BC HX5 Product Guide 03 10 Cd537190 Cfdd 429d 84a7 Bd4105a8628c

User Manual: HX5

Open the PDF directly: View PDF .
Page Count: 19

Download
Open PDF In Browser	View PDF

Optimized for virtualization and database applications with maximum
memory and compute capacity in a blade

Product Guide
March 2010

IBM BladeCenter HX5
Scalable 2-to-4-socket blade server optimized for
virtualization/consolidation, database, and ERP

Product Overview

Suggested uses: Front-end and mid-tier applications requiring high performance (CPU, memory
or I/O), enterprise-class availability, and extreme flexibility and power efficiency.
CONTENTS
Product Overview

Selling Features

Key Features

Key Options

HX5 Images

HX5 Specifications

The Bottom Line

Server Comparison

For More Information

Legal Information

IBM® has been designing and implementing chipsets under the X-Architecture® name since
2001. eX5 technology represents the fifth generation of products based on the same design
principle IBM began with in 1997: to offer Intel® Xeon® processor-based systems that are
expandable, offer “big iron” reliability, availability, and serviceability (RAS) features, with
extremely competitive price/performance.
The eX5 technology is primarily designed around three major workloads: database servers,
server consolidation using virtualization services, and Enterprise Resource Planning (application
and database) servers.
If you’re using industry-standard servers to run business critical applications, the systems that
run these applications need the type of technology designed into IBM’s eX5 technology systems.
The eX5 chipset represents a $100M+ investment in designing a flagship offering that can
harness the power of 4-socket-and-up 64-bit x86 (x64) Xeon processors. The eX5 family
includes a scalable performance blade server with the ability to scale from a single-wide blade
(30mm) to a double-wide blade (60mm). Maybe you’d like to start out with a 2-socket blade and
possibly add sockets later, if your needs change. Or perhaps you need more than a 2-socket
blade, but don’t want to get locked into a monolithic 4-socket blade—again, in case your
requirements change. With IBM, you can start at 2 sockets and grow to 4 if needed. And if you
require a variety of 2- and 4-socket servers in your data center, you only have to qualify one
server for all these workloads. This can save much time and effort and speed deployment. You
can also save money on software licensing by virtualizing a 4-processor server into many VMs,
rather than using multiple 2-processor servers. Huge amounts of memory also enable more or
larger VMs, and larger databases (especially databases stored entirely in memory).
Reducing an entire server into a little over .5U of rack space (i.e., up to 14 servers in 9U) does
not mean trading away features and capabilities for smaller size. The IBM BladeCenter® HX5
blade server offers features comparable to many 1U rack-optimized full-featured servers, and
then some: The HX5 supports up to two of the latest high-performance 8-core, 6-core, or 4-core
Intel Xeon 7500 and 6500 Series processors. The Xeon processors are designed with up to
24MB of shared cache and leading-edge memory performance (up to 978MHz, depending on
processor model) to help provide the computing power you require to match your business
needs and growth. In addition, the HX5 supports up to 128B of registered double data rate III
(DDR3) ECC (Error Checking and Correcting) memory in 16 DIMM slots, with multiple levels of
IBM Active Memory™ protection, for the highest levels of performance and availability. Active
Memory protection includes IBM Memory ProteXion™, IBM Chipkill™ memory, memory
scrubbing, memory rank sparing, and memory mirroring.
Because business requirements change and a 2-socket server that meets those needs today
may not meet them in the future, the HX5 was designed to be upgradeable to meet the diverse
needs of multiple workloads. For compute-intensive workloads, it can be configured as a 2wide blade server with up to 4 processors / 32 cores, 32 DIMMs (256GB), 4 PCIe cards, 16 I/O
ports, and 4 solid-state drives (SSDs). Conversely, for memory-intensive workloads, the
HX5 can be configured as a 4-wide server consisting of 2 blade servers and 2 MAX5 memory
expansion blades, with up to 4 processors / 32 cores, 80 DIMMs (640GB), 4 PCIe cards, 16
I/O ports, and 4 SSDs. IBM FlexNode partitioning allows a physical 4-blade configuration to be
remotely reconfigured by software into two logical 2-socket servers, as needs change or for daily
peak and off-peak workloads.
The HX5 supports VMware ESXi preloaded on a standard USB flash drive. It operates in a
diskless configuration, offers a smaller memory footprint, extremely high performance, and
stronger security, making getting a system up and running in a virtualized environment faster and
easier than ever before.

Please see the Legal Information section for important notices and information.

Optimized for virtualization and database applications with maximum
memory and compute capacity in a blade

IBM’s eX5 technology-based systems are the ideal solution for scale-up database-serving
applications on Microsoft® Windows® with Microsoft SQL Server® or IBM DB2®, as well as Linux®
with Oracle or DB2. Database hosting demands ultimate server reliability features, and once
installed, they tend to grow and grow, requiring ever greater levels of availability. eX5 servers
provide exactly that degree to availability.
Another strong application area for the eX5-based systems is enterprise server consolidation
activities workloads, including SAP and Oracle. eX5 systems can offer considerable savings over
UNIX deployments, using our certified solution stacks on either Windows or Linux.. Larger
servers need more processor, memory and I/O resources, which make maximum use of any
applicable virtual machine software licensing fees and deliver superior system utilization levels.
The name of the game in consolidation activities is to deploy the fewest new servers possible
and help IT staff manage more images with the same or fewer overall people.
An integrated dual-port Gigabit Ethernet1 controller is standard, providing high-speed data
transfers and offering TOE (TCP Offload Engine) support, load-balancing and failover
capabilities. Via optional expansion cards, each blade can also connect to additional Ethernet,
10Gb Ethernet, SAS, Fibre Channel, iSCSI, InfiniBand™, and other high-speed communication
switches housed in the chassis. This blade is designed with power management capability to
provide the maximum uptime possible for your systems. In extended thermal conditions or power
brownouts, rather than shut down completely, or fail, the HX5 automatically reduces the
processor frequency to maintain acceptable thermal and power levels.
All HX5 models offer impressive features at an equally impressive price, including up to two 1.8inch fixed solid-state drives (SSDs) with RAID-0/1 support, and one optional internal USB
flash drive (for embedded hypervisor]. Additional direct-attach storage is available via the
BladeCenter S chassis. Moreover, the HX5 is optimized for diskless operation, offering each
blade server access to essentially unlimited external storage capacity via Fibre Channel, SAS, or
iSCSI.
A single BladeCenter H chassis supports up to 14 hot-swappable 30mm-wide HX5 blades in
only 9U (BladeCenter H) of rack space, or up to 12 in the 12U BladeCenter HT high-speed
telecommunications chassis. In addition to the blade servers, these chassis also hold up to 10
(BladeCenter H) or 8 switches/bridges (BladeCenter HT) internally. The BladeCenter S,
designed for SMB and mid-market customers, takes integration and affordability to a new level,
combining up to 12 hot-swap SAS/SATA HDDs (with optional SAS card) and up to 6 blade
servers and 4 switches. Not only can this save significant data center space (and therefore the
cost of floor space and rack hardware) compared to 1U servers, it also consolidates
switches/bridges and cables for reduced complexity and lower cabling costs, and it allows clients
to manage everything in the solution as one. Using a BladeCenter H chassis, up to 56 HX5
servers (112 processors/896 cores) can be installed in one industry-standard 42U rack; but the
value of BladeCenter extends far beyond high density data center environments.
The various BladeCenter chassis are designed to monitor environmental conditions in the
chassis and each blade and send alerts to the administrator. Advanced standard features, such
as Active Memory, Predictive Failure Analysis, light path diagnostics, hot-swap redundant
SSDs and HDDs, power supplies and blower modules with Calibrated Vectored Cooling™;
IPMI 2.0 support, including highly secure remote power control; text-console redirect over
LAN, next-generation BIOS (UEFI), an Advanced Management Module (upgradeable with a
redundant AMM), IBM Systems Director management software including IBM Systems
Director Active Energy Manager™. Remote Deployment Manager and IBM ServerGuide™
help maintain system availability with increased uptime.
If you need scalable, highly manageable, high-performance virtualization in a space- or powerconstrained environment, the HX5 is the ideal system.

