2600_ds 2613 Cisco 2600 Series Routers Datasheet

User Manual: 2613

Open the PDF directly: View PDF .
Page Count: 10

Data Sheet
Cisco 2600 Series Modular Multiservice Router

Cisco Systems, Inc.

Page 1 of 10

DATA SHEET

Cisco 2600 Series

Modular Multiservice Router

Cisco Systems delivers enterprise/provider-class

versatility, integration, and power to branch

ofﬁces with the Cisco 2600 Series Modular

Multiservice Router Family.

The widely deployed Cisco 2600 Series provides

a cost-effective solution to meet today’s and

tomorrow’s branch ofﬁce needs for:

• Multiservice voice/data integration

• Virtual Private Network (VPN) access with

Firewall options

• Analog and digital dial access services

• Routing with Bandwidth Management

• Inter-VLAN routing

• Delivery of high-speed business class

DSL access

• Cost effective T1/E1 ATM access

ThemodulararchitectureoftheCisco2600Series

allows interfaces to be upgraded to accommodate

network expansion or changes in technology as

new services and applications are deployed. By

sharing modular interfaces with the Cisco 1600,

1700, and 3600 Series, the Cisco 2600 provides

unrivaled investment protection. The Cisco 2600

Series reduces the complexity of managing the

remote network solution by integrating the

functions of multiple separate devices into a

single, compact unit.

Driven by a powerful RISC processor along with

high-performance DSPs and auxiliary processors

on various interfaces, the Cisco 2600 Series

supports the advanced quality of service (QoS),

security, and network integration features

required in today’s evolving branch ofﬁces.

The Cisco 2600 Series is available in three

performance levels and six base conﬁgurations:

•Cisco 2650 and Cisco 2651— up to 37K

packets per second (pps), one and two

autosensing 10/100 Mbps Ethernet ports

•Cisco 2620 and Cisco 2621—up to 25K pps,

one and two autosensing 10/100 Mbps

Ethernet ports

•Cisco 2610 through Cisco 2613—up to 15K

pps

– Cisco 2613—One Token Ring port

– Cisco 2612—One Ethernet port, one

Token Ring port

– Cisco 2611—Two Ethernet ports

– Cisco 2610—One Ethernet port

Each model also has two WAN Interface Card

slots,oneNetworkModuleslot,andanAdvanced

Integration Module (AIM) slot. These slots share

more than 50 different modules across four Cisco

product lines.

Cisco Systems, Inc.

Page 2 of 10

Figure 1 Cisco 2600 Series Modular Access Routers

The WAN Interface Cards available for the Cisco 1600,

1700, 2600, and 3600 routers support a variety of serial,

Integrated Services Digital Network Basic Rate Interface

(ISDN BRI), and integrated channel service unit/data

service unit (CSU/DSU) options for primary and backup

WAN connectivity. Network modules available for the

Cisco 2600 and 3600 Series support a broad range of

applications, including multiservice voice/data integration,

analog and ISDN dial access, and serial device

concentration.

The field-installable AIMs supported on all Cisco 2600

Seriesmodels and theCisco3660,enhancethe performance

of the router by off-loading compute-intensive function(s)

onto a dedicated coprocessor while preserving external

interfaceslotsforotherapplications.Various AIMs support

high-performance hardware-assisted data compression or

data encryption (ideal for VPNs). The new AIM-ATM

enables cost-effective ATM over one to four T1/E1

connections, or when used with the high density packet

voice network modules, Voice over ATM (VoATM) can

be provisioned.

Key Benefits

AspartoftheCiscocomprehensiveend-to-endnetworking

solution, the Cisco 2600 Series allows businesses to extend

a cost-effective, seamless network infrastructure to the

branch office with the following benefits:

•Investment protection—Because the Cisco 2600

Series supports field-upgradable modular

components, customers can easily change network

interfaces without a “forklift upgrade” of the entire

branch office network solution. The AIM slot of the

Cisco 2600 platform further protects investments by

offering the expandability to support advanced

services such as hardware-assisted data compression,

data encryption, or ATM data/voice access.

