Connection Guide Rev D XPS2 Man Naim Connections E
User Manual: XPS2
Open the PDF directly: View PDF 
.
Page Count: 35
| Download | |
| Open PDF In Browser | View PDF |
WORLD CLASS HI FI CONNECTION GUIDE Equipment Connection Panels and System Connection Schematics ISSUE 1 Introduction This connection guide, available only in Adobe PDF format, collects together illustrations of product connection panels and many of the most often used system connection diagrams. Most illustrations and diagrams can also be found in the appropriate product Owners Manual. This guide should not be seen as a replacement for specific Owners Manuals as these contain important safety and installation information as well as comprehesive installation and operation guidance CONTENTS Section Page Section Page 1 2 CD Players 1.1 CDS3 1.2 CDX2 1.3 CD5 3 1.4 CDS3/XPS2 1.5 CDX2/XPS2 4 1.6 CD5/Flatcap 2 2 5 Tuner 2.1 NAT 05 3 6 Headphone Amplifier 3.1 Headline 3.2 Headline/Hi-Cap 4 7 Phono Stage 4.1 Stageline 4.2 Stageline/NAC 112 4.3 Stageline/Flatcap 2 5 6 7 8 8 9 Preamplifiers 5.1 NAC 552 5.2 NAC 252 9 5.3 NAC 282 5.4 NAC 202 10 5.5 NAC 112 11 5.6 NAC 552/NAC 552PS 5.7 NAC 252/Supercap 12 5.8 NAC 282/Supercap 5.9 NAC 282/Hi-Cap 13 5.10 NAC 202/Hi-Cap 5.11 NAC 112/Flatcap 2 14 AV Processor 6.1 AV2 10 19 Power Amplifiers 8.1 NAP 500 20 8.2 NAP 300 8.3 NAP 250 21 8.4 NAP V145 8.5 NAP 200 8.6 NAP 150 22 8.7 NAP 6-50 8.8 NAP V175 23 Power Supplies 9.1 XPS2 9.2 Supercap 9.3 Hi-Cap 24 9.4 Flatcap 2 9.5 NAPSC 25 9.6 NAC 252/Supercap/ Hi-Cap 26 9.7 NAC 282/NAPSC/ Supercap x 2 27 9.8 NAC 282/NAPSC/Hi-Cap 9.9 NAC 282/NAPSC/ Hi-Cap x 2 28 9.10 NAC 202/Hi-Cap/ NAPSC 9.11 NAC 112/Flatcap x 2 29 Active Crossovers 10.1 SNAXO 362 10.2 SNAXO 242 10.3 SNAXO 362/Supercap 30 10.4 SNAXO 242/Hi-Cap 15 6.2 AV2/NAP 150/ NAP V175 31 10.5 SNAXO 362/ NAP 300 x 3 16 6.3 AV2/NAC 112/ NAP 150/NAP V175 32 10.6 SNAXO 362/ NAP 250 x 3 17 Integrated Amplifier 7.1 NAIT 5 33 10.7 SNAXO 242/ NAP 250 x 2 7.2 NAIT 5/Flatcap 2 18 7.3 NAIT 5/NAP 150 7.4 NAIT 5/Flatcap 2/ NAP 150 1 CDS3 CDX2 CD Players CD5 1.1 CDS3 Connection Panel optional RS232 data port XPS2 power supply connection socket RC5 input to preamplifier alternative RCA phono output sockets CDS3 Output Note The RC5 input fitted to the CDS3 is intended to accept external control signals for multiroom applications. Contact your dealer for further information on its use. ch1 out ch 2 out nc nc -ve 1.2 CDX2 Connection Panel power mains input optional RS232 data port RC5 input link plug fitted to preamplifier alternative RCA phono output sockets CDX2 Output Note The RC5 input fitted to the CDX2 is intended to accept external control signals for multiroom applications. Contact your dealer for further information on its use. ch1 out ch 2 out nc nc -ve 1.3 CD5 Connection Panel link plug fitted power mains input RC5 input to preamplifier Note The RC5 input fitted to the CD5 is intended to accept external control signals for multi-room applications. Contact your dealer for further information on its use. The CD5 features various technologies to reduce microphonic effects, in particular a compliant mounting for the main circuit boards and the DIN sockets on the rear. Some movement of the board and sockets when connecting/disconnecting is normal. 