Zonix Spec Sheet
2014-01-16
: Zonix Spec Sheet zonix spec sheet images 1148 p4dbimg
Open the PDF directly: View PDF 
.
Page Count: 3
The Zonix™
FP4620 Series
SPECIFICATION SHEET
Product Specications Subject To Change
ZONIX™
FP4620** / FP4630SN
Ceiling Fan
7´ min
Floor
Ceiling
Net Hanging Weight: 20 lbs
6˝ dia
14° Blade Pitch
INSTALLATION REQUIREMENTS:
Fan must be attached to a securely anchored electrical
junction box capable of withstanding a load of at least 50 lbs.
ELECTRICAL REQUIREMENTS:
Requires a grounded electrical supply line of
120 volts AC, 60 Hz, 15 amp circuit.
MOTOR SPECS:
153 x 18 motor is designed for optimal performance with this fan.
220 VAC, 50 Hz export version available.
BLADES:
A set of three 26˝ reversible cherry/walnut wood blades is included.
Optional sets of three 20˝ wood blades are available in reversible cherry/walnut (B4442CWR) and satin nickel (B4442SN)
finishes—sold separately. Optional sets of three 20˝ composite blades are available in cherry (BPW4442CY) and walnut
(BPW4442WA) finishes —sold separately.
CONTROL OPTIONS:
CW40 fan-only wall control is included. Reversing switch located on fan housing. Instructions are provided with each
control. Optional C2 wall control and C4 hand-held remote with receiver are available—sold separately.
LIGHTING OPTION:
A single-bulb downlight fixture with 13 watt, energy-efficient CFL bulb included is available—sold separately. Maximum
downlight wattage not to exceed 13 watts. NOTE: Fan supplied with fan only wall control. Light kit will require use of
C25* wall control and/or C4FL hand-held remote control with receiver unit —sold separately.
*C25 wall control must be used with C4 remote control
DOWNROD OPTIONS:
Fan comes with a 1˝ dia. x 6˝ long do .shtgnel ˝27 dna ˝06 ,˝84 ,˝63 ,˝42 ,˝81 ,˝21 ni elbaliava sdornwod lanoitpO .)6-1RD( dornw
A downrod coupler is available for installations requiring a downrod longer than 72˝. Fan can be mounted on a sloped ceiling
up to 30°. Most sloped ceiling installations require a downrod longer than the standard 6˝ downrod. Optional sloped ceiling ball
kits (SCB1-52) are available for slope angles greater than 30° and up to 52°. Call technical support for more information.
LOCATION USE:
Fan is rated for dry locations only, however, is damp location rated if used with composite blades listed above.
Airflow / Energy Efficiency Info (120V)
Fan Speed Max RPM CFM
CFM / Watts
Amps Watts
High 145 4529 83 0.45 55
H-Med 99 2987 108 0.32 28
L-Med 70 2008 133 0.23 15
Low 49 992 126 0.17 8
Available Finishes
OB Oil-rubbed bronze—reversible cherry/walnut
SN Satin nickel—reversible cherry/walnut
SN Satin nickel—satin nickel
A
Blade Sweep
26˝ Blade = 54˝ dia
20˝ Blade = 42˝ dia
B
A B
Fan w/6˝ downrod 15.40˝ 12.90˝
Fan w/12˝ downrod 21.40˝ 18.90˝
Fan w/18˝ downrod 27.40˝ 24.90˝
Fan w/24˝ downrod 33.40˝ 30.90˝
Fan w/36˝ downrod 45.40˝ 42.90˝
Fan w/48˝ downrod 57.40˝ 54.90˝
Fan w/60˝ downrod 69.40˝ 66.90˝
Fan w/72˝ downrod 81.40˝ 78.90˝
10983 Bennett Parkway
Zionsville, IN 46077
Toll Free (888) 567-2055
FAX (866) 482-5215
Outside U.S. call (317) 733-4113
Visit Our Website @ www.fanimation.com 2010/01
Copyright 2010 Fanimation, Inc.
All Rights Reserved