Selling Features

Price/Performance
• There is an HX5 model to fit all budgets. The HX5 offers a choice of high-performance 4-, 6-, and 8core Xeon processors with dual integrated memory controllers, clock rates of 1.86GHz or 2.0GHz,
and 12MB, 18MB or 24MB of integrated Level 3 cache. Xeon 7500 series processors offer up to 3X
better performance2 than the previous-generation 7400 series processors and up to 10X better
performance than the single-core processors of a few years ago that you may still be using.
• Up to 128GB of registered DDR3 ECC memory per blade operates at 800MHz to 978MHz
(depending on the system configuration), for high performance and wide memory bandwidth.
• By scaling to 2 blades, the HX5 can support up to 256GB of memory—enough for even the most
demanding virtualization, database, or ERP needs.
• Embedded virtualization (optional on all models) offers extremely high performance, enhanced

Actual data transfer speed will vary and is often less than the maximum possible. Gigabit Ethernet transfer speed requires support on both
system and server, and appropriate network infrastructure.
2
Based on Intel measurements.

Please see the Legal Information section for important notices and information.

Optimized for virtualization and database applications with maximum
memory and compute capacity in a blade
security, and a zero-gigabyte HDD footprint. (In other words, no mechanical HDD to fail.)
• Solid state drives (SDDs) use only 2W of energy per drive, vs. 9-10W for 2.5-inch HDDs. This is as
much as 80% less energy than a HDD would use (with a corresponding reduction in heat output).
• The extremely high degree of integration in the various BladeCenter chassis reduces the need for
server components, replacing numerous fans, KVM and Ethernet cables, power supplies, external
switches and other components with fewer shared hot-swap/redundant components in the
BladeCenter chassis itself. This integration also can greatly reduce the amount of power
consumed and heat produced, relative to an equivalent number of 1U servers. This can
significantly reduce a data center power bill. The reduced data center footprint can also save on
infrastructure cost.
• The midplanes used in all chassis provide high-speed blade-to-blade, blade-to-switch-module
and module-to-module communications internally as well as externally. The midplanes used in
the BladeCenter H and BladeCenter HT chassis provide four 10Gb data channels to each blade,
and supports high-speed switch modules, including 4X InfiniBand and 10Gb Ethernet.
• The various BladeCenter chassis use ultrahigh efficiency power supplies. Most industry-standard
servers use power supplies that are between 70-75% efficient at converting power from AC wall
current to the DC power used inside servers. BladeCenter power modules are up to 92% efficient.
This helps save even more money, as more of the power input you are paying for is used for
processing, rather than released into the data center as waste heat that requires even more energy
to cool.
• BladeCenter design also reduces the number of parts required to run the system. Sharing fans,
systems management, and optical media means fewer parts to buy and maintain, and fewer items
that can fail and bring the overall solution down.

Flexibility
The HX5 has the ability to grow with your application requirements, thanks to:
• Up to two multi-core Xeon processors (up to 16 cores) per HX5 blade server; up to 2 blades (4
processors, 32 cores) per server.
• The ability to grow from a single-wide 2-socket server blade to a double-wide 4-socket server
configuration, optimized for compute-intensive workloads with up to 4 processors/32 cores,
256GB of memory, 4 PCIe cards, 16 I/O ports, and 4 SSDs), or for memory-intensive workloads
with up to 2 server blades and two MAX5 memory expansion blades (4 processors/32 cores, 640GB
of memory, 4 PCIe cards, 16 I/O ports, and 4 SSDs).
• A choice of processor speeds (1.86 or 2.0GHz), and shared L3 cache sizes (12MB, 18MB, or
24MB).
• Up to 128GB of system memory in 16 DIMM slots. Using multiple blade servers and MAX5 memory
expansion blades, the HX5 can support up to 256GB (2 server blades), 320GB (1 HX5 and 1
MAX5), or 640GB (2 HX5 servers and 2 MAX5 blades).
• Up to two internal hot-swap 1.8-inch solid state drives, and access to terabytes of external storage
via the BladeCenter S chassis or IBM System Storage™ SAN and NAS storage devices. SSDs
consume only 10-20% of the energy required by 2.5-inch HDDs.
• Two Gigabit Ethernet ports standard, plus optional 2-port or 4-port expansion cards or a
BladeCenter PCI Express I/O Expansion Unit 3. One HX5 model includes a 10Gb expansion card
(optional in the other models).
In addition, the various BladeCenter chassis offer a high degree of flexibility:
• They support configurations that are 30mm or 60mm wide, with a variety of I/O options, depending
on need.
• When installed in a BladeCenter H high-speed switch bay, the optional Multi-Switch Interconnect
Module doubles the number of Gigabit Ethernet and Fibre Channel connections to every blade in
the chassis (up to 8 or 12 ports, depending on the blade server).
• Xeon processor-based HX5 blades can be used in the same chassis as Intel processor-based
HC10, HS12, HS20, HS21, HS21 XM, HS22, HS22V, and HS40 blades; AMD Opteron processorbased LS20, LS21, LS22, LS41 and LS42 blades; IBM PowerPC® processor-based JS12, JS20,
JS21, JS22, and JS23 blades; Cell Broadband Engine™ processor-based QS21 and IBM
PowerXCell™ processor-based QS22 blades. Depending on the blade servers used, the various
BladeCenter chassis support Microsoft Windows, Linux, Novell Netware, IBM AIX® and Sun
Solaris 10 operating systems in the same chassis.
• Most HS/LS/JS/QS blade servers ever released by IBM are supported in every BladeCenter chassis
ever released, going back to 20023. Every switch module released by IBM is equally compatible.
(Ask HP and Dell how far back their compatibility goes.)

Some older chassis may require power module and management module upgrades.

Please see the Legal Information section for important notices and information.

Optimized for virtualization and database applications with maximum
memory and compute capacity in a blade
• A blade server has access to as many as 10 communication switches/bridges in a BladeCenter
H or 8 in a BladeCenter HT chassis. (Up to 4 switches in a BladeCenter E, S, or T chassis.) And the
switches can be Ethernet, iSCSI, SAS, InfiniBand, Fibre Channel, or anything else designed and
ServerProven® for BladeCenter use. Switches, bridges and interface cards are currently available
from such vendors as Brocade, Cisco, Intel, McData, Nortel, QLogic, Cisco Topspin and others, in
addition to IBM.

Manageability
• The HX5 blade server includes an Integrated Management Module (IMM) to monitor server
availability, perform Predictive Failure Analysis, etc., and trigger IBM Systems Director alerts. The
IMM performs the functions of both the Baseboard Management Controller (BMC) of earlier
systems, and the Remote Supervisor Adapter II, as well as remote presence/cKVM.
• Each BladeCenter chassis includes an Advanced Management Module to provide additional
systems management capabilities, including Web-based out-of-band control; virtual floppy and CDROM support; latest OS failure screen capture; LDAP and SSL support; and remote redirection of
video, text, keyboard and mouse.
• Integrated industry-standard Unified Extensible Firmware Interface (UEFI) next-generation BIOS.
New capabilities include:
Human readable event logs – no more beep codes
Complete setup solution by allowing adapter configuration function to be moved into UEFI
Complete out-of-band coverage by the Advance Settings Utility to simplify remote setup
• Integrated industry-standard IPMI 2.0 support works with the IMM to alert IBM Systems Director to
anomalous environmental factors, such as voltage and thermal conditions. It also supports highly
secure remote power control.
• Integrated Trusted Platform Module (TPM) provides a highly secure start-up process from poweron through hand-off to the operating system boot loader. ACPI support is provided to allow ACPIenabled operating systems to access the security features of this module. (TCG V1.2-compliant.)
• IBM Systems Director Active Energy Manager, an IBM-exclusive, is designed to take
advantage of new system power management features, by monitoring actual power usage and
providing power consumption capping features. More accurate power usage data helps with data
center construction planning and the sizing of power and cooling needs, as well as allowing you to
use available power more efficiently.
• The HX5 supports remote presence/concurrent KVM (cKVM) and concurrent media (cMedia)
access by multiple administrators at once, via the IMM.
• IBM Systems Director is included for proactive systems management and works with both the
blade’s internal IMM and the chassis’ management module. It comes with a portfolio of tools,
including IBM Systems Director Active Energy Manager, Service and Support Manager, and
others. In addition, IBM Systems Director offers extended systems management tools for additional
server management and increased availability. When a problem is encountered, IBM Systems
Director can issue administrator alerts via e-mail, pager, and other methods.

