RACO Classic Catalog

User Manual: Classic

Open the PDF directly: View PDF .
Page Count: 51

CLASSIC Typical Details

™

RACO Interior OfficeFronts

ClassicClassic

CLASSIC Typical Details

™

RACO Interior OfficeFronts

Door Frame

Door Frame with Sidelight

CLASSIC Reference Drawings

See reference matrix pages for typical details information.

CLASSIC Typical Details

™

RACO Interior OfficeFronts

Door Frame with Partial Height Sidelight

Door Frame with Transom

1213

CLASSIC Reference Drawings

See reference matrix pages for typical details information.

21 20

CLASSIC Typical Details

™

RACO Interior OfficeFronts

Door Frame with Sidelight and Transom

Borrowed Light

14 12

CLASSIC Reference Drawings

See reference matrix pages for typical details information.

24 21

CLASSIC Typical Details

™

RACO Interior OfficeFronts

Partial Height Borrowed Light

Cased Opening

15,17

CLASSIC Reference Drawings

See reference matrix pages for typical details information.

24 21

CLASSIC Typical Details

™

RACO Interior OfficeFronts

CLASSIC Reference Drawings

See reference matrix pages for typical details information.

1/4" OR 3/8" GLASS

3/8" GASKET VR43862

1/4" GASKET VR40261

RC230

RC225

RC201

RC225

RC230

RC235

RC215

5 5/8"

4 31/32"

1/8"

RC230

RC225

RC411

RC225RC225

RC411

120 DEG

1/4" OR 3/8" GLASS

3/8" GASKET VR43862

1/4" GASKET VR40261

RC230

RC206

RC225

RC230

RC225

RC230

1/4" OR 3/8" GLASS

3/8" GASKET VR43862

1/4" GASKET VR40261

21/32"

4 31/32"

RC203

1/4" OR 3/8" GLASS

3/8" GASKET VR43862

1/4" GASKET VR40261

RC225RC225

RC230RC230

RC410

135 DEG

RC205

RC225RC225

RC230 RC230

1/4" OR 3/8" GLASS

3/8" GASKET VR438

1/4" GASKET VR402

RC411

120 DEG

Corners

26 27

28 29

30 31

.281

RC230

RC225

RC230

RC225

RC225 RC225

RC235

RC215

1/4" OR 3/8" GLASS

3/8" GASKET VR43862

1/4" GASKET VR40261

3 3/4"

5 5/8"

CLASSIC Typical Details

™

RACO Interior OfficeFronts

CLASSIC Reference Drawings

See reference matrix pages for typical details information.

1/4" OR 3/8" GLASS

3/8" GASKET VR43862

1/4" GASKET VR40261

RC230

RC204

135 DEG

RC226

RC230RC230

RC226RC225

RC230 RC230

RC248 RC248

RC206

RA404 RA404

1/4" OR 3/8" GLASS 3/8" GASKET VR43862

1/4" GASKET VR40261

RC202

1/4" OR 3/8" GLASS

3/8" GASKET VR43862

1/4" GASKET VR40261

RC225RC225

RC230RC230

RC409

150 DEG

MF401

RC248

RC208

1 1/2"

RC230

RC230 RC230

RC225

RC225 RC225

1/4" OR 3/8" GLASS

3/8" GASKET VR43862

1/4" GASKET VR40261

21/32"

5 5/8"

RC230

RC225

RC201

RC230

1/4" OR 3/8" GLASS

3/8" GASKET VR43862

1/4" GASKET VR40261

5 5/8"

4 31/32"

Corners

3736

CLASSIC Typical Details

™

RACO Interior OfficeFronts

CLASSIC Reference Drawings

See reference matrix pages for typical details information.