•Lower cost of ownership—By integrating the

functions of CSU/DSUs, ISDN Network Termination

(NT1) devices, ﬁrewall, modems, compression or

encryption devices, and other equipment found in

branch ofﬁce wiring closets in a single, compact unit,

the Cisco 2600 Series provides a space-saving solution

that can be managed remotely using network

management applications such as CiscoWorks and

CiscoView.

•Multiservice voice/data integration—Cisco offers the

industry’s broadest, scalable multiservice voice/data

integration solution set. The Cisco 2600 Series allows

network managers to reduce long-distance interofﬁce

calling costs and enables next-generation applications

such as integrated messaging and Web-based call

centers. Using the Voice/Fax modules, the Cisco 2600

may be deployed in both Voice over IP (VoIP) and

Voice over Frame Relay (VoFR) networks. The packet

voice trunk network module supports up to 60

simultaneous voice calls in a Cisco 2600 as well as

supporting routing and other services. When used

with the ATM-AIM, VoATM using AAL2 or AAL5

can be deployed.

•Enterprise/Provider class solution—Meets the

requirements of multiservice enterprises and their

managed service CPE providers with high reliability

features,multiple WANconnections,and theabilityto

migrate from data-only to TDM voice and data to

packetized voice and data infrastructure.

Cisco Systems, Inc.

Page 3 of 10

Key Features and Benefits

The Cisco 2600 Series brings a cost-effective combination of versatility, integration, and power to remote branch ofﬁces with

the key features listed in Table 1.

Table 1 Key Features and Beneﬁts of the Cisco 2600 Series

Features Benefits

Versatility and Investment Protection

Modular Architecture • Network interfaces are ﬁeld-upgradable to accommodate future technologies while

providing a solution to meet today’s needs

• Additional interfaces can be added on a “pay as you grow” basis to accommodate

network growth

• LAN and WAN interface conﬁguration is easily customized for individual needs

WAN Interface Cards and Network Modules

Shared with Cisco 1600, 1700, and 3600 Series

Routers

• Reduced cost of maintaining inventory of Cisco 1600, 1700, 2600, and 3600 Series

modular components

• Lower training costs for support personnel

Multiﬂex Voice/WAN Interface Card Support • Can be used for WAN (data-only) connectivity then re-deployed to support

channelized voice and data, or packet voice applications

Advanced Integration Module Slot • Expandability for integration of advanced high performance services such as

hardware-assisted data compression, encryption, and ATM access

• Maximizes performance by off-loading processor intensive applications to a

coprocessor

DC Power Supply Option • Allows deployment in DC power environments such as telecommunications carrier

central ofﬁces

Enterprise/Managed Service CPE-Class Performance

High-Performance RISC Architecture • Support for advanced QoS features such as the Resource Reservation Protocol

(RSVP), Weighted Fair Queuing (WFQ), and IP Precedence to reduce recurring WAN

costs

• Enables security features such as data encryption, tunneling, and user

authentication and authorization for VPN access

• ICSA-certiﬁed Cisco IOS® Firewall feature sets provide support for advanced

security features such as Context-Based Access Control (CBAC), Java blocking,

denial of service protection, intrusion detection, and audit trails

• Support for cost-effective, software-based data compression and data encryption

• Integration of legacy networks via data link switching plus (DLSW+) and Advanced

Peer-to-Peer Networking (APPN)

• High-speed routing performance of up to 37,000 packets per second for maximum

scalability to support more concurrent functions (Cisco 2650 and Cisco 2651)

Full Cisco IOS Software Support • Supports the same IOS software Feature Sets as the Cisco 2500 and 3600 Series

Simplified Management

Integrated CSU/DSU, Analog Modem, DSL CPE/

Modem, and NT1 Options • Enables remote management of all Customer Premise Equipment (CPE) elements

for higher network availability and lower operational costs

Support for CiscoWorks and CiscoView • Allows simpliﬁed management of all integrated and stackable components

Support for Cisco Voice Manager (CVM) • Reduces the cost of deploying and managing integrated voice/data solutions

Cisco Systems, Inc.

