock unit, 2 code/2 relay output, surface mounting.
VX900NF As VX800F but with 100 codes.
VX900NS As VX800S but with 100 codes.
Art. DESCRIPTION
VX810N Codelock unit, 1 code, ush mounting.
VX810NS Codelock unit, 1 code, surface mounting.
Art. VX 800NF/A
Art. VX 900NF/A
Art. VX 800NS/A
Art. VX 900NS/A
Art. VX 810N/G Art. VX 810NS/A
Access control
87
LOW COST CODELOCK UNITS FOR INTERNAL USE
This range of codelocks provide an ideal solution where Access Control systems are for internal use (oces, labo-
ratories etc.). The management circuitry is housed within the ABS codelock box and the keypad is of the tactile
membrane type. The units are available for ush (requires a standard 503 back box not provided) or surface
mounting. The colours available are dark grey for the surface version. With dark grey or white for the ush ver-
sion. Flush versions can be ordered un-assembled to be painted (by the customer).
All versions are equipped with a relay having C/NC/NO terminals and two relay command inputs. Both relay
command inputs operate the same relay, the rst activates the relay as programmed (latching or timed) while the
second alternates the relay state (latch).
Working Voltage: 12Vac/dc
Working Temperature: -10 +50°C
Relay contacts: 24Vac/dc 3A
TWO ZONE LOW COST SELF CONTAINED ALARM SYSTEM
The two zone alarm is contained in the same size box as the low cost codelock units. With new rmware, the two
zone alarm provides a basic low cost alarm oering ease of installation. The units are available for ush (requires
a standard 503 back box not provided) or surface mounting.
Available colours are dark grey for surface versions and dark grey or white for ush versions. Flush version can
be ordered un-assembled to allow painting for colour co-ordination (by the customer). The unit contains 1 relay
with C/NC/NO contacts, 1 tamper switch and 1 “instant zone alarm input”, 1 “delayed zone alarm input” (Timed
entry and exit), 1 x 8 Ohms siren output. The unit employs a user friendly “Programming Menu” which allows the
programming of up to 30 user dened access codes, duration of siren and relay activation from 1 to 99 minutes
and timed exit/entry from 1 to 99 seconds. The alarm is ideal for use in stand alone applications ie, apartments,
garages, sheds, stock rooms or as a caravan alarm system etc.
Working Voltage: 12Vac/dc
Working Temperature: -10 +50°C
Relay contacts: 24Vac/dc 3A
Art. DESCRIPTION
VX812 Codelock unit, 9 codes, 1 relay, surface mounting colour dark gray.
VX814/W* Codelock unit, 9 codes, 1 relay, ush mounting, colour white.
VX814/G* Codelock unit, 9 codes, 1 relay, surface mounting, colour dark ray.
Art. DESCRIPTION
VX813 Two zone alarm system, 30 codes,1 relay, surface mounting colour dark grey.
VX815/W* Two zone alarm system, 30 codes,1 relay, ush mounting colour white.
VX815/G* Two zone alarm system, 30 codes,1 relay, ush mounting colour dark grey.
Art. VX812
Art. VX813
Art. VX814/G
Art. VX815/G
*Painting of dierent colours shall be made by the customer: in this case order the unassembled version of the article. For the installation is required a standard 503 ush mounting
box (not provided).
Access control
88
CODE-LOCKS MODULES FOR 8000 SERIES MODULAR SYSTEM
These units have been designed to compliment the “Series 8000” audio and video modules. The units are avail-
able in 2 or 3 relay versions, with 2 or 100 code options and with optional keypad illumination lamp. All versions
have 2 command relay inputs. Front plates are available in stainless steel (sux the product code with /S) or
aluminium (sux the product code with /A).
Working Voltage: 12/24Vac/dc 1 VA.
Working Temperature: -10 +50°C
Relay contacts: 24Vac/dc 3A
CODELOCKS MODULES FOR 4000 SERIES MODULAR SYSTEM
These units have been designed to compliment the “Series 4000” audio and video modules.
Are available in 4 dierent models: 3 for the standard line and 1 for the vandal resistant line. The modules for
the standard line have the same look but can be identied by the number of built-in relays and managed access
codes.
The Art.4801, having a serial RS-485 interface, oers the facility to be connected to the remote control units Art.
VX1050 and Art.VX1052. Finishes as provided for 4000 Series modular system.
Working Voltage: 12/24Vac/dc 1 VA.
Working Temperature: -10 +50°C
Relay contacts: 24Vac/dc 3A
Art. DESCRIPTION
8800 Codelock module, 2 code/2 relay output.
8900 Codelock module, 100 code/2 relay out put.
Art. DESCRIPTION
4800 Codelock module 3 codes / 3 relays
4801 Codelock module up to 3.000 codes / 2 relays (RS-485 facility)
4900 Codelock module 100 codes / 3 relays
VR4KCLM As Art.4800 but vandal resistant line
105
120
Art.8800
Art.8900
Art.4800/A
Art.4801/A
Art.4900/A
Art.VR4KCLM
Access control
89
ACCESS CONTROL SYSTEMS USING SERIAL CODELOCKS
Serial codelocks oer a higher level of security against tampering than “stand-alone” codelocks.
