Intel® Core™ And Pentium® Desktop Processor Series 6000 Core I5 600 I3 500 Pentium Spec Update
User Manual: 6000
Open the PDF directly: View PDF 
.
Page Count: 58
| Download | |
| Open PDF In Browser | View PDF |
Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update September 2015 Document Number: 322911-023US INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. A “Mission Critical Application” is any application in which failure of the Intel Product could result, directly or indirectly, in personal injury or death. SHOULD YOU PURCHASE OR USE INTEL'S PRODUCTS FOR ANY SUCH MISSION CRITICAL APPLICATION, YOU SHALL INDEMNIFY AND HOLD INTEL AND ITS SUBSIDIARIES, SUBCONTRACTORS AND AFFILIATES, AND THE DIRECTORS, OFFICERS, AND EMPLOYEES OF EACH, HARMLESS AGAINST ALL CLAIMS COSTS, DAMAGES, AND EXPENSES AND REASONABLE ATTORNEYS' FEES ARISING OUT OF, DIRECTLY OR INDIRECTLY, ANY CLAIM OF PRODUCT LIABILITY, PERSONAL INJURY, OR DEATH ARISING IN ANY WAY OUT OF SUCH MISSION CRITICAL APPLICATION, WHETHER OR NOT INTEL OR ITS SUBCONTRACTOR WAS NEGLIGENT IN THE DESIGN, MANUFACTURE, OR WARNING OF THE INTEL PRODUCT OR ANY OF ITS PARTS. Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined”. Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The information here is subject to change without notice. Do not finalize a design with this information. Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order. Copies of documents which have an order number and are referenced in this document, or other Intel literature, may be obtained by calling 1-800548-4725, or go to: http://www.intel.com/design/literature.htm. Code names featured are used internally within Intel to identify products that are in development and not yet publicly announced for release. Customers, licensees and other third parties are not authorized by Intel to use code names in advertising, promotion or marketing of any product or services and any such use of Intel's internal code names is at the sole risk of the user. Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. Intel processor numbers are not a measure of performaSeptember 2015nce. Processor numbers differentiate features within each processor family, not across different processor families. Go to: http://www.intel.com/products/processor_number. Intel® Active Management Technology requires activation and a system with a corporate network connection, an Intel® AMT-enabled chipset, network hardware and software. For notebooks, Intel AMT may be unavailable or limited over a host OS-based VPN, when connecting wirelessly, on battery power, sleeping, hibernating or powered off. Results dependent upon hardware, setup & configuration. For more information, visit http:// www.intel.com/technology/platform-technology/intel-amt. Intel® Turbo Boost Technology requires a system with Intel® Turbo Boost Technology. Intel Turbo Boost Technology and Intel Turbo Boost Technology 2.0 are only available on select Intel® processors. Consult your PC manufacturer. Performance varies depending on hardware, software, and system configuration. For more information, visit: http://www.intel.com/go/turbo. No computer system can provide absolute security under all conditions. Intel® Trusted Execution Technology (Intel® TXT) requires a computer system with Intel® Virtualization Technology, an Intel TXT-enabled processor, chipset, BIOS, Authenticated Code Modules and an Intel TXTcompatible measured launched environment (MLE). Intel TXT also requires the system to contain a TPM v1.s. For more information, visit http:// www.intel.com/technology/security. Intel® Hyper-Threading Technology requires an Intel® HT Technology enabled system, check with your PC manufacturer. Performance will vary depending on the specific hardware and software used. Not available on Intel® Core™ i5-750. For more information including details on which processors support HT Technology, visit http://www.intel.com/info/hyperthreading. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and other countries. *Other names and brands may be claimed as the property of others. ©2015 Intel Corporation Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 2 September 2015 Document Number: 322911-023US Contents Revision History ...............................................................................................................5 Preface ..............................................................................................................................7 Summary Tables of Changes ..........................................................................................9 Identification Information ..............................................................................................15 Errata ...............................................................................................................................18 Specification Changes...................................................................................................54 Specification Clarifications ...........................................................................................55 Documentation Changes ...............................................................................................56 September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 3 §§ Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 4 September 2015 Document Number: 322911-023US Revision History Revision Description Date 001 Initial Release January 2010 002 Added Errata AAU85-AAU87. Corrected Extended Model and Model Number register values in Component Identification table. February 2010 003 Added Errata AAU88-AAU91. Added Documentation Changes AAU1-AAU3. March 2010 004 Added Errataum AAU92. April 2010 ® 005 Updated Processor Identification table to include the SKU information for the Intel i5-680 processor. Added processor K-0 stepping information. Core™ April 2010 006 Added Errata AAU93 - AAU97 April 2010 007 Updated Processor Identification table to include the SKU information for the Intel® Core™ i5-655K and i3-550 processor. June 2010 008 Added Errata AAU98-AAU102 July 2010 009 Erratum AAU32 added to this product Specification Update in error, all erratum details removed from the specification update document. August 2010 010 Updated Processor Identification table to include the SKU information for the Intel® Core™ i3-560 processor. August 2010 011 Added Errata AAU103-AAU105 September 2010 012 Added Errata AAU106 - AAU108 Updated problem statement for erratum AAU36 November 2010 Changed document title to reflect introduction of G6960 processor 013 Added Errata AAU109-AAU110 Erratum AAU98 added to this specification Update in error; all erratum details removed from the specification update document. January 2011 014 Added Erratum AAU111 November 2011 015 Added Erratum AAU112 May 2013 016 Added Errata AAU113-AAU115 June 2013 017 Added Errata AAU116 August 2013 018 019 020 021 • No errata updates added November 2013 • Document standardization • No errata updates added December 2013 • Document standardization • Updated link to access Intel® 64 and IA-32 Architecture Software Developer's Manual Documentation Changes • Removed Erratum AAU70 • Updated Erratum AAU42 July 2014 November 2014 022 • Updated Erratum AAU112 February 2015 023 • Added Erratum AAU117 September 2015 September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 5 §§ Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 6 September 2015 Document Number: 322911-023US Preface This document is an update to the specifications contained in the Affected Documents table below. This document is a compilation of device and documentation errata, specification clarifications and changes. It is intended for hardware system manufacturers and software developers of applications, operating systems, or tools. Information types defined in Nomenclature are consolidated into the specification update and are no longer published in other documents. This document may also contain information that was not previously published. Affected Documents Document Number Document Title Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium® Desktop Processor 6000 Series Datasheet, Volume 1 ® ® Intel Core™ i5-600, i3-500 Desktop Processor Series and Intel G6950 Datasheet, Volume 2 Pentium ® Processor 322909-006 322910-002 Related Documents Document Number/ Location Document Title AP-485, Intel® Processor Identification and the CPUID Instruction http://www.intel.com/ design/processor/ applnots/241618.htm Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 1: Basic Architecture Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 2A: Instruction Set Reference Manual A-M Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 2B: Instruction Set Reference Manual N-Z Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 3A: System Programming Guide Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 3B: System Programming Guide http://www.intel.com/ content/www/us/en/ processors/architectures-softwaredeveloper-manuals.html Intel® 64 and IA-32 Intel Architecture Optimization Reference Manual Intel® 64 and IA-32 Architectures Software Developer’s Manual Documentation Changes ACPI Specifications September 2015 Document Number: 322911-023US http:// download.intel.com/ products/processor/ manual/252046.pdf www.acpi.info Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 7 Nomenclature Errata are design defects or errors. These may cause the processor behavior to deviate from published specifications. Hardware and software designed to be used with any given stepping must assume that all errata documented for that stepping are present on all devices. S-Spec Number is a five-digit code used to identify products. Products are differentiated by their unique characteristics such as, core speed, L2 cache size, package type, etc. as described in the processor identification information table. Read all notes associated with each S-Spec number. Specification Changes are modifications to the current published specifications. These changes will be incorporated in any new release of the specification. Specification Clarifications describe a specification in greater detail or further highlight a specification’s impact to a complex design situation. These clarifications will be incorporated in any new release of the specification. Documentation Changes include typos, errors, or omissions from the current published specifications. These will be incorporated in any new release of the specification. Note: Errata remain in the specification update throughout the product’s lifecycle, or until a particular stepping is no longer commercially available. Under these circumstances, errata removed from the specification update are archived and available upon request. Specification changes, specification clarifications and documentation changes are removed from the specification update when the appropriate changes are made to the appropriate product specification or user documentation (datasheets, manuals, etc.). Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 8 September 2015 Document Number: 322911-023US Summary Tables of Changes The following tables indicate the errata, specification changes, specification clarifications, or documentation changes which apply to the processor. Intel may fix some of the errata in a future stepping of the component, and account for the other outstanding issues through documentation or specification changes as noted. These tables uses the following notations: Codes Used in Summary Tables Stepping X: Errata exists in the stepping indicated. Specification Change or Clarification that applies to this stepping. (No mark) or (Blank box): This erratum is fixed in listed stepping or specification change does not apply to listed stepping. (Page): Page location of item in this document. Doc: Document change or update will be implemented. Plan Fix: This erratum may be fixed in a future stepping of the product. Fixed: This erratum has been previously fixed. No Fix: There are no plans to fix this erratum. Page Status Row Change bar to left of a table row indicates this erratum is either new or modified from the previous version of the document. September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 9 Errata (Sheet 1 of 5) Steppings Number Status ERRATA C-2 K-0 AAU1 X X No Fix The Processor May Report a #TS Instead of a #GP Fault AAU2 X X No Fix REP MOVS/STOS Executing with Fast Strings Enabled and Crossing Page Boundaries with Inconsistent Memory Types may use an Incorrect Data Size or Lead to Memory-Ordering Violations AAU3 X X No Fix Code Segment Limit/Canonical Faults on RSM May Be Serviced before Higher Priority Interrupts/Exceptions and May Push the Wrong Address onto the Stack AAU4 X X No Fix Performance Monitor SSE Retired Instructions May Return Incorrect Values AAU5 X X No Fix Premature Execution of a Load Operation Prior to Exception Handler Invocation AAU6 X X No Fix MOV To/From Debug Registers Causes Debug Exception AAU7 X X No Fix Incorrect Address Computed for Last Byte of FXSAVE/FXRSTOR Image Leads to Partial Memory Update AAU8 X X No Fix Values for LBR/BTS/BTM Will Be Incorrect after an Exit from SMM AAU9 X X No Fix Single Step Interrupts with Floating Point Exception Pending May Be Mishandled AAU10 X X No Fix Fault on ENTER Instruction May Result in Unexpected Values on Stack Frame AAU11 X X No Fix IRET under Certain Conditions May Cause an Unexpected Alignment Check Exception AAU12 X X No Fix General Protection Fault (#GP) for Instructions Greater than 15 Bytes May be Preempted AAU13 X X No Fix General Protection (#GP) Fault May Not Be Signaled on Data Segment Limit Violation above 4-G Limit AAU14 X X No Fix LBR, BTS, BTM May Report a Wrong Address when an Exception/Interrupt Occurs in 64-bit Mode AAU15 X X No Fix MCi_Status Overflow Bit May Be Incorrectly Set on a Single Instance of a DTLB Error AAU16 X X No Fix Debug Exception Flags DR6.B0-B3 Flags May be Incorrect for Disabled Breakpoints AAU17 X X No Fix MONITOR or CLFLUSH on the Local XAPIC's Address Space Results in Hang AAU18 X X No Fix Corruption of CS Segment Register During RSM While Transitioning From Real Mode to Protected Mode AAU19 X X No Fix Performance Monitoring Events for Read Miss to Level 3 Cache Fill Occupancy Counter may be Incorrect AAU20 X X No Fix A VM Exit on MWAIT May Incorrectly Report the Monitoring Hardware as Armed AAU21 X X No Fix Performance Monitor Event SEGMENT_REG_LOADS Counts Inaccurately AAU22 X X No Fix #GP on Segment Selector Descriptor that Straddles Canonical Boundary May Not Provide Correct Exception Error Code AAU23 X X No Fix Improper Parity Error Signaled in the IQ Following Reset When a Code Breakpoint is Set on a #GP Instruction AAU24 X X No Fix An Enabled Debug Breakpoint or Single Step Trap May Be Taken after MOV SS/ POP SS Instruction if it is Followed by an Instruction That Signals a Floating Point Exception AAU25 X X No Fix IA32_MPERF Counter Stops Counting During On-Demand TM1 Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 10 September 2015 Document Number: 322911-023US Errata (Sheet 2 of 5) Steppings Number Status ERRATA C-2 K-0 AAU26 X X No Fix Synchronous Reset of IA32_APERF/IA32_MPERF Counters on Overflow Does Not Work AAU27 X X No Fix Disabling Thermal Monitor While Processor is Hot, Then Re-enabling, May Result in Stuck Core Operating Ratio AAU28 X X No Fix Writing the Local Vector Table (LVT) when an Interrupt is Pending May Cause an Unexpected Interrupt AAU29 