Epson Stylus Pro 7600, 9600 Service Manual. Www.s Manuals.com. Manual
User Manual: Large-Format Printer Epson Stylus Pro 9600 - Service manuals and Schematics, Disassembly / Assembly. Free.
Open the PDF directly: View PDF
Page Count: 326 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- EPSON Stylus Pro 7600/9600
- Contents
- Product Description
- 1.1 Product Description
- 1.2 Basic Specifications
- 1.3 External View and Parts Names
- 1.4 Operating Panel
- 1.4.1 Buttons and Functions
- 1.4.2 Indications on the Panel
- 1.4.3 SelecType
- 1.4.3.1 Outline
- 1.4.3.2 Panel Setting Menu Item
- 1.4.3.3 PG Setting
- 1.4.3.4 Page Lines
- 1.4.3.5 Interface Select
- 1.4.3.6 Code Page Switching
- 1.4.3.7 Roll Paper Margin
- 1.4.3.8 Detect Paper Width
- 1.4.3.9 Detect Skew Error
- 1.4.3.10 Job Timeout Setting
- 1.4.3.11 No margin print setting
- 1.4.3.12 Cutter position adjustment
- 1.4.3.13 Auto margin refresh
- 1.4.3.14 Panel Setup Value Initialization
- 1.4.3.15 Nozzle Check Pattern Printing
- 1.4.3.16 Status Printing
- 1.4.3.17 Job Information Print
- 1.4.3.18 Firmware version
- 1.4.3.19 Printable pages of each ink cartridge
- 1.4.3.20 Ink remaining
- 1.4.3.21 Maintenance tank count
- 1.4.3.22 Use counter
- 1.4.3.23 Clear use counter
- 1.4.3.24 Job history display
- 1.4.3.25 Job history clear
- 1.4.3.26 Total prints
- 1.4.3.27 Consumables life
- 1.4.3.28 Suction adjustment for paper setting and indicator display
- 1.4.3.29 Ink remaining indicator display
- 1.4.3.30 Job information
- 1.4.3.31 User Paper Setting
- 1.4.3.32 Power cleaning
- 1.4.3.33 Cutter Blade Replacement
- 1.4.3.34 Gap Adjustment (Bi-D Adjustment, Uni-D Adjustment)
- 1.4.3.35 BK ink cartridge replacement
- 1.4.4 Maintenance Mode 1
- 1.4.5 Maintenance Mode 2
- 1.4.6 Paper feeding adjustment conversion table
- 1.4.7 Firmware Reload
- 1.4.8 Function to prevent irregular printing
- 1.4.9 Initialization
- 1.4.10 Default Setup Values
- 1.5 Controller
- 1.6 Interfaces
- 1.7 Optional Units and Consumables
- Operating Principles
- Troubleshooting
- 3.1 Outline
- 3.2 Error Display
- 3.2.1 Errors
- 3.2.2 Errors
- 3.2.2.1 Paper End/End of roll
- 3.2.2.2 Wrong paper source is selected on panel
- 3.2.2.3 Paper set lever is released during operation
- 3.2.2.4 Paper set lever is released
- 3.2.2.5 Paper Jam
- 3.2.2.6 Front Cover Open
- 3.2.2.7 Type-B I/F error
- 3.2.2.8 Paper cutting error
- 3.2.2.9 Paper Not Straight
- 3.2.2.10 Paper check error/Paper eject error (sheet)
- 3.2.2.11 Paper is too thick for cleaning
- 3.2.2.12 Not enough ink for cleaning
- 3.2.2.13 Ink-related Errors
- 3.2.2.14 Defective ink cartridge
- 3.2.2.15 Ink lever released
- 3.2.2.16 Illegal ink cartridge
- 3.2.2.17 Maintenance tank full
- 3.2.2.18 No Maintenance tank
- 3.2.2.19 Wrong IK designation
- 3.2.2.20 Fatal Error
- 3.2.3 Troubleshooting for Warning
- 3.2.4 Troubleshooting for Service Call Errors
- 3.2.4.1 CR motor life (00000101)
- 3.2.4.2 PF motor encoder check error (00010000)
- 3.2.4.3 PF Motor out of step (00010001)
- 3.2.4.4 PF motor overcurrent (00010002)
- 3.2.4.5 PF motor in-position time out (00010003)
- 3.2.4.6 CR motor encoder check error (00010004)
- 3.2.4.7 CR motor out of step (00010005)
- 3.2.4.8 CR motor overcurrent (00010006)
- 3.2.4.9 CR motor in-position time-out (00010007)
- 3.2.4.10 Servo interrupt watchdog time-out (00010008)
- 3.2.4.11 System interrupt watchdog time-out (00010009)
- 3.2.4.12 CR home position sensor error (0001000A)
- 3.2.4.13 PF home position sensor error (0001000B)
- 3.2.4.14 Head slide (PG) home position sensor error (0001000C)
- 3.2.4.15 CR motor PWM output faulty (0001000F)
- 3.2.4.16 PF motor PWM output faulty (00010010)
