Chapter 1 Ch1
User Manual: Chapter 1 IronHorse AC Motors Manual - AutomationDirect
Open the PDF directly: View PDF 
.
Page Count: 34
| Download | |
| Open PDF In Browser | View PDF |
Getting Started Chapter 1 In This Chapter... Manual Overview���������������������������������������������������������������������������������������������������� 1–2 Overview of this Publication ���������������������������������������������������������������������������������������� 1–2 Who Should Read This Manual����������������������������������������������������������������������������������� 1–2 Technical Support �������������������������������������������������������������������������������������������������������� 1–2 Special Symbols����������������������������������������������������������������������������������������������������������� 1–2 Available Models ���������������������������������������������������������������������������������������������������� 1–3 MTF Farm-Duty T-Frame Single-Phase Motors Features and Specifications����������� 1–3 MTR/MTR2 Rolled-Steel 56C/56HC-Frame Single-Phase Motors – Features and Specifications ����������������������������������������������������������������������������������� 1–4 MTR and MTRP Rolled-Steel 56C/56HC-Frame Three-Phase Motors Features and Specifications���������������������������������������������������������������������������������������� 1–6 MTSS Stainless-Steel 56C-Frame Three-Phase Motors Features and Specifications ������������������������������������������������������������������������������������������������������� 1–9 MTCP Premium-Efficiency Cast-Iron Three-Phase Motors Features and Specifications ����������������������������������������������������������������������������������������������������� 1–11 MTC EPAct Cast-Iron Three-Phase Motors Features and Specifications ��������������� 1–24 Receiving and Inspection�������������������������������������������������������������������������������������� 1–32 Unpacking�������������������������������������������������������������������������������������������������������������������� 1–32 IronHorse® Part Number Explanation ��������������������������������������������������������������������� 1–32 Reshipping ������������������������������������������������������������������������������������������������������������ 1–33 Long Term Storage ����������������������������������������������������������������������������������������������� 1–33 Warranty����������������������������������������������������������������������������������������������������������������� 1–33 IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Page 1–1 Chapter 1: Getting Started Manual Overview Overview of this Publication The IronHorse® General Purpose AC Motor User Manual describes the installation, maintenance and use of all IronHorse General Purpose Motors. Who Should Read This Manual This manual contains important information for those who will install, maintain, use and/or resell any of the IronHorse motors. Technical Support By Telephone: 770-844-4200 (Mon.-Fri., 9:00 a.m.-6:00 p.m. E.T.) On the Web: support.automationdirect.com Our technical support group is glad to work with you in answering your questions. If you cannot find the solution to your particular application, or, if for any reason you need additional technical assistance, please call technical support at 770‑844‑4200. We are available weekdays from 9:00 a.m. to 6:00 p.m. Eastern Time. We also encourage you to visit our web site where you can find technical and non-technical information about our products and our company. Visit us at www.automationdirect.com. Special Symbols NOTE: When you see the “notepad” icon in the left-hand margin, the paragraph to its immediate right will be a special note. WARNING: When you see the “exclamation mark” icon in the left-hand margin, the paragraph to its immediate right will be a warning. This information could prevent injury, loss of property, or even death (in extreme cases). Page 1–2 IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Chapter 1: Getting Started Available Models MTF Farm-Duty T-Frame Single-Phase Motors Features and Specifications IronHorse® single-phase farm-duty motors are available from 2hp to 5hp. All models have a TEFC housing (steel frame with iron end bells) that is fully gasketed for use in dirty environments. All motors are NEMA L design. All models include a class-10 manual-reset locked-rotor thermal protector (motor thermal overload protection must be provided separately). We recommend disconnecting power to the motor before reseting the thermal protector. Do not reset more than twice in succession. The motor must cool to 40°C (104°F) before a third reset. Cast-Iron T-Frame 1-Phase Farm-Duty Motor Specifications HP MTF-002-1C18-182 2 MTF-003-1C18 3 MTF-005-1C18 5 Base Voltage* RPM 1800 230VAC ±10% Service Factor 1.15 @ 230VAC 1.0 @ 208VAC L NEMA Frame Part Number NEMA Design Motor Specifications – Single-Phase Farm-Duty Motors (60Hz) Housing F.L. Amps @ 230VAC Approx Weight (lb) TEFC IP55 8.5 74 12.9 85 21.2 105 182T 184T 184T * Operate on 230VAC +/- 10% (1.15 @ 230VAC; 1.0 S.F. @ 208V), single-phase power only. Cast-Iron T-Frame 1-Phase Farm-Duty Motor Performance Data MTF-002-1C18-182 2 MTF-003-1C18 3 MTF-005-1C18 5 1725 230V No Load Full Load Locked Rotor Full Load Locked Rotor Break down F.L. Power Factor HP F.L. Efficiency (%) Part Number F.L. RPM Performance Data – Single-Phase Farm-Duty Motors (60Hz) Rotor Inertia (lb·ft2) 2.7 8.5 70.0 6.04 20.54 15.10 82.5 0.92 0.35 3.9 12.9 95.0 9.11 32.80 23.69 81.5 0.93 0.60 6.6 21.2 160.0 15.30 58.14 36.72 81.0 0.90 0.81 Current @ 230V (Amps) Torque (lb·ft) IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Page 1–3 Chapter 1: Getting Started MTR/MTR2 Rolled-Steel 56C/56HC-Frame Single-Phase Motors – Features and Specifications IronHorse® single-phase 56C/56HC-frame* motors are available from 1/3 hp to 2 hp. All models have a TEFC rolled steel frame, cast aluminum end bell and removable mounting bases. Rolled-Steel 56C-Frame 1-Phase Motor Specifications Voltage NEMA Frame Base RPM NEMA Design HP Part Number Service Factor Motor Specifications – Single-Phase 56C/56HC-Frame Motors (60Hz except as indicated) Housing F.L. Amps @ 115V/230V 60Hz (110/220V 50Hz) Approx Weight (lb) IP43 6.6 / 3.3 26 8.8 / 4.4 28 11.0 / 5.5 32 13.6 / 6.8 38 15.2 / 7.6 45 14.5 / 7.3 (14.0 / 7.0) 37 19.6 / 9.8 (23.4 / 11.7) 44 5.4 / 2.7 (5.4 / 2.7) 21 6.5 / 3.3 (6.4 / 3.2) 23 9.2 / 4.6 (9.2 / 4.6) 27 11.5 / 5.8 (10.2 / 5.1) 30 14.2 / 7.1 37 13.0 / 6.5 (11.4 / 5.7) 31 17.0 / 8.5 (14.6 / 7.3) 37 @ 60Hz (50Hz) 1800 RPM MTR-P33-1AB18 1/3 MTR-P50-1AB18 1/2 MTR-P75-1AB18 3/4 MTR-001-1AB18 1 MTR-1P5-1AB18 1-1/2 MTR2-1P5-1AB18 1-1/2 (1) MTR2-002-1AB18 2 (1-1/2) MTR2-P33-1AB36 1/3 (1/4) MTR2-P50-1AB36 1/2 (1/3) 1800 1800 (1500) 115/208-230 115/230 (110/220) 1.15 1.15 (1) N 56C flange mount TEFC rolled steel frame cast AL end bell L 56HC F1 conduit box location 3600 RPM MTR2-P75-1AB36 3/4 (1/2) MTR2-001-1AB36 1 (3/4) MTR-1P5-1AB36 1-1/2 MTR2-1P5-1AB36 1-1/2 (1) MTR2-002-1AB36 2 (1-1/2) IP43 3600 (3000) 115/230 (110/220) 1.15 (1) N 56C 3600 115/208-230 1.15 3600 (3000) 115/230 (110/220) 1.15 (1) TEFC rolled steel frame N cast AL end bell L F1 conduit box location Note: P lease review the AutomationDirect Terms & Conditions for warranty and service on this product. NOTE: *56HC are suitable for 56C C-face mounting or 56, 143T, or 145T frame foot mounting dimensions. Page 1–4 IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Chapter 1: Getting Started MTR(2) Rolled-Steel 56C/56HC-Frame Single-Phase Motors Features and Specifications (continued) Rolled-Steel 56C-Frame 1-Phase Motor Performance Data Performance Data – Single-Phase 56C/56HC-Frame Motors (230V / 60Hz data except as indicated) Current @ 115V/230V (Amps) Torque (lb·ft) F.L. Power Factor F.L. RPM F.L. Efficiency (%) HP Rotor Inertia (lb·ft2) MTR-P33-1AB18 1/3 2.2 6.6 / 3.3 31 / 18 1.02 3.06 2.81 56.0 0.62 0.075 MTR-P50-1AB18 1/2 2.93 8.8 / 4.4 37 / 21 1.52 4.56 4.18 57.0 0.63 0.080 MTR-P75-1AB18 3/4 3.67 11.0 / 5.5 55 / 32 2.29 6.30 5.73 65.0 0.65 0.095 MTR-001-1AB18 1 4.53 13.6 / 6.8 75 / 43 3.04 8.36 7.60 68.0 0.66 0.120 MTR-1P5-1AB18 1-1/2 5.07 15.2 / 7.6 120 / 65 4.57 11.43 10.28 71.0 0.75 0.142 MTR2-1P5-1AB18 1-1/2 (1) 5.23 14.5 / 7.3 110 / 55 4.46 8.70 10.45 77.0 0.84 0.095 MTR2-002-1AB18 2 (1-1/2) 8.07 19.6 / 9.8 152 / 76 6.06 12.17 13.81 79.0 0.82 0.121 Part Number @ 60Hz (50Hz) 230V No Load Full Load Locked Rotor Full Load Locked Rotor Break down 1800 RPM 1725 1725 (1425) 3600 RPM MTR2-P33-1AB36 1/3 (1/4) MTR2-P50-1AB36 1/2 (1/3) MTR2-P75-1AB36 3/4 (1/2) MTR2-001-1AB36 1 (3/4) MTR-1P5-1AB36 1-1/2 MTR2-1P5-1AB36 1-1/2 (1) MTR2-002-1AB36 2 (1-1/2) 3450 (2850) 3450 3450 (2850) 2.14 5.4 / 2.7 37 / 19 0.50 2.18 1.96 59.5 0.72 0.031 2.23 6.5 / 3.3 47 / 23 0.74 2.59 2.42 63.0 0.74 0.034 2.82 9.2 / 4.6 66 / 33 1.12 4.62 3.44 66.5 0.78 0.041 3.04 11.5 / 5.8 82 / 41 1.50 4.48 3.83 69.5 0.80 0.047 3.0 14.2 / 7.1 116 / 58 2.2 7.5 5.4 72.0 0.9 0.03 3.90 13.0 / 6.5 109 / 55 2.21 3.22 5.08 77.0 0.94 0.047 4.51 17.0 / 8.5 131 / 65 3.02 4.45 6.82 79.5 0.94 0.060 IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Page 1–5 Chapter 1: Getting Started MTR and MTRP Rolled-Steel 56C/56HC-Frame Three-Phase Motors Features and Specifications IronHorse® rolled steel 56C/56HC-frame* three-phase motors are available from 1/3 hp to 3 hp. All models have a TEFC frame, cast aluminum end bell and removable mounting bases. Rolled-Steel 56C/56HC-Frame 3-Phase Motor Specifications – 1800 & 3600 rpm NEMA Design Service Factor HP Voltage Part Number Base RPM Motor Specifications – MTR/MTRP 3-Phase 56C/56HC-Frame Motors – 1800 & 3600 rpm NEMA Frame Housing 1800 RPM F.L. Amps @ 230V/460V Approx Weight (lb) 1800 RPM MTR-P33-3BD18 1/3 1.6 / 0.8 23 MTR-P50-3BD18 1/2 2.0 / 1.0 24 MTR-P75-3BD18 3/4 MTR-001-3BD18 1 MTRP-001-3BD18 MTRP-1P5-3BD18 1800 1-1/2 MTR-002-3BD18 208-230/460 – 3-phase MTR-1P5-3BD18 2 MTRP-002-3BD18 3600 RPM MTR-P33-3BD36 1/3 MTR-P50-3BD36 1/2 MTR-P75-3BD36 3/4 MTR-001-3BD36 MTRP-001-3BD36 MTR-1P5-3BD36 MTRP-1P5-3BD36 MTR-002-3BD36 MTRP-002-3BD36 MTRP-003-3BD36 1 3600 1-1/2 2 3 1.15 B 56C flange mount (MTRP = 56HC) TEFC rolled steel frame cast aluminum end bell F1 conduit box location 2.8 / 1.4 26 3.6 / 1.8 29 3.2 / 1.6 35 4.8 / 2.4 33 4.5 / 2.3 43 6.0 / 3.0 42 6.0 / 3.0 49 3600 RPM 1.6 / 0.8 23 2.2 / 1.1 24 2.9 / 1.5 26 3.6 / 1.8 28 3.0 / 1.50 23 4.6 / 2.3 34 4.0 / 2.0 31 6.0 / 3.0 43 5.2 / 2.6 33 7.4 / 3.7 39 Note: P lease review the AutomationDirect Terms & Conditions for warranty and service on this product. NOTE: *56HC are suitable for 56, 143T, or 145T frame foot mounting dimensions. Page 1–6 IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Chapter 1: Getting Started MTR and MTRP Rolled-Steel 56C/56HC-Frame Three-Phase Motors Features and Specifications (continued) Motor Performance Data – 1800 rpm Performance Data – MTR Three-Phase 56C/56HC-Frame Motors – 1800 rpm (460V data except as indicated) Part Number HP F.L. RPM Minimum Speed (rpm) CT (4:1) VT (10:1) Maximum Speed (rpm) CHP* Safe Current @ 230V/460V (Amps) No Load Full Load Locked Rotor MTR-P33-3BD18 1/3 0.53 / 0.27 1.6 / 0.8 8/4 MTR-P50-3BD18 1/2 0.67 / 0.33 2.0 / 1.0 12 / 6 MTR-P75-3BD18 3/4 MTR-001-3BD18 MTRP-001-3BD18 MTR-1P5-3BD18 MTRP-1P5-3BD18 MTR-002-3BD18 MTRP-002-3BD18 1 1-1/2 2 1725 863 345 5400 0.93 / 0.47 2.8 / 1.4 18 / 9 1.2 / 0.6 3.6 / 1.8 24 / 12 1760 440 176 2700 2.2 / 1.1 3.2 / 1.6 31 / 16 1725 863 345 5400 1.5 / 0.8 4.8 / 2.4 36 / 18 1760 440 176 2700 2.8 / 1.4 4.5 / 2.3 47 / 24 1725 863 345 5400 2.0 / 1.0 6.0 / 3.0 48 / 24 1760 440 176 2700 3.6 / 1.8 6.0 / 3.0 61 / 31 2700 Torque (lb·ft) Part Number HP Full Load Locked Rotor Break -down F.L. Efficiency (%) F.L. Power Factor Rotor Inertia (lb·ft2) MTR-P33-3BD18 1/3 1.02 2.55 2.81 67.0 0.70 0.058 MTR-P50-3BD18 1/2 1.52 3.80 4.18 69.0 0.72 0.068 MTR-P75-3BD18 3/4 MTR-001-3BD18 MTRP-001-3BD18 MTR-1P5-3BD18 MTRP-1P5-3BD18 MTR-002-3BD18 MTRP-002-3BD18 1 1-1/2 2 n/a 2.29 5.73 6.30 71.0 0.74 0.075 3.02 7.55 8.31 73.0 0.76 0.086 3 12.35 14.51 4.57 10.28 11.43 n/a 85.0 0.69 0.107 75.0 0.78 0.108 4.4 21.68 21.76 86.5 0.72 0.135 6.09 13.70 15.23 77.0 0.80 0.143 6.03 27.3 27.46 86.5 0.74 0.158 * Maximum Constant HP rpm is for direct-coupled loads. IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Page 1–7 Chapter 1: Getting Started Motor Performance Data – 3600 rpm Performance Data – Three-Phase 56C/56HC-Frame Motors – 3600 rpm (460V data except as indicated) Part Number HP MTR-P33-3BD36 1/3 MTR-P50-3BD36 1/2 MTR-P75-3BD36 3/4 MTR-001-3BD36 MTRP-001-3BD36 MTR-1P5-3BD36 MTRP-1P5-3BD36 MTR-002-3BD36 MTRP-002-3BD36 MTRP-003-3BD36 1 1-1/2 2 3 F.L. RPM Minimum Speed (rpm) Maximum Speed (rpm) Current @ 230V/460V (Amps) CT (4:1) VT (10:1) 3450 1725 3450 1725 3450 1725 690 3450 1725 690 3500 875 350 1.52 / 0.76 3450 1725 690 3500 875 350 CHP* Locked Rotor No Load Full Load 690 1.2 / 0.59 1.6 / 0.8 9/5 690 1.4 / 0.7 2.2 / 1.1 14 / 7 1.5 / 0.75 2.9 / 1.5 17 / 8.9 1.7 / 0.85 3.6 / 1.8 25 / 13 3.00 / 1.50 22 / 11 5400 Safe 5400 1.8 / 0.9 4.6 / 2.3 29 / 17 1.8 / 0.9 3.96 / 1.98 38 / 19 3450 1725 690 3.4 / 1.7 6.0 / 3.0 57 / 30 3500 875 350 2.28 / 1.14 5.22 / 2.61 53/27 3500 875 350 3.54 / 1.77 7.38 / 3.69 89 / 45 Torque (lb·ft) Part Number HP Full Load Locked Rotor Break -down F.L. Efficiency (%) F.L. Power Factor Rotor Inertia (lb·ft2) MTR-P33-3BD36 1/3 0.50 3.0 3.0 57.0 0.71 0.084 MTR-P50-3BD36 1/2 0.75 4.4 4.5 62.0 0.71 0.095 MTR-P75-3BD36 3/4 1.13 6.0 5.8 67.0 0.78 0.107 MTR-001-3BD36 MTRP-001-3BD36 MTR-1P5-3BD36 MTRP-1P5-3BD36 MTR-002-3BD36 MTRP-002-3BD36 MTRP-003-3BD36 1 n/a 1-1/2 2 3 1.50 7.9 7.1 69.0 0.82 0.122 1.51 3.98 4.93 77 0.83 0.034 2.25 11.2 8.4 72.0 0.85 0.143 2.21 7.94 9.03 84.0 0.85 0.048 0.188 n/a 3.06 18.9 13.4 75.0 0.78 3.02 12.23 12.8 85.5 0.86 0.056 4.49 19.44 20.39 86.5 0.85 0.069 * Maximum Constant HP rpm is for direct-coupled loads. Page 1–8 IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Chapter 1: Getting Started MTSS Stainless-Steel 56C-Frame Three-Phase Motors Features and Specifications Stainless-Steel 56C-Frame ThreePhase Motor with Round Body Stainless-Steel 56C-Frame ThreePhase Motor with Rigid Base IronHorse stainless steel 56C-frame three-phase motors are available from 1/3 hp to 2 hp. All models have TEFC frames and stainless steel end bells, and