RC235

RC215

RC204

RC226

RC225

RC230

1/4" OR 3/8" GLASS

3/8" GASKET VR43862

1/4" GASKET VR40261

3 3/4"

RC204

RC235

RC215

RC226

RC225

RC226

RC230

1/4" OR 3/8" GLASS

3/8" GASKET VR43862

1/4" GASKET VR40261

RC205

RC411

RC230

RC226

RC230

RC215

RC235

RC225

RC226

1/4" OR 3/8" GLASS

3/8" GASKET VR43862

1/4" GASKET VR40261

4 31/32"

1/4" OR 3/8" GLASS

3/8" GASKET VR43862

1/4" GASKET VR40261

RC230

RC226

RC204

RC226

RC225

RC235

RC215 RC215

RC235

Corners

38 39

40 41

CLASSIC Typical Details

™

RACO Interior OfficeFronts

CLASSIC Reference Drawings

See reference matrix pages for typical details information.

VARIESRC407

RC401

1 1/2"

RC403

9/32"

RC348

RC344

NIC

RC344

RC346

MF401

(Wooden Beam not included)

1-5/8" thick

RACO ALTURA

Hollow Core Doors

are recommended.

Freestanding

Installation

Shown

MF431

MF401

RC415 RC209

RC209

Specialty Frames

RC401

RC407 RC403

RW425

VARIES 9/32"

1 1/2"

By-Passing Door

Pocket Door

Adjustable 20-min. Frame Adjustable 90-min. Frame

CLASSIC Typical Details

™

RACO Interior OfficeFronts

CLASSIC Reference Matrix

See reference elevation pages for typical details information.

C1-034

C1-018

C1-029

C1-017, C1-028

C1-019, C1-025

C1-022

C1-026, C1-027

C1-030

C1-020, C1-031

C1-035

C1-021

C1-021 SIM.

C1-023, C1-024

C1-009

C1-011

C1-012

C1-010

C1-013

C1-014

C1-033

C1-032

C1-001

C1-002

C1-003

C1-004

C1-005

C1-006

C1-007

C1-008

C1-015

C2-022, C2-024, C2-025

C2-033, C2-034

C2-056

C2-035, C2-057, C2-058

C2-040, C2-041, C2-043

C2-038, C2-044, C2-045,

C2-052, C2-055, C2-061

C2-036, C2-046

C2-048, C2-053, C2-054

C2-059

C2-028, C2-049, C2-051

C2-016

C2-039

C2-039 SIM.

C2-037

C2-018

C2-018 SIM., C2-016

C2-019

C2-017

C2-021

C2-027, C2-032, C2-047

C2-023, C2-026, C2-042

C2-029

C2-050

C2-002

C2-003

C2-001

C2-007

C2-015

C2-012

C2-006

C2-014

C2-030

C2-004

C2-005

C2-008

C2-009

C2-010

C2-011

C2-013

C2-031

C3-028, C3-029, C3-032

C3-042, C3-043

C3-057

C3-044, C3-058

C3-040, C3-041

C3-036, C3-049

C3-045

C3-055, C3-056

C3-031

C3-046, C3-059

C3-047

C3-050

C3-050 SIM.

C3-048

C3-025

C3-027

C3-035

C3-026

C3-030

C3-035

C3-033, C3-034

C3-037

C3-053

C3-002

C3-003

C3-001

C3-011

C3-014

C3-012

C3-010

C3-013, C3-020, C3-022

C3-039

C3-019

C3-004

C3-005

C3-023, C3-024, C3-038

C3-021, C3-051, C3-052

C3-006, C3-007, C3-008

C3-009, C3-018

C3-015, C3-016, C3-017

SERIES 225 SERIES 375 SERIES 487

Elevation Number

CLASSIC Typical Details

™

RACO Interior OfficeFronts

1/4" GASKET VR40261

3/8" GASKET VR43862

RC103

RC130 RC130

RC410

135 DEG.

RC125

2 13/16"

RC106

RC125

RC130

RC125

1/4" OR 3/8" GLASS

1/4" GASKET VR40261

3/8" GASKET VR43862

21/32"

3 15/32"

