Wi CS 2100, PG 1600, 1600W Network Deployment Guide

User Manual: WiCS-2100, WiPG-1600, WiPG-1600W - Network Deployment Guide

Open the PDF directly: View PDF .
Page Count: 27

Download
Open PDF In Browser	View PDF

WiPG/WiCS Devices
Network Deployment User Guide

For more information
www.wePresentWiFi.com

Sales: sales@wePresentWiFi.com
Support: help@wePresentWiFi.com

Contents
1.

Introduction

User Guide

2.1

WiPG/WiCS Device Installation

3.1
3.2
3.3
3.4
3.5
3.6
3.7

3
4
5
6
7
7
8

For more information
www.wePresentWiFi.com

Stand-Alone Connection Mode
Network Connection Mode – Option A
Network Connection Mode – Option B
Network Connection Mode – Option C
Deployment Options for Guest Network Access
VLAN Based Network – Option D
Data Transport

Connecting to WiPG/WiCS Devices
4.1
4.2
4.3
4.4

Standby Screen Display

Connecting Computers
Detect wePresents
Target a single wePresent
MirrorOp Software Development

9
9
10
11
12

WiPG/WiCS Customization

5.1
5.2
5.3
5.4
5.5

14
14
15
17
18

Admin Panel
Firewall Settings
Port Table
Wi-Fi Protocol
Bandwidth Usage Scenario’s

WiPG/WiCS Device Security

6.1
6.2

20
20

GuideWiPG/WiCS Device Security
GuideWiPG/WiCS Secuirty Feature

Firmware Upgrades

7.1
7.2

22
22

Single Device (Web Interface)
Multiple Devices

Deployment Scenarios

8.1
8.2
8.3

23
24
25

Classroom with one wePresent
Classroom with multiple wePresents
Conference Room with one wePresent

Sales: sales@wePresentWiFi.com
Support: help@wePresentWiFi.com

Introduction

The wePresent WiPG/WiCS devices help users to bridge the technology gap,
allowing businesses and classes to enjoy the benefits of wireless presentation.
When connected to a display or projector, users can mirror their content without the
need for connecting cables. The WiPG/WiCS products can be used as stand-alone
devices, generating their own Wi-Fi signal or connected to a network through the
LAN Ethernet port.
Windows and macOS users can share their desktop by installing and running free software called
MirrorOp (Sender). The MirrorOp software is available from the wePresent website and WiPG/
WiCS admin panel. Android and iOS users can share their content by installing the free MirrorOp
(Presenter) application available from Google Play and the App Store.



Basic WiPG/WiCS deployment example

Internet

Company/School LAN
WAP Internal

WiPG/WiCS

WAP Guest

The wePresent WiPG/WiCS devices are
designed for commercial implementation in
corporate, education, government, healthcare
and public environments. This documentation
provides deployment information for three
current wePresent models (WiPG-1000, WiPG1600w and WiCS-2100 & WiPG-2000).

WiPG/WiCS
is hard -wired
to internal
network

LAN
HDMI

Display
VGA

4 DIGIT CODE

Internal User

Guest

For more information, please visit our website
http://wepresentwifi.com or email our help team
at help@wepresentwifi.com.

IP ADDRESS (SAMPLE)

User Experience

2.1 Standby Screen Display
The WiPG/WiCS devices show the standby screen when the connected display/
projector is turned on. Elements shown on the standby screen include the
hostname, SSID, IP address, software download instructions and 4-digit security
code (login code/passcode). The display can be personalized to allow custom
login code and branding.
Customize your Start Up Display
Integrating your brand into your wireless presentation solution is an effective way to reinforce your
organization’s focus on wireless interaction and collaboration to your audience.
In addition to your logo or other company or school branding, a fully customized start screen can
include specific instructions on the preferred method for users to share their screen, a modern look
and feel, or other relevant information to users.

< WiCS

WiPG >

Default wePresent Display

Customize Visual Identity and provide clear User Instructions

Hostname & SSID

4-Digit Security Code

The hostname and SSID can be customized / renamed so
that users can easily identify and log into the correct device
if multiple units have been deployed on the network.

The security code prevents people outside the conference
room/classroom from being able to log into the
presentation.

