.\.. KH4000 General Catalog
User Manual: KH4000
Open the PDF directly: View PDF 
.
Page Count: 14
Instrumentation, Control and Systems
RECORDERS
CONTROLLERS
RADIATION THERMOMETERS
MOISTURE METERS
SENSORS
THYRISTOR REGULATORS
TRACEABILITY
RECORDERS
CONTROLLERS
RADIATION THERMOMETERS
MOISTURE METERS
SENSORS
THYRISTOR REGULATORS
TRACEABILITY
WEBSITE
ISO 9001 Certified
JQA-0656 ISO 14001 Certified
JQA-EM2414
1
Film Drying Process
Induction Heating
Control
LOOP SOLUTION
LOOP SOLUTION
Infrared radiation thermometer
IR-FA series Page 7
Digital indicating controller
DB600 series Page 5
Graphic recorder
KR2000 series Page 3
Hybrid memory recorder
AH4000 series Page 3
Program controller
KP series Page 6
Thyristor regulator
JJ series Page 11
Infrared radiation thermometer
IR-CZ series Page 7
Moisture meter
IRMA series Page 10
Graphic recorder
KR2S series Page 3
Vacuum Furnace
IR-CZ
IR-CZ
LOOP SOLUTION
2
Metal Forging
Semiconductors
Measurement
Monitor
Graphic recorder
KR2000 series Page 3
Infrared radiation thermometer
IR-SA series Page 8
Thermal image sensor
TP series Page 8
Infrared radiation thermometer
IR-CA series Page 7
SolidPak thermocouple
NCZ series
Thyristor regulator
JW series Page 11
Program controller
KP series Page 6
Network logger
KE series
Continuous Annealing Furnace
Package software
CISAS
Digital indicating controller
DB series Page 6
Thyristor regulator
JU series Page 11
Graphic recorder
KR2/3 series Page 3
IR-SA
IRC
RECORDERS
HYBRID MEMORY RECORDER
AH4000 AL4000 SERIES
GRAPHIC RECORDER
KR2000 KR2S SERIES
These recorders are a hybrid recorder which employs bright and
clear, easy to view LCD display. Measuring value display is
prepared as 1 point display, multi-points simultaneous display and
digital display + bar graph display.
Various measuring and recording setting can be easily done by
front key switch and confirmed by LCD digital display.
●SD card as data storage (512MB, 1GB, 2GB)
●Setting/Recording software available (Standard attached)
■Main Specifications
No. of measuring points:
(AL) 6 points (AH) 6, 12, 24 points
(AL/AH) 1 pen, 2 pens, 3 pens, 4 pens
Input types: DC voltage, DC current, Thermocouple,
Resistance thermometer
Accuracy rating: ±0.1% ±1 digit (DC voltage input)
Chart speed: 1 to 1500mm / h (Dotting type)
1 to 600mm / h, 1 to 200mm/min (pen type)
Power supply: 100 to 240VAC, 50/60Hz
Communications: Ethernet, RS232C, RS422A, RS485 (Option)
Dimensions: (AL) 144 X 144 X 216mm
(AH) 288 X 288 X 216mm
KR2000 & KR2S Series are network-compatible paperless recor-
ders with high performance and high operating function em-
ployed high visibility 5.6" & 5.7" TFT color LCD display. Further-
more KR2S series has touch panel function.
The recorder can be used for various applications such as data
management, research, development, remote and wide range
monitoring by utilizing internet environment.
●6 or 12 channels measurement at sampling rate of
1sec or 100ms
●Simple no-manual operations. Large data memory
■Main Specifications
No. of measuring points:
6, 12 points
Input types: DC voltage, DC current, Thermocouple,
Resistance thermometer
Accuracy rating: ±0.1% ±1 digit (DC voltage input)
Power supply: 100 to 240VAC, 50 / 60Hz
Communications: Ethernet, RS232C, RS422A, RS485 (Option)
Dimensions: (KR2000) 144X144X204mm
(KR2S) 144X144X235.7mm
KR3000 & KR3S Series are network-compatible paperless recor-
ders with high visibility max. 12.1" TFT color LCD display and
touch panel operation system. High speed of fastest sampling
rate 100ms for 48 points and high accuracy of ±0.1% were real-
ized, and measured data is stored into internal memory and max-
imum 8GB compact flash card (CF card).
As it can be monitored by a web browser display on several com-
puters on intranet or internet, FTP transfer of data file and E-
mail notification are also available.
●Max large sized 12.1" TFT color LCD touch panel display
●Large capacity of data memory and various
recording method
●Multi points recording with high speed/high accuracy
■Main Specifications
No. of measuring points:
12, 24,36 and 48 channels
Input types: DC voltage, DC current, Thermocouple,
Resistance thermometer
Accuracy rating: ±0.1% ±1 digit (DC voltage input)
Power supply: 100 to 240VAC, 50 / 60Hz
Communications: Ethernet, RS232C, RS422A, RS485 (Option)
Dimensions: (KR3000) 288X288X218mm
(KR3S) 288X288X180mm
AH4000 AL4000
3
Data Analysis Software
KR2000 KR2S KR3000 KR3S
GRAPHIC RECORDER
KR3000 KR3S SERIES
RECORDING AND DATA LOGGING
4
HYBRID RECORDER
KH4000 KL4000 SERIES
KH4000 & KL4000 Series hybrid recorders realize simple and
easy operation as analog recorders.