they are available with or without rigid mounting bases. Stainless-Steel 56C-Frame 3-Phase Motor Specifications – 1800 & 3600 rpm NEMA Frame NEMA Design Service Factor HP Voltage Part Number Base RPM Motor Specifications – MTSS 3-Phase 56C-Frame Motors – 1800 & 3600 rpm Housing F.L. Amps @ 208-230V/460V 208-230/460 – 3-phase 3600 1800 1800 RPM 1800 RPM TEFC 1/3 1.5-1.4 / 0.7 MTSS-P33-3BD18R stainless steel 1/2 1.55-1.5 / 0.75 MTSS-P50-3BD18R frame with round body 3/4 2.6-2.4 / 1.2 MTSS-P75-3BD18R 1 3.5-3.2 / 1.6 MTSS-001-3BD18R F1 conduit box 1-1/2 4.6-4.2 / 2.1 MTSS-1P5-3BD18R location 2 6.6-6.0 / 3.0 MTSS-002-3BD18R 1/3 1.5-1.4 / 0.7 MTSS-P33-3BD18 1/2 1.55-1.5 / 0.75 MTSS-P50-3BD18 56C 3/4 1.15 B flange 2.6-2.4 / 1.2 MTSS-P75-3BD18 mount 1 3.5-3.2 / 1.6 MTSS-001-3BD18 TEFC stainless steel 1-1/2 4.6-4.2 / 2.1 MTSS-1P5-3BD18 frame with rigid 2 6.6-6.0 / 3.0 MTSS-002-3BD18 base 3600 RPM 3600 RPM 1/2 1.99-1.8 / 0.9 MTSS-P50-3BD36 F1 conduit box location 3/4 2.4-2.3 / 1.15 MTSS-P75-3BD36 1 3.3-3.0 / 1.5 MTSS-001-3BD36 1-1/2 4.2-4.0 / 2.0 MTSS-1P5-3BD36 2 5.0-4.8 / 2.4 MTSS-002-3BD36 Note: P lease review the AutomationDirect Terms & Conditions for warranty and service on this product. IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Approx Weight (lb) 27 27 29 34 36 43 28 28 30 35 36 44 29 31 31 36 43 Page 1–9 Chapter 1: Getting Started MTSS Stainless-Steel 56C-Frame 3-Phase Motors Features & Specs (continued) Motor Performance Data – 1800 rpm Performance Data MTSS Three-Phase 56C-Frame Motors – 1800 rpm (460V data except as indicated) Minimum Speed (rpm) CT VT (2:1) (5:1) F.L. RPM Part Number Maximum Speed (rpm) CHP* Current @ 460V (Amps) No Locked Load Rotor Safe MTSS-P33-3BD18(R) 1725 MTSS-P50-3BD18(R) 1725 MTSS-P75-3BD18(R) 1725 900 360 2250 4500 MTSS-001-3BD18(R) 1740 MTSS-1P5-3BD18(R) 1740 MTSS-002-3BD18(R) 1740 * Maximum Constant HP rpm is for direct-coupled loads. Part Number MTSS-P33-3BD18(R) MTSS-P50-3BD18(R) MTSS-P75-3BD18(R) MTSS-001-3BD18(R) MTSS-1P5-3BD18(R) MTSS-002-3BD18(R) Torque (lb·ft) Full Locked Break Load Rotor -down HP 1/3 1/2 3/4 1 1-1/2 2 1.0 1.5 2.2 3.0 4.4 5.9 2.9 3.8 5.0 7.2 10.3 13.9 3.9 5.2 7.0 9.9 14.5 18.9 0.29 0.30 0.44 0.61 0.70 1.08 4.2 4.6 7.3 10.0 13.8 21.0 F.L. Efficiency (%) F.L. Power Factor Rotor Inertia (lb·ft2) 82.5 82.5 82.5 84.0 84.0 84.0 0.71 0.76 0.78 0.78 0.83 0.83 0.078 0.078 0.081 0.090 0.087 0.101 Motor Performance Data – 3600 rpm Performance Data MTSS Three-Phase 56C-Frame Motors – 3600 rpm (460V data except as indicated) F.L. RPM Part Number Minimum Speed (rpm) CT VT (2:1) (5:1) Maximum Speed (rpm) CHP* Safe Current @ 460V (Amps) No Locked Load Rotor 3460 MTSS-P50-3BD36 3470 MTSS-P75-3BD36 3470 1800 720 4500 4500 MTSS-001-3BD36 3480 MTSS-1P5-3BD36 3480 MTSS-002-3BD36 * Maximum Constant HP rpm is for direct-coupled loads. Part Number MTSS-P50-3BD36 MTSS-P75-3BD36 MTSS-001-3BD36 MTSS-1P5-3BD36 MTSS-002-3BD36 Page 1–10 HP Full Load 1/2 3/4 1 1-1/2 2 0.7 1.1 1.5 2.3 2.9 Torque (lb·ft) Locked Break Rotor -down 1.9 2.7 4.6 6.6 8.6 2.5 3.3 5.5 9.0 11.3 0.36 0.43 0.58 0.70 0.85 6.0 7.6 10.0 15.0 18.0 F.L. Efficiency (%) F.L. Power Factor Rotor Inertia (lb·ft2) 77.0 73.0 80.0 84.0 80.0 0.88 0.84 0.72 0.74 0.72 0.077 0.100 0.094 0.098 0.107 IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Chapter 1: Getting Started MTCP Premium-Efficiency Cast-Iron Three-Phase Motors Features and Specifications Premium Effiency Cast-Iron T-Frame Premium Effiency Cast-Iron TC-Frame IronHorse cast-iron industrial-duty Premium Efficiency motors are available in T-frame housings in speeds of 1200, 1800, and 3600 rpm, and in TC-frame housings in speeds of 1800 rpm. Optional C-face kits are available for IronHorse T-frame Premium Efficiency motors. (Premium Efficiency C-face kits are NOT compatible with EPAct motors.) All models have a TEFC frame and full length mounting feet. Motor Specifications – Cast-Iron T-frame and TC-frame – 60Hz / 1800 rpm (50Hz / 1500 rpm) MTCP-002-3BD18C MTCP-003-3BD18 MTCP-003-3BD18C MTCP-005-3BD18 MTCP-005-3BD18C MTCP-7P5-3BD18 MTCP-7P5-3BD18C 2 3 5 7-1/2 145T 145TC 182T 182TC 184T 184TC 213T 213TC 3.22 / 1.61 (3.70 / 1.85) 41 4 4.64 / 2.32 (5.34 / 2.67) 47 4 6.00 / 3.00 (6.90 / 3.50) 56 8.05 / 4.02 (9.26 / 4.63) 84 2 Service Factor 2 Holes / Foot Conduit Box Location (1) Shaft Material Housing Voltage @ 60Hz (50Hz) 145T 145TC Product Weight (lb) MTCP-002-3BD18 1-1/2 F.L. Amps @ 230V/460V (200V/400V) MTCP-1P5-3BD18C 143T 143TC F1(F2) MTCP-1P5-3BD18 1 1045 carbon steel MTCP-001-3BD18C TEFC cast iron MTCP-001-3BD18 HP(2) 208-230/460 – 3-phase (200/400 – 3-phase) Part Number NEMA Frame Motor Specifications Premium-Efficiency T & TC Frame Three-Phase Motors 60Hz / 1800 rpm (50Hz / 1500 rpm) 1.15 (1.0) 4 13.4 / 6.71 (15.4 / 7.71) 2 18.7 / 9.34 (21.5 / 10.7) 45 50 60 92 99 107 150 154 1) F 1(F2) indicates F1 conduit box mounting location, field convertible to F2 (as shown on dimensional diagram). 2) F or warranty on motors 50 hp and above, motors must be inspected by an EASA motor repair or service center. See AutomationDirect Terms & Conditions for details. ***** Table Continued Next Page (for 10–200 hp motors) ***** IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Page 1–11 Chapter 1: Getting Started MTCP Premium-Efficiency Cast-Iron Three-Phase Motors Features and Specifications (continued) Motor Specifications – Cast-Iron T-frame and TC-frame – 60Hz / 1800 rpm (50Hz / 1500 rpm) (continued) ***** Table Continued From Previous Page (for 1–7.5hp motors) ***** MTCP-020-3BD18C MTCP-025-3BD18 MTCP-025-3BD18C MTCP-030-3BD18 MTCP-030-3BD18C MTCP-040-3BD18 MTCP-040-3BD18C MTCP-050-3BD18 (2) MTCP-050-3BD18C (2) MTCP-060-3BD18 (2) MTCP-060-3BD18C (2) MTCP-075-3BD18 (2) MTCP-075-3BD18C (2) MTCP-100-3BD18 (2) MTCP-100-3BD18C (2) 20 25 30 40 50 60 75 100 256T 256TC 284T 284TC 286T 286TC 324T 324TC 326T 326TC 364T 364TC 365T 365TC 405T 405TC 24.9 / 12.5 (28.6 / 14.3) 190 2 35.8 / 17.9 (41.2 / 20.6) 325 4 47.9 / 24.0 (55.1 / 27.6) 370 2 59.6 / 29.8 (68.5 / 34.3) 467 4 70.0 / 35.0 (80.5 / 40.2) 497 2 94.8 / 47.4 (109 / 54.5) 626 117 / 58.4 (134 / 67.2) 706 2 139 / 69.6 (160 / 80.1) 864 4 173 / 86.7 (199 / 99.7) 961 4 229 / 114 (263 / 132) 4 Service Factor 4 Holes / Foot Conduit Box Location (1) Shaft Material Housing Voltage @ 60Hz (50Hz) 254T 254TC Product Weight (lb) MTCP-020-3BD18 15 F.L. Amps @ 230V/460V (200V/400V) MTCP-015-3BD18C 215T 215TC F1(F2) MTCP-015-3BD18 10 1045 carbon steel MTCP-010-3BD18C TEFC cast iron MTCP-010-3BD18 HP (2) 208-230/460 – 3-phase (200/400 – 3-phase) Part Number NEMA Frame Motor Specifications Premium-Efficiency T & TC Frame Three-Phase Motors 60Hz / 1800 rpm (50Hz / 1500 rpm) 1.15 (1.0) 186 329 390 455 488 611 690 851 948 1199 1236 MTCP-125-3BD18 (2) 125 444T 2 285 / 143 (328 / 164) 1500 MTCP-150-3BD18 (2) 150 445T 4 342 / 171 (414 / 207) 1630 MTCP-200-3BD18 (2) 200 445/7T 4 453 / 227 (521 / 261) 2127 1) F 1(F2) indicates F1 conduit box mounting location, field convertible to F2 (as shown on dimensional diagram). 