IP Address
Each WiPG/WiCS device will be assigned an IP address.
By typing the IP address in a web browser, users will have
access to software download, admin panel, control panel,
and WebSlides for that particular device.

There are three settings of operation for the security login:
1) Random: a new 4-digit code is generated after the last
user disconnects.
2) Fixed: a static 4-digit code can be set from the
admin panel.
3) Disabled: 4-digit security code can be disabled through
the admin panel.

WiPG/WiCS Device Installation

To Present content to a wePresent, users will need to first make a connection.
Users can either connect to the wePresent’s own Wi-Fi signal, or when wePresent
is network-connected, through the local (wireless) network infrastructure.

3.1 Stand-Alone Connection Mode
No ethernet connection, own Wi-Fi signal on

Most wePresent models are able to broadcast their own Wi-Fi signal, becoming an access point/
hotspot that users can log on to present. Our range of models offers different broadcast options,
ranging between 2.4 GHz and 5 GHz (ac). All wePresent models that have ability to produce
Wi-Fi, can be used as stand-alone units, creating a secure wireless presentation environment. All
wePresent models support various levels of data encryption, ensuring your content is shared
safely and secure.
NOTE: Wi-Fi interference can cause of lag during a presentation. To ensure optimal conditions for
wireless presentation, always make sure that wePresent’s Wi-Fi channel is correctly separated from
other Wi-Fi activity, and that Wireless Access Points are not obstructed, or too far away.

WiPG/WiCS



Stand-Alone Connection Mode
Basic Diagram

DISPLAY

Recommended Enviroment
Small to medium size room with clear Wi-Fi having no
more than 5 other access points.

WiPG/WiCS Device Installation

3.2 Network Connection Mode (Option A)
Ethernet connected, own Wi-Fi signal off

The WiPG/WiCS device is able to connect to the local enterprise/school network via the Ethernet/
LAN port located in the back of the device using an Ethernet cable. In the network connection
mode Option A, the Wi-Fi signal of the WiPG/WiCS device will be disabled. Both guest and
internal users will access the WiPG/WiCS device through the access point (AP) on the
enterprise/school network.
In this setup, all traffic and wireless security is in the hands of the existing network.

Company/School
Network



Network Connection Mode
(Option A) Basic Diagram

WiPG/WiCS

Display

Recommended Enviroment
Office or school with many access points currently
installed. Network connection mode Option A is a good
option in environments where more than 10 WiPG/
WiCS units are closely deployed. This option is ideal for
networks that do not allow additional Wi-Fi APs due to
security concerns.

WiPG/WiCS Device Installation

3.3 Network Connection Mode (Option B)
Ethernet connected, own Wi-Fi signal on

wePresent can be connected to a network via the Ethernet/LAN port located in the back of the
wePresent. In network connection mode Option B, the wePresent will continue to broadcast a WiFi signal which acts as a wireless access point (WAP).
The gatekeeper feature can be used to restrict WAP connectivity allowing the WAP to act as an
additional network access point, or as an alternative (restricted) access point for guests.
This scenario allows guest users to connect to the wePresent’s in-room Wi-Fi signal, while internal
users connect over the corporate (wireless) infrastructure.

Company/School
Network



Network Connection Mode
(Option B) Basic Diagram

WiPG/WiCS

Display

Recommended Enviroment
Office or school with many access points currently
installed. Network connection mode Option B is a good
option in environments where more than 10 WiPG/WiCS
units are closely deployed. Also ideal for scenarios where
no corporate Wi-Fi AP exists or the corporate Wi-Fi is not
open to guest users.

NOTE: If wePresent is broadcasting its own Wi-Fi signal, the Gatekeeper security feature allows to
customize network connectivity over wePresent’s Wi-Fi signal. You can restrict network
access – allow all / block all / internet only – according to network’s security level.

WiPG/WiCS Device Installation

3.4 Network Connection Mode (Option C)
Ethernet connected, own Wi-Fi signal off

Your wePresent is able to connect wirelessly to the local enterprise network using Wi-Fi.
Depending on your wePresent model, it can connect over 2.4GHz, or 5GHz. To do this, set your
wePresent to Wi-Fi Station Mode in the ADMIN Panel. Once configured, both guest and internal
users can access the wePresent through the network enterprise’s access point.