Page 4 of 10

Figure 2 Cisco 2600 Series Back Panel View (Cisco 2611 shown)

Hardware/Software Options

Cisco 2600 Series routers offer a choice of Ethernet, Token Ring, and autosensing 10/100 Ethernet LAN interfaces. In

addition, each model features two WAN Interface Card slots, one Network Module slot, and an AIM slot as well as one

115.2 Kbps console port and one 115.2Kbps auxiliary asynchronous port.

Enhanced Setup Feature • Context-sensitive questions guide the user through the router conﬁguration

process, allowing faster deployment

Support for Cisco AutoInstall • Conﬁgures remote routers automatically across a WAN connection to save cost of

sending technical staff to the remote site

Part of Cisco’s Enterprise Stackable Solutions • Can be stacked with LAN switches such as the Catalyst® 1900 or 2820XL for

simpliﬁed management

VLAN Support • Enables inter-VLAN routing via the Cisco Inter-Switch Link (ISL) protocol and 802.1Q

(Requires a Cisco IOS “Plus” feature set. ISL supported on Cisco 262x and

265x only)

Reliability

Redundant Power Supply Option • RPS can be shared with other network components such as the Cisco Catalyst 1900

Series to protect the network from downtime due to power failures

Dial-on-Demand Routing • Allows automatic backup of WAN connection in case of a primary link failure

Dual Bank Flash Memory • Backup copy of the Cisco IOS software can be stored in Flash memory

Ergonomic Design

LED Status Indicators • Provide at-a-glance indications for power, RPS status, network activity, and interface

status

All Network Interfaces Located on Back of Unit • Simpliﬁes installation and cable management for maximum uptime

Easy-to-Open Chassis Design • Allows fast and easy access for installation of memory or AIM

Multispeed Fan • Enables quiet operation in ofﬁce environments

Table 1 Key Features and Beneﬁts of the Cisco 2600 Series (Continued)

Features Benefits

SEE MANUAL BEFORE INSTALLATION

SERIAL 1

SERIAL 0

CONN CONN WIC

2A/S

SEE MANUAL BEFORE INSTALLATION

SERIAL 1

SERIAL 0

CONN CONN WIC

Cisco 2611

100-240V– 1A

50/60 Hz 47 W

AUX

CONSOLE

ETHERNET 0 ACT

LINKACTETHERNET 1LINK

12298

Network module slot WIC slots

Ethernet ports Auxiliary port

Console port

Cisco Systems, Inc.

Page 5 of 10

Network Module Options

Network modules enable the Cisco 2600 Series to be customized to meet the needs of virtually any branch ofﬁce. These

modules support a broad range of applications, including multiservice voice/data integration, analog and ISDN dial access,

and serial device concentration or ATM access. The Cisco 2600 Series share network modules with the higher performance

Cisco 3600 Series and supports the more than 30 network modules listed in Table 2.

Table 2 Network Modules for Cisco 2600 Series, shared with the Cisco 3600 Series

Module Description Module Description

Serial and ATM Network Modules (requires IOS release 11.3 (3)T or later)

NM-4T1-ATM1, 2 Four-port T1 ATM with IMA network

module NM-8T1-ATM1, 2 Eight-port T1 ATM with IMA network

module

NM-4E1-ATM1, 2 Four-port E1 ATM with IMA network

module NM-8E1-ATM1, 2 Eight-port E1 ATM with IMA network

module

NM-1A-T31, 4 One-Port DS3 ATM Network Module NM-1A-E31, 4 One-port E3 ATM Network Module

NM-16A Sixteen-port high density async network

module NM-32A Thirty-two-port high density async

network module

NM-4A/S Four-port low speed (128 Kbps max)

async/sync serial network module NM-8A/S Eight-port low speed (128 Kbps max)

async/sync serial network module

LAN/LAN to LAN Network Modules (requires IOS release 11.3 (4) T or later)

NM-1E One-port Ethernet network module NM-4E Four-port Ethernet network module

NM-1ATM-251One-port ATM 25Mbps network module NM-2W Two-WAN interface card slot network

module (WAN interface cards offered

separately)

