Page View / The Manual D3350

• DL350 PLC User Manual
• Warning
• Manual History
• Table of Contents
  • Chapter 1: Getting Started
  • Chapter 2: Installation, Wiring, and Specifications
  • Chapter 3: CPU Specifications and Operations
  • Chapter 4: System Design and Configuration
  • Chapter 5: Standard RLL Instructions
  • Chapter 6: Drum Instruction Programming
  • Chapter 7: RLLPLUS Stage Programming
  • Chapter 8: PID Loop Operation
  • Chapter 9: Maintenance and Troubleshooting
  • Appendix A: Auxiliary Functions
  • Appendix B: Error Codes
  • Appendix C: Instruction Execution Times
  • Appendix D: Special Relays
  • Appendix E: DL305 Product Weights
  • Appendix F: I/O Addressing Conventional Method
  • Appendix G: PLC Memory
  • Appendix H: ASCII Table
  • Appendix I: Numbering Systems
  • Appendix J: European Union Directives (CE)
  • Index
• Chapter 1: Getting Started
  • Introduction
  • Conventions Used
  • DL305 System Components
  • Programming Methods
  • DL305 Family
  • DirectLOGIC Part Numbering System
  • Quick Start for PLC Validation and Programming
  • Steps to Designing a Successful System
• Chapter 2: Installation, Wiring, and Specifications
  • Safety Guidelines
  • Mounting Guidelines
  • Installing DL305 Bases
  • Installing Components in the Base
  • Base Wiring Guidelines
  • I/O Wiring Strategies
  • I/O Modules Position, Wiring, and Specification
  • Glossary of Specification Terms
  • D3--08ND2, 24 VDC Input Module
  • D3--16ND2--1, 24 VDC Input Module
  • F3-16ND3F, TTL/24 VDC Fast Response Input Module
  • D3-08NA-1, 110 VAC Input Module
  • D3-08NE3, 24 VAC/DC Input Module
  • D3-16NE3, 24 VAC/DC Input Module
  • D3-08SIM, Input Simulator
  • D3-08TD1, 24 VDC Output Module
  • D3-08TD2, 24 VDC Output Module
  • D3-16TD1-1, 24 VDC Output Module
  • D3-16TD1-2, 24 VDC Output Module
  • D3-16TD2, 24 VDC Output Module
  • D3-04TAS, 110-220 VAC Output Module
  • F3-08TAS, 250 VAC Isolated Output Module
  • F3-08TAS-1, 125 VAC Isolated Output Module
  • D3-08TA-1, 110--220 VAC Output Module
  • D3-08TA--2, 110-220 VAC Output Module
  • F3-16TA-2, 20-125 VAC Output Module
  • D3-16TA--2, 15-220 VAC Output Module
  • D3-08TR, Relay Output Module
  • F3-08TRS-1, Relay Output Module
  • F3-08TRS-2, Relay Output Module
  • D3-16TR, Relay Output Module
• Chapter 3: CPU Specifications and Operations
  • Overview
  • CPU Hardware Features
  • Using Battery Backup
  • CPU Setup
  • I/O Response Time
  • CPU Scan Time Considerations
  • PLC Numbering Systems
  • Memory Map
  • DL350 System V-memory
  • DL350 Aliases
  • X Input / Y Output Bit Map
  • Control Relay Bit Map
  • Staget Control / Status Bit Map
  • Timer and Counter Status Bit Maps
• Chapter 4: System Design and Configuration
  • DL305 System Design Strategies
  • Module Placement
  • Calculating the Power Budget
  • Local I/O Expansion
  • Setting the Base Switches
  • I/O Configurations with a 5 Slot Local CPU Base
  • I/O Configurations with an 8 Slot Local CPU Base
  • I/O Configurations with a 10 Slot Local CPU Base
  • Remote I/O Expansion
  • Network Connections to MODBUS and DirectNET
  • Network Slave Operation
  • Network Master Operation
• Chapter 5: Standard RLLInstructions
  • Introduction
  • Using Boolean Instructions
  • Boolean Instructions
  • Comparative Boolean
  • Immediate Instructions
  • Timer, Counter and Shift Register Instructions
  • Accumulator / Stack Load and Output Data Instructions
  • Accumulator Logical Instructions
  • Math Instructions
  • Bit Operation Instructions
  • Number Conversion Instructions (Accumulator)
  • Table Instructions
  • Clock / Calendar Instructions
