H6239 Instruction Sheet M

H6239 to the manual d1732027-949c-4ba2-bd3d-48672b084c98

User Manual: H6239

Open the PDF directly: View PDF PDF.
Page Count: 4

DownloadH6239 Instruction Sheet M
Open PDF In BrowserView PDF
10 TON LOG SPLITTER
MODEL H6239

INSTRUCTION SHEET
Introduction
The Model H6239 10 Ton Log Splitter (Figure 1)
features 10 tons of pressure for splitting firewood,
a 175⁄8" log capacity, an 81⁄4" ram stroke, and two
built-in mini wheels for easy mobility.

Inventory

Splitting
Pump
Handle

Sockets
Advance
Pump
Handle

A. Log Splitter ................................................ 1
B. Handles ...................................................... 2

The Model H6239 is a
heavy machine (106 lbs.
shipping weight). DO
NOT over-exert yourself
while unpacking or moving your machine—get
assistance.

Assembly
Insert a handle into each socket (Figure 1).

Figure 1. Model H6239 handles installed.

Release
Knob

Wedge
Piston
Rod

Operation
1.
2.

Cut the logs you want to split to 175⁄8" or less
to fit into the splitter.
Turn the release knob (Figure 2) counterclockwise to retract the piston rod fully into
the cylinder, then turn the knob clockwise.

Cradle
Figure 2. Model H6239 identification.

Wear ANSI approved safety glasses and
gloves at all times.

Keep hands and other body parts away
from wedge and piston rod when H6239 is
in operation to prevent serious injury. Keep
area around log splitter clear of bystanders
to prevent injury from ejected wood pieces.

This log splitter is only intended to be used
to split logs! Serious injury may occur if this
log splitter is used as a hydraulic press.

3.
4.

5.

Place a log on the cradle between the wedge
and piston rod.
Use the advance pump handle (Figure 1) to
quickly move the piston rod until it is close to
the log. Then use the splitting pump handle
(Figure 1) to split the log.
Turn the release knob counterclockwise to
return the piston rod to the cylinder, turn the
knob clockwise to start over, then remove the
split pieces.

Maintenance
Wipe down the log splitter to remove tree sap or
dirt. Occasionally you may need to add hydraulic
oil to maximize performance.
To add oil:
1.

Fully extend the piston rod.

2.

Remove the oil seal (Figure 3).

Oil Seal

Note—Cut your logs to the same length to
reduce log splitting time.

Storage
Store the log splitter in a dry location with the
release knob open, to relieve hydraulic pressure.

Figure 3. Oil Seal.

3.

Turn the release knob counterclockwise to
expel air out of the oil seal hole.

4.

Add hydraulic oil until the cylinder is 3⁄4 full.

5.

Replace the oil seal.

If you need additional help with this procedure,
call our service department at: (570) 546-9663.

H6239 Parts Breakdown and List
��

�
��

�
�

��
�
�

�

�

��

�
�

��
��

��

��

��

�
��
��
��

REF
1
2
3
4
5
6
7
8

PART #
PH6239001
PH6239002
PH6239003
PH6239004
PH6239005
PH6239006
PH6239007
PH6239008

DESCRIPTION
FRAME
RAM BRACKET
PIN SLEEVE
PIN
U-CLAMP
EXTENSION SPRING
RAM
AXLE

�

��

�

REF
9
10
11
12
13
14
15
16
17
18

PART #
PH6239009
PH6239010
PH6239011
PB32M
PW04M
PLW06M
PN02M
PH6239016
PH6239017
PH6239018

DESCRIPTION
AXLE SLEEVE
COTTER PIN
WHEEL
HEX BOLT M10-1.5 X 25
FLAT WASHER 10MM
LOCK WASHER 10MM
HEX NUT M10-1.5
ADVANCE�PUMP�HANDLE
OIL SEAL
SPLITTING�PUMP�HANDLE

COPYRIGHT © FEBRUARY, 2005 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#BL6998 PRINTED IN CHINA
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Page Count                      : 4
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:d9fc12f8-1552-11dc-9715-000393c83c9a
Create Date                     : 2005:02:23 13:46:07Z
Metadata Date                   : 2007:06:07 16:57:30-07:00
Modify Date                     : 2007:06:07 16:57:30-07:00
Creator Tool                    : Adobe InDesign CS (3.0.1)
Rendition Class                 : proof:pdf
Derived From Instance ID        : 77dd99dc-86fd-11d9-9f9c-bf1c7c4428b2
Derived From Document ID        : adobe:docid:indd:77dd99db-86fd-11d9-9f9c-bf1c7c4428b2
Document ID                     : adobe:docid:indd:f5353f60-872e-11d9-84e6-bdf5ae01aa96
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Reference Instance ID  : uuid:01ae1f3c-8724-11d9-81b2-e88c9e38bb05, uuid:01ae1f3c-8724-11d9-81b2-e88c9e38bb05, uuid:01ae1f3c-8724-11d9-81b2-e88c9e38bb05, uuid:0329f014-8763-11d9-96e5-0003937c0de8, uuid:61bc7cdd-875e-11d9-96e5-0003937c0de8
Manifest Reference Document ID  : adobe:docid:photoshop:9b1feaf9-8723-11d9-81b2-e88c9e38bb05, adobe:docid:photoshop:9b1feaf9-8723-11d9-81b2-e88c9e38bb05, adobe:docid:photoshop:9b1feaf9-8723-11d9-81b2-e88c9e38bb05, uuid:04cda42d-875c-11d9-8af5-0003937c0de8, uuid:61bc6c6a-875e-11d9-96e5-0003937c0de8
Format                          : application/pdf
Title                           : H6239 Instruction Sheet.indd
Trapped                         : False
Creator                         : Adobe InDesign CS (3.0.1)
Producer                        : Adobe PDF Library 6.0
EXIF Metadata provided by EXIF.tools

Navigation menu