Network Connection Mode (Option D)
Network connected as Wi-Fi Station, own Wi-Fi signal on

Alternatively you can set wePresent to Station & AP Mode. This will make your wePresent
behave as a repeating Access Point to the network enterprise’s access point. It is still possible to
manipulate the wireless settings to make wePresent broadcast a unique SSID, channel etc.
NOTE: If wePresent is broadcasting its own Wi-Fi signal, the Gatekeeper security feature allows
to customize network connectivity over wePresent’s Wi-Fi signal. You can restrict network
access – allow all / block all / internet only – according to network’s security level.

Company/School
Network



Network Connection Mode
(Option C & D) Basic Diagram

WiPG/WiCS

Display

Recommended Enviroment
Office or school with many access points currently
installed. Also an option when corporate network consists
of segregated VLAN’s. This option is ideal when network
policies do not allow additional Wi-Fi AP’s and Ethernet
connection is not available. Additionally, if wePresent is on
a movable AV cart, it can still be network connected while
it is mobile.

NOTE: In above scenario’s, performance may not be optimal due to two Air Hops between User
and wePresent.

WiPG/WiCS Device Installation

3.5 Deployment Options for Guest Network Access
In conference rooms, classrooms or meeting rooms, network managers need to be able to
accommodate both internal and guest users and their respective network privileges. The standard
network practice is to have a separate network for guest users to access, either a VLAN-based
network or a physical air-gap network.

3.6 VLAN Based Network (Option D)
Virtual LANs (VLANs) are partitions that network administrators have set to provide separate
networks for internal users and guest users in order to match different security requirements. The
VLAN deployment diagram shows how the WiPG/WiCS devices communicate with the internal
VLAN and guest VLAN.


Wireless
Company/School Users

VLAN Based Network Example

Wireless Guest Users

Color Key
Ethernet
HDMI

Wireless Access Point

Wireless Access Point
Company/School
Server

Company/School VLAN

Accept Incoming
Connections Only

Guest VLAN

Accept Incoming
Connections Only

WiPG/WiCS VLAN
Wired Company/School
User
Room 1 Display
Room 2 Display
WiPG/WiCS Device 1

WiPG/WiCS Device 2

WiPG/WiCS Device Installation

3.7 Data Transport
The WiPG/WiCS device employs a proprietary protocol to transport the screen data from a
computer or smart mobile unit to the WiPG/WiCS device. The data is encrypted and users
accessing the data will need the four-digit code shown on the display/projector when launching
the MirrorOp software.

WiPG / WiCS Data Transport


Wireless Company/School Users

ColorKey
Ethernet
HDMI

Wireless Access Point
Company/School
Server

Company/School Network

WiPG/WiCS Device

Wired Company/School User
Room Display

Connecting to WiPG/WiCS Device

4.1 Connecting Computers
Frequent Users - Software installation (advised)
MirrorOp Installation
For regular users presenting from Windows or Mac, it’s recommended to install the MirrorOp
software, (but not required). MirrorOp software installation can be downloaded from
wepresentwifi.com, or from your device’s Admin Panel.
There are no additional licensing fees for multiple software installations across the enterprise.

Guest Users - No software installation
Download & Show
For guest users it is easiest to download and run a MirrorOp executable file. This file allows users
to launch MirrorOp and connect to one target wePresent, without need to install the software. The
MirrorOp executable file is available on each wePresent’s Admin Panel (or can be gathered
and offered from an alternate location).
USB Plug & Show
Customizable Plug & Show USB tokens can be created for each individual wePresent unit. These
will works the same as the MirrorOp executable file, but the file is accessed via USB instead
of downlaoding.
NOTE: Download & Show and USB Plug & Show are the quickest way to allo guest users to target
wePresent without software installation in as few as 5 seconds.

Software Download We Page



(WiCS)

(WiPG)

Connecting to WiPG/WiCS Device

4.2 Detect wePresents
MirrorOp Device Discovery Scan
The MirrorOp software will by default perform a ‘Device Discovery Scan’ at startup. This Device
Discovery is a ‘UDP broadcast’, which generally won’t traverse network segments, therefore it will
only detect wePresents in the VLAN where the user is situated in.
Due to network segmentation, it may sometimes be better to avoid this Device Discovery Scan
and instead ‘target a specific wePresent’. Targetting a wePresent is especially useful when working
within a segemented network. The most obvious ways of targetting one wePresent is of course
Manual Entry of either the IP address or Hostname, as described below.
Since Manual Entry may be considered cumbersome in some situations, we have other options
that target a specific wePresent.



