PDF Anschutz 1903
Anschutz 1903 Anschutz 1903
Anschutz 1903 The Eye | File Listing
User Manual: PDF T E X T F I L E S
Open the PDF directly: View PDF 
.
Page Count: 13
| Download | |
| Open PDF In Browser | View PDF |
04/02 Bedienungsanleitung Fabr.-Nr.: Serial No.:.......................................................................... Instruction Leaflet Bitte hier eintragen · Please fill in here Originalschussbild Ihres Gewehres 10 Schuss auf 50 m Original group of your rifle 10 shots at 50 m KK-Matchgewehre Small Bore Target Rifles J.G. ANSCHÜTZ GmbH & Co. KG Jagd- und Sportwaffenfabrik Daimlerstrasse 12 D-89079 Ulm / GERMANY Postfach 11 28 D-89001 Ulm / GERMANY Telefon (++49)-(0)-731-4012-0 Telefax (++49)-(0)-731-4012-700 anschuetz-sport.com JGA-Info@anschuetz-sport.com DGG · 04/02/2.500 Mod. 1903 / 1903 D · 1903 L / 1903 LD Bitte sorgfältig lesen, bevor Sie dieses Gewehr zusammenbauen oder benutzen. Please read carefully before you assemble or operate this rifle. Index Preface .......................................................... p.15 Safety instructions ........................................ p.15 General handling of rifles ........................... p.16 Ear and eye protection ................................ p.17 Laws .............................................................. p.17 Product relating safety instructions ............. p.17 Liability .......................................................... p.18 Technical data .............................................. p.18 Assembly, fitting the ANSCHÜTZ barreled action ... p.18 Cocking, loading and safety operation ..... p.19 Unloading ..................................................... p.19 Trigger ........................................................... p.20 Order-numbers ............................................. p.23 Adjustment of the putt plate ........................ p.24 Cleaning, maintenance, care, lubrication .. p.24 Accessories ................................................... p.25 Warranty ....................................................... p.26 Copyright ...................................................... p.26 Drawings / Spare parts .............................. p.28 Warranty card .............................................. p.39 2 3 Preface Dear Friends of ANSCHÜTZ, You have made a good choice, now that you have decided to buy an ANSCHÜTZ product. The many great results obtained with ANSCHÜTZ rifles by target shooters, participants in the Olympic Games as well as in World and European championships made your choice easy, as your rifle has benefited from our great experience of making fine sporting and target rifles since 1856. World-wide, ANSCHÜTZ rifles are respected because of their fine accuracy, impeccable design and immaculate workmanship. Should you still be unaware, they include: Air rifles, repeater summer biathlon air rifles, small bore biathlon rifles, Flobert rifles, small bore single loaders and repeaters, hunting rifles and shotguns in diverse calibers, the famous ANSCHÜTZ small bore target rifles and air rifles and silhouette pistols and silhouette rifles. Safety instructions Attention: have problems with the safe usage and correct handling of your rifle or should you have additional questions, please do not hesitate to contact a competent gunsmith or dealer or address our factory directly. This instruction leaflet is extraordinarily important. Make sure that it is always with the rifle especially when it is sold, lent or otherwise given to a third person. Our products are exclusively meant for target shooting. Their use is subject to the „General Technical Rules“ for all target shooting disciplines of the INTERNATIONAL SHOOTING SPORT FEDERATION (ISSF), Bavariaring 21, 80336 München, Germany or to the rules of the INTERNATIONAL BIATHLON UNION, Airportcenter, Postbox 1, A-5073 Wals-Himmelreich, Austria. Additional copies of this booklet can be ordered. Warning: This rifle can be dangerous if it is not used correctly or if this instruction leaflet is not observed. The privilege of ownership and safe use of your rifle carries a personal responsibility that no one should