Not only can each measured value be read from the custom
made analog scale plate which incorporates input type and
measurement value input, but a comprehensive LED display
also enables precise digital measurements to be taken by the
user.
■Main Specifications
No. of measuring points:
(KL) 6 points (KH) 6, 12, 24 points
Input types: DC voltage, DC current, Thermocouple,
Resistance thermometer
Accuracy rating: ±0.1% ±1 digit (DC voltage input)
Power supply: 100 to 240VAC, 50 / 60Hz
Communications: Ethernet, RS232C, RS422A, RS485 (Option)
Dimensions: (KL) 144 X 144 X 216mm
(KH)288 X 288 X 216mm
LE5000 series are 250mm hybrid recorders with multi-range in-
put.
Innovative design high performance recorder provides high accu-
racy ±0.05%; high speed sampling 0.1 second for 36 points and
high speed recording, 3 seconds/line. Simple operational keys
and PC setting functions drastically improved usability of record-
ing system.
●High speed sampling at 0.1 sec for 36 points and
high-speed recording
●Operation keys are functionally designed for ease
of use
●High accuracy of 0.05%
■Main Specifications
No. of measuring points:
12, 24 or 36 channels
Input signals: DC voltage 8 kinds, Thermocouple 28 kinds,
Resistance thermometer 8 kinds, DC current
(shunt resistors)
Accuracy ratings: ±0.05% ±1 digit (DC voltage)
Power supply: 100 to 240VAC, 50/60Hz
Communications:Ethernet, RS422A, RS485 (option)
KH4000 KL4000
ANALOG RECORDERS EH3000 EL3000 ES600 SERIES
1 to 12-point, dotting types and 1 to 3-pen
types are available. 1-point, 2-point, 3-point, 6-point dotting
types and 1 to 3-pen types are available.
●Various options for many applications
●High accuracy on 180mm industrial
recorders
●Robust analog recorders
●Small and light-weight
●Various models and options
1-point, 2-point, 3-point, 6-point dot-
ting type and 1-pen types are avail-
able in the recorders.
●Small and light-weight
(depth-200mm)
●Reliable self-balancing type
■Main Specifications
No. of measuring points:
(EH3000 DOT) 1 to 12 points (EH3000/EL3000 PEN) 1 to 3 pens
(EL3000 DOT) 1 to 6 points
Input types: DC voltage, DC current,
Thermocouple,
Resistance thermometer
Accuracy rating: (EH) ±0.25% ±1 digit (DC voltage input)
(EL) ±0.5% ±1 digit (DC voltage input)
Power supply: 100 to 240VAC, 50 / 60Hz
■Main Specifications
No. of measuring points:
1 to 6 points, 1pen
Input types: DC voltage,
DC current,
Thermocouple,
Resistance
thermometer
Accuracy rating: ±1.0% ±1 digit
(DC voltage input)
Power supply: 100 to 240VAC
50 / 60Hz
EH3000 DOT EH3000 PEN EL3000 DOT EL3000 PEN ES600
HYBRID RECORDER
LE5000 SERIES
HYBRID RECORDER
LE5000 SERIES
DIGITAL INDICATING CONTROLLERS
DIGITAL INDICATING CONTROLLERS
DB600 SERIES
DIGITAL INDICATING CONTROLLERS
LT/LTA SERIES
Conventional Auto-tuning
Conventional Auto-tuning
New PID control
Disturbance occurs
Z control
Temperature
Temperature
Time Time
The DB600 series have three types of size (DB670...96
x 96mm, DB650...48 x 96mm, DB630...48 x 48mm).
Various functions including universal input and
multiple setting values (8 types) are provided as
standard.
●Large easy-to-view 5 digit display
●Highly-functional operation screen and
setting screen
●Simple program(4 patterns, 12 steps)
■Main Specifications
Input type : Thermocouple
(B,R,S,K,E,J,T,N,others)
Resistance thermometer
(Pt100,JPt100,Pt50)
DC voltage
(±20mV,±100mV,±5V,±10V)
Accuracy rating : ±0.1% of FS ± 1 digit
of measuring range
Control system : PID system or Z control
Output type : ON-OFF pulse output, ON-OFF servo
output (DB650 and DB670 only),
Current output, SSR drive pulse
output, Voltage output
Power supply : 100 to 240VAC or 24VAC/24VDC
Communication interface :
DB670 RS422A, RS485(option)
DB650 RS422A, RS485(option)
DB630 RS485(option)
Dimensions : DB670 96 x 96 x 73mm
DB650 48 x 96 x 73mm
DB630 48 x 48 x 88mm
Z Control (Economical control)
Z control is a control algorithm learned from plants. Compared to conventional control algorithm, Z control is the algorithms that
keeps start-up speed and improves overshoot suppressive effect, energy saving effect, disturbance suppressive effect and
shorten the settling time. Hemathermal nature of organism is robust to the environmental change and energy saving structure. Z
control includes this ecological algorithm and compared to conventional control, it improves robustness of energy saving effect,
parameter variation and load variation.For the compatibility with PID control, parameter is similar parameter as PID control.