X X No Fix xAPIC Timer May Decrement Too Quickly Following an Automatic Reload While in Periodic Mode AAU30 X X No Fix Reported Memory Type May Not Be Used to Access the VMCS and Referenced Data Structures AAU31 X X No Fix Changing the Memory Type for an In-Use Page Translation May Lead to Memory-Ordering Violations AAU32 X X No Fix Erratum AAU32 added to this specification Update in error; all erratum details removed from the specification update document. AAU33 X Fixed Delivery of Certain Events Immediately Following a VM Exit May Push a Corrupted RIP onto the Stack AAU34 X X No Fix Infinite Stream of Interrupts May Occur if an ExtINT Delivery Mode Interrupt is Received while All Cores in C6 AAU35 X X No Fix Two xAPIC Timer Event Interrupts May Unexpectedly Occur AAU36 X X No Fix EOI Transaction May Not be Sent if Software Enters Core C6 During an Interrupt Service Routine AAU37 X X No Fix FREEZE_WHILE_SMM Does Not Prevent Event From Pending PEBS During SMM AAU38 X X No Fix APIC Error “Received Illegal Vector” May be Lost AAU39 X X No Fix DR6 May Contain Incorrect Information When the First Instruction After a MOV SS,r/m or POP SS is a Store AAU40 X X No Fix An Uncorrectable Error Logged in IA32_CR_MC2_STATUS May Also Result in a System Hang AAU41 X X No Fix IA32_PERF_GLOBAL_CTRL MSR May Be Incorrectly Initialized AAU42 X X No Fix Performance Monitor Counter MEM_INST_RETIRED.STORES May Count Higher than Expected AAU43 X X No Fix Sleeping Cores May Not be Woken Up on Logical Cluster Mode Broadcast IPI Using Destination Field Instead of Shorthand AAU44 X X No Fix Faulting Executions of FXRSTOR May Update State Inconsistently AAU45 X X No Fix Performance Monitor Event EPT.EPDPE_MISS May be Counted While EPT is Disable AAU46 X X No Fix Memory Aliasing of Code Pages May Cause Unpredictable System Behavior AAU47 X X No Fix Performance Monitor Counters May Count Incorrectly AAU48 X X No Fix Performance Monitor Event Offcore_response_0 (B7H) Does Not Count NT Stores to Local DRAM Correctly AAU49 X X No Fix EFLAGS Discrepancy on Page Faults and on EPT-Induced VM Exits after a Translation Change AAU50 X X No Fix Back to Back Uncorrected Machine Check Errors May Overwrite IA32_MC3_STATUS.MSCOD September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 11 Errata (Sheet 3 of 5) Steppings Number Status ERRATA C-2 K-0 AAU51 X X No Fix Corrected Errors With a Yellow Error Indication May be Overwritten by Other Corrected Errors AAU52 X X No Fix Performance Monitor Events DCACHE_CACHE_LD and DCACHE_CACHE_ST May Overcount AAU53 X X No Fix Rapid Core C3/C6 Transitions May Cause Unpredictable System Behavior AAU54 X X No Fix APIC Timer CCR May Report 0 in Periodic Mode AAU55 X X No Fix Performance Monitor Events INSTR_RETIRED and MEM_INST_RETIRED May Count Inaccurately AAU56 X X No Fix A Page Fault May Not be Generated When the PS bit is set to "1" in a PML4E or PDPTE AAU57 X X No Fix BIST Results May be Additionally Reported After a GETSEC[WAKEUP] or INITSIPI Sequence AAU58 X X No Fix Pending x87 FPU Exceptions (#MF) May be Signaled Earlier Than Expected AAU59 X X No Fix VM Exits Due to "NMI-Window Exiting" May Be Delayed by One Instruction AAU60 X X No Fix The Memory Controller tTHROT_OPREF Timings May be Violated During Self Refresh Entry AAU61 X X No Fix VM Exits Due to EPT Violations Do Not Record Information About Pre-IRET NMI Blocking AAU62 X X No Fix Multiple Performance Monitor Interrupts are Possible on Overflow of IA32_FIXED_CTR2 AAU63 X X No Fix LBRs May Not be Initialized During Power-On Reset of the Processor AAU64 X X No Fix LBR, BTM or BTS Records May have Incorrect Branch From Information After an EIST Transition, T-states, C1E, or Adaptive Thermal Throttling AAU65 X X No Fix VMX-Preemption Timer Does Not Count Down at the Rate Specified AAU66 X X No Fix Multiple Performance Monitor Interrupts are Possible on Overflow of Fixed Counter 0 AAU67 X X No Fix VM Exits Due to LIDT/LGDT/SIDT/SGDT Do Not Report Correct Operand Size AAU68 X X No Fix Performance Monitoring Events STORE_BLOCKS.NOT_STA and STORE_BLOCKS.STA May Not Count Events Correctly AAU69 X X No Fix Storage of PEBS Record Delayed Following Execution of MOV SS or STI AAU70 X X No FixAAU71 X X No Fix INVLPG Following INVEPT or INVVPID May Fail to Flush All Translations for a Large Page AAU72 X X No Fix Logical Processor May Use Incorrect VPID after VM Entry That Returns From SMM AAU73 X X No Fix The Memory Controller May Hang Due to Uncorrectable ECC Errors or Parity Errors Occurring on Both Channels in Mirror Channel Mode AAU74 X X No Fix MSR_TURBO_RATIO_LIMIT MSR May Return Intel® Turbo Boost Technology Core Ratio Multipliers for Non-Existent Core Configurations AAU75 X Fixed Internal Parity Error May Be Incorrectly Signaled during C6 Exit AAU76 X X No Fix PMIs during Core C6 Transitions May Cause the System to Hang AAU77 X X No Fix 2MB Page Split Lock Accesses Combined With Complex Internal Events May Cause Unpredictable System Behavior Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 12 September 2015 Document Number: 322911-023US Errata (Sheet 4 of 5) Steppings Number Status ERRATA No Fix If the APIC timer Divide Configuration Register (Offset 03E0H) is written at the same time that the APIC timer Current Count Register (Offset 0390H) reads 1H, it is possible that the APIC timer will deliver two interrupts. X Fixed TXT.PUBLIC.KEY is Not Reliable AAU80 X Fixed 8259 Virtual Wire B Mode Interrupt May Be Dropped When it Collides With Interrupt Acknowledge Cycle From the Preceding Interrupt AAU82 X X No Fix The APIC Timer Current Count Register May Prematurely Read 0x0 While the Timer is Still Running AAU83 X X No Fix Secondary PCIe Port May Not Train After A Warm Reset AAU84 X X No Fix The PECI Bus May Be Tri-stated after System Reset AAU85 X X No Fix The Combination of a Page-Split Lock Access And Data Accesses That Are Split Across Cacheline Boundaries May Lead to Processor Livelock AAU86 X X No Fix Processor Hangs on Package C6 State Exit AAU87 X X No Fix A Synchronous SMI May be Delayed AAU88 X X No Fix FP Data Operand Pointer May Be Incorrectly Calculated After an FP Access Which Wraps a 4-Gbyte Boundary in Code That Uses 32-Bit Address Size in 64bit Mode AAU89 X X Plan Fix AAU90 X X No Fix PCI Express Cards May Not Train to x16 Link Width AAU91 X X No Fix Unexpected Graphics VID Transition During Warm Reset May Cause the System to Hang AAU92 X X No Fix IO_SMI Indication in SMRAM State Save Area May Be Lost AAU93 X Fixed VM Entry to 64-Bit Mode May Fail if Bits 48 And 47 of Guest RIP Are Different AAU94 X Fixed VM Entry Loading an Unusable SS Might Not Set SS.B to 1 AAU95 X Fixed FSW May Be Corrupted If an x87 Store Instruction Causes a Page Fault in VMX Non-Root Operation AAU96 X X No Fix Under Certain Low Temperature Conditions, Some Uncore Performance Monitoring Events May Report Incorrect Results AAU97 X X No Fix CKE May go Low Within tRFC(min) After a PD Exit AAU98 X X No Fix Erratum AAU98 added to this specification Update in error; all erratum details removed from the specification update document. AAU99 X X No Fix Performance Monitor Events for Hardware Prefetches Which Miss The L1 Data Cache May be Over-Counted AAU100 X X No Fix VM Exit May Incorrectly Clear IA32_PERF_GLOBAL_CTRL [34:32] AAU101 X Fixed Correctable and Uncorrectable Cache Errors May be Reported Until the First Core C6 Transition AAU102 X X No Fix Accesses to a VMCS May Not Operate Correctly If CR0.CD is Set on Any Logical Processor of a Core AAU103 X X No Fix PCIe Port’s LTSSM May Not Transition Properly in the Presence of TS1 or TS2 Ordered Sets That Have Unexpected Symbols Within those Sets AAU104 X X No Fix NTB/RP Link Will Send Extra TS2 Ordered Set During Link Training C-2 K-0 AAU78 X X AAU79 September 2015 Document Number: 322911-023US PCI Express x16 Port Links May Fail to Dynamically Switch From 5.0GT/s to 2.5GT/s Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 13 Errata (Sheet 5 of 5) Steppings Number Status ERRATA X No Fix PCIe Ports May Not Enter Slave Loopback Mode From the Configuration LTSSM State X X No Fix USB Devices May Not Function Properly With Integrated Graphics While Running Targeted Stress Graphics Workloads With Non-Matching Memory Configurations X X No Fix VM Entry May Omit Consistency Checks Related to Bit 14 (BS) of the Pending Debug Exception Field in Guest-State Area of the VMCS X No Fix Intel Turbo Boost Technology Ratio Changes May Cause Unpredictable System Behavior Fixed Execution of VMPTRLD May Corrupt Memory If Current-VMCS Pointer is Invalid C-2 K-0 AAU105 X AAU106 AAU107 AAU108 AAU109 X AAU110 X X No Fix PerfMon Overflow Status Can Not be Cleared After Certain Conditions Have Occurred AAU111 X X No Fix Intel® Trusted Execution Technology ACM Revocation AAU112 X X No Fix The Corrected Error Count Overflow Bit in IA32_ MC0_STATUS is Not Updated When the UC Bit is Set AAU113 X X No Fix The Upper 32 Bits of CR3 May be Incorrectly Used With 32-Bit Paging AAU114 X X No Fix EPT Violations May Report Bits 11:0 of Guest Linear Address Incorrectly AAU115 X X No Fix IA32_VMX_VMCS_ENUM MSR (48AH) Does Not Properly Report The Highest Index Value Used For VMCS Encoding AAU116 X X No Fix Virtual-APIC Page Accesses With 32-Bit PAE Paging May Cause a System Crash AAU117 X X No Fix An IRET Instruction That Results in a Task Switch Does Not Serialize the Processor Specification Changes Number SPECIFICATION CHANGES None for this revision of this specification update. Specification Clarifications Number SPECIFICATION CLARIFICATIONS None for this revision of this specification update. Documentation Changes Number DOCUMENTATION CHANGES None for this revision of this specification update. Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 14 September 2015 Document Number: 322911-023US Identification Information Component Identification using Programming Interface The Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium® Desktop Processor 6000 Series stepping can be identified by the following register contents: Extended Family1 Extended Model2 Reserved Processor Type3 27:20 19:16 15:14 13:12 11:8 7:4 3:0 00000000b 0010b 00b 0110 0101b xxxxb Reserved 31:28 Note: 1. 2. 3. 4. 5. 6. Family Code4 Model Number5 Stepping ID6 The Extended Family, bits [27:20] are used in conjunction with the Family Code, specified in bits [11:8], to indicate whether the processor belongs to the Intel386, Intel486, Pentium, Pentium Pro, Pentium 4, or Intel® Core™ processor family. The Extended Model, bits [19:16] in conjunction with the Model Number, specified in bits [7:4], are used to identify the model of the processor within the processor’s family. The Processor Type, specified in bits [13:12] indicates whether the processor is an original OEM processor, an OverDrive processor, or a dual processor (capable of being used in a dual processor system). The Family Code corresponds to bits [11:8] of the EDX register after RESET, bits [11:8] of the EAX register after the CPUID instruction is executed with a 1 in the EAX register, and the generation field of the Device ID register accessible through Boundary Scan. The Model Number corresponds to bits [7:4] of the EDX register after RESET, bits [7:4] of the EAX register after the CPUID instruction is executed with a 1 in the EAX register, and the model field of the Device ID register accessible through Boundary Scan. The Stepping ID in bits [3:0] indicates the revision number of that model. See Table 1 for the processor stepping ID number in the CPUID information. When EAX is initialized to a value of ‘1’, the CPUID instruction returns the Extended Family, Extended Model, Processor Type, Family Code, Model Number and Stepping ID value in the EAX register. Note that the EDX processor signature value after reset is equivalent to the processor signature output value in the EAX register. Cache and TLB descriptor parameters are provided in the EAX, EBX, ECX and EDX registers after the CPUID instruction is executed with a 2 in the EAX register. The Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium® Desktop Processor 6000 Series can be identified by the following register contents: Stepping Vendor ID1 Device ID2 Revision ID3 C-2 8086h 0040h 12h Notes: 1. The Vendor ID corresponds to bits 15:0 of the Vendor ID Register located at offset 00–01h in the PCI function 0 configuration space. 2. The Device ID corresponds to bits 15:0 of the Device ID Register located at Device 0 offset 02–03h in the PCI function 0 configuration space. 3. The Revision Number corresponds to bits 7:0 of the Revision ID Register located at offset 08h in the PCI function 0 configuration space. September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 15 Component Marking Information The processor stepping can be identified by the following component markings. Figure 1. Processor Production Top-side Markings (Example) INTEL M ©'08 PROC# BRAND SLxxx [COO] SPEED/CACHE/FMB [FPO] e4 LOT NO S/N Table 1. Processor Identification (Sheet 1 of 2) Core Frequency (GHz) / DDR3 (MHz) / Integrated Graphics Frequency Max Intel® Turbo Boost Technology Frequency (GHz)2 Shared L3 Cache Size (MB) Notes S-Spec Number Processor Number Stepping Processor Signature SLBTM i5-680 K-0 20655h 3.60 / 1333 / 733 2 core: 3.73 1 core: 3.86 4 1, 3, 4, 5, 6, 7, 8, 10 SLBLT i5-670 C-2 20652h 3.46 / 1333 / 733 2 core: 3.60 1 core: 3.73 4 1, 3, 4, 5, 6, 7, 8, 10 SLBNE i5-661 C-2 20652h 3.33 / 1333 / 900 2 core: 3.46 1 core: 3.60 4 3, 5, 7, 8, 9, 10 SLBLV i5-660 C-2 20652h 3.33 / 1333 / 733 2 core: 3.46 1 core: 3.60 4 1, 3, 4, 5, 6, 7, 8, 10 SLBXL i5-655K K-0 20655h 3.20 / 1333 / 733 2 core: 3.33 1 core: 3.46 4 1, 3, 4, 5, 6, 7, 8, 10 SLBLK i5-650 C-2 20652h 3.20 / 1333 / 733 2 core: 3.33 1 core: 3.46 4 1, 3, 4, 5, 6, 7, 8, 10 SLBUD i3-550 K-0 20655h 3.20 / 1333 / 733 N/A 4 1, 3, 5, 8, 10 SLBY2 i3-560 K-0 20655h 3.33 / 1333 / 733 N/A 4 1, 3, 5, 8, 10 SLBMQ i3-540 C-2 20652h 3.06 / 1333 / 733 N/A 4 1, 3, 5, 8, 10 Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 16 September 2015 Document Number: 322911-023US Table 1. Processor Identification (Sheet 2 of 2) S-Spec Number Processor Number Stepping Processor Signature Core Frequency (GHz) / DDR3 (MHz) / Integrated Graphics Frequency SLBLR i3-530 C-2 20652h 2.93 / 1333 / 733 N/A 4 1, 3, 5, 8, 10 SLBMS G6950 C-2 20652h 2.80 / 1066 / 533 N/A 3 1, 5, 10 SLBT6 G6960 C-2 20652h 2.93 / 1066 / 533 N/A 3 1, 5, 10 Max Intel® Turbo Boost Technology Frequency (GHz)2 Shared L3 Cache Size (MB) Notes Notes: 1. This processor has TDP of 73 W. 2. This column indicates maximum Intel® Turbo Boost Technology frequency (GHz) for 2 or 1 cores active respectively. 3. Intel® Hyper-Threading Technology enabled. 4. Intel® Trusted Execution Technology (Intel® TXT) enabled. 5. Intel® Virtualization Technology for IA-32, Intel® 64 and Intel® Architecture (Intel® VT-x) enabled. 6. Intel® Virtualization Technology for Directed I/O (Intel® VT-d) enabled. 7. Intel® AES-NI enabled. 8. Intel SSE4.1 and SSE4.2 enabled. 9. This processor has TDP of 87 W. 10. The core frequency reported in the processor brand string is rounded to 2 decimal digits. (For example, core frequency of 3.4666, repeating 6, is reported as @3.47 in brand string. Core frequency of 3.3333, is reported as @3.33 in brand string.) September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 17 Errata AAU1. The Processor May Report a #TS Instead of a #GP Fault Problem: A jump to a busy TSS (Task-State Segment) may cause a #TS (invalid TSS exception) instead of a #GP fault (general protection exception). Implication: Operation systems that access a busy TSS may get invalid TSS fault instead of a #GP fault. Intel has not observed this erratum with any commercially available software. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU2. REP MOVS/STOS Executing with Fast Strings Enabled and Crossing Page Boundaries with Inconsistent Memory Types may use an Incorrect Data Size or Lead to Memory-Ordering Violations Problem: Under certain conditions as described in the Software Developers Manual section "Outof-Order Stores For String Operations in Pentium 4, Intel Xeon, and P6 Family Processors" the processor performs REP MOVS or REP STOS as fast strings. Due to this erratum fast string REP MOVS/REP STOS instructions that cross page boundaries from WB/WC memory types to UC/WP/WT memory types, may start using an incorrect data size or may observe memory ordering violations. Implication: Upon crossing the page boundary the following may occur, dependent on the new page memory type: • UC the data size of each write will now always be 8 bytes, as opposed to the original data size. • WP the data size of each write will now always be 8 bytes, as opposed to the original data size and there may be a memory ordering violation. • WT there may be a memory ordering violation. Workaround: Software should avoid crossing page boundaries from WB or WC memory type to UC, WP or WT memory type within a single REP MOVS or REP STOS instruction that will execute with fast strings enabled. Status: For the steppings affected, see the Summary Tables of Changes. Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 18 September 2015 Document Number: 322911-023US AAU3. Code Segment Limit/Canonical Faults on RSM May Be Serviced before Higher Priority Interrupts/Exceptions and May Push the Wrong Address onto the Stack Problem: Normally, when the processor encounters a Segment Limit or Canonical Fault due to code execution, a #GP (General Protection Exception) fault is generated after all higher priority Interrupts and exceptions are serviced. Due to this erratum, if RSM (Resume from System Management Mode) returns to execution flow that results in a Code Segment Limit or Canonical Fault, the #GP fault may be serviced before a higher priority Interrupt or Exception (e.g., NMI (Non-Maskable Interrupt), Debug break(#DB), Machine Check (#MC), etc.). If the RSM attempts to return to a noncanonical address, the address pushed onto the stack for this #GP fault may not match the non-canonical address that caused the fault. Implication: Operating systems may observe a #GP fault being serviced before higher priority Interrupts and Exceptions. Intel has not observed this erratum on any commerciallyavailable software. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU4. Performance Monitor SSE Retired Instructions May Return Incorrect Values Problem: Performance Monitoring counter SIMD_INST_RETIRED (Event: C7H) is used to track retired SSE instructions. Due to this erratum, the processor may also count other types of instructions resulting in higher than expected values. Implication: Performance Monitoring counter SIMD_INST_RETIRED may report count higher than expected. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 19 AAU5. Premature Execution of a Load Operation Prior to Exception Handler Invocation Problem: If any of the below circumstances occur, it is possible that the load portion of the instruction will have executed before the exception handler is entered. • If an instruction that performs a memory load causes a code segment limit violation. • If a waiting X87 floating-point (FP) instruction or MMX™ technology (MMX) instruction that performs a memory load has a floating-point exception pending. • If an MMX or SSE/SSE2/SSE3/SSSE3 extensions (SSE) instruction that performs a memory load and has either CR0.EM=1 (Emulation bit set), or a floating-point Topof-Stack (FP TOS) not equal to 0, or a DNA exception pending. Implication: In normal code execution where the target of the load operation is to write back memory there is no impact from the load being prematurely executed, or from the restart and subsequent re-execution of that instruction by the exception handler. If the target of the load is to uncached memory that has a system side-effect, restarting the instruction may cause unexpected system behavior due to the repetition of the sideeffect. Particularly, while CR0.TS [bit 3] is set, a MOVD/MOVQ with MMX/XMM register operands may issue a memory load before getting the DNA exception. Workaround: Code which performs loads from memory that has side-effects can effectively workaround this behavior by using simple integer-based load instructions when accessing side-effect memory and by ensuring that all code is written such that a code segment limit violation cannot occur as a part of reading from side-effect memory. Status: For the steppings affected, see the Summary Tables of Changes. AAU6. MOV To/From Debug Registers Causes Debug Exception Problem: When in V86 mode, if a MOV instruction is executed to/from a debug registers, a general-protection exception (#GP) should be generated. However, in the case when the general detect enable flag (GD) bit is set, the observed behavior is that a debug exception (#DB) is generated instead. Implication: With debug-register protection enabled (i.e., the GD bit set), when attempting to execute a MOV on debug registers in V86 mode, a debug exception will be generated instead of the expected general-protection fault. Workaround: In general, operating systems do not set the GD bit when they are in V86 mode. The GD bit is generally set and used by debuggers. The debug exception handler should check that the exception did not occur in V86 mode before continuing. If the exception did occur in V86 mode, the exception may be directed to the general-protection exception handler. Status: For the steppings affected, see the Summary Tables of Changes. Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 20 September 2015 Document Number: 322911-023US AAU7. Incorrect Address Computed for Last Byte of FXSAVE/FXRSTOR Image Leads to Partial Memory Update Problem: A partial memory state save of the 512-byte FXSAVE image or a partial memory state restore of the FXRSTOR image may occur if a memory address exceeds the 64KB limit while the processor is operating in 16-bit mode or if a memory address exceeds the 4GB limit while the processor is operating in 32-bit mode. Implication: FXSAVE/FXRSTOR will incur a #GP fault due to the memory limit violation as expected but the memory state may be only partially saved or restored. Workaround: Software should avoid memory accesses that wrap around the respective 16-bit and 32-bit mode memory limits. Status: For the steppings affected, see the Summary Tables of Changes. AAU8. Values for LBR/BTS/BTM Will Be Incorrect after an Exit from SMM Problem: After a return from SMM (System Management Mode), the CPU will incorrectly update the LBR (Last Branch Record) and the BTS (Branch Trace Store), hence rendering their data invalid. The corresponding data if sent out as a BTM on the system bus will also be incorrect. Problem: Note: This issue would only occur when one of the 3 above mentioned debug support facilities are used. Implication: The value of the LBR, BTS, and BTM immediately after an RSM operation should not be used. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU9. Single Step Interrupts with Floating Point Exception Pending May Be Mishandled Problem: In certain circumstances, when a floating point exception (#MF) is pending during single-step execution, processing of the single-step debug exception (#DB) may be mishandled. Implication: When this erratum occurs, #DB will be incorrectly handled as follows: • #DB is signaled before the pending higher priority #MF (Interrupt 16) • #DB is generated twice on the same instruction Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 21 AAU10. Fault on ENTER Instruction May Result in Unexpected Values on Stack Frame Problem: The ENTER instruction is used to create a procedure stack frame. Due to this erratum, if execution of the ENTER instruction results in a fault, the dynamic storage area of the resultant stack frame may contain unexpected values (i.e., residual stack data as a result of processing the fault). Implication: Data in the created stack frame may be altered following a fault on the ENTER instruction. Refer to "Procedure Calls For Block-Structured Languages" in IA-32 Intel® Architecture Software Developer's Manual, Vol. 1, Basic Architecture, for information on the usage of the ENTER instructions. This erratum is not expected to occur in Ring 3. Faults are usually processed in Ring 0 and stack switch occurs when transferring to Ring 0. Intel has not observed this erratum on any commercially-available software. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU11. IRET under Certain Conditions May Cause an Unexpected Alignment Check Exception Problem: In IA-32e mode, it is possible to get an Alignment Check Exception (#AC) on the IRET instruction even though alignment checks were disabled at the start of the IRET. This can only occur if the IRET instruction is returning from CPL3 code to CPL3 code. IRETs from CPL0/1/2 are not affected. This erratum can occur if the EFLAGS value on the stack has the AC flag set, and the interrupt handler's stack is misaligned. In IA-32e mode, RSP is aligned to a 16-byte boundary before pushing the stack frame. Implication: In IA-32e mode, under the conditions given above, an IRET can get a #AC even if alignment checks are disabled at the start of the IRET. This erratum can only be observed with a software generated stack frame. Workaround: Software should not generate misaligned stack frames for use with IRET. Status: For the steppings affected, see the Summary Tables of Changes. AAU12. General Protection Fault (#GP) for Instructions Greater than 15 Bytes May be Preempted Problem: When the processor encounters an instruction that is greater than 15 bytes in length, a #GP is signaled when the instruction is decoded. Under some circumstances, the #GP fault may be preempted by another lower priority fault (e.g., Page Fault (#PF)). However, if the preempting lower priority faults are resolved by the operating system and the instruction retried, a #GP fault will occur. Implication: Software may observe a lower-priority fault occurring before or in lieu of a #GP fault. Instructions of greater than 15 bytes in length can only occur if redundant prefixes are placed before the instruction. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 22 September 2015 Document Number: 322911-023US AAU13. General Protection (#GP) Fault May Not Be Signaled on Data Segment Limit Violation above 4-G Limit Problem: In 32-bit mode, memory accesses to flat data segments (base = 00000000h) that occur above the 4-G limit (0ffffffffh) may not signal a #GP fault. Implication: When such memory accesses occur in 32-bit mode, the system may not issue a #GP fault. Workaround: Software should ensure that memory accesses in 32-bit mode do not occur above the 4-G limit (0ffffffffh). Status: For the steppings affected, see the Summary Tables of Changes. AAU14. LBR, BTS, BTM May Report a Wrong Address when an Exception/ Interrupt Occurs in 64-bit Mode Problem: An exception/interrupt event should be transparent to the LBR (Last Branch Record), BTS (Branch Trace Store) and BTM (Branch Trace Message) mechanisms. However, during a specific boundary condition where the exception/interrupt occurs right after the execution of an instruction at the lower canonical boundary (0x00007FFFFFFFFFFF) in 64-bit mode, the LBR return registers will save a wrong return address with Bits 63 to 48 incorrectly sign extended to all 1's. Subsequent BTS and BTM operations which report the LBR will also be incorrect. Implication: LBR, BTS and BTM may report incorrect information in the event of an exception/ interrupt. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU15. MCi_Status Overflow Bit May Be Incorrectly Set on a Single Instance of a DTLB Error Problem: A single Data Translation Look Aside Buffer (DTLB) error can incorrectly set the Overflow (bit [62]) in the MCi_Status register. A DTLB error is indicated by MCA error code (bits [15:0]) appearing as binary value, 000x 0000 0001 0100, in the MCi_Status register. Implication: Due to this erratum, the Overflow bit in the MCi_Status register may not be an accurate indication of multiple occurrences of DTLB errors. There is no other impact to normal processor functionality. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU16. Debug Exception Flags DR6.B0-B3 Flags May be Incorrect for Disabled Breakpoints Problem: When a debug exception is signaled on a load that crosses cache lines with data forwarded from a store and whose corresponding breakpoint enable flags are disabled (DR7.G0-G3 and DR7.L0-L3), the DR6.B0-B3 flags may be incorrect. Implication: The debug exception DR6.B0-B3 flags may be incorrect for the load if the corresponding breakpoint enable flag in DR7 is disabled. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 23 AAU17. MONITOR or CLFLUSH on the Local XAPIC's Address Space Results in Hang Problem: If the target linear address range for a MONITOR or CLFLUSH is mapped to the local xAPIC's address space, the processor will hang. Implication: When this erratum occurs, the processor will hang. The local xAPIC's address space must be uncached. The MONITOR instruction only functions correctly if the specified linear address range is of the type write-back. CLFLUSH flushes data from the cache. Intel has not observed this erratum with any commercially-available software. Workaround: Do not execute MONITOR or CLFLUSH instructions on the local xAPIC address space. Status: For the steppings affected, see the Summary Tables of Changes. AAU18. Corruption of CS Segment Register During RSM While Transitioning From Real Mode to Protected Mode Problem: During the transition from real mode to protected mode, if an SMI (System Management Interrupt) occurs between the MOV to CR0 that sets PE (Protection Enable, bit 0) and the first FAR JMP, the subsequent RSM (Resume from System Management Mode) may cause the lower two bits of CS segment register to be corrupted. Implication: The corruption of the bottom two bits of the CS segment register will have no impact unless software explicitly examines the CS segment register between enabling protected mode and the first FAR JMP. Intel® 64 and IA-32 Architectures Software Developer’s Manual Volume 3A: System Programming Guide, Part 1, in the section titled "Switching to Protected Mode" recommends the FAR JMP immediately follows the write to CR0 to enable protected mode. Intel has not observed this erratum with any commercially-available software. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU19. Performance Monitoring Events for Read Miss to Level 3 Cache Fill Occupancy Counter may be Incorrect Problem: Whenever an Level 3 cache fill conflicts with another request's address, the miss to fill occupancy counter, UNC_GQ_ALLOC.RT_LLC_MISS (Event 02H), will provide erroneous results. Implication: The Performance Monitoring UNC_GQ_ALLOC.RT_LLC_MISS event may count a value higher than expected. The extent to which the value is higher than expected is determined by the frequency of the L3 address conflict. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 24 September 2015 Document Number: 322911-023US AAU20. A VM Exit on MWAIT May Incorrectly Report the Monitoring Hardware as Armed Problem: A processor write to the address range armed by the MONITOR instruction may not immediately trigger the monitoring hardware. Consequently, a VM exit on a later MWAIT may incorrectly report the monitoring hardware as armed, when it should be reported as unarmed due to the write occurring prior to the MWAIT. Implication: If a write to the range armed by the MONITOR instruction occurs between the MONITOR and the MWAIT, the MWAIT instruction may start executing before the monitoring hardware is triggered. If the MWAIT instruction causes a VM exit, this could cause its exit qualification to incorrectly report 0x1. In the recommended usage model for MONITOR/MWAIT, there is no write to the range armed by the MONITOR instruction between the MONITOR and the MWAIT. Workaround: Software should never write to the address range armed by the MONITOR instruction between the MONITOR and the subsequent MWAIT. Status: For the steppings affected, see the Summary Tables of Changes. AAU21. Performance Monitor Event SEGMENT_REG_LOADS Counts Inaccurately Problem: The performance monitor event SEGMENT_REG_LOADS (Event 06H) counts instructions that load new values into segment registers. The value of the count may be inaccurate. Implication: The performance monitor event SEGMENT_REG_LOADS may reflect a count higher or lower than the actual number of events. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU22. #GP on Segment Selector Descriptor that Straddles Canonical Boundary May Not Provide Correct Exception Error Code Problem: During a #GP (General Protection Exception), the processor pushes an error code on to the exception handler’s stack. If the segment selector descriptor straddles the canonical boundary, the error code pushed onto the stack may be incorrect. Status: An incorrect error code may be pushed onto the stack. Intel has not observed this erratum with any commercially-available software. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU23. Improper Parity Error Signaled in the IQ Following Reset When a Code Breakpoint is Set on a #GP Instruction Problem: While coming out of cold reset or exiting from C6, if the processor encounters an instruction longer than 15 bytes (which causes a #GP) and a code breakpoint is enabled on that instruction, an IQ (Instruction Queue) parity error may be incorrectly logged resulting in an MCE (Machine Check Exception). Implication: When this erratum occurs, an MCE may be incorrectly signaled. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 25 AAU24. An Enabled Debug Breakpoint or Single Step Trap May Be Taken after MOV SS/POP SS Instruction if it is Followed by an Instruction That Signals a Floating Point Exception Problem: A MOV SS/POP SS instruction should inhibit all interrupts including debug breakpoints until after execution of the following instruction. This is intended to allow the sequential execution of MOV SS/POP SS and MOV [r/e]SP, [r/e]BP instructions without having an invalid stack during interrupt handling. However, an enabled debug breakpoint or single step trap may be taken after MOV SS/POP SS if this instruction is followed by an instruction that signals a floating point exception rather than a MOV [r/e]SP, [r/e]BP instruction. This results in a debug exception being signaled on an unexpected instruction boundary since the MOV SS/POP SS and the following instruction should be executed atomically. Implication: This can result in incorrect signaling of a debug exception and possibly a mismatched Stack Segment and Stack Pointer. If MOV SS/POP SS is not followed by a MOV [r/e]SP, [r/e]BP, there may be a mismatched Stack Segment and Stack Pointer on any exception. Intel has not observed this erratum with any commercially-available software or system. Workaround: As recommended in the IA32 Intel® Architecture Software Developer’s Manual, the use of MOV SS/POP SS in conjunction with MOV [r/e]SP, [r/e]BP will avoid the failure since the MOV [r/e]SP, [r/e]BP will not generate a floating point exception. Developers of debug tools should be aware of the potential incorrect debug event signaling created by this erratum. Status: For the steppings affected, see the Summary Tables of Changes. AAU25. IA32_MPERF Counter Stops Counting During On-Demand TM1 Problem: According to the Intel® 64 and IA-32 Architectures Software Developer’s Manual Volume 3A: System Programming Guide, the ratio of IA32_MPERF (MSR E7H) to IA32_APERF (MSR E8H) should reflect actual performance while TM1 or on-demand throttling is activated. Due to this erratum, IA32_MPERF MSR stops counting while TM1 or on-demand throttling is activated, and the ratio of the two will indicate higher processor performance than actual. Implication: The incorrect ratio of IA32_APERF/IA32_MPERF can mislead software P-state (performance state) management algorithms under the conditions described above. It is possible for the Operating System to observe higher processor utilization than actual, which could lead the OS into raising the P-state. During TM1 activation, the OS P-state request is irrelevant and while on-demand throttling is enabled, it is expected that the OS will not be changing the P-state. This erratum should result in no practical implication to software. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU26. Synchronous Reset of IA32_APERF/IA32_MPERF Counters on Overflow Does Not Work Problem: When either the IA32_MPERF or IA32_APERF MSR (E7H, E8H) increments to its maximum value of 0xFFFF_FFFF_FFFF_FFFF, both MSRs are supposed to synchronously reset to 0x0 on the next clock. This synchronous reset does not work. Instead, both MSRs increment and overflow independently. Implication: Software can not rely on synchronous reset of the IA32_APERF/IA32_MPERF registers. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 26 September 2015 Document Number: 322911-023US AAU27. Disabling Thermal Monitor While Processor is Hot, Then Re-enabling, May Result in Stuck Core Operating Ratio Problem: If a processor is at its TCC (Thermal Control Circuit) activation temperature and then Thermal Monitor is disabled by a write to IA32_MISC_ENABLES MSR (1A0H) bit [3], a subsequent re-enable of Thermal Monitor will result in an artificial ceiling on the maximum core P-state. The ceiling is based on the core frequency at the time of Thermal Monitor disable. This condition will only correct itself once the processor reaches its TCC activation temperature again. Implication: Since Intel requires that Thermal Monitor be enabled in order to be operating within specification, this erratum should never be seen during normal operation. Workaround: Software should not disable Thermal Monitor during processor operation. Status: For the steppings affected, see the Summary Tables of Changes. AAU28. Writing the Local Vector Table (LVT) when an Interrupt is Pending May Cause an Unexpected Interrupt Problem: If a local interrupt is pending when the LVT entry is written, an interrupt may be taken on the new interrupt vector even if the mask bit is set. Implication: An interrupt may immediately be generated with the new vector when a LVT entry is written, even if the new LVT entry has the mask bit set. If there is no Interrupt Service Routine (ISR) set up for that vector the system will GP fault. If the ISR does not do an End of Interrupt (EOI) the bit for the vector will be left set in the in-service register and mask all interrupts at the same or lower priority. Workaround: Any vector programmed into an LVT entry must have an ISR associated with it, even if that vector was programmed as masked. This ISR routine must do an EOI to clear any unexpected interrupts that may occur. The ISR associated with the spurious vector does not generate an EOI, therefore the spurious vector should not be used when writing the LVT. Status: For the steppings affected, see the Summary Tables of Changes. AAU29. xAPIC Timer May Decrement Too Quickly Following an Automatic Reload While in Periodic Mode Problem: When the xAPIC Timer is automatically reloaded by counting down to zero in periodic mode, the xAPIC Timer may slip in its synchronization with the external clock. The xAPIC timer may be shortened by up to one xAPIC timer tick. Implication: When the xAPIC Timer is automatically reloaded by counting down to zero in periodic mode, the xAPIC Timer may slip in its synchronization with the external clock. The xAPIC timer may be shortened by up to one xAPIC timer tick. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 27 AAU30. Reported Memory Type May Not Be Used to Access the VMCS and Referenced Data Structures Problem: Bits 53:50 of the IA32_VMX_BASIC MSR report the memory type that the processor uses to access the VMCS and data structures referenced by pointers in the VMCS. Due to this erratum, a VMX access to the VMCS or referenced data structures will instead use the memory type that the MTRRs (memory-type range registers) specify for the physical address of the access. Implication: Bits 53:50 of the IA32_VMX_BASIC MSR report that the WB (write-back) memory type will be used but the processor may use a different memory type. Workaround: Software should ensure that the VMCS and referenced data structures are located at physical addresses that are mapped to WB memory type by the MTRRs. Status: For the steppings affected, see the Summary Tables of Changes. AAU31. Changing the Memory Type for an In-Use Page Translation May Lead to Memory-Ordering Violations Problem: Under complex microarchitectural conditions, if software changes the memory type for data being actively used and shared by multiple threads without the use of semaphores or barriers, software may see load operations execute out of order. Implication: Memory ordering may be violated. Intel has not observed this erratum with any commercially-available software. Workaround: Software should ensure pages are not being actively used before requesting their memory type be changed. Status: For the steppings affected, see the Summary Tables of Changes. AAU32. Erratum AAU32 added to this specification Update in error; all erratum details removed from the specification update document. AAU33. Delivery of Certain Events Immediately Following a VM Exit May Push a Corrupted RIP onto the Stack Problem: If any of the following events is delivered immediately following a VM exit to 64-bit mode from outside 64-bit mode, bits 63:32 of the RIP value pushed on the stack may be cleared to 0: • A non-maskable interrupt (NMI); • A machine-check exception (#MC); • A page fault (#PF) during instruction fetch; or • A general-protection exception (#GP) due to an attempt to decode an instruction whose length is greater than 15 bytes. Implication: Unexpected behavior may occur due to the incorrect value of the RIP on the stack. Specifically, return from the event handler via IRET may encounter an unexpected page fault or may begin fetching from an unexpected code address. Workaround: It is possible for the BIOS to contain a workaround for this erratum. Status: For the steppings affected, see the Summary Tables of Changes. Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 28 September 2015 Document Number: 322911-023US AAU34. Infinite Stream of Interrupts May Occur if an ExtINT Delivery Mode Interrupt is Received while All Cores in C6 Problem: If all logical processors in a core are in C6, an ExtINT delivery mode interrupt is pending in the xAPIC and interrupts are blocked with EFLAGS.IF=0, the interrupt will be processed after C6 wakeup and after interrupts are re-enabled (EFLAGS.IF=1). However, the pending interrupt event will not be cleared. Implication: Due to this erratum, an infinite stream of interrupts will occur on the core servicing the external interrupt. Intel has not observed this erratum with any commercially-available software/system. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU35. Two xAPIC Timer Event Interrupts May Unexpectedly Occur Problem: If an xAPIC timer event is enabled and while counting down the current count reaches 1 at the same time that the processor thread begins a transition to a low power Cstate, the xAPIC may generate two interrupts instead of the expected one when the processor returns to C0. Implication: Due to this erratum, two interrupts may unexpectedly be generated by an xAPIC timer event. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU36. EOI Transaction May Not be Sent if Software Enters Core C6 During an Interrupt Service Routine Problem: If core C6 is entered after the start of an interrupt service routine but before a write to the APIC EOI (End of Interrupt) register, and the core is woken up by an event other than a fixed interrupt source the core may drop the EOI transaction the next time APIC EOI register is written and further interrupts from the same or lower priority level will be blocked. Implication: EOI transactions and interrupts may be blocked when core C6 is used during interrupt service routines. Intel has not observed this erratum with any commercially-available software. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 29 AAU37. FREEZE_WHILE_SMM Does Not Prevent Event From Pending PEBS During SMM Problem: In general, a PEBS record should be generated on the first count of the event after the counter has overflowed. However, IA32_DEBUGCTL_MSR.FREEZE_WHILE_SMM (MSR 1D9H, bit [14]) prevents performance counters from counting during SMM (System Management Mode). Due to this erratum, if 1. A performance counter overflowed before an SMI 2. A PEBS record has not yet been generated because another count of the event has not occurred 3. The monitored event occurs during SMM then a PEBS record will be saved after the next RSM instruction. When FREEZE_WHILE_SMM is set, a PEBS should not be generated until the event occurs outside of SMM. Implication: A PEBS record may be saved after an RSM instruction due to the associated performance counter detecting the monitored event during SMM; even when FREEZE_WHILE_SMM is set. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU38. APIC Error “Received Illegal Vector” May be Lost Problem: APIC (Advanced Programmable Interrupt Controller) may not update the ESR (Error Status Register) flag Received Illegal Vector bit [6] properly when an illegal vector error is received on the same internal clock that the ESR is being written (as part of the write-read ESR access flow). The corresponding error interrupt will also not be generated for this case. Implication: Due to this erratum, an incoming illegal vector error may not be logged into ESR properly and may not generate an error interrupt. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU39. DR6 May Contain Incorrect Information When the First Instruction After a MOV SS,r/m or POP SS is a Store Problem: Normally, each instruction clears the changes in DR6 (Debug Status Register) caused by the previous instruction. However, the instruction following a MOV SS,r/m (MOV to the stack segment selector) or POP SS (POP stack segment selector) instruction will not clear the changes in DR6 because data breakpoints are not taken immediately after a MOV SS,r/m or POP SS instruction. Due to this erratum, any DR6 changes caused by a MOV SS,r/m or POP SS instruction may be cleared if the following instruction is a store. Implication: When this erratum occurs, incorrect information may exist in DR6. This erratum will not be observed under normal usage of the MOV SS,r/m or POP SS instructions (i.e., following them with an instruction that writes [e/r]SP). When debugging or when developing debuggers, this behavior should be noted. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 30 September 2015 Document Number: 322911-023US AAU40. An Uncorrectable Error Logged in IA32_CR_MC2_STATUS May Also Result in a System Hang Problem: Uncorrectable errors logged in IA32_CR_MC2_STATUS MSR (409H) may also result in a system hang causing an Internal Timer Error (MCACOD = 0x0400h) to be logged in another machine check bank (IA32_MCi_STATUS). Implication: Uncorrectable errors logged in IA32_CR_MC2_STATUS can further cause a system hang and an Internal Timer Error to be logged. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU41. IA32_PERF_GLOBAL_CTRL MSR May Be Incorrectly Initialized Problem: The IA32_PERF_GLOBAL_CTRL MSR (38FH) bits [34:32] may be incorrectly set to 7H after reset; the correct value should be 0H. Implication: The IA32_PERF_GLOBAL_CTRL MSR bits [34:32] may be incorrect after reset (EN_FIXED_CTR{0, 1, 2} may be enabled). Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU42. Performance Monitor Counter MEM_INST_RETIRED.STORES May Count Higher than Expected Problem: Performance Monitoring counter MEM_INST_RETIRED.STORES (Event: 0BH, Umask: 02H) is used to track retired instructions which contain a store operation. Due to this erratum, the processor may also count other types of instructions including WRMSR and MFENCE. Implication: Performance Monitoring counter MEM_INST_RETIRED.STORES may report counts higher than expected. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU43. Sleeping Cores May Not be Woken Up on Logical Cluster Mode Broadcast IPI Using Destination Field Instead of Shorthand Problem: If software sends a logical cluster broadcast IPI using a destination shorthand of 00B (No Shorthand) and writes the cluster portion of the Destination Field of the Interrupt Command Register to all ones while not using all 1s in the mask portion of the Destination Field, target cores in a sleep state that are identified by the mask portion of the Destination Field may not be woken up. This erratum does not occur if the destination shorthand is set to 10B (All Including Self) or 11B (All Excluding Self). Implication: When this erratum occurs, cores which are in a sleep state may not wake up to handle the broadcast IPI. Intel has not observed this erratum with any commercially-available software. Workaround: Use destination shorthand of 10B or 11B to send broadcast IPIs. Status: For the steppings affected, see the Summary Tables of Changes. September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 31 AAU44. Faulting Executions of FXRSTOR May Update State Inconsistently Problem: The state updated by a faulting FXRSTOR instruction may vary from one execution to another. Implication: Software that relies on x87 state or SSE state following a faulting execution of FXRSTOR may behave inconsistently. Workaround: Software handling a fault on an execution of FXRSTOR can compensate for execution variability by correcting the cause of the fault and executing FXRSTOR again. Status: For the steppings affected, see the Summary Tables of Changes. AAU45. Performance Monitor Event EPT.EPDPE_MISS May be Counted While EPT is Disable Problem: Performance monitor event EPT.EPDPE_MISS (Event: 4FH, Umask: 08H) is used to count Page Directory Pointer table misses while EPT (extended page tables) is enabled. Due to this erratum, the processor will count Page Directory Pointer table misses regardless of whether EPT is enabled or not. Implication: Due to this erratum, performance monitor event EPT.EPDPE_MISS may report counts higher than expected. Workaround: Software should ensure this event is only enabled while in EPT mode. Status: For the steppings affected, see the Summary Tables of Changes. AAU46. Memory Aliasing of Code Pages May Cause Unpredictable System Behavior Problem: The type of memory aliasing contributing to this erratum is the case where two different logical processors have the same code page mapped with two different memory types. Specifically, if one code page is mapped by one logical processor as write-back and by another as uncachable and certain instruction fetch timing conditions occur, the system may experience unpredictable behavior. Implication: If this erratum occurs the system may have unpredictable behavior including a system hang. The aliasing of memory regions, a condition necessary for this erratum to occur, is documented as being unsupported in the Intel 64 and IA-32 Intel® Architecture Software Developer's Manual, Volume 3A, in the section titled Programming the PAT. Intel has not observed this erratum with any commercially-available software or system. Workaround: Code pages should not be mapped with uncacheable and cacheable memory types at the same time. Status: For the steppings affected, see the Summary Tables of Changes. Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 32 September 2015 Document Number: 322911-023US AAU47. Performance Monitor Counters May Count Incorrectly Problem: Under certain circumstances, a general purpose performance counter, IA32_PMC0-4 (C1H - C4H), may count at core frequency or not count at all instead of counting the programmed event. Implication: The Performance Monitor Counter IA32_PMCx may not properly count the programmed event. Due to the requirements of the workaround there may be an interruption in the counting of a previously programmed event during the programming of a new event. Workaround: Before programming the performance event select registers, IA32_PERFEVTSELx MSR (186H - 189H), the internal monitoring hardware must be cleared. This is accomplished by first disabling, saving valid events and clearing from the select registers, then programming three event values 0x4300D2, 0x4300B1 and 0x4300B5 into the IA32_PERFEVTSELx MSRs, and finally continuing with new event programming and restoring previous programming if necessary. Each performance counter, IA32_PMCx, must have its corresponding IA32_PREFEVTSELx MSR programmed with at least one of the event values and must be enabled in IA32_PERF_GLOBAL_CTRL MSR (38FH) bits [3:0]. All three values must be written to either the same or different IA32_PERFEVTSELx MSRs before programming the performance counters. Note that the performance counter will not increment when its IA32_PERFEVTSELx MSR has a value of 0x4300D2, 0x4300B1 or 0x4300B5 because those values have a zero UMASK field (bits [15:8]). Status: For the steppings affected, see the Summary Tables of Changes. AAU48. Performance Monitor Event Offcore_response_0 (B7H) Does Not Count NT Stores to Local DRAM Correctly Problem: When a IA32_PERFEVTSELx MSR is programmed to count the Offcore_response_0 event (Event:B7H), selections in the OFFCORE_RSP_0 MSR (1A6H) determine what is counted. The following two selections do not provide accurate counts when counting NT (Non-Temporal) Stores: • OFFCORE_RSP_0 MSR bit [14] is set to 1 (LOCAL_DRAM) and bit [7] is set to 1 (OTHER): NT Stores to Local DRAM are not counted when they should have been. • OFFCORE_RSP_0 MSR bit [9] is set to (OTHER_CORE_HIT_SNOOP) and bit [7] is set to 1 (OTHER): NT Stores to Local DRAM are counted when they should not have been. Implication: The counter for the Offcore_response_0 event may be incorrect for NT stores. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 33 AAU49. EFLAGS Discrepancy on Page Faults and on EPT-Induced VM Exits after a Translation Change Problem: This erratum is regarding the case where paging structures are modified to change a linear address from writable to non-writable without software performing an appropriate TLB invalidation. When a subsequent access to that address by a specific instruction (ADD, AND, BTC, BTR, BTS, CMPXCHG, DEC, INC, NEG, NOT, OR, ROL/ROR, SAL/SAR/SHL/SHR, SHLD, SHRD, SUB, XOR, and XADD) causes a page fault or an EPTinduced VM exit, the value saved for EFLAGS may incorrectly contain the arithmetic flag values that the EFLAGS register would have held had the instruction completed without fault or VM exit. For page faults, this can occur even if the fault causes a VM exit or if its delivery causes a nested fault. Implication: None identified. Although the EFLAGS value saved by an affected event (a page fault or an EPT-induced VM exit) may contain incorrect arithmetic flag values, Intel has not identified software that is affected by this erratum. This erratum will have no further effects once the original instruction is restarted because the instruction will produce the same results as if it had initially completed without fault or VM exit. Workaround: If the handler of the affected events inspects the arithmetic portion of the saved EFLAGS value, then system software should perform a synchronized paging structure modification and TLB invalidation. Status: For the steppings affected, see the Summary Tables of Changes. AAU50. Back to Back Uncorrected Machine Check Errors May Overwrite IA32_MC3_STATUS.MSCOD Problem: When back-to-back uncorrected machine check errors occur that would both be logged in the IA32_MC3_STATUS MSR (40CH), the IA32_MC3_STATUS.MSCOD (bits [31:16]) field may reflect the status of the most recent error and not the first error. The rest of the IA32_MC3_STATUS MSR contains the information from the first error. Implication: Software should not rely on the value of IA32_MC3_STATUS.MSCOD if IA32_MC3_STATUS.OVER (bit [62]) is set. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU51. Corrected Errors With a Yellow Error Indication May be Overwritten by Other Corrected Errors Problem: A corrected cache hierarchy data or tag error that is reported with IA32_MCi_STATUS.MCACOD (bits [15:0]) with value of 000x_0001_xxxx_xx01 (where x stands for zero or one) and a yellow threshold-based error status indication (bits [54:53] equal to 10B) may be overwritten by a corrected error with a no tracking indication (00B) or green indication (01B). Implication: Corrected errors with a yellow threshold-based error status indication may be overwritten by a corrected error without a yellow indication. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 34 September 2015 Document Number: 322911-023US AAU52. Performance Monitor Events DCACHE_CACHE_LD and DCACHE_CACHE_ST May Overcount Problem: The performance monitor events DCACHE_CACHE_LD (Event 40H) and DCACHE_CACHE_ST (Event 41H) count cacheable loads and stores that hit the L1 cache. Due to this erratum, in addition to counting the completed loads and stores, the counter will incorrectly count speculative loads and stores that were aborted prior to completion. Implication: The performance monitor events DCACHE_CACHE_LD and DCACHE_CACHE_ST may reflect a count higher than the actual number of events. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU53. Rapid Core C3/C6 Transitions May Cause Unpredictable System Behavior Problem: Under a complex set of internal conditions, cores rapidly performing C3/C6 transitions in a system with Intel® Hyper-Threading Technology enabled may cause a machine check error (IA32_MCi_STATUS.MCACOD = 0x0106), system hang or unpredictable system behavior. Implication: This erratum may cause a machine check error, system hang or unpredictable system behavior. Workaround: It is possible for the BIOS to contain a workaround for this erratum. Status: For the steppings affected, see the Summary Tables of Changes. AAU54. APIC Timer CCR May Report 0 in Periodic Mode Problem: In periodic mode the APIC timer CCR (current-count register) is supposed to be automatically reloaded from the initial-count register when the count reaches 0, consequently software would never be able to observe a value of 0. Due to this erratum, software may read 0 from the CCR when the timer has counted down and is in the process of re-arming. Implication: Due to this erratum, an unexpected value of 0 may be read from the APIC timer CCR when in periodic mode. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU55. Performance Monitor Events INSTR_RETIRED and MEM_INST_RETIRED May Count Inaccurately Problem: The performance monitor event INSTR_RETIRED (Event C0H) should count the number of instructions retired, and MEM_INST_ RETIRED (Event 0BH) should count the number of load or store instructions retired. However, due to this erratum, they may undercount. Implication: The performance monitor event INSTR_RETIRED and MEM_INST_RETIRED may reflect a count lower than the actual number of events. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 35 AAU56. A Page Fault May Not be Generated When the PS bit is set to "1" in a PML4E or PDPTE Problem: On processors supporting Intel® 64 architecture, the PS bit (Page Size, bit 7) is reserved in PML4Es and PDPTEs. If the translation of the linear address of a memory access encounters a PML4E or a PDPTE with PS set to 1, a page fault should occur. Due to this erratum, PS of such an entry is ignored and no page fault will occur due to its being set. Implication: Software may not operate properly if it relies on the processor to deliver page faults when reserved bits are set in paging-structure entries. Workaround: Software should not set Bit 7 in any PML4E or PDPTE that has Present Bit (Bit 0) set to "1". Status: For the steppings affected, see the Summary Tables of Changes. AAU57. BIST Results May be Additionally Reported After a GETSEC[WAKEUP] or INIT-SIPI Sequence Problem: BIST results should only be reported in EAX the first time a logical processor wakes up from the Wait-For-SIPI state. Due to this erratum, BIST results may be additionally reported after INIT-SIPI sequences and when waking up RLP's from the SENTER sleep state using the GETSEC[WAKEUP] command. Implication: An INIT-SIPI sequence may show a non-zero value in EAX upon wakeup when a zero value is expected. RLP's waking up for the SENTER sleep state using the GETSEC[WAKEUP] command may show a different value in EAX upon wakeup than before going into the SENTER sleep state. Workaround: If necessary software may save the value in EAX prior to launching into the secure environment and restore upon wakeup and/or clear EAX after the INIT-SIPI sequence. Status: For the steppings affected, see the Summary Tables of Changes. AAU58. Pending x87 FPU Exceptions (#MF) May be Signaled Earlier Than Expected Problem: x87 instructions that trigger #MF normally service interrupts before the #MF. Due to this erratum, if an instruction that triggers #MF is executed while Enhanced Intel SpeedStep® Technology transitions, Intel® Turbo Boost Technology transitions, or Thermal Monitor events occur, the pending #MF may be signaled before pending interrupts are serviced. Implication: Software may observe #MF being signaled before pending interrupts are serviced. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 36 September 2015 Document Number: 322911-023US AAU59. VM Exits Due to "NMI-Window Exiting" May Be Delayed by One Instruction Problem: If VM entry is executed with the "NMI-window exiting" VM-execution control set to 1, a VM exit with exit reason "NMI window" should occur before execution of any instruction if there is no virtual-NMI blocking, no blocking of events by MOV SS, and no blocking of events by STI. If VM entry is made with no virtual-NMI blocking but with blocking of events by either MOV SS or STI, such a VM exit should occur after execution of one instruction in VMX non-root operation. Due to this erratum, the VM exit may be delayed by one additional instruction. Implication: VMM software using "NMI-window exiting" for NMI virtualization should generally be unaffected, as the erratum causes at most a one-instruction delay in the injection of a virtual NMI, which is virtually asynchronous. The erratum may affect VMMs relying on deterministic delivery of the affected VM exits. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU60. The Memory Controller tTHROT_OPREF Timings May be Violated During Self Refresh Entry Problem: During self refresh entry, the memory controller may issue more refreshes than permitted by tTHROT_OPREF (bits 29:19 in MC_CHANNEL_{0,1}_REFRESH_TIMING CSR). Implication: The intention of tTHROT_OPREF is to limit current. Since current supply conditions near self refresh entry are not critical, there is no measurable impact due to this erratum. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU61. VM Exits Due to EPT Violations Do Not Record Information About PreIRET NMI Blocking Problem: With certain settings of the VM-execution controls VM exits due to EPT violations set bit 12 of the exit qualification if the EPT violation was a result of an execution of the IRET instruction that commenced with non-maskable interrupts (NMIs) blocked. Due to this erratum, such VM exits will instead clear this bit. Implication: Due to this erratum, a virtual-machine monitor that relies on the proper setting of bit 12 of the exit qualification may deliver NMIs to guest software prematurely. Workaround: It is possible for the BIOS to contain a workaround for this erratum. Status: For the steppings affected, see the Summary Tables of Changes. AAU62. Multiple Performance Monitor Interrupts are Possible on Overflow of IA32_FIXED_CTR2 Problem: When multiple performance counters are set to generate interrupts on an overflow and more than one counter overflows at the same time, only one interrupt should be generated. However, if one of the counters set to generate an interrupt on overflow is the IA32_FIXED_CTR2 (MSR 30BH) counter, multiple interrupts may be generated when the IA32_FIXED_CTR2 overflows at the same time as any of the other performance counters. Implication: Multiple counter overflow interrupts may be unexpectedly generated. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 37 AAU63. LBRs May Not be Initialized During Power-On Reset of the Processor Problem: If a second reset is initiated during the power-on processor reset cycle, the LBRs (Last Branch Records) may not be properly initialized. Implication: Due to this erratum, debug software may not be able to rely on the LBRs out of poweron reset. Workaround: Ensure that the processor has completed its power-on reset cycle prior to initiating a second reset. Status: For the steppings affected, see the Summary Tables of Changes. AAU64. LBR, BTM or BTS Records May have Incorrect Branch From Information After an EIST Transition, T-states, C1E, or Adaptive Thermal Throttling Problem: The "From" address associated with the LBR (Last Branch Record), BTM (Branch Trace Message) or BTS (Branch Trace Store) may be incorrect for the first branch after an EIST (Enhanced Intel® SpeedStep Technology) transition, T-states, C1E (C1 Enhanced), or Adaptive Thermal Throttling. Implication: When the LBRs, BTM or BTS are enabled, some records may have incorrect branch "From" addresses for the first branch after an EIST transition, T-states, C1E, or Adaptive Thermal Throttling. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU65. VMX-Preemption Timer Does Not Count Down at the Rate Specified Problem: The VMX-preemption timer should count down by 1 every time a specific bit in the TSC (Time Stamp Counter) changes. (This specific bit is indicated by IA32_VMX_MISC bits [4:0] (0x485h) and has a value of 5 on the affected processors.) Due to this erratum, the VMX-preemption timer may instead count down at a different rate and may do so only intermittently. Implication: The VMX-preemption timer may cause VM exits at a rate different from that expected by software. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 38 September 2015 Document Number: 322911-023US AAU66. Multiple Performance Monitor Interrupts are Possible on Overflow of Fixed Counter 0 Problem: The processor can be configured to issue a PMI (performance monitor interrupt) upon overflow of the IA32_FIXED_CTR0 MSR (309H). A single PMI should be observed on overflow of IA32_FIXED_CTR0, however multiple PMIs are observed when this erratum occurs. This erratum only occurs when IA32_FIXED_CTR0 overflows and the processor and counter are configured as follows: • Intel® Hyper-Threading Technology is enabled • IA32_FIXED_CTR0 local and global controls are enabled • IA32_FIXED_CTR0 is set to count events only on its own thread (IA32_FIXED_CTR_CTRL MSR (38DH) bit [2] = ‘0) • PMIs are enabled on IA32_FIXED_CTR0 (IA32_FIXED_CTR_CTRL MSR bit [3] = ‘1) • Freeze_on_PMI feature is enabled (IA32_DEBUGCTL MSR (1D9H) bit [12] = ‘1) Implication: When this erratum occurs there may be multiple PMIs observed when IA32_FIXED_CTR0 overflows Workaround: Disable the FREEZE_PERFMON_ON_PMI feature in IA32_DEBUGCTL MSR (1D9H) bit [12]. Status: For the steppings affected, see the Summary Tables of Changes. AAU67. VM Exits Due to LIDT/LGDT/SIDT/SGDT Do Not Report Correct Operand Size Problem: When a VM exit occurs due to a LIDT, LGDT, SIDT, or SGDT instruction with a 32-bit operand, bit 11 of the VM-exit instruction information field should be set to 1. Due to this erratum, this bit is instead cleared to 0 (indicating a 16-bit operand). Implication: Virtual-machine monitors cannot rely on bit 11 of the VM-exit instruction information field to determine the operand size of the instruction causing the VM exit. Workaround: Virtual Machine Monitor software may decode the instruction to determine operand size. Status: For the steppings affected, see the Summary Tables of Changes. AAU68. Performance Monitoring Events STORE_BLOCKS.NOT_STA and STORE_BLOCKS.STA May Not Count Events Correctly Problem: Performance Monitor Events STORE_BLOCKS.NOT_STA and STORE_BLOCKS.STA should only increment the count when a load is blocked by a store. Due to this erratum, the count will be incremented whenever a load hits a store, whether it is blocked or can forward. In addition this event does not count for specific threads correctly. Implication: If Intel® Hyper-Threading Technology is disabled, the Performance Monitor events STORE_BLOCKS.NOT_STA and STORE_BLOCKS.STA may indicate a higher occurrence of loads blocked by stores than have actually occurred. If Intel Hyper-Threading Technology is enabled, the counts of loads blocked by stores may be unpredictable and they could be higher or lower than the correct count. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 39 AAU69. Storage of PEBS Record Delayed Following Execution of MOV SS or STI Problem: When a performance monitoring counter is configured for PEBS (Precise Event Based Sampling), overflow of the counter results in storage of a PEBS record in the PEBS buffer. The information in the PEBS record represents the state of the next instruction to be executed following the counter overflow. Due to this erratum, if the counter overflow occurs after execution of either MOV SS or STI, storage of the PEBS record is delayed by one instruction. Implication: When this erratum occurs, software may observe storage of the PEBS record being delayed by one instruction following execution of MOV SS or STI. The state information in the PEBS record will also reflect the one instruction delay. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU70. AAU71. INVLPG Following INVEPT or INVVPID May Fail to Flush All Translations for a Large Page Problem: This erratum applies if the address of the memory operand of an INVEPT or INVVPID instruction resides on a page larger than 4KBytes and either (1) that page includes the low 1 MBytes of physical memory; or (2) the physical address of the memory operand matches an MTRR that covers less than 4 MBytes. A subsequent execution of INVLPG that targets the large page and that occurs before the next VM-entry instruction may fail to flush all TLB entries for the page. Such entries may persist in the TLB until the next VM-entry instruction. Implication: Accesses to the large page between INVLPG and the next VM-entry instruction may incorrectly use translations that are inconsistent with the in-memory page tables. Workaround: It is possible for the BIOS to contain a workaround for this erratum. Status: For the steppings affected, see the Summary Tables of Changes. Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 40 September 2015 Document Number: 322911-023US AAU72. Logical Processor May Use Incorrect VPID after VM Entry That Returns From SMM Problem: A logical processor in VMX root operation should use VPID 0000H. Due to this erratum, a logical processor may instead use VPID 1FB3H if VMX root operation was entered using a VM entry that returns from SMM. Implication: After a VM entry that sets the "enable VPID" VM-execution control and that establishes VPID 1FB3H, the logical processor may erroneously use TLB entries that were cached in VMX root operation. Workaround: It is possible for the BIOS to contain a workaround for this erratum. Status: For the steppings affected, see the Summary Tables of Changes. AAU73. The Memory Controller May Hang Due to Uncorrectable ECC Errors or Parity Errors Occurring on Both Channels in Mirror Channel Mode Problem: If an uncorrectable ECC or parity error occurs on the mirrored channel before an uncorrectable ECC or parity error on the other channel can be resolved, the Memory Controller may hang without an uncorrectable ECC or parity error being logged. Implication: The processor may hang and not report the error when uncorrectable ECC or parity errors occur in close proximity on both channels in a mirrored channel pair. No uncorrectable ECC or parity error will be logged in the machine check banks. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU74. MSR_TURBO_RATIO_LIMIT MSR May Return Intel® Turbo Boost Technology Core Ratio Multipliers for Non-Existent Core Configurations Problem: MSR_TURBO_RATIO_LIMIT MSR (1ADH) is designed to describe the maximum Intel Turbo Boost Technology potential of the processor. On some processors, a non-zero Intel Turbo Boost Technology value will be returned for non-existent core configurations. Implication: Due to this erratum, software using the MSR_TURBO_RATIO_LIMIT MSR to report Intel Turbo Boost Technology processor capabilities may report erroneous results. Workaround: It is possible for the BIOS to contain a workaround for this erratum. Status: For the steppings affected, see the Summary Tables of Changes. AAU75. Internal Parity Error May Be Incorrectly Signaled during C6 Exit Problem: In a complex set of internal conditions an internal parity error may occur during a Core C6 exit. Implication: Due to this erratum, an uncorrected error may be reported and a machine check exception may be triggered. Workaround: It is possible for the BIOS to contain a workaround for this erratum. Status: For the steppings affected, see the Summary Tables of Changes. September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 41 AAU76. PMIs during Core C6 Transitions May Cause the System to Hang Problem: If a performance monitoring counter overflows and causes a PMI (Performance Monitoring Interrupt) at the same time that the core enters C6, then this may cause the system to hang. Implication: Due to this erratum, the processor may hang when a PMI coincides with core C6 entry. Workaround: It is possible for the BIOS to contain a workaround for this erratum. Status: For the steppings affected, see the Summary Tables of Changes. AAU77. 2MB Page Split Lock Accesses Combined With Complex Internal Events May Cause Unpredictable System Behavior Problem: A 2MB Page Split Lock (a locked access that spans two 2MB large pages) coincident with additional requests that have particular address relationships in combination with a timing sensitive sequence of complex internal conditions may cause unpredictable system behavior. Implication: This erratum may cause unpredictable system behavior. Intel has not observed this erratum with any commercially available software. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU78. If the APIC timer Divide Configuration Register (Offset 03E0H) is written at the same time that the APIC timer Current Count Register (Offset 0390H) reads 1H, it is possible that the APIC timer will deliver two interrupts. Problem: If the APIC timer Divide Configuration Register (Offset 03E0H) is written at the same time that the APIC timer Current Count Register (Offset 0390H) reads 1H, it is possible that the APIC timer will deliver two interrupts. Implication: Due to this erratum, two interrupts may unexpectedly be generated by an APIC timer event. Workaround: Software should reprogram the Divide Configuration Register only when the APIC timer interrupt is disarmed. Status: For the steppings affected, see the Summary Tables of Changes. AAU79. TXT.PUBLIC.KEY is Not Reliable Problem: On Intel® TXT (Intel® Trusted Execution Technology) capable processors, the TXT.PUBLIC.KEY value (Intel TXT registers FED3_0400H to FED3_041FH) is not reliable. Implication: Due to this erratum, the TXT.PUBLIC.KEY value should not be relied on or used for retrieving the hash of the TXT public key for the platform. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 42 September 2015 Document Number: 322911-023US AAU80. 