Availability and Serviceability
• BladeCenter chassis are designed for operation with greatly reduced potential for single points
of failure. Most aspects of operation, from blade servers to communication modules, to
management modules, to power and blower modules, are hot-swappable. The midplane
connections are redundant and the other features can be made so, when used in pairs.
• Fast PC3-10600 DDR3 ECC memory offers multiple layers of Active Memory protection, including
Chipkill error correction, Memory ProteXion (redundant bit steering), memory scrubbing, memory
rank sparing, and memory mirroring for high availability
• HX5 blade servers support the use of Chipkill-enabled ECC (error checking and correcting)
memory. Chipkill memory can be up to 16X better than standard ECC memory at correcting some
types of memory errors. This can help reduce downtime caused by memory errors.
• Solid-state drives offer up to triple the availability (MTBF rates) of conventional SAS HDDs. This
can lessen the need for redundant drives.
• IPMI 2.0 supports highly secure remote system power on/off using data encryption. This allows an
administrator to restart a server without having to visit it in person, saving travel time and getting the
server back up and running quickly and securely.
• Environmentally tuned blower modules in the chassis adjust to compensate for changing thermal
characteristics. At the lower speeds they draw less power and suffer less wear. Equally important in
a crowded data center, temperature-controlled blowers produce less ambient noise in the data
center than if they were constantly running at full speed.
• Text and graphics console redirection support allows the administrator to remotely view HX5 text

Please see the Legal Information section for important notices and information.

Optimized for virtualization and database applications with maximum
memory and compute capacity in a blade
and graphic messages over serial or LAN connections.
• A standard three-year (parts and labor) limited onsite warranty4 affords you peace of mind and
greater potential investment protection.

Right, Open, Easy, Green
You need to make IT decisions that will drive business success. You face management challenges and
technological complexity such as space constraints, power and cooling limitations, heterogeneous
environments and I/O connectivity issues. IBM brings together the widest choice of compatible chassis,
blade servers, storage and networking offerings and solution providers in the industry to help you build
an open and flexible IT environment. And regardless of the size of your business, you want to be up and
running 24/7. With built-in redundancy, innovative power and cooling and the latest I/O and
management tools, IBM BladeCenter is easy to own—so you can focus on your business demands and
stay ahead of the competition.
The RIGHT choice, tailored to fit your diverse needs:
• It’s flexible and modular. As needs evolve, a one-size-fits-all solution doesn’t work.
–

Meet your needs with BladeCenter: everything from a high-performance data center to a small
office with limited IT skills—IBM has you covered

–

Get flexibility with 5 compatible chassis and 5 blade types supporting multiple I/O fabrics, all
managed from a common point

• It’s robust and reliable, providing redundancy throughout and the information you need to keep your
business up and running.
–

Provide redundancy for no single point of failure with IBM BladeCenter

–

Preserve application uptime with IBM Predictive Failure Analysis and light path diagnostics

–

Make decisions based on accurate data for quick problem diagnosis with First Failure Data
Capture

OPEN and innovative, for a flexible business foundation:
• It’s comprehensive, providing broad, fast, and reliable networking and storage I/O with BladeCenter
Open Fabric.
–

Match your data center needs and the appropriate interconnect using a common management
point, and 5 I/O fabrics to choose from

–

Extract the most from your third-party management solutions by utilizing the BladeCenter Open
Fabric Manager

• It’s collaborative, enabling you to harness the power of the industry to deliver innovation that matters.
–

Get flexibility from a myriad of solutions created by Blade.org members and industry leaders
that have downloaded our open specification
EASY to deploy, integrate and manage:
• It enables efficient integrated management, which allows you to minimize costs with the tools you
need for effective management.
–

Automate OS installation and BIOS updates remotely with IBM Systems Director tools

–

Administer your blades at the chassis or rack level with the Advanced Management Module

–

Plug into your enterprise management software

• It enable deployment simplicity without tradeoffs by speeding the deployment of new hardware in
minutes rather than days, using BladeCenter Open Fabric Manager
–

Get significantly faster deployment of servers and I/O than from rack solutions

–

Reduce costly downtime with integrated failover capability

–

Manage from a single point of control via the Advanced Management Module

–
Use with virtually all IBM switches, blades and chassis
GREEN today for a better tomorrow:
• It offers control via powerful tools that help you optimize your data center infrastructure so you can be
responsive.

–

Understand your power requirements with IBM Power Configurator

–

Monitor, control and virtualize your power with IBM Systems Director Active Energy Manager

–

Reduce data center hot spots with the IBM Rear Door Heat eXchanger

–

Optimize and future-proof your data center with IBM Data Center Energy Efficiency services

For terms and conditions or copies of the IBM Statement of Limited Warranty, call 800-772-2227 in the U.S. In Canada call 800-426-2255.
Telephone support may be subject to additional charges. For warranties including onsite labor, a technician is sent after IBM attempts to
resolve the problem remotely. International warranty service is available in any country in which this product is sold.

Please see the Legal Information section for important notices and information.

Optimized for virtualization and database applications with maximum
memory and compute capacity in a blade
• Our eco-friendly servers and services can help you be environmentally responsible.
• Become more energy efficient with IBM expertise

Key Features

Multicore Intel Xeon Processors
The HX5 ships with 1 or 2 high-performance Intel Xeon 7500 or 6500 Series processors per
blade. By connecting 2 blades together, the HX5 servers also go a step further by allowing you to
increase the number of sockets from 2 to as many as 4. The choice of processors includes:
• 95W eight-core Xeon processor model L7555 at 1.86GHz, with 64-bit extensions, extremely low
power draw per core (11.9W), 978MHz memory access, 5.86 GTps QPI speed, dual integrated
memory controllers, and 24MB of shared L3 cache
• 105W six-core Xeon processor model E7540 at 2.0GHz, with 64-bit extensions, low power draw per
core (17.5W), 978MHz memory access, 6.4 GTps QPI speed, dual integrated memory controllers,
and 18MB of shared L3 cache
• 105W six-core Xeon processor model E7530* at 1.86GHz, with 64-bit extensions, low power draw
per core (17.5W), 978MHz memory access, 5.86 GTps QPI speed, dual integrated memory
controllers, and 12MB of shared L3 cache
• 95W four-core Xeon processor model E7520* at 1.86GHz, with 64-bit extensions, reduced power
draw per core (23.75W), 800MHz memory access, 4.8 GTps QPI speed, dual integrated memory
controllers, and 18MB of shared L3 cache
• 105W four-core Xeon processor model E6510* at 1.73GHz, with 64-bit extensions, reduced power
draw per core (26.25W), 800MHz memory access, 4.8 GTps QPI speed, dual integrated memory
controllers, and 12MB of shared L3 cache (available via CTO)
* This processor is limited to single-chassis configurations.
Note: Because of the integrated memory controllers the former front-side bus (FSB) no longer
exists.
With the Xeon 7500 series processors, Intel has diverged from its traditional Symmetric
Multiprocessing (SMP) architecture to a Non-Uniform Memory Access (NUMA) architecture. The
Xeon 7500 processors are connected through three serial coherency links called QuickPath
Interconnect (QPI). QPI is capable of up to 6.4GTps (gigatransfers per second), depending on
the processor model.
The 4-core Xeon processors contain 4 complete processor cores and 8 threads. Each
processor contains one L3 cache, shared by all the cores. The cores appear to software as
separate physical processors. Four-core processors can offer more than double the performance
of a same-speed 2-core Xeon processor (depending on workload). Similarly, 8-core Xeon
processors contain 8 processor cores and 16 threads. They can offer more than double the
performance of four-core Xeon processors (again, depending on workload). Likewise, the sixcore processors contain six processor cores.
Each processor includes two integrated memory controllers, to reduce memory bottlenecks and
improve performance.
Intelligent Power Capability powers individual processor elements on and off as needed, to
reduce power draw.
Intel’s Virtualization Technology (VT) integrates hardware-level virtualization hooks that allow
operating system vendors to better utilize the hardware for virtualization workloads.

DDR3 Registered Memory with Active Memory Protection
The HX5 uses registered double data rate III (DDR3) VLP (very-low-profile) DIMMs and provides Active
Memory features, including advanced Chipkill memory protection, for up to 16X better error correction
than standard ECC memory. In addition to offering triple the memory bandwidth of DDR2 or fullybuffered memory, DDR-3 memory also uses less energy. DDR2 memory already offered up to 37% lower
energy use than fully buffered memory. Now, a generation later, DDR3 memory is even more efficient,
using 10-15% less energy than DDR2 memory.
The HX5 supports up to 128GB of memory in 16 DIMM slots. Redesign in the architecture of the Xeon
7500 series processors bring radical changes in the way memory works in these servers. For example, the
7500 series processors integrate 2 memory controllers inside each processor, resulting in four
memory controllers in a two-socket system. Each memory controller has four memory channels, one per
pair of DIMMs. Depending on the type of memory, population of memory, and processor model, the
memory may be clocked at 978MHz or 800MHz.
Redesign in the architecture of the x7500 series processors bring radical changes in the way memory
works in these servers. For example, the Xeon 7500 series processors integrate two memory
controllers inside each processor, resulting in four memory controllers in a two-socket system. Each
processor has four memory channels.
Note: If only one processor is installed, only eight DIMM slots (up to 64GB) can be used. There are two

Please see the Legal Information section for important notices and information.