take lightly. Rifle accidents would not occur if the following rules of shooting safety were observed. Please read carefully the following articles before using this rifle. It is extremely important that you become thoroughly familiar with this rifle and its operating characteristics by carefully reading and understanding the instructions in this booklet before you attempt any use of it with ammunition. Always remember the sequence of disassembly. Should you still 14 15 General handling of rifles 1. Treat every rifle as though it was loaded. Do not take anyone’s word or automatically assume it is not loaded. Check your rifle personally each time you handle it. The safe and courteous way to carry a rifle when you are with others is to leave the bolt open so that they can easily see that the rifle cannot be fired. Make sure that the rifle is not loaded when you stop shooting. Make sure your rifle is unloaded before every transport. Never pick up your rifle with your finger on the trigger or the trigger guard. 2. Whenever you pick up your rifle, point the muzzle at the ground. Always point the muzzle of the barrel in a safe direction. Never pull a rifle towards you by the muzzle. 3. Only use your rifle in approved shooting ranges. Shoot your rifle only under good visibility and daylight conditions. If you use your rifle in an indoors range, make sure it is adequately ventilated. Make sure that there is a safe bullet trap which can be seen from all sides and that there is no one in the vicinity of your target. Be absolutely sure of a safe backstop and target. Never fire at a hard, smooth surface or water. Never shoot at a skyline target or into the air. Do not shoot at anything from which a bullet may ricochet. Never fire your rifle with the muzzle in the water or against any other material to avoid an accident or damage of your rifle. 4. Be sure that you use the correct ammunition. The correct calibre can be seen on your rifle. Load your rifle only when you are at the range and ready to shoot. 16 5. Always keep your rifle clean. Be sure the bore is not obstructed by pellets or bullets, dirt, water, grease or any other foreign materials. 6. Place the safety fully into „S“ or „F“ position - never inbetween. Always keep safety in full „safe“ position until ready to fire. Do not put your finger on the trigger when operating the safety or whenever you are not ready to shoot. 7. When not in use your rifle should be stored in a locked and secure place accessible only to you. Check first to make sure it is unloaded. Store the rifle with uncocked trigger. Store ammunition in a separate and secure place. It is your special responsibility to make sure that at all times and especially when you are not present your rifle is well secured, out of any reach of children and other unauthorised persons and in no way accessible to them. For the safe storage of your rifle even in a locked cabinet or safe the use of an additional trigger lock is recommended. Only give your rifle to authorised persons. Never let your rifle be used by anyone who is not familiar with the safe handling of a rifle and these instructions. This rifle must only by used by a responsible adult or under his or her supervision. 8. Watch for any change in the operation of your rifle which might impair its safety. If you suspect or note a defect or malfunction, stop using it immediately, unload the rifle, make sure that it is not under pressure and send it to a competent gunsmith, the factory or its recommended repair station for inspection. Note: Apart from normal cleaning the rifle must only be disassembled by an authorized gunsmith. Unqualified handling or disassembly can cause injuries or irreparable damage of the rifle. 9. Your rifle should always be handled with extreme care. Make sure that it is never dropped or placed in such a way that it can fall. For transport purposes your rifle should be dry and clean. We recommend an approved protective gun case. 10. You must be in good physical condition and mental health and not under the influence of any substance (drugs, alcohol) which might impair vision, dexterity or judgement. Do not use your rifle when you are tired. Tiredness may result in a loss of control. 