2 CD5 Output ch1 out ch 2 out nc nc -ve CDS3 CDX2 CD Players XPS2 1.4 CDS3 Connected to XPS2 Power Supply CDS3 XPS2 mains input 1.5 CDX2 Connected to XPS2 Power Supply CDX2 XPS2 mains input Note When used with an XPS2 the CDX2 must be disconnected from the mains. Always switch off the CDX2 when connecting or disconnecting an XPS2. cable direction marker Interconnect Cables CDS3/XPS2 Burndy 180° 5 to 5 pin DIN 3 CD5 CD Players Flatcap 2 1.6 CD5 Connected to Flatcap 2 Power Supply CD5 link plug removed power mains input Flatcap 2 power mains input cable direction marker 4 Interconnect Cables 240° 5 to 5 pin DIN Tuners NAT 05 2.1 NAT 05 Connection Panel RC5 input power mains input 75 ohm FM aerial to preamplifier Note NAT 05 Output The RC5 input fitted to the NAT 05 is intended to accept external control signals for multiroom applications. Contact your dealer for further information on its use. The NAT 05 features various technologies to reduce microphonic effects, in particular a compliant mounting for the main circuit boards and the DIN sockets on the rear. Some movement of the board and sockets when connecting/disconnecting is normal. cable direction marker ch1 out ch 2 out nc nc -ve Interconnect Cables 180° 5 to 5 pin DIN 5 Headline Headphone Amplifier Hi-Cap 3.1 Headline Connection Panel from power supply (NAPSC) or better) flying signal cable 3.2 Headline connected to Hi-Cap power supply Headline Connect to: NAC 552, NAC 252, NAC 282, NAC 202: Socket 4, 5 or 6. NAC 112, NAIT 5: Socket 3, 4 or 5. Hi-Cap mains input Interconnect Cables Captive 180° 5 pin DIN 5 pin DIN - 2 pin (SLIC) 6 Stageline NAC 112 Phono Stage Flatcap 2 4.1 Stageline Connection Panel RCA phono sockets and earth tag to preamplifier power supply or NAC 112/NAIT 5 AUX 2b socket 4.2 Stageline connected to NAC 112 (or NAIT 5) Stageline NAC 112 4.3 Stageline connected to Flatcap 2 Stageline to preamplifier. 4 to 5 pin DIN interconnect required Flatcap 2 power mains input cable direction marker Interconnect Cables 240° 5 to 5 pin DIN 4 to 5 pin DIN 7 NAC 552 Preamplifiers NAC 252 5.1 NAC 552 Connection Panel in 1 in 2 in 3 in 4 in 5 in 7 rc5 control in signal ground in 6 Inputs 1, 2 & 3 ch1 in ch 2 in in 8 ch 1 ch 2 NAC 552PS in in 9 ch 1 ch 2 NAC 552PS in Inputs 4, 5 & 6 ch1 in ch 2 in -ve Input 7 ch1 out ch2 out +ve ch 2 +ve ch1 -ve -ve 5.2 NAC 252 Connection Panel in 5 in 6 aux 1 aux 2 in 1 cd in 2 in 3 tuner tape in 4 a/v signal in 6 (alternative) ground Note The NAC 252 AUX 2 input is provided with two sockets. The lower socket, fitted on delivery with a blanking cover, is intended for use with a Stageline or Prefix phono stage and incorporates an appropriate DC power supply. The two sockets must not be used simultaneously. 8 Supercap in cd phono ch 1 ch 2 Inputs 1, 2 & 6 ch1 in ch 2 in aux 2 phono ch 1 ch 2 Supercap in Inputs 3, 4 & 5 ch1 in ch 2 in -ve rc5 control in ch1 out ch2 out -ve optional RS232 data port Input 6 (alternative) +ve ch 2 +ve ch1 -ve NAC 282 Preamplifiers NAC 202 5.3 NAC 282 Connection Panel in 1 cd in 2 in 3 tuner tape in 4 a/v Power supply/output option sockets with link and blanking plugs fitted in 5 aux 1 in 6 aux 2 signal in 6 (alternative) ground Note cd phono ch 1 ch 2 The NAC 282 AUX 2 input is provided with two sockets. The lower socket, fitted on delivery with a blanking cover, is intended for use with a Stageline or Prefix phono stage and incorporates an appropriate DC power supply. The two sockets must not be used simultaneously. 