B&C Speakers HF Drivers DE1000
User Manual: HF Drivers DE1000
Open the PDF directly: View PDF 
.
Page Count: 2
280 W continuous program power capacity
1.5" horn throat diameter
100 mm (4 in) aluminium voice coil
Titanium diaphragm
500 - 20000 Hz response
109 dB sensitivity
Neodymium magnet assembly with shorting
copper cap
DE1000
HF Drivers - 1.5 Inches
8Ω
B&C Speakers s.p.a.
Via Poggiomoro, 1 - Loc. Vallina, 50012 Bagno a Ripoli (FI) - ITALY - Tel. +39 055 65721 - Fax +39 055 6572312 - mail@bcspeakers.com
DE1000
HF Drivers- 1.5 Inc hes
38 mm (1.5 in)
8 Ω
8.1 Ω
140 W
280 W
109.0 dB
1.0 - 20.0 kHz
1.0 kHz
100 mm (4.0 in)
Aluminium
0.18 mH
Titanium
1.95 T
Neodymium Ring
SPECIFICATIONS1
Throat Diameter
Nominal Impedance
Minimum Impedance
Nominal Power Handling2
Continuous Power Handling3
Sensitivity4
Frequency Range
Recommended Crossover5
Voice Coil Diameter
Winding Material
Inductance
Diaphragm Material
Flux Density
Magnet Material
154 mm (6.1 in)
60 mm (2.4 in)
3.4 kg (7.5 lb)
1
3.6 kg (7.94 lb)
190x190x100 mm (7.48x7.48x3.94 in)
MOUNTING AND SHIPPING INFO
Four M6 holes 90° on 102 mm (4 in) diameter
Overall Diameter
Depth
Net Weight
Shipping Units
Shipping Weight
Shipping Box
MMD4ATN8M
REPLACEMENT DIAPHRAGM
1. Driver mounted on B&C ME 90 horn.
2. 2 hour test made with continuous pink noise signal within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated
nominal impedance.
3. Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4. Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
5. 12 dB/oct. or higher slope high-pass filter.
B&C Speakers s.p.a.
Via Poggiomoro, 1 - Loc. Vallina, 50012 Bagno a Ripoli (FI) - ITALY - Tel. +39 055 65721 - Fax +39 055 6572312 - mail@bcspeakers.com