2) F or warranty on motors 50 hp and above, motors must be inspected by an EASA motor repair or service center. See AutomationDirect Terms & Conditions for details. Page 1–12 IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Chapter 1: Getting Started MTCP Premium-Efficiency Cast-Iron Three-Phase Motors Features and Specifications (continued) Motor Specifications – Cast-Iron T-frame and TC-frame – 60Hz / 1800 rpm (50Hz / 1500 rpm) (continued) Product Weight (lb) F.L. Amps @ 230V/460V (200V/400V) Service Factor Holes / Foot Conduit Box Location (1) Shaft Material Housing HP Voltage @ 60Hz (50Hz) Part Number NEMA Frame Motor Specifications Premium Efficiency T-Frame Three-Phase Motors 60Hz / 1200 & 3600 rpm (50Hz / 1000 & 3000 rpm) 1200 rpm Base Speed @ 60Hz (1000 rpm Base Speed @ 50Hz) 3.16 / 1.58 (3.63 / 1.82) 60 MTCP-1P5-3BD12 1-1/2 182T 2 4.46 / 2.23 (5.13 / 2.57) 104 MTCP-002-3BD12 2 184T 4 5.72 / 2.86 (6.58 / 3.29) 110 MTCP-003-3BD12 3 213T 2 8.48 / 4.24 (9.75 / 4.88) 160 MTCP-005-3BD12 5 215T 13.8 / 6.88 (15.8 / 7.91) 180 MTCP-7P5-3BD12 7-1/2 254T 2 20.9 / 10.4 (24.0 / 12.0) 325 MTCP-010-3BD12 10 256T 4 27.8 / 13.9 (32.0 / 16.0) 325 MTCP-015-3BD12 15 284T 2 40.3 / 20.2 (46.4 / 23.2) 420 MTCP-020-3BD12 20 286T 4 52.4 / 26.2 (60.2 / 30.1) 470 F1(F2) 4 1045 carbon steel 145T TEFC cast iron 1 208-230/460 – 3-phase (200/400 – 3-phase) MTCP-001-3BD12 4 1.15 (1.0) 3600 rpm Base Speed (3000 rpm Base Speed @ 50Hz) 4.08 / 2.04 (4.69 / 2.35) 44 MTCP-002-3BD36 2 145T 4 5.40 / 2.70 (6.20 / 3.10) 53 MTCP-003-3BD36 3 182T 2 7.74 / 3.87 (8.90 / 4.45) 79 MTCP-005-3BD36 5 184T 12.6 / 6.30 (14.5 / 7.25) 92 MTCP-7P5-3BD36 7-1/2 213T 18.5 / 9.23 (21.2 / 10.6) 140 MTCP-010-3BD36 10 215T 4 24.4 / 12.2 (28.1 / 14.1) 161 MTCP-015-3BD36 15 254T 2 35.0 / 17.5 (40.3 / 20.1) 278 MTCP-020-3BD36 20 256T 4 46.4 / 23.2 (53.4 / 26.7) 306 F1(F2) 2 1045 carbon steel 143T TEFC cast iron 1-1/2 208-230/460 – 3-phase (200/400 – 3-phase) MTCP-1P5-3BD36 4 2 1.15 (1.0) 1) F 1(F2) indicates F1 conduit box mounting location, field convertible to F2 (as shown on dimensional diagram). IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Page 1–13 Chapter 1: Getting Started MTCP Premium-Efficiency Cast-Iron Three-Phase Motors Features and Specifications (continued) Motor Performance Data – Cast-Iron T-frame and TC-frame – 60Hz / 1800 rpm 1 1750 86.3 0.690 0.089 1-1/2 1750 87.3 0.726 0.11 MTCP-002-3BD18(C) 2 1750 87.3 0.725 0.13 MTCP-003-3BD18(C) 3 1750 90.3 0.786 0.28 F.L. RPM MTCP-001-3BD18(C) MTCP-1P5-3BD18(C) Part Number HP Rotor Inertia (lb·ft2) Maximum Speed (rpm) F.L. Power Factor Minimum Speed (rpm) F.L. Efficiency (%) NEMA Design Performance Data @ 60Hz Premium-Efficiency T & TC Frame Three-Phase Motors – 1800 rpm (460 Volt except as indicated) CT (4:1) VT CHP(1) (10:1) Safe 5400 MTCP-005-3BD18(C) 5 1750 90.3 0.786 0.33 MTCP-7P5-3BD18(C) 7-1/2 1760 91.8 0.825 1.814 MTCP-010-3BD18(C) 10 1750 92.5 0.826 1.97 MTCP-015-3BD18(C) 15 1750 92.5 0.890 3.33 MTCP-020-3BD18(C) 20 93.8 0.846 4.09 MTCP-025-3BD18(C) 25 93.6 0.860 7.01 MTCP-030-3BD18(C) 30 1780 93.7 0.846 8.3 MTCP-040-3BD18(C) 40 1780 94.4 0.850 9 MTCP-050-3BD18(C) 50 1775 94.5 0.855 14.1 MTCP-060-3BD18(C) 60 1788 95.0 0.850 16.27 MTCP-075-3BD18(C) 75 1787 95.4 0.850 18.8 MTCP-100-3BD18(C) 100 1790 95.4 0.860 45.5 MTCP-125-3BD18 125 1790 95.4 0.860 65.1 MTCP-150-3BD18 150 1790 95.8 0.860 69.26 MTCP-200-3BD18 200 1790 96.3 0.860 84.0 1770 B 1770 450 180 2700 4200 1) Maximum Constant HP RPM is for direct-coupled loads. *** TABLE CONTINUED NEXT PAGE *** Page 1–14 IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Chapter 1: Getting Started MTCP Premium-Efficiency Cast-Iron Three-Phase Motors Features and Specifications (continued) Motor Performance Data – Cast-Iron T-frame and TC-frame – 60Hz / 1800 rpm (continued) ***** Table Continued From Previous Page ***** Performance Data @ 60Hz Premium-Efficiency T & TC Frame Three-Phase Motors – 1800 rpm (460 Volt except as indicated) Part Number Current @ 230V/460V (Amps) Torque (lb·ft) HP No Load Full Load Locked Rotor Full Load Locked Rotor Break -down MTCP-001-3BD18(C) 1 2.3 / 1.1 3.2 / 1.6 30.0 / 15.0 3.0 9.0 11.4 MTCP-1P5-3BD18(C) 1-1/2 3.1 / 1.6 4.6 / 2.3 40.0 / 20.0 4.5 9.0 14.0 MTCP-002-3BD18(C) 2 3.6 / 1.8 6.0 / 3.0 50.0 / 25.0 6.0 17.4 19.2 MTCP-003-3BD18(C) 3 4.1 / 2.1 8.1 / 4.0 64.0 / 32.0 9.0 20.7 25.2 MTCP-005-3BD18(C) 5 6.2 / 3.1 13.4 / 6.7 92.0 / 46.0 15.0 34.5 43.5 MTCP-7P5-3BD18(C) 7-1/2 8.4 / 4.2 18.7 / 9.3 127 / 63.5 22.4 44.8 69.4 MTCP-010-3BD18(C) 10 10.5 / 5.3 24.9 / 12.5 163 / 81.5 30.0 61.5 93.0 MTCP-015-3BD18(C) 15 15.4 / 7.7 35.8 / 17.9 232 / 116 45 92 126 MTCP-020-3BD18(C) 20 17.1 / 8.6 47.9 / 24.0 290 / 145 59.4 118.8 166.3 MTCP-025-3BD18(C) 25 24 / 12 59.6 / 29.8 365 / 182.5 74.2 155.8 185.5 MTCP-030-3BD18(C) 30 27 / 13.5 70.0 / 35.0 435 / 217.5 88.6 203.8 248.1 MTCP-040-3BD18(C) 40 29.6 / 14.8 94.8 / 47.4 580 / 290 118.1 248.0 271.6 MTCP-050-3BD18(C) 50 36.2 / 18.1 116.8 / 58.4 725 / 362.5 148 326 414 MTCP-060-3BD18(C) 60 45.6 / 22.8 139.3 / 69.6 870 / 435 179 376 519 MTCP-075-3BD18(C) 75 58.4 / 29.2 173.4 / 86.7 1085 / 542.5 221 464 619 MTCP-100-3BD18(C) 100 75 / 37.5 228.6 / 114.3 1450 / 725 293.2 645.0 703.7 MTCP-125-3BD18 125 94.5 / 47.3 285.2 / 142.6 1816 / 908 367 624 918 MTCP-150-3BD18 150 104.4 / 52.2 342 / 171 2170 / 1085 443 797 1108 MTCP-200-3BD18 200 133.3 / 66.6 453.2 / 226.6 2900 / 1450 587 1174 1644 *** TABLE CONTINUED NEXT PAGE *** IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Page 1–15 Chapter 1: Getting Started MTCP Premium-Efficiency Cast-Iron Three-Phase Motors Features and Specifications (continued) Motor Performance Data – Cast-Iron T-frame and TC-frame – 60Hz / 1800 rpm (continued) ***** Table Continued From Previous Page ***** Performance Data @ 60Hz Premium-Efficiency T & TC Frame Three-Phase Motors 1800 rpm – (460 Volt except as indicated) HP Slip (%) MTCP-001-3BD18(C) 1 1.81 MTCP-1P5-3BD18(C) 1-1/2 2.80 MTCP-002-3BD18(C) 2 2.80 MTCP-003-3BD18(C) 3 1.60 MTCP-005-3BD18(C) 5 2.00 MTCP-7P5-3BD18(C) 7-1/2 1.54 MTCP-010-3BD18(C) 10 1.31 MTCP-015-3BD18(C) 15 1.22 MTCP-020-3BD18(C) 20 1.70 MTCP-025-3BD18(C) 25 1.67 MTCP-030-3BD18(C) 30 1.10 MTCP-040-3BD18(C) 40 1.11 MTCP-050-3BD18(C) 50 0.78 MTCP-060-3BD18(C) 60 0.66 MTCP-075-3BD18(C) 75 0.69 MTCP-100-3BD18(C) 100 0.56 MTCP-125-3BD18 125 0.56 MTCP-150-3BD18 150 0.53 MTCP-200-3BD18 200 0.52 Part Number Page 1–16 Max Time @ Locked Rotor Current (hot) Temperature Rise @ Full Load 20 seconds 80°C [176°F] 13 seconds 20 seconds 18 seconds IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Chapter 1: Getting Started MTCP Premium-Efficiency Three-Phase Motors Features & Specs (continued) Motor Performance Data – Cast-Iron T-frame – 60Hz / 1200 rpm Part Number HP MTCP-001-3BD12 1 MTCP-1P5-3BD12 1-1/2 MTCP-002-3BD12 2 MTCP-003-3BD12 3 MTCP-005-3BD12 5 MTCP-7P5-3BD12 7-1/2 MTCP-010-3BD12 10 MTCP-015-3BD12 15 MTCP-020-3BD12 20 Part Number HP NEMA Design Performance Data @ 60Hz – Premium Efficiency T-Frame 3-Phase Motors – 1200 rpm – (460 Volt except as indicated) F.L. RPM Minimum Speed (rpm) Maximum Speed (rpm) Constant Torque (4:1) Variable Torque (10:1) CHP(2) Safe 300 120 1800 3600 1162 B 1180 Current @ 230V/460V (Amps) No Load Full Load Locked Rotor Torque (lb·ft) Full Load Locked Rotor Breakdown MTCP-001-3BD12 1 2.5 / 1.25 3.2 / 1.6 30 / 15 4.5 10.8 14.4 MTCP-1P5-3BD12 1-1/2 3.2 / 1.6 4.5 / 2.2 40 / 20 6.68 