- 3.2.4.17 Head driver (TG) temperature error (0001001B)
- 3.2.4.18 CR servo parameter error (0001001D)
- 3.2.4.19 PF servo parameter error (0001001E)
- 3.2.4.20 CSIC reed/right error (00010020)
- 3.2.4.21 Ink type error (setting on printer body side) (00010022)
- 3.2.4.22 RTC analysis error (00010023)
- 3.2.4.23 CSIC ROM communication error (00010025)
- 3.2.4.24 RTC communication error (00010026)
- 3.2.4.25 Head error (00010028)
- 3.2.4.26 Unidentified NMI (00010029)
- 3.2.4.27 CR ASIC ECU error (0001002A)
- 3.2.4.28 PF ASIC ECU error (0001002B)
- 3.2.4.29 NVRAM error (00020000)
- 3.2.4.30 SDRAM error (00020002)
- 3.2.4.31 BOOT program SUM error (00020003)
- 3.2.4.32 NVRAM error (00020004 / 00020005)
- 3.2.4.33 Flash memory SUM error (00020009)
- 3.2.4.34 Program load error (0002000A)
- 3.2.4.35 Internal memory shortage error (0002000B)
- 3.2.4.36 Review error (0002000C)
- 3.2.4.37 CPU address error (load misalignment) (100000E0)
- 3.2.4.38 CPU address error (storage misalignment) (10000100)
- 3.2.4.39 CPU reserve command code exception error (10000180)
- 3.2.4.40 CPU slot illegal command exception error (100001A0)
- 3.2.4.41 CPU DMA address error (100005C0)
- 3.2.4.42 CPU error (10000xxx)
- 3.3 Troubleshooting Based on Your Printout
- Disassembly & Assembly
- 4.1 Summary
- 4.2 Removing the Panel Unit and Housing
- 4.3 Disassembly and Assembly of Carriage (CR) Mechanism
- 4.4 Disassembly and Assembly of Paper Feed Mechanism
- 4.5 Disassembly and Assembly of Ink Supply Mechanism
- 4.6 Disassembly and Assembly of Cleaning Mechanism
- 4.7 Disassembly and Assembly of Circuit Boards
- Adjustment
- 5.1 Overview
- 5.1.1 Cautions
- 5.1.2 Adjustment Tools
- 5.1.3 Procedure for Adjustment Work
- 5.1.4 Adjustment Items
- 5.1.4.1 Print Head Adjustment
- 5.1.4.2 Main Board Adjustment
- 5.1.4.3 CR Motor Adjustment
- 5.1.4.4 PF Motor Adjustment
- 5.1.4.5 P_EDGE Sensor ASSY Adjustment
- 5.1.4.6 P_REAR Sensor ASSY Adjustment
- 5.1.4.7 P_THICK/P_THICK_0.3 Sensor ASSY Adjustment
- 5.1.4.8 CR Encoder Sensor ASSY Adjustment
- 5.1.4.9 Cover Sensor ASSY Adjustment
- 5.1.4.10 PF Encoder Sensor ASSY Adjustment
- 5.1.4.11 Cutter Solenoid ASSY or Paper Guide L Adjustment
- 5.1.4.12 Damper ASSY Adjustment
- 5.1.4.13 Release Sensor (I/H Lever) Adjustment
- 5.1.4.14 Battery
- 5.1.5 Parameter Backup
- 5.1.6 Firmware Reinstallation
- 5.2 Self-diagnostic Function
- 5.2.1 Overview
- 5.2.2 Test
- 5.2.3 Adjustment
- 5.2.3.1 Rear AD Adjustment
- 5.2.3.2 Edge AD Adjustment
- 5.2.3.3 Input Rank
- 5.2.3.4 Write D/A Value
- 5.2.3.5 Check Nozzle
- 5.2.3.6 Check Skew
- 5.2.3.7 Feed Correction + T&B Adjustment
- 5.2.3.8 Top & Bottom Adjustment
- 5.2.3.9 Rear Sensor Position
- 5.2.3.10 Platen Position (Sponge Position) Adjustment
- 5.2.3.11 Platen Position Checking
- 5.2.3.12 Head Slant Adjustment
- 5.2.3.13 Bi-D Alignment Adjustment
- 5.2.3.14 Parameter Copying
- 5.2.3.15 Bi-D2 Adjustment (PG=0.7mm)
- 5.2.3.16 Bi-D3 Adjustment (PG=2.1mm)
- 5.2.3.17 Bi-D Alignment Checking
- 5.2.3.18 Head Gap Adjustment (Uni-D Adjustment)
- 5.2.3.19 Test Pattern Printing
- 5.2.3.20 Clean Head
- 5.2.3.21 Counter Clear
- 5.2.4 Cleaning
- 5.2.5 Print
- 5.2.6 Parameter
- 5.3 Mechanism Adjustment
- 5.3.1 Overview
- 5.3.2 CR Timing Belt Tension Adjustment
- 5.3.3 PF Timing Belt Tension Adjustment
- 5.3.4 P_THICK_0.3/P_THICK Sensor Mounting Plate Position Adjustment
- 5.3.5 Cover Sensor ASSY Mounting Position Adjustment
- 5.3.6 CR Encoder Sensor Mounting Position Adjustment
- 5.3.7 Cutter Positioning Adjustment
- 5.3.8 PF Encoder Sensor Installation Position Adjustment
- 5.3.9 USB ID Writing
- 5.1 Overview
- Maintenance
- Appendix