Vortexer Manual
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
Vortex Mixer 24 This page left blank intentionally. Data herein has been verified and validated. It is believed adequate for the intended use of the instrument. If the instrument or procedures are used for purposes over and above the capabilities specified herein, confirmation of the validity and suitability should be obtained; otherwise Omni International does not guarantee results and assumes no obligation or liability. This publication is not a license to operate under, or a recommendation to infringe upon, any process patents. This product is warranted to be free from defects in material and workmanship for a period of ONE YEAR from the date of delivery. Omni International will repair or replace and return free of charge any part which is returned to its factory within said period, transportation prepaid by user, and which is found upon inspection to have been defective in materials or workmanship. This warranty does not include normal wear from use; it does not apply to any instrument or parts which have been altered by anyone other than an employee of Omni International nor to any instrument which has been damaged through accident, negligence, failure to follow operating instructions, the use of electric currents or circuits other than those specified on the plate affixed to the instrument, misuse, or abuse. Omni International reserves the right to change, alter, modify, or improve any of its instruments without any obligation whatever to make corresponding changes to any instrument previously sold or shipped. THE FORGOING OBLIGATION IS IN LIEU OF ALL OBLIGATIONS AND LIABILITIES INCLUDING NEGLIGENCE AND ALL WARRANTIES OF MERCHANTABILITY OR OTHERWISE, EXPRESSED OR IMPLIED IN FACT OR BY LAW, AND STATE OUR ENTIRE AND EXCLUSIVE LIABILITY AND BUYERS EXCLUSIVE REMEDY FOR ANY CLAIM OF DAMAGES IN CONNECTION WITH THE SALE OR FURNISHING OF GOODS OR PARTS, THEIR DESIGN, SUITABILITY FOR USE, INSTALLATION, OR OPERATION. OMNI INTERNATIONAL WILL IN NO EVENT BE LIABLE FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES WHATSOEVER, AND THEIR LIABILITY UNDER NO CIRCUMSTANCES WILL EXCEED THE CONTRACT PRICE FOR THE GOODS FOR WHICH LIABILITY IS CLAIMED. This product has been engineered for safety; however, basic safety precautions and common sense must always be demonstrated when using any electrical product. - DO NOT attempt to modify any part of this product. - DO NOT allow the machine to be submerged in any liquid. - DO NOT use in any setting other than an indoor laboratory. - DO NOT plug power cord into an incorrect outlet or subject it to an incorrect voltage. - Use this product only for its intended purpose. - DO NOT use attachments not recommended by the manufacturer. - DO NOT operate the product if it is damaged in any way. - Keep this product away from heated surfaces. - DO NOT modify the plug or cord that is provided. If the plug will not fit the outlet, have the proper outlet installed by a qualified electrician. - DO NOT operate the product with the safety ground disconnected. WARNING: Reduce the risk of unintentional starting; make sure the speed switch is in the OFF position before plugging in the motor. WARNING: Damaged or worn power cords should be repaired or replaced immediately by a qualified electrician. WARNING: Improper connection of the equipment can result in a risk of electric shock. Overview 1. 4. 2. 5. 3. 6. 1. Hub 2. Power/Mode Switch 3. Speed Control Knob 4. Mixing Cup 5. Rubber Cover for 3” Mixing Platform 6. 3” Mixing Platform The Vortex Mixer 24 consists of the following: Description Quantity Vortex Mixer 24 Assembly 1 Mixing Cup 1 3 Inch Mixing Platform 1 Rubber Cover for 3 Inch Platform 1 User Manual 1 General Operation On Off Touch Power/Mode Switch The Power/Mode Switch controls the Power and the operating mode of the Vortex Mixer 24. Speed Control Knob Turn the Speed Control knob to the desired speed setting before starting. Most applications require a speed setting between 3 and 10 for mixing. Accessories 3 Inch Mixing Platform Align the flat portion of the Vortex Mixer 24’s hub to the flat portion of the 3 inch mixing platform’s receptacle. Press down until the attachment snaps into place. Mixing Cup Align the flat portion of the Vortex Mixer 24’s hub to the flat portion of the Mixing Cup’s receptacle. Press down until the attachment snaps into place. CAUTION: Turn the Power/Mode switch to the Off position before changing accessories. CAUTION: Do Not lift the Vortex Mixer 24 by its attachment. All attachments are removable. Operation Touch Mode • Place the toggle switch in the TOUCH position and set the speed control to the desired setting. • Press your processing vessel/s on the 3 Inch Platform or the Mixing Cup to begin mixing. • Release the pressure to stop mixing. Hands Free Mode • Place the toggle switch ON position and set the speed control to the desired setting. The Vortex Mixer will run until turned to the off position. 15 mLL 14 mLL 15 mLL 15 mLL 13 mLL 14 mLL 14 mLL 12 mLL 13 mLL 13 mLL 11 mLL 12 mLL 12 mLL 10 mLL 11 mLL 11 mLL 9 mL 10 mLL 10 mLL 8 mL 9 mL 9 mL 6 mL 8 mL 8 mL 5 mL 6 mL 6 mL 4 mL 5 mL 5 mL 3 mL 4 mL 4 mL 2m L 3 mL 3 mL 1 mL 2m L 2m L 1 mL 1 mL CAUTION: Unplug the Vortex Mixer 24 from it’s power source before cleaning. Do not submerge the unit in liquid. This page left blank intentionally. 935C Cobb Place Blvd. Kennesaw, GA 30144 800.776.4431 • 770.421.0058 www.omni-inc.com PN: 03-269 Rev. A
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c137 79.159768, 2016/08/11-13:24:42 Create Date : 2017:06:19 14:22:38-04:00 Metadata Date : 2017:06:19 14:22:41-04:00 Modify Date : 2017:06:19 14:22:41-04:00 Creator Tool : Adobe InDesign CC 2017 (Windows) Instance ID : uuid:d7292d34-0fa8-4bf3-84bb-f6f22648e516 Original Document ID : xmp.did:64410359-612f-4c9f-a9b8-1f7885b3a9b6 Document ID : xmp.id:3cd758bc-b644-054d-ab44-02b9d2f8e457 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:76f1446d-e122-2e42-bb82-b3fc52b58978 Derived From Document ID : xmp.did:bca29017-f7f0-48e6-ae51-ca3fab206ed4 Derived From Original Document ID: xmp.did:64410359-612f-4c9f-a9b8-1f7885b3a9b6 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Windows) History Changed : / History When : 2017:06:19 14:22:38-04:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 8 Creator : Adobe InDesign CC 2017 (Windows)EXIF Metadata provided by EXIF.tools