WSC 1116 Submittal Sheet Relay25
User Manual: WSC-1116 Submittal-sheet Relay25 of /wp-content/uploads
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
The world’s best-selling electric floor heating brand ™ GENERAL PURPOSE RELAY-25 SUBMITTAL SHEET WSC-1116 PRODUCT CODE RELAY-25 PRODUCT DESCRIPTION The Relay-25 is a 25A-240V relay used to increase the load switching capacity of the Warmup thermostats (15A). Together a thermostat and relay can switch up to 800 sqft of heated floors. FEATURES • • • • • • • • • Compatible with NADCM, NADWM, NADWS, FOIL and WODH systems. UL Class B construction standard. AC-activated coil that handles 200 to 240 VAC at either 50 or 60 Hz. Miniature size with maximum switching capacity. Flame resistant materials (UL94V-0-qualifying) used for all insulation material. Screw terminals for line, loads and coils. Conforms to UL, CSA, TUV and meets IEC 950. RoHS Compliant. 240V coils APPLICATION • This Relay-25 fits in a standard single gang box. It is used in conjunction with the 4iE® Smart thermostat series as well as the Tempo thermostat, in order to expand the original 15 amp capacity. It is specifically designed for large applications beyond 800 sqft. • Built for quiet operation, the relay can be mounted in an adjacent closet or in a space above or below. It connects to the 4iE® Smart thermostat via a 240V coil on the relay. WARMUP INC. USA: us@warmup.com Tel.: 1-888-927-6333 www.warmup.com CANADA: ca@warmup.com Tel.: 1-888-592-7687 www.warmup.ca The world’s best-selling electric floor heating brand ™ The world’s best-selling electric floor heating brand ™ GENERAL PURPOSE RELAY-25 SUBMITTAL SHEET WSC-1116 LIMITATIONS • • • • For use with indoor floor heating systems only. Use the power relay in a dry environment free from excessive dust, SO2, H2S, or organic gas. Do not allow a voltage greater than the maximum allowable coil voltage to be applied continuously. Do not use the power relay outside of specified voltages and currents. INSTALLATION Although there are no specific limits on the installation site, it should be as dry and dust-free as possible. Using in an atmosphere of high humidity and corrosive gas may deteriorate its performance characteristic caused by condensation or corrosive products, resulting in failure or burn damage of the Relay. Screw Terminal Models WARMUP INC. USA: us@warmup.com Tel.: 1-888-927-6333 www.warmup.com CANADA: ca@warmup.com Tel.: 1-888-592-7687 www.warmup.ca The world’s best-selling electric floor heating brand ™ The world’s best-selling electric floor heating brand ™ GENERAL PURPOSE RELAY-25 SUBMITTAL SHEET WSC-1116 Heating Loads Connect to Relay-25 only, controlled by the 4iE® N.B. 240V SUPPLY WITHOUT GFCI PROTECTION L1-LOAD-L2 HEATING (MAX 3600W/ 15 Amps) L1-LINE L2-LINE All heating loads connect to Relay-25 only, controlled by 4iE 240V COIL SUPPLY Hot (240V) Hot (240V) 240V GFCI PROTECTED SUPPLY L1-LINE-L2 POWER SUPPLY 0 Hot (240V) 1 2 4 6 8 Hot (240V) L1-LOAD-L2 L2 L1-LINE 1 2 3 EXT FLOOR SENSOR (NO POLARITY) The world’s best-selling floor heating brand™ US Office: WARMUP INC, 52 Federal Road, Unit 1F, Danbury, CT 06810 W: www.warmup.com E: us@warmup.com T: (888) 927-6333 F: (888) 927-4721 Canadian Office: WARMUP INC W: www.warmup.ca E: ca@warmup.com T: (888) 592-7687 F: (905) 366-7324 Heater/s Max 25A TITTLE Wiring Diagram 4iE-04_Realy-25 DATE DRAWN REVISION 16.10.2017 GW A PDF FILE Warmup - WD - 4iE-04_Relay-25 - 