Optimized for virtualization and database applications with maximum
memory and compute capacity in a blade
ways to expand memory beyond 8 DIMMs. Adding a second processor not only doubles the amount of
memory available for use, but also doubles the number of memory controllers, thus doubling the system
memory bandwidth. If you add a second processor, but no additional memory for the second processor,
the second processor has to access the memory from the first processor “remotely,” resulting in longer
latencies and lower performance. The latency to access remote memory is almost 75% higher than local
memory access. So, the goal should be to always populate both processors with memory.
Alternatively, you can add a MAX5 memory expansion blade, containing 24 more DIMM slots with up to
192GB of memory. This offers up to 32 DIMMs and 256GB of memory with only a single processor.
Adding the second processor allows the use of 8 more DIMM slots inside the HX5 and a grand total of 40
DIMMs and 320GB of memory in a double-wide (60mm) blade server. Expanding further, 2 HX5 server
blades and 2 MAX5 memory blades can create one 4-socket, 640GB powerhouse in a 4-wide blade
server.

Mill
Brook 4

Mill
Brook 2
SMI 4

Memory
Controller-3
24MB L3 Cache

Mill
Brook 3

SMI 5

SMI 6

SMI 7

SMI 8

Memory
Controller-4
QPI

Mill
Brook 5

Memory
Controller-2

Mill
Brook 1

SMI 1

Mill
Brook 6

SMI 2

Mill
Brook 7

SMI 3

Mill
Brook 8

Memory
Controller-1
24MB L3 Cache

QPI

QPI (x4)
Co
re
8

Co Co
re re
7
6

Co
re
5

Co Co
re re
4
3

Co
re
2

Co
re
1

Co Co
re re
8
7

Co Co Co
re re re
6
5
4

Co Co
re re
3
2

Co
re
1

Notes: DIMMs must be installed in matching pairs. Also, each CPU requires at least 2 DIMMs. It is
important to ensure that all memory channels in each processor are populated. The relative memory
bandwidth decreases as the number of channels populated decreases. This is because the bandwidth of
all the memory channels is utilized to support the capability of the processor. So, as the channels are
decreased, the burden to support the requisite bandwidth is increased on the remaining channels, causing
them to become a bottleneck.
For peak performance:
• Always populate processors with equal amounts of memory to enable a balanced NUMA system
• Always populate both memory channels on each processor with equal memory capacity
• Ensure an even number of ranks are populated per channel
Power guidelines:
• Fewer larger DIMMs (for example 8 x 4GB DIMMs vs. 16 x 2GB DIMMs will generally have lower power
requirements
• x8 DIMMs (x8 data width of rank) will generally draw less power than equivalently sized x4 DIMMs
Reliability guidelines:
• Using fewer, larger DIMMs (for example 8 x 4 GB DIMMs vs. 16 x 2GB DIMMs is generally more reliable
• Xeon 7500 Series memory controllers support IBM Chipkill memory protection technology with x4 DIMMs (x4
data width of rank) and x8 DIMMs
For increased availability beyond Chipkill error correction, the eX5 servers offer additional levels of IBM
Active Memory protection:
Memory ProteXion technology provides multichip error protection and works in conjunction with Chipkill
technology—which provides multibit protection per chip—and standard ECC protection, to provide multilevel memory correction.
With memory rank sparing, two unused ranks per memory card are configured as spares. These spare
ranks are used in the event of a memory failure on the same memory card.
Memory mirroring works much like disk mirroring. The total memory is divided into two channels. Data is
written concurrently to both channels. If a DIMM fails in one of the DIMMs in the primary channel, it is
instantly disabled and the mirrored (backup) memory in the other channel becomes active (primary) until
the failing DIMM is replaced. With mirroring enabled, one-half of total memory is available for use. (Note:
Due to the double writes to memory, performance is affected.) Mirroring is handled at the hardware level;
no operating system support is required.
Memory scrubbing is an automatic daily test of all system memory. It detects and reports memory errors
that might be developing before they cause a server outage. Memory scrubbing and Memory ProteXion
work together. When a bit error is detected, memory scrubbing determines whether the error is
recoverable. If the error is recoverable Memory ProteXion technology will write the data to new location; if
it is not recoverable, scrubbing sends an alert to light path diagnostics, which then notifies IBM Systems
Director.

Please see the Legal Information section for important notices and information.

Optimized for virtualization and database applications with maximum
memory and compute capacity in a blade
Memory is available in 2GB, 4GB, 8GB, or 16GB DIMMs.

High-Performance Scalability
Because of eX5 design, an HX5 server has the incredible flexibility of scaling from 2 sockets to 4
sockets with ease, doubling the memory and storage capacity and I/O slots in the process. A 2node configuration is achieved simply by connecting 2 30mm blades together via the Quick Path
Interconnect (QPI) ports, for 4 sockets and 32 DIMMs (256GB).
Alternatively, you can scale via MAX5, adding memory capacity to increase performance in an
I/O-intensive enironment. This configuration connects 1 HX5 blade to 1 MAX5 blade, for a total of
up to 40 DIMMs (320GB), If even that’s not enough, you can connect 2 HX5 blades to 2 MAX5
blades, and the two MAX5 units are cabled together using our exclusive EXA scalability kit. The
result is a powerhouse 4-socket, 80 DIMM (640GB) blade server in only 120mm.
This scalability and memory expansion feature is a unique IBM enhancement, not offered by
other x86 server architectures.

XceL4v Dynamic Server Cache
A key performance feature of MAX5 expansion is the XceL4v L4 cache. When using a single
HX5 blade with a MAX5 expansion unit, no virtual cache needs to be taken from main memory.
However, when multiple MAX5 nodes are connected, 256MB of L4 cache is allocated from main
memory used for interprocessor communications between chassis, to keep data in synch. In a
2-chassis configuration, this amounts to 512MB of L4 cache. This not only compensates for any
performance hit that might otherwise result from sending data across the distances between
processors in multiple chassis, it actually results in a performance improvement versus a single
chassis. (IBM X3, eX4 and eX5 servers have achieved well over 100 #1 results on industrystandard benchmarks, such as TPC-C, TPC-E, TPC-H, SAP SD, vConsolidate, Vmark, and
more.)
This feature is another IBM-unique enhancement.

Integrated Virtualization
HX5 offers a separately orderable IBM 2GB USB Flash Drive option preloaded with VMware
ESXi 4.0 (an embedded version of VMware ESX Server). Microsoft Hyper-V and Xen are also
supported, installed by the user on an SSD.
ESXi is fully contained on the flash drive, without requiring any disk space. Because it runs from
flash memory, it’s extremely fast and ideal for diskless configurations. It also offers enhanced
security, because it runs without an operating system-based console and is updated/patched
much like firmware. ESXi includes all the performance, scalability and compatibility features of
ESX Server, including full VMFS support across FC SAN, iSCSI SAN, and NAS, and 4-way
VSMP. Rather than management through a Service Console based on a Linux operating system,
ESXi relies on aggregate management tools, including VirtualCenter, the Remote Command
Line interface and the introduction of CIM for standards-based and agentless hardware
monitoring. Licensing works the same as for “standard” ESX Server.

Disk Controllers
HX5 models support an optional LSI 1064E SAS/SATA controller (required for SSD support).
This controller supports up to two internal solid-state drives and offers hardware RAID-0/1/1E
support.

High Performance/High-Availability Internal Storage
The HX5 supports up to two fixed 1.8-inch solid-state drives (SSDs) internally:
• SATA-based solid-state — 50GB capacity (100GB maximum)
High I/O Performance
– Offers up to 8X more IOPS than HDDs (67/33% read/write OLTP transaction base mix);
– Optimized for heavy mix of read and write operations, such as transaction processing, media
streaming, surveillance, file copy, logging, backup / recovery, and business Intelligence
Lower-Cost IOPS Performance
– Yields better $/IOPS: lower capacity (GB) required to achieve higher IOPS
– Consumes less energy and produces less heat than a conventional disk drive

Please see the Legal Information section for important notices and information.

