Jovision Ip Camera Jnvr User Manual
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 57
| Download | |
| Open PDF In Browser | View PDF |
IP Camera User Manual Contents 1. JNVR..................................................................... 4 1.1. Introduction....................................................... 4 1.2. Features........................................................... 4 1.3. Requirements....................................................... 4 2. JNVR System and Functions ................................................ 6 2.1. Interfaces and Menus ............................................... 6 2.2. Zero Touch IPC Connection .......................................... 7 2.3. Device Management .................................................. 8 2.3.1. Search and Add ............................................... 8 2.3.2. Add Camera Manually .......................................... 9 2.3.3. Remove Camera ............................................... 10 2.3.4. Modify Channel .............................................. 10 2.3.5. Channel Status .............................................. 12 2.3.6. Set Auto IP ................................................. 13 2.4. JNVR Settings..................................................... 14 2.4.1. Channel Setting ............................................. 14 2.4.2. Record Setting .............................................. 16 2.4.3. Alarm Input and Alarm Output ................................ 17 2.4.4. Alarm E-mail ................................................ 19 2.4.5. User Management ............................................. 21 2.4.6. System Setting .............................................. 22 2.5. Recording......................................................... 24 2.5.1. Manual Recording ............................................ 24 2.5.2. Scheduled Recording ......................................... 24 2.5.3. Playback .................................................... 25 2.6. More Functions.................................................... 26 2.6.1. Snapshot .................................................... 26 2.6.2. System logs ................................................. 26 2.6.3. Alert-Map ................................................... 27 2.6.4. Bootupdate Tool ............................................. 28 3. Camera Remote Settings .................................................. 30 3.1. System............................................................ 30 3.1.1. System Setting .............................................. 30 3.1.2. Storage ..................................................... 31 3.1.3. User Setting ................................................ 32 3.1.4. Maintenance ................................................. 34 3.1.5. Logs........................................................ 36 3.2. Stream............................................................ 36 3.2.1. Video....................................................... 37 3.2.2. Audio....................................................... 38 3.2.3. Region Cover (Privacy Mask) ................................. 39 3.2.4. Image....................................................... 40 3.3. Alarm............................................................. 3.3.1. Motion Detect ............................................... 3.3.2. Alarm-In .................................................... 3.3.3. Alarm Parameters ............................................ 3.3.4. Scheduled Capture ........................................... 3.4. Network........................................................... 3.4.1. Ethernet .................................................... 3.4.2. PPPOE....................................................... 3.4.3. WIFI........................................................ 3.5. PTZ............................................................... 3.5.1. Preset...................................................... 3.5.2. Patrol...................................................... 3.5.3. Path and Watch .............................................. 3.5.4. Scan........................................................ 3.5.5. Assist...................................................... 3.5.6. RS-485...................................................... 3.5.7. RS232....................................................... 3.6. IVA............................................................... 3.6.1. Regional .................................................... 3.6.2. Cordon...................................................... 3.6.3. Alarm out ................................................... 43 43 44 45 46 46 47 47 47 49 49 50 50 51 52 52 53 54 54 54 56 1. JNVR 1.1. Introduction JNVR is a video surveillance system for Windows® PC, developed by Jovision. With stable CloudSEE® network transmission technology, efficient audio and video coding system and image display technology, JNVR can provide smooth HD camera picture. This software can work perfectly with Jovision IP cameras, it can also connect IP cameras from other company through ONVIF protocol. 1.2. Features 1. 2. 3. 4. Device Management: Jovision IP cameras, ONVIF IP cameras supported; Screen Layout: Channel sorting, channel pop-up, multiple monitors display; Recording: Regular record, scheduled record, alarm record with mp4 standard; Video Adjust: Stream, bitrate, fps, video bright, video contrast adjustment supported; 5. Alarm Function: Alarm record, alarm snapshot, alarm sound, alarm E-mail; 6. Playback: Time line, fast play, snapshot, video editing supported; 7. Remote Connection: Connect cameras with CloudSEE technology. 