MirrorOp Device Discovery Screen

2000 test
Conference 2000
WiPG-1000
WiPG-2000

Device (SSID) Listing
To view a current listing of connected WiPG/WiCS devices,
click on the refresh icon
from the menu on computers or
drag down the window on mobile devices.

Manual Entry

Input hostname or IP

The WiPG/WiCS device allows users to manually enter the
hostname or IP address of the device in order to locate the
device. The hostname or IP address can be entered in the
“Input hostname or IP” field located at the bottom of Device
Discovery Screen on computers. On mobile devices, IP
address or hostname can be entered in the search field.

Connecting to WiPG/WiCS Device

4.3 Target a single wePresent
Use one of the ‘Direct IP Methods’
When users are located in a restricted network segment (VLAN), MirrorOp will not detect
wePresent units located in other network segments. Users that are connecting from a different
VLAN, or users that simply want to connect to a certain wePresent, can use our Direct IP Methods
to target a wePresent:
- Manual Input IP, or Hostname
- Guest Executable file - see page 12
- Plug & Show USB - see page 12
- Device Profile (.mop) - see page 12
- Favorites
- PresentSense
The methods listed below are IP-bound allowing a straight connection to a single target
wePresent. These methods don’t reply on a Device Discovery scan allowing them to traverse a
segmented network. In order to communicate to a wePresent, any firewall settings must allow port
communication between the use;’s and the targeted wePresent’s IP address.

Make Device Discovery traverse VLAN’s
Device Discovery is designed to limit unwanted activity over the entire network, however, it can be
manipulated to work over multiple VLAN’sthrough alternative ways. Modifying Device Discovery
should only be attmpted by qualified IT professionals.
Forward UDP Broadcast
The Device Discovery protocol uses a standard UDP broadcast. Network switches can be
configured to forward these broadcasts to the wePresent’s network segment.
VLAN Tagging
‘VLAN tagging’ can allow Device Discovery locate wePresents in other network segments.
Correctly configured VLAN tagging will allow Device Discovery to detect wePresents located in
other ‘stacked VLAN’s’.

Connecting to WiPG/WiCS Device

4.4 MirrorOp Software Development
Listed below are a few options for software deployments.

Guest Executable File
Users or the IT department can install the full MirrorOp (Sender) software directly from the admin
panel/web page of the WiPG/WiCS device. The option to download the quick executable
application (portable software) to launch MirrorOp is also available on the admin panel/web page.

Plug & Show USB
Click on the “Make PnS Token” icon on the standby screen to copy the MirrorOp (Sender)
executable file (protable software) to the attached USB drive. (Guest) users can launch the
MirrorOp executable file directly from the PnS token to connect to the target WiPG/WiCS device

Device Profile (.mop)
The WiPG/WiCS Device Profile (.mop) file provides a quick way to connect to a predefined
wePresent. By defining the WiPG/WiCS Device Profile, a user can double click on the file and it will
connect his MirrorOp software to the predefined WiPG/WiCS device automatically. In order for the
.mop file to recognized by your Operating System, the MirrorOp software needs to be installed!
From the wePresent’s IP based admin panel you can download the Device Profile (.mop). Y The
.mop file is a basic XML text file with the following template:
-------------------------------------------------------------------------------------------------------------------------

USERNAME
DEVICENAME
192.168.100.10
1234

-------------------------------------------------------------------------------------------------------------------------NOTE: IT professionals can easily manipulate variables in the XML file to create additional .mop
files for other units.

Connecting to WiPG/WiCS Device

MSI Install
Using MSI Installer, the enterprise IT department can deploy the MirrorOp software to users’
Windows laptops directly from the MSI command line.

Mobile Devices Connection
Smartphones and Tablets
When presenting from an iOS or Android device
(both smartphone and/or tablet), users will need to
install the MirrorOp Presenter App.
MirrorOp Presenter can be downloaded for free from
the Apple App Store or Google Play Store.