Optimized for virtualization and database applications with maximum
memory and compute capacity in a blade
Superior Uptime
– 3X the availability of mechanical disk drives5
– No moving parts to fail
– Enterprise wear-leveling to extend life even further
Full OS Support
– Supports all ServerProven OSes
Due to the statistically higher failure rates for traditional spinning media, IBM recommends the
use of the solid state drives (SSDs) as an alternative. They store data on flash memory chips,
rather than on magnetic media. Like HDDs, SSDs can be used as boot media and for random
access storage. However, SSDs offer higher thresholds of shock and vibration, and a higher
operating temperature range (between 0 and 70 degrees C). This yields a failure rate only 1/3
that of HDDs (approximately 3,000,000 hours MTBF vs. 1,000,000 hours). In addition, the IBM
50GB 1.8” Solid State Drive requires only 2W. This reduces the storage power requirement and
heat output by as much as 80%, compared to 2.5-inch HDDs. If used as a boot device, no
special device drivers are required.
Additional storage is available via the BladeCenter S chassis.
If you need more storage space, terabyte capacities are possible with optional external directattach, NAS, and SAN storage solutions.

External Tape Storage
The HX5 supports various external rack-mounted SAN-attached tape drives. Supported tape
technologies include:
• IBM System Storage TS2230 Express Tape Drive
• IBM System Storage TS2240 Tape Drive Model S4E
• IBM System Storage TS2900 Tape Autoloader
• IBM System Storage TS3100 Tape Library
• IBM System Storage TS3200 Tape Library
• IBM System Storage TS3310 Modular Tape Library
• IBM System Storage TS3500 Tape Library

Light Path Diagnostics
Light path diagnostics enables a technician to quickly identify and locate a failed or failing system
component, such as a specific blower module or memory DIMM. This enables quick replacement
of the component, which helps increase server uptime and lower servicing costs.
The front of each blade server—and the chassis itself—has an LED indicator light to show
possible component failures. This lets the servicer identify the failing component without the
need to or remove the blade server from the chassis. The light path diagnostics panel tells the
servicer which component of the affected server requires attention.
In addition, many components have their own identifying LEDs. For example, each of the
memory modules has an LED next to the socket, as do both processors. This allows the servicer
to easily identify exactly which component needs servicing. By following the “light path,” the
component can be replaced quickly, and without guesswork. (Note: In the event of a failed
DIMM, the system will restart and mark the DIMM as bad while offline, thus allowing the system
to continue running, with reduced memory capacity, until serviced.)

Gigabit Ethernet Controller
The HX5 includes a dual-port integrated Broadcom BCM5709S Gigabit Ethernet controller for
up to 10X higher maximum throughput than a 10/100 Ethernet controller. The controller offers
TOE (TCP Offload Engine) support, as well as failover and load balancing for better throughput
and system availability. It also supports highly secure remote power management using IPMI
2.0, plus Wake on LAN® and PXE (Preboot Execution Environment) Flash interface.
If 2 ports aren’t enough, optional 2-port or 4-port Ethernet expansion cards can be used for
additional ports. For example, the CIOv slot can hold a 2-port card, the CFFh slot supports a 4port card, and a bridge module can add another 2 ports, for a total of 10 Gigabit Ethernet ports
per HX5 blade.

MTBF of 73GB 2.5-inch 10K RPM HDD for the first 12 months = 305,167. MTBF of solid-state SanDisk SDD SATA 5000 2.5-inch 16GB =
918,298.

Please see the Legal Information section for important notices and information.

Optimized for virtualization and database applications with maximum
memory and compute capacity in a blade

High-Performance Adapter Slots
The HX5 blade server includes two PCIe adapter slots. They support CFF (compact form factor)
cards: one standard-speed CIOv and one high-speed CFFh card. Note: The SSD expansion
card is installed in the upper I/O slot. When SSDs are installed, both I/O slots are still available
for use.
Adding a second HX5 blade for a 2-wide 4-socket server doubles the number of PCIe card slots.
Adapters can be used to add fabrics to BladeCenter switch modules, including 10Gb Ethernet,
additional Gigabit Ethernet controllers, CNA, Fibre Channel, InfiniBand, SAS, etc.

BladeCenter Chassis
IBM’s blade architecture offers five choices of compatible and interoperable chassis in which to
use various blade servers. Each chassis serves different customer needs. The BladeCenter S is
a small, entry-level chassis designed for office environments. The original chassis (refreshed
with the latest Advanced Management Modules and power supply modules) offers maximum
density, great flexibility and a wide variety of expansion options at an entry-level price. The nextgeneration BladeCenter H chassis offers all of BladeCenter’s capabilities, and adds highperformance features, including 10Gb fabric support. If you need a ruggedized chassis (for
example, government/military or telecom), BladeCenter T offers special features optimized for
those environments. The next-generation BladeCenter HT is a high-performance ruggedized
telecommunications platform, also supporting 10Gb fabrics. HX5 is supported in the BladeCenter
H, BladeCenter HT and BladeCenter S chassis.
There is a high degree of interchangeability and compatibility of features among the chassis, and
all of these chassis can be installed in a rack along with other rack-optimized equipment.
See the separate IBM BladeCenter Chassis Product Guide for details.

Advanced Systems Management Capabilities
Each BladeCenter chassis offers a high level of systems management capabilities that are wellsuited to remote locations as well as to stand-alone environments. Features include the
Advanced Management Module (AMM), Integrated Management Module (IMM), IBM
ToolsCenter, Automatic Server Restart, Systems Director Active Energy Manager, Wake on LAN
support, PXE 2.0 support, text and graphics console redirect, Predictive Failure Analysis,
Embedded Dynamic System Analysis, and IBM Systems Director.
The chassis-based AMM, in combination with the HX5 blade server’s IMM, provides industrystandard Intelligent Platform Management Interface (IPMI) 2.0-compliant systems
management. The AMM provides a number of important system functions, including:
• Monitoring of system and battery voltage, system temperature, fans, power supplies, processor and
DIMM status
• Fan speed control
• Product ID and Family ID detection
• Highly secure remote power on/off
• System reset control
• NMI/SMI detection and generation
• System diagnostic LED control (power, HDD, activity, alerts, heartbeat)
• IPMI over LAN
• Serial Over LAN
• Proxy server support
• LAN messaging and alerting
• VLAN support
• Enhanced authentication and encryption algorithms (RMCP+, AES)
• Local update of IMM firmware
• Firmware firewall
• Support for IPMI v2.0 compliant management software (e.g., xCAT)
• Other mandatory and optional IPMI functions in the blade’s IMM
The IMM, via the management module, alerts IBM Systems Director to anomalous environmental
factors, such as voltage and thermal conditions—even if the server has failed.
Other systems management features offered for the combination of blade server and chassis
include:
• Predictive Failure Analysis for system processors, memory and HDDs, as well as chassis switch

Please see the Legal Information section for important notices and information.

10.

Optimized for virtualization and database applications with maximum
memory and compute capacity in a blade
modules, blower modules and power modules
• Web-based out-of-band control
• Latest OS failure screen capture
• Remote virtual media
• High-speed remote redirection of PCI video, keyboard and mouse
• SSL (Secure Socket Layer) and LDAP (Lightweight Directory Access Protocol) support
IBM ToolsCenter consolidates 42 needed tools for managing servers individually into an
integrated suite of 8 tools. They are organized by function: deployment, updates, configuration
and diagnostics. Tools are now simpler to access and use with a single webpage for access, a
common look and feel and a common command line interface for the scripting tools. The
ToolsCenter Bootable Media Creator offers significantly more functionality than past tools with
the ability to add more tools to the bootable image and to automatically download the bootable
environment if needed. Bootable Media Creator allows you to create bootable CDs, DVD, and
USB keys for updates customized to your systems.
In order to put control of processor power-saving features at the fingertips of administrators, IBM
developed IBM Systems Director Active Energy Manager. Active Energy Manager is designed to
take advantage of new processor features, such as balancing the performance of the system
according to available power input. It provides the ability to plan and predict power consumption
based on your BladeCenter hardware configuration. It also helps you reduce the infrastructure
required for redundancy, by using fewer servers on smaller power feeds and potentially lowering
your overall data center support costs. It does this by inventorying all components at the blade
level, then adding up the power draw for each blade and tracking that usage. In failure mode,
Active Energy Manager (through the BladeCenter Management Module) might request that certain
blades in each domain throttle down to reduce power consumption.
Automatic Server Restart (ASR) helps reduce downtime by restarting the server automatically
in the event of a system lockup. ASR technology is a combination of hardware circuitry tied into
the server’s system reset function and a device driver. As long as the server continues running,
the ASR watchdog timer will keep being reset, but if the operating system crashes or the
hardware freezes somehow the ASR software will be unable to reset the hardware timer. If the
timer is not reset within five minutes, it automatically triggers the ASR hardware, which
immediately restarts the server (and logs an ASR event with IBM Systems Director). These
features are designed so that no more than five minutes can pass before the server is restarted.
Text and Graphics Console Redirect support allows the administrator to remotely view HX5
text and graphics messages over serial or LAN.
Wake on LAN permits the server to be remotely powered on if it has been shut off. Once
powered up, the server can be controlled across the network, using the Preboot Execution
Environment (PXE).
Like Wake on LAN, PXE is system firmware. It allows software such as the IBM Remote
Deployment Manager to take control of a system before the BIOS, operating system or
applications are loaded (using Wake on LAN/PXE) and lets an administrator perform many lowlevel tasks remotely that would otherwise require a visit to each system. These tasks may
include such things as formatting a hard disk drive, updating system firmware, or deploying a
Windows or Linux operating system.
Predictive Failure Analysis (PFA) enables the AMM and the IMM to detect impending failure of
supported components (processors; memory; expansion cards; switch, blower and power
supplies; and hard disk drives) before actual failure, and alert the administrator through IBM
Systems Director. This gives you the ability to replace the failing component before it fails,
resulting in increased uptime.
Embedded Dynamic System Analysis (DSA) feature collects and analyzes system information
to aid in diagnosing problems. The diagnostic programs collect the following information:
•
System configuration
•
Network interfaces and settings
•
Installed hardware
•
Service processor status and configuration
•
Vital product data, firmware, and BIOS configuration
•
Hard disk drive health
•
RAID controller configuration
•
Event logs for ServeRAID controllers and service processors
The diagnostic programs create a merged log that includes events from all collected logs. The
information is collected into a file that you can send to IBM service and support. Additionally, you
can view the information locally through a generated text report file, or you can copy the log to
removable media and view the log from a Web browser.
IBM Systems Director software for advanced workgroup management is included with the