1.3. Requirements Operating system: Windows XP/7/8/8.1/10 Recommended Requirements: * Channels Intel CPU AMD CPU Graphic RAM HDD 4 Pentium G620 A6-5400+ - 1G 1T 9 Pentium G620 A6-5400+ - 2G 2T 16 Pentium G620 A6-5400+ - 2G 4T 24 I3-2105 A6-3500 HD6570/GTX 250 4G 6T 30 I5-2405 A6-5600 HD6570/GTX 250 4G 8T 36 I7-2600 A6-5800 HD6570/GTX 250 4G 10T *: The hard disk capacity is calculated for 10 days’ record storage. Minimum Requirements: Channels Intel CPU AMD CPU 1 Celeron D series Athlon 2800+ 4 Celeron D series/E21xx Athlon 5000+ 9 Pentium E5x00 Athlon II X2 250 16 Pentium E6x00 Athlon II X4 640 2. JNVR System and Functions 2.1. Interfaces and Menus Main Interface: Video Monitoring Section Function Section Function Menu: Right-Click Menu: Start/Stop channel recording Take a snapshot of this channel Send this channel to second monitor if available Open JNVR settings Open camera remote settings Use PTZ function (For PTZ camera only) Adjust image parameters Change channel parameters Remove this channel and disconnect the camera About JNVR Icon Description More functions Audio On/Off Set E-mail sender information Computer network information Hide/show function menus automatically Hide/show function menus manually Minimize JNVR Exit JNVR 2.2. Zero Touch IPC Connection Make sure all the IP cameras are installed and connected properly, then run JNVR, JNVR will search and connect IP cameras automatically in LAN for the first-timeuse or there is no camera added before. As shown below. 2.3. Device Management All the IP cameras in LAN can be searched added, deleted or edited here. 2.3.1. Search and Add 1. Run JNVR, click “Devices” icon to open IP camera management page. 2. Click “Search More”to search for all the cameras in LAN, and camera information including camera name, CloudSEE ID, IP address, Channel status are listed. As is shown below. 3. Select one camera and click > to add this camera into JNVR, you can also use >> to add all the cameras in the searching list. Note: JNVR will automatically connect the added device with default network camera account (Username: abc Password: 123), if you have changed the camera access password, the device cannot be connect and show “Wrong Password” in Channel Status. Double click the camera name, and input correct username and password, click OK, the camera will be connected automatically. 2.3.2. Add Camera Manually The previous part 2.3.1 Search and Add described how to search and add cameras in the same LAN. If the camera is not in the same LAN with your PC and has been connected to Internet, you can manually add this camera with CloudSEE ID. Click “Manually add”, input the CloudSEE ID, username and password, click “OK”, then the camera will be added. 2.3.3. Remove Camera Select one added camera and click < to remove the camera from the connected list. Click << to remove all the connected camera. 2.3.4. Modify Channel 1. Select one added camera and right click in the connected list, click “Modify Channel”. 2. The device parameters dialog box will appear, you can input camera access account here. 3. Click “Network” to open network settings dialog box. You cannot change network parameters if DHCP function is enabled, all the parameters are from router. If you disabled DHCP function, you can change camera’s IP, mask, gateway, or DNS according to your needs. 2.3.5. Channel Status Camera information including network status, HD stream, SD stream, real-time video and record. The information can help you to locate the problem and troubleshoot the problem. Click “Channel Status” in device management page to view the status. Network Status No. Status Description 1 Very Good The camera connection is very good 2 Good The camera connection is good 3 General The camera connection is not bad 4 Bad Bad connection, need to check network 5 Very Bad Bad connection, need to check network 6 Disconnected The camera has disconnected, need to check network error 7 Inspecting JNVR is detecting the connection, please wait Stream Status No. Status Description 1 Connecting JNVR is connecting the camera 2 Connected The camera has been connected in JNVR 3 Wrong Password The camera cannot be connected due to wrong password 4 Timeout The camera cannot be connected, troubleshooting is needed 5 Rebooting The camera is rebooting. 6 Service Broken The camera cannot be displayed, troubleshooting is needed 7 Connection Limited Too many clients are connecting this camera, remote connection limitation is reached, please disconnect the camera on other clients. Video Preview/Record No. Status Description 1 Preview Normal Real-time video is displaying in JNVR 2 Preview Abnormal When encounter this information, please try the following instructions: ① Remove the camera and add it again ② Make sure the connection is good. 3 Record Normal The video is recording and can be checked in playback 4 Record Abnormal When encounter this problem, please try the following instructions: ① Enable record function manually ② Make sure the hard disk is well connected and can work. 5 Inspecting JNVR is detecting the status, please wait 2.3.6. Set Auto IP This function can solve IP conflict and IP error by re-assigning IP for all the cameras. If there is IP conflict or IP error problem, please click “Set AutoIP” in device management page, JNVR will prompt that “Are you sure to set AutoIP for all Channels?”, click OK to confirm. 