5.4 NAC 202 Connection Panel signal ground in 1 cd in 2 in 3 tuner tape in 4 a/v in 6 (alternative) The NAC 202 AUX 2 input is provided with two sockets. The upper socket, fitted on delivery with a blanking cover, is intended for use with a Stageline or Prefix phono stage or a Headline headphone amplifier and incorporates an appropriate DC power supply. The two sockets must not be used simultaneously. ch1 in ch 2 in -ve ch1 out ch2 out Inputs 1, 2 & 6 ch1 in ch 2 in +ve ch 2 +ve ch1 -ve Power supply/output option sockets with link and blanking plugs fitted cd phono ch 1 ch 2 optional RS232 data port Input 6 (alternative) Inputs 3, 4 & 5 ch1 in ch 2 in in 5 in 6 aux 1 aux 2 Note to power amplifier with preamplifier power supply aux 2 phono ch 1 ch 2 Inputs 1, 2 & 6 to NAPSC rc5 control in -ve to NAPSC (optional) rc5 control in optional RS232 data port to power amplifier with preamplifier power supply aux 2 phono ch 1 ch 2 Inputs 3, 4 & 5 ch1 in ch 2 in -ve ch1 out ch2 out Input 6 (alternative) +ve ch 2 -ve cable direction marker +ve ch1 -ve Interconnect Cables 4 to 4 pin DIN 9 Preamplifiers NAC 112 5.5 NAC 112 Connection Panel power supply/output option socket with link and blanking plug fitted to stereo power amplifier with preamplifier power supply output Note The NAC 112 AUX 2 input is provided with two sockets. The left hand socket, fitted on delivery with a blanking cover, is intended for use with a Stageline or Prefix phono stage or a Headline headphone amplifier and incorporates an appropriate DC power supply. The two sockets must not be used simultaneously. 10 aux 2 aux 1 av tape tuner cd TAPE, AV & AUX 1 Inputs ch1 in ch2 in ch1 out ch2 out -ve CD, TUNER & AUX 2 Inputs ch1 in ch2 in nc nc -ve NAC 552 NAC 552PS Preamplifiers NAC 252 Supercap 5.6 NAC 552 connection to NAC 552PS power supply NAC 552 Note For best performance the Burndy and 5 pin DIN cables should be run as close together as possible. additional signal output NAC 552PS mains in to mono or dual mono power amplifiers to stereo power amplifier 5.7 NAC 252 connection to Supercap power supply NAC 252 Note For best performance the Burndy and 5 pin DIN cables should be run as close together as possible. to stereo power amplifier Supercap mains input additional signal output to mono or dual mono power amplifiers Interconnect Cables cable direction marker NAC 552 Burndy NAC 252 Burndy 240° 5 to 5 pin DIN 11 NAC 282 Supercap Preamplifiers Hi-Cap 5.8 NAC 282 connection to Supercap power supply to NAPSC NAC 282 Note NAC 282 can also be powered by two Hi-Cap supplies. In this case they are connected to the same sockets as the two Supercap power supply cables. additional signal output Supercap mains input to stereo power amplifiers 5.9 NAC 282 connection to Hi-Cap power supply to mono or dual mono power amplifiers to NAPSC NAC 282 to stereo power amplifier Note See Page 27 for NAC 282 with multiple Hi-Caps. Hi-Cap mains input to mono or dual mono power amplifiers additional signal output cable direction marker 12 Interconnect Cables 240° 5 to 5 pin DIN NAC 202 Hi-Cap Preamplifiers NAC 112 Flatcap 2 5.10 NAC 202 connection to Hi-Cap power supply to NAPSC (optional) NAC 202 Note Note NAC 202 may also be powered by Supercap or Flatcap 2 power supplies connected in a similar manner to the Hi-Cap. The NAPSC socket to 4 pin DIN link plug must remain in place if no NAPSC is used. to stereo power amplifier to mono or dual mono power amplifiers Hi-Cap mains input additional signal output 5.11 NAC 112 connected to FLATCAP 2 power supply NAC 112 Flatcap 2 power mains input to stereo power amplifier to mono or dual mono power amplifiers cable direction marker for CD5, Headline or Stageline. Additional interconnects required. Interconnect Cables 240° 5 to 5 pin DIN 13 AV Processor AV2 6.1 AV2 Connection Panel power centre rear (sub) surr’d front out out out out mains in rc5 dig dig in out in 1 1 data video in/out switch rs232 in/out dig dig sub out in out 2 2 dig dig dig opt opt opt out in 2 in 1 Rear out ch2 -ve Analog in 3 front out ch1 ch2 ch1 in