2017-10-16.pdf Any electrical works undertaken should be completed by a suitable qualified competent electrician. Any interconnecting electrical components that form part of a hydronic system should be connected to a 3A power supply, with the whole system having a single point of isolation. Heating Loads Connect to Relay-25 and 4iE® The Warmup word and associated logos are trade marks. © Warmup Plc. 2010 - Regd. TM Nos. 1257757, 4409926, 5265707. E & OE. Registered in England No. 2955213. Relay-25: max load 25A Max load: 15A Total Max Load: 40A N.B. Heating loads connect to Relay-25 and 4iE: Relay-25 4iE Total 240V SUPPLY WITHOUT GFCI PROTECTION L1-LOAD-L2 HEATING (MAX 3600W/ 15 Amps) L1-LINE L2-LINE L1-LINE-L2 POWER SUPPLY 240V COIL SUPPLY Hot (240V) Hot (240V) 240V GFCI PROTECTED SUPPLY Hot (240V) 0 2 1 4 6 8 Heater/s Max 15A Hot (240V) L1-LOAD-L2 Max load 25A Max load 15A Max load 40A L2 L1-LINE 1 2 3 EXT FLOOR SENSOR (NO POLARITY) The world’s best-selling floor heating brand™ US Office: WARMUP INC, 52 Federal Road, Unit 1F, Danbury, CT 06810 W: www.warmup.com E: us@warmup.com T: (888) 927-6333 F: (888) 927-4721 Heater/s Max 25A Canadian Office: WARMUP INC W: www.warmup.ca E: ca@warmup.com T: (888) 592-7687 F: (905) 366-7324 TITTLE Wiring Diagram 4iE-04_Realy-25_25-40A DATE DRAWN REVISION 16.10.2017 GW A PDF FILE Warmup - WD - 4iE-04_Relay-25_25-40A - 2017-10-16.pdf Any electrical works undertaken should be completed by a suitable qualified competent electrician. Any interconnecting electrical components that form part of a hydronic system should be connected to a 3A power supply, with the whole system having a single point of isolation. The Warmup word and associated logos are trade marks. © Warmup Plc. 2010 - Regd. TM Nos. 1257757, 4409926, 5265707. E & OE. Registered in England No. 2955213. WARMUP INC. USA: us@warmup.com Tel.: 1-888-927-6333 www.warmup.com CANADA: ca@warmup.com Tel.: 1-888-592-7687 www.warmup.ca The world’s best-selling electric floor heating brand ™ The world’s best-selling electric floor heating brand ™ GENERAL PURPOSE RELAY-25 SUBMITTAL SHEET WSC-1116 TECHNICAL SUPPORT Warmup is available 24/7/365 at (888) 927-6333. For quotes, layouts and specific technical information, contact us at: Warmup USA (888) 927-6333 us@warmup.com Warmup CANADA (888) 592 7687 ca@warmup.com RELATED PRODUCTS • 4iE® Smart WiFi Thermostat - see WSC-0926 WARMUP INC. USA: us@warmup.com Tel.: 1-888-927-6333 www.warmup.com CANADA: ca@warmup.com Tel.: 1-888-592-7687 www.warmup.ca The world’s best-selling electric floor heating brand ™
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Create Date : 2017:11:17 09:22:01-05:00 Metadata Date : 2017:11:17 09:22:02-05:00 Modify Date : 2017:11:17 09:22:02-05:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:b5f0a0b3-c688-49bb-95c7-9a7fdedc825f Original Document ID : xmp.did:1E92074D4ACAE71197BF9BF61DE4BDD8 Document ID : xmp.id:B82F0FABA2CBE711948682EC1B9A66B1 Rendition Class : proof:pdf History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2017:11:17 09:22:01-05:00 Derived From Instance ID : xmp.iid:B72F0FABA2CBE711948682EC1B9A66B1 Derived From Document ID : xmp.did:1E92074D4ACAE71197BF9BF61DE4BDD8 Derived From Original Document ID: xmp.did:1E92074D4ACAE71197BF9BF61DE4BDD8 Derived From Rendition Class : default Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 4 Creator : Adobe InDesign CS6 (Windows)EXIF Metadata provided by EXIF.tools