15.36 21.38 MTCP-002-3BD12 2 4.2 / 2.1 5.7 / 2.9 50.0 / 25.0 8.61 20.66 29.88 MTCP-003-3BD12 3 6.4 / 3.2 8.5 / 4.2 68.0 / 34.0 13.36 29.39 40.08 MTCP-005-3BD12 5 9.2 / 4.6 13.8 / 6.9 92.0 / 46.0 22.2 48.8 66.6 MTCP-7P5-3BD12 7-1/2 12.0 / 6.0 20.9 / 10.4 127 / 63.5 33.4 76.8 116.9 MTCP-010-3BD12 10 10.8 / 5.4 27.8 / 13.9 162 / 81 44.5 97.9 106.8 MTCP-015-3BD12 15 18.0 / 9.0 40.3 / 20.2 232 / 116 60.23 132.51 174.67 MTCP-020-3BD12 20 17.8 / 8.9 52.4 / 26.2 290 / 145 89.1 196.0 258.4 HP Temperature Rise @ Full Load Max Time Locked Rotor (Hot) F.L. Efficiency (%) F.L. Power Factor Rotor Inertia (lb·ft2) Slip (%) Part Number MTCP-001-3BD12 1 82.5 0.72 0.33 3.14 MTCP-1P5-3BD12 1-1/2 87.5 0.72 0.36 1.85 MTCP-002-3BD12 2 88.5 0.74 0.47 2.0 MTCP-003-3BD12 3 89.5 0.74 0.50 1.65 MTCP-005-3BD12 5 MTCP-7P5-3BD12 7-1/2 MTCP-010-3BD12 MTCP-015-3BD12 MTCP-020-3BD12 80°C [176°F] 20 seconds 89.5 0.76 1.97 1.85 91.1 0.74 2.74 1.51 10 91.0 0.74 2.98 1.56 15 91.7 0.76 5.49 1.16 20 91.7 0.78 12.9 1.21 2) Maximum Constant HP RPM is for direct-coupled loads. IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Page 1–17 Chapter 1: Getting Started MTCP Premium-Efficiency Three-Phase Motors Features & Specs (continued) Motor Performance Data – Cast-Iron T-frame – 60Hz / 3600 rpm Part Number HP NEMA Design Performance Data @ 60Hz – Premium Efficiency T-Frame 3-Phase Motors – 3600 rpm – (460 Volt except as indicated) F.L. RPM MTCP-1P5-3BD36 1-1/2 3570 MTCP-002-3BD36 2 3520 MTCP-003-3BD36 3 3520 MTCP-005-3BD36 5 MTCP-7P5-3BD36 7-1/2 MTCP-010-3BD36 10 3550 MTCP-015-3BD36 15 3550 MTCP-020-3BD36 20 3570 Part Number HP B 3570 3520 Minimum Speed (rpm) Maximum Speed (rpm) Constant Torque (4:1) Variable Torque (10:1) CHP(2) Safe 900 360 5400 5400 Current @ 230V/460V (Amps) No Load Full Load Locked Rotor Torque (lb·ft) Full Load Locked Rotor Breakdown 2.2 6.4 7.9 MTCP-1P5-3BD36 1-1/2 2.0 / 1.0 4.1 / 2.0 40.0 / 20.0 MTCP-002-3BD36 2 3.1 / 1.6 5.4 / 2.7 50.0 / 25.0 3.0 9.0 12.0 MTCP-003-3BD36 3 3.9 / 2.0 7.7 / 3.9 64.0 / 32.0 4.48 12.54 17.02 MTCP-005-3BD36 5 5.2 / 2.6 12.6 / 6.3 92.0 / 46.0 7.36 16.19 22.82 MTCP-7P5-3BD36 7-1/2 6.7 / 3.3 18.5 / 9.2 127 / 63.5 11.2 28.0 34.7 MTCP-010-3BD36 10 8.8 / 4.4 24.4 / 12.2 163 / 81.5 14.8 37.0 50.3 MTCP-015-3BD36 15 12 / 6 35.0 / 17.5 232 / 116 22.2 46.6 64.4 MTCP-020-3BD36 20 15 / 7.5 46.4 / 23.2 290 / 145 29.4 61.7 85.3 Temper-ature Max Time Rise @ Locked Full Load Rotor (Hot) F.L. Efficiency (%) F.L. Power Factor Rotor Inertia (lb·ft2) Slip (%) Part Number HP MTCP-1P5-3BD36 1-1/2 85.5 0.83 0.08 2.00 MTCP-002-3BD36 2 86.6 0.82 0.10 2.20 MTCP-003-3BD36 3 87.0 0.85 0.20 1.60 MTCP-005-3BD36 5 89.0 0.84 0.22 1.46 MTCP-7P5-3BD36 7-1/2 89.7 0.85 0.50 1.67 MTCP-010-3BD36 10 90.3 0.85 1.2 1.40 MTCP-015-3BD36 15 91.2 0.85 1.86 1.11 MTCP-020-3BD36 20 91.2 0.85 2.01 0.97 80°C [176°F] 20 seconds 2) Maximum Constant HP RPM is for direct-coupled loads Page 1–18 IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Chapter 1: Getting Started MTCP Premium-Efficiency Cast-Iron Three-Phase Motors Features and Specifications (continued) Motor Performance Data – Cast-Iron T-frame and TC-frame – 50Hz / 1500rpm 1 1453 86.3 0.690 0.089 MTCP-1P5-3BD18(C) 1.5 1453 87.3 0.726 0.11 MTCP-002-3BD18(C) 2 1453 87.3 0.725 0.13 MTCP-003-3BD18(C) 3 1453 90.3 0.786 0.28 F.L. RPM MTCP-001-3BD18(C) Part Number HP Rotor Inertia (lb·ft2) Maximum Speed (rpm) F.L. Power Factor Minimum Speed (rpm) F.L. Efficiency (%) NEMA Design Performance Data @ 50Hz Premium-Efficiency T & TC Frame Three-Phase Motors – 1500 rpm (400 Volt except as indicated) CT VT CHP(1) Safe 5400 MTCP-005-3BD18(C) 5 1453 90.3 0.786 0.33 MTCP-7P5-3BD18(C) 7-1/2 1461 91.8 0.825 1.814 MTCP-010-3BD18(C) 10 1453 92.5 0.826 1.97 MTCP-015-3BD18(C) 15 1453 92.5 0.890 3.33 MTCP-020-3BD18(C) 20 93.8 0.846 4.09 MTCP-025-3BD18(C) 25 93.6 0.860 7.01 MTCP-030-3BD18(C) 30 1477 93.7 0.846 8.3 MTCP-040-3BD18(C) 40 1477 94.4 0.850 9 MTCP-050-3BD18(C) 50 1473 94.5 0.855 14.1 MTCP-060-3BD18(C) 60 1484 95.0 0.850 16.27 MTCP-075-3BD18(C) 75 1483 95.4 0.850 18.8 MTCP-100-3BD18(C) 100 1486 95.4 0.860 45.5 MTCP-125-3BD18 125 1486 95.4 0.860 65.1 MTCP-150-3BD18 150 1486 95.8 0.860 69.26 MTCP-200-3BD18 200 1486 96.3 0.860 84.0 1469 B 1469 450 180 2700 4200 1) Maximum Constant HP RPM is for direct-coupled loads. *** TABLE CONTINUED NEXT PAGE *** IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Page 1–19 Chapter 1: Getting Started MTCP Premium-Efficiency Cast-Iron Three-Phase Motors Features and Specifications (continued) Motor Performance Data – Cast-Iron T-frame and TC-frame – 50Hz / 1500rpm ***** Table Continued From Previous Page ***** Performance Data @ 50Hz Premium-Efficiency T & TC Frame Three-Phase Motors – 1500 rpm (400 Volt except as indicated) Current @ 200V/400V (Amps) Part Number HP No Load Full Load Locked Rotor Torque (lb·ft) Full Load Locked Rotor Break -down MTCP-001-3BD18(C) 1 2.62 / 1.31 3.70 / 1.85 34.5 / 17.3 3.61 10.8 13.7 MTCP-1P5-3BD18(C) 1-1/2 3.59 / 1.80 5.34 / 2.67 46.0 / 23.0 5.40 10.8 16.7 MTCP-002-3BD18(C) 2 4.10 / 2.10 6.90 / 3.50 57.5 / 28.8 7.20 20.9 23.0 MTCP-003-3BD18(C) 3 4.70 / 2.35 9.26 / 4.63 73.6 / 36.8 10.8 24.8 30.2 MTCP-005-3BD18(C) 5 7.13 / 3.57 15.42 / 7.71 106 / 52.9 18.1 41.6 52.5 MTCP-7P5-3BD18(C) 7-1/2 9.71 / 4.86 21.5 / 10.7 146 / 73.0 27.0 54.0 83.7 MTCP-010-3BD18(C) 10 12.1 / 6.06 28.6 / 14.3 187 / 93.7 36.1 74.0 112 MTCP-015-3BD18(C) 15 17.7 / 8.85 41.2 / 20.6 267 / 133 54.2 111 152 MTCP-020-3BD18(C) 20 19.7 / 9.84 55.1 / 27.6 334 / 167 71.5 143 200 MTCP-025-3BD18(C) 25 27.6 / 13.8 68.5 / 34.3 420 / 210 89.4 188 224 MTCP-030-3BD18(C) 30 31.1 / 15.5 80.5 / 40.2 500 / 250 107 246 300 MTCP-040-3BD18(C) 40 34.0 / 17.0 109 / 54.5 667 / 334 142 298 327 MTCP-050-3BD18(C) 50 41.6 / 20.8 134 / 67.2 834 / 417 178 392 498 MTCP-060-3BD18(C) 60 52.4 / 26.2 160 / 80.1 1001 / 500 212 445 615 MTCP-075-3BD18(C) 75 67.2 / 33.6 199 / 99.7 1248 / 624 266 559 745 MTCP-100-3BD18(C) 100 86.3 / 43.1 263 / 132 1668 / 834 353 777 847 MTCP-125-3BD18 125 109 / 54.4 328 / 164 2088 / 1044 442 751 1105 MTCP-150-3BD18 150 126 / 63.2 414 / 207 2627 / 1314 530 954 1325 MTCP-200-3BD18 200 153 / 77 521 / 261 3335 / 1668 707 1414 1980 *** TABLE CONTINUED NEXT PAGE *** Page 1–20 IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Chapter 1: Getting Started MTCP Premium-Efficiency Cast-Iron Three-Phase Motors Features and Specifications (continued) Motor Performance Data – Cast-Iron T-frame and TC-frame – 50Hz / 1500 rpm (continued) ***** Table Continued From Previous Page ***** Performance Data @ 50Hz Premium-Efficiency T & TC Frame Three-Phase Motors 1500 rpm – (400 Volt except as indicated) HP Slip (%) MTCP-001-3BD18(C) 1 1.81 MTCP-1P5-3BD18(C) 1-1/2 2.80 MTCP-002-3BD18(C) 2 2.80 MTCP-003-3BD18(C) 3 1.60 MTCP-005-3BD18(C) 5 2.00 MTCP-7P5-3BD18(C) 7-1/2 1.54 MTCP-010-3BD18(C) 10 1.31 MTCP-015-3BD18(C) 15 1.22 MTCP-020-3BD18(C) 20 1.70 MTCP-025-3BD18(C) 25 1.67 MTCP-030-3BD18(C) 30 1.10 MTCP-040-3BD18(C) 40 1.11 MTCP-050-3BD18(C) 50 0.78 MTCP-060-3BD18(C) 60 0.66 MTCP-075-3BD18(C) 75 0.69 MTCP-100-3BD18(C) 100 0.56 MTCP-125-3BD18 125 0.56 MTCP-150-3BD18 150 0.53 MTCP-200-3BD18 200 0.52 Part Number Max Time @ Locked Rotor Current (hot) Temperature Rise @ Full Load 20 seconds 80°C [176°F] 13 seconds 20 seconds 18 seconds IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Page 1–21 Chapter 1: Getting Started MTCP Premium-Efficiency Three-Phase Motors Features & Specs (continued) Motor Performance Data – Cast-Iron T-frame – 50Hz / 1000 rpm Part Number HP MTCP-001-3BD12 1 MTCP-1P5-3BD12 1-1/2 MTCP-002-3BD12 2 MTCP-003-3BD12 3 MTCP-005-3BD12 5 MTCP-7P5-3BD12 7-1/2 MTCP-010-3BD12 10 MTCP-015-3BD12 15 MTCP-020-3BD12 20 Part Number HP NEMA Design Performance Data @ 50Hz – Premium Efficiency T-Frame 3-Phase Motors – 1000 rpm – (400 Volt except as indicated) F.L. RPM Minimum Speed (rpm) Maximum Speed (rpm) Constant Torque Variable Torque CHP(2) Safe 300 120 1800 3600 964 B 979 Current @ 200V/400V (Amps) No Load Full Load Locked Rotor Torque (lb·ft) Full Load Locked Rotor Breakdown MTCP-001-3BD12 1 2.88 / 1.44 3.63 / 1.82 34.5 / 17.3 5.40 13.0 17.3 MTCP-1P5-3BD12 1-1/2 3.70 / 1.85 5.13 / 2.57 46.0 / 23.0 8.04 18.5 25.7 MTCP-002-3BD12 2 4.83 / 2.42 6.58 / 3.29 57.5 / 28.8 10.7 25.7 37.1 MTCP-003-3BD12 3 7.36 / 3.68 9.75 / 4.88 78.2 / 39.1 16.1 35.4 48.3 MTCP-005-3BD12 5 10.6 / 5.29 15.8 / 7.91 106 / 52.9 26.8 59.0 80.4 MTCP-7P5-3BD12 7-1/2 13.8 / 6.90 24.0 / 12.0 146 / 73.0 40.2 92.5 141 MTCP-010-3BD12 10 12.4 / 6.21 32.0 / 16.0 186 / 93.2 53.6 118 129 MTCP-015-3BD12 15 20.7 / 10.4 46.4 / 23.2 267 / 133 80.4 177 233 MTCP-020-3BD12 20 20.4 / 10.2 60.2 / 30.1 334 / 167 107 235 310 HP Temperature Rise @ Full Load Max Time Locked Rotor (Hot) F.L. Efficiency (%) F.L. Power Factor Rotor Inertia (lb·ft2) Slip (%) Part Number MTCP-001-3BD12 1 82.5 0.72 0.33 3.14 MTCP-1P5-3BD12 1-1/2 87.5 0.72 0.36 1.85 MTCP-002-3BD12 2 88.5 0.74 0.47 2.00 MTCP-003-3BD12 3 89.5 0.74 0.50 1.65 MTCP-005-3BD12 5 89.5 0.76 1.97 1.85 MTCP-7P5-3BD12 7-1/2 91.1 0.74 2.74 1.51 MTCP-010-3BD12 10 91.0 0.74 2.98 1.56 MTCP-015-3BD12 15 91.7 0.76 5.49 1.16 MTCP-020-3BD12 20 91.7 0.78 12.9 1.21 80°C [176°F] 20 seconds 2) Maximum Constant HP RPM is for direct-coupled loads. Page 1–22 IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Chapter 1: Getting Started MTCP Premium-Efficiency Three-Phase Motors Features & Specs (continued) Motor Performance Data – Cast-Iron T-frame – 50Hz / 3000 rpm Part Number HP NEMA Design Performance Data @ 50Hz – Premium Efficiency T-Frame 3-Phase Motors – 3000 rpm – (400 Volt except as indicated) F.L. RPM MTCP-1P5-3BD36 1-1/2 2963 MTCP-002-3BD36 2 2922 MTCP-003-3BD36 3 2922 MTCP-005-3BD36 5 MTCP-7P5-3BD36 7-1/2 MTCP-010-3BD36 10 2947 MTCP-015-3BD36 15 2947 MTCP-020-3BD36 20 2963 Part Number HP B 2963 2922 Minimum Speed (rpm) Maximum Speed (rpm) Constant Torque Variable Torque CHP(2) Safe 1800 720 5400 5400 Current @ 200V/400V (Amps) Torque (lb·ft) No Load Full Load Locked Rotor Full Load Locked Rotor Breakdown MTCP-1P5-3BD36 1-1/2 2.30 / 1.20 4.69 / 2.35 46.0 / 23.0 2.66 7.71 9.58 MTCP-002-3BD36 2 3.60 / 1.80 6.20 / 3.10 57.5 / 28.8 3.60 10.8 14.4 MTCP-003-3BD36 3 4.49 / 2.25 8.90 / 4.45 73.6 / 36.8 5.39 15.1 20.5 MTCP-005-3BD36 5 5.98 / 2.99 14.5 / 7.25 106 / 46.0 8.88 19.5 27.5 MTCP-7P5-3BD36 7-1/2 7.66 / 3.83 21.2 / 10.6 146 / 73.0 13.5 33.7 41.8 MTCP-010-3BD36 10 10.1 / 5.04 28.1 / 14.1 188 / 93.8 17.8 44.5 60.5 MTCP-015-3BD36 15 13.8 / 6.90 40.3 / 20.1 267 / 133 26.7 56.1 77.4 MTCP-020-3BD36 20 17.3 / 8.63 53.4 / 26.7 334 / 167 35.4 74.4 103 HP Temperature Rise @ Full Load Max Time Locked Rotor (Hot) F.L. Efficiency (%) F.L. Power Factor Rotor Inertia (lb·ft2) Slip (%) Part Number MTCP-1P5-3BD36 1-1/2 85.5 0.83 0.08 2.00 MTCP-002-3BD36 2 86.6 0.82 0.10 2.20 MTCP-003-3BD36 3 87.0 0.85 0.20 1.60 MTCP-005-3BD36 5 89.0 0.84 0.22 1.46 MTCP-7P5-3BD36 7-1/2 89.7 0.85 0.50 1.67 MTCP-010-3BD36 10 90.3 0.85 1.20 1.40 MTCP-015-3BD36 15 91.2 0.85 1.86 1.11 MTCP-020-3BD36 20 91.2 0.85 2.01 0.97 80°C [176°F] 20 seconds 2) Maximum Constant HP RPM is for direct-coupled loads IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Page 1–23 Chapter 1: Getting Started MTC EPAct Cast-Iron Three-Phase Motors Features and Specifications EPAct Cast-Iron T-Frame EPAct Cast-Iron TC-Frame IronHorse 1800 rpm T-frame cast-iron industrial duty EPAct motors are available from 1–300 hp, and TC-frame motors are available from 1–100 hp. Optional C-face kits are available for IronHorse T-frame EPAct motors. (EPAct C-face kits are NOT compatible with Premium Efficiency motors.) All models have a TEFC frame and full length mounting feet. Motor Specifications – Cast-Iron T-frame and TC-frame – 1800 rpm MTC-1P5-3BD18CK (1) MTC-002-3BD18 MTC-002-3BD18CK (1) MTC-003-3BD18 MTC-003-3BD18CK (1) MTC-005-3BD18 MTC-005-3BD18CK (1) MTC-7P5-3BD18 MTC-7P5-3BD18CK (1) 1-1/2 2 3 5 7-1/2 145T 145TC 145T 145TC 182T 182TC 184T 184TC 213T 213TC 2 3.0 / 1.5 3 4.2 / 2.1 3 5.4 / 2.7 1.15 2 7.72 / 3.86 3 11.8 / 5.9 2 18.6 / 9.3 Product Weight (lb) F.L. Amps @ 230V/460V Service Factor Holes / Foot Conduit Box Location (2) Shaft Material Housing Voltage 143T 143TC F1(F2) MTC-1P5-3BD18 1 1045 CS MTC-001-3BD18CK (1) TEFC cast iron MTC-001-3BD18 HP(3) 208-230/460 – 3-phase Part Number NEMA Frame Motor Specifications – EPAct T & TC(1) Frame Three-Phase Motors – 1800 rpm 58 61 60 67 70 69 90 112 110 125 160 170 1) TC-frame motors are T-frame motors with applicable C-face accessory kits installed. 2) F 1(F2) indicates F1 conduit box mounting location, field convertible to F2. (Refer to “Chapter 5: Reference” for further information regarding F1 and F2 mounting.) 3) F or warranty on motors 50 hp and above, motors must be inspected by an EASA motor repair or service center. See AutomationDirect Terms & Conditions for details. *** TABLE CONTINUED ON NEXT PAGE *** Page 1–24 IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Chapter 1: Getting Started MTC EPAct Cast-Iron 3-Phase Motors Features and Specs (continued) Motor Specifications – Cast-Iron T-frame and TC-frame – 1800 rpm ***** Table Continued From Previous Page (for 1–7.5hp motors) ***** MTC-020-3BD18 MTC-020-3BD18CK (1) MTC-025-3BD18 MTC-025-3BD18CK (1) MTC-030-3BD18 MTC-030-3BD18CK (1) MTC-040-3BD18 MTC-040-3BD18CK (1) MTC-050-3BD18 (3) MTC-050-3BD18CK (1)(3) MTC-060-3BD18 (3) MTC-060-3BD18CK (1)(3) MTC-075-3BD18 (3) MTC-075-3BD18CK (1)(3) MTC-100-3BD18 (3) MTC-100-3BD18CK (1)(3) 15 20 25 30 40 50 60 75 100 254T 254TC 256T 256TC 284T 284TC 286T 286TC 324T 324TC 326T 326TC 364T 24.8 / 12.4 F1(F2) 2 35.4 / 17.7 F1(F2) 3 47.6 / 23.8 F1 2 56.4 / 28.2 F1 3 67.2 / 33.6 F1 2 93.0 / 46.5 F1 F1 364TC 365T F1 365TC 405T 3 2 3 1.15 114.6 / 57.3 139.4 / 69.7 172.8 / 86.4 Product Weight (lb) 3 F.L. Amps @ 230V/460V F1(F2) Service Factor Shaft Material Housing Voltage 215TC Holes / Foot MTC-015-3BD18CK (1) 215T Conduit Box Location (2) MTC-015-3BD18 10 1045 CS MTC-010-3BD18CK (1) TEFC cast iron MTC-010-3BD18 HP (3) 208-230/460 – 3-phase Part Number NEMA Frame Motor Specifications – EPAct T & TC(1) Frame Three-Phase Motors – 1800 rpm 179 198 290 310 326 360 400 440 451 470 589 608 640 652 780 780 870 837 1350 F1 3 230 / 115 444T F1(F2) 2 274 / 137 1500 405TC 1335 MTC-150-3BD18 (3) 150 445T F1(F2) 3 326 / 163 1630 MTC-200-3BD18 (3) 200 445/7T F1(F2) 3 446 / 223 1858 MTC-250-3D18 (3) 250 449T 449T 2 2508 300 F1 – / 282 MTC-300-3D18 (3) – / 334 2728 4140 CS 125 460 MTC-125-3BD18 (3) 1) TC-frame motors are T-frame motors with applicable C-face accessory kits installed. 