MirrorOp Presenter app

Native Mirroring - Apple Airplay & Google ChromeCast
Airplay
wePresent can provide basic or advanced Apple AirPlay mirroring based on the unit’s model. For
users to content and present using Apple AirPlay select the model from the availabl device list.
Both the presenter’s device and wePresent must be able to make a wireless network connection.
Google ChromeCast
Collaboration series wePresent models (WiCS) provide native mirroring from Google Chromecast
using the feature built into Chrome OS computers and via the Google Home app. For users to
content and present using Google Chromecast, select the model from the availabl device list. Both
the presenter’s device and wePresent must be able to make a wireless network connection.

WiPG/WiCS Customization

Domain Name Service
DNS - Hostname
An common way to connect to a target wePresent is to manually input the wePresent’s IP address.
Because inputting an IP address can be confusing for some users, it is possible to register a
Hostname for each wePresent IP address within your network domain (DNS). This allows users to
input the wePresents HostName in MirrorOp, instead of the IP address.

5.1 Admin Panel
The WiPG/WiCS device can be customized and configured through the built-in web pages of
the device called the “admin panel”. Parameters such as device IP address, WebSlides settings,
centralized management, and WiPG/WiCS connected (display) devices are set under the admin
menu option. The default password is admin, which can be changed.



System Status/Information Panel

(WiPG)
(WiCS)

5.2 Firewall Settings
The MirrorOp software communicates with the target WiPG/WiCS device passing through
network security systems such as firewalls. A set of rules need to be established so that traffic can
be filtered and passed through the firewall. The firewall administrator will be prompted by the
operating system to add a rule if a rule does not exist.
Port Table: The firewall administrator can allow or restrict certain data to be communicated from
the user to the WiPG/WiCS device using the port table.

WiPG/WiCS Customization

5.3 Port Table (WiPG-1000 / 1600w):

TCP

USAGE

DIRECTION

PORT#

NOTE

Command

Both

443
3268
389

Air play also uses this port.

Data

Both

8080
31865
515

Audio

Both

1688

Video

Both

1041

UolP

Both

3240
6000

Both

2869
49152
49153

DLNA

TCP/
UDP

Airplay

DLNA CMD port for connection created.

80
3689
7000
49153

Airplay

UDP

Used for screen projection and audio data transfer; need
to open it to let audio projection work.

Both

5353

Device
Discovery

Inbound

1047
1048
1049

Used for device discovery to find available devices; suggest
opening all these 3 ports (1047~1049), and otherwise application
can’t find devices; may need to enter IP/hostname manually.

NetBIOS
Name Service

Both

137

Standard port number. This if for hostname used with windows.

SNMP

Both

161

Standard port number. This is SNMP protocol port number.

DLNA

Both

1900
5000065500

SSDP broadcast used. DLNA will select one of these ranges to do
user action.

Airplay

554

WiPG/WiCS Customization

5.3 Port Table (WiCS - 2100):

TCP

UDP

USAGE

PORT#

MirrorOp Projection

1234

AirPlay & Google Cast

8008
8009
38351
47000
7000
7100

UolP

3240
6000

Web Page

7020
80
443

Rest API

4001

DNS

Devices Discovery

37994
5353

AirPlay Discovery

45690

NetBIOS Name Service

137
138

MirrorOp Projection

54022

DNS

DHCP

WiPG/WiCS Customization

5.4 Wi-Fi Protocol
WiPG/WiCS devices have both 2.4G and 5G Wi-Fi capability. Actual performance might vary due
to radio-frequency (RF) interference. For small-scale deployment, a Wi-Fi channel analysis tool
to find the proper available channel for the WiPG/WiCS device is recommended. For large-scale
deployment, consulting a professional Wi-Fi integrator, or utilizing the enterprise/school network’s
Wi-Fi via the Ethernet connection is recommended.

