MAN 652 130 Raptor 130H 220V Owner's Manual Man652 &file=man652
User Manual: man652-130
Open the PDF directly: View PDF .
Page Count: 22
Download | |
Open PDF In Browser | View PDF |
Raptor 130H Carpet And Upholstery Cleaner Model No.: 100-652-130 11 gal Extractor Operator and Parts Manual CLEANMASTER TH 11015 47 AVENUE WEST MUKILTEO WA 98275 U.S.A. FAX: 1-800-426-4225 WEBSITE: www.cleanmaster.com CUSTOMER SERVICE: 1-425-775-7276 MNL36408-E3H-220V Rev. 00 (07-01) OPERATION This manual is furnished with each new model. It provides necessary operation and maintenance instructions and an illustrated parts list. MACHINE DATA Read this manual completely and understand the machine before operating or servicing it. Use the illustrated Parts Lists to order parts. Before ordering parts or supplies, be sure to have your machine model number and serial number handy. Parts and supplies may be ordered by phone or mail from any authorized parts and service center, distributor or directly from Cleanmaster. Please fill out at time of installation for future reference. Model No.- _______________________________________ Install. Date- ______________________________________ Serial No.- ________________________________________ © Cleanmaster Printed in U.S.A. Cleanmaster is a registered United States trademark This machine will provide excellent service. However, the best results will be obtained at minimum costs if: • The machine is operated with reasonable care. • The machine is maintained regularly – per the maintenance instructions provided. • The machine is maintained with manufacturer supplied or equivalent parts. TABLE OF CONTENTS SAFETY PRECAUTIONS .............................. 3 MACHINE COMPONENTS ............................ 4 MACHINE SETUP......................................... 4 MACHINE OPERATION ................................ 5 DRAINING TANKS........................................ 6 FREEZE PROTECTION ................................ 6 MACHINE MAINTENANCE ........................... 7 STORING MACHINE..................................... 7 RECOMMENDED STOCK ITEMS .................. 7 TROUBLE SHOOTING.................................. 8 SPECIFICATIONS ........................................ 9 ELECTRICAL DIAGRAM .............................. 10 PARTS LIST ................................................. 11 OPTIONS ..................................................... 16 WARRANTY POLICY.................................... 18 2 36408-E3H-Raptor-220V (07-01) OPERATION SAFETY PRECAUTIONS This machine is intended for commercial use. It is designed to wet clean carpet and upholstery in a indoor environment and is not constructed for any other use. Use only recommended cleaning solutions and accessory tools. All operators must read, understand and practice the following safety precautions. 4. Before leaving or servicing machine: – Turn off machine. – Unplug cord from wall outlet. 5. When servicing machine: – Unplug cord from wall outlet. – Avoid moving parts. Do not wear loose jackets, shirts, or sleeves. – Use manufacturer supplied or approved replacement parts. The following safety-alert symbols are used throughout this manual as indicated in their description: WARNING: Hazardous Voltage. Shock or electrocution can result. Always unplug machine before servicing. WARNING: To warn of hazards or unsafe practices which could result in severe personal injury or death. WARNING: Flammable materials can cause an explosion or fire. Do not use flammable materials in tank(s). FOR