Input type
Thermocouple
Resistance
thermometer
DC voltage
DC current
K,E,J,N B,R,S,N,K,E,J,T,U,L
Pt100,JPt100
―
―
±0.3% of
± 1 digit
or ±2ºC,
whichever
larger ±0.5%
of FS
± 1 digit
±0.2%
of FS
± 1 digit
±0.1%
of FS
± 1 digit
Accuracy rating
Thermocouple
4 to 20mA
0 to 5V
PID system
(2-position is
available) PID system
(2 types of algorithm)
±0.2% of
scale
range
± 1 digit
Resistance
Thermometer
Control system
Sampling 250msec 500msec 300msec 100msec
ON-OFF pulse,
SSR drive pulse,
Current output
Output type
Power supply
Dimensions
(mm)
100 to
240VAC 100 to 240VAC
24 to 48 VDC
100 to 240VAC
21.6 to 26.4 VDC
96 x 96
x 127 48 x 48
x 60 48 x 96 x 65 /
96 x 96 x 65
ON-OFF pulse, SSR drive pulse,
Current output, Voltage output
LT110 LT23A
LT35A/37A LT45A/47A
DB670 DB650 DB630
5
Skunk cabbage (white arum)
Skunk cabbage (white arum)
LT110
LT35A/37A LT45A/47A
LT23A
DIGITAL INDICATING CONTROLLERS
DB SERIES
DIGITAL INDICATING CONTROLLERS
CP SERIES
PROGRAM CONTROLLERS
DP-G SERIES
PROGRAM CONTROLLERS
KP SERIES
●Large easy-to-view 5 digit display
●Highly-functional operation screen and setting screen
●Outstanding controllability
●Conforming to international safety standards and
CE marking and conforming to RoHS
■Main Specifications
Input type : Thermocouple (B,R,S,K,E,J,T,N,others)
Resistance thermometer (Pt100,Pt-Co,others)
DC voltage (±10mV,±20mV,±50mV,±100mV,
±5V,±10V)
Accuracy rating : ±0.1% of measuring range ± 1 digit
Control system : PID system or Z control
Output type : ON-OFF pulse, ON-OFF servo, Current output,
SSR drive pulse, Voltage output
Power supply : 100 to 240VAC or 24VAC/24VDC
Communication interface :
RS232C, RS422A, RS485(option)
Dimensions : 96 x 96 x 127mm
CP350/370 series is
CHINO new digital indi-
cating controller. High
function and optional
programmed control
mode are provided.
●Adopt MODBUS communications mode, CE marking
●Universal power supply (100-240V AC)
●More programmed control mode
●Can select the PID mode from total PID type or
differential type
■Main Specifications
Input type : Thermocouple (B,R,S,K,E,J,T,N,others)
Resistance thermometer (Pt100,JPt100)
DC voltage (±5V)
Accuracy rating : ±0.25% of measuring range ± 1 digit
Control system : PID system
Output type : ON-OFF pulse, Current output,
SSR drive pulse, Voltage out put
Power supply : 100 to 240VAC
Dimensions : CP350...48 x 96 x 132 mm
CP370...96 x 96 x 132 mm
The DP-G series is
graphic program control-
ler employed high visibili-
ty 5.6” TFT color LCD
display. Maximum 200
types of program pattern
(Maximum 4000 steps)
are stored and perfor-
mance pattern is select-
able.
●Easy program pattern setting on graphic screen
●High performance and universal input
●Storing settings in CF card
■Main Specifications
Input type : Thermocouple (B,R,S,K,E,J,T,N,others)
Resistance thermometer
(Pt100,JPt100,others)
DC voltage (±10mV,±20mV,±50mV,±100mV,
±5V,±10V)
DC current(20mA)
Accuracy rating : ±0.1% of measuring range ± 1 digit
(DC voltage/current input)
Control system : PID system
Output type : ON-OFF pulse type, ON-OFF servo type ,
Current output type, SSR drive pulse type,
Voltage output type
Power supply : 100 to 240VAC ,50/60Hz
Dimensions : 144 x 144 x 252mm
●Large easy-to-view 5 digit display
●Highly-functional operation screen and setting screen
●Easily identifiable pattern progress display
●Outstanding controllability
●Conforming to international safety standards and
CE marking and conforming to RoHS
■Main Specifications
Input type : Thermocouple (B,R,S,K,E,J,T,N,others)
Resistance thermometer (Pt100,Pt-Co,others)
DC voltage (±10mV,±20mV,±50mV,±100mV,
±5V,±10V)
Accuracy rating : ±0.1% of measuring range ± 1 digit
Control system : PID system
Output type : ON-OFF pulse, ON-OFF servo, Current output,
SSR drive pulse, Voltage output
Power supply : 100 to 240VAC or 24VAC/24VDC
Communication interface :
RS232C, RS422A, RS485 (option)
Dimensions : 96 x 96 x 127mm
EASY-TO-OPERATE AND ABUNDANT FUNCTIONS
The KP1000 ser-
ies is a 96 x
96mm digital pro-
gram controller
with the indicating
accuracy of ±0.1%
and the control cy-
cle of approximately 0.1 seconds and maximum 19 program
patterns (maximum 19 steps/pattern).
Various function including the whole program pattern display
screen and universal input are provided as standard.
