WSC 0205 Submittal Sheet AIRsense

User Manual: WSC-0205 Submittal-sheet AIRsense of /wp-content/uploads

Open the PDF directly: View PDF PDF.
Page Count: 3

The w
orld’s best-selling electric floor heating brand
The world’s best-selling electric floor heating brand
AIRSENSE | AERIAL SNOW MELTING SENSOR
use with RESIBOX-120 and COMMBOX-600
SUBMITTAL SHEET WSC-0205
WARMUP INC.
USA: us@warmup.com
Tel.: 1-888-927-6333
www.warmup.com
CANADA: ca@warmup.com
Tel.: 1-888-592-7687
www.warmup.ca
PRODUCT CODE
AIRsense
PRODUCT DESCRIPTION
The AIRsense is a stylish, smart and reliable Snow and Ice sensor. Installed outdoors it measures the
temperature and detects snow, sending the information via the controller to the heating system.
The AIRsense is connected to the Snow Melting Controller with a 30ft (10m), 24V 4 wires cable and
communicating with the controller, providing the temperature value and the snow detection based on
the adjustable parameters.
The plastic ‘igloo’ shape design helps to assure reliable Snow/Ice detection as it prevents from the snow
to accumulate around the sensing area. The 4 holes around the sensors were designed to hold the anti
nesting spikes, keeping birds away from the sensor.
The sensor cap helps to keep the sensing area clean from dust and dirt during summer time and when
the snow melting system is not used.
The measured temperature and the snow detection are visible on the backlit LCD display of the controller.
The system can work with up to 4 AIRsense - Snow Sensors chained one after the other and link the 4
output zones of snow melting to the AIRsense. A special sensor with pre-defined address is needed as an
additional sensor besides the AIRsense who is active as #1.
AIRsense2, AIRsense3 and AIRsense4 are the required sensors when 2, 3 or 4 sensors are needed.
Each snow sensors must have different MAC (Media Access Control) address in order to communicate with
the main board.
FEATURES
Electronic snow and ice sensor
Plastic cover for off-season protection
Plug & Play on RESIBOX-120 and COMMBOX-600 panels
Adjustable set points
Maintenance: Pre-Season test modes
The w
orld’s best-selling electric floor heating brand
WARMUP INC.
USA: us@warmup.com
Tel.: 1-888-927-6333
www.warmup.com
CANADA: ca@warmup.com
Tel.: 1-888-592-7687
www.warmup.ca
The world’s best-selling electric floor heating brand
AIRSENSE | AERIAL SNOW MELTING SENSOR
use with RESIBOX-120 and COMMBOX-600
SUBMITTAL SHEET WSC-0205
TECHNICAL SPECIFICATIONS
Enclosure Protection
Entries
Mounting
IP65, Outdoor Mounting
33ft (10m) Four wires cable:
• 2x18AWG supply wires
• 2x22AWG communication
wires optional: can be
lengthened up to 450 ft. with
extended wire
Outdoor mounting on metal
holder or vertical pole.
NPT ½’’ Thread.
Material
Supply
Communication
Operating temp.
Storage temp.
ASA WR9160
24VAC±20%,50-60Hz,4W
RS485
-40°F to 122°F (-40° C to 50°C)
–50°F to 158°F (–40°C to 70°C)
DIMENSIONS
The w
orld’s best-selling electric floor heating brand
WARMUP INC.
USA: us@warmup.com
Tel.: 1-888-927-6333
www.warmup.com
CANADA: ca@warmup.com
Tel.: 1-888-592-7687
www.warmup.ca
The world’s best-selling electric floor heating brand
AIRSENSE | AERIAL SNOW MELTING SENSOR
use with RESIBOX-120 and COMMBOX-600
SUBMITTAL SHEET WSC-0205
TECHNICAL SUPPORT
Warmup is available 24/7/365 at (888) 927-6333.
For quotes, layouts and specific technical information, contact us at:
Warmup USA
52 Federal Rd #1F, Danbury, CT 06810
(888) 927-6333
us@warmup.com
Warmup CANADA
374 Wellington St W, Toronto, ON M5V 1E3
(905) 990-2075
ca@warmup.com
RELATED PRODUCTS
RESIBOX-120 - see WSC-0928
COMMBOX-600 - see WSC-0927
GIT1 - see WSC-1204
WIRING DIAGRAM
The AIRsense The AIRsenseThe AIRsense The AIRsense

Navigation menu