SAFETY: To identify actions which must be followed for safe operation of equipment. The following information signals potentially dangerous conditions to the operator or equipment. FOR SAFETY: 1. Do not operate machine: – Unless trained and authorized. – Unless operator manual is read and understood. – In flammable or explosive areas. – With damaged cord or plug. – If not in proper operating condition. – Unless cord is properly grounded. – In outdoor areas. – In standing water. – With the use of an extension cord. 2. Before operating machine: – Make sure all safety devices are in place and operate properly. 3. When using machine: – Do not run machine over cord. – Do not pull machine by plug or cord. – Do not pull cord around sharp edges or corners. – Do not unplug by pulling on cord. – Do not stretch cord. – Do not handle plugs with wet hands. – Keep cord away from heated surfaces. – Report machine damage or faulty operation immediately. – Follow mixing and handling instructions on chemical containers. – Connect hoses before turning on pump. – Be sure chemicals are safe and non-toxic. 36408-E3H-Raptor-220V (07-01) WARNING: Flammable materials or reactive metals can cause an explosion or fire. Do not pick up. WARNING: Hot solutions up to 88° C (190°F). Do not touch with any part of the body. Use thermometer to gauge temperature. WARNING: Contents of solution hoses may be under pressure even after pump is off. GROUNDING INSTRUCTIONS Machine must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electrical current to reduce the risk of electrical shock. This machine is equipped with a cord having an equipmentgrounding connector and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed in accordance with all local codes and ordinances. Do not remove ground pin; if missing, replace plug before use. International models will have different cord ends. GROUNDED OUTLET (3 HOLE) GROUNDING PIN 3 OPERATION MACHINE COMPONENTS 4 11 3 8 6 5 7 2 1 12 10 9 14 1. 2. 3. 4. 5. 6. 7. 13 Recovery Tank Solution Tank Recovery Tank Lid Solution Tank Lid Vacuum Switch Pump Switch Inline Heater Switch 8. 9. 10. 11. 12. 13. 14. Immersion Heater / Clean Switch Power Cord Connector Empty-Out Nozzle Vacuum Hose Connector Latches Recovery Tank Drain Solution Hose Connector MACHINE SETUP 1. Carefully check carton for signs of damage. Report damages at once to carrier. The machine is shipped fully assembled and is ready for use. WARNING: Flammable materials can cause an explosion or fire. Do not use flammable materials in tank(s). 4. Add a recommended cleaning chemical. FOR SAFETY: When using machine, follow mixing and handling instructions on chemical containers. Fig. 1 2. Connect hoses and tool to be used (Figure1). 3. Using a clean bucket or hose, fill solution tank with 41 liters (11 gallons) of hot water, 60° C (140° F) maximum (Figure 2). Fig. 2 4 36408-E3H-Raptor-220V (07-01) OPERATION ATTENTION: If using powdered cleaning chemicals, mix prior to adding. NOTE: If desired, water alone achieves excellent cleaning results. 2. Take carpet cleaning wand in hand and squeeze valve trigger while moving the tool in short forward and backward strokes. (Figure 6). 