Dial, ISDN, and Channelized Serial Network Modules (requires IOS release 11.3 (4) T or later)

NM-1CT1 One-port channelized T1/ISDN PRI

network module NM-1CT1-CSU One-port channelized T1/ISDN PRI with

CSU network module

NM-2CT1 Two-port channelized T1/ISDN PRI

network module NM-2CT1-CSU Two-port channelized T1/ISDN PRI with

CSU network module

NM-1CE1B One-port channelized E1/ISDN PRI

balanced network module NM-1CE1U One-port channelized E1/ISDN PRI

unbalanced network module

NM-2CE1B Two-port channelized E1/ISDN PRI

balanced network module NM-2CE1U Two-port channelized E1/ISDN PRI

unbalanced network module

NM-4B-S/T Four-port ISDN BRI network module (S/T

interface) NM-4B-U Four-port ISDN BRI with NT-1 network

module (U interface)

NM-8B-S/T Eight-port ISDN BRI network module (S/

T interface) NM-8B-U Eight-port ISDN BRI with NT-1 network

module (U interface)

NM-8AM Eight analog modem network module NM-16AM Sixteen analog modem network

module

Voice/Fax Network Modules (requires IOS release 11.3 (2) or later)

NM-HDV-1T1-241, 2 Twenty-four-channel T1 high density

voice/fax network module NM-HDV-1E1-301, 3 Thirty-channel E1 high density voice/fax

network module

NM-HDV-1T1-24E 1, 2 Twenty-four-channel T1 enhanced high

density voice/fax network module NM-HDV-1E1-30E1, 3 Thirty-channel enhanced E1 high

density voice/fax network module

Cisco Systems, Inc.

Page 6 of 10

NM-HDV-2T1-481, 2 Forty-eight-channel T1 high density

voice/fax network module NM-HDV-2E1-601, 3 Sixty-channel E1 high density voice/fax

network module

NM-HDV=1, 2 High-density voice module, spare (no T1

or DSPs) NM-1V1One-slot voice/fax network module

NM-2V1Two-slot voice/fax network module

Alarm Interface Controller (AIC) Network Module

NM-AIC-64 Alarm monitoring and control network

module; 64 contact points and 16 control

points

1. The voice/fax and ATM network modules require a Cisco IOS Plus feature set.

2. Requires Cisco IOS Version 12.05XK or later.

3. Requires Cisco IOS Version 12.07XK or later.

4. Requires Cisco IOS Version 12.1.2T or later.

Table 2 Network Modules for Cisco 2600 Series, shared with the Cisco 3600 Series (Continued)

Module Description Module Description

Table 3 Voice Interface Cards (VICs) for use with the Voice/

Fax Network Modules Also see the new Multiﬂex Voice/WAN Interface Cards

(VWICs) in Table 4.

Multiflex Voice/WAN Interface Card and

WAN Interface Card Options

The Cisco 2600 Series WIC slots now support 19

interface cards with the introduction of the new 1 port

G.shdsl and 1 or 2 port analog modem WAN Interface

Cards. Most of these interface cards are available for the

Cisco 1600, 1700 and 3600 Series, including the new

singleand dual port MultiﬂexVWICsand dual port serial

WAN Interface Cards to maximize interface density and

slot efﬁciency.

The Cisco 2600 Series of modular routers support both

ADSL and the new G.shdsl WAN Interface Cards. These

offeringsbringhighspeedbusiness class broadband service

to the award winning Cisco 2600 Series of multiservice

routers. Now small- to medium-businesses, enterprise

branch offices, and service provider managed service users

can take advantage of a highly flexible and scalable

solution for data only or voice and data integration, with

secure VPN options.