RC130

RC411RC411

RC125

RC130

RC411

120 DEG.

RC125

1/4" OR 3/8" GLASS

1/4" GASKET VR40261

3/8" GASKET VR43862

2 13/16"

RC105

RC411

120 DEG.

RC125RC125

1/4" GASKET VR40261

3/8" GASKET VR43862

RC130

2 13/16"

C1-001_225_2_way_corner_120_deg.dxf C1-002_225_2_way_corner_135_deg.dxf

C1-003_225_2_way_corner.dxf C1-004_225_3_way_corner_120_deg.dxf

CLASSIC Typical Details

™

RACO Interior OfficeFronts

1/4" OR 3/8" GLASS

RC125

RC130

1/4" GASKET VR40261

3/8" GASKET VR43862

RC130

RC125

4 1/8"

21/32"

RC125

RC101

RC135

1/4" OR 3/8" GLASS

RC130

1/4" GASKET VR40261

3/8" GASKET VR43862

RC125 RC125

RC130

RC115

4 1/8"

21/32"

1/8"

RC101

RC125

1/4" OR 3/8" GLASS

RC130 RC130

RC130

RC125 RC125

1/4" GASKET VR40261

3/8" GASKET VR43862

4 1/8"

21/32"

RC135

RC130

1/4" OR 3/8" GLASS

RC130

RC125

RW136

NIC

1/4" GASKET VR40261

3/8" GASKET VR40362

RC115

4 1/8"

21/32"

1/8"

2 1/4"

C1-007_225_3_way_corner.dxf C1-008_225_4_way_corner.dxf

C1-005_225_3_way_corner_2_way_glazing_and_hinge_jamb.dxf

C1-006_225_3_way_corner_2_way_glazing_and_strike_jamb.dxf

CLASSIC Typical Details

™

RACO Interior OfficeFronts

RC114

1 1/2"

9/32"

RC148

RC116

1 1/2"

RC148

9/32"

1 1/2"

2 1/4"

RC148

RA118

2 1/4"

9/32"

1 1/2"

RC148

RC130

1/4" OR 3/8" GLASS

1/4" GASKET VR40261

3/8" GASKET VR43862

1 1/2"

RC148

RC149

1 1/2"

C1-009_225_cased_jamb.dxf C1-010_225_cased_opening_header.dxf

C1-011_225_cased_sill_partial_height.dxf C1-012_225_closet_jamb.dxf

C1-013_225_door_head_at_head_track.dxf C1-014_225_head_track_glazing_insert.dxf

CLASSIC Typical Details

™

RACO Interior OfficeFronts

RC124

RC135

RW117

RC115

1/8"

1 1/2"

2 1/4"

RC135

RC130

1/4" OR 3/8" GLASS

SS112

RC112

1/4" GASKET VR40261

3/8" GASKET VR43862

1 1/2"

RC132

RC135

RC112

2 1/4"

9/32" 1 1/2"

RC124

RC130

1/4" OR 3/8" GLASS

1/4" GASKET VR40261

3/8" GASKET VR43862

1 1/2"

9/32"

2 1/4"

RC124

RC130RC130

1/4" OR 3/8" GLASS

1/4" GASKET VR40261

3/8" GASKET VR43862

1 1/2"

RC148

RC108

MF401

1 1/2"

C1-015_225_head_at_single_bifold_door.dxf C1-017_225_hinge_jamb_at_glass.dxf

See also C3-046

CLASSIC Typical Details

™

RACO Interior OfficeFronts

GUIDE

SPECIFICATION

Manufacturer:

Raco Interior Products, Inc.

2000 Silber Road

Houston, Texas 77055

713 682 6100 voice

800 272 7226 toll free voice

713 682 2079 fax

www.RacoInteriors.com

SECTION 08121

INTERIOR ALUMINUM DOORS, DOOR FRAMES, AND STOREFRONT FRAMING

(CLASSIC SYSTEM)

************************************************************************************************************************

This guide specification has been prepared by RACO Interior Products, Inc. in printed and electronic media, as an aid to

specifiers in preparing written construction documents for interior applications for aluminum door frames, sidelight framing,

storefront framing, and aluminum and glass doors.