5. Plug machine’s power cord into grounded wall outlet. (Figure 3). GROUNDED OUTLET (3 hole) GROUNDING PIN Fig. 6 Fig. 3 FOR SAFETY: Do not operate machine unless cord is properly grounded. FOR SAFETY: Do not operate machine with the use of an extension cord. 6. Secure recovery tank lid in place. MACHINE OPERATION FOR SAFETY: Do not operate machine unless operator manual is read and understood. WHILE OPERATING 1. Overlap each path by 50 mm (2 in). Warning: Flammable materials or reactive metals can cause an explosion or fire. Do not pick up. 2. Periodically check for excessive foam buildup in recovery tank. Use a recommended foam control solution to prevent vacuum motor damage. ATTENTION: Excessive foam buildup will not activate the float shut-off screen. PRE-OPERATION AND HEATING 3. To clean heavily soiled areas, repeat cleaning path from a different direction. 1. Vacuum carpet and remove other debris with standard vacuum. 4. Empty recovery tank every time water is added to solution tank. 2. Inspect power cord for damage. 3. Turn on immersion heater to preheat solution in tank. (Figure 4). CLEANING WITH ACCESSORY TOOLS 1. Connect accessory tool hoses to the couplers at the end of the hoses already attached to the machine. (Figure 7). CLEANING CARPETS 1. Turn immersion heater to “clean” position and activate vacuum, pump, and heater switches. (Figure 5). Fig. 4 36408-E3H-Raptor-220V (07-01) Fig. 5 Fig. 7 5 OPERATION 2. Operate accessory tool as normal (Figure 8). NOTE: Before cleaning upholstery, always check cleaning instructions sewn in furniture by manufacturer. Fig. 8 Fig. 8 3. After cleaning, relieve water pressure from tool before disconnecting hose. Squeeze trigger for five seconds after turning switches off. DRAINING TANKS DRAINING SOLUTION TANK 1. Remove empty-out nozzle from its storage bracket (Figure 10) and attach to end of solution hose. Fig. 10 2. Place empty-out nozzle over a bucket and turn on pump until all the solution has been pumped from solution tank. 3. Replace empty-out nozzle to its storage location. FREEZE PROTECTION DRAINING RECOVERY TANK 1. Turn machine off. 2. Insert supplied 45° elbow in drain valve. Place a bucket below it and slowly pull up on the handle (Figure 9). 1. After draining solution tank as described in steps one and two in the previous section (DRAINING SOLUTION TANK), place empty-out nozzle in end of vacuum hose and seal with hand (Figure 11). Fig. 11 Fig. 9 3. Rinse tank with clean water at the end of the day. 6 2. Turn on vacuum and pump for 15 seconds. This will fill the pump and hoses with air and prevent freezing. 3. Replace empty-out nozzle to its storage place. 36408-E3H-Raptor-220V (07-01) OPERATION MACHINE MAINTENANCE To keep machine in good working condition, simply follow machine’s daily, weekly and monthly maintenance procedures. FOR SAFETY: When servicing machine, unplug cord from wall outlet. DAILY MAINTENANCE (Every 4 Hours of Operation) 1. Empty and rinse out recovery tank thoroughly. 2. Remove float shut-off screen from recovery tank and clean (Figure 12.) MONTHLY MAINTENANCE (Every 80 Hours of Operation) 1. Lubricate wheels with water resistant oil. 2. Inspect machine for water leaks and loose hardware. QUARTERLY MAINTENANCE (Every 250 hours of Operation) Check vacuum motor for carbon brush wear. Replace motor if worn to a length of 10mm (0.38”) or less. STORING MACHINE 1. Before storing machine, be certain to drain and rinse tanks of all water. 2. Store machine in a dry area in the upright position. 3. Open recovery tank lid to promote air circulation. ATTENTION: Do not expose to rain. Store indoors. FIG. 12 3. When solution tank is empty, remove and clean solution filter screen located in the bottom of the solution tank. 4. Wipe off power cord and check for damage, replace if necessary. Coil cord neatly after use. 5. Clean machine with an all purpose cleaner and damp cloth. WEEKLY MAINTENANCE (Every 20 Hours of Operation) 1. Inspect vacuum hoses for holes and loose cuffs. 