VMware VCenter Converter Standalone User's Guide VCenter 6.2 Convsa 62
User Manual:
Open the PDF directly: View PDF
Page Count: 104 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- VMware vCenter Converter Standalone User's Guide
- Contents
- VMware vCenter Converter Standalone Documentation
- Introduction to VMware vCenter Converter Standalone
- Migration with Converter Standalone
- Converter Standalone Components
- Cloning and System Configuration of Physical and Powered On Virtual Machines
- Types of Data Cloning Operations
- Using Converter Standalone with Virtual Machine Sources
- System Settings Affected by Conversion
- Changes to Virtual Hardware After Virtual Machine Migration
- System Requirements
- Supported Operating Systems
- Supported Firmware Interfaces
- Supported Source Types
- Supported Destination Types
- Supported Source Disk Types
- Supported Destination Disk Types
- Support for IPv6 in Converter Standalone
- Screen Resolution Requirements
- Configuring Permissions for vCenter Server Users
- TCP/IP and UDP Port Requirements for Conversion
- Requirements for Remote Hot Cloning of Windows Operating Systems
- Conversion Limitations
- Installing and Uninstalling Converter Standalone
- Perform a Local Installation on Windows
- Perform a Client-Server Installation in Windows
- Perform a Command-Line Installation in Windows
- Command-Line Options for Windows Installation
- Modify Converter Standalone in Windows
- Repair Converter Standalone in Windows
- Uninstall Converter Standalone in Windows
- Connect to a Remote Converter Standalone Server
- Enable TLS 1.0 Protocol in vCenter Converter Standalone
- Configuring the Customer Experience Improvement Program
- Convert a Physical or Virtual Machine
- Start the Wizard for a Conversion
- Select a Source Machine to Convert
- Prerequisites for Converting a Powered On Windows Machine
- Select a Powered On Windows Machine to Convert
- Select a Powered On Linux Machine to Convert
- Select an ESXi or vCenter Server Virtual Machine to Convert
- Select a VMware Hosted Virtual Machine to Convert
- Select a Hyper-V Server Virtual Machine to Convert
- Convert an Amazon EC2 Windows Instance to a VMware Virtual Machine
- Select a Destination for the New Virtual Machine
- Configure the Hardware of the Destination Virtual Machine
- Organize the Data to Be Copied on the Destination Machine
- Resize a Volume
- Change a Volume Cluster Size
- Exclude a Source Volume from the Conversion Process
- Move a Volume to a Different Virtual Disk
- Select the Destination Datastore for a Source Volume
- Add a Virtual Disk
- Set Up a Virtual Disk as a Logical-Volume Group Container
- Move a Disk to a Different Datastore
- Create an Expandable Disk on a Managed Destination
- Create an Expandable Disk on a Hosted Destination
- Exclude a Source Disk from the Conversion Process
- Copy All Disks to the Destination
- Create an Optimized Partition Layout
- Create a Linked Clone
- Edit the Number of Processor Sockets and Cores
- Allocate Memory for the Destination Virtual Machine
- Select a Disk Controller for the Destination Virtual Machine
- Configure the Network Settings of the Destination Virtual Machine
- Configure the Network for the Helper Virtual Machine
- Organize the Data to Be Copied on the Destination Machine
- Configure the Software on the Destination Virtual Machine
- Configure the Conversion Job
- Set the Startup Mode for Destination Services
- Stop Services Running on the Source Machine
- Synchronize the Destination Machine with Changes Made to the Source Machine
- Power Off the Source Machine After Conversion
- Power On the Destination Virtual Machine After Conversion
- Limit the Amount of Resources Used by the Conversion Job
- Uninstall Converter Standalone Agent from the Source Machine
- Review the Summary and Submit the Conversion Job
- Configure Virtual Machines
- Start the Configuration Wizard
- Select a Source Machine to Configure
- Select the Options to Configure
- Review and Submit the Configuration Job
- Manage Conversion and Configuration Jobs and Tasks