Chapter 5 Ch5
User Manual: Chapter 5 Do-more T1H Series PLC Hardware User Manual - AutomationDirect
Open the PDF directly: View PDF 
.
Page Count: 20
| Download | |
| Open PDF In Browser | View PDF |
Specifications Discrete I/O Modules In This Chapter: Chapter 15 Discrete I/O Module Overview.............................................................................. 5–2 Discrete I/O Modules............................................................................................. 5–3 Chapter 5: Specifications - Discrete I/O Modules 1 2 3 4 5 6 7 8 9 10 11 12 13 14 A B C D Discrete I/O Modules Overview There are 15 discrete I/O modules available. The specifications and wiring diagrams for these modules are found in this chapter. Each discrete I/O module is identified as an “Input” or “Output” module using the color coding scheme shown below. A blue dot on the front panel signifies an Input module and a red dot signifies an Output module. Discrete Input Modules Discrete Input Modules Module Part Number T1K-08ND3 0 0 1 1 2 2 Module Type (Blue: Input) 3 4 5 6 7 3 4 5 6 7 of Part Number Number Inputs 8 T1K-08ND3 16 T1K-16ND3 8 T1K-08NA-1 16 T1K-16NA-1 5–2 24V Module Type (Red: Output) FU1 FU2 0 0 1 1 2 2 3 4 5 6 7 3 4 5 6 7 Sinking/Sourcing DC Input 5-4 Sinking/Sourcing DC Input 5-6 AC Input 5-8 AC Input 5-9 Number of Outputs Description See Page T1K-08TD1 8 Sinking DC Output 5-10 T1K-16TD1 16 Sinking DC Output 5-11 T1K-08TD2-1 8 Sourcing DC Output 5-12 T1K-16TD2-1 16 Sourcing DC Output 5-13 T1H-08TDS 8 Isolated Sinking/Sourcing DC Output 5-14 T1K-08TA 8 AC Output 5-15 T1K-16TA 16 AC Output 5-16 T1K-08TAS 8 Isolated AC Output 5-17 T1K-08TR 8 Relay Output 5-18 T1K-16TR 16 Relay Output 5-19 T1K-08TRS 8 Isolated Relay Output 5-20 Part Number T1K-08TD1 See Page Discrete Output Modules Discrete Output Modules Module Part Number Description WARNING: The T1H Series PLC does not support any Hot-Swap features. Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. A - T1H-DM-M Chapter 5: Specifications - Discrete I/O Modules T1K-08ND3 - DC Input Specifications Inputs Per Module Commons Per Module Operating Voltage Input Voltage Range Peak Voltage Input Current (Typical) Input Impedance ON Voltage Level OFF Voltage Level Min. ON Current Max. OFF Current OFF to ON Response ON to OFF Response Base Power Requirements Status Indicators Weight Points 8 (sink / source) Ext. power: 2, isolated (4 pts. / com.) Int. power: 2, all 8 pts. internally connected 12–24 VDC 10.8–26.4 VDC min. / max. 30VDC 4mA @ 12VDC, 8.5 mA @ 24VDC 2.8 kq > 10.0 VDC < 2.0 VDC 4mA 0.5 mA 2–8 ms, Typical: 4ms 2–8 ms, Typical: 4ms 35mA @ 5VDC Logic Side 70g Derating Chart 8 Note: External Power, Sink Module Configuration Shown T1K-08ND3 0 0 1 1 2 2 3 4 5 6 7 3 4 5 6 7 Input points Top Row 6 4 2 0 0 32 10 20 30 40 50 55 °C 50 68 86 104 122 131 °F Ambient Temperature ( °C/°F) Commons V 0 and V 1 supply 24 VDC or 0 VDC if Internal Power Jumper is selected V0 V1 Bottom Row Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. A - T1H-DM-M 1 2 3 4 5 6 7 8 9 10 11 12 13 14 A B C D 5–3 Chapter 5: Specifications - Discrete I/O Modules 1 2 3 4 5 6 7 8 9 10 11 12 13 14 A B C D Jumper Selection External Power Equivalent Input Circuit MODULE Sink Module External Power SOURCE INT SINK EXT MODULE Source Module External Power SOURCE INT SINK EXT Internal Power MODULE SOURCE SINK MODULE INT SOURCE EXT SINK V0 5–4 EXT V0 V1 V1 Source Module Internal Power INT Internal Module Circuitry Sink Module Internal Power Internal Module Circuitry Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. A - T1H-DM-M Chapter 5: Specifications - Discrete I/O Modules T1K-16ND3 - DC Input Specifications Inputs Per Module Commons Per Module Operating Voltage Input Voltage Range Peak Voltage Input Current (Typical) Input Impedance ON Voltage Level OFF Voltage Level Min. ON Current Max. OFF Current OFF to ON Response ON to OFF Response Base Power Requirements Status Indicators Weight 16 (sink / source) Ext. power: 4, isolated (4 pts. / com.) Int. power: 4, all 16 pts. internally connected 12–24 VDC 10.8 - 26.4 VDC min. / max. 30VDC 4mA @ 12VDC, 8.5 mA @ 24VDC 2.8 kq >10.0 VDC <2.0 VDC 4mA 0.5 mA 2–8 ms, Typical: 4ms 2–8 ms, Typical: 4ms 70mA @ 5VDC Logic Side 160g T1K-16ND3 