VisionSDK_UserGuide_2D_SurroundView_Demo Vision SDK User Guide 2D Surround View Demo

User Manual:

Open the PDF directly: View PDF .
Page Count: 27

• Vision SDK
• SurroundView Demo Set Up Guide
• TABLE OF CONTENTS
• 1 Introduction
  • 1.1 Purpose & Scope
  • 1.2 Overview
    • 1.2.1 TDA3xx Platform
• 2 Demo Set up
  • 2.1 Cameras to be used in TDA2xx platform
  • 2.2 Cameras to be used in TDA3xx platform
  • 2.3 Mounting of cameras
  • 2.4 Sample Non-calibrated output
  • 2.5 A Brand-new Calibration
    • 2.5.1 Obtaining Surround View Images for the given set up
    • 2.5.2 Contact TI FAE / Support
    • 2.5.3 Using new calibration tables
  • 2.6 Re-Calibrating Existing Demo Set-up
• 3 Calibration Tool
  • 3.1 Purpose for using this tool
  • 3.2 Prerequisites
  • 3.3 Input files required by the tool
    • 3.3.1 Obtain four surround view calibration frames
    • 3.3.2 Obtain bird-eye reference image
  • 3.4 Tool Instruction
• 4 Fish-eye distortion center tool
  • 4.1 Purpose for using this tool
  • 4.2 Prerequisites
  • 4.3 Input files required by the tool
  • 4.4 Tool Instruction
• 5 Update Vision SDK with New Initial Perspective Matrix and Fish-eye Distortion Centers
• 6 Revision History