8259 Virtual Wire B Mode Interrupt May Be Dropped When it Collides With Interrupt Acknowledge Cycle From the Preceding Interrupt Problem: If an un-serviced 8259 Virtual Wire B Mode (8259 connected to IOAPIC) External Interrupt is pending in the APIC and a second 8259 Virtual Wire B Mode External Interrupt arrives, the processor may incorrectly drop the second 8259 Virtual Wire B Mode External Interrupt request. This occurs when both the new External Interrupt and Interrupt Acknowledge for the previous External Interrupt arrive at the APIC at the same time. Implication: to this erratum, any further 8259 Virtual Wire B Mode External Interrupts will subsequently be ignored. Workaround: Do not use 8259 Virtual Wire B mode when using the 8259 to deliver interrupts. Status: For the steppings affected, see the Summary Tables of Changes. AAU82. The APIC Timer Current Count Register May Prematurely Read 0x0 While the Timer is Still Running Problem: The APIC Timer Current Counter Register may prematurely read 0x00000000 while the timer is still running. This problem occurs when a core frequency or C-state transition occurs while the APIC timer countdown is in progress. Implication: Due to this erratum, certain software may incorrectly assess that the APIC timer countdown is complete when it is actually still running. This erratum does not affect the delivery of the timer interrupt. Workaround: It is possible for the BIOS to contain a workaround for this erratum. Status: For the steppings affected, see the Summary Tables of Changes. AAU83. Secondary PCIe Port May Not Train After A Warm Reset Problem: In a dual PCIe port configuration, the secondary PCIe port may not train after a warm reset. Implication: The second PCIe port and therefore any device connected to the PCIe bus instantiated by that PCIe port may not be functional after a warm reset. Intel has not observed this erratum with any commercially available system. Workaround: A BIOS code change has been identified and may be implemented as a workaround for this erratum. Status: For the steppings affected, see the Summary Tables of Changes. AAU84. The PECI Bus May Be Tri-stated after System Reset Problem: During power-up, the processor may improperly assert the PECI (Platform Environment Control Interface) pin. This condition is cleared as soon as Bus Clock starts toggling. However, if the PECI host (also referred to as the master or originator) incorrectly determines this asserted state as another PECI host initiating a transaction, it may release control of the bus resulting in a permanent tri-state condition. Implication: Due to this erratum, the PECI host may incorrectly determine that it is not the bus master and consequently PECI commands initiated by the PECI software layer may receive incorrect/invalid responses. Workaround: To workaround this erratum the PECI host should pull the PECI bus low to initiate a PECI transaction. Status: For the steppings affected, see the Summary Tables of Changes. September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 43 AAU85. The Combination of a Page-Split Lock Access And Data Accesses That Are Split Across Cacheline Boundaries May Lead to Processor Livelock Problem: Under certain complex micro-architectural conditions, the simultaneous occurrence of a page-split lock and several data accesses that are split across cacheline boundaries may lead to processor livelock. Implication: Due to this erratum, a livelock may occur that can only be terminated by a processor reset. Intel has not observed this erratum with any commercially available software. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU86. Processor Hangs on Package C6 State Exit Problem: An internal timing condition in the processor power management logic will result in processor hangs upon a Package C6 state exit. Implication: Due to this erratum, the processor will hang during Package C6 state exit. Workaround: It is possible for the BIOS to contain a workaround for this erratum. Status: For the steppings affected, see the Summary Tables of Changes. AAU87. A Synchronous SMI May be Delayed Problem: A synchronous SMI (System Management Interrupt) occurs as a result of an SMI generating I/O Write instruction and should be handled prior to the next instruction executing. Due to this erratum, the processor may not observe the synchronous SMI prior to execution of the next instruction. Implication: Due to this erratum, instructions after the I/O Write instruction, which triggered the SMI, may be allowed to execute before the SMI handler. Delayed delivery of the SMI may make it difficult for an SMI Handler to determine the source of the SMI. Software that relies on the IO_SMI bit in SMM save state or synchronous SMI behavior may not function as expected. Workaround: A BIOS code change has been identified and may be implemented as a workaround for this erratum. Status: For the steppings affected, see the Summary Tables of Changes. AAU88. FP Data Operand Pointer May Be Incorrectly Calculated After an FP Access Which Wraps a 4-Gbyte Boundary in Code That Uses 32-Bit Address Size in 64-bit Mode Problem: The FP (Floating Point) Data Operand Pointer is the effective address of the operand associated with the last non-control FP instruction executed by the processor. If an 80bit FP access (load or store) uses a 32-bit address size in 64-bit mode and the memory access wraps a 4-Gbyte boundary and the FP environment is subsequently saved, the value contained in the FP Data Operand Pointer may be incorrect. Implication: Due to this erratum, the FP Data Operand Pointer may be incorrect. Wrapping an 80-bit FP load around a 4-Gbyte boundary in this way is not a normal programming practice. Intel has not observed this erratum with any commercially available software. Workaround: If the FP Data Operand Pointer is used in a 64-bit operating system which may run code accessing 32-bit addresses, care must be taken to ensure that no 80-bit FP accesses are wrapped around a 4-Gbyte boundary. Status: For the steppings affected, see the Summary Tables of Changes. Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 44 September 2015 Document Number: 322911-023US AAU89. PCI Express x16 Port Links May Fail to Dynamically Switch From 5.0GT/s to 2.5GT/s Problem: If an endpoint device initiates a PCI Express speed change from 5.0 GT/s to 2.5 GT/s, the link may incorrectly go into Recovery.Idle rather than the expected Recovery.Speed state. This may cause the link to lose sync, eventually resulting in a link down. The link will recover and re-train to the L0 state, however any outstanding packets queued during the speed change may be lost. Implication: Due to this erratum, the link may lose sync resulting in link down with queued packet being lost. No known failures have been observed on systems using production PCI Express graphics cards. This erratum has only been observed in a synthetic test environment. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU90. PCI Express Cards May Not Train to x16 Link Width Problem: The Maximum Link Width field in the Link Capabilities register (LCAP; Bus 0; Device 1; Function 0; offset 0xAC; bits [9:4]) may limit the width of the PCI Express link to x8, even though the processor may actually be capable of supporting the full x16 width. Implication: PCI Express x16 Graphics Cards used in normal operation and PCI Express CLB (Compliance Load Board) Cards used during PCI Express Compliance mode testing may only train to x8 link width. Workaround: A BIOS code change has been identified and may be implemented as a workaround for this erratum Status: For the steppings affected, see the Summary Tables of Changes. AAU91. Unexpected Graphics VID Transition During Warm Reset May Cause the System to Hang Problem: During a warm reset to the processor, the graphics VID (Voltage ID) may transition to an unexpected value that may cause the voltage regulator to shut off. Implication: The processor may hang during integrated graphics initialization. Cold boots and platforms using discrete graphics are not affected by this issue. Workaround: A BIOS code change has been identified and may be implemented as a workaround for this erratum. Status: For the steppings affected, see the Summary Tables of Changes. AAU92. IO_SMI Indication in SMRAM State Save Area May Be Lost Problem: The IO_SMI bit (bit 0) in the IO state field at SMRAM offset 7FA4H is set to "1" by the processor to indicate a System Management Interrupt (SMI) is either taken immediately after a successful I/O instruction or is taken after a successful iteration of a REP I/O instruction. Due to this erratum, the setting of the IO_SMI bit may be lost. This may happen under a complex set of internal conditions with Intel® HyperThreading Technology enabled and has not been observed with commercially available software. Implication: Due to this erratum, SMI handlers may not be able to identify the occurrence of I/O SMIs. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 45 AAU93. VM Entry to 64-Bit Mode May Fail if Bits 48 And 47 of Guest RIP Are Different Problem: VM entry to 64-bit mode should allow any value for bits [47:0] of the RIP field in the guest-state area as long as bits 63:48 are identical. Due to this erratum, such a VM entry may fail if bit 47 of the field has a value different from that of bit 48. Implication: It is not possible to perform VM entry to a 64-bit guest that has made a transition to a non-canonical instruction pointer. Workaround: It is possible for the BIOS to contain a workaround for this erratum. Status: For the steppings affected, see the Summary Tables of Changes. AAU94. VM Entry Loading an Unusable SS Might Not Set SS.B to 1 Problem: If the unusable bit (bit 16) is 1 in the guest SS (Stack Segment) access-rights field, VM entry should set the B bit (default stack-pointer size) in the SS (stack segment) register to 1. Due to this erratum, VM entry may instead load SS.B from bit 14 of the guest SS access-rights field, potentially clearing SS.B to 0. Implication: This erratum can affect software only if a far RET instruction is executed after a VM entry that erroneously clears the B bit and only if the following other three conditions are also true: (1) the SS register is not loaded between VM entry and far RET; (2) the far RET instruction is executed in 64-bit mode with an immediate operand; (3) the far RET instruction makes a transition to compatibility mode without changing CPL (Current Privilege Level). Due to the far RET being executed with an immediate operand, an adjustment is made to the stack pointer. Normally, when SS is unusable the SS.B bit is 1 and the adjustment will be to the 32-bit ESP register. Due to this erratum, the adjustment will incorrectly be made to the 16-bit SP register. Intel has not observed this erratum with any commercially available software. Workaround: It is possible for the BIOS to contain a workaround for this erratum. Status: For the steppings affected, see the Summary Tables of Changes. AAU95. FSW May Be Corrupted If an x87 Store Instruction Causes a Page Fault in VMX Non-Root Operation Problem: The X87 FSW (FPU Status Word) may be corrupted if execution of a floating-point store instruction (FST, FSTP, FIST, FISTP, FISTTP) causes a page fault in VMX non-root operation. Implication: This erratum may result in unexpected behavior of software that uses x87 FPU instructions. Workaround: It is possible for the BIOS to contain a workaround for this erratum. Status: None identified. Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 46 September 2015 Document Number: 322911-023US AAU96. Under Certain Low Temperature Conditions, Some Uncore Performance Monitoring Events May Report Incorrect Results Problem: Due to this erratum, under certain low operating temperatures, a small number of Last Level Cache and external bus performance monitoring events in the uncore report incorrect counts. This erratum may affect event codes in the ranges 00H to 0CH and 40H to 43H. Implication: Due to this erratum, the count value for some uncore Performance Monitoring Events may be inaccurate. The degree of under or over counting is dependent on the occurrences of the erratum condition while the counter is active. Intel has not observedthis erratum with any commercially available software. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU97. CKE May go Low Within tRFC(min) After a PD Exit Problem: After a refresh command is issued, followed by an early PD(Power Down) Entry and Exit, the CKE (Clock Enable) signal may be asserted low prior to tRFC(min), the Minimum Refresh Cycle timing. This additional instance of CKE being low causes the processor not to meet the JEDEC DDR3 DRAM specification requirement (Section 4.17.4 Power-Down clarifications - Case 3). Implication: Due to this erratum, the processor may not meet the JEDEC DDR3 DRAM specification requirement that states: “CKE cannot be registered low twice within a tRFC(min) window”. Intel has not observed any functional failure due to this erratum. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU98. Erratum AAU98 added to this specification Update in error; all erratum details removed from the specification update document. AAU99. Performance Monitor Events for Hardware Prefetches Which Miss The L1 Data Cache May be Over-Counted Problem: Hardware prefetches that miss the L1 data cache but cannot be processed immediately due to resource conflicts will count and then retry. This may lead to incorrectly incrementing the L1D_PREFETCH.MISS (event 4EH, umask 02H) event multiple times for a single miss. Implication: The count reported by the L1D_PREFETCH.MISS event may be higher than expected. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 47 AAU100. VM Exit May Incorrectly Clear IA32_PERF_GLOBAL_CTRL [34:32] Problem: If the “load IA32_PERF_GLOBAL_CTRL” VM-exit control is 1, a VM exit should load the IA32_PERF_GLOBAL_CTRL MSR (38FH) from the IA32_PERF_GLOBAL_CTRL field in the guest-state area of the VMCS. Due to this erratum, such a VM exit may instead clear bits 34:32 of the MSR, loading only bits 31:0 from the VMCS. Implication: All fixed-function performance counters will be disabled after an affected VM exit, even if the VM exit should have enabled them based on the IA32_PERF_GLOBAL_CTRL field in the guest-state area of the VMCS. Workaround: A VM monitor that wants the fixed-function performance counters to be enabled after a VM exit may do one of two things: (1) clear the “load IA32_PERF_GLOBAL_CTRL” VMexit control; or (2) include an entry for the IA32_PERF_GLOBAL_CTRL MSR in the VMexit MSR-load list. Status: For the steppings affected, see the Summary Tables of Changes. AAU101. Correctable and Uncorrectable Cache Errors May be Reported Until the First Core C6 Transition Problem: On a subset of processors it is possible that correctable/uncorrectable cache errors may be logged and/or a machine check exception may occur prior to the first core C6 transition. The errors will be logged in IA32_MC5_STATUS MSR (415H) with the MCACOD (Machine Check Architecture Error Code) bits [15:0] indicating a Cache Hierarchy Error of the form 000F 0001 RRRR TTLL. Implication: Due to this erratum, correctable/uncorrectable cache error may be logged or signaled. Workaround: It is possible for the BIOS to contain a workaround for this erratum. Status: For the steppings affected, see the Summary Tables of Changes. AAU102. Accesses to a VMCS May Not Operate Correctly If CR0.CD is Set on Any Logical Processor of a Core Problem: The VMX (virtual-machine extensions) are controlled by the VMCS (virtual-machine control structure). If CR0.CD is set on any logical processor of a core, operations using the VMCS may not function correctly. Such operations include the VMREAD and VMWRITE instructions as well as VM entries and VM exits. Implication: If CR0.CD is set on either logical processor in a core, the VMWRITE instruction may not correctly update the VMCS and the VMREAD instruction may not return correct data. VM entries may not load state properly and may not establish VMX controls properly. VM exits may not save or load state properly. Workaround: VMMs (Virtual-machine monitors) should ensure that CR0.CD is clear on all logical processors of a core before entering VMX operation on any logical processor. Software should not set CR0.CD on a logical processor if any logical processor of the same core is in VMX operation. VMM software should prevent guest software from setting CR0.CD by setting bit 30 in the CR0 guest/host mask field in every VMCS. Status: For the steppings affected, see the Summary Tables of Changes. Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 48 September 2015 Document Number: 322911-023US AAU103. PCIe Port’s LTSSM May Not Transition Properly in the Presence of TS1 or TS2 Ordered Sets That Have Unexpected Symbols Within those Sets Problem: When a PCIe port receives TS1 and/or TS2 ordered sets with unexpected symbols (per the PCIe Base Specification), the port’s LTSSM (Link Training State Machine) might not transition according to the PCIe Base Specification requirements. The LTSSM may incorrectly stay in its current state, or transition to an incorrect state. If the unexpected symbols are sporadic in nature the link will recover and go to the proper state. Implication: PCIe Port’s LTSMM may not transition according to PCIe Base Specification as described above. This problem has not been seen in real system testing, but was discovered by synthetic tests designed to check for illegal conditions. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU104. NTB/RP Link Will Send Extra TS2 Ordered Set During Link Training Problem: The NTB (Non-Transparent Bridge) when operating in NTB/RP (Root Port) mode will send a superfluous TS2 ordered set after transitioning to the CONFIGURATION.IDLE state during link training. This TS2 ordered set may contain invalid capability data. Implication: NTB/RP Link will transmit a TS2 ordered set after transitioning to the CONFIGURATION.IDLE state. No impact expected for specification compliant PCIe partners. Specification compliant PCIe link partners will have transitioned to CONFIGURATION.IDLE before this ordered set is sent and will ignore it. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU105. PCIe Ports May Not Enter Slave Loopback Mode From the Configuration LTSSM State Problem: If a PCIe port’s LTSSM (Link Training State Machine) is in the CONFIG.LINK_WIDTH_START state, it may not enter slave loopback mode when requested to do so by the link partner. If the request is missed the link will continue to train and enter the Slave loopback mode after it first transitions through the L0 and RECOVERY LTSSM states. Implication: Due to this erratum, PCIe ports may be delayed in entering the slave loopback mode. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 49 AAU106. USB Devices May Not Function Properly With Integrated Graphics While Running Targeted Stress Graphics Workloads With NonMatching Memory Configurations Problem: When the integrated graphics engine continuously generates a large stream of writes to system memory, and Intel Flex Memory Technology is enabled, with a different amount of memory in each channel, the memory arbiter may temporarily stop servicing other device-initiated traffic. In some cases this can cause certain USB devices, such as keyboard and mouse, to become unresponsive. Intel has only observed this erratum with targeted stress content. This erratum is not seen when the platform is configured with single channel or dual channel symmetric memory and is not dependent on the memory frequency. Implication: Due to this erratum, certain USB devices may become unresponsive. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU107. VM Entry May Omit Consistency Checks Related to Bit 14 (BS) of the Pending Debug Exception Field in Guest-State Area of the VMCS Problem: Section “Checks on Guest Non-Register State” of Volume 3B specifies consistency checks that VM entry should perform for bit 14 (BS, indicating a pending single-step exception) of the pending debug exception field in guest-state area of the VMCS. These checks enforce the consistency of that bit with other fields in the guest-state area. Due to this erratum, VM entry may fail to perform these checks. Implication: A logical processor may enter VMX non-root operation with a pending single-step debug exception that not consistent other register state; this may result in unexpected behavior. Intel has not observed this erratum with any commercially available software. Workaround: When using VMWRITE to write to a field in the guest-state area, software should ensure that the value written is consistent with the state of other guest-state fields. Status: For the steppings affected, see the Summary Tables of Changes. AAU108. Intel Turbo Boost Technology Ratio Changes May Cause Unpredictable System Behavior Problem: When Intel Turbo Boost Technology is enabled as determined by the TURBO_MODE_DISABLE bit being “0” in the IA32_MISC_ENABLES MSR (1A0H), the process of locking to new ratio may cause the processor to run with incorrect ratio settings. The result of this erratum may be unpredictable system behavior. Implication: Due to this erratum, unpredictable system behavior may be observed. Workaround: It is possible for the BIOS to contain a workaround for this erratum. Status: For the steppings affected, see the Summary Tables of Changes. Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 50 September 2015 Document Number: 322911-023US AAU109. Execution of VMPTRLD May Corrupt Memory If Current-VMCS Pointer is Invalid Problem: If the VMCLEAR instruction is executed with a pointer to the current-VMCS (virtualmachine control structure), the current-VMCS pointer becomes invalid as expected. A subsequent execution of the VMPTRLD (Load Pointer to Virtual-Machine Control Structure) instruction may erroneously overwrite the four bytes at physical address 0000008FH. Implication: Due to this erratum, the four bytes in system memory at physical address 0000008FH may be corrupted. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. AAU110. PerfMon Overflow Status Can Not be Cleared After Certain Conditions Have Occurred Problem: Under very specific timing conditions, if software tries to disable a PerfMon counter through MSR IA32_PERF_GLOBAL_CTRL (0x38F) or through the per-counter eventselect (e.g. MSR 0x186) and the counter reached its overflow state very close to that time, then due to this erratum the overflow status indication in MSR IA32_PERF_GLOBAL_STAT (0x38E) may be left set with no way for software to clear it. Implication: Due to this erratum, software may be unable to clear the PerfMon counter overflow status indication. Workaround: Software may avoid this erratum by clearing the PerfMon counter value prior to disabling it and then clearing the overflow status indication bit. Status: For the steppings affected, see the Summary Tables of Changes. AAU111. Intel® Trusted Execution Technology ACM Revocation Problem: SINIT ACM i5_i7_DUAL_SINIT_18.BIN or earlier are revoked and will not launch with new processor configuration information. Implication: Due to this erratum, SINIT ACM i5_i7_DUAL_SINIT_18.BIN and earlier will be revoked. Workaround: It is possible for the BIOS to contain a workaround for this erratum. All Intel® TXT enabled software must use SINIT ACM i5_i7_DUAL_SINIT_51.BIN or later. Status: For the steppings affected, see the Summary Tables of Changes. AAU112. The Corrected Error Count Overflow Bit in IA32_ MC0_STATUS is Not Updated When the UC Bit is Set Problem: After a UC (uncorrected) error is logged in the IA32_MC0_STATUS MSR (401H), corrected errors will continue to be counted in the lower 14 bits (bits 51:38) of the Corrected Error Count. Due to this erratum, the sticky count overflow bit (bit 52) of the Corrected Error Count will not get updated when the UC bit (bit 61) is set to 1. Implication: The Corrected Error Count Overflow indication will be lost if the overflow occurs after an uncorrectable error has been logged. Workaround: None identified Status: For the steppings affected, see the Summary Tables of Changes. September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 51 AAU113. The Upper 32 Bits of CR3 May be Incorrectly Used With 32-Bit Paging Problem: When 32-bit paging is in use, the processor should use a page directory located at the 32-bit physical address specified in bits 31:12 of CR3; the upper 32 bits of CR3 should be ignored. Due to this erratum, the processor will use a page directory located at the 64-bit physical address specified in bits 63:12 of CR3. Implication: The processor may use an unexpected page directory or, if EPT (Extended Page Tables) is in use, cause an unexpected EPT violation. This erratum applies only if software enters 64-bit mode, loads CR3 with a 64-bit value, and then returns to 32-bit paging without changing CR3. Intel has not observed this erratum with any commercially available software. Workaround: Software that has executed in 64-bit mode should reload CR3 with a 32-bit value before returning to 32-bit paging. Status: For the steppings affected, see the Summary Tables of Changes. AAU114. EPT Violations May Report Bits 11:0 of Guest Linear Address Incorrectly Problem: If a memory access to a linear address requires the processor to update an accessed or dirty flag in a paging-structure entry and if that update causes an EPT violation, the processor should store the linear address into the "guest linear address" field in the VMCS. Due to this erratum, the processor may store an incorrect value into bits 11:0 of this field. (The processor correctly stores the guest-physical address of the pagingstructure entry into the "guest-physical address" field in the VMCS.) Implication: Software may not be easily able to determine the page offset of the original memory access that caused the EPT violation. Intel has not observed this erratum to impact the operation of any commercially available software. Workaround: Software requiring the page offset of the original memory access address can derive it by simulating the effective address computation of the instruction that caused the EPT violation. Status: For the steppings affected, see the Summary Tables of Changes. AAU115. IA32_VMX_VMCS_ENUM MSR (48AH) Does Not Properly Report The Highest Index Value Used For VMCS Encoding Problem: IA32_VMX_VMCS_ENUM MSR (48AH) bits 9:1 report the highest index value used for any VMCS encoding. Due to this erratum, the value 21 is returned in bits 9:1 although there is a VMCS field whose encoding uses the index value 23. Implication: Software that uses the value reported in IA32_VMX_VMCS_ENUM[9:1] to read and write all VMCS fields may omit one field. Workaround: None identified. Status: For the steppings affected, see the Summary Tables of Changes. Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 52 September 2015 Document Number: 322911-023US AAU116. Virtual-APIC Page Accesses With 32-Bit PAE Paging May Cause a System Crash Problem: If a logical processor has EPT (Extended Page Tables) enabled, is using 32-bit PAE paging, and accesses the virtual-APIC page then a complex sequence of internal processor micro-architectural events may cause an incorrect address translation or machine check on either logical processor. Implication: This erratum may result in unexpected faults, an uncorrectable TLB error logged in IA32_MCi_STATUS.MCACOD (bits [15:0]) with a value of 0000_0000_0001_xxxxb (where x stands for 0 or 1), a guest or hypervisor crash, or other unpredictable system behavior. Workaround: It is possible for the BIOS to contain a workaround for this erratum. Problem: For the steppings affected, see the Summary Tables of Changes. AAU117. An IRET Instruction That Results in a Task Switch Does Not Serialize the Processor Problem: An IRET instruction that results in a task switch by returning from a nested task does not serialize the processor (contrary to the Software Developer’s Manual Vol. 3 section titled "Serializing Instructions"). Implication: Software which depends on the serialization property of IRET during task switching may not behave as expected. Intel has not observed this erratum to impact the operation of any commercially available software. Workaround: None identified. Software can execute an MFENCE instruction immediately prior to the IRET instruction if serialization is needed. Status: For the stepping affected, see the Summary Tables of Changes. September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 53 Specification Changes The Specification Changes listed in this section apply to the following documents: • Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium® Processor G6950 Datasheet - Volumes 1 and 2 • Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 1: Basic Architecture • Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 2A: Instruction Set Reference Manual A-M • Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 2B: Instruction Set Reference Manual N-Z • Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 3A: System Programming Guide • Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 3B: System Programming Guide There are no new Specification Changes in this Specification Update revision. Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 54 September 2015 Document Number: 322911-023US Specification Clarifications The Specification Clarifications listed in this section may apply to the following documents: • Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium® Processor G6950 Datasheet - Volumes 1 and 2 • Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 1: Basic Architecture • Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 2A: Instruction Set Reference Manual A-M • Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 2B: Instruction Set Reference Manual N-Z • Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 3A: System Programming Guide • Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 3B: System Programming Guide There are no new Specification Changes in this Specification Update revision. September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 55 Documentation Changes The Documentation Changes listed in this section apply to the following documents: • Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium® Processor G6950 Datasheet - Volumes 1 and 2 • Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 1: Basic Architecture • Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 2A: Instruction Set Reference Manual A-M • Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 2B: Instruction Set Reference Manual N-Z • Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 3A: System Programming Guide • Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 3B: System Programming Guide All Documentation Changes will be incorporated into a future version of the appropriate Processor documentation. Note: Documentation changes for Intel® 64 and IA-32 Architecture Software Developer's Manual volumes 1, 2A, 2B, 3A, and 3B will be posted in a separate document, Intel® 64 and IA-32 Architecture Software Developer's Manual Documentation Changes. Follow the link below to become familiar with this file. http://www.intel.com/content/www/us/en/processors/architectures-softwaredeveloper-manuals.html There are no new Documentation Changes in this Specification Update revision. Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 56 September 2015 Document Number: 322911-023US §§ September 2015 Document Number: 322911-023US Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 57 Intel® Core™ i5-600, i3-500 Desktop Processor Series and Intel® Pentium Desktop Processor 6000 Series Specification Update 58 September 2015 Document Number: 322911-023US
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : Intel Corporation Create Date : 2015:09:21 09:45:09Z Keywords : 3080, 322911, intel core processors, core i5-600, core i3-500, intel pentium processors, pentium 6000, desktop Modify Date : 2015:09:29 00:38:01+05:30 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Creator Tool : FrameMaker 12.0.4 Metadata Date : 2015:09:29 00:38:01+05:30 Format : application/pdf Title : Intel® Core™ and Intel® Pentium® Desktop Processor Series: Specification Update Creator : Intel Corporation Subject : 3080, 322911, intel core processors, core i5-600, core i3-500, intel pentium processors, pentium 6000, desktop Producer : Acrobat Distiller 11.0 (Windows) Document ID : uuid:7fa58423-557f-45de-8829-be2b993f7e77 Instance ID : uuid:9dd960f5-bbf8-4967-bf9f-ade97fdfe14c Page Mode : UseOutlines Page Count : 58EXIF Metadata provided by EXIF.tools