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 10 11 12 13 14 15 9 10 11 12 13 14 15 Input points 0 1 2 3 4 5 6 7 8 9 10 11 12 13 1415 Points Top Row Derating Chart 16 COM 0 12 8 0 0 32 10 20 30 40 50 55 °C 50 68 86 104 122 131 °F Ambient Temperature ( °C/°F) COM 2 COM 3 Commons 12-24 VDC 4 COM 1 V0 V1 V2 12-24 VDC V3 V 0–V 3 supply 24 VDC or 0 VDC if Internal Power Jumper is selected Bottom Row Note: External Power, NOTE: When using external power, the Sink module can be wired to either sink current or source current Module regardless of the module’s sink/source jumper position. Configuration When using internal power, the sink/source jumpers determine the module’s configuration.” Shown Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. A - T1H-DM-M 1 2 3 4 5 6 7 8 9 10 11 12 13 14 A B C D 5–5 Chapter 5: Specifications - Discrete I/O Modules 1 2 3 4 5 6 7 8 9 10 11 12 13 14 A B C D Jumper Selection External Power MODULE SOURCE INT SINK MODULE Equivalent Input Circuit Sink Module External Power EXT Source Module External Power SOURCE INT SINK EXT Internal Power MODULE INT SOURCE SINK MODULE SINK EXT 5–6 Internal Module Circuitry Field Device EXT V 0-V 3 V 0-V 3 Source Module Internal Power INT SOURCE Sink Module Internal Power Internal Module Circuitry Field Device Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. A - T1H-DM-M 48 (1.89) 9.2 (0.36) Chapter 5: Specifications - Discrete I/O Modules 8.1 (0.32) T1K-08NA-1 - AC Input Specifications COM 0 V0 Commons V0 2 3 4 0 1 2 1 2 3 3 54.3(2.14) 5 6 7 5 6 7 7 5 5 6 6 7 7 COM 0 COM 1 83.3 (3.28) Side View Bottom Equivalent Input Circuit 10 20 30 40 50 55 °C 50 68 86 104 122 131 °F Ambient TemperatureInternal ( °C/°F) Module V0 V1 Row V 0, V 1 not used with AC Input Modules Circuitry +V +V Side View Equivalent Input Circuit Internal Module Circuitry +V +V To LED Input 90-120 VAC COM 90-120 VAC COM Optical Isolator mm (in.) 90-120 VAC Commons 2 Input mm (in.) 8.1 (0.32) 10 6 20 30 40 50 55 °C 50 68 86 104 122 131 °F 4 Ambient Temperature ( °C/°F) 0 32 4 4 Top Row Derating Chart 0 4 4 8 0 32 6 3 7 3 Input points 90-120 VAC 0 2 62 83.3 (3.28) V 0, V 1 not used with AC Input Modules Points 5 T1K–08NA–1 0 1 05 1 80 (3.15) 4 V1 4 2 3 80 (3.15) 1 2 54.3(2.14) 0 1 Derating Chart 8 6 0 0 8.1 (0.32) V 0, V 1 not used with AC Input Modules Points T1K-08NA-1 8.1 (0.32) 90-120 VAC COM 1 V1 T1K–08NA–1 48 (1.89) 25.7(1.01) 8 2, 4 pts. / com. (Isolated) 9.2 (0.36) 90–120 VAC, 47–63 Hz 80–132 VAC, 47–63 Hz min. / max. 8mA @ 100VAC (50Hz) 10mA @ 100VAC (60Hz) Input Current 12mA @ 132VAC (50Hz) 15mA @ 132VAC (60Hz) Input points 14kV @ 50Hz, 12kV @ 60Hz Input Impedance > 6mA @ 75VAC ON Current / Voltage 90-120 VAC 20VAC VAC COM 0 COM 1 < 2.0 mA @ 90-120 OFF Current / Voltage < 40ms OFF to ON Response < 40ms ON to OFF Response Commons 35mA @ 5VDC Base Power Requirements Logic Side Status Indicators 70g WeightVAC 90-120 25.7(1.01) Inputs Per Module Input points Commons Per Module Operating Voltage Input Voltage Range To LED Optical Isolator Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. A - T1H-DM-M 1 2 3 4 5 6 7 8 9 10 11 12 13 14 A B C D 5–7 Chapter 5: Specifications - Discrete I/O Modules T1K-16NA-1 - AC Input 8.1 (0.32) Points 16 90-120 VAC V1 V2 V3 5 6 7 8 54.3(2.14) 4 9 10 11 12 13 14 15 89 (3.5) 25.7(1.01) NA–1 mm (in.) Top Row mm (in.) Derating Chart Points 4 COM 0 COM 1 83.3 (3.28) COM 2 COM 3 16 0 0 32 12 Commons 90-120 VAC 10 20 30 40 50 55 °C 50 8 68 86 104 122 131 °F Ambient Temperature ( °C/°F) 4 V0 0 0 32 90-120 VAC SideBottom View 10 20 30 40 50 55 °C 50 68 86 104 122 131 °F Ambient Temperature ( °C/°F) V1 V2 V3 Row V 0–V 3 not used with AC Input Modules Equivalent Input Circuit Internal Module Circuitry +V Side View +V Equivalent Input Circuit Input Internal Module Circuitry Input +V +V To LED To LED 90-120 VAC COM 90-120 VAC COM Optical Isolator Optical Isolator Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. A - T1H-DM-M 80 (3.15) 3 8.1 (0.32) 8 5–8 2 8.1 (0.32) V 0–V 3 not used with AC Input Modules 12 1 83.3 (3.28)1415 0 1 2 3 4 5 6 7 8 9 10 11 1213 Derating Chart V0 0 Input points Commons 90-120 VAC T1K-16NA-1 NA–1 54.3(2.14) 16 4, 4 pts. / com. (Isolated) 90–120 VAC, 47–63 Hz 80–132 VAC, 47–63 Hz min. / max. 0 1 2 3 4 