2.4. JNVR Settings 2.4.1. Channel Setting Click “Setting” icon in function menu “Channel Setting” tab. You can access privacy mask function, pop-up function, Please select a channel in channel list parameters for the channel. You can use and setting page will appear. Select video stream settings, OSD settings, etc. on the left first, and then set the different settings for each channel. Item Description Note HD Stream Used for recording SD Stream Used for remote connection Network Stream Used for mobile phone app Resolution Resolution is the width and height dimensions of the camera imaging in pixels. A higher display resolution in a display of the same size means that displayed content appears sharper. Users can set the resolution for each stream and each channel. FPS Frame rate, also known as frame frequency, is the frequency (rate) at which an imaging device displays consecutive images called frames. The higher frame rate is, the more consecutive video becomes. Users can set the FPS for each stream and each channel. Bitrate Bitrate is the average number of bits per Users can set second passing between camera and JNVR. A higher bitrate means that the stream quality is better but which will use more bandwidth and storage space. the FPS for each stream and each channel. Previewing Real-time video will be displayed in main interface when enabled. Otherwise, the channel will display “Connected” only. The record and snapshot function can work normally whether preview is enabled or not. Pop-Up This channel won’t pop-up in new window when using pop-up function if enabled. Masking Privacy mask enables you to cover certain areas on the live video to prevent certain spots in the surveillance area from being live viewed and recorded. Area Click and drag the mouse in the picture to draw the mask area. You are allowed to draw up to 4 areas on the same image. Release left mouse button to finish drawing and right-click to cancel the areas. Click Save to save the settings. E-PTZ If E-PTZ is enabled, you can select a realtime video channel and use mouse wheel to zoom in the video. Use left button to drag the picture to see other area. Time Checking Camera time will be synchronized with JNVR time when connected in JNVR if this checkbox is enabled. Keep Scaling Use original width to height ratio video for real-time display and recording. Channel Name You can define a name for the camera which will be displayed on the video. OSD Location Change the position of OSD displaying, there are five modes: up-left, up-right, down-left, down-right, and hide OSD. Default Reset all the settings to default. Apply to All Apply current channel settings to all channels Check the checkbox of Enable Masking to enable this. Max. characters 16 2.4.2. Record Setting Click “Setting” icon in function menu “Alarm in” tab. You can choose record mode, etc. Please select a channel in channel list parameters for the channel. You can use and setting page will appear. Select partition, use scheduled recording on the left first, and then set the different settings for each channel. Item Description Note File Storage Choose the partitions for this channel in which video files will be stored. Partition C is unselected by default, and partitions with less than 5GB free space is not selectable. Reserved Disk Space JNVR will overwrite or stop recording when the free space of a partition is less than the value you set The range is 2G~8G. Packing Time Recording files are packed every 30 minutes by default You can choose 10~60 minutes as packing time Overwrite Previous Records When there is no available disk space, JNVR will overwrite earliest records. Stop Recording and Remind user When there is no available disk space, JNVR will stop recording and prompt. Enable Scheduled Recording Set a time period during which the channel will record. Default Reset all the settings to default. Apply to All Apply current channel settings to all channels 2.4.3. Alarm Input and Alarm Output This section explains how to configure JNVR to respond to alarm events, including motion detection, video lost. These events can trigger the linkage methods, such as start record, sound alarm, etc. Alarm input Click “Setting” icon in function menu and setting page will appear. Select “Alarm in” tab. You can set even that can trigger the alarm. Please select a channel in channel list on the left first, and then set the parameters for the channel. You can use different settings for each channel. Item Description Video Lost Detecting When enabled, if the real time video lost or disconnected, alarm will be triggered. And JNVR will response as alarm output Note settings Motion Detecting Motion detection detects the moving objects in the configured surveillance area, and a series of actions can be taken when the alarm is triggered. Sensitivity Set the sensitivity of motion detection, drag the slider to set proper value, the higher number is, the more sensitive detection is. Area Click and drag the mouse in the picture to draw the detection area. You are allowed to draw up to 4 areas on the same image. Release left mouse button to finish drawing and right-click to cancel the areas. Click Save to save the settings. Default Reset all the settings to default. Apply All to In order to detect the moving objects accurately and reduce the false alarm rate, please select detection area and sensitivity. Check the checkbox of Enable Motion Detecting to enable this button. Apply current channel settings to all channels Alarm output Click “Setting” icon in function menu and setting page will appear. Select “Alarm out” tab. Check the checkbox to select the linkage method taken for the channel alarm. Please select a channel in channel list on the left first, and then set the parameters for the channel. You can use different settings for each channel. Item Description Alarm Lasting Time Set a time the alarm will last for when alarm is triggered, new alarm will not be triggered until previous alarm is finished. Start Recording JNVR will start recording when alarm is triggered. Snapshot When Alarm Detected JNVR will snapshot when alarm is triggered. Alarming When Alarm Detected JNVR will play alarm sound when alarm is triggered. E-Map Pop-up When Alarm Detected JNVR will pop up e-map when alarm is triggered. Default Reset all the settings to default. Apply to All Apply current channel settings to all channels 2.4.4. Alarm E-mail There are two methods to send an alarm E-mail, JNVR alarm E-mail and IP camera alarm E-mail. JNVR alarm E-mail function is based on the JNVR software, when received alarm signal from IP camera, JNVR can send an alarm E-mail to the receiver to be notified. IP camera alarm E-mail is based on the embedded Linux system in the camera, the