Fwd_master_new 060915 Fwd
User Manual: fwd
Open the PDF directly: View PDF 
.
Page Count: 10
| Download | |
| Open PDF In Browser | View PDF |
QUICK REFERENCE INDEX Edition: July 2008 A GENERAL INFORMATION Revision:July 2008 Publication No. SM9E-1L32U0 B ENGINE C HYBRID D TRANSMISSION & DRIVELINE E SUSPENSION F BRAKES G STEERING H RESTRAINTS I VENTILATION, HEATER & AIR CONDITIONER J BODY INTERIOR K BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY L DRIVER CONTROLS All rights reserved. No part of this Service Manual may be reproduced or stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photo-copying, recording or otherwise, without the prior written permission of Nissan North America, Inc. M ELECTRICAL & POWER CONTROL N DRIVER INFORMATION & MULTIMEDIA O CRUISE CONTROL P MAINTENANCE GI EM LU CO EC FL EX STR ACC HBC HBB HBR CL TM DLN FAX RAX FSU RSU SCS WT BR PB BRC ST STC SB SBC SR SRC VTL HA HAC INT IP SE ADP DLK SEC GW PWC RF EXT BRM MIR EXL INL WW DEF HRN PWO BCS LAN PCS CHG PG MWI WCS SN AV CCS MA General Information Engine Mechanical Engine Lubrication System Engine Cooling System Engine Control System Fuel System Exhaust System Starting System Accelerator Control System Hybrid Control System Hybrid Battery System Hybrid Brake System Clutch Transaxle & Transmission Driveline Front Axle Rear Axle Front Suspension Rear Suspension Suspension Control System Road Wheels & Tires Brake System Parking Brake System Brake Control System Steering System Steering Control System Seat Belt Seat Belt Control System SRS Airbag SRS Airbag Control System Ventilation System Heater & Air Conditioning System Heater & Air Conditioning Control System Interior Instrument Panel Seat Automatic Drive Positioner Door & Lock Security Control System Glass & Window System Power Window Control System Roof Exterior Body Repair Manual Mirrors Exterior Lighting System Interior Lighting System Wiper & Washer Defogger Horn Power Outlet Body Control System LAN System Power Control System Charging System Power Supply, Ground & Circuit Elements Meter, Warning Lamp & Indicator Warning Chime System Sonar System Audio, Visual & Navigation System Cruise Control System Maintenance A B C D E F G H I J K L M N O P FOREWORD This manual contains maintenance and repair procedure for the 2009 NISSAN ALTIMA. In order to assure your safety and the efficient functioning of the vehicle, this manual should be read thoroughly. It is especially important that the PRECAUTIONS in the GI section be completely understood before starting any repair task. All information in this manual is based on the latest product information at the time of publication. The right is reserved to make changes in specifications and methods at any time without notice. IMPORTANT SAFETY NOTICE The proper performance of service is essential for both the safety of the technician and the efficient functioning of the vehicle. The service methods in this Service Manual are described in such a manner that the service may be performed safely and accurately. Service varies with the procedures used, the skills of the technician and the tools and parts available. Accordingly, anyone using service procedures, tools or parts which are not specifically recommended by NISSAN must first be completely satisfied that neither personal safety nor the vehicle’s safety will be jeopardized by the service method selected. PLEASE HELP MAKE THIS SERVICE MANUAL BETTER! Your comments are important to NISSAN and will help us to improve our