5 6 7 8 9 10 11 1213 1415 8mA @ 100VAC (50Hz) 10mA @ 100VAC (60Hz) Input Current 12mA @ 132VAC (50Hz) 15mA @ 132VAC (60Hz) 9.2 (0.36) 14kV @ 50Hz, 12kV @ 60Hz Input Impedance > 6mA @ 75VAC ON Current / Voltage COM COM 1 COM 2 COM < 2.0 3 mA @ 20VAC OFF0Current / Voltage Input points < 40ms OFF to ON Response 1Commons 2 3 4 5 6 7 8 9<10 11 1213 1415 40ms ON to OFF0Response 20 VAC 90-120 VAC 70mA @ 5VDC Base Power Requirements Logic Side Status Indicators V2 V3 V 0 V1 120g Weight 8.1 (0.32) V 0–V 3 not used AC Modules COMwith 0 COMInput 1 COM 2 COM 3 80 (3.15) Specifications Inputs Per Module Commons Per Module Input points Operating Voltage Input Voltage Range 25.7(1.01) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 A B C D 89 (3.5) 9.2 (0.36) Chapter 5: Specifications - Discrete I/O Modules 48 (1.89) 9.2 (0.36) 8.1 (0.32) Output Points V0 T1K–08TD1 V 0–V 1 internally connected 0.5A 6 0.75A T1K–08TD1 Derating Chart Points 2 0 0 32 0.5A 6 0.75A 4 1.0A 10 20 30 40 50 55 °C 68 86 104 122 131°F 250 Ambient Temperature ( °C/°F) 0 10 20 30 40 50 55 °C 50 68 86 104 122 131°F Ambient Temperature ( °C/°F) 1 2 V1 L Output 6-27 VDC L V0 V1 Output 6-27 VDC 1 1 3 2 2 4 3 4 5 6 7 3 4 5 6 7 5 6 7 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 80 (3.15) T1K–08TD1 Output Points Top mm (in.) 6 7 mm (in.) 83.3 (3.28) 12-24 VDC COM 0 COM 1 Commons 24 VDC Side View Bottom V0 V1 Side View V 0–V 1 internally connected Internal Module Circuitry Optical Isolator Optical Isolator 6.3 A COM To LED To LED 6.3 A COM Row 8.1 (0.32) InternalOutput Module Circuit Circuitry Equivalent V0 24 VDC 0 80 (3.15) 0 54.3(2.14) 0 8.1 (0.32) Equivalent Output Circuit 24 VDC FU2 48 (1.89) 1.0A 8 0 32 FU1 0 1 2 3 4 5 83.3 (3.28) 8 4 24V T1K–08TD1 V1 Derating Chart Points T1K-08TD1 54.3(2.14) 8 (sink) Outputs Per Module 2 internally connected Commons Per Module 0 1 2 3 4 5 6 7 6–27 VDC Operating Voltage Range 5–30 VDC min. / max. Output Voltage Range 50VDC Peak Voltage Fuses located 9.2 (0.36) 1A / pt., 4A / common Max. Load Current under top cover Output 15eAPoints @ 30VDC Max. Leakage Current 0.3 VDC @ 1.0 A ON Voltage Drop 5 6 7 Max. Inrush Current 0 1 22A3 for4100ms 12-24 VDC COM 0 COM 1 < 10es OFF to ON Response < 60es ON to OFF Response Fuses located under top cover 100mA @ 5VDC Base Power Requirements Commons 200mA max. @ 20–28 VDC External Power Required Logic Side 24 VDCIndicators Status 12-24 VDC 0 ON COM Error Status Indicators COM 24V = low 1external power FU1 /VFU2 V0 1 ON = fuse 1 or fuse 2 blown (LEDs) Fuses (User Replaceable) 2, (6.3 A, 250V / common), (4 pts. / fuse) 8.1 (0.32) V 0–V 1 internally Commons NQ3connected - 6.3 SOC corp. T1K-FUSE-1 85g Weight 24 VDC 25.7(1.01) Specifications 25.7(1.01) T1K-08TD1 - DC Output Row 1 2 3 4 5 6 7 8 9 10 11 12 13 14 A B C D Other Circuits Other Circuits Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. A - T1H-DM-M 5–9 Chapter 5: Specifications - Discrete I/O Modules T1K-16TD1 - DC Output TD1 FU1 FU3 FU2 FU4 0 0 1 1 8.1 (0.32) 2 Derating Chart 0.4A 0.5A 16 8 T1K–16TD1 Points Derating Chart 0 0.4A 12 COM 0 COM 1 0.75A 8 0 10 20 30 40 50 55 °C 50 68 86 104 122 131°F Ambient Temperature ( °C/°F) 24 VDC 9 10 11 12 13 14 15 9 10 11 12 13 14 15 COM 2 Commons 24 VDC V0 V1 COM 3 Side View V2 Side View V3 V 0 – V 3 internally connected Equivalent Output Circuit Equivalent Output Circuit Internal Module Circuitry Output L mm (in.) Top Internal Module Circuitry V0-V3 24 VDC V0-V3 Output 6-27 VDC 8 8 83.3 (3.28) 0 10 20 30 40 50 55 °C 32 4 50 68 86 104 122 131°1.0A F Ambient Temperature ( °C/°F) 6-27 VDC 7 7 Output Points 83.3 (3.28) 12-24 VDC 0.5A 1.0A 0 32 6 6 0.75A 16 4 5 5 0 1 2 3 4 5 6 7 8 9 1011 1213 14 15 Row mm (in.) T1K–16TD1 12 4 TD1 8.1 (0.32) Points 3 2 3 4 89 (3.5) 54.3(2.14) 24V 80 (3.15) T1K-16TD1 V 0 – V 3 internally connected L Optical Isolator COM 6.3 A To LED Optical Isolator To LED 6.3 A COM 5–10 89 (3.5) 8.1 (0.32) 25.7(1.01) 16 (sink) Outputs Per Module 4 internally connected Commons Per Module 6–27 VDC Operating Voltage Range Output Points5–30 VDC min. / max. Output Voltage Range 50VDC Peak Voltage Fuses located 0 1 2 3 4 5 6 7 8 9 1011 1213 14 15 (0.36) under top cover 1A / pt., 4A / common 9.2 Max. Load Current 15eA @ 30VDC Max. Leakage Current 0.3 VDC @ 1.0 A ON Voltage Drop 12-24 VDC 2A for 100ms Max. Inrush Current Output Points < 10es OFF to ON Response COM 0 COM 1 COM 2 COM 3 Fuses located 1 2 3 4 5 6 7 8 9 1011 1213 14 15 < 60es ON to OFF0 Response under top cover 200mA @ 5VDC Base Power Requirements Commons 400mA max. @ 20–28 VDC External Power Required 12-24 VDC Logic Side Status Indicators 24V ONV=3low external power 24 VDCError Status V 0 COM V 1 V 2 Indicators 0 COM 1 COM 2 / FU2 COM 3 = fuse 1 or 2 blown 8.1 (0.32) FU1 ON (LEDs) FU3 / FU4 ON = fuse 3 or 4 blown V 0 – V 3 internally connected Fuses (User Replaceable) Commons4, (6.3 A, 250V / common), (4 pts. / fuse) NQ3 - 6.3 SOC corp. T1K-FUSE-1 140g Weight 24 VDC V0 V1 V2 V3 54.3(2.14) 9.2 (0.36) 80 (3.15) Specifications 25.7(1.01) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 A B C D Other Circuits Other Circuits Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. A - T1H-DM-M Bottom Row Chapter 5: Specifications - Discrete I/O Modules T1K-08TD2-1 - DC Output 9.2 (0.36) 48 (1.89) Output Points Specifications FU1 25.7(1.01) 25.7(1.01) FU2 80 (3.15) 54.3(2.14) 54.3(2.14) 8 (source) Outputs Per Module 0 1 2 3 4 25 internally 6 7 connected Commons Per Module 12–24 VDC Operating Voltage Range 9.2 (0.36) 48T1K-08TD2-1 (1.89) T1K–08TD2–1 10.8 - 26.4 VDC min. / max. Output Voltage Range Fuses located 8.1 (0.32) Output 50VDCPoints Peak Voltage under top cover 1A / pt., 4A / common Max. Load Current 0 1 2 3 4 5 6 7 3 4 5 6 7 0 1 2 3 4 5 6 7 @ 26.4 VDC Max. Leakage Current 0 1 2 15eA 0 1 2 3 4 5 6 7 1.2 VDC ONVDC Voltage Drop COM 0 0 1 2T1K–08TD2–1 3 4 5 6 7 COM 1 @ 1.0 A 12-24 VDC 12-24 2A for 100ms Max. Inrush Current Fuses located under top cover < 10es OFF to ON Response < 0.5 ms ON to OFF Response Commons 100mA @ 5VDC Base Power Requirements 0 1 2 3 4 5 6 7 12-24 VDC 0 1 2 3 4 5 6 7 COM 0Logic Side COM 1 12-24 VDC Status Indicators Error Status Indicators 0V 0V FU1 / FU2 ON = fuse 1 or fuse 2 blown (LEDS) V 0–V 1 internally connected 8.1 (0.32) Output Points Commons Fuses (User Replaceable) 2, (6.3 A, 250V / common), (4 pts. / fuse) Top NQ3 6.3 SOC corp. Note: Apply the 0 V label that comes with the I/O T1K-FUSE-1 Row 0 1 2 3 4 5 6 7 100g Weight to I/O base terminal mm (in.) module points V 0–V 1 to V 0V properly identify the 0 VDC0 terminal points. 80 (3.15) 8.1 (0.32) V 0–V 1 internally connected 8.1 (0.32) Note: ApplyDerating the 0 Chart V label that comes with the I/O Points module to I/O base terminal points V 0–V 1 to 8 0.75A 12-24 VDC properly identify the 0 VDC terminal points. 6 83.3 (3.28) mm (in.) COM 0 1.0A 83.3 (3.28) 4 0 0 32 Commons Derating Chart Points 2 8 0.75A 6 10 20 30 40 50 55 °C 50 68 86 104 122 131 °F 4 Ambient Temperature ( °C/°F) 1.0A Bottom Row 0V 0V Side View V 0–V 1 internally connected Note: Apply the 0 V label that comes with the I/O Equivalent Output Circuit 2 module to I/O base terminal points V 0–V 1 to 0 0 32 Source Module External Power 12-24 VDC COM 1 10 20 30 40 50 55 °C 50 68 860 V 104 122 131 °F Ambient Temperature ( °C/°F) Output (V 0 - V 1) L Source Module 12-24 VDC External Power identify the 0 VDC terminal points. Internalproperly Module Circuitry Side View Isolator EquivalentOptical Output Circuit To LED Internal Module Circuitry 0V 6.3 A Output (V 0 - V 1) COM L Optical Isolator Other Circuits To LED 6.3 A 12-24 VDC COM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 A B C D Other Circuits Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. A - T1H-DM-M 5–11 Chapter 5: Specifications - Discrete I/O Modules T1K-16TD2-1 - DC Output 9.2 (0.36) 89 (3.5) 8.1 (0.32) COM 1 COM 2 COM 3 V 0 – V 3 internally connected FU1 / FU2 Commons 0V 0V 0V ON = fuse 1 or 2 blown FU3 / FU4 ON = fuse 3 or 4 blown 7 7 8 8 9 10 11 12 13 14 15 9 10 11 12 13 14 15 8.1 (0.32) 4, (6.3 A, 250 V / common), (4 pts. / fuse) NQ3 - 6.3 SOC corp. 140g0 V 8.1 (0.32) Output Points 83.3 (3.28) V 0 – V 3 internally connected 54.3(2.14) 6 6 Top mmRow (in.) 0 1 2 3 4 5 6 7 8 9 1011 1213 1415 Derating Chart Points 16 0.5A 0.75A 12 12 0 8 0 32 0 32 COM 1 0V 0V 0V 0V Bottom Row Internal Module Circuitry 0V (V 0-V 3) Optical Isolator Internal Module Circuitry 0V (V 0-V 3) 6.3 A COM 12-24 VDC COM 3 Side View Output Output COM 2 V 0 – V 3 internally connected 10 20 30 