ch2 in -ve analog in 5 analog in 6 Centre out ch1 nc Analog in VI2 sub -ve -ve The AV2 features various technologies to reduce microphonic effects, in particular a compliant mounting for the main circuit boards and the DIN sockets on the rear. Some movement of the board and sockets when connecting/disconnecting is normal. analog in 3 (sys out) ch1 left analog in 4 ch2 right Analog in VI1 ch2 -ve analog in 2 (versatile) ch1 nc Front out ch2 -ve ch1 nc Analog in VI2 and VI1 - multiple mode rear in ch1 ch2 cen in sub in -ve analog in 1 (versatile) Surround out cen nc ch1 in ch2 in ch1 in ch2 in Note 14 rec out V2 -ve front in ch1 ch2 V1 surr’d in ch1 ch2 -ve AV2 NAP V175 AV Processor NAP 150 6.2 AV2 connected to NAP V175 and NAP 150 AV2 power to sub-woofer mains in NAP V175 + power mains in - - + - centre surround ch1, left + surround ch2, right NAP 150 + power mains in - - + front ch 2, right front ch1, left NAP 150 + power mains in - - rear effects ch1, left + rear effects ch 2, right With extra NAP 150 for 7.1 applications cable direction marker Interconnect Cables 4 to 4 pin DIN 15 AV2 NAC 112 AV Processor NAP 150 NAP V175 6.3 AV2 connected to NAC 112, NAP 150 and NAP V175 NAC 112 link plug and cover fitted NAP 150 + power mains in - - + front ch 2, right front ch1, left AV2 power mains in to sub-woofer NAP V175 + power mains in - surround ch1, left - + centre - + surround ch2, right cable direction marker Interconnect Cables 4 to 4 pin DIN 180° 5 to 5 pin DIN (AV2/NAC 112 special) 16 NAIT 5 Integrated Amplifier Flatcap 2 7.1 NAIT 5 Connection Panel link plugs fitted + power - - + to left loudspeaker ch1 to right loudspeaker ch2 mains input input signal signal out A out B aux 2 Tape, A/V, AUX 1, inputs ch1 in ch2 in ch1 out ch2 out aux 1 av tape CD, Tuner & Aux 2 inputs ch1 ch2 nc nc tuner cd Signal out A +V in +V in ch2 ch1 -ve -ve -ve 7.2 NAIT 5 connected to Flatcap 2 power supply NAIT 5 + power - link plug fitted - + mains input Flatcap 2 power mains input for CD5, Headline or Stageline. Additional interconnects required. cable direction marker Interconnect Cables 4 to 4 pin DIN 240° 5 to 5 pin DIN 17 NAIT 5 NAP 150 Integrated Amplifier Flatcap 2 7.3 NAIT 5 connected to NAP 150 power amplifier NAIT 5 link plug and cover fitted Note Mains power must not be connected to the NAIT 5 when it is used as a preamplifier (i.e. powered externally). NAP 150 + power mains input - - + speakers ch2 right speakers ch1 left 7.4 NAIT 5 connected to Flatcap 2 power supply and NAP 150 power amplifier NAIT 5 link plug removed, cover fitted Note Mains power must not be connected to the NAIT 5 when it is used as a preamplifier (i.e. powered externally). Flatcap 2 power mains input NAP 150 + power 18 mains input - speakers ch1 left - + speakers ch2 right cable direction marker Interconnect Cables 4 to 4 pin DIN 240° 5 to 5 pin DIN NAP 500 Power Amplifiers NAP 500PS 8.1 NAP 500 and NAP 500PS Connection Panels NAP 500 + - - + 1 to preamplifier power supply. Left, ch1. 2 right speaker ch2 left speaker ch1 to preamplifier power supply. Right, ch2. NAP 500PS mains in Input Socket 1 ch1 Input Socket 2 -ve ch 2 nc cable direction marker -ve nc Interconnect Cables NAP 500 Burndy 19 NAP 300 NAP 300PS Power Amplifiers NAP 250 8.2 NAP 300 and NAP 300PS Connection Panels NAP 300 + to preamplifier power supply. Left, ch1. - 1 left speaker ch1 - 2 + to preamplifier power supply. Right, ch2. right speaker ch2 NAP 300PS mains in Input Socket 1 ch1 Input Socket 2 -ve -ve nc ch 2 nc 8.3 NAP 250 Connection Panel - + mains in left speaker ch1 - + right speaker ch2 to preamplifier power