2. Inspect spray pattern for plugging. If plugged, remove spray tips and soak them in acetic acid solution for up to six hours. Do not use pointed objects to unplug tips, damage will occur. ATTENTION: If storing machine in freezing temperatures, be sure that machine and solution system are completely drained and dry. RECOMMENDED STOCK ITEMS Refer to Parts List section for recommended stock items. Stock items are clearly identified with a bullet preceding the parts description. See example below: PART # DESCRIPTION J-30. LID, DOME QTY. 1 • J-38GRANITE TOP,SOL TANK ROTO GRANITE 1 J-39.5GRANITE HANDLE,WASTE TANK ROTO GRANI 1 J-39GRANITE WASTE TANK, ROTO GRANITE 1 FOR SAFETY: When using machine, follow mixing and handling instructions on chemical containers. 3. Inspect cord and cord grip for damage. Replace immediately if damaged. 4. Lubricate metal shaft on recovery tank drain with water resistant oil. 5. Lubricate female hose couplers with lightweight oil. 36408-E3H-Raptor-220V (07-01) 7 OPERATION TROUBLE SHOOTING PROBLEM CAUSE SOLUTION Machine does not operate. Faulty switches or wiring. Contact Service Center. Faulty power cord. Contact Service Center. Building circuit breaker tripped. Reset Breaker. Faulty switch or wiring. Contact service center. Solution pump does not operate. Faulty switch or wiring. Contact Service Center. Heater does not heat. Vacuum motor does not operate. Poor solution pick-up. Uneven or no spray. 8 Faulty solution pump motor. Contact Service Center. Faulty pump head. Contact Service Center. Trigger on wand not pulled. Pull Solution Trigger. Quick couplers not fully engaged. Connect quick couplers. Loose or broken wiring. Contact Service Center. Faulty vacuum switch. Contact Service Center. Defective vacuum motor. Contact Service Center. Worn carbon brushes. Contact Service Center. Recovery tank drain valve open. Close valve. Defective recovery tank lid gasket. Replace gasket. Clogged float shut-off screen. Remove recovery tank lid and clean screen. Loose vacuum hose connections. Secure cuffs to hose. Defective vacuum hose. Replace hose. Plugged spray tips. Clean or replace tips. Improper spray tip size or spray angle. Replace with proper tips. Worn spray tips. Replace spray tips. Solution tank low or empty. Refill solution tank. Faulty solution pump. Contact Service Center. 36408-E3H-Raptor-220V (07-01) OPERATION SPECIFICATIONS Model 130H – 220V LENGTH 711 mm (28 in) WIDTH 450 mm (17.7 in) HEIGHT 1016 mm (40 in) WEIGHT 55 Kg (121.5lbs) SOLUTION TANK CAPACITY 41 L (11 gal) RECOVERY TANK CAPACITY 38L (10 gal) SOLUTION PUMP 240 V, 6.8 bar (100psi), .55 A VACUUM MOTOR – 3 STAGE 240 V, 5.3 A, 1272 W IMMERSION HEATER 240 V, 7.3 A, 1750 W INLINE HEATER 240 V, 4.2 A, 1000 W SEALED WATER LIFT 2946 mm (116 in) TOTAL POWER CONSUMPTION PREHEAT 220V, 7.8A,1750W; CLEAN 10A, 2200 W POWER CORDS 1 @ 7.6m (25 ft) 3/12 DECIBEL RATING 3 METERS (10 FT) FROM MACHINE ON CARPET <74 db(A) MACHINE DIMENSIONS 1016 mm (40 in) 711 mm (28 in) 36408-E3H-Raptor-220V (07-01) 902 mm (35.5 in) 450 mm (17.7 in) 9 ELECTRICAL DIAGRAM RAPTOR 130H-220V 220 V WIRING DIAGRAM 10 36408-E3H-Raptor-220V (07-01) PARTS LIST RAPTOR 130H-220V TANK GROUP 36408-E3H-Raptor-220V (07-01) 11 PARTS LIST RAPTOR 130H-220V TANK GROUP PART # DESCRIPTION PART # DESCRIPTION B-17.2 8-32 X 1/2 PHXSS 4 J-49GRNGRNT LID, ROTO GREEN GRANITE 