WT310/WT310HC/WT330 Digital Power Meter User's Manual WT300 User
WT300_user_manual
WT300_user_manual
WT300_user_manual
User Manual:
Open the PDF directly: View PDF
Page Count: 141 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Conventions Used in This Manual
- Entering Values
- Contents
- Chapter 1 Features
- 1.1 Items That This Instrument Can Measure (Measurement functions)
- 1.2 Measurement Conditions
- 1.3 Holding Measured Values and Performing Single Measurements
- 1.4 Measuring Power
- 1.5 Integrated Power (Watt hour)
- 1.6 Harmonic Measurement (Option)
- 1.7 Storing Measured Data and Saving and Loading Setup Parameters
- 1.8 Communication Functions
- 1.9 Other Features
- Chapter 2 Measurement Conditions
- 2.1 Setting the Measurement Mode
- 2.2 Configuring the Wiring System Settings (WT330 only)
- 2.3 Setting the Measurement Range When Using Direct Input
- 2.4 Setting the Measurement Ranges When Using an External Current Sensor (Option)
- 2.5 Setting the Scaling Feature When Using a VT or CT
- 2.6 Configuring Measurement Range Skipping
- 2.7 Setting the Crest Factor
- 2.8 Setting the Measurement Period
- 2.9 Configuring the Input Filters
- 2.10 Setting the Data Update Interval
- 2.11 Setting Averaging
- Chapter 3 Holding Measured Values and Performing Single Measurements
- Chapter 4 Measuring Power
- 4.1 Displaying Voltages, Currents, and Active Powers
- 4.2 Displaying Apparent Powers, Reactive Powers, and Power Factors
- 4.3 Displaying Phase Angles and Frequencies
- 4.4 Displaying Peak Values
- 4.5 Displaying the Efficiency (WT330 only), Crest Factors, the Results of Computations Using Basic Arithmetic, and Average Active Powers
- 4.6 Setting the MAX Hold Feature
- 4.7 Setting the Number of Displayed Digits
- Chapter 5 Integration
- Chapter 6 Harmonic Measurement (Option)
- Chapter 7 Storing Measured Data and Saving and Loading Setup Parameters
- Chapter 8 Other Features
- Appendix
- Index