Grove B4 B5 B7 Ball Valve Brochure
User Manual: Resource Library
Open the PDF directly: View PDF 
.
Page Count: 32
| Download | |
| Open PDF In Browser | View PDF |
GROVE B4, B5, and B7 Side-Entry Ball Valves Table of Contents GROVE B4, B5, AND B7 SIDE-ENTRY BALL VALVES Features and Benefits Applications...................................................................................................1 GROVE B4 Design Features ......................................................................................2 Materials Specifications............................................................................4 Optional Features....................................................................................5 Special Applications.................................................................................6 GROVE B4-B4.D Valve Assembly and Cross Section............................................................7 Dimensions and Weights.........................................................................8 GROVE B5 Design Features.......................................................................................11 Valve Assembly and Cross Section............................................................14 Dimensions and Weights.........................................................................15 GROVE B7 Design Features.......................................................................................21 GROVE B7.B Valve Assembly and Cross Section............................................................22 GROVE B7.1 AND B7.B Dimensions and Weights.........................................................................23 Quality System............................................................................................24 Qualification Testing...................................................................................25 Services for Valves and Actuation.............................................................26 Trademark Information..............................................................................27 1 GROVE B4, B5, & B7 Side-entry Ball Valves FEATURES AND BENEFITS Applications Cameron’s Valves & Measurement business segment is a leading provider of valves, valve automation, and measurement systems to the oil and gas industry. GROVE split-body side-entry ball valves are manufactured in a wide range of diameters and pressure classes. We provide large-diameter valves for use in natural gas, LNG, crude oil, and refined products transmission lines as well as in many other general industrial applications. In the standard versions, the valves are specified for transmission pipelines, pumping, compression and reinjection units, offshore platforms, onshore terminals, pig traps, measuring stations, and surge-relief skids. Rigorously tested, field-proven, and backed by our services team, Cameron’s GROVE® valves are among the best known valves in the world. These valves also can be built for speciality applications, such as subsea installations and LNG plants. Split-body construction allows the use of forged materials in various grades of carbon steel, stainless steel, and high alloys, equipping the valves for some of the most severe service conditions. Size B4 ● 2 ASME CLASS 150 300 400 600 900 1500 2500 (in.) (mm) 1-1/2 (40) ● ● ● ● ● ● ▲ 2 (50) ● ● ● ● ● ● ▲ 3 (80) ● ● ● ● ● ● ▲ 4 (100) ● ● ● ● ● ● ▲ 6 (150) ■ ■ ■ ■ ■ ■ ▲ 8 (200) ■ ■ ■ ■ ■ ■ ◆ 10 (250) ■ ■ ■ ■ ■ ■ ◆ 12 (300) ■ ■ ■ ■ ■ ■ ◆ 14 (350) ■ ■ ■ ■ ■ ■ ◆ 16 (400) ■ ■ ■ ■ ■ ■ ◆ 18 (450) ■ ■ ■ ■ ■ ■ ◆ 20 (500) ■ ■ ■ ■ ■ ■ ◆ 22 (550) ■ ■ ■ ■ ■ ■ 24 (600) ■ ■ ■ ■ ■ ■ 26 (650) ■ ■ ■ ■ ■ ■ 28 (700) ■ ■ ■ ■ ■ ■ 30 (750) ■ ■ ■ ■ ■ ■ 32 (800) ■ ■ ■ ■ ■ ■ 34 (850) ■ ■ ■ ■ ■ ■ ■ 36 (900) ■ ■ ■ ■ ■ 40 (1000) ■ ■ ■ ■ ■ 42 (1050) ■ ■ ■ ■ ■ 46 (1150) ■ ■ ■ ■ ■ ■ 48 (1200) ■ ■ ■ ■ 56 (1400) ■ ■ ■ ■ 60 (1500) ■ ■ ■ ■ B5 ■ B7.1 ▲ B7.B ◆ GROVE B4 DESIGN FEATURES Standard Features Options The standard design valve code is B4.D. • Double-barrier stem seals (the upper seal can be replaced with the valves in-line, under pressure, with the ball in the closed position) According to the design impact of the optional features, the valve code may change to B4.B, B4.C, etc. • Short coupled trunnions reduce unit bearing loads and operating torque B4 – ALL TYPES • PTFE various grades of reinforced gaskets, spring energized, for stem and seat sealing • Antistatic device • Factory-positioned external stops • Metal-to-metal seats • Stem separated from the ball; anti-blowout design; side load on stem • Plastic polymer insert for seat sealing • Double-sealing barrier in both directions (DPE) for ASME Classes 600, 900, and 1500; body relief valve for overpressure due to liquid thermal expansion • Self-relieving seats for ASME Classes 150 and 300 • Double block-and-bleed capabilities • Metal-backed, self-lubricating PTFE sleeve bearing and thrust washers reduce torque and extend service life • Explosive decompression-resistant seals • Nickel plating for trim parts • Fire-safe graphite rings for protection against external leakage B4.B TYPE When the valve design includes one or more of the following variations with respect to the standard design, the denomination becomes B4.B. • Triple-barrier stem seals; upper stem seal O-ring replaceable with pressure in-line with the ball in the closed position • Self-relieving seats B4.C TYPE This version of the B4 valves (in ASME Classes 600, 900, and 1500) features: • O-ring seat seal • Double-sealing barrier in both directions (DPE) and body pressure relief valve 3 Body Construction Ball Position The body is made of three forged parts, and the bolted construction allows disassembly in the field for repairs. The body drain is located in the lowest part of the body cavity and consists of a 1/4" NPT drain valve with safety plug. Graphite rings are provided for compliance with API 6FA and BS 6755 Part 2 fire-safe standards. For valves normally mounted with lever, the ball open and closed positions are ensured by corresponding stops on the bearing housing. The lever position parallel to the line flow means the valve is open. For valves with gears or actuators, the stops are set at the factory as primary stops. An “open/closed” indicator also is provided. Stem Construction The stem function is to transmit torque and to absorb the line pressure thrust together with the trunnion. The stem of Cameron's GROVE B4 valves has an anti-blowout design and incorporates a double-barrier system. The pressure thrust on the stem is supported by a thrust washer in antifriction material. Seat Seal The soft sealing between the seat and the ball is achieved by a plastic insert on B4.B, B4.D valves and by an O-ring on B4.C valves. The block-and-bleed and double block-and-bleed capabilities are available as per API 6D definition on all types of B4 valves. Self-relieving seats are standard on all B4.B, B4.C, and B4.D ASME Classes 150 and 300. Independent sealing on upstream and downstream seats is available on B4.C and B4.D ASME Classes 600, 900, and 1500. 