Edit entire master to suit project requirements. Modify or add items as necessary. Delete items that are not applicable.

Words and sentences within brackets [_____] reflect a choice to be made regarding inclusion or exclusion of a particular item

or statement. This section may include performance, proprietary, and descriptive type specifications. Edit to avoid conflicting

requirements. Editor notes to guide the specifier are included between lines of asterisks to assist in choices to be made.

Remove these notes before final printing of specification.

This guide specification is written around the Construction Specifications Institute (CSI), Section Format standards references

to section names and numbers are based on MasterFormat 95.

For specification assistance on specific product applications, please contact our offices above or any of our local product

representatives throughout the country.

RACO reserves the right to modify these guide specifications at any time. Updates to this guide specification will be posted to

the manufacturer’s web site and/or in printed matter as they occur. RACO makes no expressed or implied warranties

regarding content, errors, or omissions in the information presented.

************************************************************************************************************************

PART 1 GENERAL

1.1 SUMMARY

A. Related Documents:

1. Provisions established within the General and Supplementary Conditions of the Contract, Division 1 _

General Requirements, and the Drawings are collectively applicable to this Section.

*************************************************************************************************************************

Edit the "Section Includes" paragraph to briefly describe the content of the section. After editing section, refer back to this

paragraph to verify no conflicts occur.

************************************************************************************************************************

CLASSIC Guide Specifications

CLASSIC Typical Details

™

RACO Interior OfficeFronts

CLASSIC Guide Specifications

B. Section Includes:

1. Aluminum door frames for interior use.

2. [Aluminum door frames with sidelight frame components for interior use.]

3. [Aluminum OfficeFronts framing system for interior use.]

4. [Aluminum and glass doors for interior use.]

C. Related Sections:

1. [Section 08210 - Wood Doors.]

2. [Section 08220 - Plastic Doors.]

3. [Section 08710 - Door Hardware.]

4. [Section 08800 - Glazing.]

1.2 SUBMITTALS

************************************************************************************************************************

Include submittal requirements below which are consistent with the scope of the project and extent of work of this section.

Only request submittals which are necessary for review of design intent.

Do not request submittals if drawings sufficiently describe the products of this section or if proprietary specifying techniques

are used. The review of submittals increases the possibility of unintended variations to drawings.

************************************************************************************************************************

A. Submit under provisions of Section 01300.

B. Product Data: Submit for door, sidelight and OfficeFronts frames.

1. Include information for factory finish, glazing gaskets, accessories and other required

components.

2. Include color charts for finish indicating manufacturer's standard colors available for selection.

C. Shop Drawings: Submit schedule indicating opening identification number, frame types, dimensions,

swing, label, and hardware requirements. Use same reference numbers for openings as Contract

Drawings.

D. Include elevations and details indicating frame types, profiles, conditions at openings, methods and

locations of anchoring, glazing requirements, hardware locations, and reinforcements for hardware,

details of connections to special construction and other custom features.

E. Samples: Submit following:

1. Samples indicating quality of finish in selected colors on alloys used for Work.

2. Where normal color and texture variations are expected, include additional samples to show

range of such variation.

F. Informational Submittals: Submit manufacturer's instructions.

1.4 QUALITY ASSURANCE

************************************************************************************************************************

Include quality assurance requirements below that are consistent with the size and scope of the project and extent of work of

this section. Only request qualification statements you intend to review, and which are necessary to establish qualifications of

the product, manufacturer, or installer.

************************************************************************************************************************

A. Single Source Responsibility: Provide aluminum frames, aluminum and glass doors, and

accessories produced by a single manufacturer for each type of product indicated.

B. Manufacturer’s Qualifications: Manufacturer shall demonstrate previous experience in manufacturing

of interior aluminum door and OfficeFronts framing for a period of not less than 10 years on

comparable sized project.