The DB series is a
96 x 96mm digital in-
dicating controller
with the indicating
accuracy of ±0.1%
and the control cycle
of approximately 0.1
seconds.
Various function including universal input and multiple setting
values (8 types) are provided as standard.
DB1000
CP350 CP370
KP1000
DP1000G
6
INFRARED RADIATION THERMOMETERS
HIGH-SPEED INFRARED RADIATION
THERMOMETER
IR-CZ SERIES
FURNACE MONITORING
SYSTEM
CPA-R SERIES
INFRARED RADIATION THERMOMETER
IR-BA SERIES
INFRARED RADIATION THERMOMETER
IR-CA SERIES
7
●Reduced optical error measurement caused by
dust and contaminants
●High response, 2 to 15ms
●Significantly effective for distinctive applications:
-
Ceramic high-temp. baking process
-
Crystal growing
■Main Specifications
Temperature range:
350 to 2000ºC / 400 to 3100ºC / 500 to 3500ºC
Response time: 2 to 15ms
Analog output: 4 to 20mADC
●Functional digital display and parameter setup keys
●High accuracy, high-speed response, high reliability
●High distance factor in focusable model to enable ease of
installation
●Optional RS485 communications
●Remote setup and monitoring by IR-GZ connectable up to
32 IR-CA
●Software package IR-VXC1E
●Variety of accessories to protect the IR-CA under harsh
environment
The IR-CA product line of non-
contact infrared thermometers
provides broad selection of units
to match your applications and re-
quirements for non-contact tem-
perature measurement. The prod-
uct line consists of 15 different
series grouped into general pur-
pose and application specific
models.
●High response: Standard: 100ms, High-speed: 50ms
●Compact & lightweight: W32XH56XD100mm, 220g
■Main Specifications
Detecting element/measuring wavelength: Thermopile
Temperature range:
0 to 300ºC, 0 to 600ºC
Output: 4 to 20mADC
Power supply: 12 to 24VDC
The IR-BA series is a non-con-
tact and high-speed compact ra-
diation thermometer. The card
sized detector with built-in con-
verting function of 4-20mA output
signal can easily be installed in
narrow places, production lines
and small equipment.
A standard speed type and a
high speed type (50ms/95%) are respectively available for
these standard type and small-target/short-distance type and
small-target/long-distance type, and also various applicable
types like as glass, lamp-anneal, film and burning gas.
FIBER OPTIC RADIATION
THERMOMETER
IR-FA SERIES
The IR-FA series is a fiber
optic radiation thermometer
featuring multi-function and
high-speed response (10ms).
Three types: single-color
type for low temperature; sin-
gle-color type for me-
dium/high temperature and
two-color type, are available.
●Low temperature type with high-speed response and
short wavelength enables to measure objects with low
emissivity like as metals.
●Medium/high temperature type with high accuracy ±0.5 to
1% for 1000 to 2000ºC) and high-speed response is for
various temperature measurement fields.
●Two-color type is stable with less effectiveness of smoke,
vapor, dust and lack-of-view.
■Main Specifications
Detecting element/measuring wavelength:
Single-color type: PbS / 2.0µm, InGaAs / 1.55µm, Si / 0.9µm,
Two-color type: Hybrid element 0.9 / 1.55µm,
Output: 4 to 20mADC
Power supply: 24VDC
■Main Specifications
Viewable angle: H96º X 70º (100º Lens)
Wavelength: 0.8 to 1.0µm
Temperature range: 700ºC to 2500ºC
(Assignable span:200ºC to 500ºC)
Accuracy: ±1% at full scale (black body)
Lens array and camera unit Camera control: Up to 3 Cameras
Display: 8.4” Color LCD (touch panel)
External input/output: Contact output max 40 points
Protective Structure: IP65 (Front Panel)
Image processing unit
The CPA-R series utilizes a CCD camera, which has sensitivity at 1.0µm and
image processing unit that provides an image and converts video signal from
the camera into temperature information.
The special high temperature optics lens array system can be inserted through
a small insertion hole on many types of furnaces.
The image processing unit has an 8.3" LCD touch pan-
el that displays wide-angle image and temperature infor-
mation. It also provides the capability of up to 40 points
of contact Inputs/outputs as well as 32 points of analog
outputs through an external I/O unit.
NON-CONTACT TEMPERATURE MEASUREMENT
8
ON-LINE INFRARED RADIATION
THERMOMETER
IR-SA SERIES
RADIATION
THERMOMETER
IR-H SERIES
PALM SIZED
INFRARED RADIATION
THERMOMETER
IR-TE2
HAND-HELD TYPE
INFRARED RADIATION
THERMOMETER
IR-TAP
RADIATION
DIGITAL THERMOMETER
IR-AH SERIES
●Withstand temperature 90ºC, IP67, CE marking
●Fast response time of 0.002 seconds for IR-SAI/IR-SAS
●RS485 MODBUS connectivity
●Telescope or laser pointer for targeting
The IR-SA series of infrared Radi-
ation thermometer provides
broad selection of small and ro-
bust units to match your on-line
applications for non-contact tem-
perature measurement from 0 to
2500ºC under harsh environment.
Four models are available with
MODBUS connectivity for para-
meter setup through remote set-
ting unit or PC.