1 B-21 10-32 X 5/16 PHXSS 6 J-57.5 SPACER,ROTO 3"OD X 2.4"ID 1 B-23 10-32 X 1/2 PHXSS 1 K-09.1 CORD,25' 12/3SJT UG W/LCK 1 B-23.7 10-32 X 5/8 PHXSS 1 K-12.17 HEATER,1750W 220V TUBULAR 9.8X6.48 1 B-26.7 10-32 X 1 1/2 PHXZINC 2 K-16.96 BUSHING,RELIEF 1/2 NPT 1 B-28.01 NUT 10-32 HEX ZINC 3 K-16.97 NUT,NYLON BUSHING REL.1/2 1 B-28.03 NUT 10-32 NYLOK ZINC 2 • K-21.7W SWITCH, DPDT WATER RESIS 1 B-32.6 1/4-20 X 3/4 PHXFLTHD SS 6 • K-21W SWITCH, SPST WATER RESIS 3 B-33.05 1/4-20 X 1 HEX HD SS 2 • K-26.9 THERMOSTAT,MANUAL RESET SPST 210 1 B-36.02 NUT 1/4-20 NYLOK SS 8 K-28.05 TIE, WIRE NYLON #10 SCREW 1 B-38.6 WASHER, 1/4 FLAT SS 4 M-0791.03 BRACKET,SF-09 HOLDER 1 B-40.91 3/8-16 X 1 1/2 HEX ZINC 2 M-0791.05 BRACKET,DUMP VAL MNT 1 B-40.95 3/8-16 X 3 1/2 HEX ZINC 1 M-0792.1 PLATE,HANDLE SW COVR 1 B-40.96 3/8-16 X 4 HEX ZINC 1 M-0881 BRACKET,THEMOSTAT MOUNT SS TANK EDG 1 B-41.5 WASHER, 3/8 FLAT ZINC 3 M-18.2 HINDGE, SOLUTION LID 8.125" 1 B-43 NUT 1/2-20 HEX JAM ZINC 2 M-93 WASHER, .219 X .625 18GA 2 B-48 NUT, 1/4" BULK HD 3/4-16 2 N-30.105 PNL,SW P/C PVH 1 C-01.25 BUSHING,HOLDER EMPTY-OUT 1 SC-05.025E3 ELBOW,PVC LID ASSM 1 C-03.02 CLAMP, HOSE 1/4" #4 1 SC-35.5 HOSE BARB, ABS 1 1/2 CUT 1 C-03.13 CLAMP, HOSE 1 3/4 #20 2 SE-10.05/31 HOSE, VAC 1.5" FLEX 31" 1 C-03.2 CLAMP, HOSE 2" #24 1 SE-10.6/20 HOSE, VAC 1 1/2 GREY 20' 1 C-03.3 CLAMP, HOSE 2 1/4 #32 2 SE-10.6/20A HOSE,VAC 1 1/2X20 W/1.5 CUFFS 1 • C-05.05 FILTER, 1/4NPT 50MESH 1 SE-12/2.25 HOSE,2" VINYL X 2.25" 1 • C-07.6 GASKET,LID FLD WATER RMVL&EDGE3 1 SF-09 NOZZEL, EMPTY OUT MALE 1 C-11.9 LATCH, SOFT DRAW BLACK 2 • SG-16 VALVE,DUMP 1.5 W/PVC EXT 1 C-13.5 PLUG, HOLE NYLON .562 3 SJ-41SOLFLT/GRN-G-01 1 SOL TANK,E2/3 FLATBOT GRNGNT DRILD 1 C-26 FLOAT,VAC SHUT OFF ROTO 1 SJ-41VACE3/GRNGNT-01 1 VAC TANK,E3 GREEN GRANITE DRILLED 1 C-35.5 HOSE BARB,1 1/2XMPT W/FLA 1 SJ-42CM.2 HNDL, CM BLACK 4 SWITCH RAPTOR 1 C-57 FLAT WASHER 1.75 ID X 2.75 1 SJ-43.75 COMP,VAC FLTR NECK ASSM 1 D-01.8OR BULK HEAD, 1/4" BRASS W/O-RING 1 SJ-49.5GRNGRNT LID COMPLETE GREEN GRANITE 1 D-20.01 ELBOW 90 1/4NPT X -4 SAE 1 SK-09.8 CORD,PIG TAIL COMP. 1 D-41 NIPPLE, 1/4 NPT CLOSE BR 1 SK-26.8 THRMST,SWTCH ACTN SPST W/PUSHON ENDS 1 E-14.65 CUFF, 1 1/2 SLIP X 1 1/2 HOSE 2 SK-85E/HNDL HARNESS, HNDL C1P/CPVH 1 G-03.19 O-RING,VITON 2-020 BLKHD 1 SM-0880 TANK, SOL SS FAB W/STUDS 1 J-48CLNMSTR LID, SOLUTION GRNGRANITE CM 1 • 12 QTY. RECOMMENDED STOCK ITEMS 36408-E3H-Raptor-220V (07-01) QTY. PARTS LIST RAPTOR 130H-220V BASE GROUP 36408-E3H-Raptor-220V (07-01) 13 PARTS LIST RAPTOR 130H-220V BASE GROUP PART # DESCRIPTION PART # DESCRIPTION B-09.1 6-32 X 3/8 PHXSS 4 F-09 Q/C 1/4" PLUG BR SHUT OFF 1 B-10 6-32 X 1/2 PHXSS 8 F-11 Q/C 1/4" SOC BR SHUT OFF 2 B-14 NUT 6-32 HEX SS 8 J-45.5BLK PMP MNT,CE SILNCE BLCK ED 1 B-16.2 8-32 X 3/8 PHXSS 4 K-17.4 CLAMP,NYLON CABLE 1/4" 2 B-17.6 8-32 X 3/4PHX ZINC 4 K-17.5 CLAMPS, NYLON CABLE 3/8 2 B-18.02 NUT 8-32 NYLOK, ZINC 4 K-25.82 THERMOSTAT, 190 SPST 1 B-21 10-32 X 5/16 PHXSS 5 K-25.83 THERMOSTAT, 230 SPST 1 B-22 10-32 X 7/16 PHXSS 2 M-0563.6 PLATE,PUMP MOUNT SHURFLO 150PSI 1 B-23.17 10 X 1/2 SELF TAP HEX 1 M-0790.5 AXIL, ROD 1/2 ECONO 1 B-23.7 10-32 X 5/8 PHXSS 4 M-0791 AXIL, ROD 1/2 1 B-28.01 NUT 10-32 HEX ZINC 4 M-0791.3 PIVOT, TUBE 3.400" 2 B-31.5 1/4-20 X 1/2 HEX CP 4 M-0792.02 PLATE,VAC MNT 1 VAC QUIET 1 B-32 1/4-20 X 3/4 HEX HD CP 12 M-0792.3 PLATE,HTR MNT 1 B-33.4 1/4-20 X 3 3/4 HEX CP 3 M-0792.4 PLATE,ASM HTR COVER 4 THERMO 1 B-36.01 NUT 1/4-20 NYLOK ZINK 11 M-0792.6 PLATE, MANIFOLD COVER 1 B-38.5 WASHER, 1/4 