11. Clean your hands carefully after shooting and cleaning your ANSCHÜTZ product. Residues of bullets, powder or oil might impair the health of your skin. 12. Your ANSCHÜTZ rifle has been carefully built and inspected by skilled technicians to provide maximum efficiency. The service life depends on the owner’s care and on cleaning following the owner’s manual closely. Ear and eye protection You and other persons should always use approved hearing protection and approved shatterproof eye protection while shooting. ponding regulations and laws for the use of firearms in your country. Product relating safety instructions Important note for the handling of rifles: 1. Unload your rifle immediately if you do not intend to continue shooting. Remove the bolt or leave it open at least. In the case of a repeater remove the magazine as well. Make sure there is no cartridge left in the chamber. 2. Make sure there is nobody in the area of case ejection. 3. If you store the rifle remove the bolt and store the bolt uncocked in a separate place. Important note for the handling of ammunition: 1. Exclusively use clean, factory loaded and new ammunition in the caliber approved for your rifle. 2. Be aware that the range of a bullet starting from cal. .22 l.r. might be 1.6 km or even longer. Therefore also be sure of the safety of the impact area. Laws When using a rifle observe the corres- 17 Liability 1. ANSCHÜTZ does not assume any responsibility or payment of damage claims for damages of any kind resulting from the disregard of these instructions, non-qualified treatment or repair, the use of non-original ANSCHÜTZ spare parts, incorrect handling, negligence, removal of the knot varnish or unauthorized modifications. 2. The stock of this rifle has been very carefully checked by factory inspectors prior to shipment and has been determined to be free of defects. Certain kinds of abuse, such as dropping of the rifle can cause damage to the stock for which the owner is solely responsible. We also assume no responsibility for defects resulting from inappropriate transportation (mail, plane, etc.). Please immediately contact your transporter in such a case. 3. Changes or alterations to this rifle or any of its parts are prohibited. Such changes or alterations can significantly impair the safe use of our product and can lead to accidents involving severe or even fatal bodily injuries. Any product warranty will automatically lapse in case changes or alterations are implemented. Users are requested to carefully inspect the product with regard to possible changes and alterations before use. In case of doubt you should contact us for further information. 18 Small bore target rifles Mod. 1903 · 1903 D Technical Data: Caliber: Barrel length: Rifling: Total length: Total lengthSystem: Weight approx.: Version: .22 l.r. 65 cm/25.5“ 65 cm/25.5“ 110 cm/43.3“ 76 cm/29.9“ 4,6 kg/10.1 lbs Single loader 5 Nm (= 50 cmkp) for wood stocks. •Pull a cleaning patch through the barrel from the chamber towards the muzzle several times. After assembly for the first time large settlements of the stock wood may occur. Consequently we suggest that you tighten the screws once more in the manner described after some time. Check the the screws before every shooting. Assembly, fitting the ANSCHÜTZ barreled action Cocking, loading and safety operation The stock, the barreled action and the bolt are packed separately for shipment and need to be assembled. However, do not do this until you have followed all the procedures listed below. •Degrease the bolt and the interior of the barrel without leaving lint. •Open the bolt and pull it back to the stop. Carefully insert an approved cartridge with the bullet forward with the thumb into the chamber. Make sure that the bullet is not damaged. •Now push the bolt forward to close the breech and ensure that the bolt handle is pushed completely downwards to lock it. The bolt is now locked and cocked. •After firing, lift the bolt handle and pull the bolt fully to the rear. This will cock the bolt again and eject the empty