2) F 1(F2) indicates F1 conduit box mounting location, field convertible to F2. (Refer to “Chapter 5: Reference” for further information regarding F1 and F2 mounting.) 3) F or warranty on motors 50 hp and above, motors must be inspected by an EASA motor repair or service center. See AutomationDirect Terms & Conditions for details. IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Page 1–25 Chapter 1: Getting Started MTC EPAct Cast-Iron 3-Phase Motors Features and Specs (continued) Motor Specifications – Cast-Iron T-frame – 1200 & 3600 rpm Product Weight (lb) 4 3.2 / 1.6 62 MTC-1P5-3BD12 1-1/2 182T 2 4.8 / 2.4 106 MTC-002-3BD12 2 184T 4 6.1 / 3.1 119 MTC-003-3BD12 3 213T MTC-005-3BD12 5 215T MTC-7P5-3BD12 7-1/2 254T MTC-010-3BD12 10 256T MTC-1P5-3BD36 1-1/2 MTC-002-3BD36 MTC-003-3BD36 Service Factor F.L. Amps @ 230V/460V Holes / Foot 145T Shaft Material 1 Housing MTC-001-3BD12 Part Number Voltage HP (3) NEMA Frame Conduit Box Location (2) Motor Specifications – EPAct T-Frame Three-Phase Motors – 1200 & 3600 rpm 1045 carbon steel TEFC cast iron 208-230/460 3-phase 1200 rpm Base Speed F1(F2) 2 1.15 8.4 / 4.2 171 4 13.6 / 6.8 189 2 21.2 / 10.6 272 4 28.0 / 14.0 307 143T 2 3.8 / 1.9 62 2 145T 4 5.0 / 2.5 66 3 182T 2 7.2 / 3.6 107 MTC-005-3BD36 5 184T MTC-7P5-3BD36 7-1/2 213T MTC-010-3BD36 10 215T 1045 carbon steel TEFC cast iron 208-230/460 3-phase 3600 rpm Base Speed F1(F2) 4 1.15 11.3 / 5.7 112 2 16.8 / 8.4 165 4 22.4 / 11.2 185 2) F 1(F2) indicates F1 conduit box mounting location, field convertible to F2. (Refer to “Chapter 5: Reference” for further information regarding F1 and F2 mounting.) 3) F or warranty on motors 50 hp and above, motors must be inspected by an EASA motor repair or service center. See AutomationDirect Terms & Conditions for details. Page 1–26 IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Chapter 1: Getting Started MTC EPAct Cast-Iron 3-Phase Motors Features and Specs (continued) Motor Performance Data – Cast-Iron T-Frame and TC-frame – 1800 rpm 1 1760 5400 82.5 0.71 0.068 MTC-1P5-3BD18(CK) 1-1/2 1755 5400 84.0 0.74 0.083 MTC-002-3BD18(CK) 2 1750 5400 84.0 0.77 0.09 MTC-003-3BD18(CK) 3 1750 5400 87.5 0.81 0.22 MTC-005-3BD18(CK) 5 1750 5400 87.5 0.84 0.285 MTC-7P5-3BD18(CK) 7-1/2 1760 5400 89.5 0.81 0.602 MTC-010-3BD18(CK) 10 1760 4200 89.5 0.83 0.742 MTC-015-3BD18(CK) 15 1770 4200 91.0 0.83 1.71 MTC-020-3BD18(CK) 20 1770 4200 91.0 0.84 2.18 MTC-025-3BD18(CK) 25 4200 92.4 0.87 3.3 MTC-030-3BD18(CK) 30 1775 4200 92.4 0.86 3.76 MTC-040-3BD18(CK) 40 1775 3600 93.0 0.86 5.84 MTC-050-3BD18(CK) 50 1775 3600 93.0 0.86 6.34 MTC-060-3BD18(CK) 60 1785 3600 93.6 0.85 11.4 MTC-075-3BD18(CK) 75 1785 3600 94.1 0.84 12.7 MTC-100-3BD18(CK) 100 1785 2800 94.5 0.87 28.5 MTC-125-3BD18 125 1785 2800 94.5 0.86 38.9 MTC-150-3BD18 150 1785 2800 95.0 0.87 47.2 MTC-200-3BD18 200 1785 2800 95.0 0.87 62.3 MTC-250-3D18 250 1790 2800 95.9 0.87 86.0 MTC-300-3D18 300 1790 2800 95.7 0.88 105.0 B A B F.L. RPM MTC-001-3BD18(CK) Part Number HP Rotor Inertia (lb·ft2) Maximum Speed (rpm) F.L. Power Factor Minimum Speed (rpm) F.L. Efficiency (%) NEMA Design Performance Data – EPAct T & TC(1) Frame Three-Phase Motors – 1800 rpm (460 Volt except as indicated) CT (2:1) VT (5:1) CHP(2) 1775 900 360 2700 Safe 1) TC-frame motors (MTC-xxx-xxxxCK) are T-frame motors with applicable C-face accessory kits installed. 2) Maximum Constant HP RPM is for direct-coupled loads. *** TABLE CONTINUED NEXT PAGE *** IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Page 1–27 Chapter 1: Getting Started MTC EPAct Cast-Iron 3-Phase Motors Features and Specs (continued) Motor Performance Data – Cast-Iron T-Frame and TC-frame – 1800 rpm ***** Table Continued From Previous Page ***** Performance Data – EPAct T & TC(1) Frame 3-Phase Motors – 1800 rpm (460 Volt except as indicated) Current @ 230V/460V (Amps) Part Number Torque (lb·ft) HP No Load Full Load Locked Rotor Full Load Locked Rotor Break -down MTC-001-3BD18(CK) 1 1.9 / 0.95 3.0 / 1.5 30.0 / 15.0 3.00 7.50 10.50 MTC-1P5-3BD18(CK) 1-1/2 2.44 / 1.22 4.2 / 2.1 40.0 / 20.0 4.41 10.58 14.11 MTC-002-3BD18(CK) 2 2.76 / 1.38 5.4 / 2.7 50.0 / 25.0 6.05 13.92 17.55 MTC-003-3BD18(CK) 3 3.74 / 1.87 7.72 / 3.86 64.0 / 32.0 9.07 25.40 29.93 MTC-005-3BD18(CK) 5 5.1 / 2.55 11.8 / 5.9 92.0 / 46.0 15.1 40.8 46.8 MTC-7P5-3BD18(CK) 7-1/2 8.98 / 4.49 18.6 / 9.3 127 / 63.5 22.0 44.0 72.6 MTC-010-3BD18(CK) 10 13.0 / 6.5 24.8 / 12.4 200 / 100 29.8 59.6 92.4 MTC-015-3BD18(CK) 15 15.6 / 7.8 35.4 / 17.7 280 / 140 44.5 89.0 124.6 MTC-020-3BD18(CK) 20 19.0 / 9.5 47.6 / 23.8 400 / 200 59.7 119.4 155.2 MTC-025-3BD18(CK) 25 24.0 / 12.0 56.4 / 28.2 440 / 220 73.9 152.2 206.9 MTC-030-3BD18(CK) 30 27.0 / 13.5 67.2 / 33.6 520 / 260 88.7 177.4 257.2 MTC-040-3BD18(CK) 40 35.0 / 17.5 93.0 / 46.5 720 / 360 118 248 355 MTC-050-3BD18(CK) 50 38.6 / 19.3 114.6 / 57.3 880 / 440 148 311 444 MTC-060-3BD18(CK) 60 48.0 / 24.0 139.4 / 69.7 870 / 435 179 322 483 MTC-075-3BD18(CK) 75 59.2 / 29.6 172.8 / 86.4 1086 / 543 221 398 530 MTC-100-3BD18(CK) 100 72.0 / 36.0 230 / 115 1450 / 725 296 592 858 MTC-125-3BD18 125 82.0 / 41.0 274 / 137 1815 / 908 355 604 888 MTC-150-3BD18 150 97.6 / 48.8 326 / 163 2170 / 1085 433 779 1083 MTC-200-3BD18 200 140 / 70.0 446 / 223 2900 / 1450 590 1180 1652 MTC-250-3D18 250 – / 85.6 – / 282 – / 2017 728 1660 2402 MTC-300-3D18 300 – / 96.6 – / 334 – / 2351 864 1953 2817 1) TC-frame motors (MTC-xxx-xxxxCK) are T-frame motors with applicable C-face accessory kits installed. *** TABLE CONTINUED NEXT PAGE *** Page 1–28 IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Chapter 1: Getting Started MTC EPAct Cast-Iron 3-Phase Motors Features and Specs (continued) Motor Performance Data – Cast-Iron T-Frame and TC-frame – 1800 rpm *** TABLE CONTINUED FROM PREVIOUS PAGE *** Performance Data EPAct T & TC(1) Frame Three-Phase Motors 1800 rpm – (460 Volt except as indicated) Part Number HP Slip (%) Max Time @ Locked Rotor Current (hot) Temperature Rise @ Full Load 1 2.22 MTC-001-3BD18(CK) 1-1/2 2.50 MTC-1P5-3BD18(CK) 2 2.78 MTC-002-3BD18(CK) 20 seconds 3 2.78 MTC-003-3BD18(CK) 5 2.78 MTC-005-3BD18(CK) 7-1/2 2.22 MTC-7P5-3BD18(CK) 10 2.20 13 seconds MTC-010-3BD18(CK) 15 1.67 MTC-015-3BD18(CK) 20 seconds 20 1.67 MTC-020-3BD18(CK) 80° C (176°F) 25 1.38 16 seconds MTC-025-3BD18(CK) 30 1.38 MTC-030-3BD18(CK) 40 1.39 MTC-040-3BD18(CK) 50 1.39 20 seconds MTC-050-3BD18(CK) 60 0.83 MTC-060-3BD18(CK) 75 0.83 MTC-075-3BD18(CK) 100 0.83 MTC-100-3BD18(CK) 125 0.83 MTC-125-3BD18 15 seconds 150 0.83 MTC-150-3BD18 200 0.83 MTC-200-3BD18 250 0.54 MTC-250-3D18 20 seconds 85° C (185°F) 300 0.53 MTC-300-3D18 1) TC-frame motors (MTC-xxx-xxxxCK) are T-frame motors with applicable C-face accessory kits installed. IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Page 1–29 Chapter 1: Getting Started MTC EPAct Cast-Iron 3-Phase Motors Features and Specs (continued) Motor Performance Data – Cast-Iron T-Frame – 1200 rpm Part Number HP MTC-001-3BD12 1 MTC-1P5-3BD12 1-1/2 MTC-002-3BD12 2 MTC-003-3BD12 3 MTC-005-3BD12 5 MTC-7P5-3BD12 7-1/2 MTC-010-3BD12 10 Part Number HP NEMA Design Performance Data – EPAct T-Frame