camera can send alarm E-mail if alarm is triggered. This section describes how to set JNVR alarm E-mail, you can refer to 3.3.3. Alarm Parameters for IP camera alarm E-mail settings. JNVR can be configured to send an Email notification to all designated receivers if an alarm event is detected, e.g., motion detection event, video loss, etc. Click “Setting” icon in function menu and setting page will appear. Select “E-mail Alert Setting” tab. Please select a channel in channel list on the left first, and then set the parameters for the channel. You can use different settings for each channel. Item Description Sending Email When Alarm Detected Enable alarm e-mail function Receiver Email ID The email address of user to be notified. Intervals(Minute) The interval refers to the time between two actions of sending e-mails Send Test E-Mail Click this button to test if the e-mail parameters work well, JNVR will send a test e-mail to the email address of user to be notified. Default Reset all the settings to default. Apply to All Apply current channel settings to all channels Note: E-mail sender parameters must be set before using JNVR alarm E-mail function. Click E-mail icon in the bottom right corner, E-mail information dialog box will appear. Please input the E-mail address and password of the sender. 2.4.5. User Management Click “Setting” icon in function menu and setting page will appear. Select “User Management” tab. You can create new user, edit current user, control user permissions for JNVR, etc. Note: This user management is for JNVR users only, if you want to manage IP camara users, please refer to 3.1.3. User Setting Item Description User List All the JNVR users are listed here, choose one user to edit. Username Input new username to be created Password Input password for the new user; Or you can select an existing user and then input new password, click OK to change password. Add After input new username and password, click “Add” to create new user Delete Select an existing user and click “Delete” to delete this account System Privilege Item Description Devices Users with this permission can access device management function, such as adding, deleting or editing cameras. Settings Users with this permission can access JNVR settings, such as channel setting, record setting, alarm in/out, user management, etc. Record Users with this permission can enable/disable record. Playback Users with this permission can access playback functions and controls Layout Users with this permission can change screen layout. Image Control Users with this permission can change image settings. PTZ Control Users with this permission can access PTZ function. Snapshot Management Users with this permission can manage snapshots. Audio Monitoring Users with this permission can enable audio monitoring. Remote setting Users with this permission can access IP camera remote settings. Exit System Users with this permission can exit the JNVR software. Remote Privilege (For some models only) refer to Item Description Visit Channel User can only view and access specified channel remotely Record Users with this permission can enable/disable record. Playback Users with this permission can access playback functions and controls PTZ Users with this permission can access PTZ function. 2.4.6. System Setting Click “Setting” icon in function menu and setting page will appear. Select “System” tab. You can access advances JNVR settings. Item Description Sequence Interval The interval refers to the time between two channels when enable sequence display (Channels display in turn). Scheduled Restart You can set automatically. Auto Lock System JNVR will be locked if there is no operation for a certain time, Users need to unlick JNVR with correct password. Auto-Run Start JNVR with Windows Shutdown the PC When Exiting System Windows will power off after exiting JNVR. Disable CTRL+ALT+DEL Disable CTRL+ALT+DEL command. Support Windows 2000/XP only. Low-Performance Mode PC a time for the camera to reboot Improve video fluency on some old PC. Enable WAN Mode You can add and connect cameras out of the LAN by CloudSEE ID. Smooth mode on the Internet JNVR will adjust the stream of cameras according to the network condition. This may lower video quality. NVSIP Protocol Enable NVSIP protocol to improve the compatibility with cameras from other company. 2.5. Recording 2.5.1. Manual Recording Right click on the real time video, select “Start Recording” to start recording for this channel; Click “Record All” icon to start record for all the channels. If the channel is recording, there will be a recording icon showing in the channel window. You can use “Stop Recording” in right click menu or “Stop All Recording” in function menu to stop current record task. 2.5.2. Scheduled Recording Click “Setting” icon – Record Setting – Enable Scheduled Recording, check the checkbox and set a period to start channel recording. 2.5.3. Playback 1. Click “Playback” icon to open playback interface. 2. Choose record date and check the channel number to start playback. Button Description Button Description Apply operations to all channels 4/9/16 CH playback screen layout supported. Hide Panel/ Minimize/ Close 1/16X, 1/8X, 1/4X, 1/2X, 1X, 2X, 4X, 8X, 16X Play speed. Open video file Play Pause Backward Forward Backup video files Edit video file Snapshot Enable audio/volume Disable audio 2.6. More Functions 2.6.1. Snapshot Select a real time video channel and right click, select “Snapshot” or click the “Snapshot” icon in function menu to save current frame as picture. You can check the snapshots by clicking [More function icon - Snapshot Viewer], the snapshot viewer window will appear. Choose the date and channel you want to check and click “Search”, snapshots will be listed on the right. Double click to open the image. 