HP Color LaserJet CM6030, CM6040 MFP Series Service Manual. Www.s Manuals.com. Manual
User Manual: Multi-functional printer HP Color LaserJet CM6040 MFP - Service manuals and Schematics, Disassembly / Assembly. Free.
Open the PDF directly: View PDF
Page Count: 1212 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Product basics
- Control panel
- Paper and print media
- Understand paper and print media use
- Supported paper and print media sizes
- Supported paper types
- Special paper or print media guidelines
- Load paper and print media
- Configure trays
- Choose an output location
- Manage and maintain the product
- Information pages
- HP Easy Printer Care
- Embedded Web server
- Use HP Web Jetadmin software
- Security features
- Manage supplies
- Replace supplies
- Clean the product
- ADF maintenance kit
- Calibrate the scanner
- Upgrade the firmware
- Set the real-time clock
- Theory of operation
- Basic operation
- Formatter system
- Engine-control system
- Laser/scanner system
- Image-formation system
- Pickup, feed, and delivery system
- Jam detection
- Optional input trays
- Scanner component
- ADF
- Removal and replacement
- Removal and replacement strategy
- User-replaceable parts
- Service-replaceable parts
- Secondary transfer unit
- Multipurpose drive unit
- Multipurpose-tray guide (Tray 1) unit
- Cassette (Tray 2) pickup unit
- Rear-left cover
- Rear-right cover
- Rear cover
- Low-voltage power-supply unit
- High-voltage power supply PCA (A)
- Lifter-drive unit
- Fuser motor
- Intermediate-transfer belt (ITB) motor
- Face-down output bin
- Left cover
- Laser/scanner fan duct
- Print-cartridge driver PCA
- High-voltage power supply PCA (B)
- Formatter case
- DC controller PCA
- Environmental sensor
- Image-drum motor
- Fuser fan
- Print-cartridge feed motor (black)
- Print-cartridge feed motor (yellow, magenta, and cyan)
- Cartridge fan unit
- Laser/scanner fan unit
- Fuser power-supply unit
- Primary transfer-roller disengagement motor
- Print-cartridge drive unit (yellow and magenta)
- Print-cartridge drive unit (cyan and black)
- Print-cartridge interface PCA (cyan and black)
- Print-cartridge interface PCA (yellow and magenta)
- Main drive unit
- Cartridge fan duct
- Duplex switchback tray
- Front lower cover
- Inner cover
- Rear scanner cover
- Right upper cover
- Front door
- Front door assembly
- Color-misregistration and image-density sensor unit
- Pressure-release sensor unit
- Scanner cover
- Laser/scanner assembly (yellow and magenta)
- Laser/scanner assembly (cyan and black)
- VOC fan
- Duplexing reverse unit
- Face-down delivery unit
- Face-down cover
- Right-door assembly
- Duplexing feed unit
- Multipurpose-tray (Tray 1) pickup unit
- Thermopile unit
- Front-lower cover
- ITB duct
- Optional input trays
- Scanner
- Optical scanner
- Upper-left scanner cover
- Upper-right scanner cover
- Control panel
- Front scanner cover
- Lower-left scanner cover
- Lower-right scanner cover
- Top scanner cover
- Glass assembly
- Carriage unit
- Configure the SCB when replacing the carriage unit, inverter, SCB, or optical scanner
- Pulley assembly and motor unit
- Rail
- Inverter
- Lid sensor
- SCB, CPB, and SCUID
- Power-supply unit
- Scanner fan
- SCB fan
- Control panel fan
- Fan filter
- ADF
- Solve problems
- Introduction
- Troubleshooting process
- Tools for troubleshooting
- Solve performance problems
- Solve connectivity problems
- Control-panel message types
- Control-panel messages
- Event log messages
- Paper-handling problems
- Jams
- Common causes of jams
- Jam locations
- Clear jams
- Jam sensors
- AREA 1: Jams in the output bin
- AREA 2 and 3: Jams in the fuser and transfer area
- AREA 4: Jams in the duplex area
- AREA 5: Jams in Tray 2 and the internal paper path
- AREA 6:Jams in Tray 1
- AREA 7: Jams in optional Trays 3, 4, and 5