THERMAL IMAGING SENSOR
TP SERIES
THERMAL IMAGING SYSTEM
CPA-L SERIES
THERMAL IMAGING SENSOR
Model IR-TE2 palm-sized infrared thermometer is
designed to measure the surface temperature of
objects without making contact with them. The built-in
laser sighting pinpoints the center of the area being
measured on the target.
Washable!!
Non-contact temperature measurement in one second!!
●Conforms to IP67 (dustproof and waterproof)
and washable.
●ABS resin housing with sanitary specification
fits in your safety program. CE marking
●Wide temperature range of -40 to 300ºC
(-40 to 572ºF) - ºC/ºF selectable
●Temperature range: -40 to 500ºC
●Spot size: φ30 / 1000mm
●CE marking
●Temp.range of -10 to 300ºC
●2000 pixel resolution
●Just one click operation
and instant glance
●ABS resin(anti bacterial)
●CE marking
The handheld thermometer is a small and
lightweight with a clear view-finder. The direct
view-finder enables to measure a small object
with a long distance.
The IR-TA series hand-
held type thermometer
is easy to use and can
be applied to a variety of
applications. The built-in
laser sight helps to
pinpoint a measured spot accurately.
The hand-held thermometer offers a
wide measuring range of 600ºC to
3000ºC for IR-AHS, 900ºC to 3000ºC for
IR-AHU, and 50ºC to 1000ºC for IR-AHT,
digital display of the measured value in
view-finder and LCD display, plus
storage of measured data.
■Main Specifications
Detecting element: Si (IR-HS), InGaAs (IR-HI),
Si/InGaAs (IR-HQH)
Response time: 0.2 seconds
Power supply: 2AA batteries
●Temperature range from 400ºC to 3000ºC
(IR-HQH)
●CE marking
●Low temperature area and emissivity are
measured by connecting a K-type
thermocouple separately prepared.
■Main Specifications
Detecting element: Si, Thermopile
Power supply: 4AA batteries
●A data logging software package for
easy data treatment
●CE marking
HAND-HELD TYPE
THERMAL IMAGING SENSOR
TP-S
The TP-S series is a ultra small
handy thermal image sensor both
industrial and commercial use.
●Easy to use and implement
●2000 pixel resolution
●Built-in alarms
●IP65/NEMA4, CE marking
The TP series is a compact infrared thermal imaging sensor utilizing a thermopile
array detector.
Fixed mount type thermal image measuring device
for online monitoring, measurement, and inspection
The CPA-L series consists of a fixed mount type camera using an uncooled
element and a controller.
The camera, supporting measuring wavelengths of 8 to 14µm and a
temperature detecting range of -40ºC to 500ºC, is compact, lightweight, and
excellent in dust and drip proofing performance.
The controller has image processing functions such as binarization and
particle analysis functions in addition to the temperature measurement
processing function and can provide output via a LAN and as analog/digital
signals.
■Main Specifications
Temperature range: -20 to 300ºC,100 to 800ºC
Resolution: 0.5ºC (At black body temperature of 100ºC)
Accuracy: ±2% of reading or ±3ºC whichever lager
(At ambient temp of 25ºC±2ºC)
Power supply:12 to 24VDC
TEMPERATURE / HUMIDITY SENSORS
HANDHELD TYPE
TEMPERATURE/HUMIDITY METER
HN-EH SERIES
9
■Main Specifications
Measuring range: Temperature
-10 to 45ºC (Sensor built-in type)
-20 to 70ºC (Probe type)
Relative humidity 5 to 95%RH (no dew condensation)
Dew point temperature -35 to 55ºC (standard type only)
Measuring resolution: Temperature 0.1ºC, Relative, humidity 0.1%RH
Response: Temperature 40 seconds or less (under 0.5m/s
ventilation, 90% step response of approx.50ºC→25ºC)
Humidity
40 seconds or less (25ºC constant, under 0.1m/s ventilation,
90% step response of approx.30%RH→50%RH)
Standard: CE marking
HN-EH series is accurate handheld type temperature/humidity meter
with the measuring range of -20 to 70ºC(sensor built-in type -10 to
45ºC) and 5 to 95%RH. Two types of model, simple basic type (sensor
built-in type only) and standard type (sensor built-in type and probe
type) , can be selected to meet various applications requirement.
PALM-SIZED
TEMPERATURE/HUMIDITY METER
HN-CH SERIES
●Three types of sensors, sensor built-in type, probe
type and separated type available for various
applications
■Main Specifications
Relative humidity
Sensor: High-polymer capacitance type
Measuring range: 0 to 100% RH
Accuracy rating: ±2%RH (0 to 90%RH at 25ºC)
Temperature
Sensor: Semiconductor type
Measuring range: -10 to 50ºC
Accuracy rating: ±0.5ºC (0 to 50ºC)
Data logging: Temperature and humidity -each 8000
data (16000 data in total)
Display: Current data, replaying data, parameters
Communications interface: RS232C or RS485
Power supply: 2AA batteries or 100-240 V AC (with AC
adapter; sold separately)
Standard: CE marking
DIGITAL THERMOMETER
FOR FOODS
MODEL MF1000
ROLLER SURFACE THERMOCOUPLES
CO15 SERIES
●Built-in compensating circuit for the difference between actual temperature and adjustment atmospheric temperature
●Affection-free from emissivity of surface
■Main Specifications Element: K type thermocouple
Measuring accuracy: Within ±5ºC in 200ºC span
Measuring distance: 1 to 2mm (fixed)
Output: E.M.F. of K type thermocouple
The thermocouples are de-
signed for non-contact
measurement of surface
temperature of moving or
rolling materials such as
heating rollers, moving
belts and plastic sheets.
