Manual
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 16
Anaconda is a software that allows you to run the Jupyter Notebook on your computer. Please refer to this link
for download:
https://www.anaconda.com/download/
Scroll down the page a little bit to find the following section:
Please download the Python 3.7 version of Anaconda
Then please install Anaconda using the downloaded executable.
Please execute the installer and keep click on 'Next' without changing any settings until you see this page:
Instruction Manual
Step 1. Install Anaconda
Windows User
Make sure you check the option "Add Anaconda to my PATH environment variable" before you click
"Install".
If the installer is asking you to install "MS Visual Studio Code", please ignore it.
We are now installing the required Python libraries to allow the program to execute correctly.
1. Please open CMD program with "Administrator Privilege"
On the Windows taskbar, find a circle icon and click it
Step 2. Install Required Python Libraries
Windows User
You will see a input field at the button, type "cmd"
The cmd program will show up in the window.
Please right click on it and choose "Run as administrator"
Here is the CMD window:
2. Insert the command to install the libraries:
This is the command for installation:
conda install -c conda-forge selenium pandas numpy
Copy & paste this line to the CMD window and press "Enter" key.
Then, you will see a message like the following, type 'y' and press "Enter" key.
Wait until the progress complete.
Please refer to this link: https://chromedriver.storage.googleapis.com/index.html?path=2.42/
Download Windows version Chrome Driver as:
Step 3. Download additional Lib. file and the Program
1. Download Chrome Driver
Open the downloaded .zip file and extract the "chromedriver.exe" to your Downloads folder
You will see a window shows up, change the pathe to your Download folder and click "Extract"
Open the downloaded .zip file and extract the content:
Make sure to change to destination path to your Download folder:
Open you installed Anaconda Program, you should see a window like this:
Step 4. Open Jupyter Notebook Application
1. Open Anaconda then Jupyter
To launch the Jupyter Notebook, click the "Launch" button of it.
Then, you should see you browser opens up and shows a page like this:
Navigate to your Download folder, and you should see this:
Here you will see the downloaded files instructed in the previous section. Continue to naviagate to the program
folder:
UN_Webscrpaing_WORKANA-master > scrpaing > selenium
Then, you should see this page:
Click on the Jupyter Notebook to open the program.
Here is the Jupyter Notebook program
Please use the run button to execute the notebook.
Before execution, please find the driver section of the code, the section starts with the line:
### load the chrome driver executable
2. Run the Notebook
Replace the tag to your computer user name:
To find your user name, you may check the properties information of the chromedriver.exe file.
Headed to your Downloads folder, right click on the chromedriver.exe and choose "Properties".
You will see a window like this, the location field indicated the user name:
Here, the user name is "Andy".
Please go back to the Jupyter notebook and replace the user name with yours.
If you see this window while running the program, please click "Allow".