2.6.2. System logs JNVR logs or software information can be found in [More Function- System logs]. Event logs record events taking place in the execution of JNVR in order to provide an audit trail that can be used to understand the activity of the system and to diagnose problems. 2.6.3. Alert-Map You can upload .jpeg or .bmp image as Alert-map, set camera position and show camera video in [More Function- Alert-Map]. 1. In alert-map page, right click and select “Load E-map” to select an image as map, it can be a traditional map or a floor plan. 2. There will be several eye icons if you have cameras connected, an eye icon indicates a camera. Right click on the icon and select “Show Video” to play live video on the map. 3. You can drag the icon and video window according to the real position of the camera on the map. 2.6.4. Bootupdate Tool Bootupdate is a tool to flash camera software, users can use this tool to reset/recover a camera. [More Function- Bootupdate tool], Select the folder containing update files for IPC by clicking “browse”. Power on the IPC and make sure the LAN network connection is fine, never mind even if the IPC has not been listed. Click “Start Updating” first, and then, power off the IPC and power on again. The tool will search and list the camera and start transmitting and updating. You can see the progress in the program. Sending data Updating When the program shows that update finished, please disconnect the network of IPC or close the tool, otherwise, the IPC may update again after reboot Completed 3. Camera Remote Settings As an independent device with embedded Linux, a network camera can be accessed and configured by JNVR. “Remote Setting” function can only configure one selected network camera at a time, including System, Stream, Alarm, Network, PTZ, IVA management, as shown below. Remote Setting Function Panel 3.1. System 3.1.1. System Setting [Remote Settings- System- System Settings]. Camera name, OSD settings, language, time and date can be set here. Items Description Device Name The name of the device can be changed here, which will display on live video window. Product Type The factory model of the camera. Language Log language can be changed here. The camera menu language is depending on the JNVR language. Version Camera firmware version. CloudSEE Port Port number for CloudSEE service, DO NOT change unless there is port conflict with other device. Product SN Product serial number. OSD Position Change the position of OSD information: left-top, left-bottom, right-top, right-bottom or hide. Time Position Change the position of OSD time: left-top, left-bottom, righttop, right-bottom or hide. CloudSEE ID Device ID is used for remote connection if the device is online. QR Code Generate CloudSEE QR code, which can be used to add this camera by scanning QR code in CloudSEE app. (For some model only) CloudSEE Nickname You can input a nickname for the camera. Enable Large OSD Use large OSD if the camera is in high resolution. Service Port Port number for camera connection service, cannot be changed. Time Automatic Camera will synchronize time with NTP server automatically. Time Zone Change time zone. NTP Server The default NTP server is almost always a good choice, but if you prefer to use another NTP server, you can enter it here. NTP Interval The period between two time-synchronization events. Date… Set the format of date and time. Register Register product on server, if the camera is connected but not online. Default Setting Restore default system settings. 3.1.2. Storage [Remote Settings- System- Storage]. This function is for cameras with storage card, users can manage storage here. Item Description Device List You can select the storage card installed in the camera. Refresh Lists Refresh the device list Device Status You can check the status of the storage card. Used Space The storage information is shown here. Format Format the storage card Record Type You can choose record mode for the camera. Record File Time Recording files are packed every 10 minutes by default 3.1.3. User Setting As an independent Linux system embedded in it, a camera can be only accessed by correct account. You can manage users for the camera in [Remote Settings- SystemUser Setting]. Note: The build-in account admin cannot be deleted. If the build-in account admin has not been modified, you can login with any username and password. The maximum number of users is 13. You should change this default password to better protect against security risks, such as the unauthorized access by others to the product that may prevent the product from functioning properly and/or lead to other undesirable consequences. Items Description Add Account Click “Add”, input username and password, select user group and click OK to create new user. Modify Select a user in the list, click modify to change password. Group There are three groups built in the system, to which you can assign users. Administrator: Administrators have permissions to access all the functions and operations. Common User: Common users can access parts of the functions, system level operations such as rebooting, performing system recovery, setting network, etc. are not permitted. Guest: Guests can only watch the live video without any other permissions. Refresh Refresh user list. Delete Select a user, click this button to delete. 3.1.4. Maintenance You can update or reset the camera in [Remote Settings- System- Maintenance]. Note: Inappropriate maintenance operations would do damage to the camera or cause camera system fault, please contact with your local dealer for more information. Items Description Web Update The device will check for available software updates on update server via Internet. File Update The device will update with the update files on the computer in the same local network. (Strongly recommended) Select… When “File Update” is selected, use this button to browse and select the directory containing update files. Update Begin Reboot on Time Start the selected update procedure. Set a time to reboot the device. Progress Indicates the progress of updating. Diagnosis Detect the network connections to help to locate connection problem Restart Reboot the camera Recovery Erase all settings and data, restore the device to its factory settings. Web Update 1. Connect the camera with our remote client software, select the channel of the camera you want to update, right click on the live video, and select Remote Settings- System-Maintenance, the maintenance dialog appears. 