Service Manuals. Use this form to report any issues or comments you may have regarding our Service Manuals. Please print this form and type or write your comments below. Mail or fax to: Nissan North America, Inc. Technical Service Information 39001 Sunrise Drive, P.O. Box 9200 Farmington Hills, MI USA 48331 FAX: (248) 488-3910 SERVICE MANUAL: Model: Year: PUBLICATION NO. (Refer to Quick Reference Index ): Please describe any Service Manual issues or problems in detail: Note: Please include a copy of each page, marked with your comments. Page number(s) Are the trouble diagnosis procedures logical and easy to use? (circle your answer) YES NO Note: Please include a copy of each page, marked with your comments. If no, what page number(s)? Please describe the issue or problem in detail: Is the organization of the manual clear and easy to follow? (circle your answer) YES NO Please comment: What information should be included in NISSAN Service Manuals to better support you in servicing or repairing customer vehicles? DATE: DEALER: CITY: YOUR NAME: DEALER NO.: STATE/PROV./COUNTRY: POSITION: ADDRESS: ZIP/POSTAL CODE: QUICK REFERENCE CHART: ALTIMA 2009 QUICK REFERENCE CHART: ALTIMA Engine Tune-up Data: QR25DE INFOID:0000000001881075 GENERAL SPECIFICATIONS Cylinder arrangement 3 In-line 4 3 2,488 (151.82) Displacement cm (in ) Bore and stroke mm. (in) 89.0 x 100 (3.50 x 3.94) Valve arrangement DOHC Firing order 1-3-4-2 Number of piston rings Compression 2 Oil 1 Compression ratio 9.5:1 Standard 1,250 (12.8, 181.3) Compression pressure Minimum 1,060 (10.8, 153.7) kPa (kg/cm2, psi) / 250 rpm Differential limit between cylinders 100 (1.0, 14) Valve timing PBIC0187E Unit: degree a b c d e f 220° 232° -12° 64° 10° 30° SPARK PLUG Unit: mm. (in) Make NGK Type Standard Gap (nominal) DILKAR6A-11 1.1 (0.043) Engine Tune-up Data: VQ35DE INFOID:0000000001881076 GENERAL SPECIFICATIONS Cylinder arrangement 3 V-6 3 Displacement cm (in ) Bore and stroke mm (in) Valve arrangement Firing order 3,498 (213.45) 95.5 x 81.4 (3.76 x 3.205) DOHC 1-2-3-4-5-6 QUICK REFERENCE CHART: ALTIMA Number of piston rings 2009 Compression 2 Oil 1 Number of main bearings 4 Compression ratio 10.3:1 Compression pressure kPa (kg/cm2, psi)/300 rpm Standard 1,275 (13.0, 185) Minimum 981 (10.0, 142) Differential limit between cylinders 98 (1.0, 14) Cylinder number SEM713A Valve timing (IVTC - OFF) PBIC0187E Unit: degree a b c d e f 240° 240° - 10° 70° 10° 50° SPARK PLUG Make DENSO Type FXE20HR11 Gap (nominal) 1.1 mm (0.043 in) Front Wheel Alignment (Unladen*) INFOID:0000000003301441 SEDAN Market Engine type Tire size USA/Canada Mexico QR25DE and VQ35DE QR25DE and VQ35DE 215/60R16 215/55R17 215/60R16 215/55R17 QUICK REFERENCE CHART: ALTIMA Camber Degree minute (Decimal degree) LH RH Minimum -1°15′ (-1.25°) -1°09′ (-1.15°) Nominal -0°30′ (-0.50°) -0°24′ (-0.40°) Maximum 0°15′ (0.25°) 0°21′ (0.35°) Minimum -1°30′ (-1.50°) -1°24′ (-1.40°) Nominal -0°45′ (-0.75°) -0°39′ (-0.65°) 0°00′ (0.00°) -0°06′ (-0.10°) Maximum Leftand right difference Caster Degree minute (Decimal degree) -0°15′ ± 0° 33′ (-0.25°± 0.55°) Minimum 4°15′ (4.25°) 3°57′ (3.95°) Nominal 5°00′ (5.00°) 4°42′ (4.70°) Maximum 5°45′ (5.75°) 5°27′ (5.45°) Left and right difference Kingpin offset Degree minute (Decimal degree) Total toe-in Distance (A - B) 2009 0° 33′ (0.55°) Minimum 12°00′ (12.00°) 11°50′ (11.83°) Nominal 12°45′ (12.75°) 12°35′ (12.58°) Maximum 13°30′ (13.50°) 13°20′ (13.33°) Minimum 0 mm (0 in) Nominal 1 mm (0.05 in) Maximum 2 mm (0.10 in) : Fuel, radiator coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions. COUPE Market Engine type Tire size Camber Degree minute (Decimal degree) USA/Canada Mexico QR25DE and VQ35DE VQ35DE 215/60R16 LH RH -1°15′ (-1.25°) -1°09′ (-1.15°) Nominal -0°30′ (-0.50°) -0°24′ (-0.40°) Maximum 0°15′ (0.25°) 0°21′ (0.35°) Minimum -1°30′ (-1.50°) -1°24′ (-1.40°) Nominal -0°45′ (-0.75°) -0°39′ (-0.65°) 0°00′ (0.00°) -0°06′ (-0.10°) Left and right difference Total toe-in Distance (A - B) (-0.25° ± 0.55°) Minimum 4°15′ (4.25°) 3°57′ (3.95°) Nominal 5°00′ (5.00°) 4°42′ (4.70°) Maximum 5°45′ (5.75°) 5°27′ (5.45°) Left and right difference Kingpin offset Degree minute (Decimal degree) 215/55R17 Minimum Maximum Caster Degree minute (Decimal degree) 215/55R17 33′ (0.55°) Minimum 12°00′ (12.00°) 11°50′ (11.83°) Nominal 12°45′ (12.75°) 12°35′ (12.58°) Maximum 13°30′ (13.50°) 13°20′ (13.33°) Minimum 0 mm (0 in) Nominal 1 mm (0.05 in) Maximum 2 mm (0.10 in) : Fuel, radiator coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions. QUICK REFERENCE CHART: ALTIMA 2009 Rear Wheel Alignment (Unladen*) INFOID:0000000003301443 SEDAN Market Camber Degree minute (Decimal degree) USA and Canada Mexico Minimum −1° 07′ (−1.12°) -0° 17′ (-0.28°) Nominal −0° 37′ (−0.62°) 0° 13′ (0.22°) Maximum −0° 07′ (−0.12°) 0° 43′ (0.72°) SFA234AC Distance (A - B) mm (in) Total toe-in Distance difference between RH and LH side mm (in) 2.4 (0.09) Minimum −2 (−0.08) Nominal 0 (0) Maximum 2 (0.08) Angle (left plus right) Degree minute (decimal degree) 0° 6’ (110°) 0° 6’ (108°) *: Fuel, radiator coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions. COUPE Market Camber Degree minute (Decimal degree) USA and Canada Mexico Minimum −1° 24′ (−1.394°) −0° 35′ (−0.584°) Nominal −0° 54′ (−0.894°) −0° 5′ (−0.084°) Maximum −0° 24′ (−0.394°) 0° 25′ (0.416°) SFA234AC Distance (A − B) mm (in) Total toe-in Distance difference between RH and LH side mm (in) 2.5 (0.10) Minimum −2 (−0.08) Nominal 0 (0) Maximum Angle (left plus right) Degree minute (decimal degree) *: Fuel, engine coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions. 2 (0.08) 0° 6′ (0.112°) QUICK REFERENCE CHART: ALTIMA 2009 Wheelarch Height (Unladen*1) INFOID:0000000003301442 SEDAN Unit: mm (in) SFA818A Market Engine USA QR25DE *2 Canada QR25DE *3 QR25DE *2 Mexico QR25DE *3 QR25DE *3 Tire size 215/60R16 215/60R16 215/60R16 215/60R16 215/60R16 Front (Hf) 716 (28.19) 717 (28.23) 714 (28.11) 715 (28.15) 727 (28.62) Rear (Hr) 710 (27.95) 710 (27.95) 715 (28.15) 715 (28.15) 730 (28.74) Market USA Canada Mexico Engine VQ35DE *3 VQ35DE *3 VQ35DE *3 VQ35DE *3 VQ35DE *3 Tire size 215/60R16 215/55R17 215/60R16 215/55R17 215/55R17 Front (Hf) 716 (28.19) 715 (28.15) 714 (28.11) 713 (28.07) 725 (28.54) Rear (Hr) 710 (27.95) 710 (27.95) 715 (28.15) 714 (28.11) 730 (28.74) *1: Fuel, engine coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions. *2: Without ABS *3: With ABS COUPE Unit: mm (in) SFA818A Market Engine USA QR25DE *2 QR25DE *3 Canada VQ35DE QR25DE *2 QR25DE *3 Mexico VQ35DE VQ35DE Tire size 215/60R16 215/60R16 215/55R17 215/60R16 215/60R16 215/55R17 215/55R17 Front (Hf) 714 (28.11) 715 (28.15) 713 (28.07) 712 (28.03) 713 (28.07) 711 (27.99) 723 (28.46) Rear (Hr) 702 (27.54) 702 (27.64) 702 (27.64) 706 (27.80) 706 (27.80) 706 (27.80) 742 (29.21) *1: Fuel, engine coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions. *2: Without ABS *3: With ABS QUICK REFERENCE CHART: ALTIMA Brake Specifications 2009 INFOID:0000000003301444 