Accreditations 4i E 3i TEMPO Certificate No 20541 Issue 7
User Manual: accreditations-4iE-3iE-TEMPO-Certificate-No-20541-Issue-7 of /wp-content/uploads
Open the PDF directly: View PDF .
Page Count: 3
Download | |
Open PDF In Browser | View PDF |
Product Approval Certificate Intertek BEAB Mark Certificate Intertek BEAB Mark The BEAB Mark is a symbol of electrical safety for your customers and evidence to the authorities that Intertek has independently certified your product's compliance to the relevant European safety requirements. Intertek exclusively provides the BEAB Mark - a recognised symbol of safety since 1960. Certificate No 20541 This is to certify that: Warmup Plc 702 Tudor Estate, Abbey Road, London, NW10 7UW, UK is authorised to use the APPROVAL MARK set out above, on the following goods Product: Programmable Thermostat Brand Name: Warmup Model Name: 3IE-01-**-01, 3IE-01-**-02, ELT-01-**-01, ELT-01-**-02, 4IE-01-xx01 and 4IE-01-**-02 Report Number: 130101774SHA-001 (Modification 2, January 2015) The product complies EN60730-1:2000+A1,A2,A12,A13,A14,A15,A16; EN60730-2with the standard(s): 9:2010 This Certificate is issued in accordance with the Certification Regulations governing its use and in reliance on the undertaking given by the Licensee and only extends to the use in respect of the goods produced to an acceptable degree of compliance with the Approval Standard. This Certificate is not transferable and remains the property of Intertek Testing and Certification Ltd. This approval will be reviewed at the date shown, or earlier if preceded by the withdrawal of the Standard on which the Approval of the product was based. Limitations: Note; ** denotes product housing colour (Refer to Page 3 for details) Authorising Engineer Certification body: ITCL BEAB Ref: CAT 0732 Issued Date: 09 November 2015 Review Date: 13 January 2020 Issue No: 7 Authorising Manager Intertek Testing and Certification Ltd, Intertek House, Cleeve Road, Leatherhead, Surrey, England. KT22 7SB. Tel: +44 (0) 1372 370900 Fax: +44 (0)1372 370943 Email: certificates@intertek.com Web: www.intertek.com Page 1 of 2 Product Approval Certificate Intertek BEAB Mark Certificate Certificate No 20541 Voltage: 230Vac: 50Hz Current: 16A Resistive load Tmax: 50 ºC (4IE models); 55°C (all other models) Tmin: 0°C Automatic Cycles: 100 000 Manual Cycles: 600 Automatic Action Type: Type 1B Contact Separation: Micro-disconnection Construction: Type 1 Dirt Protection: PD2 Moisture Protection: IP33 (4IE models); IP20 (all other models) Heat Fire Tracking: Cat D - Heat 125°C, Fire 850°C, Tracking 175V Engagement Type: Engagement Weights: Number of cycles performed: Brand and Type/Model Characteristics Factory Code Warmup 3IE-01-**-01 230V, 50Hz, 3680W, 16A, Class II EMEMCH.01 Warmup 3IE-01-**-02 230V, 50Hz, 3680W, 16A, Class II EMEMCH.01 Warmup 4IE-01-**-01 230V, 50Hz, 3680W, 16A, Class II EMEMCH.01 Warmup 4IE-01-**-02 230V, 50Hz, 3680W, 16A, Class II EMEMCH.01 Warmup ELT-01-**-01 230V, 50Hz, 3680W, 16A, Class II EMEMCH.01 Warmup ELT-01-**-02 230V, 50Hz, 3680W, 16A, Class II EMEMCH.01 BEAB Ref: CAT 0732 Issued Date: 09 November 2015 Review Date: 13 January 2020 Issue No: 7 Intertek Testing and Certification Ltd, Intertek House, Cleeve Road, Leatherhead, Surrey, England. KT22 7SB. Tel: +44 (0) 1372 370900 Fax: +44 (0)1372 370943 Email: certificates@intertek.com Page 2 of 3 3IE-01-**-01 3IE-01-**-02 ELT-01-**-01 ELT-01-**-02 4IE-01-**-01 4IE-01-**-02 ** denotes product housing colour where; BL = Piano black (no change) CC = Classic Cream was Oyster white CW = Cloud White was Porcelain white PW = Porcelain White was Cloud white WH = Traffic white (no change) NL = Taupe as Brown SG = Silver Grey was Charcoal grey OB = Onyx Black BP = Black Porcelain Amended colour codes This Certificate is for the exclusive use of Intertek's Client and is provided pursuant to the Certification agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this certificate. Only the Client is authorized to permit copying or distribution of this certificate and then only in its entirety. Use of Intertek’s Certification mark is restricted to the conditions laid out in the agreement. Any further use of the Intertek name for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. Initial Factory Assessments and Follow up Services are for the purpose of assuring appropriate usage of the Certification mark in accordance with the agreement, they are not for the purposes of production quality control and do not relieve the Client of their obligations in this respect. BEAB Ref: CAT 0732 Issued Date: 09 November 2015 Review Date: 13 January 2020 Issue No: 7 Intertek Testing and Certification Ltd, Intertek House, Cleeve Road, Leatherhead, Surrey, England. KT22 7SB. Tel: +44 (0) 1372 370900 Fax: +44 (0)1372 370943 Email: certificates@intertek.com Page 3 of 3
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : magdalena.napiorkows Create Date : 2015:11:20 10:12:47Z Modify Date : 2015:11:20 10:12:47Z Title : XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2015:11:20 10:12:47Z Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Creator : magdalena.napiorkows Document ID : uuid:72c861db-3833-48e3-9409-708da1a1d738 Instance ID : uuid:383af8ea-7984-49dc-a695-48521b42f970 Producer : Acrobat Distiller 11.0 (Windows) Page Count : 3EXIF Metadata provided by EXIF.tools