2. The default update mode is “Web Update”, select update server from the second drop-down menu. 3. Click “Update begin”, System asks for confirmation of update, click “Yes”. 4. Update begins, the progress bar will run twice, one indicates downloading progress and another indicates burning progress. 5. After downloading and burning, the update completes, System will ask for confirmation of restarting, click Yes to confirm. 6. The device will restart and connect automatically. File Update 1. Connect the camera with our remote client software, select the channel of the camera you want to update, right click on the live video, and select Remote Settings- System-Maintenance, the maintenance dialog appears. 2. The default update mode is “Web Update”, select “File Update” from the drop-down menu, and click Select to browse and select the directory containing update files. 3. Then click “Update begin”, system will start burning progress. If you choose wrong update file directory, System will prompt that “Open update file failed, please check if the update file exists”, you need to check the update files and select correct files. System asks for confirmation of update, click “Yes”. 4. Update begins, the progress bar will run twice, one indicates downloading progress and another indicates burning progress. 5. After downloading and burning, the update completes, System will ask for confirmation of restarting, click Yes to confirm. 6. The device will restart and connect automatically. 3.1.5. Logs Event logs record events taking place in the execution of the system in order to provide an audit trail that can be used to understand the activity of the system and to diagnose problems. Items Description List Type List the logs by page or date. Refresh Refresh the logs Print Print the logs Save Save the Logs as txt file on the computer. 3.2. Stream Our network camera supports duel stream or triple stream for different usage: Video Stream 1: Also called main stream or recording stream, used for recording, and if there is no more than 4 channels displaying on JNVR, this stream will be displayed. Video Stream 2: Also called sub-stream, used for live view if more than 4 channels displaying on JNVR. Mobile Phone Stream: Also called Internet-stream, used for displaying on mobile phones which costs the least network bandwidth. Phone app can choose proper steamer according to the network status on latest CloudSEE app, 3.2.1. Video Items Description Resolution Resolution is the width and height dimensions of the camera imaging in pixels. A higher display resolution in a display of the same size means that displayed content appears sharper. Frame Rate Frame rate, also known as frame frequency, is the frequency (rate) at which an imaging device displays consecutive images called frames. The higher frame rate is, the more consecutive video becomes. MBPH(Kbps) Bitrate Bitrate is the average number of bits per second passing between camera and JNVR or NVR. A higher bitrate means that the stream quality is better but which will use more bandwidth and storage space. QP Level The quality of the video. Bitrate Control VBR: Variable Bit Rate, VBR files vary the amount of output data per time segment. VBR allows a higher bitrate (and therefore requires more storage space) to be allocated to the more complex segments of video files while less space is allocated to less complex segments. CBR: Constant Bit Rate, CBR means that the rate at which a codec's output data should be consumed is constant. Lower bitrate is useful for streaming multimedia content on limited capacity channels since it is the maximum bit rate that matters, but it cannot allocate enough data for complex sections. Higher bitrate will provide enough bits for the entire coding process, though the size of the file at the end would be proportionally larger. Select An Area (ROI) Default Settings 3.2.2. Regions of interest, select an area to focus on the scene, which may lower the quality of the unselected area. Restore default system settings. Audio 1. Connect the pickups or microphone to the camera, and power on all the devices. 2. Connect the camera with JNVR, and on the channel click: Right click menuRemote setting- Stream- Audio, the audio setting dialog appears. 3. Select “Audio-In Enable” to enable audio encoding function. If the checkbox is not selected, there will no sound even if audio-in device is connected. 4. Select proper Audio Encode Type from the drop-down menu, which should be the same as connected NVR if you use NVR. There are five audio encode types: PCM, G117A, G117U, G726 40K, ADPCM. 5. In JNVR, right click on the live view channel, click audio icon to monitor the audio from microphone; On NVR, select the live window to monitor the audio. 3.2.3. Region Cover (Privacy Mask) This function allows you to cover an area with a black block, both in live view and recording. Supports up to 4 private areas. Drag the mouse and draw a rectangle covering on the area you want. Right click on the rectangle to cancel the area. Items Description Enable Private Area Enable private Area function. Refresh Get the latest view picture Save Save the settings. Default Settings Restore default system settings. 