Channel Lists for the WiPG/WiCS device:
2.4G BAND

5G BAND

CHANNEL

FREQUENCY
(MHZ)

EU*

CHANNEL

FREQUENCY
(MHZ)

EU*

2412

Yes

5180

Yes

2417

Yes

5200

Yes

2422

Yes

5220

Yes

2427

Yes

5240

Yes

2432

Yes

149

5740

Yes

2437

Yes

153

5765

Yes

2442

Yes

157

5785

Yes

2447

Yes

161

5805

Yes

2452

Yes

165

5825

Yes

2457

Yes

2462

Yes

2467

Yes

2472

Yes

*EN 300 328 V1.9.1. Regulation

Adaptive Frequency Hopping of EN 300 328
V1.9.1 regulation requests the WiPG/WiCS
device to implement the mechanism like Detect
and Avoid (DAA) when an equipment identifying
frequencies is being used by other devices. The
Wi-Fi signal of the WiPG/WiCS device needs to
be temporarily turned off if there is interference
from different Wi-Fi access points or RF devices
in the same environment.

WiPG/WiCS Customization

5.5 Bandwidth Usage Scenario´s
Bandwidth Allocation
It is common to limit bandwidth activity or to prioritize bandwidth usage for certain processes The
diagrams below outline the bandwidth requirements for different types of presentations.

Powerpoint

6.000.000

MirrorOp start

5.000.000

4.000.000

3.000.000

2.000.000

Powerpoint slide changes

Bits / 1sec

1.000.000

0
0

Time (sec)

100

120

Web Browsing

12.000.000

Open web site

10.000.000

Navigate web site, load new content

8.000.000

MirrorOp start

6.000.000

MirrorOp stop

4.000.000

Bits / 1sec

2.000.000

0
0

Time (sec)

105

WiPG/WiCS Customization

Local 720p Video
Stop 720p Full Screen Video
10.000.000

Start 720p Full Screen Video

8.000.000

MirrorOp start

MirrorOp stop

6.000.000

4.000.000

Bits / 1sec

2.000.000

0
0

Time (sec)

100

120

Local 1080p Video
12.000.000

Stop 1080p Full Screen Video

Start 1080p Full Screen Video

10.000.000

8.000.000

MirrorOp stop

MirrorOp start

6.000.000

4.000.000

Bits / 1sec

2.000.000

0
0

Time (sec)

100

125

150

1080p Youtube (online)
48.000.000

Start YouTube Video

40.000.000

32.000.000

MirrorOp start

24.000.000

MirrorOp stop

16.000.000

Bits / 1sec

8.000.000

0
0

Time (sec)

100

125

150

WiPG/WiCS Device Secuirty

6.1 GuideWiPG/WiCS Device Security
Network security consists of different polices adopted to prevent and monitor unauthorized access,
misuse, and/or modification of network resources. The WiPG/WiCS device has been designed to
work in and adhere to a variety of computer network security environments: businesses, education,
government and other public entities.
When the WiPG/WiCS device is connected to a corporate/school network, all traffic from the
device is treated as from the corporate/school network. With the WiPG/WiCS WiFi disabled, the
device sits on the network like any other network device (printer, etc.). It is important to remember
that when connected to a corporate/school network, the WiPG/WiCS device is as secure as the
standards set by the supporting network.

WiPG/WiCS Device Secuirty

6.2 GuideWiPG/WiCS Secuirty Features
Enhanced security features are implemented in the WiPG/WiCS system to ensure the
confidentiality, integrity and availability of the information communicated with the
WiPG/WiCS system. (Table on next page)
MODULE/APPLICATION

SECURITY ENHANCEMENT

NOTE

Screen data

AES Encryption, 128-bit key
Salsa20 Encryption

(WiPG-1000/1600w) (WiCS-2100)

Audio data

No encryption

(WiPG-1000/1600w, WiCS-2100)

Control data, command data

AES Encryption, 128-bit key
Salsa20 Encryption

(WiPG-1000/1600w) (WiCS-2100)

Web server

http (port 80), https (port 443)

Lighttpd (version: 1.4.4.1)
OpenSSL (version: 1.0.2h)

Download

http (port 80) No encryption

Conference control

https (port 443)

Web management data

https (port 443)

Web security assessment
(WiPG-1000/1600w)

Patched

OWASP TOP 10 common
Web Vulnerabilities

SNMP v2 Protocol, SNMP v3 Protocol

(WiPG-1000) (WiPG-1600w)

MIRROROP

WEB

REMOTE MANAGEMENT
SNMP (WiPG-1000/1600w)
CMGS (WiPG-1000/1600w, WiCS-2100)

Based on REST API

WIFI NETWORK
WEP, WPA, WPA2, WPA-Enterprise,
WPA2-Enterprise.