supply Input socket ch 1 -ve ch2 cable direction marker 20 Interconnect Cables NAP 300 Burndy NAP V145 NAP 200 Power Amplifiers NAP 150 8.4 NAP V145 Connection Panel - + mains in speaker output to preamplifier power supply Input socket i/p -ve 8.5 NAP 200 Connection Panel - + mains in - left speaker ch1 + right speaker ch2 to preamplifier or power supply Input socket ch1 +ve ch 2 -ve 8.6 NAP 150 Connection Panel + power - - + left right mains speaker ch1 speaker ch2 in to preamplifier or power supply Input socket ch 2 ch1 +ve -ve 21 NAP 6-50 Power Amplifiers NAP V175 zone 1 speaker ch1, left 8.7 NAP 6-50 Connection Panel fan ventilation inlet mains input zone 3 speaker ch1, left zone 2 speaker ch1, left trigger zone 1 - + - + - + - + - + - + zone 1 speaker ch2, right zone 2 speaker ch2, right zone 2 zone 3 zone 3 speaker ch2, right Input Sockets ch2 -ve ch1 chassis ground 8.8 NAP V175 Connection Panel + - - + - + 1 power mains input left speaker ch1 centre speaker to processor right speaker ch2 Input Socket 1 nc -ve 22 2 cen nc Input Socket 2 ch2 -ve ch1 nc XPS2 Supercap Power Supplies Hi-Cap 9.1 XPS2 Connection Panel to CDS3, CDS2, CDX or CDX2 mains input Note When used with an XPS2 the CDX2 (or CDX) must be disconnected from the mains. Always switch off the player when connecting or disconnecting an XPS2. 9.2 Supercap Connection Panel 6 2 1 3 4 5 7 mains input Socket 1 Socket 2 +ve ch1 -ve +ve ch2 Sockets 3, 4, 5 +ve nc -ve +ve ch1 nc ch 2 Socket 6 NAC 252 only Socket 7 NAC 252 or SNAXO only -ve nc 9.3 Hi-Cap Connection Panel Sockets 1, 2, 3 1 2 3 4 ch1 nc ch 2 -ve Socket 4 +ve ch1 -ve +ve ch2 mains input 23 Flatcap 2 Power Supplies NAPSC 9.4 Flatcap 2 Connection Panel 1 power 2 3 4 5 mains input Note Sockets 2, 3, 4, 6 Sockets 1, 5 The Flatcap 2 features various technologies to reduce microphonic effects, in particular a compliant mounting for the main circuit boards and the DIN sockets on the rear. Some movement of the board and sockets when connecting/disconnecting is normal. +ve ch2 +ve ch1 -ve 9.5 NAPSC Connection Panel mains input 24 6 output flying lead ch 2 -ve ch1 nc NAC 252 Supercap Power Supplies Hi-Cap 9.6 NAC 252 connection to Supercap power supply NAC 252 Note For best performance the Burndy and 5 pin DIN cables should be run as close together as possible. to stereo power amplifier (not in active systems) Supercap mains input additional signal output to mono or dual mono power amplifiers (not in active systems) Note Extra Supercap, Hi-cap or Flatcap 2 for SNAXO. Supercap socket 5, Hi-cap - socket 3, Flatcap 2 - socket 2. Hi-Cap mains input to SNAXO Interconnect Cables cable direction marker 4 to 4 pin DIN 240° 5 to 5 pin DIN Burndy 25 NAC 282 NAPSC Power Supplies Supercap 9.7 NAC 282 connection to NAPSC and Supercap power supply NAC 282 NAPSC mains input to stereo power amplifiers (not in active systems) Supercap mains input to mono or dual mono power amplifiers (not in active systems) With extra Supercap for SNAXO Supercap mains input to SNAXO cable direction marker 26 Interconnect Cables 4 to 4 pin DIN 240° 5 to 5 pin DIN NAC 282 Hi-Cap Power Supplies NAPSC Flatcap 2 9.8 NAC 282 connection to Hi-Cap and NAPSC power supplies NAC 282 to stereo power amplifier NAPSC mains input Hi-Cap mains input cable direction marker to mono or dual mono power amplifiers Interconnect Cables 4 to 4 pin DIN 240° 5 to 5 pin DIN 9.9 NAC 282 connection to two Hi-Caps (or Flatcap 2s) NAC 282 to NAPSC to stereo power amplifier (not in active systems) Hi-Cap mains input Hi-Cap to mono or dual mono power amplifiers (not in active systems) mains input With extra