case. The safety is located on the left-hand side of the receiver. It can be operated in cocked position. •Wipe away excess oil from the barreled action and the bolt. •Cock the bolt by turning the guide bolt and the bolt handle opposite to each other. •Insert the bolt by actuated trigger. •Insert the barreled action into the barrel channel in the stock and press both parts together. •Screw in bedding screws with enclosed Allen wrench Model No. 4406 (Order No. 710.6301). First slightly tighten all screws. Then tighten the front screws and subsequently the rear screws (in the direction of the muzzle). For correct adjustments we recommend our torque wrench model No. 4405 (Order No. 700.6180), which is to be adjusted to Unloading For safety reasons the rifle must immediately be unloaded if you intend to stop shooting. Unlock and open the bolt. This will eject the cartridge. Please also see safety instructions for the handling of rifles and pistols. The rifle is: •safe, when the „S“ (safe) is visible but the „F“ (fire) is covered •ready for shooting when the „F“ (fire) is visible but the „S“ (safe) is covered. 19 2. Sear engagement The sear engagement is the distance between the second stage and the release of the trigger. Important note: t r e Trigger Warning: Your ANSCHÜTZ target rifle offers you a versatility of individual adjusting properties. Please make sure that your rifle always is unloaded when carrying out adjustments. 1. Trigger weight Adjust the trigger weight with set screw No. 2: •if you turn it to the right: trigger weight is increased (+) •if you turn it to the left: trigger weight is decreased (-) Trigger weight and first stage weight depend on each other with regard to the mechanic mechanism. If one of them is changed there will always be a corresponding change of the other as well. 20 To protect your precise trigger and to guarantee perfect operation you should always close the action carefully. If the sear engagement of single stage triggers is too small and the trigger weight is too low or if the first stage of two-stage triggers is too short, the trigger might release inadvertently by a sudden impact or too powerful closing of the action if the gun is loaded and not in the ”safe“ position. Adjustment of the sear engagement for assembled two-stage triggers with set screw No. 1: •if you turn it to the left: sear engagement is shortened •if you turn it to the right: sear engagement is extended Adjustment of an optimum sear engagement: Make sure your rifle is not loaded. Cock your rifle and release the trigger. Check if the trigger releases as desired. •Repeat this process until you do not feel the second stage anymore. Then turn 1/4 turn back to the right. Thus the optimum sear engagement is adjusted. The sear engagement is too short: There is no second stage. The trigger releases un-defined without second stage. •Turn set screw No. 1 clockwise for at least 1/4 turn after cocking. Then release the trigger and check if there is a second stage. If not, repeat this procedure until you feel a second stage. •As soon as you feel a second stage proceed according to the points of the paragraph „The sear engagement is too long“ to obtain an optimum sear engagement. Adjustment of the optimum sear engagement for assembled single stage triggers with set screw No. 1: •Cock the rifle. •Turn set screw No. 1 (first stage) as long to the right until the trigger releases. •Turn set screw No. 1 from this position approx. 1/4 turn to the left. Warning: Single stage triggers are very sensitive and must be operated with special care. 3. Malfunctions of the trigger due to wrong adjustment procedure If the trigger is not adjusted correctly malfunctions may occur, tampering with the trigger adjustments will not result in any success. Therefore proceed as follows: After every change the function of the trigger must be checked. When the malfunction is removed check the desired trigger values and adjust them again if necessary. The trigger catches the cocking piston or firing pin, but the trigger does not release: •Make sure that the safety of the trigger is released. The trigger does not catch the cocking piston or firing pin: •The first stage trigger is adjusted too tightly. •Turn set screw No. 1 approx. 