Vprox
Vprox Access Control Vprox Access Control
User Manual: Vprox
Open the PDF directly: View PDF 
.
Page Count: 7
91
CONTROL UNITS FOR SERIAL CODELOCKS
All serial codelock units require a remote VIDEX control unit.
Control Units are identied by memory capacity (number of access codes that can be stored), the number of
relay outputs (with C/NC/NO contacts) and the operating mode. The control unit is programmed via the keypad
to which it is connected. The programming allows for the storage of access codes and the setting of the relay
operating times.
Access to the programming menu is password (PIN) code protected (maximum 8 digits) and can be customized
by the end user.
Serial connection between units uses 3 standard wires with a maximum distance of 600mts.
ACCESS CONTROL SYSTEMS USING PROXIMITY KEY READERS
“VproX” control units are available in ve dierent sizes, allowing greater exibility in the design and implemen-
tation of access control systems. A system will include a control unit, one or more key reader, power supply and
as many proximity keys as required. VproX” access control systems can be used from 1 door 20 user installation
up to 20 main doors and 99 apartment doors with 4000 users.
Art. CONTROL UNIT FEATURES
VX1010-1 Control Unit with door open/additional service function, with 1 access code, 1 relay output with the
option to control up to 2 serial keypads in parallel using keypad types: VX1001, VX1011, VX1020
and VX1021.
Housed in a standard 5 module A type DIN box (87.50mm).
Working Voltage: 12/24Vac/dc 2VA max.
Working temperature: -10 +50°C.
VX1010-2 Control Unit with door open/additional service function, with 9 access codes and 2 relay outputs.
The unit will control up to 2 serial keypads in parallel, using keypad types: VX1001, VX1011, VX1020
and VX1021.
Housed in a standard 5 module A type DIN box (87.50mm).
Working Voltage: 12/24Vac/dc 2VA max.
Working temperature: -10 +50°C.
Art. PROXIMITY KEYS
All proximity keys use a 32 bit code (with over 4 billion combinations) and are available in two dier-
ent formats: card and tags.
VX955/C Proximity key built into a PVC card, badge size (ISO standard 85,6x54x0,76). Colour: gloss white, com-
patible for silk screen printing. 32 bit code and a reading distance up to 50mm (using Videx readers).
VX955/T Proximity key built into a plastic key-holder (fob), diameter 36mm and thickness 5mm. Colour: grey,
with Videx logo. 32 bit code and reading distance up to 20mm (using Videx readers).
Art.VX 1010-2
Art.VX955/C Art.VX955/T
Access control
92
PROXIMITY KEY READER UNITS
VIDEX produce a wide range of proximity key readers to meet all installation and market requirements. The range
includes: surface mounting readers in plastic or metal housings, ush mounting readers, reader modules for
“8000 Series” and “4000 Series” modular systems and reader modules for installation on third party products.
Art. DESCRIPTION
849Z Proximity key reader for VIDEX 32bit coded keys.
The circuitry is housed in a die-cast aluminium alloy enclosure (compact and robust) with a polycarbonate
window for the key reading area. The maximum reading distance is between 20 to 50mm depending on
the key type used. The unit gives visual (tri coloured LED in reader window) and audible signals (internal
buzzer) of operation. Connection from the reader to the “VproX” control unit requires a 5 wire cable for a
maximum distance of 200 meters.
The Art.849Z is available in two dierent nishes: pearl nickel (to order add “/N” to the product code) or
dark grey (to order add “/G”) The key reader is supplied from the control unit and is provided with a hid-
den xing plate for surface mounting and a 3mts 5 core cable.
Working temperature: -10 +50°C
Art. SURFACE MOUNTING READERS
849P The 849P is housed in an impact resistant ABS plastic housing and has the same features as the 849Z. The
units are available in two colours: white (to order add “/W” to the product code) or dark grey (add “/G”
to the product code).
Working temperature: -10 +50°C
Art.849Z/N
Art.849Z/G
Art.849P/G Art.849P/W
Access control
93
Art. FLUSH MOUNTING READERS
849F* Proximity key reader having the same features as Art.849 but using ush mounting support. The support
(made from impact resistant ABS plastic) is available in 2 dierent colours: white and dark grey (when or-
dering add sux /W for white or /G for dark grey). The installation requires a standard 503 ush mounting
box (not provided).