Three-Phase Motors – 1200 rpm (460 Volt except as indicated) F.L. RPM Minimum Speed (rpm) Maximum Speed (rpm) Constant Torque (2:1) Variable Torque (5:1) CHP(2) Safe 600 240 1800 3600 1150 1170 B 1180 A Current @ 230V/460V (Amps) No Load Full Load Locked Rotor Torque (lb·ft) Full Load Locked Rotor Breakdown MTC-001-3BD12 1 3.2 / 1.6 3.2 / 1.6 25.0 / 12.5 4.59 11.48 14.69 MTC-1P5-3BD12 1-1/2 3.5 / 1.8 4.8 / 2.4 40.0 / 20.0 6.60 18.5 24.4 MTC-002-3BD12 2 4.0 / 2.0 6.1 / 3.1 50.0 / 25.0 9.02 24.4 30.7 MTC-003-3BD12 3 4.7 / 2.4 8.4 / 4.2 64.0 / 32.0 13.4 22.8 37.5 MTC-005-3BD12 5 7.3 / 3.7 13.6 / 6.8 92.0 / 46.0 22.2 37.7 53.3 MTC-7P5-3BD12 7-1/2 12.6 / 6.3 21.2 / 10.6 127 / 63.5 32.9 75.7 98.7 MTC-010-3BD12 10 7.6 / 3.8 28.0 / 14.0 168 / 84.0 44.8 98.6 139 Part Number HP Temperature Rise @ Full Load Max Time Locked Rotor (Hot) F.L. Efficiency (%) F.L. Power Factor Rotor Inertia (lb·ft2) Slip (%) MTC-001-3BD12 1 81.1 0.72 0.009 3.3 MTC-1P5-3BD12 1-1/2 85.5 0.65 0.068 2.5 MTC-002-3BD12 2 86.5 0.70 0.100 2.5 MTC-003-3BD12 3 87.5 0.72 0.207 1.7 80°C (176°F) 20 seconds MTC-005-3BD12 5 87.5 0.72 0.258 1.7 MTC-7P5-3BD12 7-1/2 89.5 0.71 0.480 1.7 MTC-010-3BD12 10 89.5 0.74 2.487 1.7 2) Maximum Constant HP RPM is for direct-coupled loads Page 1–30 IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Chapter 1: Getting Started MTC EPAct Cast-Iron 3-Phase Motors Features and Specs (continued) Motor Performance Data – Cast-Iron T-Frame – 3600 rpm Part Number HP MTC-1P5-3BD36 1-1/2 MTC-002-3BD36 2 MTC-003-3BD36 3 MTC-005-3BD36 5 MTC-7P5-3BD36 7-1/2 MTC-010-3BD36 10 NEMA Design Performance Data – EPAct T-Frame Three-Phase Motors – 3600 rpm (460 Volt except as indicated) F.L. RPM Minimum Speed (rpm) Maximum Speed (rpm) Constant Torque (2:1) Variable Torque (5:1) CHP(2) Safe 1800 720 5400 5400 3480 B 3520 3510 3520 3530 Current @ 230V/460V (Amps) Part Number HP Torque (lb·ft) No Load Full Load Locked Rotor Full Load Locked Rotor Breakdown MTC-1P5-3BD36 1-1/2 1.4 / 0.7 3.8 / 1.9 40.0 / 20.0 2.23 4.01 5.58 MTC-002-3BD36 2 1.5 / 0.8 5.0 / 2.5 50.0 / 25.0 3.03 6.06 8.18 MTC-003-3BD36 3 2.8 / 1.4 7.2 / 3.6 64.0 / 32.0 4.50 10.4 16.2 MTC-005-3BD36 5 4.0 / 2.0 11.3 / 5.7 92.0 / 46.0 7.46 15.7 26.5 MTC-7P5-3BD36 7-1/2 5.0 / 2.5 16.8 / 8.4 127 / 63.5 11.0 22.0 36.3 MTC-010-3BD36 10 5.7 / 2.8 22.4 / 11.2 162 / 81.0 15.0 33.0 49.5 HP Temperature Rise @ Full Load Max Time Locked Rotor (Hot) F.L. Efficiency (%) F.L. Power Factor Rotor Inertia (lb·ft2) Slip (%) Part Number MTC-1P5-3BD36 1-1/2 82.5 0.86 0.009 3.3 MTC-002-3BD36 2 84.0 0.87 0.010 3.3 MTC-003-3BD36 3 85.5 0.86 0.034 2.2 80°C (176°F) 20 seconds MTC-005-3BD36 5 87.5 0.88 0.040 2.5 MTC-7P5-3BD36 7-1/2 88.5 0.89 0.258 2.2 MTC-010-3BD36 10 89.5 0.89 0.109 1.9 2) Maximum Constant HP RPM is for direct-coupled loads IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Page 1–31 Chapter 1: Getting Started Receiving and Inspection Unpacking After receiving an IronHorse motor, please check for the following: • Open the motor packaging and inspect for damage during shipment. • M ake sure the part number indicated on the motor nameplate corresponds with the part number on your order. • F or all 56C and 56HC framed motors, make sure that the shipment contains the motor, the removable mounting foot and mounting foot bolts. • Read the enclosed Product Advisory. Motor nameplate 0707121305 Mounting foot bolts Mounting foot IronHorse® Part Number Explanation MT CP - 7P5 - 3 BD 18 C Optional Identifier C: R: C-face cast-iron motor Round body (no mounting feet) Nominal RPM 12: 18: 36: 1200 rpm 1800 rpm 3600 rpm Voltage Class (multiple letters possible) A: B: C: D: L: M: Phase 1: 3: 115 VAC 208-230 VAC 230 VAC 460 VAC 90 VDC 180 VDC Single phase Three phase Rated Horsepower P: # left of P: # right of P: Decimal Point Rated full hp Rated fractional hp Motor type A: AP: C: CP: F: R(2): RP: PM: SS: Motor Accessory Motor Accessory for Premium-efficiency motor AC EPAct motor with Cast-iron frame AC Premium-efficiency motor with Cast-iron frame Farm Duty AC Motor w Rolled-steel frame AC Premium-efficiency motor with Rolled-steel frame DC Permanent Magnet AC Motor w Stainless-steel frame IronHorse Motors Series Designation Page 1–32 IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Chapter 1: Getting Started Reshipping If an IronHorse motor needs to be reshipped from the initial shipping point, the following procedures should be followed to protect the motor from damage. 1) If the original packaging is to be used for reshipment, inspect the packaging for previous shipping damage and repackage if necessary. Take care to protect the motor body, fan cover and shaft. 2) I t is a good idea to bolt the motor to a platform that fits securely in the bottom of the shipping crate or box. This helps prevent the motor from shifting during transport and thus protects the bearings from damage. 3) A shaft lock device should be installed on motors from 100 to 300 hp prior to shipment. The shaft lock helps prevent bearing damage. 4) M otors should only be lifted by the the eyebolt(s) provided on the motor. When lifting motors with more than one eyebolt, use every bolt provided. Long Term Storage The following preventative measures should be taken when storing IronHorse motors for a long period of time. 1) S tore motors in a controlled temperature, dry atmosphere free of excess dirt, dust and airborne particles. 2) Rotate the motor shaft every sixty days to prevent hardening of the bearing grease. 3) W arehoused motors should have the bearing grease purged and replaced every six months. Use only Mobil POLYREX® EM Polyurea grease. Warranty • IronHorse MTSS stainless steel motors carry a one year warranty from the date of invoice. • A ll other IronHorse motors (except MTSS) carry a two year warranty from the date of invoice. For motors 40 hp and smaller, valid warranty claims will be resolved by product replacement. Motors 50 hp and larger must be evaluated by an authorized Electrical Apparatus Service Association (EASA) service center. Valid warranty claims will be resolved by repair or replacement at the discretion of AutomationDirect. See AutomationDirect Terms and Conditions in our current catalog or online at http://www.automationdirect.com/static/specs/adpolicy.pdf for complete details. Authorized EASA service centers are available nationwide. Visit the EASA website at www.easa. com to find the nearest authorized service center. These shops may also be able to assist with non-warranty service. IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017 Page 1–33 Chapter 1: Getting Started BLANK PAGE Page 1–34 IronHorse® General Purpose AC Motors User Manual – 7th Edition – January 12, 2017
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2017:01:26 09:58:56-05:00 Creator : Adobe InDesign CC 2014 (Windows) Modify Date : 2017:01:26 09:59:03-05:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2017:01:26 09:59:03-05:00 Creator Tool : Adobe InDesign CC 2014 (Windows) Format : application/pdf Document ID : uuid:441f4a2d-72fc-4cd1-95f1-b16ef2e8a235 Instance ID : uuid:315c2963-4d5b-4d38-bd50-916cfefbddb6 Producer : Adobe PDF Library 11.0 Page Count : 34EXIF Metadata provided by EXIF.tools