Unit: mm (in) Brake model Front brake Kiriu Cylinder bore diameter 57.2 (2.25) Pad length × width × thickness 132 × 50 × 11 (5.20 × 1.969 × 0.433) Rotor outer diameter × thickness 296 × 26 (11.70 × 1.02) Brake model Rear brake Kiriu Cylinder bore diameter 34.93 (1.375) Pad length × width × thickness 83.0 × 31.9 × 8.5 (3.268 × 1.256 × 0.335) Rotor outer diameter × thickness Master cylinder Cylinder bore diameter Control valve Valve model Brake booster 292 × 9 (11.50 × 0.35) 25.4 (1) Electric brake force distribution Booster model Bosch Diaphragm diameter 280 (11) Recommended brake fluid DOT 3 Brake Pedal INFOID:0000000003301445 Brake pedal height (from dash lower panel top surface) Depressed pedal height [under a force of 490 N (50 kg-f, 110 lb-f) with engine running] CVT 190.7 - 202.7 mm (7.51 - 7.98 in) M/T 181.3 -193.3 mm (7.14 - 7.61 in) CVT 60.7 - 72.7 mm (2.39 - 2.86 in) M/T 51.3 - 63.3 mm (2.02 - 2.49 in) Clearance between stopper rubber and threaded end of the stop lamp switch and brake switch Pedal play 0.74 - 1.96 mm (0.0291 - 0.0772 in) 3 - 11 mm (0.12 - 0.43 in) Front Disc Brake Brake model Brake pad Disc rotor INFOID:0000000003301446 Kiriu Standard thickness (new) 11.0 mm (0.433 in) Repair limit thickness 2.0 mm (0.079 in) Standard thickness (new) 26.0 mm (1.024 in) Repair limit thickness 24.0 mm (0.945 in) Thickness variation (measured at 8 positions) 0.015 mm (0.0006 in) Maximum runout (with it attached to the vehicle) 0.035 mm (0.0014 in) Rear Disc Brake Brake model Brake pad Disc rotor INFOID:0000000003301447 Kiriu Standard thickness (new) 8.5 mm (0.335 in) Repair limit thickness 1.0 mm (0.039 in) Standard thickness (new) 9.0 mm (0.354in) Repair limit thickness 8.0 mm (0.315 in) Thickness variation (measured at 8 positions) Maximum runout (with it attached to the vehicle) 0.015 mm (0.0006 in) 0.05 mm (0.002 in) QUICK REFERENCE CHART: ALTIMA Fluids and Lubricants 2009 INFOID:0000000003301448 Capacity (Approximate) Description US measure Imp measure Liter QR25DE 20 gal 16-5/8 gal 75.6 VQ35DE 20 gal 16-5/8 gal 75.6 With oil filter change QR25DE 4-7/8 qt 4 qt 4.6 VQ35DE 4-1/2 qt 3-3/4 qt 4.2 Without oil filter change QR25DE 4-1/2 qt 3-3/4 qt 4.3 VQ35DE 4-1/4 qt 3-1/2 qt 4.0 QR25DE 5-3/4 qt 4-3/4 qt 5.4 VQ35DE 4-7/8 qt 4 qt 4.6 QR25DE 2 gal 1-5/8 gal 7.6 VQ35DE 2-1/8 gal 1-3/4 gal 8.2 RE0F09B 10-6/8 qt 9 qt 10.2 RE0F10A 8-3/4 qt 7-1/4 8.3 Manual transaxle fluid (MTF) 3-5/8 pt 3 pt 1.7 Power steering fluid (PSF) 1-1/8 qt 7/8 qt 1.0 Brake and clutch fluids — — — Brake grease — — — Brake pad plate grease — — — Multi-purpose grease — — — 1.10 ± 0.055 lb 0.50 ± 0.025 kg 0.50 ± 0.025 kg 5.03 fl oz 5.3 fl oz — — Fuel Engine oil Drain and refill Dry engine (Overhaul) Cooling system with reservoir tank CVT fluid Air conditioning system refrigerant Air conditioning system oil Windshield washer fluid 150 m —
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Modify Date : 2008:07:28 15:23:04-03:00 Create Date : 2006:09:19 16:27:57Z Creator : FrameMaker+SGML 5.5.6p145J Page Count : 10 Page Mode : UseOutlines Page Layout : OneColumn Has XFA : No About : uuid:4ef68ae9-7265-47c7-b394-c35c3229130f Producer : Acrobat Distiller 4.05 for Windows Creation Date : 2006:09:19 16:27:57Z Mod Date : 2008:07:28 15:23:04-03:00 Metadata Date : 2008:07:28 15:23:04-03:00 Creator Tool : FrameMaker+SGML 5.5.6p145J Document ID : uuid:8b5e6993-6db7-4f4d-999f-4b12d161440f Format : application/pdf Title : Fwd_master_new-060915.fmEXIF Metadata provided by EXIF.tools