The single and dual port Multiflex VWICs combine WAN

Interface Card and VIC functionality to provide

unparalleled flexibility, versatility, and investment

protectionfrom its many uses.Supportingup to T1and E1

rates with integrated T1 CSU/DSUs or E1 DSUs, the

Multiflex VWICs can be used in data-only, channelized

(dropandinsert)voice/dataintegrationapplicationsaswell

Module Description

VIC-2BRI-S/T-TE1

1. Supported with Cisco IOS 12.0(3)T or later

2. Supported with Cisco IOS 12.1(2)XH or later

Two-port BRI S/T terminal equipment

voice/fax interface card for voice/fax

network module

VIC-2FXS Two-port FXS voice/fax interface card

for voice/fax network module

VIC-2FXO-M12Two-port FXO voice/fax interface card

for voice/fax network module with

Caller ID and supervisory disconnect

(North American version and other

countries)

VIC-2FXO Two-port FXO voice/fax interface card

for voice/fax network module (North

American version and other

countries)

VIC-2FXO-M22Two-port FXO voice/fax interface card

with Caller ID and supervisory

disconnect (Europe version)

VIC-2FXO-EU Two-port FXO voice/fax interface card

(Europe version)

VIC-2FXO-M3 Two-port FXO voice/fax interface card

for Australia

VIC-2E/M Two-port E&M voice/fax interface

card for voice/fax network module

Cisco Systems, Inc.

Page 7 of 10

as packet voice/data connections to a PBX or the PSTN

(packet voice requires the use of the high density voice

trunk network module). Unlike Old World multibox voice

and data components, when used in a Cisco 2600 or 3600,

the T1/E1 Multiflex VWICs deliver a single-box voice and

data platform providing a graceful migration from data

only, to channelized voice and data, to packet voice and

data.

Figure 3 Dual-Port Multiﬂex T1 VWIC with Drop and Insert

The dual-port serial WAN Interface Cards feature Cisco’s

new, compact, high-density Smart Serial connector to

support a wide variety of electrical interfaces when used

with the appropriate transition cables. Ports on each card

can be conﬁgured individually to support a variety of

synchronous or asynchronous protocols.

Figure 4 Dual-Port High-Speed Serial WAN Interface

Card (up to 8 Mbps/card)

Figure 5 Dual-Port Async/Sync Serial WAN Interface

Card (up to 128 Kbps/port)

With two WAN Interface Card slots per chassis, the

Cisco 2600 Series supports the WAN Interface Cards

in Table 4.

Table 4 Multiflex Voice/WAN and WICs for Cisco 2600

Series

SEE MANUAL BEFORE INSTALLATION

SERIAL 1

SERIAL 0

CONN CONN

WIC

H11496

Serial ports

CONN LEDs

SEE MANUAL BEFORE INSTALLATION

SERIAL 1

SERIAL 0

CONN CONN

WIC

2A/S

H11497

Serial ports

CONN LEDs

Module Description

VWIC-1MFT-T11

1. Requires Cisco IOS 12.0(5)XK or later.

One-port T1/Fractional T1 Multiﬂex

Trunk with CSU/DSU

VWIC-2MFT-T11Dual-port T1/Fractional T1 Multiﬂex

Trunk with CSU/DSU

VWIC-2MFT-T1-DI1 Dual-port T1/Fractional T1 Multiﬂex

Trunk with CSU/DSU and Drop &

Insert

VWIC-1MFT-E11One-port E1/Fractional E1 Multiﬂex

Trunk with DSU

VWIC-2MFT-E11Dual-port E1/Fractional E1 Multiﬂex

Trunk with DSU

VWIC-2MFT-E1-DI1Dual-port E1/Fractional E1 Multiﬂex

Trunk with DSU and Drop & Insert

VWIC-1MFT-G7032

2. Requires Cisco IOS 12.1(1)T or later.

One-port G.703 Multiﬂex Trunk

VWIC-2MFT-G7032Dual-port G.703 Multiﬂex Trunk

WIC-1DSU-T1 T1/Fractional T1 CSU/DSU (requires

Cisco IOS Version 11.3 [4] T or later)

WIC-1DSU-56K4 One-port four-wire 56/64 Kbps CSU/

DSU

WIC-1T One-port high speed serial

WIC-2T Dual-port high speed serial

WIC-2A/S Dual-port async/sync serial

WIC-1B-S/T One-port ISDN BRI

WIC-1B-U One-port ISDN BRI with NT1

WIC-1ADSL3

3. Requires Cisco IOS 12.1(5)YB, 12.2(2)XK, 12.2(4)T or later.

One-port ADSL interface

WIC-1SHDSL4

4. Requires Cisco IOS 12.2(4)XL or later.

One-port G.shdsl interface

WIC-1AM5

5. Requires Cisco IOS 12.2(2)XB or later.

One-port analog modem

WIC-2AM5Two-port analog modem

Cisco Systems, Inc.