(WiPG-1000/1600w, WiCS-2100)
(WiPG-1000/1600w)
(WiPG-1000/1600w)

Firmware

MD5 encryption AES 256, RSA 4096

(WiPG-1000/1600w) (WiCS-2100)

Telnet, SSH

Disabled

Port scan (WiPG-1000/1600w)

Done

Vulnerability scan (WiPG-1000/1600w)

Patched

WiFi
WEPRESENT SYSTEM

Nexpose.com

APPLICATION

Windows

Digital signature

Mac

Digital signature

Firmware Upgrades

7.1 Single Device (Web Interface)
The WiPG/WiCS device supports firmware upgrades via the web interface. The upgrade is
deployed as a single file that is uploaded and programmed by the device. The firmware upgrade
takes approximately 5 minutes to load.

7.2 Multiple Devices
wePresent provides a management feature to upgrade multiple WiPG-1000/WiPG-1600w /WiCS2100 devices remotely. Users can configure and start the FTP firmware upgrade via SNMP/REST
API (CMGS) .

Deployment Scenarios

8.1 Classroom with one wePresent
One main (interactive) display, with one moderator

Main Display
Presentation
•

Present content from a device

•

Instructors can use Moderator Control features to allow students to present content
from their own device (up to 4 at a time).

Interaction (Touch Screen / USB Mouse)
•

Control any computers on the touch display, or with mouse.

•

When content is projected, annotations can be made on top of the presentation.

•

Write draw at any time on virtual whiteboard

Collaboration (WebSlides)
•

With Webslides, content shown on wePresent can be viewed and saved by the class
on their own device.

Deployment Scenarios

8.2 Classroom with multiple wePresents
One main display, with one moderator and multiple (interactive) workgroups

Workgroups
Presentation
•

Students present content from their own device (up to 4 at a time).

•

Or, present content from any other HDMI device with a SharePod.

•

Content from one wePresent to other wePresent units.

Interaction (Touch Screen / USB Mouse)
•

Control any computers on the touch display, or with mouse.

•

When content is projected, annotations can be made on top of the presentation.

•

Write draw at any time on virtual whiteboard

Collaboration (WebSlides)
•

With Webslides, content shown on wePresent can be viewed and saved by the class
on their own device.

Deployment Scenarios

8.3 Conference Room with one wePresent
One main (interactive) display, no moderator

Main Display
Presentation
•

Present content from a device

•

Allow multiple users can present contetn from their own device (up to 4 at a time).

Interaction (Touch Screen / USB Mouse)
•

Control any computers on the touch display, or with mouse.

•

When content is projected, annotations can be made on top of the presentation.

•

Write draw at any time on virtual whiteboard

Collaboration (WebSlides)
•

With Webslides, content shown on wePresent can be viewed and saved by
conference particpants.

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Language                        : en-GB
XMP Toolkit                     : Adobe XMP Core 5.6-c138 79.159824, 2016/09/14-01:09:01
Create Date                     : 2017:08:30 17:29:09+01:00
Metadata Date                   : 2017:08:30 17:29:26+01:00
Modify Date                     : 2017:08:30 17:29:26+01:00
Creator Tool                    : Adobe InDesign CC 2017 (Macintosh)
Instance ID                     : uuid:5feac788-faf7-1248-9685-6dfe80839696
Original Document ID            : xmp.did:85a29bb9-26b3-49fd-8f59-d79788dc5294
Document ID                     : xmp.id:47f35800-1c52-4897-8a4b-df93c529c0aa
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:cefe7537-2c50-443e-a175-06750c0ce9a0
Derived From Document ID        : xmp.did:cefe7537-2c50-443e-a175-06750c0ce9a0
Derived From Original Document ID: xmp.did:85a29bb9-26b3-49fd-8f59-d79788dc5294
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Macintosh)
History Changed                 : /
History When                    : 2017:08:30 17:29:09+01:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 27
Creator                         : Adobe InDesign CC 2017 (Macintosh)

EXIF Metadata provided by EXIF.tools

Wi CS 2100, PG 1600, 1600W Network Deployment Guide

Navigation menu

Versions of this User Manual:

Views

Navigation