Working temperature: -10 +50°C
*Painting of dierent colours shall be made by the customer: in this case order the unassembled version of the article.
Art. PANEL MOUNTING UNIT
VP/PM Proximity key reader head for panel mounting (or other third party support mounting), with polycar-
bonate window (40x40mm), protection box (55x55mm) and 35cm connection cable. Same features and
operation of other models.
4 xing holes as shown in the drawing.
Working temperature -10 +50°C.
Art. READERS FOR “8000” SERIES MODULAR SYSTEMS
8849 Videx proximity reader built in to a “Series 8000” module. Having the same features as the above models.
This unit combines a polycarbonate reader window with stainless steel or aluminium frame (when order-
ing add a sux “/S” for stainless steel or “/A” for aluminium).
Working temperature -10 +50°C.
Art.849F
Art.VP/PM
Art. 8849
Access control
94
STAND ALONE READERS FOR 4000 SERIES MODULAR SYSTEM
The 4000 Series is continuously undergoing enhancements and improvement to current modules and intro-
ducing new modules to compliment the range. Two new stand-alone proximity key reader modules have been
added to the range.
The appearance of these new modules is the same as the Art.4849 but include a dry contact changeover relay.
The readers are available in two versions 100 and 1000 user. The 1000 user (Art.4850/P) has an RS-232 and RS-485
serial interface included and can be used standalone (Self contained) or as part of a network. Programming of
both units is carried out using the 4 buttons on the rear of the modules or additionally through a PC or the net-
work for the Art.4850/P. Finishes as provided for 4000 Series modular system.
Working Voltage: 12/24Vac/dc 1 VA.
Working temperature: -10 +50°C.
Relay contacts: 24Vac/dc 3A
Art. READERS FOR “4000” SERIES MODULAR SYSTEM
4850 Stand-alone proximity reader module with 1 relay, 100 users
4850/P Stand-alone Proximity reader module with 1 relay, 1000 users RS-
232 for programming, RS-485 serial interfaces which allows connection
to remote control units Art.VX1050 and Art.VX1052.
Art. READERS FOR “4000” SERIES MODULAR SYSTEM
4849 Videx proximity reader built in to a “Series 4000” module. Having the same features as the above
models. This unit combines a polycarbonate reader window. Finishes as provided for 4000 Series
modular system.
Working temperature -10 +50°C.
VR4KVPM As Art.4849 but vandal resistant line
VIDEX
VproX
105
120
Art. 4849/A
Art. 4850/A
Art. 4850/P/A
Access control
95
CONTROL UNITS FOR PROXIMITY KEY READERS
Videx proximity readers are managed by one of the “VproX” control units. The range oers various models from
a basic unit that controls a single access point, to the more sophisticated, that have multi-access control and
advanced features of programming/management of “events and reports”. All devices operate autonomously,
so they do not need a xed connection with a PersonalComputer. Various system functions and programming
features are accessible by using the switches and keyboards of the control units, while the most advanced system
(VproX-1000 and 4000) can be controlled “on line” by a PC using special Videx software “VP4000”. All control units
in the range include an internal key reader and the option to have up to 2 external reader units (in parallel) on
each door. Relay outputs have NC/NO contacts, 5Amps–24Vac/dc max.
Connection to the “VproX” reader unit requires a minimum of 5 core cable (for serial communication) with a
maximum distance of 200mts.
Art. CONTROL UNIT CONTROL FEATURES
VproX-20 Control unit for 1 door and 20 proximity keys. Programming, deleting and testing of a single key
and 4 door opening time settings (from 2 to 10secs).
Available in a plastic box, standard 5 module A type DIN box (87.50mm).
Power required: 12Vac/dc 2VA max.
VproX-100 Control unit for 2 doors and 100 proximity keys. 2 digits display and 4 function pushbuttons to gain
access (by means of a “master code”) for the programming, deleting and testing of a single key and
to set the door opening time (from 1 to 99secs).
Available in a plastic box, standard 9 module A type DIN box (157.50mm).
Power required: 12Vac/dc 2VA max.