Page 8 of 10

Advanced Integration Module Options

All Cisco 2600 models are equipped with an internal

slot to support one field-installable AIM. AIMs use

function-specific hardware to off-load the main router

CPU and accelerate processor- or resource-intensive

services, yielding dramatically higher throughput and

higher performance than a software-only implementation.

The AIM slot has access to virtually all of the router’s

resources, including the main system bus. TDM bus and

the serial communications controllers making it a very

flexible and powerful feature. Since the AIM is internally

mounted, external slots remain available for integration of

other modular components such as CSU/DSUs, WAN

interfaces, or other devices such as modems, or packetized

voice/fax processors.

The Data Compression AIM provides a cost-effective

option for reducing recurring WAN costs and maximizes

the benefit of the advanced bandwidth management

features of the Cisco IOS software. With compression

ratios of up to 4:1, the Data Compression AIM supports

8Mbps of compressed data throughput without

imposing additional traffic latency—enough to keep two

T1 or E1 circuits full of compressed data in both

directions simultaneously. The Data Compression

AIM supports industry standard LZS and Microsoft

Point-to-Point Compression (MPPC) algorithms and

ensurescompatibility with all Cisco productssupporting

hardware- or software-based compression.

TheData Encryption AIMofﬂoadsencryption processing

from the Cisco 2600 Series CPU, providing 10 times

the performance over software-only encryption. The

AIM-VPN/BP supports a maximum number of 300

remote access tunnels, while the new AIM-VPN/EP

provides support for a maximum number of 800 remote

access tunnels. The AIM-VPN/EP is designed to take

advantage of the performance power of the Cisco 265x

Series and is recommended with this series only.

ThenewAIM-ATMmodule providesa high-performance

hardware-based ATM access solution for one to four T1

or E1 connections supported by the T1 or E1 VWICs (for

example, VWIC-IMFT-T1). This frees the network

module slot to support other functions. When used in

combination with a high density voice network module

(NM-HDV-xxx), the ATM AIM supports ATM adaption

layer (AAL) 2 and AAL5 VoATM.

Table 5 AIM for the Cisco 2600 Series

Alarm Interface Controller Network Module

The Alarm Interface Controller (AIC) is a network module

that greatly expands the network monitoring and control

capabilities of the Cisco 2600 and 3600 Series routers. The

AIC functions as an integrated entity residing within the

Cisco 2600 Router to provide network alarm monitoring

and remote control of network elements. The AIC reduces

service provider and enterprise operating expenses by

facilitating a single “box,” doing away with the need for a

dedicated external alarm monitoring device. This greatly

simplifies network layout, monitoring, and control

resulting in lower operations, administration,

maintenance, and provisioning (OAM&P) costs. The AIC

is supported in Cisco IOS 12.2 (2) XG and 12.2(7)T. The

AIC network module supports 64 discrete alarm inputs, of

which 8 of the last 64 alarm points are

software-configurable to accept either analog or discrete

inputs. The AIC further supports 16 control relays to

facilitate the remote control of network elements.