Please see the Legal Information section for important notices and information.

11.

Optimized for virtualization and database applications with maximum
memory and compute capacity in a blade
server. IBM Systems Director comes with a portfolio of tools, including Active Energy Manager,
Service and Support Manager, and other tools. System Availability (a no-charge download) and
Capacity Manager (sold separately) are available as add-ons for additional server management
and increased availability. IBM Systems Director provides a single uniform graphical interface for
all of these systems management functions.
IBM Systems Director enables you to customize thresholds and monitor system components (for
things like temperature, voltage regulation, etc.) to help maximize uptime.

Extensive System Support Features
The IBM services and technical support portfolio provides world-class, consistent, high-quality
service and support. From the start, IBM programs make it easier for you to plan for, configure
and purchase BladeCenter servers, get them running and keep them running long-term. These
features include IBM ServerProven, IBM Standalone Solutions Configuration Tool, IBM System x
and BladeCenter Power Configurator, IBM ServerGuide, IBM Systems Director Service and
Support Manager, Product Customization Services and extensive technical support offerings.
The IBM ServerProven program provides the confidence that specific options and operating
systems have been tested on the blade servers and chassis and are officially supported to work
together. It is updated frequently to keep the latest compatibility information at your fingertips.
The IBM Standalone Solutions Configuration Tool (SSCT) is a downloadable tool that
simplifies the often complex chore of configuring a full rack of servers (including blade servers)
and confirming that you have all the cables, power distribution units, KVM (keyboard, video and
mouse) switch boxes and other components you need, as well as the proper airflow clearances,
electrical circuits and other environmental conditions.
IBM System x and BladeCenter Power Configurator helps IT managers plan for data center
power needs, by providing the following information for specific configurations of System x and
BladeCenter systems: power input (watts), PDU sizing (amps), heat output (BTUs), airflow
requirements through chassis (CFM), VA rating, leakage current (mA), and peak inrush current
(amps).
IBM ServerGuide (installed from CD) simplifies the process of installing and configuring System
x servers. ServerGuide goes beyond mere hardware configuration by assisting with the
automated installation of the Microsoft Windows Server® 2008 operating system, device drivers
and other system components, with minimal user intervention. (Drivers are also included for
support of Novell NetWare, Red Hat Linux and SUSE LINUX.) This focus on deployment helps to
reduce both your total cost of ownership and the complexity that administrators and technical
personnel face.
IBM Systems Director Service and Support Manager (previously called IBM Electronic
Service Agent) is an innovative “call home” feature that allows System x and BladeCenter
servers to automatically report hardware problems to IBM support, which can even dispatch
onsite service6 if necessary to those customers entitled to onsite support under the terms of their
warranty or an IBM Maintenance Agreement. Service and Support Manager resides on a server
and provides electronic support and problem management capabilities through a highly secure
electronic dialogue between your systems and IBM. It monitors networked servers for hardware
errors and it can perform hardware and software inventories and report inventory changes to
IBM. All information sent to IBM is stored in a highly secure database and used for improved
problem determination.
Additional services include hardware warranty upgrades and factory-installed Product
Customization Services (PCS), such as asset tagging, hardware integration, software imaging
and operating systems personalization.
IBM offers extensive technical support by phone and via the Web. Support options include links
to forums/newsgroups, problem submission, online shopping support, service offerings, device
drivers for all IBM product lines, software downloads and even upcoming technical seminar
worldwide schedules and registration. Also available are remote installation, configuration and
usage support for both System x hardware and software, as well as onsite custom services to
provide the level of expertise you require.
IBM Maintenance and Technical Support solutions can help you get the most out of your IT
investment by reducing support costs, increasing availability and simplifying management with
integrated support for your multiproduct, multivendor hardware and software environment. For
more information on hardware maintenance, software support, solution support and managed
support, visit http://ibm.com/services/maintenance.

For onsite labor, IBM will attempt to diagnose and resolve the problem remotely before sending a technician.

Please see the Legal Information section for important notices and information.

12.

Optimized for virtualization and database applications with maximum
memory and compute capacity in a blade

Key Options

IBM options for System x servers let you take your servers to a
higher level
You rely on System x and blade options to supply a comprehensive solution for your business
needs. Options help create an optimized server system to meet your data protection, storage and
availability needs. Every IBM option is designed and tested for peak performance and flexibility,
helping to maximize your return on investment. The combination of System x servers and options
lets you keep your fingers on the pulse of your e-business.
Processors — The Intel Xeon processor provides high clock rates, 64-bit extensions, a large
cache, Hyper Threading Technology, Turbo Boost Technology, energy-saving features, and
advanced features for availability and manageability. Large cache size and multiple cores,
combined with an 800MHz or 978MHz memory access speed, reduce memory latency and
facilitate the movement of data through the processor and I/O devices. (Note: System
performance depends not only on the number of processors in the server but also on the power
and functionality of each processor, as well as the number, capacity, and arrangement of the
DIMMs.) Adding a second processor may be a cost-effective way to achieve significant
performance improvements.
Memory — Memory is a significant factor in systems application performance. Adding more
memory to a BladeCenter server is one of the most effective ways to increase application
performance. For best performance in a server with a 4-core processor, there should be twice as
much memory available as for a 2-core processor. With 8 cores, there should be twice as much
memory as for a 4-core processor. Note: Fewer large-capacity DIMMs may provide better
performance and use less energy than more lower-capacity DIMMs. On the other hand, more
lower-capacity DIMMs can be less expensive to buy than fewer high-capacity DIMMs.
Solid State Drives — IBM offers a 50.0GB 1.8” solid-state drive as a higher reliability, lowerenergy-use alternative to internal HDDs. They can be used as a highly available boot drive, for
storing disk images, or for other uses that stress read performance. Additional direct-attach
storage is available via the BladeCenter S chassis.
I/O slots — Additional slots are available by adding HX5 blades to the first, to form a multiblade
server.
ServeRAID Controllers — System x servers using ServeRAID technology allow organizations to
build a reliable foundation for business-critical computing. IBM ServeRAID technology allows an
array consisting of multiple physical hard disk drives to be treated as one logical drive.
ServeRAID technology also allows data to be stored redundantly, across multiple hard disk
drives— enhancing both the integrity and the availability of the data. SAS and SATA ServeRAID
controllers offer enhanced performance due to onboard processors and cache. Because IBM
ServeRAID controllers can help significantly improve data transfer rates, this technology is
extremely effective when implementing demanding, transaction-oriented applications. By
employing the advanced fault tolerance of IBM ServeRAID technology, companies can effectively
implement networked business systems that require large amounts of storage space for data and
applications that must be available for their businesses to continue operating.
External Storage — The IBM System Storage DS3000, DS4000, DS5000, and DS8000 series,
as well as the System Storage N3000, N5000, N6000, and N7000 series, comprise a powerful
and broad shared storage family with integrated management software designed to meet
midrange and enterprise needs. For lower-end needs, IBM offers the System Storage EXP810,
and EXP3000 storage expansion units. Additionally, external LAN-attached tape storage is
available.
Communication Modules — The various BladeCenter chassis support integrated
communication and I/O switches and/or bridges for Gigabit and 10Gb Ethernet, Myricom, 4Gb
and 8Gb Fibre Channel, 1X and 4X InfiniBand, iSCSI, 3Gb SAS, and others. Expansion
adapters for individual HX5 blades are available to interface with these modules. The
BladeCenter H and BladeCenter HT also support the Multi-Switch Interconnect Module, which
doubles the number of Gigabit Ethernet and Fibre Channel connections available to all blades in
the chassis.
Rear Door Heat eXchanger — The unit attaches to the back of an IBM S2 42U Enterprise Rack.
It is capable of removing up to 50,000 BTUs (14KVa) from the data center using water lines
under the raised floor. The door swings open for servicing.
Redundant features — Optional hot-swap drives, power supply modules, blower modules,
management modules, switches and bridges provide redundancy for the various BladeCenter
chassis.