40 50 55 °C 50 68 86 104 122 131 °F Ambient Temperature ( °C/°F) Source Module External Power COM 0 Commons 10 20 30 40 50 55 °C 1.0A 50 68 86 104 122 131 °F Ambient Temperature ( °C/°F) Source Module External Power 12-24 VDC 83.3 (3.28) 0.5A 0.75A 4 0 1.0A Derating Chart 8 Points 4 16 12-24 VDC To LED Optical Isolator To LED Other Circuits 6.3 A 12-24 VDC 5–12 COM Other Circuits Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. A - T1H-DM-M 25.7(1.01) FU4 54.3(2.14) FU3 FU2 25.7(1.01) COM 0 FU1 80 (3.15) 16 (source) 4 internally connected T1K-16TD2-1 TD2–1 9.2 (0.36)Fuses located 12–24 VDC 89 (3.5) 0 1 2 3 4 5 6 7 8 9 1011 1213 1415 10.8–26.4 VDC min. / max. under top cover 8.1 (0.32) 0 1 2 3 4 5 50VDC 0 1 2 3 4 5 1A / pt., 4A / common (Subject 12-24 VDC to derating) 12-24 VDC Output Points 15eA @ 26.4 VDC TD2–1 1.2 VDC @ 1.0 A Fuses located COM 2 COM 3 0 1 COM 2 3 40 5 6COM 7 81 9 1011 1213 under top cover 2A for1415 100ms <10es < 0.5 ms 12-24 VDC 12-24 VDC 200mA @ 5VDC Side 0 V 0 Logic V 0V 0V 80 (3.15) 1 Outputs Per Module Specifications Output Points Commons Per Module 2 Operating Voltage Range Output Voltage Range Voltage 3 Peak Max. Load Current Leakage Current 4 Max. ON Voltage Drop Max. Inrush Current to ON Response 5 OFF Commons ON to OFF Response Power Requirements 6 Base Status Indicators Error Status Indicators (LEDs) 7 Note: Apply 0 V label that comes with the I / O Fuses (Userthe Replaceable) mm (in.) module to I / O base terminal points V 0–V 3 to T1K-FUSE-1 8 properly Weight identify the 0 VDC terminal points. Apply the 0 V label that comes with the I / O 9Note: module to I / O base terminal points V 0–V 3 to 10properly identify the 0 VDC terminal points. 11 12 Side View 13 Note: Apply the 0 V label that comes with the I / O Equivalent Circuit module to Output I / O base terminal points V 0–V 3 to 14 properly identify the 0 VDC terminal points. A Equivalent Output Circuit B L C L D Chapter 5: Specifications - Discrete I/O Modules T1H-08TDS - Isolated DC Output ote: Apply the labels that come withthe thelabels I/O that come with the I/O Note: Apply 89 (3.5) 9.2 (0.36) odule to the I/O base tomodule properlytoidentify 9.2 (0.36) Specifications the I/O the base to properly identify the 8.1 (0.32) rminal points. Outputs terminal 8 (sink / source) points. Per Module L L L L bussed together. The 8 User Bus 2 terminals are Between T-junction = 302!F bussed together. The 8 User Bus 2 terminals are Sinking also bussed together. Shutdown Thermal also bussed together. (150!C to 190!C) Examples L 0 1 0 1 8.1 (0.32) 3 4 3 4 8.1 Module (0.32) Circuitry Inernal COM terminals are 2 terminals are L 36 VDC COM Out 5-36 VDC 5-36 Opto VDC Isolator mm (in.) Output Points Side View Inernal Module Circuitry Out To LED L Sourcing L L To LED 7 7 to 374!F Inernal Module Circuitry mm (in.) 83.3 (3.28) COM LOptoOut Isolator 6 6 mm (in.) ourcing (High Side Switching) Sourcing (High Side Switching) Sinking (Low Side Switching) 0 0 1 1 2 2 3 3 4 4 Sinking (Low Side Switching) ER BUS 2 –––– 5 5 83.3 (3.28) Thermal shutdown temp. minus 5°F (15°C) Over Temperature Reset Logic Side Status Indicators 93.6 g Weight Equivalent Output Circuit Equivalent Output Circuit C5 C6 C6 C7 C7 2 2 83.3 (3.28) 25.7(1.01) C 54.3(2.14) 80 (3.15) L L Electronic 5–36VDC Over Current Output trips at 6A min., 12A max. 5–36VDC Protection 36VDC Max.Commons Load Voltage Commons 75eA Max. Leakage Current with the I/O C0 C0 C1 C19.2 C2 (0.36) C2 C3 C3 C4 C4 C5 C5 C6 C6 C7 C7 (3.5) C0 C0 C1 C1 C2 C289 C3 C3 C4 C4 C5 C5 C6 C6 C7 C7 Max. ON State Voltage identify the 0.3 VDC @ 2.0 A, 0.15 V @ 1A 8.1 (0.32) Drop 5A for 20ms Inrush Current 8.1 (0.32) < 3es OFF to ON Response –––– USER BUS 2 –––– –––– USER BUS 1 –––– –––– USER BUS 2 –––– –––– USER BUS 1 –––– T1H–08TDS 6 6 7 7 < 100es ON to OFF Response 200mA max. Base Requirements No connection: ThePower 8 User Bus 1 terminals are No connection: The 8 User Bus 1 terminals are T1H–08TDS 54.3(2.14) 80 (3.15) Sourcing L Max. Load Current Examples 5–36 VDC T1H–08TDS 3 4 4 5 5 6 6 7 7 36VDC 40VDC 5–36VDC Sinking 2A / pt., 16A / module, 32!F to 140!F Sourcing Sinking Examples (0!C to 60!C) Examples Examples 2 3 25.7(1.01) L L T1H-08TDS 54.3(2.14) 80 (3.15) 1 8 (isolated) Output Points 25.7(1.01) 