Table 6 Alarm Interface Controller Network Module

Module Description

AIM-COMPR2 Data Compression AIM for the Cisco

2600 Series (requires IOS software

release 12.02T or later)

AIM-VPN/BP DES/3DES VPN Encryption Module

for the Cisco 2600—Base

Performance (requires IOS software

release 12.1(3)XI or later)

AIM-VPN/EP1

1. Recommended with the Cisco 265x only.

DES/3DES VPN Encryption Module

for the Cisco 2600—Enhanced

Performance (requires IOS software

release 12.2(2)T or later)

AIM-ATM High Performance ATM AIM (requires

Cisco IOS software release 12.2(2)XA,

12.2(4) T or later)

Module Description Cisco IOS Version

NM-AIC-64 Alarm monitoring and

control network module;

64 contact points and 16

control points

12.2(2)XG and 12.2(7)T

Cisco Systems, Inc.

Page 9 of 10

Cisco IOS Software

Modeled after the Cisco 2500 and 3600, the Cisco

2600 Series supports a full range of Cisco IOS features.

With 20 different feature sets, a wide variety of intranet,

multiprotocol, QoS, and legacy IBM applications in use

today are supported. The Cisco 2600 Series offers four

base protocol feature sets and a combination of premium

feature options including the Plus, encryption, and

ﬁrewall feature sets.

The base feature sets are:

•IP

• IP/IPX/AppleTalk/DEC

• Enterprise

• Enterprise SNA Switch (formerly APPN)

The Base feature sets support popular protocols and

standards such as NAT, OSPF, Border Gateway Protocol

(BGP), Remote Access Dial-In User Service (RADIUS),

IP Multicast, RMON, and WAN optimization features

(such as Bandwidth on Demand; Custom, Priority and

Weighted Fair Queuing, Dial Back-up, and RSVP).

The following Premium features are offered in

combination with the above base feature sets:

• Plus

• Plus with IPSec Encryption (56-bit and 168-bit

with 3DES)

• Firewall

• Plus Firewall

• Plus with Encryption and Firewall

The Plus feature sets contain an additional number of

value-added features such as legacy mainframe protocols,

DLSw, L2TP, L2F, Voice/Data integration, Asynchronous

Transfer Mode (ATM), VLANs, Netflow, etc. Additional

feature sets include IPSec, and 3DES encryption as well as

ICSA certified Firewall capabilities with intrusion

detection.

The Remote Access Services feature set includes various

management, multicast, security (excluding encryption),

protocoltranslation,remotenodeandterminalservicesand

some LAN and WAN service and optimization protocols

but excludes some of the above base feature set standards.

The Cisco 2600 also supports the Cisco IOS IP/H.323

Gatekeeper feature set providing the H.323 industry

standard gatekeeper functionality needed for scalable

multiservice networks. As a H.323 gatekeeper, the Cisco

2600 is dedicated to supporting video conferencing

call-setup, proxy, directory maintenance among other

responsibilities;it does notsupport multi-protocolrouting.

A more detailed list of features can be found in the

Cisco 2600 IOS release notes. The memory requirements

for a given feature set can be found in the Cisco 2600

software features and memory requirements product

bulletin. Note: Effective March 2000, all Cisco 2600

Series modular access routers ship with 32 MB of DRAM

memory and 8 MB of Flash memory as the default

conﬁguration. Some Cisco IOS feature sets require

additional memory.

Technical Specifications

The Cisco 2600 Series provides unparalleled ﬂexibility

andport density options for branchofﬁces. Thefollowing

table highlights a few of the Cisco 2600 conﬁguration

possibilities:

Table 7 Maximum Cisco 2600 Port Densities

Application Max. #

Supported

Simultaneous Voice Calls (digital/

analog) 60/4

T1/E1 Connections (including ATM) 8

Integrated Modems 16

ISDN PRI (B channels) 64

ISDN BRI 10

Asynchronous Serial 37

Synchronous Serial 12

DSL Connections 4

Copyright © 2001, Cisco Systems, Inc. All rights reserved. Cisco, Cisco IOS, Cisco Systems, and the Cisco Systems logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and

certain other countries.