Flatcap 2 (or Hi-cap) for SNAXO Flatcap 2 power mains input to SNAXO (using external power supply) for CD5, Headline or Stageline. Additional interconnects required 27 NAC 202 Hi-Cap Power Supplies NAPSC NAC 112 9.10 NAC 202 connection to Hi-Cap and NAPSC power supplies Flatcap 2 NAC 202 to stereo power amplifier NAPSC mains input Hi-Cap mains input cable direction marker to mono or dual mono power amplifiers Interconnect Cables 4 to 4 pin DIN 240° 5 to 5 pin DIN 9.11 NAC 112 connection to Flatcap 2 power supply cover fitted NAC 112 Flatcap 2 power for CD5, Headline or Stageline. Additional interconnects required. mains input With extra Flatcap 2 for SNAXO Flatcap 2 power 28 mains input to SNAXO for CD5, Headline or Stageline. Additional interconnects required. SNAXO 362 SNAXO 242 Active Crossovers Supercap 10.1 SNAXO 362 Connection Panel B Note A and B output sockets are identical. A Output Sockets LF MF ch1 nc ch2 output Sockets Input/PSU Socket HF input/power supply socket Supercap Power supply only +ve ch1 -ve +ve ch2 -ve 10.2 SNAXO 242 Connection Panel B Note A and B output sockets are identical. A LF Output Sockets HF ch1 nc ch2 output sockets input/power supply socket Supercap power supply only Input/PSU Socket +ve ch1 -ve +ve ch2 -ve 10.3 SNAXO 362 Connected to Supercap power supply Supercap mains input from preamplifier power supply SNAXO cable direction marker Interconnect Cables Burndy 4 to 4 pin DIN 29 SNAXO 242 Active Crossovers Hi-Cap 10.4 SNAXO 242 Connected to Hi-Cap power supply Hi-cap mains input from preamplifier power supply SNAXO Link Plug in place cable direction marker 30 Interconnect Cables 4 to 4 pin DIN 240° 5 to 5 pin DIN SNAXO 362 Active Crossovers NAP 300 10.5 SNAXO 362 connected to three NAP 300 power amplifiers Notes Left and right handed DIN to XLR cables are required. Power amplifier power supplies are not shown. Connection to three NAP 500s follows the same principle. SNAXO - - + + NAP 300 left speaker HF right speaker HF - - + + NAP 300 left speaker MF right speaker MF - - + + NAP 300 left speaker LF right speaker LF cable Interconnect Cables direction 4 pin DIN to XLR (Left) marker 4 pin DIN to XLR (Right) 31 SNAXO 362 Active Crossovers NAP 250 10.6 SNAXO 362 connected to three NAP 250 power amplifiers SNAXO - - + + NAP 250 left speaker HF right speaker HF - mains in - + + NAP 250 left speaker MF right speaker MF - mains in - + + NAP 250 mains in left speaker LF right speaker LF cable direction marker 32 Interconnect Cables 4 pin DIN to XLR SNAXO 242 Active Crossovers NAP 250 10.7 SNAXO 242 connected to two NAP 250 power amplifiers Note Connection to two NAP 200s or NAP 150s follows the same principle but with 4 pin DIN to 4 pin DIN cables. SNAXO - - + + NAP 250 left speaker HF right speaker HF - mains in - + + NAP 250 mains in left speaker LF right speaker LF cable direction marker Interconnect Cables 4 pin DIN to XLR 33 Naim Audio Limited, Southampton Road, Salisbury, England SP1 2LN Telephone: +44 (0) 1722 332266 Fax: +44 (0) 1722 412034 www.naim-audio.com Drawing No. NA601001-401
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res Page Count : 35 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:1ae3fa48-de1e-11d7-87e1-000a957d7196 Producer : Acrobat Distiller 4.05 for Macintosh Modify Date : 2003:09:03 15:51:30+01:00 Create Date : 2003:08:04 10:31:41Z Creator Tool : QuarkXPressª: AdobePS 8.6 (219) Metadata Date : 2003:09:03 15:51:30+01:00 Document ID : uuid:24eeab60-de1a-11d7-87e1-000a957d7196 Format : application/pdf Title : Connection Guide Rev D Creator : Author :EXIF Metadata provided by EXIF.tools