1-2 turns to the left. Procede according to par. 2. 4. Safety There is a safety lever at the right side of the trigger. Please see chapter „Cocking, loading and safety operation“. 5. Maintenance The sear engagement is too long: There is a small distance between the second stage and the release of the trigger. •Turn set screw No. 1 counter-clockwise after cocking and releasing (approximately 1/8 turn each). The sear engagement of 5/100 mm is obtained after the action is closed. In combination with a minimum trigger weight there might be a malfunction and an increased risk (independent shot release). Please see chapter „Cleaning, maintenance, care, oils“. 21 Important note: To protect your highly accurate trigger and to maintain perfect functioning always close the bolt carefully. Attention: If you change the trigger remove the bolt from the receiver when fitting the trigger as otherwise the trigger will be damaged. 5098 5098 L 5100 D 5100 L D 5103 ● ● 700.6700 5019 ● 700.6710 5021 D 700.6720 800.0000 5021 5024 700.6730 5023 D 700.6660 5020 D 700.6881 5197 ● ● ● ● ● ● ● ● ● ● ● ● 1407, 1407 Z, 1409, 1411 1959 - 1974 1413, 1408 EDS 100 g 100 g 550 g 550 g ● ● ● ● 1607, 1613, 1608 EDS 100 g 100 g 150 g 150 g 550 g 550 g 550 g 550 g 1500 g ● ● ● ● ● ● ● ● ● ● ● 100 g ● 2001 Superair 550 g ● 2001 D-RT Superair 100 g 1500 g ● ● 2002 Superair ● 550 g ● 2002 D-RT Superair ● 550 g ● 2002 D-RT Compr.Air, 1827, 1827F ● 550 g ● 2027 Summer biathlon ● ● ● ● ● ● When you order trigger parts please indicate the order number, type of rifle model together with the trigger model number. For left hand versions please add ”L” 22 143655 to 182155 1807, 1907, 1807 Z, 1907 Z 1907 Silh., 1807 Rep. 1907 Rep., 1907 Rep., 1912 1813, 1913, 1808 EDS starting 1808 D-RT, 1827, 1827F, 2007 starting from from 1979 182156 2007/660, 2012, 2013 2013/690, 2013 Benchrest 54.18 MSR, 1808 MSR 2002 Compressed Air, 2020, 2025 280 g 280 g 500 g 500 g 1500 g ● ● ● 1974-1979 For small bore models serial-no. starting from 700.6800 700.6810 700.6860 700.6870 700.6875 ● For small bore models production years 5018 5018 L 5018 D 5018 L D 5020 5020 L 5020 D 5020 L D 5022 ● ● ● ● ● For models 700.6600 700.6610 700.6620 700.6630 700.6640 700.6650 700.6660 700.6670 700.6740 ● 150 g 500 g 500 g 1500 g Left hand version 5071/1 5071/1 D 5075/1 5075/1 D Single-stage trigger Two-stage trigger 700.6550 700.6560 700.6570 700.6580 ● ● Right hand version Adjustment of the trigger blade: After loosening clamping screw No. 3 the trigger blade can be moved in longitudinal direction. 1407-U9 1408-U1 1408 D-U1 1411-U2 Adjusted to e Model r Order No. t 700.6540 700.6541 700.6542 700.6543 1903, 1416 MSP, 1403 Rep. 64 MSR L D D-RT EDS Rep. Silh. F Z MSP MSR = = = = = = = = = = Left hand version Single-stage trigger Running target Running target Repeater Silhouette Fortner ”Zimmerstutzen” Silhouette pistol Silhouette rifle 23 Adjustment of the butt plate The butt plate is screwed to the butt by two interchangeable wedge-shaped spacers. By adding, removing or reversing individual spacers the angle and/or the height of the butt plate can be modified and adapted to individual requirements. To remove a spacer: •Loosen the screws of the butt plate but do not screw it out completely. •Pull upwards the end of the spacer in which no opening is visible (for example with a thin screw diver). •Now turn the spacer in the same direction around the free end and remove it. When inserting a spacer please proceed vice versa. residues from the barrel to avoid that dirt or oil particles will penetrate the trigger mechanism. Clean with a lint-free cloth or pull cleaning cords several times through the barrel from chamber to muzzle to remove deposits. Subsequently pull a slightly oiled, lint-free cloth or cleaning cords through the barrel to avoid corrosion. •Clean the bolt with a slightly oiled cloth. •Make sure that the metal parts of your rifle are protected against corrosion by a slight oil film. •Remove the oil film with a dry cloth or cleaning cords before you shoot