All other trademarks mentioned in this document or Web site are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other

company. (0108R)

Printed in the USA 10/01 BW7654

Cisco Systems has more than 200 ofﬁces in the following countries and regions. Addresses, phone numbers, and fax numbers are listed on the

Cisco Web site at www.cisco.com/go/offices

Argentina • Australia • Austria • Belgium • Brazil • Bulgaria • Canada • Chile • China PRC • Colombia • Costa Rica • Croatia

Czech Republic • Denmark • Dubai, UAE • Finland • France • Germany • Greece • Hong Kong SAR • Hungary • India • Indonesia

Ireland • Israel • Italy • Japan • Korea • Luxembourg • Malaysia • Mexico • The Netherlands • New Zealand • Norway • Peru

Philippines • Poland • Portugal • Puerto Rico • Romania • Russia • Saudi Arabia • Scotland • Singapore • Slovakia • Slovenia • South Africa

Spain • Sweden • Switzerland • Taiwan • Thailand • Turkey • Ukraine • United Kingdom • United States • Venezuela • Vietnam • Zimbabwe

Corporate Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

www.cisco.com

Tel: 408 526-4000

800 553-NETS (6387)

Fax: 408 526-4100

European Headquarters

Cisco Systems Europe

11, Rue Camille Desmoulins

92782 Issy-les-Moulineaux

Cedex 9

France

www-europe.cisco.com

Tel: 33 1 58 04 60 00

Fax: 33 1 58 04 61 00

Americas Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

www.cisco.com

Tel: 408 526-7660

Fax: 408 527-0883

Asia Paciﬁc Headquarters

Cisco Systems Australia, Pty., Ltd

Level 9, 80 Paciﬁc Highway

P.O. Box 469

North Sydney

NSW 2060 Australia

www.cisco.com

Tel: +61 2 8448 7100

Fax: +61 2 9957 4350

• MainProcessor:80MHz RISC (Cisco 265x); 50 MHz

RISC (Cisco 262x); 40 MHz RISC (Cisco 261x)

• Flash Memory: 8 to 16MB (Cisco 261x); 8 to 32MB

(Cisco 262x1 and Cisco 265x only)

• System Memory (DRAM): 32 to 64MB (Cisco 261x

and Cisco 262x); 32 to 128MB (Cisco 265x only,

uses SDRAM)

• WAN Interface Card Slots: 2

• Network Module Slot: 1

• AIM Slot: 1

• Console/Aux Speed: 115.2 Kbps (maximum)

• Width: 17.5 in. (44.5 cm)

• Height: 1.69 in. (4.3 cm)

• Depth: 11.8 in. (30 cm)

• Weight (min): 8.85 lb (4.02 kg)

• Weight (max): 10.25 lb (4.66 kg)

• Power Dissipation: 72W (maximum)

• AC Input Voltage: 100 to 240 VAC

• Frequency: 47 to 64 Hz

• AC Input Current: 1.5 amps

• DC Input Voltage: -38V to -60V (UL label)

• DC Input Current: 2 amps

• Operating Temperature: 32 to 104 F (0 to 40 C)

• Non-operating Temperature: -13 to 158 F(-25 to 70 C)

• Relative Humidity: 5 to 95% non-condensing

• Noise Level (min): 38-dbA

• Noise Level (max): 42-dbA

The Cisco 2600 Series conforms to a number of safety,

EMI, immunity, and network homologation standards.

Details can be obtained through your Cisco reseller or

account manager.

Cisco Service and Support

Leading-edge technology deserves leading-edge support.

Service and support for the Cisco 2600 Series is available

on a one-time or annual contract basis. Support options

range from help desk assistance to proactive, onsite

consultation. All support contracts include:

• Major Cisco IOS software updates in protocol,

security, bandwidth, and feature improvements

• Full access rights to Cisco Connection Online for

technical assistance, electronic commerce, and

product information

• 24-hour-a-day access to the industry’s largest

dedicated technical support staff

A support contract maximizes the value of your

technology investment throughout its lifecycle, ensuring

optimum performance and availability. Augment your

internal staff’s capabilities by leveraging Cisco’s expertise.

Contact your local sales ofﬁce for further information.

1. Support for 32MB Flash requires Cisco IOS 12.1(3)T or later.

2600_ds 2613 Cisco 2600 Series Routers Datasheet

Navigation menu

Versions of this User Manual:

Views

Navigation