  • CPU Control Instructions
  • Program Control Instructions
  • Interrupt Instructions
  • Intelligent I/O Instructions
  • Network Instructions
  • Message Instructions
• Chapter 6: Drum Instruction Programming
  • Introduction
  • Step Transitions
  • Overview of Drum Operation
  • Drum Control Techniques
  • Drum Instructions
• Chapter 7: RLLPLUS Stage Programming
  • Introduction to Stage Programming
  • Learning to Draw State Transition Diagrams
  • Using the Stage Jump Instruction for State Transitions
  • Stage Program Example: Toggle On/Off Lamp Controller
  • Four Steps to Writing a Stage Program
  • Stage Program Example: A Garage Door Opener
  • Stage Program Design Considerations
  • Parallel Processing Concepts
  • Managing Large Programs
  • RLLPLUS Instructions
  • Questions and Answers about Stage Programming
• Chapter 8: PID Loop Operation
  • DL350 PID Loop Features
  • Introduction to PID Control
  • Introducing DL350 PID Control
  • PID Loop Operation
  • Ten Steps to Successful Process Control
  • PID Loop Setup
  • PID Loop Tuning
  • Using Other PID Features
  • Ramp/Soak Generator
  • DirectSOFT Ramp/Soak Example
  • Cascade Control
  • Time-Proportioning Control
  • Feedforward Control
  • PID Example Program
  • Troubleshooting Tips
  • Glossary of PID Loop Terminology
  • Bibliography
• Chapter 9: Maintenance and Troubleshooting
  • Hardware Maintenance
  • Diagnostics
  • CPU Indicators
  • PWR Indicator
  • RUN Indicator
  • CPU Indicator
  • BATT Indicator
  • Communications Problems
  • I/O Module Troubleshooting
  • Noise Troubleshooting
  • Machine Startup and Program Troubleshooting
• Appendix A: Auxiliary Functions
  • Introduction
  • AUX 2* — RLL Operations
  • AUX 3* — V-memory Operations
  • AUX 4* — I/O Configuration
  • AUX 5* — CPU Configuration
  • AUX 6* — Handheld Programmer Configuration
  • AUX 7* — EEPROM Operations
  • AUX 8* — Password Operations
• Appendix B: Error Codes
  • Error Code Table
• Appendix C: Instruction Execution Times
  • Introduction
  • Boolean Instructions
  • Comparative Boolean
  • Immediate Instructions
  • Timer, Counter, Shift Register Instructions
  • Accumulator Data Instructions
  • Logical Instructions
  • Math Instructions
  • Bit Instructions
  • Number Conversion Instructions
  • Table Instructions
  • CPU Control Instructions
  • Program Control Instructions
  • Interrupt Instructions
  • Network Instructions
  • Message Instructions
  • RLLPLUS Instructions
  • Clock / Calendar Instructions
  • Drum Instructions
• Appendix D: Special Relays
  • DL350 CPU Special Relays
• Appendix E: DL305 Product Weights
  • Product Weight Table
• Appendix F: I/O Addressing Conventional Method
  • Understanding Conventional I/O Numbering
  • Conventional Base Specifications
  • Local or Expansion I/O Systems
  • Setting the Base Switches
  • Example I/O Configurations
  • I/O Configurations with a 5 Slot Local CPU Base
  • I/O Configurations with an 8 Slot Local CPU Base
  • I/O Configurations with a 10 Slot Local CPU Base
• Appendix G: PLC Memory
  • DL350 PLC Memory
• Appendix H: ASCII Table
  • ASCII Conversion Table
• Appendix I: Numbering Systems
  • Introduction
  • Binary Numbering System
  • Hexadecimal Numbering System
  • Octal Numbering System
  • Binary Coded Decimal (BCD) Numbering System
  • Real (Floating Point) Numbering System
  • BCD/Binary/Decimal/Hex/Octal - What is the Difference?
  • Data Type Mismatch
  • Signed vs. Unsigned Intergers
  • AutomationDirect.com Products and Data Types
• Appendix J: European Union Directives (CE)
  • European Union (EU) Directives
  • Basic EMC Installation Guidelines
• Index