again. Careful cleaning: New rifles up to 10,000 shots in 1,000 shot intervals, subsequently in 5,000 shot intervals at least. Even after considerable use, your ANSCHÜTZ small bore match rifle will not require much attention - a tribute to its solid design, first class materials, well proven ANSCHÜTZ workmanship and precision. If you follow the recommendations below, you will help maintain the excellent performance of your rifle for a long time. •Use oil to clean the barrel and push a brass brush from the chamber to the muzzle. Never move the brush back and forth in the barrel. Only clean in shooting direction. Remove the brush outside of the muzzle and carefully pull the rod back through the barrel. •Then pull cleaning cords in dry condition through the barrel until the last one shows no considerable dirt. •Before shooting the next time fire 5 shots to get back to the former shooting performance. •Clean external parts with a slightly oiled cloth. Regular care after every shooting: Maintenance of the trigger: •Please only use resin and acid free oils. •Use cleaning rod guide No. 4401 (Order No. 710.6340) to remove any •Lubricate the bearings slightly with cold resistant molybdenum disulphide grease once a year. Cleaning, Maintenance, Care, Lubrication 24 •Spot a small amount of oil into the bearing parts using a needle. •The internal parts should not be washed with spray or oil to avoid resin or other residues in the trigger. Accessories Please ask for our catalogue. Attention: When cleaning the rifle no dirt, residues of solvents, grease or non-suitable oils must get into the trigger mechanism. We therefore recommend either to use our cleaning rod guide or to clean your gun in a way that it is horizontal or even with the stock up to avoid any contamination of the trigger mechanism. Protect your rifle against dust, sand, humidity, heat and other harmful influences. Vacuum clean your gun case or soft gun case once a month to remove dust and lint. Gun cases and soft gun cases should have a smooth and dust rejecting inner lining. Be aware that condensed water might occur as a result of temperature variations. In such a case it has to be removed at once. Leave your gun case or soft gun case open when you store them at home so that possible humidity can escape. Adding a humidity absorber reduces the development of humidity. Be aware of other possible changes or damage. In such a case take your rifle to an authorized gunsmith for checking or send it to our factory. To reduce the risk of damage in transit, we recommend the disassembly of the barreled action from the stock. 25 Warranty Copyright A warranty of 2 years will be issued. Parts which are subjected to wear are not part of this warranty. In the case of warranty we substitute the defective parts free of charge. Cases of warranty will only be accepted if the article in question and the corresponding purchase receipt plus filled-in warranty card are presented. Warranty will not be accepted if changes or repair works have been carried out by persons who are not authorised, if the rifle is not used correctly or if non-ANSCHÜTZ original parts were used. Product specifications, design and model changes are subject to change without prior notice. Dimensions and colors are subject to change. With reservation of misprints and errors. Goods are subject to prior sale. Delivery subject to the presentation of the referring license for the purchase of firearms. We wish you much pleasure and success with your ANSCHÜTZ product and would be pleased if you could let us have your ideas on our products and the design of this instruction leaflet. 26 ANSCHÜTZ, the ANSCHÜTZ logo and the ANSCHÜTZ logo in connection with the slogan „Die Meister Macher“ (also in modified spelling) are protected brands of J.G. ANSCHÜTZ GmbH & Co. KG, Ulm, Germany. The unauthorized use of this brand name is not allowed and punishable. All rights of this instruction leaflet reserved. The use of the instruction leaflet, also in excerpts, is not allowed without the permission of J.G. ANSCHÜTZ GmbH & Co. KG and otherwise is punishable. This is especially applicable for unauthorized copying, translations and read-ins in electronic systems. 