The portable thermometer mod-
el MF1000 is combined with a
needle type sensor for meas-
urement of internal tempera-
ture of foods or liquid tempera-
ture.
The HN-CH series is reliable and ac-
curate palm-sized temperature/hu-
midity meter with the humidity range
of 0 to 100%RH by using a newly de-
veloped capacitance type humidity
sensor. The data logging function ca-
pable to store each 8000 readings
of temperature and humidity into
memory is built-in.
●Washable and anti-bacteria surface housing
■Main Specifications
Temperature range: -40 to 260ºC
Measuring accuracy: ±0.5ºC
Response time: 2 seconds
Sensor: K type thermocouple
Sealing: IP67 (waterproof and dustproof)
Standard: CE marking
Speedy, lightweight, high accuracy !!
Measurement in 30-seconds level !!
●Overriding fast response time, measurement 30-seconds level
●Small, lightweight (sensor built-in type approx. 120g) and easy operation
●Low running cost, built-in type sensor unit is interchangeable by user
SELECTION FROM VARIOUS SENSORS FOR EACH APPLICATION
10
TEMPERATURE CARD LOGGER
MR SERIES
■Main Specifications
Measuring range:-40 to 60ºC, 0 to 100ºC, 50 to 150ºC
Accuracy rating: ±1.0ºC ±1 digit
(±0.5ºC ±1 digit for -5 to 50ºC)
Sensor: Automatic switchover of built-in/external sensor.
External sensor operates when it is connected
Measuring range of the built-in sensor: -40 to 60ºC
Number of storing data:
6000 data (about 8-month data storage at
60-minute measuring interval)
Storing mode: Automatic stop mode under specified conditions
or endless mode by a PC
Communications:Built-in (connection to a PC through a data
readout unit)
Standard: IP64, CE-marking
External dimensions: 54(W) X 110(H) X 20.5(D)mm
Weight: 95g (including batteries)
Power supply: 2AAA batteries
Battery life: Approx. 1 year (at 25ºC and 10-minute interval)
■Main Specifications
Humidity
Measuring range: 0 to 100% (no dew condensation)
Accuracy range: ±2%RH (at 0 to 90%RH and 25ºC)
±3%RH (at 90 to 95%RH and 25ºC)
Coefficient of relative humidity / temperature:
±0.1%RH / ºC (at 5 to 80ºC)
Temperature
Measuring range:-40 to 180ºC
Accuracy range: ±0.3ºC (±0.5ºC Heat-resistive separated type)
THERMO HYGROMETER
HN-C SERIES
HN-C series using developed humidity
element features high performance
and reliability 2-wire transmission type
thermo-hygrometers for the wide meas-
uring range of 0 to 100%.
Models with temperature output of 3-
wire type Pt100 is available.
Wall-mount type, separated type and
inserting type are available for various
application.
Heat-resistive and separated type,
which can be used in operating temper-
ature of -40 to 180ºC is available, too.
■Main Specifications
Measuring range:
Thermocouple
K -200.0 to 1370.0ºC
E -200.0 to 700.0ºC
J -200.0 to 700.0ºC
T -200.0 to 400.0ºC
DC voltage 0 to 5V (scale -9999 to 9999)
DC current 0 to 20mA (scale -9999 to 9999)
Accuracy rating:
Thermocouple
±(0.1% of measuring value + 0.3ºC＞-100ºC)
±(0.1% of measuring value + 0.6ºC＜100ºC)
DC voltage (0.1% of measuring value
+0.2% of range)
●Input signals: thermocouple, K, E, J, T, 0 to 5V, 0 to 20mA
●Simultaneous 4 channels, measurement and display
●Data processable through a PC
HANDY LOGGER
MR2041 SERIES
■Main Specifications
Measuring range: Thermocouple type K -200 to 1370ºC
T -200 to 400ºC
RTD PT100 -200 to 500ºC
Display: 3-1/2 digital LCD with backlight
Computation: Max/min/average/relatives
Power supply: 2AA batteries
Standard: CE marking
Dimensions: 76(W) X 164(H) X 36.3(D)mm
HANDHELD DIGITAL THERMOMETER
MC1000 SERIES
MC1000 is a handheld digital therm-
ometer having an easy-to-read
large LCD display and light weight.
A range of temperature probes with
a variety of shapes and sizes to suit
the application requirements.
MR series is a small size and light-
weight card logger. Various types of
external mounting sensors including
a built-in type are available.
INFRARED MULTI ANALYZER
IM SERIES
ON-LINE MEASUREMENT OF INFRARED MULTI ANALYZER,
MOISTURE (THICKNESS) METERS
●Dual displays for measured
data and arithmetic result
●Multi-input
(thermocouple/RTD) allows
various applications
●Exclusive connector prevents accidental probe
disconnection
●A traceability or inspection
certificate, which can be used
for HACCP or ISO9000, is available.