- AREA 8: Jams in the optional finishing devices
- AREA 9: Jams in the ADF
- Clear staple jams
- Jam recovery
- Product feeds multiple sheets
- Product pulls from incorrect tray
- Product feeds incorrect page size
- Paper does not feed automatically
- Paper does not feed from Tray 2, 3, 4, or 5
- Transparencies or glossy paper will not feed
- Envelopes jam or will not feed in the product
- Output is curled or wrinkled
- Product will not duplex or duplexes incorrectly
- Jams
- Solve image quality problems
- Interface troubleshooting
- Engine diagnostics
- LED diagnostics
- Engine-test button
- Troubleshooting menu
- Diagnostics mode
- Diagnostics that put the engine into the special diagnostics mode
- Diagnostic tests
- Disable cartridge check
- Paper-path sensors test
- Paper-path test
- Manual sensor test (special-mode test)
- Component tests
- Component test (special-mode test)
- Transfer-motors test
- Belt-only test
- Image-drum motors test
- CMYK-laser test
- Fuser-motor test
- Fuser pressure-release motor test
- Color-alienation motor test
- ITB-contact/alienation test
- Paper-transport motor test
- Tray-1 pickup-solenoid test
- Tray-2 pickup-motor test
- Duplexer reverse-motor test
- Duplexer refeed-motor test
- Print/stop test
- Color-band test
- Scanner tests
- Service-mode functions
- Solve scanner problems
- Solve fax problems
- Solve e-mail problems
- Diagrams
- Signals
- Output accessories and intermediate paper transfer unit (IPTU)
- Theory of operation
- Intermediate paper transfer unit (IPTU)
- 3-bin stapler/stacker
- Basic operation
- Feed drive system
- Intermediate-process output-bin assembly (stapler/stacker and booklet maker)
- Process output bin paper-stacking operation
- Offset operation
- Stack trailing-edge assist operation
- Stack delivery operation
- Staple operation (stapler/stacker and booklet maker)
- Shift the staple unit
- Stack operation (stapler/stacker and booklet maker)
- Jam detection
- Power supply
- HP Booklet Maker/Finisher accessory
- Basic operation
- Basic operation for the booklet maker
- Control of the inlet flappers
- Control of paper movement
- Alignment of paper
- Control the phase of the crescent roller
- Overview of folding
- Control of stack movement
- Fold the stack
- Double folding a stack
- Intermediate-process-tray assembly
- Staple operation
- Stack operation
- Jam detection
- Power supply
- Specifications
- Removal and replacement
- Intermediate paper transfer unit (IPTU)
- Stapler/stacker and Booklet maker
- Identify the booklet maker and stapler/stacker
- Remove the booklet maker and stapler/stacker from the printer
- External covers
- Drive system
- Document feed system
- Operation-tray assembly
- Output-bin 1
- Output-bin 2
- Upper output bin (stapler-stacker only)
- Buffer rollers
- Booklet-delivery output bin (booklet maker only)
- Booklet-delivery output bin unit (booklet maker only)
- Return roller unit
- Pressure roller unit
- Entrance upper guide unit
- Upper-delivery guide (booklet maker only)
- Inlet feed unit (stapler-stacker only)
- Inlet feed unit (booklet maker only)
- Paper-folding roller (booklet maker only)
- Electrical system
- Solve problems
- Theory of operation
- Parts and diagrams
- Service and support
- Product specifications
- Regulatory information
- Compliance with FCC regulations
- Declaration of Conformity
- Declaration of Conformity
- Environmental product stewardship program
- Protecting the environment
- Ozone production
- Power consumption
- Toner consumption
- Paper use
- Plastics
- HP LaserJet print supplies
- Return and recycling instructions
- Paper
- Material restrictions
- Disposal of waste equipment by users in private households in the European Union
- Material Safety Data Sheet (MSDS)
- For more information
- Certificate of volatility
- Safety statements
- Index