3.2.4. Image Brightness, contrast, saturation, sharpness and other settings about image can adjusted and configured here. Items Description Contrast Set the difference in luminance or color that makes display distinguishable. Brightness Set the brightness of the video. Saturation Saturation is the colorfulness of a color relative to its own brightness. A highly saturation is vivid and intense, while a less saturation appears more muted, closer to gray. Sharpness Set the subjective perception of sharpness that is related to the edge contrast of the image. Light Intensity (sensitivity) Set the sensitivity of the photo resistance. (For some models only) Scene Support Indoor, Outdoor, Default, Soft. Day Night Mode Select the mode of day-night switching, support Auto, Always Color, Always Black/White, Time Color. Rotate Support rotate 0°, 90°, 180°, 270°. Exposure Set the period of exposure, the camera will adjust automatically in the range. If the is power frequency interference, you can adjust exposure time to avoid it. AWB AWB can compensate for the slight color differences in different types of light, or make the colors warmer or cooler to match the intended mood of your video. Low-light Operation Enable this function to improve the night vision effect. Night Selfadaption With night self-adaption, camera can adjust night vision effect according to the object. WDR Wide Dynamic Range: With WDR, a camera can record greater scene details, from shadows to highlights than normal. Mirror Show the mirror image of the video, in which the right side of the original object appears on the left and the left side appears on the right Turn Make the picture upside down. Defog Select the function in fog weather to improve the clarity. Default Settings Restore default system settings. 3.3. Alarm 3.3.1. Motion Detect Motion detection detects the moving objects in the configured surveillance area, and a series of actions can be taken when the alarm is triggered. Steps 1. Highlight Enable check-box to enable full-screen motion detect. 2. Click and drag the mouse on the live video to draw a motion detection area, you can choose 4 areas at most for one channel. Sensitivity can also be set here. 3. Click OK to save the settings. Items Description Enable Enable motion detect function. Sensitivity Set the sensitivity of motion detect, the higher the number is, the higher sensitive the detection is Send Alarm to Client Send alarm to JNVR client software connecting the camera. Send Alarm E-Mail Send an email with alarm information to a user or users when an event occurs. Send Alarm to VMS Send alarm to VMS server. (CMS is a product of Jovion) Refresh Get the latest view picture Save Save the settings. Default Setting 3.3.2. Restore default system settings. Alarm-In If the camera supports alarm-in function, the function can be configured here. Items Description Alarm-In Enable Enable Alarm-In function. Alarm to Client Send alarm to client software connecting the camera. Alarm to Mail Send an email with alarm information to a user or users when an event occurs. Alarm to VMS Send alarm to VMS server. Alarm-In Record Start recording when alarm-in device is triggered Alarm Model Set alarm mode of the alarm-in device, Normally Open or Normally Closed. Alarm Buzzing Open If selected, the buzzer inside the NVR will buzz when alarming. Alarm-In Open Enable/Disable connected alarm-in device(s). Default Setting Restore default system settings. 3.3.3. Alarm Parameters Items Description Alarm Enable Enable alarm function to receive alarm information. Alarm Time Set the period of sending alarm messages. Alarm Duration Set the duration that one alarm lasts. Alarm Sound Enable alarming sound Sender Input E-mail address of the sender. Server Input the SMTP server of sending e-mail. User ID Username of sender Password Password of sender Port Input the port for SMTP Encrypt Choose the security protocols for SMTP Interval Set the interval of sending E-mails Receiver E-mail(s) to receive alarm e-mail VMS Server IP Set the IP of VMS server. VMS Server Port Set the port of VMS server. Delete Remove added E-mail Mail Test Send test e-mail to check whether these settings work fine Default Setting Restore default system settings. 3.3.4. Scheduled Capture Camera can capture video picture and send to specified Email with this function. 3.4. Network There are three network connection type: Ethernet, PPPOE and WIFI. You can choose according to your demand. Note: Not all models support these three connection types, the steps are for reference only. You can see network information in any connection type configuration page. Start AP. For wireless camera only. After configuring the network camera with wireless connection, and the camera are connected with Wi-Fi, the AP signal will be disabled. Use “Start AP” to enable AP again. 3.4.1. Ethernet Select “Self-adapting IP” and “DHCP”, if your network uses dynamic IP. Unselect “Self-adapting IP” and “DHCP”, and input the network information, if your network uses static IP. 3.4.2. PPPOE If you use PPPOE, you can input ID and password provided by ISP, click OK to connect. 3.4.3. WIFI Some models support Wi-Fi connection, click “Search” to scan wireless network, choose the SSID from the drop-down menu, input the password, and select authority and security type, click OK to connect. 3.5. PTZ In the live view interface, you can use the PTZ control buttons to realize pan/tilt/zoom control of the camera. Note: To realize PTZ control, the camera connected to the network must support the PTZ function or a pan/tilt unit has been installed to the camera. Please properly set the PTZ parameters on RS-485 settings page. 3.5.1. Preset Items Navigation Keys Description There are for direction arrows, Use to control the view of PTZ camera; Use to start rotating horizontally. Iris Adjust the iris of the camera. Focus Adjust the focus of the camera. Zoom Zoom in and zoom out Assist Speed Click to clean water on the lens with wipers. Click to turn on lights when it is dark. Adjust the speed of pan/tilt movements. Preset Preset number, 1 to 255, support 256 presets in total. Name Preset name, which can be modified to be recognized easier. Add Adjust the position of the camera view, click this button to add current view position as a preset. Delete Select a preset, and remove it with this button. Call This feature enables the camera to point to a specified preset scene manually or when an event takes place. For the defined preset, you can call it at any time to the desired preset scene. 