The keypad is the input peripheral for the data which is processed by the remote sited control unit (normally
installed in a secure area), to which the keypad is connected through a serial connection.
Greater security against tampering is achieved as the lock relays are housed within the remote sited control
equipment.
The serial codelock units are powered from the control unit which houses the relays and stored access codes.
SERIAL CODELOCKS “SLIM SERIES”
The “Slim Series” codelocks are designed to be installed where space is limited.
The body of the codelock is manufactured from one piece die cast aluminium, which greatly improves the code-
locks resilience to vandalism and misuse, giving increased reliability.
All models are for surface mounting and are available in either a square or rounded shape, with two dierent
nishes: nickel (order adding “/N” to the product code) or gold (order adding “/G”).
These codelock units must be connected to one of the following Videx Central Control Units: VX1000B, VX1010-1
or VX1010-2, depending on how many user codes or relay outputs are required.
Working temperature: -10 +50°C.
Art. DESCRIPTION
VX1020/N square shape, nickel colour
VX1020/G square shape, gold colour
VX1021/N rounded shape, nickel colour
VX1021/G rounded shape, gold colour
Art. VX 1021/G Art. VX 1020/N
Access control
90
LOW COST SERIAL CODELOCKS
Having the same appearance as the “stand-alone” version, these are available for ush or surface mounting, with
the front panels available in two dierent nishes: aluminium gold anodized (add “/G” to the product code when
ordering) or aluminium silver anodized (add “/A” to the product code).Working temperature -10 +50°C.
SERIAL CODELOCK MODULES FOR 4000 SERIES MODULAR SYSTEM
These units have been designed to compliment the “Series 4000” audio and video modules. The Art.4801 can op-
erate in stand-alone mode but having a serial RS- 485 interface, oers the facility to be connected to the remote
control units Art.VX1050 and Art.VX1052. Finishes as provided for 4000 Series modular system
Working Voltage: 12/24Vac/dc 1 VA.
Working temperature: -10 +50°C.
Relay contacts: 24Vac/dc 3A
Art. DESCRIPTION
VX1011 Keypad module with serial connection compatible with the following Videx Control Units: VX1000,
VX1000B, VX1010-1 or VX1010-2.
VX1011S As above but surface mounting.
Art. DESCRIPTION
4801 Codelock module up to 3000 codes / 2 relays (RS-485 facility)
105
120
Art. VX 1011/G Art. VX 1011S/A
Art. 4801
Access control
91
CONTROL UNITS FOR SERIAL CODELOCKS
All serial codelock units require a remote VIDEX control unit.
Control Units are identied by memory capacity (number of access codes that can be stored), the number of
relay outputs (with C/NC/NO contacts) and the operating mode. The control unit is programmed via the keypad
to which it is connected. The programming allows for the storage of access codes and the setting of the relay
operating times.
Access to the programming menu is password (PIN) code protected (maximum 8 digits) and can be customized
by the end user.
Serial connection between units uses 3 standard wires with a maximum distance of 600mts.
ACCESS CONTROL SYSTEMS USING PROXIMITY KEY READERS
“VproX” control units are available in ve dierent sizes, allowing greater exibility in the design and implemen-
tation of access control systems. A system will include a control unit, one or more key reader, power supply and
as many proximity keys as required. VproX” access control systems can be used from 1 door 20 user installation
up to 20 main doors and 99 apartment doors with 4000 users.
Art. CONTROL UNIT FEATURES
VX1010-1 Control Unit with door open/additional service function, with 1 access code, 1 relay output with the
option to control up to 2 serial keypads in parallel using keypad types: VX1001, VX1011, VX1020
and VX1021.
Housed in a standard 5 module A type DIN box (87.50mm).
Working Voltage: 12/24Vac/dc 2VA max.
Working temperature: -10 +50°C.
VX1010-2 Control Unit with door open/additional service function, with 9 access codes and 2 relay outputs.
The unit will control up to 2 serial keypads in parallel, using keypad types: VX1001, VX1011, VX1020
and VX1021.
Housed in a standard 5 module A type DIN box (87.50mm).
Working Voltage: 12/24Vac/dc 2VA max.
Working temperature: -10 +50°C.
Art. PROXIMITY KEYS
All proximity keys use a 32 bit code (with over 4 billion combinations) and are available in two dier-
ent formats: card and tags.
VX955/C Proximity key built into a PVC card, badge size (ISO standard 85,6x54x0,76). Colour: gloss white, com-
patible for silk screen printing. 32 bit code and a reading distance up to 50mm (using Videx readers).
VX955/T Proximity key built into a plastic key-holder (fob), diameter 36mm and thickness 5mm. Colour: grey,
with Videx logo. 32 bit code and reading distance up to 20mm (using Videx readers).
Art.VX 1010-2
Art.VX955/C Art.VX955/T
Access control