C. [Fire and Smoke Rated Assemblies:

1. Where fire-rated openings are scheduled or required by authorities having jurisdiction, provide

fire-rated aluminum frames that have been tested and certified to meet the requirements of

UBC 7.2 Positive Pressure Test for specified exposure by an agency acceptable to governing

authorities.

2. Provide labels permanently fastened on each fire rated frame and door that are within size

limits established by NFPA and the testing authority.]

CLASSIC Typical Details

™

RACO Interior OfficeFronts

CLASSIC Guide Specifications

1.5 DELIVERY, STORAGE, AND HANDLING

A. Deliver frames and doors in cartons to provide protection during transit and storage at project site.

B. Inspect frames and doors upon delivery for damage.

1. Repair minor damage to pre-finished products by means as recommended by manufacturer

2. Replace frames and doors that cannot be satisfactorily repaired.

C. Store frames and doors at project site under cover and as near as possible to final installation

location. Do not use covering material that will cause discoloration of aluminum finish.

1.6 ENVIRONMENTAL REQUIREMENTS

A. Do not begin installation of frames or doors until area of work has been completely enclosed and

interior is protected from the elements.

B. Maintain temperature and humidity in areas of installation within reasonable limits, as close as

possible to final occupancy. If necessary, provide temperature control and ventilation to maintain

required environmental conditions.

1.7 WARRANTY

A. Warrant against defects in manufacturing of materials for a period of 2 years from date of substantial

completion.

B. Warrant framing finish against defects, including cracking, flaking, blistering, peeling, and excessive

fading, chalking and non-uniformity in color for a period of 5 years.

C. [Warrant aluminum and glass doors for life of door against corner construction failure, causing

wracking of door beyond acceptable tolerances.]

PART 2 PRODUCTS

2.1 ACCEPTABLE MANUFACTURERS AND PRODUCTS

A. Manufacturers:

1. Meet of exceed standards of manufacture, appearance, performance, function, and design, of

RACO Interior OfficeFronts by RACO Interior Products, Inc.

2. Substitutions: Comply with provisions of Section 01600.

B. Acceptable Products:

************************************************************************************************************************

Select from product list below for particular project needs.

Include item 1 below if only doorframes are required. Delete items a, b, and c if fire rated doors are not required. First

item 1 is for a full height (to ceiling) framing system. Second item 1 if for system less than ceiling height.

Include item 2 below if sidelights and storefront framing is required

Include item 3 below if aluminum and glass swinging doors are required

Include item 4 below if sliding aluminum and glass doors are required.

************************************************************************************************************************

1. [Interior Door Frames: RACO Classic Prestige fixed throat frames to accommodate wall

thicknesses indicated on Drawings; ceiling height system.]

1. [Interior Door Frames: RACO Classic Freestanding [fixed] [adjustable] throat frames to

accommodate wall thicknesses indicated on Drawings; height of system as indicated on

Drawings.

a. [Provide fire rated frames to [20] [90] minute rating complying with UL 10B, ASTM

E152, and NFPA 252.]]

2. [Interior Borrowed Light and OfficeFronts Framing: RACO Classic [Prestige] [Free Standing],

fixed throat frames to accommodate wall thicknesses indicated on Drawings; [ceiling height]

[____] height system]

3. [Swinging Aluminum and Glass Doors: RACO Series 550, wide stile doors , having [square]

[beveled] glazing stops, and EPDM glazing gaskets, [and having ADA compliant bottom rail].

CLASSIC Typical Details

™

RACO Interior OfficeFronts

CLASSIC Guide Specifications

************************************************************************************************************************

Select item a. below for non-fire rated doors and item b. for fire rated doors. In item c., custom mullion configurations can be

specified and should be indicated on the Drawings as to type and locations. Hardware for swinging doors can be specified in

e. below, or this section can be reference to Section 08710 for all hardware requirements.