4 MATERIALS SPECIFICATIONS Materials Selection Duplex Stainless Steels Metallurgy The design of the valve also depends on the materials of construction selected. On duplex (22 Cr to 2 Ni) and superduplex (25 Cr to 5 Ni) stainless steels, corrosion-resistance qualification check can be as follows: After examination of service conditions, the selection criteria are based on the verification of the physical and chemical characteristics of the materials or product. For the soft sealing (O-rings, inserts, and lip seal gaskets), the guidelines to be followed are relevant for hardness, tensile strength, modulus, compression set, swelling, and fluid suitability. The process is qualified so that the final thickness after machining can verify the chemical composition as per the relevant ASTM standard. The final check is carried out by the liquid penetrant method. Weld Overlays Sealing areas and other critical parts of the valve can be weld overlayed in case of corrosive service. More frequently used materials are AISI 316L and Alloy 625. • Chloride corrosion as per ASTM G48 (104° F or 40° C, 72 hours) • Cracking as per ASTM G36 (302° F or 150° C, 500 hours) • Pitting corrosion PRE = 33 min. for duplex, 40 min. for superduplex • Ferrite content 40% to 60%, as per ASTM E562 NACE Requirements On request, GROVE side-entry ball valves can be supplied in accordance with NACE MR0175. Severe Wet Sour Gas Service In addition to NACE MR0175, the additional qualifications can be: • Sulfur ≤ 0.015% • Hydrogen-induced cracking as per NACE TM-02-84 (96 hours) • Sulfide stress corrosion cracking as per NACE TM-0177 (720 hours) 5 OPTIONAL FEATURES Metal-to-Metal Seats Stem Extensions The contact area between the seats and the ball can be completely metallic. This feature is required when tight sealing is needed and the standard soft seal is no longer suitable due to the unfavorable combination of pressure, temperature, and chemical composition of the medium and/or when solid particles are present and when operating conditions prevail. GROVE ball valves can be provided with optional stem extensions to permit buried or underground installations in remote or inaccessible areas. In case of metal-to-metal seats, the ball and seats coating can be obtained by means of various materials and processes, such as: When ordering extensions, please specify the distance required from the valve centerline to the handwheel centerline. When used for buried service, the stem extensions can be furnished watertight, and the piping of the grease injection system also will be extended. EXTENSION LENGTH • Electroless nickel plating • High-velocity application of carbide powder When utilizing the metallic seats, it is necessary to verify the structure of the stem/ball coupling and the actuator choice, as there is an increase in the valve torque. Transition Pieces Other Cameron can weld transition pieces to the valve during the manufacturing process. Transition can be supplied by the customer or by Cameron to suit the customer’s specifications. Upon request, the valve can be furnished with specific adjustments for the installation with the horizontal stem. Cameron offers a wide variety of weld procedures in accordance with international standards. 6 Also upon request, the wrenches, gearboxes, and actuators can be supplied with locking devices to suit the customer’s specifications. SPECIAL APPLICATIONS “S” Design for Subsea Service “L” Design For Low-temperature Service The “S” valves are the subsea versions of the B4, B5, and B7 ball valves, specifically designed to suit subsea service conditions. For certain gas treatment processes (e.g., LNG) and blowdown conditions, the valve must be able to limit the leakage within specified value and to ensure the maneuverability at a low temperature. The B4-L, B5-L, and B7-L valves are suitable for temperatures down to -184° F ( -120° C). The “S” design takes into consideration the restrictive criteria used in the definition of safety coefficients relative to both pressure-retaining components and the stem connection between the valve and actuator, making the “S” valve suitable for EDS service. The critical internal sealing surfaces are protected from corrosion resistance by the overlay, generally dictated by customer specifications and checked by chemical analysis of test specimens and the part(s). The body is coated with special products and the body/ bonnet bolts are protected with special protective coatings and special sealing caps. The stem and external sealing areas are protected with additional seawater sealing gaskets. The “S” valve is designed to be reliable and to provide optimum service with reduced maintenance. It usually is installed on modular rigs placed on the seafloor, complete with necessary components. When necessary, substitution or complete removal of these modules is possible. The valves are referred to the respective standard types, but materials, parts dimensions, surface finishing, gaskets, and stem connections are specifically designed to suit low temperatures. Epoxy-Phenolic Internal Coating Cameron has developed a technology for anti-corrosive internal coatings. The products have been designed for oil brine, seawater and drinking water service, sour and corrosive applications. The final thickness can be 180 to 350 microns. Hydrostatic shell testing is conducted before and after coating and thickness and holiday testing records are maintained. 7 GROVE B4-B4.D VALVE ASSEMBLY AND CROSS SECTION Item 1 2 4 5 7 8 9 10 20 31 32 8 Description Body Closure Ball Stem Wrench Unit Closure O-ring Gland Plate Gland Bushing Trunnion Bearing Body Stud Body Stud Nut Item 39 50 80a 118 119 121 122 131 132 134 135 136 Description Drain Valve Seeger Ring Lower Trunnion Fire-safe Seal Standard Seat Ring Seat Insert Closure Fire-safe Seal Gland Plate Fire-safe Seal Gland Plate Capscrew Bearing Housing Capscrew Stem O-ring Seat Gasket O-ring Gland Plate O-ring Item 150 153 165 168 169 170 180 186 189 239 544 Description Upper Thrust Washer Drive Pin Bearing Housing Stem Bearing Lower Trunnion Trunnion O-ring Lower Trunnion Capscrew Stem Fire-safe Packing Gland Vent Spring Washer Stop Collar DIMENSIONS AND WEIGHTS ASME CLASS 150 ASME CLASS 300 Size (in.) Thread T (in.) Depth Flange Holes (No.) 1-1/2 2 3 4 1/2 UNC 5/8 UNC 5/8 UNC 5/8 UNC 13/16 15/16 15/16 15/16 4 4 4 8 ASME CLASS 150 SIZE in. D (mm) 1-1/2 (40) 2 x 1-1/2 x 2 (50 x 40 x 50) 2 (50) 3x2x3 (80 x 50 x 80) 3 (80) 4x3x4 (100 x 80 x 100) 4 (100) 6x4x6 (150 x 100 x 150) 1-1/2 (38) 1-1/2 (38) 2 (51) 2 (51) 3 (76) 3 (76) 4 (102) 4 (102) E F WE RF RTJ 7-1/2 (191) 8-1/2 (216) 8-1/2 (216) 11-1/8 (283) 11-1/8 (283) 12 (305) 12 (305) 18 (457) 6-1/2 (165) 7 (178) 7 (178) 8 (203) 8 (203) 9 (229) 9 (229) 15-1/2 (394) 7 (178) 7-1/2 (191) 7-1/2 (191) 8-1/2 (216) 8-1/2 (216) 9-1/2 (241) 9-1/2 (241) 16 (406) WE RF RTJ 7-1/2 (191) 8-1/2 (216) 8-1/2 (216) 11-1/8 (283) 11-1/8 (283) 12 (305) 12 (305) 18 (457) 7-1/2 (191) 8-1/2 (216) 8-1/2 (216) 11-1/8 (283) 11-1/8 (283) 12 (305) 12 (305) 15-7/8 (403) 8 (203) 9-1/8 (232) 9-1/8 (232) 11-3/4 (298) 11-3/4 (298) 12-5/8 (321) 12-5/8 (321) 16-1/2 (419) G S H L A K M WEIGHT lb (kg) WE RF/RTJ 3-7/8 (98) 3-7/8 (98) 4-1/8 (105) 4-1/8 (105) 5-1/8 (130) 5-1/8 (130) 6-1/8 (155) 6-1/8 (155) 4-1/4 (108) 4-1/4 (108) 4-5/8 (118) 4-5/8 (118) 5-5/8 (143) 5-5/8 (143) 6-5/8 (168) 6-5/8 (168) 5 (127) 5 (127) 5-5/8 (143) 5-5/8 (143) 7-3/4 (197) 7-3/4 (197) 9-3/8 (238) 9-3/8 (238) 7/8 (22) 7/8 (22) 7/8 (22) 7/8 (22) 1-1/8 (28) 1-1/8 (28) 1-1/8 (28) 1-1/8 (28) 10-3/4 (273) 10-3/4 (273) 12-5/8 (321) 12-5/8 (321) 16-1/2 (419) 16-1/2 (419) 20-1/4 (514) 20-1/4 (514) - - - 29 (13) 31 (14) 37 (17) 53 (24) 84 (38) 86 (39) 123 (56) 152 (69) 