223062 AOSRG45300

User Manual: AOSRG45300

Open the PDF directly: View PDF PDF.
Page Count: 2

PROMAX PLUS HIGH EFFICIENCY FEATURES
ENERGY-EFFICIENT DESIGNS
2"-thick CFC-free foam insulation, external heat traps and other
energy-saving features meet minimum .62 Energy Factor which qualifies for
ENERGY STAR® programs.
6-YEAR LIMITED TANK AND PARTS WARRANTY
For complete information, consult written warranty or A. O. Smith Water
Products Company.
A. O. SMITH DYNACLEAN™ DIFFUSER DIP TUBE
Helps reduce lime and sediment buildup, maximizes hot water output. Made from
long-lasting PEX cross-linked polymer.
GREEN CHOICE® GAS BURNER
Patented “Eco-Friendly” design reduces NOx emissions by up to 33% and complies with
less than 40 ng/j requirements for low NOx.
COREGARD™ ANODE ROD
An A. O. Smith exclusive. Aluminum anode has stainless steel core, protects tank
against corrosion longer than ordinary anodes.
PUSH-BUTTON PIEZO IGNITOR
Makes lighting pilot fast and easy with one-hand push-button spark ignition.
Standard on C3 Technology™ models.
DURABLE TAMPER-RESISTANT BRASS DRAIN VALVE
A. O. SMITH PERMAGLAS®GLASS COATING
Protects steel tank from corrosion.
CSA CERTIFIED AND ASME RATED T&P RELIEF VALVE
Top-mounted T&P Relief Valve as option on all models.
CODE COMPLIANCE: UBC, CEC, SBCC, CABO, HUD,
BOCA NATIONAL CODES, ASHRAE/IESNA 90.1 CURRENT EDITION AND
2004 NAECA
DESIGN-CERTIFIED BY CSA INTERNATIONAL
According to ANS Z21.10.1 - CSA 4.1 Standards governing storage-type water heaters.
See other side.
HIGH EFFICIENC Y
PLUS
+
Residential Gas Water Heaters
April 2011R
EQUIPPED WITH C3 TECHNOLOGY
AOSRG45300
Page 1 of 2
SERIES 100/101
®
®
Residential Gas Water Heaters
BA
F
D
1/2" GAS
CONNECTION
T&P VALVE
HOT CONNECTION
COLD
CONNECTION
ANODE ROD*
C
E
*Location for optional top-mounted
T&P Valve if ordered from factory.
Corderite Combustion Containment (C3) design meets American National
Standards Institute standards (ANS Z21.10.1 - CSA 4.1 Standards) that deal with the
accidental or unintended ignition of flammable vapors, such as those emitted by gasoline.
Covered by four U.S. patents, C3 Technology gas water heaters feature a sealed
combustion chamber with air intake screen and a fireproof Corderite flame
arrestor built into the water heater base. In addition, a thermal cutoff (TCO)
device, integral with the thermocouple, is designed to shut off gas flow to the
burner and pilot if poor combustion is detected.
Flammable Vapor Ignition
Resistant C3 Technology
Water Heaters
If flammable vapors
accidentally enter the
combustion chamber,
the Corderite flame
arrestor is designed
so flames burn off
the top surface and
cannot escape down
through the arrestor.
A. Easy-to-light
piezo ignitor
B. View port for easy
burner inspection
inside sealed
combustion chamber
Recovery capacity based on actual performance tests.
Water Connections – 3⁄4" on all models.
† Propane Gas – 37,000 BTU input on all models.
For 10-Year Tank and 6-Year Parts Warranty, change “G” to “X” in Model Number (example: X VR-30).
A
B
Page 2 of 2
www.hotwater.com
For Technical Information and Automated Fax Service, call 800-527-1953. A. O. Smith Corporation reserves the right to make product changes or improvements without prior notice.
AOSRG45300
April 2011R
SERIES
FIRST
HOUR
RATING
GALLONS
ENERGY
FACTOR
GAL.
CAP.
BTU
INPUT
PER HOUR
NATURAL
RECOVERY
90ºF RISE
GALLONS
PER HOUR
R
VALUE A B C D E F
DRAFT
HOOD
OUTLET
APPROX.
SHIPPING
WEIGHT
(LBS)
100/101 66 .63 30 40,000 41 16 62-3/8 58 18 13-3/8 851-7/8 3 or 4 126
100/101 71 .62 40 40,000 41 16 59-7/8 55-1/2 20-1/2 13-3/8 848-7/8 3 or 4 137
100/101 80 .62 50 40,000 41 16 60-7/8 56-1/2 22 13-3/8 850-3/8 3 or 4 172
DIMENSIONS IN INCHES
MODEL
NUMBER
GVR-30
GVR-40
GVR-50
SERIES 100/101
®

Navigation menu