VproX-250 Control unit for 3 doors and 250 proximity keys. 4 digit display and 4x3 keypad to gain access (by
means of a “master code”) for the programming, deleting and testing of a single key, to set the door
opening time (from 1 to 99secs) and the “time band” access (keys working time). Alarm relay with
timed activation after 5 attempts of entering with a “not allowed” key. Real time /clock on board
(with backup battery) and parallel port for an “on line” printer to report each entry. 2 removable
“Socket Memory Eeprom” for the “main memory” and “back up memory” where all system data is
contained. Power required: 12Vdc 4VA max.
Art. VproX-20 Art.VproX-100
Art. VproX - 250
Access control
96
VproX-1000 Control unit for 4 main doors (Expanding up to 20), and up to 99 apartment doors (by adding the
VproX-1000A unit for each door that requires to be controlled) and 1000 proximity keys. 2 x 16
chars LCD display and 4 x 4 keypad to gain access (by use of a “master code”) for the programming,
deleting and testing of a single key, to set the door opening times (from 1 to 255secs) and the 4
“time bands” (keys working time). Internal memory for the “event report” (up to 512), and a serial
RS232 port for connection to a P.C. with special Videx software. Alarm relay with timed activation
after 5 attempts of entering a “not allowed” key. Real time /clock on board (with backup battery)
and 2 removable “Socket Memory Eeprom” for the “main memory” and “back up memory” where all
system data is contained. Power required: 12Vdc 4VA max.
VproX-4000 Includes all the functions of VproX-1000, plus the followings additional features:
- Memory capability up to 4000 keys
- Internal memory for the ‘Event Report’ now stores up to 2048 events
- ‘Direct copy’ function to copy the ‘Main’ memory module onto ‘Backup’ memory module
- Control of ‘VproX-4000/DM’ door monitoring device, to monitor the door status from the PC.
- Fully compatible with the advanced PC software ‘VP4000’.
Art. VPROX SYSTEM EXPANSION DEVICES
VproX-1000A Remote control unit for “VproX” proximity reader compatible with “VproX-1000/4000” system. This
device allows for the further expansion to the 4 main doors included on the “VproX- 1000/4000”
unit up to 20 (by adding one unit for each door) or to control the secondary apartment doors up
to 100 (by adding one unit for each door). By using a minimum 3 core cable all the remote control
units are connected in parallel on a serial BUS to the “VproX-1000/4000” control unit. Available in a
plastic, standard 9 module A type DIN box (157.50mm) with 230Vac 20VA max power supply with
the facility to connect a 12V – 2A backup battery.
Art. VproX - 1000/4000
Art. VproX - 1000A
Access control
97
VproX-4000/DM Door monitoring unit compatible with the VproX-4000 system. This device enables the moni-
toring of doors for either being open or closed. Four doors can be monitored by each unit.
The information will be relayed to the VproX-4000 controller and from there on to the PC. The
PC can then monitor the length of time a door is open and if necessary activate an alarm. This
greatly improves the security level of the VproX-4000 system. It is possible to connect up to 5
door monitoring units in parallel (To control up to 20 doors max.) on the same serial BUS used
by VproX- 1000/A sub units (Three wire bus).
Available in a plastic, standard 5 module A type DIN box with 12Vdc 1VA max.
Art. MANAGEMENT SOFTWARE FOR VPROX CONTROL UNITS
VP4000 VproX-1000/4000 Win Software - Special program for the Windows environment to manage the
“VproX-1000” and the VproX- 4000 controller units via a PC. The program incorporates user friendly
menus with on line “help”. When a database is created it is possible to associate the “user name” to each
key stored in the memory and to have access to all conguration parameters. The software allows for
the deletion or addition of keys and operates many other useful functions. It is also possible to down-
load from the “VproX system the “event report” memory and to list its contents by name, key number or
chronological date. If the PC program remains connected “on line”, the screen will show the data of the
last 5 entries with the photo ID of last user.
The program is supplied on CD-ROM with a RS232 cable.
When used with the VproX-4000, the software has the following additional features:
- Door monitoring when using the VproX-4000/DM module.
- Make a note of a particular key so that you can be informed when it is next used.
- Assign credits to keys so that when all credits are used the key is disabled.
A dierent number of credits can be assigned to dierent doors.
- Program keys that will only operate once or that will expiry after a certain date.
- Reset the time and date on the VproX-4000 CPU to match the PC time and date
Art. VproX - 4000DM
VP4000-VproX-1000/4000 Win Software
Access control