31 (14) 40 (18) 51 (23) 60 (27) 95 (43) 104 (47) 146 (66) 161 (73) F G S H L A K M WEIGHT lb (kg) WE RF/RTJ 29 (13) 31 (14) 37 (17) 53 (24) 88 (40) 90 (41) 128 (58) 165 (75) 40 (18) 44 (20) 51 (23) 75 (34) 117 (53) 123 (56) 170 (77) 223 (101) ASME CLASS 300 SIZE in. D (mm) 1-1/2 (40) 2 x 1-1/2 x 2 (50 x 40 x 50) 2 (50) 3x2x3 (80 x 50 x 80) 3 (80) 4x3x4 (100 x 80 x 100) 4 (100) 6x4x6 (150 x 100 x 150) 1-1/2 (38) 1-1/2 (38) 2 (51) 2 (51) 3 (76) 3 (76) 4 (102) 4 (102) E 3-7/8 (98) 3-7/8 (98) 4-1/8 (105) 4-1/8 (105) 5-1/8 (130) 5-1/8 (130) 6-1/8 (155) 6-1/8 (155) 4-1/4 (108) 4-1/4 (108) 4-5/8 (118) 4-5/8 (118) 5-5/8 (143) 5-5/8 (143) 6-5/8 (168) 6-5/8 (168) 5 (127) 5 (127) 5-5/8 (143) 5-5/8 (143) 7-3/4 (197) 7-3/4 (197) 9-3/8 (238) 9-3/8 (238) 7/8 (22) 7/8 (22) 7/8 (22) 7/8 (22) 1-1/8 (28) 1-1/8 (28) 1-1/8 (28) 1-1/8 (28) 10-3/4 (273) 10-3/4 (273) 14-5/8 (372) 14-5/8 (372) 22-3/8 (568) 22-3/8 (568) 26-1/8 (664) 26-1/8 (664) - - - Flanges in accordance with ASME B16.5 Butt welding ends according to ASME B16.25 Shaded bore sizes (D) according to API 6D Outlined end-to-end dimensions (E) according to ASME B16.10 Shaded end-to-end dimensions (E) according to API 6D 9 DIMENSIONS AND WEIGHTS (CONT.) ASME CLASS 400 ASME CLASS 600 D ASME CLASS 400 SIZE in. D (mm) 1-1/2 (40) 2 x 1-1/2 x 2 (50 x 40 x 50) 2 (50) 3x2x3 (80 x 50 x 80) 3 (80) 4x3x4 (100 x 80 x 100) 4 (100) 6x4x6 (150 x 100 x 150) 1-1/2 (38) 1-1/2 (38) 2 (51) 2 (51) 3 (76) 3 (76) 4 (102) 4 (102) E F WE RF RTJ 9-1/2 (241) 11-1/2 (292) 11-1/2 (292) 14 (356) 14 (356) 16 (406) 16 (406) 19-1/2 (495) 9-1/2 (241) 11-1/2 (292) 11-1/2 (292) 14 (356) 14 (356) 16 (406) 16 (406) 19-1/2 (495) 9-1/2 (241) 11-5/8 (295) 11-5/8 (295) 14-1/8 (359) 14-1/8 (359) 16-1/8 (410) 16-1/8 (410) 19-5/8 (499) WE RF RTJ 9-1/2 (241) 11-1/2 (292) 11-1/2 (292) 14 (356) 14 (356) 17 (432) 17 (432) 22 (559) 9-1/2 (241) 11-1/2 (292) 11-1/2 (292) 14 (356) 14 (356) 17 (432) 17 (432) 22 (559) 9-1/2 (241) 11-5/8 (295) 11-5/8 (295) 14-1/8 (359) 14-1/8 (359) 17-1/8 (435) 17-1/8 435) 22-1/8 (562) G S H L A K M WEIGHT lb (kg) WE RF/RTJ 3-7/8 (98) 3-7/8 (98) 4-1/8 (105) 4-1/8 (105) 5-1/8 (130) 5-1/8 (130) 6-1/8 (155) 6-1/8 (155) 4-1/4 (108) 4-1/4 (108) 4-5/8 (118) 4-5/8 (118) 5-5/8 (143) 5-5/8 (143) 6-5/8 (168) 6-5/8 (168) 5 (127) 5 (127) 5-5/8 (143) 5-5/8 (143) 7-3/4 (197) 7-3/4 (197) 9-3/8 (238) 9-3/8 (238) 7/8 (22) 7/8 (22) 7/8 (22) 7/8 (22) 1-1/8 (28) 1-1/8 (28) 1-1/8 (28) 1-1/8 (28) 10-3/4 (273) 10-3/4 (273) 14-5/8 (372) 14-5/8 (372) 22-3/8 (568) 22-3/8 (568) 26-1/8 (664) 26-1/8 (664) - - - 30 (13) 33 (15) 41 (19) 56 (25) 93 (42) 103 (47) 146 (66) 179 (81) 43 (20) 49 (22) 56 (25) 80 (36) 123 (56) 146 (47) 198 (90) 279 (127) F G S H L A K M WEIGHT lb (kg) WE RF/RTJ 31 (14) 35 (16) 44 (20) 60 (27) 97 (44) 115 (52) 192 (87) 192 (87) 46 (21) 53 (24) 62 (28) 86 (39) 130 (59) 168 (76) 335 (152) 335 (152) ASME CLASS 600 SIZE in. D (mm) 1-1/2 (40) 2 x 1-1/2 x 2 (50 x 40 x 50) 2 (50) 3x2x3 (80 x 50 x 80) 3 (80) 4x3x4 (100 x 80 x 100) 4 (100) 6x4x6 (150 x 100 x 150) 1-1/2 (38) 1-1/2 (38) 2 (51) 2 (51) 3 (76) 3 (76) 4 (102) 4 (102) E 3-7/8 (98) 3-7/8 (98) 4-1/8 (105) 4-1/8 (105) 5-1/8 (130) 5-1/8 (130) 6-1/8 (155) 6-1/8 (155) 4-1/4 (108) 4-1/4 (108) 4-5/8 (118) 4-5/8 (118) 5-5/8 (143) 5-5/8 (143) 6-5/8 (168) 6-5/8 (168) 5 (127) 5 (127) 5-5/8 (143) 5-5/8 (143) 7-3/4 (197) 7-3/4 (197) 9-3/8 (238) 9-3/8 (238) 7/8 (22) 7/8 (22) 7/8 (22) 7/8 (22) 1-1/8 (28) 1-1/8 (28) 1-1/8 (28) 1-1/8 (28) 11-7/8 (302) 11-7/8 (302) 16-7/8 (429) 16-7/8 (429) 26-1/4 (667) 26-1/4 (667) 30-1/8 (765) 30-1/8 (765) - - Flanges in accordance with ASME B16.5 Butt welding ends according to ASME B16.25 Shaded bore sizes (D) according to API 6D Outlined end-to-end dimensions (E) according to ASME B16.10 Shaded end-to-end dimensions (E) according to API 6D 10 - ASME CLASS 900 AND 1500 ASME CLASS 900 SIZE in. D (mm) 1-1/2 (40) 2 x 1-1/2 x 2 (50 x 40 x 50) 2 (50) 3x2x3 (80 x 50 x 80) 3 (80) 4x3x4 (100 x 80 x 100) 4 (100) 6x4x6 (150 x 100 x 150) 1-1/2 (38) 1-1/2 (38) 2 (51) 2 (51) 3 (76) 3 (76) 4 (102) 4 (102) E F WE RF RTJ 12 (305) 14-1/2 (368) 14-1/2 (368) 15 (381) 15 (381) 18 (457) 18 (457) 24 (610) 12 (305) 14-1/2 (368) 14-1/2 (368) 15 (381) 15 (381) 18 (457) 18 (457) 24 (610) 12 (305) 14-5/8 (372) 14-5/8 (372) 15-1/8 (359) 15-1/8 (359) 18-1/8 (460) 18-1/8 (460) 24-1/8 (613) WE RF RTJ 12 (305) 14-1/2 (368) 14-1/2 (368) 18-1/2 (470) 18-1/2 (470) 21-1/2 (546) 21-1/2 (546) 27-3/4 (705) 12 (305) 14-1/2 (368) 14-1/2 (368) 18-1/2 (470) 18-1/2 (470) 21-1/2 (546) 21-1/2 (546) 27-3/4 (705) 12 (305) 14-5/8 (372) 14-5/8 (372) 18-5/8 (473) 18-5/8 (473) 21-5/8 (549) 21-5/8 (549) 28 (711) G S H L 4 (102) 4 (102) 4-1/2 (114) 4-1/2 (114) 5-5/8 (143) 5-5/8 (143) 6-7/8 (175) 6-7/8 (175) 4-1/2 (114) 4-1/2 (114) 4-7/8 (124) 4-7/8 (124) 6-1/8 (156) 6-1/8 (156) 7-1/2 (191) 7-1/2 (191) 5-1/8 (130) 5-1/8 (130) 6-3/8 (162) 6-3/8 (162) 8-3/8 (213) 8-3/8 (213) 11-1/2 (292) 10-1/4 (260) 7/8 (22) 7/8 (22) 7/8 (22) 7/8 (22) 1-1/8 (28) 1-1/8 (28) 2-1/8 (54) 2-1/8 (54) 13-1/2 (343) 13-1/2 (343) 22 (559) 22 (559) 35-7/8 (911) 35-7/8 (911) - F G S H L A K 10-7/8 23-5/8 (276) (600) 10-7/8 23-5/8 (276) (600) M WEIGHT lb (kg) WE RF/RTJ 1-3/4 (44) 1-3/4 (44) 44 (20) 49 (22) 77 (35) 108 (49) 157 (71) 159 (72) 353 (160) 357 (162) 68 (31) 95 (43) 130 (59) 143 (65) 187 (85) 240 (109) 390 (177) 489 (222) M WEIGHT lb (kg) WE RF/RTJ 44 (20) 49 (22) 77 (35) 108 (49) 179 (81) 185 (84) 355 (161) 366 (166) 68 (31) 95 (43) 130 (59) 168 (76) 240 (109) 311 (141) 399 (181) 628 (285) ASME CLASS 1500 SIZE in. D (mm) 1-1/2 (40) 2 x 1-1/2 x 2 (50 x 40 x 50) 2 (50) 3x2x3 (80 x 50 x 80) 3 (80) 4x3x4 (100 x 80 x 100) 4 (100) 6x4x6 (150 x 100 x 150) 1-1/2 (38) 1-1/2 (38) 2 (51) 2 (51) 3 (76) 3 (76) 4 (102) 4 (102) E 4 (102) 4 (102) 4-1/2 (114) 4-1/2 (114) 5-5/8 (143) 5-5/8 (143) 6-7/8 (175) 6-7/8 (175) 4-1/2 (114) 4-1/2 (114) 4-7/8 (124) 4-7/8 (124) 6-1/8 (156) 6-1/8 (156) 7-1/2 (191) 7-1/2 (191) 5-1/8 (130) 5-1/8 (130) 6-3/8 (162) 6-3/8 (162) 8-3/8 (213) 8-3/8 (213) 12-1/4 (311) 10-1/4 (260) 7/8 (22) 7/8 (22) 7/8 (22) 7/8 (22) 2-1/8 (54) 2-1/8 (54) 2-1/8 (54) 2-1/8 (54) 15-7/8 (403) 15-7/8 (403) 24-1/4 (616) 24-1/4 (616) - A 6-3/4 (171) 6-3/4 (171) 10-7/8 (276) 10-7/8 (276) K 11-3/4 (298) 11-3/4 (298) 23-5/8 (600) 23-5/8 (600) 1-1/4 (32) 1-1/4 (32) 1-3/4 (44) 1-3/4 (44) Flanges in accordance with ASME B16.5 Butt welding ends according to ASME B16.25 Shaded bore sizes (D) according to API 6D Outlined end-to-end dimensions (E) according to ASME B16.10 Shaded end-to-end dimensions (E) according to API 6D 11 GROVE B5 DESIGN FEATURES Standard Features • Double-barrier stem seals • Triple-barrier stem seals • Stem separated from the ball; anti-blowout design; no side load on the stem • Emergency grease fitting for stem • Bearing blocks absorb the pressure load on the ball • Primary metal-to-metal seal and secondary protected synthetic O-ring seal • Double-sealing barrier in both directions (DPE) • Body relief valve for overpressure due to liquid thermal expansion • Built-in sealant injection system for emergency seat seal • Metal-backed, self-lubricating PTFE sleeve bearing and thrust washers reduce torque and extend service life • Nickel plating for trim parts • Trunnion mounted ball for ease of operation at high pressure • Large-diameter, short coupled trunnions to reduce unit bearing loads and operating torque • Bolted construction permits disassembly in the