Accreditation DWS PWR Certificate
User Manual: accreditation-DWS-PWR-certificate of /wp-content/uploads
Open the PDF directly: View PDF 
.
Page Count: 2
Component Approval Certificate
This is to certify that:
Intertek BEAB Mark
Certificate
Certificate No 20204
Warmup PLC
Product: Under-floor heating element
EN60335-1:2012; EN60335-2-96:2002+A1,A2;
Certification body: ITCL
Issued Date: 27 March 2014
04 March 2019
BEAB Ref: CRE 0110
Intertek BEAB Mark
The BEAB Mark is a symbol of
electrical safety for your
customers and evidence to the
authorities that Intertek has
independently certified your
product's compliance to the
relevant European safety
requirements. Intertek
exclusively provides the BEAB
Mark - a recognised symbol of
safety since 1960.
Authorising Manager
is authorised to use the APPROVAL MARK set out above, on the following goods
Issue No: 3
Limitations:
Installation of elements according to the manufacturers
instructions is not covered by the scope of EN60335-2-
96, however the test methods are considered to be
applicable.
This Certificate is issued in accordance with the Certification Regulations governing its use and in reliance on the undertaking given by the
Licensee and only extends to the use in respect of the goods produced to an acceptable degree of compliance with the Approval Standard.
This Certificate is not transferable and remains the property of Intertek Testing and Certification Ltd.
This approval will be reviewed at the date shown, or earlier if
preceded by the withdrawal of the Standard on which the Approval of
the product was based.
Review Date:
Brand Name: Warmup
Model Name: DWS & PWR range
The product complies
with the standard(s):
Authorising Engineer
Report Number: SBD
702 Tudor Estate, Abbey Road, Park Royal, London, NW10 7UW, UK
Intertek Testing and Certification Ltd, Intertek House, Cleeve Road, Leatherhead, Surrey, England. KT22 7SB.
Tel: +44 (0) 1372 370900 Fax: +44 (0)1372 370943 Email: certificates@intertek.com Web: www.intertek.com
Page 1 (see models on page 2)
Intertek BEAB Mark
Certificate
Certificate No 20204
Characteristics Factory Code
Component Approval Certificate
Brand and Type/Model
230Vac, 13.5W/m THERIN.01Warmup DWS300
230Vac, 12.5W/m THERIN.01Warmup DWS400
230Vac, 13.5W/m THERIN.01Warmup DWS600
230Vac, 12.5W/m THERIN.01Warmup DWS800
230Vac, 13.5W/m THERIN.01Warmup PWR range
This Certificate is for the exclusive use of Intertek's Client and is provided pursuant to the Certification agreement between Intertek and
its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to
any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this
certificate. Only the Client is authorized to permit copying or distribution of this certificate and then only in its entirety. Use of Intertek’s
Certification mark is restricted to the conditions laid out in the agreement. Any further use of the Intertek name for the sale or
advertisement of the tested material, product or service must first be approved in writing by Intertek. Initial Factory Assessments and
Follow up Services are for the purpose of assuring appropriate usage of the Certification mark in accordance with the agreement, they
are not for the purposes of production quality control and do not relieve the Client of their obligations in this respect.
Intertek Testing and Certification Ltd, Intertek House, Cleeve Road, Leatherhead, Surrey, England. KT22 7SB.
Tel: +44 (0) 1372 370900 Fax: +44 (0)1372 370943 Email: certificates@intertek.com
Page 2 of 2
Issued Date: 27 March 2014
BEAB Ref: CRE 0110
Issue No: 3
Review Date: 04 March 2019
