I.MX Linux® User's Guide Linux
User Manual:
Open the PDF directly: View PDF
Page Count: 57
- Overview
- Introduction
- Basic Terminal Setup
- Booting Linux OS
- Software overview
- Manufacturing Tool
- Preparing an SD/MMC card to boot
- Downloading images
- How to boot the i.MX boards
- Booting from an SD card in slot SD1
- Booting from an SD card in slot SD2
- Booting from an SD card in slot SD3
- Booting from an SD card in slot SD4
- Booting from eMMC
- Booting from SATA
- Booting from NAND
- Booting from SPI-NOR
- Booting from EIM (Parallel) NOR
- Booting from QuadSPI or FlexSPI
- Serial download mode for the Manufacturing Tool
- How to build U-Boot and Kernel in standalone environment
- How to build imx-boot image by using imx-mkimage
- Flash memory maps
- Running Linux OS on the target
- Enabling Solo Emulation
- Power Management
- Multimedia
- i.MX multimedia packages
- Building limited access packages
- Multimedia use cases
- Pulseaudio input/output settings
- Installing gstreamer1.0-libav into rootfs
- Graphics
- Security
- Connectivity
- Revision History