field for repairs • Integral stop in the adapter plate for a permanent reference to open and closed position • Antistatic device 12 Options • Self-relieving seats • Plastic polymer O-ring or insert for primary seat sealing • Double block-and-bleed capabilities • PTFE various grades of reinforced gaskets, spring energized, for stem and seat sealing • Metal-to-metal seat • Explosive decompression-resistant seal DESIGN FEATURES (CONT.) Body Construction Torque The body is made of three forged parts, and the bolted construction allows disassembly in the field for repairs. The bolts threads areas are per ISO metric or ASME imperial, depending on the market request. The tightening of the bolts is made by hydraulic tools with a predetermined torque. The body drain is located in the lowest part of the body cavity and consists of an NPT drain valve with safety plug. Cameron's GROVE B5 valve's low operating torque is due to a combination of factors: Stem Construction The stem of Cameron's GROVE B5 valve is separated from the ball and is connected to the upper ball trunnion by steel pins. Bearing blocks are located on the upper and lower ball trunnions, which absorb all the pressure load on the ball. The stem is a free member and carries no side thrust.The absence of this side load and friction drag on the stem ensures lower operating torque and long service life. The stem is sealed by means of two O-rings. If leakage should ever occur through both stem seals, the outer O-ring can be replaced with the valve in the line, under pressure with the ball in the closed position. With no pressure in-line, it is possible to remove the gland plate for replacement of both primary and outer stem O-rings. The stem also can be removed and replaced if necessary. • The design of the stem, which is separated from the ball • The side loads, brought on by differential pressure, are absorbed by two (upper and lower) rigid bearing retainers and large-diameter, short coupled trunnions to reduce unit bearing loads • The metal-backed, self-lubricating sleeve bearing and the thrust washers reduce the torque and extend service life Ball Position The ball's open and closed positions are ensured by corresponding stops on the adapter plate. The valve normally is mounted with the actuator stops or the gear stops set at the factory as primary stops. An “open/closed” indicator also is provided. 13 Seat Seals The GROVE B5 seat design ensures double-barrier sealing in both directions (the normal self-relieving seats are a simple barrier of sealing). The sealing is performed by both a primary metal-to-metal seal and a secondary protected O-ring seal. Double Piston Effect (DPE) The DPE seat design was invented and patented by Cameron’s GROVE team. The DPE seat design allows for both seats to seal with pressure acting from the same side of the valve. In the event one seat becomes damaged, the user has the added advantage of the opposite seat sealing. By means of this double barrier, the sealing is ensured regardless of the direction of the flow through the valve. 14 If the upstream seat (1) becomes damaged and leaks, the pressure entering the body cavity acts on the downstream seat (2), sealing the downstream seat tightly against the ball. Note: The DPE feature and the double block-and-bleed feature are not to be confused with one another. The initial seal, at extremely low pressure differential or vacuum conditions, is obtained with spring-loaded floating seats, which are free to move slightly along the longitudinal axis of the valve. Line pressure behind the seat ring supplements the seat spring load to force the seat tightly against the ball. VALVE ASSEMBLY AND CROSS SECTION Item 1 2 4 5 6b 6I 8 9 10 31 32 39 Description Body Closure Ball Stem Outer Seat Ring Inner Seat Ring Body O-ring Gland Plate Gland Bushing Body Stud Body Stud Nut Drain Valve Item 45 123 124 131 132 134 135 136 137 139 140 142 143 Description Grease Fitting Stem Key Stem Key Capscrew Gland Plate Capscrew Adapter Plate Capscrew Stem O-ring Seat O-ring Gland Plate O-ring Seal O-ring Seat Spring Pin Bearing Retainer Pin Spring Seat Lock Ring Item 146 148 149 150 151 152 153 154 160 172 176 178 189 Description Puller Bushing Bearing Retainer Bearing Upper Thrust Washer Lower Thrust Washer Spacer Drive Pin Relief Valve Adapter Plate Vent Plug U-cup Packing Check Valve Gland Vent 15 DIMENSIONS AND WEIGHTS ASME CLASS 150 ASME CLASS 150 SIZE in. D (mm) 6 (150) 8 (200) 10 (250) 12 (300) 14 (350) 16 (400) 18 (450) 20 (500) 22 (550) 24 (600) 26 (650) 28 (700) 30 (750) 32 (800) 34 (850) 36 (900) 40 (1000) 42 (1050) 46 (1150) 48 (1200) 56 (1400) 60 (1500) 6 (152) 8 (203) 10 (254) 12 (305) 13-1/4 (337) 15-1/4 (387) 17-1/4 (438) 19-1/4 (489) 21-1/4 (540) 23-1/4 (591) 25 (635) 27 (686) 29 (737) 30-3/4 (781) 32-3/4 (832) 34-1/2 (876) 38-1/2 (978) 40-1/4 (1022) 44 (1118) 46 (1168) 54-1/2 (1384) 57-1/2 (1461) E RF RTJ 18 457) 20-1/2 (521) 22 (559) 25 (635) 30 (762) 33 (838) 36 (914) 39 (991) 15-1/2 (394) 18 (457) 21 (533) 24 (610) 27 (686) 30 (762) 34 (864) 36 (914) 16 (406) 18-1/2 (470) 21-1/2 (546) 24-1/2 (622) 27-1/2 (699) 30-1/2 (775) 34-1/2 (876) 36-1/2 (927) (1) (1) (1) 45 (1143) 49 (1245) 53 (1346) 55 (1397) 60 (1524) 64 (1626) 68 (1727) 42 (1067) 45 (1143) 49 (1245) 51 (1295) 54 (1372) 58 (1473) 60 (1524) 42-1/2 (1080) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) Upon request Flanges in accordance with ASME B16.5 16 F WE (1) (1) (1) (1) (1) (1) 11-7/8 (302) 13-3/8 (340) 14-7/8 (378) 16-3/8 (416) 18-3/8 (467) 19-7/8 (505) 21-1/2 (546) 23-1/8 (587) 24-7/8 (632) 26-3/8 (670) 28-1/4 (718) 29-5/8 (753) 31-3/4 (806) 33-1/4 (845) 34-3/8 (873) 35-3/4 (908) 39-3/8 (1000) 40-3/4 (1035) 44-5/8 (1134) 46-3/8 (1178) 52-3/4 (1321) 56-3/8 (1432) G 8-1/2 (108) 9-7/8 (108) 11-5/8 (118) 13-1/2 (118) 14-5/8 (143) 16-1/4 (143) 18 (168) 19-3/8 (168) 21-1/8 (537) 22-1/2 (572) 24-1/2 (622) 25-7/8 (657) 27-1/2 (699) 29 (737) 30-7/8 (784) 32-3/8 (822) 35-5/8 (905) 38-1/8 (968) 42-1/2 (1080) 44-3/8 (1127) 50-3/8 (1280) 55-1/8 (1400) S 11-7/8 (302) 15-5/8 (397) 18-1/4 (464) 21-5/8 (549) 23 (584) 26-3/8 (670) 29-7/8 (759) 32-7/8 (835) 36-1/4 (921) 38-7/8 (988) 41-3/4 (1060) 44-3/4 (1137) 48-5/8 (1235) 51 (1295) 53-3/8 (1356) 56-3/4 (1441) 63-7/8 (1623) 67-3/8 (1711) 74-1/2 (1892) 77-1/2 (1969) 89-3/4 (2280) 96-3/8 (2448) H 2-3/4 (70) 2-3/4 (70) 2-3/4 (70) 2-3/4 (70) 3-3/4 (95) 3-3/4 (95) 4-1/2 (114) 4-1/2 (114) 4-1/2 (114) 7-1/8 (181) 7-1/8 (181) 7-1/8 (181) 7-1/8 (181) 8-1/8 (206) 8-1/8 (206) 8-1/8 (206) 8-1/8 (206) 8-1/8 (206) 8-1/8 (206) 8-1/8 (206) 9-5/8 (245) 9-5/8 (245) Shaded bore sizes (D) according to API 6D Shaded end-to-end dimensions (E) according to API 6D Butt welding ends according to ASME B16.25 L - A K M - 8-3/4 (222) 8-3/4 (222) 8-3/4 (222) 8-3/4 (222) 11-1/2 (292) 11-1/2 (292) 11-1/2 (292) 11-1/2 (292) 15-3/4 (400) 21-5/8 (549) 21-5/8 (549) 21-5/8 (549) 21-5/8 (549) 21-5/8 (549) 21-3/4 (552) 21-3/4 (552) 21-3/4 (552) 21-3/4 (552) 22-7/8 (581) 22-7/8 (581) - 13-3/4 (349) 13-3/4 (349) 13-3/4 (349) 13-3/4 (349) 13-3/4 (349) 13-3/4 (349) 13-3/4 (349) 13-3/4 (349) 23-5/8 (600) 31-1/2 (800) 31-1/2 (800) 31-1/2 (800) 31-1/2 (800) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) - 2-5/8 (67) 2-5/8 (67) 2-5/8 (67) 2-5/8 (67) 3 (76) 3 (76) 3 (76) 3 (76) 4-3/8 (111) 4-3/8 (111) 4-3/8 (111) 4-3/8 (111) 4-3/8 (111) 5-3/8 (137) 5-3/8 (137) 5-3/8 (137) 5-3/8 (137) 5-3/8 (137) 6-1/4 (159) 6-1/4 (159) - - - - - - WEIGHT lb (kg) WE RF/RTJ 440 (200) 720 (327) 1050 (476) 1450 (658) 1800 (816) 2160 (980) 3020 (1370) 4050 (1837) 5020 (2277) 6010 (2726) 7600 (3447) 8700 (3946) 10,420 (4726) 11,860 (5380) 14,500 (6577) 16,880 (7657) 21,560 (9779) 25,390 (11,517) 30,860 (13,998) 35270 (15,998) 54010 (24,499) 66130 (29,996) 520 (236) 850 (386) 1250 (567) 1740 (789) 2160 (980) 2570 (1166) 3610 (1637) 4850 (2200) 6010 (2726) 7200 (3266) 9120 (4137) 10440 (4736) 12,500 (5670) 14,210 (6446) 17,390 (7888) 20,260 (9190) 25,850 (11,725) 30,460 (13,816) 37030 (16,797) 42320 (19,196) 64810 (29,397) 79,360 (35,997) Larger sizes available on request Reduced-bore valves also available ASME CLASS 300 ASME CLASS 300 SIZE in. D (mm) 6 (150) 8 (200) 10 (250) 12 (300) 14 (350) 16 (400) 18 (450) 20 (500) 22 (550) 24 (600) 26 (650) 28 (700) 30 (750) 32 (800) 34 (850) 36 (900) 40 (1000) 42 (1050) 46 (1150) 48 (1200) 56 (1400) 60 (1500) 6 (152) 8 (203) 10 (254) 12 (305) 13-1/4 (337) 15-1/4 (387) 17-1/4 (438) 19-1/4 (489) 21-1/4 (540) 23-1/4 (591) 25 (635) 27 (686) 29 (737) 30-3/4 (781) 32-3/4 (832) 34-1/2 (876) 38-1/2 (978) 40-1/4 (1022) 44 (1118) 46 (1168) 54-1/2 (1384) 57-1/2 (1461) E F WE RF RTJ 18 (457) 20-1/2 (521) 22 (559) 25 (635) 30 (762) 33 (838) 36 (914) 39 (991) 43 (1092) 45 (1143) 49 (1245) 53 (1346) 55 (1397) 60 (1524) 64 (1626) 68 (1727) 15-7/8 (403) 19-3/4 (502) 22-3/8 (568) 25-1/2 (648) 30 (762) 33 (838) 36 (914) 39 (991) 43 (1092) 45 (1143) 49 (1245) 53 (1346) 55 (1397) 60 (1524) 64 (1626) 68 (1727) 16-1/2 (419) 20-3/8 (518) 23 (584) 26-1/8 (664) 30-5/8 (778) 33-5/8 (854) 36-5/8 (930) 39-3/4 (1010) 43-7/8 (1115) 45-7/8 (1165) 50 (1270) 54 (1372) 56 (1422) 61-1/8 (1553) 65-1/8 (1654) 69-1/8 (1756) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) Upon request Flanges in accordance with ASME B16.5 11-7/8 (302) 13-3/8 (340) 14-7/8 (378) 16-3/8 (416) 18-3/8 (467) 19-7/8 (505) 21-1/2 (546) 23-1/8 (587) 24-7/8 (632) 26-3/8 (670) 28-1/4 (718) 29-5/8 (753) 31-3/4 (806) 33-1/4 (845) 34-3/8 (873) 35-3/4 (908) 39-3/8 (1000) 40-3/4 (1035) 44-5/8 (1134) 46-3/8 (1178) 52-3/4 (1321) 56-3/8 (1432) G 8-1/2 (108) 9-7/8 (108) 11-5/8 (118) 13-1/2 (118) 14-5/8 (143) 16-1/4 (143) 18 (168) 16-7/8 (429) 21-1/8 (537) 22-1/2 (572) 24-1/2 (622) 25-7/8 (657) 27-1/2 (699) 29 (737) 30-7/8 (784) 32-3/8 (822) 35-5/8 (905) 38-1/8 (968) 42-1/2 (1080) 44-3/8 (1127) 50-3/8 (1280) 55-1/8 (1400) S 12 (305) 15-7/8 (403) 18-3/8 (467) 21-3/4 (552) 23-1/4 (591) 26-3/4 (679) 30-1/4 (768) 33-1/4 (845) 36-5/8 (930) 39-1/4 (997) 42-1/8 (1070) 45-1/4 (1149) 49-1/8 (1248) 51-1/2 (1308) 53-7/8 (1369) 57-3/8 (1457) 64-1/2 (1638) 68-1/8 (1730) 75-1/4 (1911) 78-1/4 (1988) 90-3/4 (2305) 97-1/2 (2477) H 2-3/4 (70) 2-3/4 (70) 3-3/4 (95) 3-3/4 (95) 4-1/2 (114) 4-1/2 (114) 4-1/2 (114) 7-1/8 (181) 7-1/8 (181) 7-1/8 (181) 8-1/8 (206) 8-1/8 (206) 8-1/8 (206) 8-1/8 (206) 8-1/8 (206) 8-1/8 (206) 8-1/8 (206) 9-5/8 (245) 9-5/8 (245) 9-5/8 (245) 9-5/8 (245) 9-5/8 (245) L - A K M - 8-3/4 (222) 8-3/4 (222) 11-1/2 (292) 11-1/2 (222) 11-1/2 (292) 11-1/2 (292) 15-3/4 (400) 21-5/8 (549) 21-5/8 (549) 21-5/8 (549) 21-3/4 (552) 21-3/4 (552) 21-3/4 (552) 21-3/4 (552) 21-3/4 (552) 22-7/8 (581) 22-7/8 (581) 22-7/8 (581) 22-7/8 (581) 25-5/8 (651) - 13-3/4 (349) 13-3/4 (349) 13-3/4 (349) 13-3/4 (349) 13-3/4 (349) 13-3/4 (349) 23-5/8 (600) 31-1/2 (800) 31-1/2 (800) 31-1/2 (800) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 47-1/4 (1200) - 2-5/8 (67) 2-5/8 (67) 3 (76) 3 (67) 3 (76) 3 (76) 4-3/8 (111) 4-3/8 (111) 4-3/8 (111) 4-3/8 (111) 5-3/8 (137) 5-3/8 (137) 5-3/8 (137) 5-3/8 (137) 5-3/8 (137) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-5/8 (168) - - - - - - WEIGHT lb (kg) WE RF/RTJ 460 (209) 740 (336) 1100 (499) 1520 (689) 1890 (857) 2240 (1016) 3150 (1429) 4250 (1928) 5260 (2386) 6300 (2858) 7980 (3620) 9120 (4137) 10,930 (4958) 12,430 (5638) 15,210 (6899) 17,720 (8038) 22,610 (10,256) 26,650 (12,088) 32,400 (14,696) 37,030 (16,797) 56,700 (25,719) 69,440 (31,497) 550 (249) 880 (399) 1320 (599) 1800 (816) 2270 (1030) 2680 (1216) 3760 (1706) 5090 (2309) 6300 (2858) 7560 (3429) 9560 (4336) 10,930 (4958) 13,110 (5947) 14,900 (6759) 18,250 (8278) 21,250 (9639) 27,130 (12,306) 31,960 (14,497) 38,880 (17,636) 44,440 (20,158) 68,030 (30,858) 83,330 (37,798) Shaded bore sizes (D) according to API 6D Shaded end-to-end dimensions (E) according to API 6D Butt welding ends according to ASME B16.25 17 DIMENSIONS AND WEIGHTS (CONT.) ASME CLASS 400 ASME CLASS 400 SIZE in. D (mm) 6 (150) 8 (200) 10 (250) 12 (300) 14 (350) 16 (400) 18 (450) 20 (500) 22 (550) 24 (600) 26 (650) 28 (700) 30 (750) 32 (800) 34 (850) 36 (900) 40 (1000) 42 (1050) 46 (1150) 48 (1200) 56 (1400) 60 (1500) 6 (152) 8 (203) 10 (254) 12 (305) 13-1/4 (337) 15-1/4 (387) 17-1/4 (438) 19-1/4 (489) 21-1/4 (540) 23-1/4 (591) 25 (635) 27 (686) 29 (737) 30-3/4 (781) 32-3/4 (832) 34-1/2 (876) 38-1/2 (978) 40-1/4 (1022) 44 (1118) 46 (1168) 54-1/2 (1384) 57-1/2 (1461) E RF RTJ 19-1/2 (495) 23-1/2 (597) 26-1/2 (673) 30 (762) 32-1/2 (826) 35-1/2 (902) 38-1/2 (978) 41-1/2 (1054) 45 (1143) 48-1/2 (1232) 51-1/2 (1308) 55 (1397) 60 (1524) 65 (1651) 70 (1778) 74 (1880) 19-1/2 (495) 23-1/2 (597) 26-1/2 (673) 30 (762) 32-1/2 (826) 35-1/2 (902) 38-1/2 (978) 41-1/2 (1054) 45 (1143) 48-1/2 (1232) 51-1/2 (1308) 55 (1397) 60 (1524) 65 (1651) 70 (1778) 74 (1880) 19-5/8 (499) 23-5/8 (600) 26-5/8 (676) 30-1/8 (765) 32-5/8 (829) 35-5/8 (905) 38-5/8 (981) 41-3/4 (1056) 45-3/8 (1153) 48-7/8 (1242) 51 (1295) 55-1/2 (1410) 60-1/2 (1537) 65-5/8 (1667) 70-5/8 (1794) 74-5/8 (1896) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) Upon request Flanges in accordance with ASME B16.5 18 F WE 12-1/8 (308) 13-5/8 (346) 15-1/4 (387) 16-3/4 (425) 18-3/4 (476) 20-3/8 (518) 21-7/8 (556) 23-1/2 (597) 25-3/8 (645) 26-7/8 (683) 28-7/8 (734) 30-1/4 (768) 32-3/8 (822) 33-7/8 (861) 35-1/8 (892) 36-1/2 (927) 40-1/8 (1019) 41-1/2 (1054) 45-5/8 (1159) 47-3/8 (1203) 53-3/4 (1365) 57-1/2 (1461) G 8-1/2 (108) 9-7/8 (108) 11-5/8 (118) 13-1/2 (118) 14-5/8 (143) 16-1/4 (143) 18 (168) 19-3/8 (492) 21-1/8 (537) 22-1/2 (572) 24-1/2 (622) 25-7/8 (657) 27-1/2 (699) 29 (737) 30-7/8 (784) 32-3/8 (822) 35-5/8 (905) 38-1/8 (968) 42-1/2 (1080) 44-3/8 (1127) 50-3/8 (1280) 55-1/8 (1400) S 12-1/8 (308) 16 (406) 18-5/8 (473) 22 (559) 23-1/2 (597) 27 (686) 30-1/2 (775) 33-1/2 (851) 37 (940) 39-5/8 (1007) 42-1/2 (1080) 45-5/8 (1159) 49-5/8 (1261) 52 (1321) 54-1/2 (1384) 58 (1473) 65-1/8 (1654) 68-3/4 (1746) 76 (2007) 79 (1988) 91-5/8 (2327) 98-3/8 (2499) H 2-3/4 (70) 3-3/4 (95) 3-3/4 (95) 3-3/4 (95) 4-1/2 (114) 4-1/2 (114) 7-1/8 (181) 7-1/8 (181) 7-1/8 (181) 8-1/8 (206) 8-1/8 (206) 8-1/8 (206) 8-1/8 (206) 8-1/8 (206) 8-1/8 (206) 8-1/8 (206) 9-5/8 (245) 9-5/8 (245) 9-5/8 (245) 9-5/8 (245) 11 (279) 11 (279) Shaded bore sizes (D) according to API 6D Shaded end-to-end dimensions (E) according to API 6D Butt welding ends according to ASME B16.25 L - A K M - 8-3/4 (222) 11-1/2 (292) 11-1/2 (292) 11-1/2 (292) 11-1/2 (292) 11-1/2 (292) 21-5/8 (549) 21-5/8 (549) 21-5/8 (549) 21-3/4 (552) 21-3/4 (552) 21-3/4 (552) 21-3/4 (552) 22-7/8 (581) 22-7/8 (581) 22-7/8 (581) 22-7/8 (581) 22-7/8 (581) 22-7/8 (581) 25-5/8 (651) - 13-3/4 (349) 13-3/4 (349) 13-3/4 (349) 13-3/4 (349) 13-3/4 (349) 13-3/4 (349) 31-1/2 (800) 31-1/2 (800) 31-1/2 (800) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 47-1/4 (1200) - 2-5/8 (67) 3 (76) 3 (76) 3 (67) 3 (76) 3 (76) 4-3/8 (111) 4-3/8 (111) 4-3/8 (111) 5-3/8 (137) 5-3/8 (137) 5-3/8 (137) 5-3/8 (137) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-5/8 (168) - - - - - - WEIGHT lb (kg) WE RF/RTJ 520 (236) 850 (386) 1250 (567) 1740 (789) 2160 (980) 2570 (1166) 3610 (1637) 4870 (2209) 6040 (2740) 7230 (3279) 9170 (4159) 10,490 (4758) 12,560 (5697) 14,280 (6477) 17,480 (7929) 20,370 (9240) 25,990 (11,789) 30,640 (13,898) 37,250 (16,896) 42,590 (19,319) 65,180 (29,565) 79,850 (36,219) 610 (277) 1010 (458) 1490 (676) 2070 (939) 2570 (1166) 3080 (1397) 4320 (1960) 5840 (2649) 7230 (3279) 8660 (3928) 11,000 (4990) 12,580 (5706) 15,070 (6836) 17,120 (7766) 20,960 (9507) 24,420 (11,077) 31,170 (14,138) 36,770 (16,679) 44,700 (20,276) 51,100 (23,179) 78,210 (35,475) 95,810 (43,459) ASME CLASS 600 ASME CLASS 600 SIZE in. D (mm) 6 (150) 8 (200) 10 (250) 12 (300) 14 (350) 16 (400) 18 (450) 20 (500) 22 (550) 24 (600) 26 (650) 28 (700) 30 (750) 32 (800) 34 (850) 36 (900) 40 (1000) 42 (1050) 46 (1150) 48 (1200) 56 (1400) 60 (1500) 6 (152) 8 (203) 10 (254) 12 (305) 13-1/4 (337) 15-1/4 (387) 17-1/4 (438) 19-1/4 (489) 21-1/4 (540) 23-1/4 (591) 25 (635) 27 (686) 29 (737) 30-3/4 (781) 32-3/4 (832) 34-1/2 (876) 38-1/2 (978) 40-1/4 (1022) 44 (1118) 46 (1168) 54-1/2 (1384) 57-1/2 (1461) E F WE RF RTJ 22 (559) 26 (660) 31 (787) 33 (838) 35 (889) 39 (991) 43 (1092) 47 (1194) 51 (1295) 55 (1397) 57 (1448) 61 (1549) 65 (1651) 70 (1778) 76 (1930) 82 (2083) 22 (559) 26 (660) 31 (787) 33 (838) 35 (889) 39 (991) 43 (1092) 47 (1194) 51 (1295) 55 (1397) 57 (1448) 61 (1549) 65 (1651) 70 (1778) 76 (1930) 82 (2083) 22-1/8 (562) 26-1/8 (664) 31-1/8 (790) 33-1/8 (841) 35-1/8 (892) 39-1/8 (994) 43-1/8 (1095) 47-1/4 (1200) 51-3/8 (1305) 55-3/8 (1407) 57-1/2 (1461) 61-1/2 (1562) 65-1/2 (1664) 70-5/8 (1794) 76-5/8 (1946) 82-5/8 (2099) (1) (1) (1) (1) (1) (1) (1) (1) (1) 85-7/8 (2181) 85-7/8 (2181) (1) (1) (1) (1) (1) (1) (1) (1) Upon request Flanges in accordance with ASME B16.5 12-1/4 (311) 13-3/4 (349) 15-3/8 (391) 16-7/8 (429) 18-7/8 (480) 20-1/2 (521) 22-1/8 (562) 23-3/4 (603) 25-5/8 (651) 27-1/8 (689) 29-1/8 (740) 30-1/2 (775) 32-5/8 (829) 34-1/4 (870) 35-3/8 (899) 36-7/8 (937) 40-1/2 (1029) 42 (1067) 46-1/8 (1171) 47-7/8 (1216) 54-3/8 (1381) 58-1/8 (1476) G 8-1/2 (108) 9-7/8 (108) 11-5/8 (118) 13-1/2 (118) 14-5/8 (143) 16-1/4 (143) 18 (168) 19-3/8 (492) 21-1/8 (537) 22-1/2 (572) 24-1/2 (622) 25-7/8 (657) 27-1/2 (699) 29 (737) 30-7/8 (784) 32-3/8 (822) 35-5/8 (905) 38-1/8 (968) 42-1/2 (1080) 44-3/8 (1127) 50-3/8 (1280) 55-1/8 (1400) S 12-1/4 (311) 16-1/8 (410) 18-7/8 (480) 22-1/4 (565) 23-3/4 (603) 27-1/4 (692) 30-7/8 (784) 33-7/8 (861) 37-3/8 (949) 40-1/8 (1019) 43 (1092) 46-1/8 (1172) 50-1/8 (1273) 52-1/2 (1334) 55 (1397) 58-1/2 (1486) 65-7/8 (1673) 69-1/2 (1765) 76-3/4 (1949) 79-7/8 (2029) 92-5/8 (2353) 99-3/8 (2524) H 2-3/4 (70) 3-3/4 (95) 3-3/4 (95) 3-3/4 (95) 4-1/2 (114) 4-1/2 (114) 7-1/8 (181) 7-1/8 (181) 8-1/8 (206) 8-1/8 (206) 8-1/8 (206) 8-1/8 (206) 9-5/8 (245) 9-5/8 (245) 9-5/8 (245) 9-5/8 (245) 9-5/8 (245) 9-5/8 (245) 9-5/8 (245) 9-5/8 (245) 11 (279) 11 (279) Shaded bore sizes (D) according to API 6D Shaded end-to-end dimensions (E) according to API 6D Butt welding ends according to ASME B16.25 L - A K M - 8-3/4 (222) 11-1/2 (292) 11-1/2 (292) 11-1/2 (292) 11-1/2 (292) 15-3/4 (400) 21-5/8 (549) 21-5/8 (549) 21-5/8 (549) 21-3/4 (552) 22-7/8 (581) 22-7/8 (581) 22-7/8 (581) 22-7/8 (581) 22-7/8 (581) 22-7/8 (581) 22-7/8 (581) 25-5/8 (651) 25-5/8 (651) 25-5/8 (651) - 13-3/4 (349) 13-3/4 (349) 13-3/4 (349) 13-3/4 (349) 13-3/4 (349) 23-5/8 (600) 31-1/2 (800) 31-1/2 (800) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 47-1/4 (1200) 47-1/4 (1200) 47-1/4 (1200) - 2-5/8 (67) 3 (76) 3 (76) 3 (67) 3 (76) 4-3/8 (111) 4-3/8 (111) 4-3/8 (111) 5-3/8 (137) 5-3/8 (137) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-5/8 (168) 6-5/8 (168) 6-5/8 (168) - - - - - - WEIGHT lb (kg) WE RF/RTJ 570 (259) 920 (417) 1360 (617) 1890 (857) 2330 (1057) 2790 (1266) 3920 (1778) 5290 (2400) 6560 (2976) 7870 (3570) 9980 (4527) 11,410 (5175) 13,690 (6210) 15,560 (7058) 19,040 (8636) 22,200 (10,070) 28,320 (12,846) 33,390 (15,145) 40,600 (18,416) 46,400 (21,047) 71,050 (32,228) 87,010 (39,467) 680 (308) 1100 (500) 1630 (739) 2270 (1030) 2790 (1266) 3350 (1520) 4690 (2127) 6340 (2876) 7870 (3570) 9430 (4277) 11,970 (5430) 13,690 (6210) 16,420 (7448) 18,670 (8469) 22,830 (10,356) 26,630 (12,079) 33,990 (15,418) 40,070 (18,175) 48,720 (22,099) 55,680 (25,256) 85,250 (38,669) 104,400 (47,355) 19 DIMENSIONS AND WEIGHTS (CONT.) ASME CLASS 900 ASME CLASS 900 SIZE in. D (mm) 6 (150) 8 (200) 10 (250) 12 (300) 14 (350) 16 (400) 18 (450) 20 (500) 22 (550) 24 (600) 26 (650) 28 (700) 30 (750) 32 (800) 34 (850) 36 (900) 40 (1000) 42 (1050) 46 (1150) 48 (1200) 6 (152) 8 (203) 10 (254) 12 (305) 12-3/4 (324) 14-3/4 (375) 16-3/4 (425) 18-5/8 (473) 20-5/8 (524) 22-1/2 (572) 24-3/8 (619) 26-1/4 (667) 28-1/8 (715) 30 (762) 31-7/8 (810) 33-3/4 (857) 37-5/8 (956) 39-5/8 (1007) 43-3/8 (1102) 45-1/4 (1149) E RF RTJ 24 (610) 29 (737) 33 (838) 38 (965) 40-1/2 (1029) 44-1/2 (1130) 48 (1219) 52 (1321) 24 (610) 29 (737) 33 (838) 38 (965) 40-1/2 (1029) 44-1/2 (1130) 48 (1219) 52 (1321) 24-1/8 (613) 29-1/8 (740) 33-1/8 (841) 38-1/8 (968) 40-7/8 (1038) 44-7/8 (1140) 48-1/2 (1232) 52-1/2 (1334) (1) (1) (1) 61 (1549) 61 (1549) 61-3/4 (1568) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) Upon request Flanges in accordance with ASME B16.5 20 F WE 9-7/8 (251) 11-3/8 (289) 13-5/8 (346) 15-3/8 (391) 17-3/4 (451) 19-5/8 (499) 21-5/8 (549) 23-1/4 (591) 25-3/4 (654) 27-1/2 (699) 29-7/8 (759) 31-7/8 (810) 32-3/4 (832) 35-7/8 (911) 37-3/4 (959) 40-1/8 (1019) 44-1/8 (1121) 47-1/4 (1200) 50-3/8 (1280) 52-3/8 (1330) G 9-1/2 (241) 10-7/8 (276) 12-1/2 (318) 14-3/8 (365) 15-3/8 (391) 16-7/8 (429) 19-1/8 (486) 20-7/8 (530) 21-7/8 (556) 24-3/8 (619) 26-1/4 (667) 27-7/8 (708) 29-5/8 (753) 31-7/8 (810) 33-3/8 (848) 34-3/4 (883) 38-1/4 (972) 41-3/4 (1060) 43-3/4 (1111) 45-1/4 (1149) S 13-1/4 (337) 16-1/2 (419) 20-1/8 (511) 23-5/8 (600) 26-3/4 (679) 30-3/8 (772) 33-1/2 (851) 36-1/4 (921) 40-1/2 (1029) 43-3/4 (1111) 47-1/4 (1200) 50-3/4 (1289) 53-3/8 (1356) 57-1/2 (1461) 61 (1549) 64-3/8 (1635) 71-1/4 (1810) 74-3/4 (1888) 81-1/2 (2070) 85 (2159) H 3-3/4 (95) 3-3/4 (95) 4-1/2 (114) 4-1/2 (114) 4-1/2 (114) 7-1/8 (181) 7-1/8 (181) 8-1/8 (206) 8-1/8 (206) 9-5/8 (245) 9-5/8 (245) 9-5/8 (245) 9-5/8 (245) 9-5/8 (245) 9-5/8 (245) 11 (279) 11 (279) 11 (279) 11 (279) 11 (279) Shaded bore sizes (D) according to API 6D Shaded end-to-end dimensions (E) according to API 6D Butt welding ends according to ASME B16.25 L - A 11-1/2 (292) 11-1/2 (292) 11-1/2 (292) 11-1/2 (292) 15-3/4 (400) 21-5/8 (549) 21-5/8 (549) 21-3/4 (552) 22-7/8 (581) 22-7/8 (581) 22-7/8 (581) 22-7/8 (581) 22-7/8 (581) 22-7/8 (581) 22-7/8 (581) 22-7/8 (581) 22-7/8 (581) 22-7/8 (581) 22-7/8 (581) 25-5/8 (651) K 13-3/4 (349) 13-3/4 (349) 13-3/4 (349) 13-3/4 (349) 23-5/8 (600) 31-1/2 (800) 31-1/2 (800) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 47-1/4 (1200) M 3 (76) 3 (76) 3 (76) 3 (67) 4-3/8 (111) 4-3/8 (111) 5-3/8 (137) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-5/8 (168) WEIGHT lb (kg) WE RF/RTJ 720 (327) 1190 (540) 1760 (798) 2440 (1107) 3020 (1370) 3630 (1647) 5090 (2309) 6870 (3116) 8530 (3869) 10,220 (4636) 12,960 (5879) 14,830 (6727) 17,790 (8069) 20,210 (9167) 24,750 (11,226) 28,850 (13,086) 36,810 (16,697) 43,400 (19,686) 52,770 (23,936) 60,310 (27,356) 850 (386) 1410 (640) 2110 (957) 2930 (1329) 3610 (1637) 4360 (1978) 6100 (2767) 8240 (3738) 10,220 (4636) 12,250 (5557) 15,540 (7049) 17,790 (8069) 21,340 (9680) 24,250 (11,000) 29,690 (13,467) 34,610 (15,699) 44,170 (20,035) 52,070 (23,619) 63,310 (28,717) 72,370 (32,826) ASME CLASS 1500 ASME CLASS 1500 SIZE in. D (mm) E WE RF F G S H L A K M RTJ WEIGHT lb (kg) WE RF/RTJ 6 5-3/4 27-3/4 27-3/4 28 12-5/8 11 16-7/8 3-3/4 - 11-1/2 13-3/4 3 850 1010 (150) (146) (705) (705) (711) (321) (279) (429) (95) - (292) (349) (76) (386) (458) 8 7-5/8 32-3/4 32-3/4 33-1/8 14-5/8 12-7/8 21-1/8 4-1/2 - 11-1/2 13-3/4 3 1410 1670 (200) (194) (832) (832) (841) (372) (327) (537) (114) - (292) (349) (76) (640) (757) 10 9-1/2 39 39 39-3/8 17-3/8 15-3/8 25-3/4 4-1/2 - 11-1/2 13-3/4 3 2110 2530 (250) (241) (991) (991) (1000) (441) (391) (654) (114) - (292) (349) (76) (957) (1148) 12 11-3/8 44-1/2 44-1/2 45-1/8 19-5/8 16-5/8 30-1/4 4-1/2 - 11-1/2 13-3/4 3 2930 3500 (300) (289) (1130) (1130) (1146) (499) (422) (768) (114) - (292) (349) (67) (1329) (1610) 14 12-1/2 49-1/2 49-1/2 50-1/4 22-5/8 19-5/8 34-1/4 7-1/8 - 15-3/4 23-5/8 4-3/8 3610 4320 (350) (318) (1257) (1257) (1276) (575) (499) (870) (181) - (400) (600) (111) (1637) (1960) 16 14-1/4 54-1/2 54-1/2 55-3/8 25-1/4 22 38-3/4 7-1/8 - 21-5/8 31-1/2 4-3/8 4360 5220 (400) (362) (1384) (1384) (1407) (641) (559) (984) (181) - (549) (800) (111) (1978) (2368) 18 16-1/4 (1) (1) 23-1/4 42-7/8 8-1/8 - 21-5/8 31-1/2 4-3/8 6100 7310 (413) (1) 27-3/4 (450) (705) (591) (1089) (206) - (549) (800) (111) (2767) (3316) (1) (1) (1) 29-7/8 28-1/2 46-3/8 9-5/8 - 21-3/4 23-5/8 5-3/8 8240 9870 (759) (724) (1178) (245) - (552) (600) (137) (3738) (4477) (1) (1) (1) - 22-7/8 23-5/8 6-1/4 10,220 12,250 (581) (600) (159) (4636) (5557) 22-7/8 23-5/8 6-1/4 12,250 14,700 20 18 (500) (457) 22 19-3/4 (550) (502) 24 21-5/8 (600) (549) 26 23-1/2 (650) (597) 28 25-1/4 (700) (641) 30 27 (750) (686) 32 28-3/4 (800) (730) 34 30-1/2 (850) (775) 36 32-1/4 (900) (819) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) Upon request Flanges in accordance with ASME B16.5 33 30-1/4 51-7/8 9-5/8 (838) (768) (1318) (245) 35-1/8 32 55-7/8 9-5/8 (892) (813) (1419) (245) 38-1/4 35-1/2 60-1/2 11 (972) (902) (1537) (279) 40-7/8 37 65 11 (1038) (940) (1651) (279) 42 40-3/4 68-3/8 11 (1067) (1035) (1737) (279) 45-7/8 41-3/4 73-5/8 11 (1165) (1060) (1870) (279) 48-3/8 44-7/8 78-1/8 11 (1229) (1137) (1984) (279) 51-3/8 46-1/2 82-3/8 11 (1305) (1181) (2092) (279) - (581) (600) (159) (5557) (6668) - - - - 15,540 18,650 (7049) (8459) - - - - 17,790 21,340 (8069) (9680) - - - - 21,340 25,590 (9680) (11,607) - - - - 24,250 29,100 (11,000) (31,200) - - - - 29,690 35,620 (13,467) (16,157) 34,610 41,530 (15,699) (18,838) Shaded bore sizes (D) according to API 6D Shaded end-to-end dimensions (E) according to API 6D Butt welding ends according to ASME B16.25 21 GROVE B7 DESIGN FEATURES Standard Features Options B7.1 • Triple-barrier stem seals B7.1 • PTFE various grades of reinforced gaskets, spring energized, for stem and seat sealing • Factory-positioned external stops • Emergency grease fitting for stem • Metal-to-metal seats • Stem separated from the ball; anti-blowout design • Double-barrier sealing in both directions (DPE) • Plastic polymer insert for seat sealing • Body relief valve for overpressure • Self-relieving seats • Double block-and-bleed capabilities • Metal-backed, self-lubricating bearings/washers Valve Construction • Nickel plating for trim parts The B7 denomination identifies the side-entry ball valve ASME Class 2500. • Fire-safe graphite rings • Antistatic device B7.B • Triple-barrier stem seals • Stem separate from the ball; anti-blowout design • Ball load on the bearing blocks • Double-barrier sealing in both directions (DPE) • Body relief valve for overpressure • Sealant injection system for emergency seal • Metal-backed, self-lubricating bearings/washers • Nickel plating for trim parts • Trunnion mounted ball 22 Due to the high pressure and strong force involved, the materials selection is carried out by paying particular attention to the anti-extrusion features of the gaskets and to the resistance of the ball and stem materials. GROVE B7.B VALVE ASSEMBLY AND CROSS SECTION Item 1 2 4 5 6b 6I 8 9 10 31 32 39 45 103 Description Body Closure Ball Stem Outer Seat Ring Inner Seat Ring Body O-ring Gland Plate Gland Bushing Body Stud Body Stud Nut Drain Valve Grease Fitting Closure Backup Ring Item 123 124 131 132 133 134 135 136 137 139 140 142 143 146 148 Description Stem Key Stem Key Capscrew Gland Plate Capscrew Adapter Plate Capscrew Puller Bushing Capscrew Stem O-ring Seat O-ring Gland Plate O-ring Seal O-ring Seat Spring Pin Bearing Retainer Pin Spring Seat Lock Ring Puller Bushing Bearing Retainer Item 149 150 151 152 153 154 160 164 172 176 178 189 190 299 Description Bearing Upper Thrust Washer Lower Thrust Washer Spacer Drive Pin Relief Valve Adapter Plate Stem Backup Ring Vent Plug U-cup Packing Check Valve Gland Vent Seat Backup Ring Stop Spring Pin 23 GROVE B7.1 and B7.B DIMENSIONS AND WEIGHTS ASME CLASS 2500 ASME CLASS 2500 – B7.1 SIZE in. D (mm) 1-1/2 (40) 2 x 1-1/2 x 2 (50 x 40 x 50) 2 (50) 3x2x3 (80 x 50 x 80) 3 (80) 4x3x4 (100 x 80 x 100) 4 (100) 6x4x6 (150 x 100 x 150) 6 (150) 8x6x8 (200 x 150 x 200) 1-1/4 (32) 1-1/4 (32) 1-3/4 (44) 1-3/4 (44) 2-1/2 (64) 2-1/2 (64) 3-1/2 (89) 3-1/2 (89) 5-1/4 (133) 5-1/4 (133) E F WE RF RTJ 15-1/8 (384) 17-3/4 (451) 17-3/4 (451) 22-3/4 (578) 22-3/4 (578) 26-1/2 (673) 26-1/2 (673) 36 (914) 36 (914) 40-1/4 (1022) 15-1/8 (384) 17-3/4 (451) 17-3/4 (451) 22-3/4 (578) 22-3/4 (578) 26-1/2 (673) 26-1/2 (673) 36 (914) 36 (914) 40-1/4 (1022) 15-1/4 (387) 17-7/8 (454) 17-7/8 (454) 23 (584) 23 (584) 26-7/8 (683) 26-7/8 (683) 36-1/2 (927) 36-1/2 (927) 40-7/8 (1038) WE RF RTJ 40-1/4 (1022) 50 (1270) 56 (1422) (1) 40-1/4 (1022) 50 (1270) 56 (1422) (1) 40-7/8 (1038) 50-7/8 (1292) 56-7/8 (1445) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) G S H L A K M WEIGHT lb (kg) WE RF/RTJ 130 (59) 180 (82) 260 (118) 330 (150) 480 (218) 620 (281) 790 (358) 1250 (567) 1650 (748) 2180 (989) 3-7/8 (98) 3-7/8 (98) 4-3/8 (111) 4-3/8 (111) 5-1/2 (140) 5-1/2 (140) 9-7/8 (251) 9-7/8 (251) 11-3/8 (289) 11-3/8 (289) 5-1/2 (140) 5-1/2 (140) 6-1/4 (159) 6-1/4 (159) 7-1/8 (181) 7-1/8 (181) 7-7/8 (200) 7-7/8 (200) 9-1/4 (235) 9-1/4 (235) 6-7/8 (175) 6-7/8 (175) 7-7/8 (200) 7-7/8 (200) 9-7/8 (251) 9-7/8 (251) 14-5/8 (372) 14-58 (372) 16-7/8 (429) 16-7/8 (429) 2-3/8 (60) 2-3/8 (60) 2-3/8 (60) 2-3/8 (60) 2-1/2 (64) 2-1/2 (64) 3 (76) 3 (76) 4-5/8 (118) 4-5/8 (118) - 7-1/2 (191) 7-1/2 (191) 7-1/2 (191) 7-1/2 (191) 8-3/4 (222) 8-3/4 (222) 11-1/2 (292) 11-1/2 (292) 11-1/2 (292) 11-1/2 (292) 7-7/8 (200) 7-7/8 (200) 7-7/8 (200) 7-7/8 (200) 13-3/4 (349) 13-3/4 (349) 13-3/4 (349) 13-3/4 (349) 13-3/4 (349) 13-3/4 (349) 1-3/4 (44) 1-3/4 (44) 1-3/4 (44) 1-3/4 (44) 2-5/8 (67) 2-5/8 (67) 3 (76) 3 (76) 3 (76) 3 (76) 80 (36) 90 (41) 150 (68) 210 (95) 350 (159) 370 (168) 700 (318) 730 (331) 1480 (671) 1890 (857) F G S H L A K M WEIGHT lb (kg) WE RF/RTJ 3650 (1656) 5480 (2486) 7600 (3447) 9390 (4259) 11,330 (5139) 15,870 (7199) 21,420 (9716) 4340 (1969) 6590 (2989) 9100 (4128) 11,220 (5089) 13,580 (6160) 19,020 (8627) 25,660 (11,639) ASME CLASS 2500 – B7.B SIZE in. D (mm) 8 (200) 10 (250) 12 (300) 14 (350) 16 (400) 18 (450) 20 (500) 7-1/8 (181) 8-7/8 (226) 10-1/2 (267) 12-1/4 (311) 13-7/8 (353) 15-5/8 (397) 17-1/4 (438) E 15-1/8 (384) 17-1/8 (435) 19-5/8 (499) 22-7/8 (581) 26-3/8 (670) 29-1/8 (740) 32-1/2 (826) 15-1/2 (394) 18-1/4 (464) 20-1/2 (521) 24-3/4 (629) 28-3/8 (721) 31-7/8 (810) 35-3/8 (899) 26 (660) 31-1/8 (790) 34-1/4 (870) 39 (991) 43-1/4 (1099) 47-7/8 (1216) 52-1/8 (1324) 4-5/8 (118) 5-1/2 (140) 5-1/2 (140) 8-1/8 (206) 8-1/8 (206) 11 (279) 11 (279) - 15-3/4 (400) 21-5/8 (549) 21-5/8 (549) 21-3/4 (552) 21-3/4 (552) 22-7/8 (581) 22-7/8 (581) 23-5/8 (600) 31-1/2 (800) 31-1/2 (800) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) 23-5/8 (600) Flanges in accordance with ASME B16.5 Butt welding ends according to ASME B16.25 Shaded bore sizes (D) according to API 6D Outlined end-to-end dimensions (E) according to ASME B16.10 Shaded end-to-end dimensions (E) according to API 6D 24 4-3/8 (111) 4-3/8 (111) 4-3/8 (111) 5-3/8 (137) 5-3/8 (137) 6-1/4 (159) 6-1/4 (159) Quality System Quality Assurance Program ISO 9001:2000 and API Q1 Standards All valves are designed in accordance with the most stringent industry procedures and standards and are built according to the European Directives PED and ATEX upon request. Approvals Cameron is an authorized licensee to use the American Petroleum Institute (API) monogram for specification API 6D and API 6A. Certifications • ISO 10423/API 6A • ISO 14313/API 6D • ISO 17423/API 6DSS Inspection Inspection is done per the Quality System requirements based on ISO 9001:2000 and API Q1. Cameron verifies all processes from material receipt to final customer inspection, including the liaison with third-party inspection and certifying authorities. All products can be supplied with certified test reports, which include pressure testing, NDT, and chemical and physical analysis, along with any other specified special test requirements. The material certification of the valve parts can be furnished in accordance with DIN 50049-EN 10204 3.1 (at least) or 3.2. Special Process Cameron operates its own in-house electroless nickel plating (ENP) facility. ASTM B656 and ASTM B733 are the reference standards for plating process and control. Strict quality control procedures for critical process conditions and for the plated components maintain plating consistency. 25 Qualification Testing Research and Development Lab Cameron’s GROVE valves are designed in accordance with the applicable or requested codes and are subjected to full in-house qualification testing. Our in-house testing facilities, with the participation of the major oil and gas companies’ R&D programs, allow Cameron to supply high-quality products. Hydraulic and gas sealing tests, functional tests, and cycling and torque tests all are carried out on prototype valves. These test procedures ensure that the design safety factors, the maximum allowable leakage rates, and the expected valve service life are achieved. Structural Verification Cameron’s engineering department operates an advanced 3D CAD system and conducts finite element analysis (FEA) to simulate various load conditions to determine a component’s suitability for the intended service. Fire-Safe Tests and Certifications Cameron conducts in-house fire-safe testing, and its GROVE valves are certified in compliance with API 6FA and BS 6755 Part 2 fire-safe standards. A complete reference list of qualified and certified valves can be made available upon customer’s request. Cycle Testing Under Flow Conditions Through its in-house flow facility, Cameron verifies the behavior of valves subjected to cycle testing under dynamic flow conditions with the presence of abrasive particles. This test loop has the capacity to test valves up to 6" nominal bore with a maximum service pressure of 2900 psi (200 bar). The main test parameters are PC entered and recorded for future design reference. High-Pressure Gas Testing Customers’ specifications may dictate more severe testing in addition to conventional hydrostatic testing. Cameron is fully equipped to carry out enhanced gas testing at ambient, low and high temperatures using specially equipped bunkers. External leakage rates (if any) are verified by means of a mass spectrometer. Leakage through the seats (if any) is verified by means of calibrated flow meters. For low- and high-temperature service, gas testing can be performed to customer-specified critical dimensions. Cameron has test facilities for various valve dimensions. Testing can be performed at a range of temperatures from -184° F to 752° F (-120° C to 400° C). 26 Services for Valves and Actuation WE BUILD IT. WE BACK IT. Global Network and Local Support Cameron is well-positioned to deliver total aftermarket support, quickly and efficiently, with unmatched OEM expertise. Our highly skilled engineers and technicians are available around the clock, seven days a week to respond to customer queries, troubleshoot problems and offer reliable solutions. Easily Accessible Parts and Spare Valves • OEM spare valves, actuators and parts (including non-Cameron brands) • Handling, storage, packaging and delivery • Dedicated stocking program Comprehensive Services Portfolio • Parts and spare valves • Repair • Field services • Preventative maintenance • Equipment testing and diagnostics • Remanufacturing • Asset preservation • Customer property management • Training and recertification services • Warranty Customized Total Valve CareSM (TVC) Programs Customized asset management plans that optimize uptime, availability and dedicated services. • Engineering consultancy • Site management • Flange management • Startup and commissioning • Spare parts and asset management • Operational support USA • CANADA • LATIN AMERICA • EUROPE • RUSSIA • AFRICA • MIDDLE EAST • ASIA PACIFIC 27 Trademark Information GROVE is a registered trademark of Cameron. This document contains references to registered trademarks or product designations, which are not owned by Cameron. 28 29 3250 Briarpark Drive, Suite 300 Houston, TX 77042 USA Tel 1 281 499 8511 For more information on GROVE ball valves: www.c-a-m.com/GROVE GROVE@c-a-m.com ENVIRONME N XCELLEN LE CE TA TH SAFETY AL A HE ND CA HSE Policy Statement At Cameron, we are committed ethically, financially and personally to a working environment where no one gets hurt and nothing gets harmed. MERON ©2015 Cameron. | GROVE is a registered trademark of Cameron. | SWP 1.5M 6/15 AD01523V
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Create Date : 2015:06:16 07:19:15-05:00 Metadata Date : 2015:06:23 08:25:36-05:00 Modify Date : 2015:06:23 08:25:36-05:00 Creator Tool : Adobe InDesign CC 2014 (Macintosh) Instance ID : uuid:59e1d7dc-4e48-46a3-affd-67df2eb39530 Original Document ID : xmp.did:37935F21332068119109DD5F6F7ACA50 Document ID : xmp.id:efb3e8dd-4d66-47b9-ab76-d6a1ae261e09 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:039ba056-c168-4b33-b74f-740cc655a38d Derived From Document ID : xmp.did:AF312BAE0D2068118083A4AC1556174C Derived From Original Document ID: xmp.did:37935F21332068119109DD5F6F7ACA50 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2014 (Macintosh) History Changed : / History When : 2015:06:16 07:19:16-05:00 Format : application/pdf Producer : Adobe PDF Library 11.0 Trapped : False Page Count : 32 Creator : Adobe InDesign CC 2014 (Macintosh)EXIF Metadata provided by EXIF.tools