FLAT CP 14 M-31.175 STANDOFF, 5.7 3.190" 3 B-42 WASHER 9/16 x 1 1/4 FLAT 6 M-72 SPACER, QUICK CONNECT 1 C-02.3 CASTER 3 1/2" 2 SC-51 FOAM, SILENCE MUFFLER 1 C-03.3 CLAMP, HOSE 2 1/4 #32 2 C-04.1 COTTER, HAIRPIN 7/16-9/16 2 • C-06 GASKET, BLOWER/ARLON 1/4" 1 C-07.3 GASKET,VAC SEAL BASE 1 C-23.8 WHEEL 10" - 1/2"BORE 2 C-59 PUSHNUT FASTNER, 1/2 CAP 2 C-95 VELCRO, ONE WRAP STRAP 1/2" X 12" 1 D-04 BUSHING 3/8 X 1/4 NPT BR. 1 D-07.015 COUP 1/4FPT X -4SAE 1 D-07.02 COUP 1/4 NPT X -6 SAE 1 D-17 90 ST ELBOW 1/4" NPT 1 D-20.015 ELBOW 90 1/4NPT X -6 SAE 1 D-44.08 NIPPLE, 3/8 CLOSE BRASS 1 D-48.2 TEE,3/8 NPT BRASS 1 D-48.5 TEE,STREET 1/4 NPT BRASS 1 D-93.4 VALVE,PRESSURE REL 1/4 SS 1 E-14 CUFF, 1 1/2 SLIP X 1 1/4 HOSE 1 • 14 QTY. QTY. SE-06.7/11 HOSE, 1/4 SOL 11" 1/4MPTX-6SAE 1 SE-06.7/16.5 HOSE,1/4BLUE 16.5" 3/8MPTX-4SAE 1 SE-06.7/45 HOSE,1/4BLUE 45" 3/8MPTX-4SAE 1 SE-06.7GRY/20 HOSE, 1/4"SOL GRY 20' W/QC'S 1 SE-06.7GRY/20A HOSE, 1/4"SOL GRY 20' 1/4MPTX1/4MPT 1 SE-06.9/20 HOSE, -6SAE X 1/4NPT 20 1 SE-12.5/6 HOSE, 2" FLEX EXH 6" 1 SJ-02.3 EXCHG, CASTING COMP 1 SJ-40BLK102200210 BASE,BLK DRLD 1 VAC QT 1 SJ-45BLKCOV COVER,HTR 1 • SK-12.4 HTR, CRT 1000W 240V COM 1 SK-50.14/3.5 WIRE,BLACK 14GA W/.25FASTONS 3/5" 1 SK-85E/BASE HARNESS, BASE C1P/CPVH 1 • SL-008.5 BLOWER,3STG 240 5.7W/PLUG 1 • SL-22.6 PMP,SHFL 100PSI STD 220V W/PLUG 1 SM-0277.5 EXCH,HT 240V 1000W 1 SR-08/6 INSULATION,HTR 1 RECOMMENDED STOCK ITEMS 36408-E3H-Raptor-220V (07-01) 36408-E3H-Raptor-220V (07-01) 15 PARTS LIST PUMP 100 PSI BREAKDOWN SL-22.6 SL-22.65 L-22.6 PART # DESCRIPTION QTY. SL-22.6 • PUMP,SHFL 100 PSI STD 240V W/PLUG 1 L-22.6 • PUMP HEAD 100PSI COMPLETE ASSY 1 • MOTOR, 100PSI STD 220V W/PLUG 1 SL-22.65 • RECOMMENDED STOCK ITEMS 16 36408-E3H-Raptor-220V (07-01) OPTIONS 20258 ECONO FLOOR TOOL PART # DESCRIPTION QTY. PART # DESCRIPTION QTY. B-24.1 10-32 X 3/4 PHXZINC 1 • B-26.57 10-32 X 1 3/8 PHX ZINC 1 G-23 B-28.03 NUT, 10-32 NYLOK ZINK 2 • B-40.15 5/16-18 X 3/4 HEX CP 2 M-16.5 B-40.33 NUT 5/16-18 NYLOCK, ZINC 2 C-07.9 GRIP, FLRTOOL 1 1/2 X 6 1 D-15.2 45 ST ELBOW 1/4 NPT 1 SC-82 TRIGGER,COMP KNGSTN VALVE 1 D-41 NIPPLE, 1/4 NPT CLOSE BR 1 SE-06.7/47 HOSE,1/4 SOL 47"FLRTL ECO 1 Q/C 1/4" PLUG BR SHUT OFF 1 VALVE, KNGSTN STD S BND 1 JET, 11006 E VEE BRASS 1 HOE HANDLE,ECONO FLRTL 1 M-16.5A "U"CLAMP,SUPP HOE HNDL EC 1 M-19.5 WAND,FLOORTOOL COMP. ECONO 1 F-09 H-37 • RECOMMENDED STOCK ITEMS 36408-E3H-Raptor-220V (07-01) 17 OPTIONS LP/20208; HP/20216 FLOOR TOOL PART # DESCRIPTION QTY. PART # DESCRIPTION B-24.1 QTY. 10-32 X 3/4 PHXZINC 1 G-23.5 VALVE,KNSTN HP "S" BEND 1 B-26.57 10-32 X 1 3/8 PHX ZINC 1 H-02.5 BODY, TEE JET 1/4 BRASS 2 B-28.03 NUT, 10-32 NYLOK ZINK 2 H-03 CAP NUT, TEE JET BRASS 2 B-40.15 5/16-18 X 3/4 HEX CP 2 • H-18.5 JET,11003 TEE BRASS 2 B-40.33 NUT 5/16-18 NYLOCK, ZINC 2 • H-18.7 JET,110015 E TEE BRASS 2 C-07.9 GRIP, FLRTOOL 1 1/2 X 6 1 M-16.5 HOE HANDLE,ECONO FLRTL 1 D-15.2 45 ST ELBOW 1/4 NPT 1 M-16.5A "U"CLAMP,SUPP HOE HNDL EC 1 D-41 NIPPLE, 1/4 NPT CLOSE BR 1 M-20 WAND,"S"BND FLTL COM W/HD 1 • F-09 Q/C 1/4" PLUG BR SHUT OFF 1 SC-82 TRIGGER,COMP KNGSTN VALVE 1 G-23 VALVE,KNGSTN STD "S" BEND 1 SE-06.7/39.2 HOSE,1/4"SOL BLU X39.25DB 1 • RECOMMENDED STOCK ITEMS 18 36408-E3H-Raptor-220V (07-01) OPTIONS 20078A HAND TOOL PART # Description PART # Description B-05.5 4-40 X 7/8 PHXZINC 1 GR-2-006N70 O-RING,2-006 BUNA 70DR 2 B-07.5 NUT, 4-40 HEX ZINC NYLOK 1 GR-2-011N70 O-RING,2-011 BUNA 70DR 1 B-11.5 6-32 X 1 PHXZINC 2 GR-2-013N70 O-RING,2-013 BUNA 70DR 1 B-14.6 NUT, 6-32 HEX ZINC NYLOK 2 