0 0 Output Points Commons Per Module Operating Voltage Range 1 2 2 3 3 4 4 5 5 6 6 7 7 Max. Voltage 0 0 1 1 2 Output Clamp Voltage 5–36VDC 89 (3.5) 8.1 (0.32) L 5 6 6 Top Row Side 7 7 View 5–36VDC Inernal Module Circuitry COM L 5–36VDC 5-36 VDC 5 Opto Out Isolator To LED L Sinking Opto Isolator Commons To LED C0 C0 C1 C1 C2 C2 C3 C3 C4 C4 C5 C5 C6 C6 C7 C7 Side View –––– USER BUS 1 –––– Sinking (Low Side Switching) odule Circuitry 3 3 Equivalent Output Circuit –––– USER BUS 2 –––– Bottom Row Inernal Module Circuitry L Opto Isolator To LED 5-36 VDC No connection: The 8 User Bus 1 terminals are bussed together. The 8 User Bus 2 terminals are also bussed together. COM Out Opto Isolator To LED 1 2 3 4 5 6 7 8 9 10 11 12 13 14 A B C D Note: Apply the labels that come with the I/O module to the I/O base to properly identify the terminal points. 3 Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. A - T1H-DM-M 5–13 Chapter 5: Specifications - Discrete I/O Modules T1K-08TA - AC Output Specifications 8 9.2 (0.36) COM 1 17-240 VAC V0 2, (10A, 250V / common), (4 pts. / fuse) 5 x 20 mm type 8.1 (0.32) 140g V1 –V 1 not used with AC Output Modules V0 Points 0.5A V1 Date Code: 00Z and later V 0–V 1 not used with AC Output Modules Derating Chart 0.5A 8 0.75A Points 1.0A 8 6 Date Code: 008 Derating Chart 0.75A 4 0.5A 2 6 0.75A 0 4 50 55 °C 122 131 2 °F /°F) Points 1.0A 8 0 32 0 0 32 Internal Module Circuitry Output 0 1 2 3 4 5 6 7 3 4 5 6 7 3 4 5 6 7 Output Points mm (in.) 0 1 2 3 4 5 6 Top Row 7 8.1 (0.32) 83.3 (3.28) mm (in.) 83.3 (3.28) 17-240 VAC 0.75A COM 0 17-240 VAC COM 1 1.0A Commons Bottom 10 20 30 40Side 50View 55 °C Row 50 68 86 104 122 131 °F V0 V1 Ambient Temperature ( °C/°F) V 0–V 1 not used with AC Output Modules Side View Equivalent Output Circuit +V Internal Module Circuitry To LED +V Optical Isolator COM 10 A 17-240 VAC 5–14 2 2 0 1 2 3 4 5 6 7 0.5A Output 10 A 1 1 T1K–08TA 1.0A 4 10 20 30 40 50 55 °C 50 68 86 104 122 131 °F 2 Ambient Temperature ( °C/°F) 10 20 30 40 50 55 °C 50 68 86 104 122 131 °F Ambient Temperature ( °C/°F) 0 0 Date Code: 00Z and later Derating Chart 6 0 0 32 8.1 (0.32) 80 (3.15) 7 54.3(2.14) COM 0 6 FU2 80 (3.15) 4 5 FU1 48 (1.89) 54.3(2.14) 3 T1K-08TA 25.7(1.01) 0 1 2 48 (1.89) 2, 4 pts. / common (Isolated) 8.1 (0.32) 17–240 VAC (47–63 Hz) 15–264 VAC (47–63 Hz) min. 9.2 / max. (0.36) 1A / pt., 4A / common (Subject to derating) 1.5 VAC @ > 50mA, 4.0 VAC @ < 50mA T1K–08TA 4mA @ 264VAC 0 1Fuses 2 3located 4 5 6 7 under top cover 10A for 10ms 10mA < 1ms 0 1 2 3 4 5 6Fuses 7 located 17-240 VAC< 1ms + 1/20cycle 1 2 3 4 5 6under 7 top cover 250mA @ 5 VDC Logic Side COM 0FU1 ONCOM = fuse1 1 blown 17-240 VAC FU2 ON = fuse 2 blown 25.7(1.01) Per Module 1 Outputs Commons Per Module Output Points Voltage Range 2 Operating Output Voltage Range Max. Load Current Output Points 3 ON Voltage Drop Max. Leakage Current Inrush Current 4 Max. Min. Load OFF to ON Response 5 ON to OFF Response Base Power Requirements Status Indicators 6 Commons Error Status Indicators (LEDs) 7 Fuses (User Replaceable) Commons T1K-FUSE-2 8 Weight 9 10 11 12 13 Equivalent Output Circuit 14 A B C D To LED Optical Isolator COM Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. A - T1H-DM-M Chapter 5: Specifications - Discrete I/O Modules T1K-16TA - AC Output 89 (3.5) 9.2 (0.36) 8.1 (0.32) FU1 FU3 FU2 FU4 TA 0 0 1 1 2 2 3 3 4 4 5 5 6 6 89 (3.5) 7 7 8 8 9 10 11 12 13 14 15 9 10 11 12 13 14 15 8.1 (0.32) 255.47.(31(2 .0.114) ) 80 (3.15) TA mm (in.) Commons 17-240 VAC Date Code: 012 and Later V 0 Derating V 1 ChartV 2 Output Points V3 83.3 (3.28) 8.1 (0.32) 0.5A mm (in.) 0.75A 12 Date Code: 012 and Later Derating Chart 8 4 0 32 83.3 (3.28) 1.0A Points 16 0 Top Row 0 1 2 3 4 5 6 7 8 9 1011 1213 1415 V 0 – V 3 not used with AC Output Modules Points 16 54.3(2.14) 80 (3.15) T1K-16TA 25.7(1.01) Specifications 16 Outputs Per Module 4, 4 pts. / common (Isolated) Commons Per Module 17–240 VAC (47–63 Hz) Operating Voltage Range Output Voltage Range Output Points15–264 VAC (47–63 Hz) min. / max. 1A / pt., 4A / common (Subject to derating) Max. Load Current Fuses located 1 2 3 4Drop 5 6 7 8 9 10111.5 1213 VAC1415 @ > 50mA, 4.0under VACtop @ cover < 50mA ON0 Voltage 9.2 (0.36) 4mA @ 264VAC Max. Leakage Current 10A