************************************************************************************************************************

a. [Provide non-fire rated with adjustable bottom rails for field adjustment.]

b. [Provide with 20 minute (without hose stream test) fire rated label, factory glazed with

approved clear (wireless) or approved wire glass.

c. [Provide with custom horizontal and vertical mullion pattern as indicated on Drawings]

d. [Provide complete with the following hardware in [________] finish:

(1) [1-1/2] [2] pair of 4-1/2 x 4-1/2 inch [standard] [ball bearing] butts.

(2) Exposed overhead closer, [standard] [slim line] profile.

(3) [Latch] [Lock] set to match other devices in project.

(4) Flush bolts for inactive leaf of pairs of doors.

(5) Balance of hardware as indicated in Section 08710.]

4. [Sliding Aluminum and Glass Doors: Series 2000, Sliding Doors, complete with 2-1/16 inch stiles,

2-1/8 inch top rail, and 3-3/16 inch bottom rail.]

2.2 MATERIALS

A. Aluminum: Meeting requirements of ASTM B221, 6063T5 alloy, and as otherwise required to assure

compliance with dimensional tolerances and maintain color uniformity. Billets shall be composed of

at least 33% recycled aluminum.

B. Anchorage Devices, Clips and Fasteners: Manufacturer's standard type, compatible with materials

being secured.

C. Accessories: As necessary for complete system.

2.3 EXTRUDED ALUMINUM FRAME AND DOOR FABRICATION

A. Assemble all sidelights and windows with the use of clips.

B. Do not exceed maximum size of window or door to meet applicable code requirements.

C. Factory pre-machine door frame jambs [and doors] and prepare for hardware, with concealed

reinforcement plates, drilled and tapped as required, and fastened within frame with concealed

screws.

2.4 FINISHES

A. Factory finish extruded frame and door components so that all parts exposed to view upon completion of

installation are uniform in finish and color. Exposed surfaces shall be free of scratches and other serious

blemishes.

B. [Factory Applied Paint Finish: Comply with AAMA(2603)603.8 and AA-DAF-45, factory applied

backed enamel coating.

1. Color: [As selected from manufacturer’s standard colors] [Custom color to match Architect’s

sample].]

C. Clear Anodized: AA-M12C22A21, etched, medium matte, clear anodic coating.

D. [Clean all aluminum surfaces of contaminants and leave ready for field painting per Section 09900.]

PART 3 EXECUTION

3.1 EXAMINATION

A. Examine project conditions and verify that project is ready for work of this section to proceed. Do not

proceed with installation until unsatisfactory conditions have been corrected.

B. Verify wall thickness does not exceed manufacturer’s recommended tolerances of specified throat

size.

CLASSIC Typical Details

™

RACO Interior OfficeFronts

3.2 INSTALLATION

A. Comply with frame and door manufacturer's printed installation instructions and approved shop

drawings. Do not attempt installation in areas where wall thickness exceeds tolerances of specified

throat size.

B. Install frames plumb and square, free from warp or twist, securely anchored to substrates with

fasteners recommended by frame manufacturer. Maintain dimensional tolerances and alignment

with adjacent work. Ensure joints are hairline tight and surfaces flush with adjacent components.

C. Set all doors in correct locations as shown on the drawings, level, square, plumb and in alignment

with other work in accordance with the manufacturer's installation instructions and approved shop

drawings.

D. [Install glass in accordance with Section 08800.]

3.3 ADJUSTING AND CLEANING

A. Protect exposed portions of aluminum surfaces from damage by plaster, lime, acid, cement, and

other contaminants.

B. Touch up marred areas so that touch-up is not visible from a distance of 4 feet. Remove and replace

frames that cannot be satisfactorily adjusted.

3.4 PROTECTION

A. Protect as required to assure that frames and doors will be without damage until Substantial

Completion.

END OF SECTION

CLASSIC Guide Specifications

RACO Classic Catalog

Navigation menu

Versions of this User Manual:

Views

Navigation