(Separate purchase required)
●Capable to store up 6000 data per channel
●Conforms to CE marking and IP64
●Up to 10 wavelength, capable of measuring 4 constituents
●Ethernet, MODBUS communications
●High-speed & High-repeatability (28ms)
●Self-diagnostic function, easy maintenance
Handy logger MR2041 is a palm size
data logger, it is capable of storing up to
1000 temperature data per each chan-
nel. Power supply of logger is select-
able from AA battery or AC adap-
tor, so it is usable as a portable
type logger or fixing type logger.
Using the exclusive software,
recording/recalling of data
and programming of logging
parameters can be execu-
ted with logger or through a
PC.
The IM series is on-line multi analyzer utilizing the infrared absorption.
Converting capabilities are built into the compact designed detector unit for easy in-
stallation and operation.
■Main Specifications
Measuring system: Infrared reflection type
Measuring wavelength:Up to 10 wavelengths
Measuring scope: Up to 4 constituents
Computing function: Ratio calculation for 2-color or 3-color, and multiple regression calculation
Calibration curve: Linear, quadratic, cubic and multiple regression line
The temperature sensors filled with high-purity magnesium oxide in protec-
tive tube provide excellent response along with vibration resistance and cor-
rosion resistance.
THYRISTOR REGULATORS
SINGLE/THREE-PHASE
THYRISTOR REGULATORS
JU/JW SERIES
THYRISTOR REGULATORS
JJ SERIES
ELECTRIC HEATERS CONTROL AND TEMPERATURE SENSORS
11
SHEATH THERMOCOUPLES
SHEATH RESISTANCE THERMOMETERS
●Compact, lightweight and high-density installation
●Phase-angle firing and zero-cross firing are selectable
●Setting communication unit displays voltage, current,
power and heater measurement values, and enables
parameter setup and operation selection
●Prepare heater disconnection alarm and current limiter
■Main Specifications
JU
Phase: Single phase
Rated voltage: 100, 110, 120, 200, 220, 240, 380,
400, 440V AC (to be specified)
Rated frequency: 50/60Hz (automatic selection)
Rated current: 10, 20, 30, 50, 75, 100, 150, 200, 250,
300, 400, 500, 750, 1000A (to be specified)
JW
Phase: Three phase
Rated voltage: 200V AC (200V/220V/240V selectable)
400V AC (380V/400V/440V selectable)
Rated frequency: 50/60Hz (automatic selection)
Rated current: 10, 20, 30, 50, 75, 100, 150, 200, 250, 300,
400, 500, 750, 1000A (to be specified)
SINGLE-PHASE
THYRISTOR REGULATORS
JB SERIES
■Main Specifications
Phase: Single-phase
Rated voltage: 100 to 120 VAC and 200 to 240 VAC
(selection by terminals)
Rated frequency: 50/60Hz (automatic selection)
Rated current: 20, 30, 40, 50, 75, 100A (to be specified)
Input signal: 4 to 20mADC, 1 to 5VDC or on-off contact
Output range: 0 to 98% of rated voltage
Minimum load current:
0.5A (at 98% output)
Applicable loads: Resistive load
Inductive load (transformer primary control
and phase control system only)
Control system: Phase-angle firing and zero-cross firing
(selectable)
Built-in Setting
Communication
display unit
The JU/JW series of thyristor regulators fea-
ture a compact size and light weight and en-
able high-density installation. Their methods
of control include two ways, the
phase-angle control and zero-
cross control systems. In the
phase-angle control systems, the
voltage, current and power feed-
back control types and a type with-
out feedback control are available
for the selection of an optimum
type according to the characteris-
tics of the heater used.
The small and lightweight thyristor regu-
lators for single-phase loads are char-
acterized with high panel installation
density.
Two control systems, a phase-angle fir-
ing system for continuous power con-
trol and a zero-cross firing system, are
built-in and selectable for various applications and power
environment.
The applications include small electric furnaces, calibra-
tion bath, casting dies heating and heating units for labo-
ratory use.
■Main Specifications
Thermocouples
Class: JIS 1 (class 0.4), 2 (class 0.75)
Element: K, J, E, T, N, Chino Arroy B (NB), X (XL)
Measuring temperature: -200 to 1050ºC
Protective tube diameter:
0.15,0.3, 0.5, 1.0, 1.6, 3.2, 4.8, 6.4, 8.0mmφ
Protective tube length: 300, 500, 750, 1000, 1500, 2000mm∼
Protective tube material: SUS316, SUS310S, NCF600
J, E, T...SUS316
(Protection tube of 0.3 and 0.5mmφ
: only available on K element and NCF600)
Resistance thermometers
Class: JIS A, B
Element: Pt100, JPt100, 3-wire
Nominal current: 2mA, 1mADC
Measuring temperature: -200 to 500ºC
Protection tube diameter: 3.2, 4.8, 6.4, 8.0mmφ
Protection tube length: 300, 500, 750, 1000, 1500, 2000mm
Protection tube material: SUS316
●Display voltage/current/power
& heater resistance
●Easy setting for parameter such
as elevation, soft-start
and so on
●Outputs data to PLC or PC with
communication
function (option) and parameter can be changed from
host unit
●Alarm contents are displayed when alarm is activated.