for 10ms Max. Inrush Current 10mA Min. Load 1ms OFF to ON Response Output50mA, 4.0 VAC @ < 50mA ON Voltage Drop Fuses 2 3 4 5 6 7 under@ top264VAC cover 4mA Max. Leakage Current 9.2 (0.36) Note: Apply the labels that come with the I/O 10A for 10ms Max. Inrush Current module to the I/O base to properly identify the 10mA Min. Load terminal points. < 1ms OFF to ON Response < 1ms + 1/2 cycle ON to OFF Response Output Points 1 C2 C3 C4 C5 C6 C7 300mA @ 5VDC Base Power Fuses located 0 Requirements 1 2 3 4 5 6 7 undertop cover Logic Side Status Indicators Commons Optical Isolator COM Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. A - T1H-DM-M Chapter 5: Specifications - Discrete I/O Modules T1K-08TR48 -(1.89) Relay Output 9.2 (0.36) 8.1 (0.32) Specifications Outputs Per Module Output Type Commons Per Module OperatingT1K–08TR Voltage Range t To LED T1K-08TR FU1 80 (3.15) 54.3(2.14) 8 Relay Form A (SPST) normally open 2, 4 pts. / common (Isolated) 6–240 VAC (47–63 Hz), 6–27 VDC Fuses located 5–264 VAC (47–63 Hz) min. / max. undertopOutput cover Voltage Range 5–30 VDC min / max 2A / pt., 8A / common Max. Load Current Max. Leakage 0 1 Current 2 3 4 5 6 0.1 7 mA @ 264VAC 6–27 VDC 0 1Current 2 3 4 5 6 6A 7 for 10ms / pt.; 20A for 10ms / common Max. Inrush 6–240 VAC 5mA @ 5VDC Min. Load <15ms OFF to ON Response <10ms ON to OFF Response Base Power Requirements 350mA @ 5VDC Logic Side Status Indicators Error Status Indicators FU1 ON = fuse 1 blown 8.1 (0.32) FU2 ON = fuse 2 blown (LEDs) 0 1 1 2 2 3 4 5 6 7 3 4 5 6 7 25.7(1.01) 0 FU2 Fuses (User Replaceable) T1K-FUSE-2 Weight 9.2 (0.36) Output Points 0 1 2 (10A, 250V / common), (4 pts. / fuse) 5 x 20 mmmm type(in.) 110g 0 1 83.3 (3.28) 2 3 4Points 5 6 Output 2 3 4 5 6 7 7 Top Row Fuses located undertop cover Typical Relay Life (Operations) at Room Temperature Voltage & Type of Load Load Current 1A 2A 24VDC Resistive 24VDC Solenoid 110VAC Resistive 110VAC Resistive 220VAC Resistive 220VAC Resistive 500K 250K 100K 50K 500K 250K 200K 100K 350K 200K Side View 100K 50K 6–27 VDC 6–240 VAC COM 0 6–27 VDC 6–240 VAC COM 0 6–27 VDC 6–240 VAC COM 1 6–27 VDC 6–240 VAC COM 1 Commons Commons V0 V1 Bottom Row V0 V1 V 0, V 1 not used with Relay V 0, V 1Modules not used with Relay Output 8.1 (0 Output Modules Points Derating Chart 8 1.5A 6 2.0A Equivalent Output Circuit Internal Module Circuitry 4 2 +V Output 0 0 32 10 20 30 40 50 55 °C 50 68 86 104 122 131 °F Ambient Temperature ( °C/°F) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 A B C D L To LED AC or DC Supply 10A COM 6–27 VDC 6–240 VAC Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. A - T1H-DM-M 5–17 P Chapter 5: Specifications - Discrete I/O Modules 36) 89 (3.5) T1K-16TR - Relay Output 8.1 (0.32) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 A B C D Specifications Outputs Per Module Output TR Type Commons Per Module Operating Voltage Range ED 80 (3.15) T1K-16TR FU1 FU3 FU2 FU4 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 10 11 12 13 14 15 9 10 11 12 13 14 15 25.7(1.01) 54.3(2.14) 16 Relay Form A (SPST) normally open 4, 4pts. / common (Isolated) located op cover 6–240 VAC (47– 63 Hz), 6–27 VDC 5–264 VAC (47–63 Hz) min / max Output Voltage Range 5–30 VDC min / max 2A / pt., 6A / common Max. Load Current 0.1 mA @ 264VAC Max. Leakage Current 27 VDC 6A for 10ms / pt.; 20A for 10ms / common Max. Inrush Current 240 VAC 5mA @ 5VDC Min. Load < 15ms OFF to ON Response < 10ms ON to OFF Response 700mA @ 5VDC Base Power Requirements 8.1 (0.32) Status Indicators Logic Side FU1 / FU2 ON = fuse 1 or fuse 2 blown Error Status Indicators FU3 / FU4 ON = fuse 3 or fuse 4 blown (LEDs) mm (in.) Fuses (User Replaceable) 4 (10A, 250V / common), (4pts. / fuse) 5 x 20 mm type T1K-FUSE-2 83.3 (3.28) 200g Weight Typical Relay Life (Operations) at Room Temperature Voltage & Type of Load 24VDC Resistive 24VDC Solenoid 110VAC Resistive 110VAC Resistive 220VAC Resistive 220VAC Resistive Load Current 1A 2A 500K 100K 500K 200K 350K 100K 250K 50K 250K 100K Side View 200K 50K 9.2 (0.36) Output Points Row Fuses located undertop cover Fuses located undertop cover 0 1 2 3 4 5 6 7 8 9 1011 12 13 1415 COM 0 COM 1 COM 0 COM 2 COM 1 COM 3 COM 2 8.1 TR Output Points 0 1 2 3 4 5 6 7 8 9 1011 12 13 1415 Top COM 3 6-27 VDC 6-240 