Please see the Legal Information section for important notices and information.

13.

Optimized for virtualization and database applications with maximum
memory and compute capacity in a blade

HX5 Images
Front View
4-socket HX5

Status / cKVM
Panel
Light Path
Diagnostics Panel
Hexagonal Ventilation
Holes

Low-Profile HotSwap Handles

Interior View

1.8-inch SSD
Internal USB
(Embedded
Hypervisor)
Redundant
Midplane
Connections

Processor /
Heat Sink

16 DDR3
DIMM
Sockets
Processor /
Heat Sink
Dual 1GbE LOM
(10GbE Option)
1.8-inch SSD

2 I/O Slots
(1 CIOv + 1 CFFh)

Scalability
Connector

Please see the Legal Information section for important notices and information.

14.

Optimized for virtualization and database applications with maximum
memory and compute capacity in a blade

BladeCenter HX5 Specifications
Machine type

7872-42x, 61x/64x/65x, 82x, E6Y

Form factor (standard / maximum)

30mm / 120mm (2 30mm HX5 blades + 2 30mm MAX5 memory expansion blades)

Processor type

Eight-core Xeon
(L75xx)
1.86GHz L7555 (82x)

Six-core Xeon
(E75xx)
1.86GHz E7530 (61x),
2.0GHz E7540 (64x/65x,
E6Y)

Four-core Xeon
(E65xx/E75xx)
1.73GHz E6510 (CTO),
1.86GHz E7520 (42x)

Processor cores per 2-socket blade
(30mm)

16 (82x)

12 (61x/64x/65x, E6Y)

8 (42x)

Processor cores per 4-socket blade
server (60mm)

32 (82x)

24 (61x/64x/65x, E6Y)

16 (42x)

Maximum processor power draw
QuickPath Interconnect (QPI) speed
(gigatransfers per second)
# of processors standard /
maximum per blade and per 2-node
system

105W (61x, 64x/65x/E6Y)
6.4 GTps (64x/65x, E6Y)

XceL4v Dynamic Server (L4) cache
with MAX5

5.86 GTps (61x, 82x)

1 / 2; up to 4 total (2-node configuration)—
42x, 61x/64x/65x, 82x
24MB (82x)

Internal L3 cache

95W (42x, 82x)
4.8 GTps (42x)

2 / 2; up to 4 total (2-node configuration)—
E6Y

18MB (42x, 64x/65x/E6Y)

12MB (61x)

Up to 256MB per chassis (512GB max.)
Intel 7500 / IBM eX5

Chipset

4 QPI Ports per chassis
3 EXA ports per MAX5

Scalability ports
# of DIMM sockets total / available

16 / 14

16 / 0

Standard / maximum memory7 per
blade

8GB (2 x 4GB) / 128GB
(42x, 61x/64x/65x, 82x)

64GB (16 x 4GB) / 128GB
(E6Y)

Maximum memory per HX5 blade
plus MAX5 expansion unit

320GB (40 x 8GB)

Maximum memory with 2 HX5
blades

256GB (32 x 8GB)

Maximum memory with 2 HX5
blades and 2 MAX5 expansion units
Standard memory type

640B (80 x 8GB)
Registered PC3-10600 DDR3 ECC (1066MHz)
Yes

Memory interleaving
DIMM capacities supported

2GB, 4GB, 8GB VLP

Chipkill protection supported

Yes

Memory ProteXion supported

Yes

Memory mirroring supported

Yes

Memory rank sparing supported

Yes

Memory scrubbing supported

Yes

# of 1.8-inch drive bays total /
available
# of 2.5-inch drive bays total /

4 / 4 SSD (per 4-socket server
configuration)

2 / 2 SSD (per server blade)
None

Maximum memory and disk capacity may require the replacement of standard components with the largest supported component available.

Please see the Legal Information section for important notices and information.

15.

Optimized for virtualization and database applications with maximum
memory and compute capacity in a blade

BladeCenter HX5 Specifications
available
# of 3.5-inch drive bays total /
available
Maximum internal SSD capacity

None
100GB (2 x 50GB) fixed

200GB (4 x 50GB) fixed
50.0GB

SSD capacities supported

None

# of SSDs standard

Modular Flash Drives supported
Internal USB Flash Drive supported

1 (preloaded with hypervisor)

# of optical drives standard

None (one in BladeCenter chassis)

# of diskette drives standard

None (one standard in BladeCenter H chassis)

Internal tape drives supported

None (SAN-attached)
SATA

SSD drive interface
Integrated disk controller

SATA controller integrated into the processor

Optional RAID controller

LSI Logic 1064

RAID levels supported

RAID-0/1/1E (optional)
NAS/SAN-attach

External disk drive support

2 CIOv and 2 CFFh per 4-socket/2-node
server configuration

1 CIOv and 1 CFFh per node

# of PCIe slots
# of I/O ports per blade (maximum)

8 (16 in a 4-socket server configuration)

# of video ports

None (chassis-attached)

Video controller

Matrox G200eV (in IMM)
16MB SDRAM

Video memory
Maximum video resolution at 32-bit
color
Gigabit Ethernet controllers std
# of Gigabit Ethernet ports

1024x768 resolution (analog), with a color depth of 32 bits at 85Hz;
1440x90 resolution (digital), with a color depth of 32 bits at 60Hz
Dual-port Broadcom BCM5709S—TOE-enabled
2 (standard per blade); 12 with BladeCenter Virtual Fabric Adapter

# of RS485 ports

None

# of serial ports

None (1 direct via BladeCenter H chassis, or Serial over LAN in BladeCenter H)

# of parallel ports

None

# of mouse ports

None (1 via chassis)

# of keyboard ports

None (1 via chassis)

# of USB ports

1 (plus 2 via chassis)

Systems management controller
Diagnostic LEDs (front panel)
Predictive Failure Analysis support

Integrated Management Module
Power good, blade location, over temperature, information, general fault
Processor, memory, SSDs, PCIe expansion cards
UEFI 2.1

BIOS type
Power supply size

Contained in chassis

# of power supplies standard /
maximum

Contained in chassis

Please see the Legal Information section for important notices and information.

16.

Optimized for virtualization and database applications with maximum
memory and compute capacity in a blade

BladeCenter HX5 Specifications
# of fans/blowers standard /
maximum

Contained in chassis
9.7” (245mm) H
1.14” (29mm) W
17.6” (446mm) D

Dimensions (HWD) / weight

Operating systems supported

12 lbs (maximum)
5.44 kg (maximum)

Microsoft Windows Server 2008 and R2 (Standard/Web/Enterprise/Datacenter Editions)
32/64-bit, Windows HPC Server 2008 64-bit, RHEL 6 64-bit—without Xen, RHEL 5.3 64bit—with or without Xen, SLES 11 64-bit with or without Xen, SLES 10 64-bit with or
without Xen, VMware ESX/ESXi 4.0

Extended/long life support

Selected blades are supported for long life. (Contact IBM sales for details.)