Output alarm contact from AL1 and AL2 depending on
the situation
●Phase-angle firing and zero-cross firing are selectable
●Switching between feedback and non-feedback of
voltage, current and power in phase angle firing are
possible
●Switching between fixed time base and variable time
base in zero cross firing are possible
●Heater disconnection alarm and current limiter is
available as option
●CE marking will be conformed.
TRACEABILITY
STANDARD SENSORS AND RADIATION THERMOMETERS
12
SMALL TYPE
LOW TEMPERATURE
COMPARATIVE
CALIBRATION
EQUIPMENT
FIXED POINT
BLACKBODY
FURNACE
STANDARD RESISTANCE THERMOMETER
R800 SERIES
STANDARD THERMOCOUPLE
C800 SERIES
The standard platinum resistance thermometers, which have
been commercialized under the guidance of National Re-
search Laboratory of Metrology, conform to International Tem-
perature Scale, 1990 (ITS-90).
The standard thermocouples are for calibration of thermocou-
ples.
Three kinds of S type, R type and B type thermocouples are
available.
●From vapor point of helium to freezing point of silver
■Main Specifications ■Main Specifications
Measuring range:13K to 30ºC (R800-0), 90K to 661ºC (R800-2)
0 to 962ºC (R800-3, 3L), 4K to 0ºC (R800-4)
●Temperature-thermoelectromotive force tables are
prepared on request.
Element diameter:φ0.5mm
Measuring range: Maximum 1100ºC(S, R)
Maximum 1554ºC(B)
Realize low temperature calibration at -100ºC
and compact & light weight body.
For on-site calibration of resistance thermometer
and thermocouple!
Calibration Temperature Range : -100 to 50
ºC (KT-H503)
-30 to 155ºC (
KT-H504)
-20 to 155ºC (
KT-H504S) KT-H503 KT-H504
KT-H504S
KT-H SERIES
●Realization of a good plateau by the improvement of the
temperature distribution
●Lineup In to Cu point
●Changeable to other fixed points by cell exchange easily
●Compact size (184 X 370 X 360mm), weight (13kg)
Fixed point black body furnace, model :
IR-R0A is a highly precise fixed point
black body furnace that can use for the
temperature standard for radiation therm-
ometer.
IR-R0A has 6 kinds of fixed point cell
from In (157ºC) in low temperature to
Cu(1085ºC) in high temperature.
Fixed point cell In point: 156.60
ºC
, Sn point : 231.93
ºC
Zn point : 419.53
ºC
, Al point : 660.32
ºC
Ag point : 961.78
ºC
, Cu point : 1084.62
ºC
■Main Specifications
IR-ROA SERIES STANDARD RADIATION THERMOMETER
IR-RST SERIES
Standard Radiation Thermometer
IR-RST series has been devel-
oped under collaborative research
with the National Metrology Insti-
tute of Japan (NMIJ), which is ap-
plicable for traceability of calibrat-
ing conventional radiation therm-
ometers.
Detecting element: Silicon Photo Diode, InGaAs Photo Diode
Measuring range: 400 to 2000
ºC
(0.9μm) 3-step selection
1000 to 3000
ºC
(0.65μm) 3-step selection
150 to 1100
ºC
(1.6μm) 3-step selection
■Main Specifications
HEAT PIPE TYPE FIXED POINT
CALIBRATION FURNACE
KT-F116
KT-F116 conducts fixed point calibra-
tion of resistance thermometer and
thermocouple by realizing freezing
point of Al and Ag, combing with
shield fixed point cell.
Furnace operating temperature range: 600 to 1000℃
Fixed point Metal: Al and Ag
■Main Specifications
COMPARISON
BLACKBODY
FURNACE
The comparison type blackbody furnaces
were developed jointly with National Re-
search Laboratory of Metrology for calibra-
tion of radiation thermometers and have
large aperture diameters.
Temperature range: 50 to 450ºC (low temperature type)
200 to 1050ºC (medium temperature type)
800ºC to 1450ºC (high temperature type)
Aperture diameter: φ60mm (low temperature type)
φ50mm (medium temperature type)
φ30mm (high temperature type)
■Main Specifications
MODELS
IR-R24,IR-R26,IR-R27
■Main Specifications
●Na heat pipe is used for soaking
pipe and realize 0.1
ºC
p-p/200mm.
●No need of gas
exchange,adopts shield fixed point cell, which is easy to
use.
●Able to maintain more than 10 hours of plateau by
adjusting furnace temperature.
http://www.chino.co.jp/
CHINA USA
ASIA
HEAD OFFICE
TOKYO
HEAD OFFICE
TOKYO
DOMESTIC FACTORY
LOS ANGELES
CHICAGO
KOREA
INDIA THAILAND
SHANGHAI
JIANGSU
YAMAGATA FUJIOKA KUKI
32-8, KUMANO-CHO, ITABASHI-KU, TOKYO 173-8632
Telephone : 81-3-3956-2171 Facsimile : 81-3-3956-0915
E-mail : inter@chino.co.jp
32-8, KUMANO-CHO, ITABASHI-KU, TOKYO 173-8632
Telephone : 81-3-3956-2171 Facsimile : 81-3-3956-0915
E-mail : inter@chino.co.jp
Cat.No. CGE-05-12 May.'16 Printed in Japan ⃝
I