H-03.5 CAP NUT,TEE JET POLYPRO 1 B-16.2 8-32 X 3/8 PHXSS 1 H-18.8 JET, 110015 STD FLAT SPRYTIP PLSTIC 1 B-18.01 NUT 8-32 NYLOK, SS 1 J-62 VALVE, 4" DETAIL TOOL AS MOLDED 1 C-05.07 FILTER, 4" DETAIL TOOL 50 MESH 1 J-63 TRIGGER, 4" DETAIL TOOL 1 C-08.5 GROMMET, CLEAR DETAIL T OOL 1 J-64 ELBOW, 4" DETAIL TOOL 1 D-02 BUSHING 1/4 X 1/8 NPT BR 1 M10.5A COUPLER, 1.5" VAC HOSE ALUM 1 E-13.5 CUFF,EXTRN HOSE 1 1/2SLPX1 1/4HOSE 1 SE-02/16.5A HOSE, 1/8 BLK 16.5" ASM W/EXTRN CUFF 1 E-14 CUFF, 1 1/2SLIP X 1 1/4HOSE 1 SE-10/12 HOSE, VAC 1 1/4 GREY/BLACK 12" LONG 1 F-09 Q/C 1/4" PLUG BR SHUT OFF 1 SG-04.5 STEM ASM 4"TOOL BUNA W/BRASS CAP 1 G-04.5 GUIDE, VALVE STEM HEX BRASS 1 SJ-60 HANDLE ASM, 4" DETAIL TOOL 1 G-05.5 STEM, VALVE SS 4" DETAIL TOOL 1 SJ-62 VALVE,NYLON COMPLETE STD 4"DETAIL 1 G-08.5 SPRING, VALVE 4" UPH TOOL 1 36408-E3H-Raptor-220V (07-01) QTY. QTY. 19 WARRANTY POLICY PARTS ONLY – STANDARD REPLACEMENT POLICY For the first 12 months from the date of original purchase, in the event that a part believed to be under warranty fails, simply call Cleanmaster to obtain a Return Authorization, ship the part freight prepaid to Cleanmaster and, Cleanmaster will either repair or replace the part at no charge if it is determined that failure was a manufacturing defect. Cleanmaster will then ship the repaired or replaced part back to you freight collect. Our service department can usually talk a person through any part replacement procedure in a matter of minutes HOW TO OBTAIN A RETURN AUTHORIZATION Prior to shipping any part, assembly or machine to Cleanmaster a Return Authorization Number must be requested from Cleanmaster and displayed prominently on the outside of all packages containing parts or machines for warranty consideration to be processed and in effect. A Return Authorization can be obtained by calling Cleanmaster Service Department at 1-425-775-7276. The machine and/or part serial number must be communicated to Cleanmaster Customer Service to receive a Return Authorization Number. Any machine, part or assembly must be returned with its original serial number as affixed by Cleanmaster for warranty consideration to be in effect. All returns will be sent to Cleanmaster at 11015 47th Avenue West, Mukilteo Wa. 98275. Fax communications can be sent to 1-800-426-4225 and emails sent to cleanmail@cleanmaster.com. 20 36408-E3H-Raptor-220V (07-01) WARRANTY Cleanmaster Inc. warrants the Raptor Cleaning Machine against defects in material and workmanship under normal use and service. Cleanmaster, hereby, extends a limited three-year warranty on the polyethylene machine housing of the Raptor against cracking or leaking and a one-year warranty on the rest of the machine against manufacturing defect or workmanship subject to the terms and conditions that follow. TERMS AND CONDITIONS The warranty obligation extends only to the repair or replacement of parts, assemblies or machine housing found upon examination by Cleanmaster to be defective in manufacturing or workmanship, and Cleanmaster reserves the right to make that determination. Any adjustment or replacement of defective parts made under this warranty does not void the warranty; neither does it extend the original warranty beyond its term. Repair or replacements of any machine component(s) with any part(s) other than genuine Cleanmaster parts will immediately void this and all warranties. Filters, brass fittings, seals, o-rings and quick disconnects are considered expendable in normal use and are not covered by this warranty. Dry cleaning solvents cannot be used in the Raptor. This warranty shall not cover any Raptor machine housing, part or assembly if there is evidence of misuse, alteration, owner neglect, lack of proper maintenance, improper chemical use, improper voltage, abuse, accident, freezing, flood, fire, etc. and any and all circumstances beyond Cleanmaster’s control. In no event shall Cleanmaster be liable for loss of use, incidental or consequential damages or any damages to persons or property. 