Length of limited warranty

3 years (parts and labor) onsite

The Bottom Line

The HX5 offers maximum bang for the buck by incorporating industry-leading features in a tiny
package:
Price/Performance
• Multi-core processors — Up to two 1.86GHz 4-core, 1.86 or 2.00GHz 6-core, or 1.86GHz 4-core
Xeon 7500 Series processors; up to two 1.73GHz 4-core Xeon 6500 Series processors (via CTO)
• Large cache — 12MB to 24MB of L3 processor cache (processor-specific)
• Fast memory access — 978MHz or 800MHz access (depending on the processor model and
DIMMs used)
• Embedded virtualization (Separately orderable option)
• Fast I/O — 10Gb Ethernet, 4X InfiniBand, iSCSI, 6Gb SAS or 8Gb Fibre Channel connectivity via an
optional expansion card
• Fast communications — Integrated dual Gigabit Ethernet, with the option for two or four additional
Gigabit Ethernet ports via expansion cards and expansion unit (total 12 ports per blade); support for
10Gb Ethernet
Flexibility
• Single-, double-, triple-, and quad-wide configurations (up to 2 blade servers and 2 MAX5 memory
expansion units)
• Large memory capacity — Up to 128GB per blade; 320GB with 1 blade and 1 MAX5 unit; up to
640GB with 2 blades and 2 MAX5 units
• Up to two internal 1.8-inch non-hot-swap SSDs per node
• Solid-state drives are an energy-saving, higher-reliability alternative to HDD storage
• Integrated RAID — RAID-1 mirrored arrays optional
• Two available adapter slots standard :
Two CFF (compact form factor) slots: one high-speed CFFh and one standard-speed CIOv
Manageability and Availability
• IBM Systems Director systems management software, including:
IBM Systems Director Active Energy Manager
IBM Service and Support Manager
• Integrated Management Module:
IPMI 2.0 compliance, including highly secure remote power control
cKVM
Advanced management capabilities
• Interface to one or two Advanced Management Modules in the chassis for advanced systems
management capability
Supports LDAP and SSL industry standards
Text and graphics console redirection systems management
Serial over LAN
• Active Memory protection:
Advanced Chipkill ECC memory correction
Memory ProteXion support

Please see the Legal Information section for important notices and information.

17.

Optimized for virtualization and database applications with maximum
memory and compute capacity in a blade
Memory rank sparing
Memory mirroring
Memory scrubbing
• Solid-state drive as a high-reliability alternative to internal HDD storage (with up to three times the
MTBF of spinning disk drives)
• Numerous hot-swap/redundant capabilities provided via the chassis

Server Comparison Chart
The following table shows the suggested uses for the respective IBM BladeCenter blade servers, including comparisons of the uses
for which each server is best suited:
Important

Nice to Have

Can do without

Requirements

Security

Web Serving
File & Print

QS22

Infrastructure
Applications Email/Collaboration

JS23

Database

JS12

Business Continuity

LS42

Virtualization

LS22

Branch Office

HX5

Point of Sale

HS22V

Business
Hosted Client
Applications

HS22

CRM

HS12

Collaboration
ERP/SCM

Security

Communities
Commerce

Distributed
Deployment

Content

Systems
Management

Web 2.0 /
Web 3D

Good

BladeCenter Servers

High Availability

Density

Business Intelligence

I/O and Storage

High Performance DB

Integer
Performance

HPC

Modeling & Simulation

Memory
Throughput

Key Workloads
Cluster / HPC

Floating Point
Performance

Scalability

Theme

Better

Please see the Legal Information section for important notices and information.

18.

Optimized for virtualization and database applications with maximum
memory and compute capacity in a blade

For More Information
IBM BladeCenter Servers and Options
IBM Systems Director Service and Support Manager
IBM System x and BladeCenter Power Configurator
Standalone Solutions Configuration Tool (SSCT)
Configuration and Options Guide
ServerProven Program
Technical Support
Other Technical Support Resources

http://ibm.com/systems/bladecenter
http://ibm.com/support/electronic
http://ibm.com/systems/bladecenter/powerconfig
http://ibm.com/servers/eserver/xseries/library/configtools.html
http://ibm.com/servers/eserver/xseries/cog
http://ibm.com/servers/eserver/serverproven/compat/us
http://ibm.com/server/support
http://ibm.com/servers/eserver/techsupport.html

Legal Information

intends to make them available in all countries in which IBM
operates. IBM PROVIDES THIS PUBLICATION “AS IS”
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. Some jurisdictions do not allow disclaimer of
express or implied warranties in certain transactions;
therefore, this statement may not apply to you.

© IBM Corporation 2010
IBM Systems and Technology Group
Dept. U2SA
3039 Cornwallis Road
Research Triangle Park, NC 27709
Produced in the USA
March 2010
All rights reserved
For a copy of applicable product warranties, write to: Warranty
Information, P.O. Box 12195, RTP, NC 27709, Attn: Dept.
JDJA/B203. IBM makes no representation or warranty
regarding third-party products or services including those
designated as ServerProven or ClusterProven. Telephone
support may be subject to additional charges. For onsite labor,
IBM will attempt to diagnose and resolve the problem remotely
before sending a technician.
IBM, the IBM logo, ibm.com, Active Memory, AIX,
BladeCenter, Calibrated Vectored Cooling, Chipkill, DB2,
PowerPC, PowerXCell, ServerGuide, ServeRAID, System
Storage, System x, Systems Director Active Energy Manager,
Wake on LAN, and X-Architecture are trademarks of IBM
Corporation in the United States, other countries, or both. If
these and other IBM trademarked terms are marked on their
first occurrence in this information with a trademark symbol (®
or ™), these symbols indicate U.S. registered or common law
trademarks owned by IBM at the time this information was
published. Such trademarks may also be registered or
common law trademarks in other countries. A current list of
IBM trademarks is available at
http://ibm.com/legal/copytrade.shtml.
Cell Broadband Engine is a trademark of Sony Computer
Entertainment, Inc. in the United States, other countries, or
both and is used under license therefrom.
InfiniBand is a trademark of the InfiniBand Trade Association.
Intel and Xeon are trademarks or registered trademarks of
Intel Corporation or its subsidiaries in the United States and
other countries.
Linux is a registered trademark of Linus Torvalds.
Microsoft, Windows, the Windows logo, Windows Server, and
SQL Server are trademarks or registered trademarks of
Microsoft Corporation.
Other company, product and service names may be
trademarks or service marks of others.
IBM reserves the right to change specifications or other
product information without notice. References in this
publication to IBM products or services do not imply that IBM
B

This publication may contain links to third party sites that are
not under the control of or maintained by IBM. Access to any
such third party site is at the user's own risk and IBM is not
responsible for the accuracy or reliability of any information,
data, opinions, advice or statements made on these sites. IBM
provides these links merely as a convenience and the
inclusion of such links does not imply an endorsement.
Information in this presentation concerning non-IBM products
was obtained from the suppliers of these products, published
announcement material or other publicly available sources.
IBM has not tested these products and cannot confirm the
accuracy of performance, compatibility or any other claims
related to non-IBM products. Questions on the capabilities of
non-IBM products should be addressed to the suppliers of
those products.
Some machines are designed with a power management
capability to provide customers with the maximum uptime
possible for their systems. In extended thermal conditions,
rather than shutdown completely, or fail, these machines
automatically reduce the processor frequency to maintain
acceptable thermal levels.
MB, GB and TB = 1,000,000, 1,000,000,000 and
1,000,000,000,000 bytes, respectively, when referring to
storage capacity. Accessible capacity is less; up to 3GB is
used in service partition. Actual storage capacity will vary
based upon many factors and may be less than stated.
Performance is in Internal Throughput Rate (ITR) ratio based
on measurements and projections using standard IBM
benchmarks in a controlled environment. The actual
throughput that any user will experience will depend on
considerations such as the amount of multiprogramming in the
user’s job stream, the I/O configuration, the storage
configuration and the workload processed. Therefore, no
assurance can be given that an individual user will achieve
throughput improvements equivalent to the performance ratios
stated here.
Maximum internal hard disk and memory capacities may
require the replacement of any standard hard drives and/or
memory and the population of all hard disk bays and memory
slots with the largest currently supported drives available.
When referring to variable speed CD-ROMs, CD-Rs, CD-RWs
and DVDs, actual playback speed will vary and is often less
than the maximum possible.
BLO03039-USEN-01
B

Please see the Legal Information section for important notices and information.

19.

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Author                          : MCHAPMAN
Create Date                     : 2010:05:14 12:59:14Z
Modify Date                     : 2011:06:08 14:09:46+04:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : MCHAPMAN
Title                           : Microsoft Word - BC-HX5 Product Guide 03-10.doc
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2011:06:08 14:09:46+04:00
Producer                        : GPL Ghostscript 8.15
Document ID                     : uuid:4716ba15-d5d8-4016-a55b-677570b2437b
Instance ID                     : uuid:34d049ff-c857-42f5-bf6b-57fe73d151be
Page Count                      : 19

EXIF Metadata provided by EXIF.tools

BC HX5 Product Guide 03 10 Cd537190 Cfdd 429d 84a7 Bd4105a8628c

Navigation menu

Versions of this User Manual:

Views

Navigation