MU90 M90 110

User Manual: MU90

Open the PDF directly: View PDF PDF.
Page Count: 2

RELIABILITY
Robust 46°C ambient temperature rating
keeps the compressor running in hot
equipment rooms and minimises nuisance
shut-downs caused by fouled coolers
High dust inlet air filter extends the life of the
machine by helping to keep dirt out of
the compressor
Integral gear drive is permanently aligned
and requires no adjustments during the
course of normal operation
REDUCED OPERATING COSTS
8,000 hour Ultra Coolant™ reduces
maintenance costs by extending the time
required between coolant changes
Intellisys®microprocessor controller
Operates the compressor at peak efficiency
Reduces off-load running time
Allows easy sequencing
Continuously monitors key operating
parameters
Provides historical operating data
INCLUSIVE PACKAGING
400Volt/3phase/50Hz IP55 motors
400Volt/3phase/50Hz integrated
star-delta starter
Air-cooled aftercooler discharges air at an
8°C CTD
Air-cooled oil cooler
Condensate separator and drain trap
76 dB(A) quiet enclosure
1-year full package warranty1
5-year warranty on the drivetrain, separator
tank, and air-cooled coolers1
OPTIONAL SCOPE OF SUPPLY
Power Outage Restart- Automatically restarts
the compressor after a power interruption
Water-cooled coolers allow a maximum water
inlet temperature of 46°C
Electrical power supplies from 200 to
690Volts/3Phase/50 or 60Hz
The SSR range of compressors provide several benefits, including:
1Contact an authorised Ingersoll-Rand distributor for the details.
ROTARY SCREW AIR COMPRESSORS
SSR M90-110
Aircooled dimensions shown
A- 2” Air discharge
B- Condensate drain
C- Cooling air intake
D- Cable entry
E- Cooling air exhaust
F- Control panel
MODEL RATED NOMINAL CAPACITY WEIGHT
PRESSURE MOTOR POWER
bar(g) psi(g) kW hp m3/min cfm kg
ML90 7.5 109 90 125 16.7 590 2700
MM90 8.5 123 90 125 15.3 540 2700
MH90 10 145 90 125 14.0 494 2700
MU90 13 189 90 125 11.5 406 2700
ML110 7.5 109 110 150 20.0 706 2820
MM110 8.5 123 110 150 19.2 678 2820
MH110 10 145 110 150 17.5 618 2820
MU110 13 189 110 150 14.5 512 2820
www.air.irco.com/uk
Industrial Air Solutions
Ingersoll-Rand European Sales Limited
Swan Lane
Hindley Green
Wigan WN2 4EZ, UK
Tel: +44 (0) 1942 257171
Fax: +44 (0) 1942 254162
© 2004 by Ingersoll-Rand Company Limited.
Printed in the UK CPN 89213813
Ingersoll-Rand compressors are not designed, intended or approved for breathing air applications. Ingersoll-Rand does not approve specialised
equipment for breathing air applications and assumes no responsibility or liability for compressors used for breathing air service.
Nothing contained on these pages is intended to extend any warranty or representation, expressed or implied, regarding the product described
herein. Any such warranties or other terms and conditions of sale of products shall be in accordance with Ingersoll-Rand’s standard terms and
conditions of sale for such products, which are available upon request.
Product improvement is a continuing goal at Ingersoll-Rand. Designs and specifications are subject to change without notice or obligation.
ROTARY SCREW AIR COMPRESSORS
SSR M90-110

Navigation menu