11015 47th AVENUE WEST, MUKILTEO WA 98275 USA Phone 800-426-8972, 425-775-7272; Fax 800-426-4225; Email cleanmail@cleanmaster.com PLEASE RETURN REGISTRATION WITHIN 10 DAYS OF RECEIVING YOUR RAPTOR CLEANING MACHINE. KEEP THIS COPY FOR YOUR RECORDS Date Received WARRANTY REGISTRATION Registered Owner(s) Address Phone Number Fax Number Email Address Machine Serial Number Purchased From (Distributor) 36408-E3H-Raptor-220V (07-01) 21 WARRANTY Cleanmaster Inc. warrants the Raptor Cleaning Machine against defects in material and workmanship under normal use and service. Cleanmaster, hereby, extends a limited three-year warranty on the polyethylene machine housing of the Raptor against cracking or leaking and a one-year warranty on the rest of the machine against manufacturing defect or workmanship subject to the terms and conditions that follow. TERMS AND CONDITIONS The warranty obligation extends only to the repair or replacement of parts, assemblies or machine housing found upon examination by Cleanmaster to be defective in manufacturing or workmanship, and Cleanmaster reserves the right to make that determination. Any adjustment or replacement of defective parts made under this warranty does not void the warranty; neither does it extend the original warranty beyond its term. Repair or replacements of any machine component(s) with any part(s) other than genuine Cleanmaster parts will immediately void this and all warranties. Filters, brass fittings, seals, o-rings and quick disconnects are considered expendable in normal use and are not covered by this warranty. Dry cleaning solvents cannot be used in the Raptor. This warranty shall not cover any Raptor machine housing, part or assembly if there is evidence of misuse, alteration, owner neglect, lack of proper maintenance, improper chemical use, improper voltage, abuse, accident, freezing, flood, fire, etc. and any and all circumstances beyond Cleanmaster’s control. In no event shall Cleanmaster be liable for loss of use, incidental or consequential damages or any damages to persons or property. 11015 47th AVENUE WEST, MUKILTEO WA 98275 USA Phone 800-426-8972, 425-775-7272; Fax 800-426-4225; Email cleanmail@cleanmaster.com PLEASE RETURN REGISTRATION WITHIN 10 DAYS OF RECEIVING YOUR RAPTOR CLEANING MACHINE. RETURN THIS COPY Date Received WARRANTY REGISTRATION Registered Owner(s) Address Phone Number Fax Number Email Address Machine Serial Number Purchased From (Distributor) 22 36408-E3H-Raptor-220V (07-01)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Create Date : 2002:03:05 22:31:38Z Subject : MAN-652-130 - Raptor 130H 220V Modify Date : 2005:04:21 12:00:58-07:00 Page Count : 22 Creation Date : 2002:03:05 22:31:38Z Author : CleanMaster Producer : Acrobat PDFWriter 4.05 for Windows NT Mod Date : 2005:04:21 12:00:58-07:00 Metadata Date : 2005:04:21 12:00:58-07:00 Title : MAN-652-130 - Raptor 130H 220V - Owner's Manual Creator : CleanMaster Description : MAN-652-130 - Raptor 130H 220VEXIF Metadata provided by EXIF.tools