27 <<<>>> Dieser Artikel wurde zum Verkauf freigegeben, nachdem er selbst, seine Materialien und Einzelteile strenge Konrollen durchlaufen haben, oder das Gewehr beim Beschuss seine Haltbarkeit und Funktion unter Beweis gestellt hat. Wir übernehmen für zwei Jahre volle Garantie auf Material- oder Bearbeitungsfehler (ausgenommen Schaft- und Federbrüche), sofern ein Mangel nachweisbar bereits im Zeitpunkt der Übergabe des Artikels vorlag. Für Mängel, die auf unsachgemäße Behandlung oder auf Reparaturen zurückzuführen sind, stehen wir nicht ein. Die Garantieleistung steht in unserer Wahl in Nachbesserung oder Neulieferung. Schadensersatzansprüche – aus welchem Rechtsgrund auch immer geltend gemacht – sind ausgeschlossen. Wir bitten, diese Karte – von Ihrem Waffenfachgeschäft ausgefüllt und unterschrieben – mit dem Artikel an uns einzusenden. J.G. ANSCHÜTZ GmbH & Co. KG · Jagd- und Sportwaffenfarbrik Postfach 1128 · D-89001 Ulm/Germany · www.anschuetz-sport.com 39 Stempel und Unterschrift des Fachhändlers stamp of dealer / timbre du détaillant 38 ✄ Notizen / Notes FABRIKATIONS-NR.: Serial-No. / Numéro de série: DATUM DES VERKAUFS: Date / Date d‘achat: GEKAUFT BEI: This item was bought from / Détaillant: ✄ 40 <<< >>> After throrough testing of materials and finished parts this item has passed a rigid final inspection as well as proof testing or test shooting. If, despite these precautions, there is any failure due to defective materials or workmanship (except brocken stocks and springs) within two years the necessary repairs will be carried out without charge, in so far as the item was evidently defective at the time of purchase. No claims under warranty can be accepted if the item has been subjected to improper use or unauthorized repair. The item will be either repaired or replaced at our discretion. Claims for compensation – put forward for any legal cause whatsoever – are excluded. This warranty card – completed and stamped by your dealer – must be returned with the item for repairs. J.G. ANSCHÜTZ GmbH & Co. KG · Jagd- und Sportwaffenfarbrik Postfach 1128 · D-89001 Ulm/Germany · www.anschuetz-sport.com <<< >>> Cet article n‘a été mis en vente qu‘après une vérification minutieuse des pièces et matières à tous les stades de la fabrication ou après avoir subi un contrôle de fiabilité et de bon fonctionnement au banc d‘épreuve. Nous la garantissons pendant deux ans contre tout défaut de matière ou vice de fabrication (sauf contre les bris de crosse ou de ressorts) dans la mesure ou il peut être prouvé qu‘un défaut éxistait déjà au moment de l‘achat de l‘article. Nous ne répondons pas des défauts résultant d‘une utilisation incorrecte ou de réparations. Nous nous réservons d‘exécuter la garantie soit par remise en état soit par échange. Les demandes en dommages-intérêts sont irrecevables quelle que soit la cause mise en avant. Veuillez faire remplir et signer cette carte par votre armurier et nous l‘adresser avec l‘article. J.G. ANSCHÜTZ GmbH & Co. KG · Jagd- und Sportwaffenfarbrik Postfach 1128 · D-89001 Ulm/Germany · www.anschuetz-sport.com Notizen / Notes 41 04/02 Bedienungsanleitung Fabr.-Nr.: Serial No.:.......................................................................... Instruction Leaflet Bitte hier eintragen · Please fill in here Originalschussbild Ihres Gewehres 10 Schuss auf 50 m Original group of your rifle 10 shots at 50 m KK-Matchgewehre Small Bore Target Rifles J.G. ANSCHÜTZ GmbH & Co. KG Jagd- und Sportwaffenfabrik Daimlerstrasse 12 D-89079 Ulm / GERMANY Postfach 11 28 D-89001 Ulm / GERMANY Telefon (++49)-(0)-731-4012-0 Telefax (++49)-(0)-731-4012-700 anschuetz-sport.com JGA-Info@anschuetz-sport.com DGG · 04/02/2.500 Mod. 1903 / 1903 D · 1903 L / 1903 LD Bitte sorgfältig lesen, bevor Sie dieses Gewehr zusammenbauen oder benutzen. Please read carefully before you assemble or operate this rifle.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Create Date : 2002:04:17 13:25:26 Producer : Acrobat Distiller 4.0 for Macintosh Modify Date : 2004:10:05 10:53:52+02:00 Page Count : 13EXIF Metadata provided by EXIF.tools