VAC Commons 6-27 VDC 6-240 VAC6-27 VDC Commons 6-240 VAC V0 V1 V2 6-27 VDC 6-240 VAC V3 8.1 (0.32) Bottom 2 V3 0 with Relay V 1 Output VModules V 0 – V 3 notVused Row V 0 – V 3 not used with Relay Output Modules 8.1 (0.32) Date Code: 012* and later Derating Chart Points 16 Equivalent Output Circuit 1.0A 1.5A Internal Module Circuitry 12 2.0A 8 Output 4 +V L 0 0 32 10 20 30 40 50 55 °C 50 68 86 104 122 131 °F Ambient Temperature ( °C/°F) To LED AC or DC Supply 6-27 VDC 6-240 VAC 5–18 9.2 (0.36) 10 A COM Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. A - T1H-DM-M Poin 16 Chapter 5: Specifications - Discrete I/O Modules T1K-08TRS - Isolated Relay Output Specifications 9.2 (0.36) Outputs Per Module Output Type Commons Per Module (3.5) Operating Voltage89Range 8 Relay Form A (SPST) normally open T1K-08TRS 8, 1pt. / common (isolated) 6–240 VAC (47–63 Hz), 6–27 VDC 5–264 VAC (47–63 Hz) min. / max. 0 1 2 3 4 5 6 5–30 VDC min. / max. 0 1 2 3 4 5 6 7A / pt. common (Subject to derating) 0.1 mA @ 264VAC 8A for 10ms 5mA @ 5VDC < 15ms < 10ms 400mA @ 5VDC Logic Side FU1 / FU2 ON = fuse 1 or fuse 2 blown Output Points FU3 / FU4 ON = fuse 3 or fuse 4 blown FU5 / FU6 ON = fuse 5 or Note: fuse 6 blown Apply the labels that come 0 1 2 3 with 4 the5 I / O 6 FU7 / FU8 ON = fuse 7 or fuse 8 blown module to the I / O base to properly identify the 8 (10A, 250V / common), (1 pt. / fuse) terminal points. NQ3-10 SOC Corp. 185g Output Points mm (in.) 8.1 (0.32) Output Voltage Range 27 VDC 240 VAC Fuses (User Replaceable) 8.1 (0.32) T1K-FUSE-3 Weight 0 Typical Relay Life (Operations) 83.3 (3.28) at Room Temperature To LED Load Current 2A 5A 1A 24VDC Resistive 24VDC Solenoid 110VAC Resistive 110VAC Resistive 220VAC Resistive 220VAC Resistive 1000K 300K 1000K 300K 500K 300K FU5 FU7 FU4 FU6 FU8 7 7 54.3(2.14) 80 (3.15) Error Status Indicators (LEDs) Voltage & Type of Load FU3 FU2 25.7(1.01) Fuses located under top cover Max. Load Current Max. Leakage Current Max. 08TRS Inrush Current Min. Load OFF to ON Response ON to OFF Response Base Power Requirements Status Indicators FU1 1 C0 C1 C2 C3 C4 2 3 4 5 6 C5 7 7 C6 Top Row 9.2 (0.36) C7 Fuses located under top cover Commons 6-27 VDC 6-240 VAC 7A V0 V1 Bottom Row V2 V3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 A B C D 500K 200K 100K C0 C1 C2 C3 C4 C5 C6 C7 Note: V 0 – V 3 not used on Relay Output Modules 100K * * Note: See other Commons 500K 200K 100K side for wiring VDC Note: Apply the labels that come with6–27 the I/O 6–240 VAC 100K * * example. module to the I / O base to properly identify the 250K 125K 60K terminal V0 V 1 points. V2 V3 8.1 (0.32) 100K * * Note: V 0 – V 3 not used on Relay Output Modules Side View *Solenoid (inductive) loads > 2A cannot be used. Equivalent Output Circuit Derating Chart Points 8 5A 6 6A 4 Internal Module Circuitry 4A +V Output L 7A 2 0 0 32 10 20 30 40 50 55 °C 50 68 86 104 122 131 °F Ambient Temperature ( °C/°F) To LED AC or DC Supply 10A COM 6–27 VDC 6–240 VAC Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. A - T1H-DM-M 5–19 Chapter 5: Specifications - Discrete I/O Modules 1 2 3 4 5 6 7 8 9 10 11 12 13 14 A B C D Notes: 5–20 Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. A - T1H-DM-M
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2016:10:19 16:38:55-04:00 Creator : Adobe InDesign CC 2014 (Windows) Modify Date : 2016:10:20 12:34:24-04:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2016:10:20 12:34:24-04:00 Creator Tool : Adobe InDesign CC 2014 (Windows) Instance ID : uuid:fd2214cf-e87d-44f4-8963-81288ef99cb7 Original Document ID : xmp.did:1011feb1-79a6-a144-9652-d1ea22320a92 Document ID : xmp.id:1a13047e-8444-8342-ad02-b4eff2cb5ecf Rendition Class : proof:pdf History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2014 (Windows) History Changed : / History When : 2016:10:19 16:38:55-04:00 Derived From Instance ID : xmp.iid:df331bcd-2772-ce47-adca-bb708c811ec1 Derived From Document ID : xmp.did:1011feb1-79a6-a144-9652-d1ea22320a92 Derived From Original Document ID: xmp.did:1011feb1-79a6-a144-9652-d1ea22320a92 Derived From Rendition Class : default Format : application/pdf Producer : Adobe PDF Library 11.0 Trapped : False Page Mode : UseOutlines Page Count : 20EXIF Metadata provided by EXIF.tools