3.5.2. Patrol Note: No less than 2 presets have to be configured before you set a patrol. Items Description Patrol List All the presets involved in patrol are listed. Patrol Path Choose the different paths of patrol. Preset Select the preset(s). Stay Time Patrol duration of the preset. Patrol Speed The speed of patrol. Add Add the preset to patrol. Delete Delete the preset to patrol. Start Start patrol. Stop Stop Patrol. 3.5.3. Path and Watch Function Introduction: Path: Set a patrol path manually by using direction arrows instead of presets, system will remember the path and save it. Watch: Set a view position and duration to watch the point. Items Description Path Choose the path you want to edit or use. Record Click Record and set a patrol path manually by using direction arrows, the path will be stored. Finish Click Finish to stop path recording and save it. Start Start selected path patrol. Stop Stop the path patrol. Watch Add the preset to patrol. Preset Select the preset used for watching. Wait Time Set the duration of watching. Start Start watching. Stop Stop watching. 3.5.4. Scan Items Description Speed Set the speed of scanning Left Limit Set left limit manually with direction arrows, Right Limit Set right limit manually with direction arrows, Start Scan Start scanning. Stop Scan Stop scanning Various Scan Use preseted various scanning style. 3.5.5. Assist You can set assist on/off and set/call/clear a preset in this page. You can also set scheduled patrol here. 3.5.6. RS-485 The RS-485 serial port is used to control the PTZ of the camera. The configuring of the PTZ parameters should be done before you control the PTZ unit. Steps: 1. Enter PTZ setting interface. 2. Set the RS-485 parameters and click Save to save the settings. By default, the Baud Rate is set as 2400 bps, the Data Bit is 8, the stop bit is 1 and the Parity and Flow Control is None. Note: The Baud Rate, PTZ Protocol and PTZ Address parameters should be exactly the same as the PTZ camera parameters. 3.5.7. RS232 Steps: 1. Enter RS-232 Port Setting interface. 2. Click Save to save the settings. Note: If you want to connect the camera by the RS-232 port, the parameters of the RS232 should be exactly the same with the parameters you configured here. 3.6. IVA 3.6.1. Regional Regional, or intrusion detection function detects people, vehicle or other objects which enter and loiter in a pre-defined virtual region, and some certain actions can be taken when the alarm is triggered. Note: Intrusion detection function varies according to different camera models. Steps: 1. Enter the Regional Detection settings interface 2. Check the checkbox of Enable IVA to enable the function. 3. Select the region from the drop-down list for detection settings. 4. Click on the live video to specify the four vertexes of the detection region, and double-click to complete drawing. 5. Repeat the above steps to configure other regions. Up to 4 regions can be set. You can click the Clear button to clear all pre-defined regions. 6. Click Save to save the settings. 3.6.2. Cordon Cordon, or line crossing detection function detects people, vehicle or other objects which cross a pre-defined virtual line, and some certain actions can be taken when the alarm is triggered. Note: Line crossing detection function varies according to different camera models. Steps: 1. Enter the Cordon settings interface. 2. Check the checkbox of Enable IVA to enable the function. 3. Click-and-drag the line, and you can locate it on the live video as desired. 4. Select the direction for line crossing detection. And you can select the directions as A<->B, A ->B, and B->A. A<->B: Only the arrow on the B side shows; when an object going across the plane with both directions can be detected and alarms are triggered. A->B: Only the object crossing the configured line from the A side to the B side can be detected. B->A: Only the object crossing the configured line from the B side to the A side can be detected. 5. Repeat the above steps to configure other lines. Up to 4 lines can be set. You can click the Clear button to clear all pre-defined lines. 6. Click Save to save the settings. 3.6.3. Alarm out Items Description Sensitivity Set the sensitivity of detecting moving objects. The higher the value is, the more easily the movement can be detected. Threshold The value of the threshold defines the grey-scale of the object which can trigger the alarm. When the threshold is high, the object can trigger the alarm easier. Stay Time The time of the object stay in the region, after which can trigger the alarm. If you set the value as 0, alarm is triggered immediately after the object entering the region. Draw Area or Line Display the cordon, or line crossing detection line on live video. Alarm Twinkle the Area Flicker the intrusion detection area on live video when alarm is triggered. Mark Warning Object Make the object that triggered the alarm. Mark All Moving Object Make all moving object in the video. Alarm Record Start recording when IVA alarm is triggered Alarm Out Send alarm to connected alarm device. Alarm to Client Send alarm to client software connecting the camera. Alarm to E-Mail Send an email with alarm information to a user or users when an event occurs. Save Save the settings Default Setting Restore default system settings.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 57 Language : de-DE Tagged PDF : Yes Author : 姜鲁晓 Creator : Microsoft® Word 2016 Create Date : 2016:02:06 00:57:46+01:00 Modify Date : 2016:02:06 00:57:46+01:00 Producer : Microsoft® Word 2016EXIF Metadata provided by EXIF.tools